Factors affecting incorporation of drug into solid solution with HPMCP during solvent change co-precipitation

Current Trends in API Co-Processing: Spherical Crystallization and Co-Precipitation Techniques

Active Pharmaceutical Ingredients (APIs) do not always exhibit processable physical properties, which makes their processing in an industrial setup very demanding. These issues often lead to poor robustness and higher cost of the drug product. The issue can be mitigated by co-processing the APIs using suitable solvent media-based techniques to streamline pharmaceutical manufacturing operations. Some of the co-processing methods are the amalgamation of API purification and granulation steps. These techniques also exhibit adequate robustness for successful adoption by the pharmaceutical industry to manufacture high quality drug products. Spherical crystallization and co-precipitation are solvent media-based co-processing approaches that enhances the micromeritic and dissolution characteristics of problematic APIs. These methods not only improve API characteristics but also enable direct compression into tablets. These methods are economical and time-saving as they have the potential for effectively circumventing the granulation step, which can be a major source of variability in the product. This review highlights the recent advancements pertaining to these techniques to aid researchers in adopting the right co-processing method. Similarly, the possibility of scaling up the production of co-processed APIs by these techniques is discussed. The continuous manufacturability by co-processing is outlined with a short note on Process Analytical Technology (PAT) applicability in monitoring and improving the process.

The antisolvent coprecipitation method for enhanced bioavailability of poorly water-soluble drugs

In recent years, poorly water-soluble drug candidates in the drug development pipeline have been a challenging issue for the pharmaceutical industry. Many delivery systems such as nanocrystals, cocrystals, nanoparticles, and amorphous solid dispersions (ASDs) have been developed to overcome these problems. A large number of methods are utilized to realize the above delivery systems. Among all the preparation methods, the antisolvent coprecipitation method is a relatively simple, cost-effective method, offering many advantages over conventional methods. An overview of recent developments for each solubility enhancement approach using the antisolvent coprecipitation method is presented. This current review details a comprehensive overview of the antisolvent coprecipitation process and its properties, as well as the fundamentals for enhancing the solubility and bioavailability of poorly water-soluble drugs by nanotization, polymorph control with polymers and/or surfactants. Furthermore, this review also presents insights into the factors affecting the antisolvent coprecipitation process.

Amorphous Solid Dispersions: Utilization and Challenges in Preclinical Drug Development within AstraZeneca

The poor aqueous solubility of many active pharmaceutical ingredients (APIs) dominates much of the early drug development portfolio and poses a major challenge in pharmaceutical development. Polymer-based amorphous solid dispersions (ASDs) are becoming increasingly common and offer a promising formulation strategy to tackle the solubility and oral absorption issues of these APIs. This review discusses the design, manufacture, and utilisation of ASD formulations in preclinical drug development, with a key focus on the pre-formulation assessments and workflows employed at AstraZeneca.

Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies

Amorphous solid dispersions (ASDs) are popular for enhancing the solubility and bioavailability of poorly water-soluble drugs. Various approaches have been employed to produce ASDs and novel techniques are emerging. This review provides an updated overview of manufacturing techniques for preparing ASDs. As physical stability is a critical quality attribute for ASD, the impact of formulation, equipment, and process variables, together with the downstream processing on physical stability of ASDs have been discussed. Selection strategies are proposed to identify suitable manufacturing methods, which may aid in the development of ASDs with satisfactory physical stability.

Hierarchical Particle Approach for Co-Precipitated Amorphous Solid Dispersions for Use in Preclinical In Vivo Studies

