Repair of patellar tendon injuries using a cell-collagen composite

Biology and physiology of tendon healing

Tendon disorders affect people of all ages, from elite and recreational athletes and workers to elderly patients. After an acute injury, 3 successive phases are described to achieve healing: an inflammatory phase followed by a proliferative phase, and finally by a remodeling phase. Despite this process, healed tendon fails to recover its original mechanical properties. In this review, we proposed to describe the key factors involved in the process such as cells, transcription factors, extracellular matrix components, cytokines and growth factors and vascularization among others. A better understanding of this healing process could help provide new therapeutic approaches to improve patients' recovery while tendon disorders management remains a medical challenge.

Gluteal Tendinopathy: Critical Analysis Review of Current Nonoperative Treatments

» Gluteal tendinopathy/greater trochanteric pain syndrome (GTPS) is the most prevalent of all lower limb tendinopathies, affecting 1 in 4 women older than 50 years and commonly individuals within their fifth and sixth decades of life regardless of activity level.» The condition is believed to originate from age-related degenerative changes about the hip abductor tendon insertions and the surrounding bursae, and is exacerbated by congenital and acquired abnormal hip biomechanics.» Treatment of gluteal tendinopathy/GTPS often begins with noninvasive nonoperative modalities such as activity modifications, nonsteroidal anti-inflammatory drugs, and physical therapy. For recalcitrant symptoms, additional nonoperative therapies have been used; however, there remains a lack of comparative efficacy between these adjunct treatments.» In this article, we examine the available literature regarding the nonoperative management of gluteal tendinopathy/GTPS and provide insight into the effectiveness of current treatment modalities.

Safety and Efficacy of Bone Marrow-Derived Mesenchymal Stem Cells for Chronic Patellar Tendinopathy (With Gap >3 mm) in Patients: 12-Month Follow-up Results of a Phase 1/2 Clinical Trial

Background

In a previous study, the authors found that at 6 months after treatment with a 20 × 106 dose of bone marrow-derived mesenchymal stem cells (BM-MSCs), patients showed improved tendon structure and regeneration of the gap area when compared with treatment using leukocyte-poor platelet-rich plasma (Lp-PRP). The Lp-PRP group (n = 10), which had not seen tendon regeneration at the 6-month follow-up, was subsequently offered treatment with BM-MSCs to see if structural changes would occur. In addition, the 12-month follow-up outcomes of the original BM-MSC group (n = 10) were evaluated.

Purpose

To evaluate the outcomes of all patients (n = 20) at 12 months after BM-MSC treatment and observe if the Lp-PRP pretreated group experienced any type of advantage.

Study Design

Cohort study; Level of evidence, 2.

Methods

Both the BM-MSC and original Lp-PRP groups were assessed at 12 months after BM-MSC treatment with clinical examination, the visual analog scale (VAS) for pain during daily activities and sports activities, the Victorian Institute of Sport Assessment-Patella score for patellar tendinopathy, dynamometry, and magnetic resonance imaging (MRI). Differences between the 2 groups were compared with the Student t test.

Results

The 10 patients originally treated with BM-MSCs continued to show improvement in tendon structure in their MRI scans (P < .0001), as well as in the clinical assessment of their pain by means of scales (P < .05). Ten patients who were originally treated with Lp-PRP and then with BM-MSCs exhibited an improvement in tendon structure in their MRI scans, as well as a clinical pain improvement, but this was not significant on the VAS for sports (P = .139). Thus, applying Lp-PRP before BM-MScs did not yield any type of advantage.

Conclusion

The 12-month follow-up outcomes after both groups of patients (n = 20) received BM-MSC treatment indicated that biological treatment was safe, there were no adverse effects, and the participants showed a highly statistically significant clinical improvement (P < .0002), as well as an improvement in tendon structure on MRI (P < .0001). Preinjection of Lp-PRP yielded no advantages.

