Rapid differentiation between clinically relevant mycobacteria in microscopy positive clinical specimens and mycobacterial isolates by line probe assay

Infrapatellar bursitis with Mycobacterium malmoense related to immune reconstitution inflammatory syndrome in an HIV-positive patient

The immune reconstitution inflammatory syndrome (IRIS) after starting antiretroviral treatment for HIV infection can be caused by a great variety of pathogens. Among these are non-tuberculous mycobacteria (NTM), with Mycobacterium avium complex being the most commonly described finding. Antimycobacterial treatment of NTM in cases of IRIS is controversial. We report the case of a 39-year-old man diagnosed with HIV-1 infection during admission to hospital with Pneumocystis jirovecii pneumonia (PCP) and a CD4 cell count of 60/μl. The patient started antiretroviral treatment and made an uneventful recovery from the PCP diagnosis, but was readmitted after 2.5 months with a purulent infrapatellar bursitis on the left knee. A surgical procedure was performed and Mycobacterium malmoense was grown from the pus from the bursa. The patient recovered without supplemental antimycobacterial treatment. To our knowledge, this is the first report on IRIS caused by M malmoense.

Rapid method for identification of six common species of mycobacteria based on multiplex SNP analysis

A multiplex method using the SNaPshot technique was developed to screen for six common mycobacterial species: Mycobacteria tuberculosis, M. avium, M. intracellulare, M. chelonae, M. kansasii, and M. gordonae. A total of 468 mycobacterial clinical isolates were subjected to analysis for the presence of the six mycobacterial species by the multiplex SNaPshot method. Of the 468 mycobacterial isolates, 464 (99.15%) could be correctly identified by this assay. The multiplex SNaPshot technique is a promising discriminatory tool for rapid and accurate identification of frequently encountered clinical mycobacterial species.

Multidrug-resistant tuberculosis: rapid detection of resistance to rifampin and high or low levels of isoniazid in clinical specimens and isolates

The aim of the present study was to evaluate a new improved multiplex polymerase chain reaction (PCR) hybridisation assay to detect multidrug-resistant tuberculosis. The assay, developed to detect rifampin (rpoB) and isoniazid (katG) gene mutations causing Mycobacterium tuberculosis resistance, was recently extended to include inhA gene mutations that code for low-level isoniazid resistance. Interpretable results were obtained in 115 isolates and in all smear-positive clinical specimens. Rifampin resistance was correctly identified in all specimens and in 20 of 21 (95%) multidrug-resistant isolates compared to BACTEC 460TB. Isoniazid resistance correlated in 18 of 22 (82%) specimens, in 31 of 31 (100%) high-level and 24 of 28 (86%) low-level isoniazid-resistant isolates. The assay was rapid, easy to perform and directly applicable in smear-positive specimens. We predict that the assay may be a useful tool to combat and prevent new cases of multi- and extensively drug-resistant tuberculosis.

Rapid diagnostic testing for mycobacterial infections

Tests based on nucleic acid amplification can rapidly detect mycobacteria in clinical samples. These appear to be promising and may change how mycobacterial diseases are diagnosed in the future. Utilization of nucleic acid hybridization and DNA sequencing has enabled the identification of mycobacteria to the species level and detection of mutations associated with antimicrobial resistance. Combining nucleic acid amplification with genotypic identification methods allows detection and identification of mycobacteria directly in clinical samples and, to a limited extent, detection of antimicrobial resistance. IFN-gamma-based assays provide results faster than the tuberculin skin test and address many of its shortcomings, and are thus poised to replace the latter in the coming years.

Use of a novel multiplex probe array for rapid identification of Mycobacterium species from clinical isolates

Conventional identification of mycobacteria is based on the analysis of their phenotypic and biochemical characteristics after culture; thus this method is time-consuming, laborious, and is not always conclusive. Developing a fast and accurate method for rapid identification of Mycobacterium species is in urgent need for early diagnosis of mycobacteriosis and effective patient management. In this study, an efficient and affordable novel multiplex probe array which allows simultaneous identification of 15 medically important mycobacterial species was developed. A pair of genus-specific primers and a set of genus- and species-specific probes were designed according to the conserved and polymorphic regions of the 16S rRNA gene, internal transcribed spacer (ITS) sequence, and 23S rRNA gene of mycobacteria. This probe array was applied for the identification of 78 clinical mycobacterial isolates recovered from Henan, China. The results showed that the specificity and sensitivity of the probe array were 100% for both genus-specific probe and Mycobacterium tuberculosis complex-specific probe. Among 52 isolates of nontuberculous mycobacteria, 43 isolates (82.7%) can be rapidly identified to the species level. Genetic variability of 16S-23S rRNA gene ITS region in M. avium, M. intracellulare, M. chelonae, M. abscessus and M. fortuitum were analyzed. With the accumulation of the sequences of ITS identified and further optimization of probes, the multiplex probe array has the potential to be developed into a practical tool for rapid and accurate identification of mycobacterial species in clinical laboratory.

Rapid genotypic detection of rifampin- and isoniazid-resistant Mycobacterium tuberculosis directly in clinical specimens

A multiplex PCR DNA strip assay (Genotype MTBDR) designed to detect rifampin (rpoB) and high-level isoniazid (katG) resistance mutations in Mycobacterium tuberculosis isolates was optimized for clinical specimens. Successful genotypic results were achieved with 36 of 38 (95%) smear-positive respiratory specimens, allowing rapid therapeutic adjustments in transmittable drug-resistant tuberculosis.