Amorphous solid dispersions (ASD) have become a well-established strategy to improve exposure for compounds with insufficient aqueous solubility. Of methods to generate ASDs, spray drying is a leading route due to its relative simplicity, availability of equipment, and commercial scale capacity. However, the broader industry adoption of spray drying has revealed potential limitations, including the inability to process compounds with low solubility in volatile solvents, inconsistent molecular uniformity of spray dried amorphous dispersions, variable physical properties across batches and scales, and challenges containing potent compounds. In contrast, generating ASDs via co-precipitation to yield co-precipitated amorphous dispersions (cPAD) offers solutions to many of those challenges and has been shown to achieve ASDs comparable to those manufactured via spray drying. This manuscript applies co-precipitation for early safety studies, developing a streamlined process to achieve material suitable for dosing as a suspension in conventional toxicity studies. Development targets involved achieving a rapid, safely contained process for generating ASDs with high recovery yields. Furthermore, a hierarchical particle approach was used to generate composite particles where the cPAD material is incorporated in a matrix of water-soluble excipients to allow for rapid re-dispersibility in the safety study vehicle to achieve a uniform suspension for consistent dosing. Adopting such an approach yielded a co-precipitated amorphous dispersion with comparable stability, thermal properties, and in vivo pharmacokinetics to spray dried amorphous materials of the same composition.

Physical Stability and Dissolution of Lumefantrine Amorphous Solid Dispersions Produced by Spray Anti-Solvent Precipitation

This study aims to develop amorphous solid dispersion (ASD) of lumefantrine with a cost-effective approach of spray anti-solvent precipitation. Four acidic polymers, hydroxypropylmethylcellulose phthalate (HPMCP), hydroxypropylmethylcellulose acetate succinate (HPMCAS), poly(methacrylic acid–ethyl acrylate) (EL100) and cellulose acetate phthalate (CAP) were studied as excipients at various drug-polymer ratios. Of the studied polymers, satisfactory physical stability was demonstrated for HPMCP- and HPMCAS-based ASDs with no observed powder X-ray diffraction peaks for up to 3 months of storage at 40 °C/75% RH. HPMCP and HPMCAS ASDs also achieved greater drug release levels in the dissolution study than other polymers. The HPMCP-based ASDs with a drug:polymer ratio of 2:8 exhibited a maximum drug release of 140 μg/mL for up to 2 h, which is significantly higher than the currently marketed formulation of Coartem® (<80 ng/mL). Relatively, the CAP and EL100 ASDs indicated a higher water content and crystallized within a day when stored at 40 °C/75% RH. The choice of polymer, and the drug-polymer ratio played a crucial role in the solubility enhancement of lumefantrine. Our study indicates that the developed spray anti-solvent precipitation method could be an affordable approach for producing ASDs.

Potential of solid dispersions to enhance solubility, bioavailability, and therapeutic efficacy of poorly water-soluble drugs: newer formulation techniques, current marketed scenario and patents

In the last few decades, solid dispersion (SD) technology had been studied as an approach to produce an amorphous carrier to enhance the solubility, dissolution rate, and bioavailability of poorly water-soluble drugs. The use of suitable carrier and methodology in the preparation of SDs play a significant role in the biological behavior of the SDs. SDs have been prepared using a variety of pharmaceutically acceptable polymers utilizing various novel technologies. In the recent years, much attention has been paid toward the use of novel carriers and methodologies in exploring novel types of SDs to enhance therapeutic efficacy and bioavailability. The use of novel carriers and methodologies would be very beneficial for formulation scientists to develop some SDs-based formulations for their commercial use and clinical applications. In the present review, current literature of novel methodologies for SD preparation to enhance the dissolution rate, solubility, therapeutic efficacy, and bioavailability of poorly water-soluble drugs has been summarized and analyzed. Further, the current status of SDs, patent status, and future prospects have also been discussed.

FDM-printed pH-responsive capsules for the oral delivery of a model macromolecular dye

To this day, the oral delivery of biomacromolecules remains a major developmentally-oriented challenge. A combinatorial approach was followed at this study, to formulate an efficient carrier for the in vitro delivery of a model macromolecule, fluorescein isothiocyanate-dextran 4 kDa (FD4). The model macromolecule was formulated in a self-assembling peptide hydrogel (ac-(RADA)₄-CONH₂), prior to deposition in a hydroxypropyl methylcellulose-phthalate (HPMCP)-based 3D-printed capsule. Loading of FD4 was investigated for potential alterations on the structural (AFM) and gelling properties of the peptide carrier. Thermal analysis and morphological properties of the 3D-printed capsules were assessed by TGA, DSC and microscopy studies. For the peptide hydrogel, similar release profiles of FD4 were recorded in simulated gastric fluid pH 1.2 and phosphate buffer saline pH 7.4, indicating the need for a structural barrier, to protect the peptide carrier from the acidic environment of the stomach. The pH responsive character of the HPMCP-based capsule was evidenced in the release profiles of FD4 in a sequence of release media, i.e. simulated gastric fluid pH 1.2, simulated intestinal fluid pH 6.8 and phosphate buffer saline pH 7.4. The results supported the combinatorial formulation approach as a promising system for the efficient oral delivery of biomacromolecules.