Biomaterials for Tissue-Engineered Treatment of Tendinopathy in Animal Models: A Systematic Review

To conduct a systematic review of studies reporting the treatment of tendon injury using biomaterials in animal models. A systematic search was conducted to retrieve studies involving animal models of tendon repair using biomaterials, in PubMed (database construction to August 2022) and Ovid-Embase (1946 to August 2022). Data related to tendon repair with biomaterials were extracted by two researchers, respectively. Risk of bias was assessed following the Cochrane Handbook for Systematic Reviews of Interventions. A statistical analysis was performed based on the classification of tendon repair biomaterials included in our study. A total of 8413 articles were retrieved, with 78 studies included in our analysis. For tendon repair in animal models using biomaterials, the most commonly seen characteristics were as follows: naturally derived biomaterials, rabbits and rats as animal models, surgery as the injury model, and the Achilles tendon as the injury site. The histology and biomechanical recovery of tendon injury following repair are affected by different biomaterials. Studies of tendon repair in animal models indicate that biomaterials can significantly improve repair outcomes, including tendon structure and biomechanics. Among effective biomaterial strategies are the use of new composites and incorporation of cells or growth factors into the material, both of which provide obvious benefits for tendon healing. More high-quality preclinical studies are required to encourage the translation of biomaterials into clinical practice for tendon repair.

An overview of the material science and knowledge of nanomedicine, bioscaffolds, and tissue engineering for tendon restoration

Tendon wounds are a worldwide health issue affecting millions of people annually. Due to the characteristics of tendons, their natural restoration is a complicated and lengthy process. With the advancement of bioengineering, biomaterials, and cell biology, a new science, tissue engineering, has developed. In this field, numerous ways have been offered. As increasingly intricate and natural structures resembling tendons are produced, the results are encouraging. This study highlights the nature of the tendon and the standard cures that have thus far been utilized. Then, a comparison is made between the many tendon tissue engineering methodologies proposed to date, concentrating on the ingredients required to gain the structures that enable appropriate tendon renewal: cells, growth factors, scaffolds, and scaffold formation methods. The analysis of all these factors enables a global understanding of the impact of each component employed in tendon restoration, thereby shedding light on potential future approaches involving the creation of novel combinations of materials, cells, designs, and bioactive molecules for the restoration of a functional tendon.

Bioactive Decellularized Tendon-Derived Stem Cell Sheet for Promoting Graft Healing After Anterior Cruciate Ligament Reconstruction

BACKGROUND

Stem cell sheets provide a scaffold-free option for the promotion of graft healing after anterior cruciate ligament reconstruction (ACLR). However, cell viability, stability, and potential uncontrolled actions create challenges for clinical translation. The decellularization of cell sheets may overcome these problems as studies have shown that the natural extracellular matrix of stem cells is bioactive and can promote tissue repair.

HYPOTHESIS

The decellularized tendon-derived stem cell (dTDSC) sheet can promote graft healing after ACLR.

STUDY DESIGN

Controlled laboratory study.

METHODS

An optimized decellularization protocol was developed to decellularize the TDSC sheets. A total of 64 Sprague-Dawley rats underwent ACLR with or without the dTDSC sheet wrapping the tendon graft (n = 32/group). At 2 and 6 weeks after surgery, graft healing was assessed by micro-computed tomography, histology, and biomechanical testing. The accumulation of iNOS⁺ and CD206⁺ cells and the expression of metalloproteinase 1 (MMP-1), MMP-13, and tissue inhibitor of metalloprotease 1 (TIMP-1) were assessed by immunohistochemistry.

RESULTS

The decellularization was successful, with the removal of 98.4% nucleic acid while preserving the collagenous proteins and bioactive factors. The expression of bone morphogenetic protein 2 (BMP-2) and VEGF in the dTDSC sheet was comparable with the TDSC sheet (P > .05). Micro-computed tomography showed significantly more tunnel bone formation in the dTDSC sheet group. The dTDSC sheet group demonstrated better graft osteointegration and higher integrity of graft midsubstance with significantly higher ultimate failure load (16.58 ± 7.24 vs 8.93 ± 2.45 N; P = .002) and stiffness (11.97 ± 5.21 vs 6.73 ± 2.20 N/mm; P = .027). Significantly fewer iNOS⁺ cells but more CD206⁺ cells, as well as lower MMP-1 and MMP-13 but higher TIMP-1 expression, were detected at the tendon-bone interface and graft midsubstance in the dTDSC sheet group.