Detection of Mycobacterium tuberculosis complex in formalin-fixed, paraffin-embedded tissue specimens with necrotizing granulomatous inflammation by strand displacement amplification

Rapid, reliable diagnosis of tuberculosis is essential to initiate correct treatment, avoid severe complications, and prevent transmission. Conventional microbiological methods may not be an option if samples are formalin-fixed and paraffin-embedded (FFPE) for histopathological examination. With the demonstration of necrotizing granulomatous inflammation, tuberculosis becomes an important differential diagnosis, although it was not initially suspected. Following paraffin extraction, BDProbeTec ET strand displacement amplification for detection of Mycobacterium tuberculosis complex (MTC) was applied to 47 prospectively and 19 retrospectively collected FFPE samples from various sources with granulomatous inflammation and results were compared to tuberculosis notification. Of the prospective samples, 20 were from patients who were notified as having tuberculosis and the assay was positive in 18 (90%). Specificity was 100%. For 27 of the patients with prospectively collected FFPE specimens, culture was performed on a specimen collected at a later date from the same location. Culture revealed MTC in 14 and nontuberculous mycobacteria in four. BDProbeTec ET was positive in 13 (92.8%) of the patients with positive MTC culture and negative in the remaining. The sensitivity and specificity in 19 archival samples was 40% and 100%, respectively, compared to notification data. The assay provided rapid, correct diagnosis on different sources of FFPE samples collected prospectively and therefore offers an important supplementary method for patients where tuberculosis was not initially suspected.

Molecular genetic methods for diagnosis and antibiotic resistance detection of mycobacteria from clinical specimens

Mycobacteria comprise a diverse group of bacteria that are widespread in nature, some of which cause significant disease in humans. Members of the Mycobacterium tuberculosis complex (MTBC) are the most important human pathogens of the genus Mycobacterium. Traditional methods for detection and identification of mycobacteria include microscopy, culture and phenotypic tests. These methods either lack sensitivity, specificity, or are time consuming. Advances in the field of molecular biology have provided rapid diagnostic tools that have reduced the turnaround times for detecting MTBC and drug resistance in cultures and directly in clinical specimens from weeks to days. This review discusses the molecular genetic techniques for detecting and identifying MTBC as well as drug resistance of mycobacteria in clinical specimens.

Improved sensitivity of nucleic acid amplification for rapid diagnosis of tuberculous meningitis

Early diagnosis of tuberculous meningitis (TBM) is essential for a positive outcome; but present microbiological diagnostic techniques are insensitive, slow, or laborious. We evaluated the standard BDProbeTec ET strand displacement amplification method (the standard ProbeTec method) for the detection of Mycobacterium tuberculosis complex organisms in parallel with the ProbeTec method with a modified pretreatment procedure with 101 prospectively collected cerebrospinal fluid specimens from 94 patients with suspected TBM. By the modified method, the sample-washing step was omitted. A definitive diagnosis was attained by culture. Thirteen specimens from 12 patients were culture positive for M. tuberculosis complex organisms; three specimens (23%) were microscopy positive for acid-fast bacilli. Among the culture-positive specimens, the standard ProbeTec method was positive for 8 (61.5%) and the modified assay was positive for 10 (76.9%). The overall specificity by both procedures was 98.8% compared to the results of culture. After discrepancy analysis, conducted by reviewing the patients' previous laboratory data, the specificity increased to 100%. If the cutoff value for respiratory specimens was adjusted from the recommended value of 3,400 to 1,000, the sensitivity of the modified procedure increased to 84.7%, with unchanged specificity. Results were obtained in 3 to 4 h. The new pretreatment procedure with the ProbeTec assay described here provides a rapid, simple, and sensitive tool for the diagnosis of TBM.

Routine use of a simple low-cost genotypic assay for the identification of mycobacteria in a high throughput laboratory

A novel polymerase chain reaction (PCR)-restriction fragment length polymorphism analysis (PRA) of the hsp65 gene was used for the routine identification of mycobacteria in a high throughput clinical laboratory. A total of 2036 clinical isolates were tested by PRA in conjunction with other methods. The PRA identification of M. tuberculosis complex was 100% sensitive and specific, and 74.5% of nontuberculous mycobacteria (NTM) were correctly identified. It gave highly consistent results for Mycobacterium avium complex (MAC) species and for most isolates of M. fortuitum, M. chelonae, and M. kansasii. It had proven to be highly robust and stable despite usage on such a large-scale and is thus particularly suitable for use in high throughput laboratories in areas with a high incidence of tuberculosis.

Direct detection of multidrug-resistant Mycobacterium tuberculosis in clinical specimens in low- and high-incidence countries by line probe assay

The INNO-LiPA Rif.TB assay is designed for the detection of rpoB gene mutations causing rifampin resistance in isolates. We applied the method directly to 60 Lithuanian and Danish clinical specimens to detect rifampin resistance rapidly. Results were obtained in 78.3% of clinical specimens, and all were concordant with those obtained by BACTEC 460. The assay could have major impact on the management of multidrug-resistant tuberculosis.