Building a better particle: Leveraging physicochemical understanding of amorphous solid dispersions and a hierarchical particle approach for improved delivery at high drug loadings

Amorphous solid dispersions are a promising option for managing compounds with poor aqueous solubility. However, for compounds with high melting points, thermal stability limitations, or poor solubility in volatile solvents, conventional routes of hot melt extrusion or spray drying may not be viable. Co-precipitated amorphous dispersions (cPAD) can provide a solution. For the material studied in this paper, the cPAD material that was seemingly identical to spray dried material in terms of being single phase amorphous (as measured by DSC and XRD ) but showed slower dissolution behavior. It was identified that physical properties of the cPAD material could be improved to enhance wettability and improve dissolution performance. This was achieved by incorporating the cPAD material into a matrix of water soluble excipients generated via evaporative isolation routes. Importantly, this approach appears to offer another route to further increase the drug load in final dosage units and is significant as increased drug loading generally results in slower or incomplete release. Results showed successful proof of concept via in vitro biorelevant dissolution and confirmatory canine pharmacokinetic studies yielding comparable exposure for capsules comprised of conventional spray dried material as well as capsules with elevated drug load comprised of cPAD hierarchical particles.

Effects of the Preparation Process on the Properties of Amorphous Solid Dispersions

The use of amorphous solid dispersions to improve the bioavailability of active ingredients from the BCS II and IV classifications continues to gain interest in the pharmaceutical industry. Over the last decade, methods for generating amorphous solid dispersions have been well established in commercially available products and in the literature. However, the amorphous solid dispersions manufactured by different technologies differ in many aspects, primarily chemical stability, physical stability, and performance, both in vitro and in vivo. This review analyzes the impact of manufacturing methods on those properties of amorphous solid dispersions. For example, the chemical stability of drugs and polymers can be influenced by differences in the level of thermal exposure during fusion-based and solvent-based processes. The physical stability of amorphous content varies according to the thermal history, particle morphology, and nucleation process of amorphous solid dispersions produced by different methods. The in vitro and in vivo performance of amorphous formulations are also affected by differences in particle morphology and in the molecular interactions caused by the manufacturing method. Additionally, we describe the mechanism of manufacturing methods and the thermodynamic theories that relate to amorphous formulations.

Producing Amorphous Solid Dispersions via Co-Precipitation and Spray Drying: Impact to Physicochemical and Biopharmaceutical Properties

Many small-molecule active pharmaceutical ingredients (APIs) exhibit low aqueous solubility and benefit from generation of amorphous dispersions of the API and polymer to improve their dissolution properties. Spray drying and hot-melt extrusion are 2 common methods to produce these dispersions; however, for some systems, these approaches may not be optimal, and it would be beneficial to have an alternative route. Herein, amorphous solid dispersions of compound A, a low-solubility weak acid, and copovidone were made by conventional spray drying and co-precipitation. The physicochemical properties of the 2 materials were assessed via X-ray diffraction, differential scanning calorimetry, thermal gravimetric analysis, and scanning electron microscopy. The amorphous dispersions were then formulated and tableted, and the performance was assessed in vivo and in vitro. In human dissolution studies, the co-precipitation tablets had slightly slower dissolution than the spray-dried dispersion, but both reached full release of compound A. In canine in vitro dissolution studies, the tablets showed comparable dissolution profiles. Finally, canine pharmacokinetic studies showed that the materials had comparable values for the area under the curve, bioavailability, and C_max. Based on the summarized data, we conclude that for some APIs, co-precipitation is a viable alternative to spray drying to make solid amorphous dispersions while maintaining desirable physicochemical and biopharmaceutical characteristics.