CONCLUSION

An optimized decellularization protocol for producing bioactive dTDSC sheets was developed. Wrapping tendon graft with a dTDSC sheet promoted graft healing after ACLR, likely via enhancing bone formation and angiogenesis by BMP-2 and VEGF, modulating macrophage polarization and MMP/TIMP expression, and physically protecting the tendon graft.

CLINICAL RELEVANCE

dTDSC sheets alleviate the quality control and safety concerns of cell transplantation and can be used as a cell-free alternative for the promotion of graft healing in ACLR.

Advanced strategies for constructing interfacial tissues of bone and tendon/ligament

Enthesis, the interfacial tissue between a tendon/ligament and bone, exhibits a complex histological transition from soft to hard tissue, which significantly complicates its repair and regeneration after injury. Because traditional surgical treatments for enthesis injury are not satisfactory, tissue engineering has emerged as a strategy for improving treatment success. Rapid advances in enthesis tissue engineering have led to the development of several strategies for promoting enthesis tissue regeneration, including biological scaffolds, cells, growth factors, and biophysical modulation. In this review, we discuss recent advances in enthesis tissue engineering, particularly the use of biological scaffolds, as well as perspectives on the future directions in enthesis tissue engineering.

VEGFA-Enriched Exosomes from Tendon-Derived Stem Cells Facilitate Tenocyte Differentiation, Migration, and Transition to a Fibroblastic Phenotype

Tendon-derived stem cells (TDSCs) play a vital role in repair of rotator cuff tear injuries by secreting paracrine proteins that regulate resident cell functions. Secreted exosomes may play a role in tendon injury repair by mediating intercellular communication; however, the detailed mechanisms by which TDSC-derived exosomes affect tenocyte development remain unknown. Here, we examined the effects of exosomes isolated from conditioned medium of TDSCs on tenocyte differentiation, migration, and transition to a fibroblastic phenotype in vitro. Successful isolation of exosomes from TDSCs was confirmed by high expression levels of CD81, CD63, CD9, and TSG101. Treatment with TDSC-derived exosomes promoted the growth and migration of cultured rat tenocytes, and increased the levels of the fibrosis markers collagen I, collagen III, scleraxis, tenascin C, and α-smooth muscle actin. Furthermore, vascular endothelial growth factor A (VEGFA) expression was higher in TDSC-derived exosomes than in TDSCs, and genetic knockdown of VEGFA suppressed the stimulatory effect of TDSC-derived exosomes on tenocyte development. Overall, these results demonstrate that VEGFA-enriched exosomes isolated from TDSCs promote differentiation and migration of cultured tenocytes and their transition to a fibroblastic phenotype. These data provide a new potential clinical treatment strategy for tendon injury.

Mesenchymal Stem Cell Use in Acute Tendon Injury: In Vitro Tenogenic Potential vs. In Vivo Dose Response

Stem cell therapy for the treatment of tendon injury is an emerging clinical practice in the fields of human and veterinary sports medicine; however, the therapeutic benefit of intralesional transplantation of mesenchymal stem cells in tendonitis cases is not well designed. Questions persist regarding the overall tenogenic potential and efficacy of this treatment alone. In this study, we aimed to isolate a rat mesenchymal stem cell lineage for in vitro and in vivo use, to assess the effects of growth factor exposure in vitro on cell morphology, behavior, and tendon-associated glycoprotein production, and to assess the therapeutic potential of intralesional stem cells, as a function of dose, in vivo. First, rat adipose-derived (rAdMSC) and bone marrow-derived (rBMSC) stem cell lineages were isolated, characterized with flow cytometric analysis, and compared in terms of proliferation (MTS assay) and cellular viability (calcein AM staining). Rat AdMSCs displayed superior proliferation and more homogenous CD 73, CD 44H, and CD 90 expression as compared to rBMSC. Next, the tenogenic differentiation potential of the rAdMSC lineage was tested in vitro through isolated and combined stimulation with reported tenogenic growth factors, transforming growth factor (TGF)-β3 and connective tissue growth factor (CTGF). We found that the most effective tenogenic factor in terms of cellular morphologic change, cell alignment/orientation, sustained cellular viability, and tendon-associated glycoprotein upregulation was TGFβ3, and we confirmed that rAdMSC could be induced toward a tenogenic lineage in vitro. Finally, the therapeutic potential of rAdMSCs as a function of dose was assessed using a rat acute Achilles tendon injury model. Amounts of 5 × 10⁵ (low dose) and 4 × 10⁶ (high dose) were used. Subjectively, on the gross morphology, the rAdMSC-treated tendons exhibited fewer adhesions and less scar tissue than the control tendons; however, regardless of the rAdMSC dose, no significant differences in histological grade or tissue collagen I deposition were noted between the rAdMSC-treated and control tendons. Collectively, rAdMSCs exhibited appropriate stem cell markers and tenogenic potential in vitro, but the clinical efficacy of intralesional implantation of undifferentiated cells in acute tendonitis cases could not be proven. Further investigation into complementary therapeutics or specialized culture conditions prior to implantation are warranted.