Physical stabilization of low-molecular-weight amorphous drugs in the solid state: a material science approach

Use of the amorphous state is considered to be one of the most effective approaches for improving the dissolution and subsequent oral bioavailability of poorly water-soluble drugs. However as the amorphous state has much higher physical instability in comparison with its crystalline counterpart, stabilization of amorphous drugs in a solid-dosage form presents a major challenge to formulators. The currently used approaches for stabilizing amorphous drug are discussed in this article with respect to their preparation, mechanism of stabilization and limitations. In order to realize the potential of amorphous formulations, significant efforts are required to enable the prediction of formulation performance. This will facilitate the development of computational tools that can inform a rapid and rational formulation development process for amorphous drugs.

Fast-track to a solid dispersion formulation using multi-way analysis of complex interactions

Several factors with complex interactions influence the physical stability of solid dispersions, thus highlighting the need for efficient experimental design together with robust and simple multivariate model. Design of Experiments together with ANalysis Of VAriance (ANOVA) model is one of the central tools when establishing a design space according to the Quality by Design (QbD) approach. However, higher order interaction terms are often significant in these ANOVA models, making the final model difficult to interpret and understand. As this is ordinarily the purpose of applying ANOVA, it poses an obvious problem. In the current study, the GEneralized Multiplicative ANOVA (GEMANOVA) model is proposed as an alternative for the ANOVA model. Two complex multivariate data sets obtained by monitoring the physical stability of a solid dispersion with image analysis and X-ray powder diffraction (XRPD) as responses were subjected to GEMANOVA analysis. The results showed that the obtained GEMANOVA model was easier to interpret and understand than the additive ANOVA model. Furthermore, the GEMANOVA model has additional advantages such as the possibility of readily including multivariate responses (e.g., an entire spectral data set), model uniqueness, and curve resolution abilities.

Investigations on factors affecting chitosan for dissolution enhancement of oxcarbazepine by spray dried microcrystal formulation with an experimental design approach

In the present work effect of chitosan on microcrystal formulation for dissolution enhancement of oxcarbazepine using controlled crystallization technique coupled with spray drying was explored. The work was extended for exploration of simplified approach for stable particle size reduction. The study was performed with an experimental design approach i. e. a fractional factorial design of resolution 5 (with all 2 factor interaction) for the screening of predefined independent variables drug concentration, chitosan concentration, feed rate, inlet temperature and percent aspiration for spray drying. Whereas percent drug dissolved, wettability time, flowability in terms of angle of repose and particle size were designated as response variables. Resultant models were analyzed using multiple linear regression analysis, which generated equation to plot response surface curves along with desirability function. Results showed that chitosan concentration had significant effect on dissolution enhancement of oxcarbazepine at a level of 2% w/v. Increase in drug concentration showed decreased dissolution rate however on particle size it did not show statistically significant effect. Topographical characterization was carried out by SEM which showed that feed rate, percent aspiration and inlet temperature had significant effect on particle morphology. For deriving optimized formulation results were analyzed using desirability function for the maximum percent drug dissolved and least drug polymer matrix particle size. DSC studies showed that drug was molecularly associated with chitosan matrix or particles.

Blends of reverse enteric polymer with Enteric and pH-independent polymers: mechanistic investigations for tailoring drug release

Blends of conventional reverse enteric polymer with enteric polymers result in insoluble polyelectrolyte complexes and hence cannot be used in film coatings. We report a new set of miscible blends of a new reverse enteric polymer (NREP) synthesized by us with enteric and pH-independent polymers. The nature of interactions between polymers in the blends has been established by analyzing Fourier transform infrared (FTIR) spectra. The extent of interaction has been investigated by thermal analysis and quantified in terms of parameters K1 and K2 in the Schneider equation. Based on these values, the interactions between NREP and these polymers have been ranked in the order EC (ethylcellulose) < ES (Eudragit S) < HPMCP (hydroxypropyl methylcellulose phthalate). The quantification of interactions in blends helps explain the release pattern of cefuroxime axetil (CA) at gastric pH and tailor the release of other drugs according to their pharmacokinetic characteristics. The understanding also provides a more rational approach for selection of polymers and their content in the coating compositions, rather than an empirical approach.

Effect of hydrophilic swellable polymers on dissolution enhancement of carbamazepine solid dispersions studied using response surface methodology

The objective of this work was to study dissolution enhancement efficiency and solid dispersion formation ability of hydrophilic swellable polymers such as sodium carboxymethyl cellulose (Na-CMC), sodium starch glycolate (SSG), pregelatinized starch (PGS), and hydroxypropylmethyl cellulose (HPMC) with carbamazepine using 3(2) full factorial design for each of the polymers. Solid dispersions of carbamazepine were prepared using solvent evaporation method with around 70% solvent recovery. The independent variables were the amount of polymer and organic solvent. The dependent variables assessed were percentage drug dissolved at various time points and dispersion efficiency (ie, in terms of particle size of solid dispersion). Solid dispersions were evaluated for percentage drug dissolved, wettability, differential scanning calorimetry, scanning electron microscopy, and angle of repose. Multiple linear regression of results obtained led to equations, which generated contour plots to relate the dependent variables. Similarity factor and mean dissolution time were used to compare dissolution patterns obtained in distilled water and simulated gastric fluid United States Pharmacopeia (USP) XXVI of pH 1.2. Maximum drug dissolution was obtained with polymer order Na-CMC>SSG>PGS>HPMC. Particle size of drug was reduced ~10-15, 3-5, 5-7, and 10-25 times in Na-CMC, SSG, PGS, and HPMC solid dispersions, respectively; whereas wettability of solid dispersions was found in the order of Na-CMC>HPMC>PGS>SSG. Angle of repose was found to be in the range of 29 degrees to 35 degrees for all solid dispersions, which shows good flowability characteristics. HPMC showed increase in drug dissolution up to an optimized level; however, further increase in its concentration decreased drug dissolution.

Preparation of two-drug composite microparticles to improve the dissolution of insoluble drug in water for use with a 4-fluid nozzle spray drier

In this study, we used a novel 4-fluid nozzle spray drier to prepare composite microparticles of a water-insoluble drug, flurbiprofen (FP), and a water-soluble drug, sodium salicylate (SS), for the purpose of improving the water solubility of FP. An ethanol solution of FP and an aqueous SS solution were simultaneously introduced through different liquid passages in the 4-fluid nozzle spray drier and then spray-dried. Quantitative elemental analysis suggested that the FP/SS ratio in each composite microparticle was nearly the same as the formulation ratio. We also found that SS and FP exist in a low crystallinity state in the composite particles. Release of FP from dissolved composite microparticles was markedly improved because of an increase in the effective surface area following rapid dissolution of SS. This study shows that it is possible to prepare FP-SS composite microparticles using a 4-fluid nozzle spray drier in single process and that this can improve the ability of FP to dissolve in water.

Release of Poorly Soluble Drugs from HPMC Tablets Studied by FTIR Imaging and Flow-Through Dissolution Tests

Spectroscopic imaging and a flow-through dissolution test have been combined to improve the possibilities of investigating the release of a poorly soluble drug (diclofenac) from pharmaceutical tablets. The presented methods aim to overcome the limitations that impede the conventional dissolution test because of its inability to observe precipitates of poorly soluble drug during tablet dissolution. The proposed flow-through set-up allows small drug particles that are being carried along in the water-flow to be analyzed, by adding a dissolution agent to the medium after it left the tablet cell. Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopic imaging provides an insight into the processes inside the tablet and is not hindered by insoluble or recrystallising drug. The techniques have been hyphenated and used to study tablets containing diclofenac sodium and HPMC (hydroxypropyl methylcellulose) in different dissolution media that influence the solubility of the drug. The release profiles obtained by flow-through dissolution test suggest the presence of particles (or precipitates) in the dissolution medium. This is consistent with the results obtained by FTIR imaging, which confirms that both proposed techniques are superior to the ordinary dissolution test when applied to poorly soluble drugs. FTIR imaging data have been analyzed by a classical least squares analysis, corrected for the parts of the tablet outside the field of view, and used to calculate the release profile. The infrared spectra of diclofenac at varying relative humidity were acquired to study the interactions of diclofenac and water, including identification of dissociated diclofenac, thus the chemical specificity of FTIR imaging was fully utilized.