Practical Considerations for Translating Mesenchymal Stromal Cell-Derived Extracellular Vesicles from Bench to Bed

Extracellular vesicles (EVs) derived from mesenchymal stromal cells (MSCs) have shown potential for the treatment of tendon and ligament injuries. This approach can eliminate the need to transplant live cells to the human body, thereby reducing issues related to the maintenance of cell viability and stability and potential erroneous differentiation of transplanted cells to bone or tumor. Despite these advantages, there are practical issues that need to be considered for successful clinical application of MSC-EV-based products in the treatment of tendon and ligament injuries. This review aims to discuss the general and tissue-specific considerations for manufacturing MSC-EVs for clinical translation. Specifically, we will discuss Good Manufacturing Practice (GMP)-compliant manufacturing and quality control (parent cell source, culture conditions, concentration method, quantity, identity, purity and impurities, sterility, potency, reproducibility, storage and formulation), as well as safety and efficacy issues. Special considerations for applying MSC-EVs, such as their compatibility with arthroscopy for the treatment of tendon and ligament injuries, are also highlighted.

Mesenchymal Stem Cell Delivery via Topographically Tenoinductive Collagen Biotextile Enhances Regeneration of Segmental Tendon Defects

BACKGROUND

Successful management of massive rotator cuff (RC) tendon tears represents a treatment challenge because of the limited intrinsic healing capacity of native tendons and the risk of repair failure. Biologic augmentation of massive RC tears utilizing scaffolds-capable of regenerating bulk tendon tissue to achieve a mechanically functional repair-represents an area of increasing clinical interest.

PURPOSE

To investigate the histological and biomechanical outcomes after the use of a novel biologic scaffold fabricated from woven electrochemically aligned collagen (ELAC) threads as a suture-holding, fully load-bearing, defect-bridging scaffold with or without mesenchymal stem cells (MSCs) compared with direct repair in the treatment of critically sized RC defects using a rabbit model.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 34 New Zealand White rabbits underwent iatrogenic creation of a critically sized defect (6 mm) in the infraspinatus tendon of 1 shoulder, with the contralateral shoulder utilized as an intact control. Specimens were divided into 4 groups: (1) gap-negative control without repair; (2) direct repair of the infraspinatus tendon-operative control; (3) tendon repair using ELAC; and (4) tendon repair using ELAC + MSCs. Repair outcomes were assessed at 6 months using micro-computed tomography, biomechanical testing, histology, and immunohistochemistry.

RESULTS

Specimens treated with ELAC demonstrated significantly less tendon retraction when compared with the direct repair group specimens (P = .014). ELAC + MSCs possessed comparable biomechanical strength (178 ± 50 N) to intact control shoulders (199 ± 35 N) (P = .554). Histological analyses demonstrated abundant, well-aligned de novo collagen around ELAC threads in both the ELAC and the ELAC + MSC shoulders, with ELAC + MSC specimens demonstrating increased ELAC resorption (7% vs 37%, respectively; P = .002). The presence of extracellular matrix components, collagen type I, and tenomodulin, indicating tendon-like tissue formation, was appreciated in both the ELAC and the ELAC + MSC groups.

CONCLUSION

The application of MSCs to ELAC scaffolds improved biomechanical and histological outcomes when compared with direct repair for the treatment of critically sized defects of the RC in a rabbit model.

CLINICAL RELEVANCE

This study demonstrates the feasibility of repairing segmental tendon defects with a load-bearing, collagen biotextile in an animal model, showing the potential applicability of RC repair supplementation using allogeneic stem cells.

Global Research Trends in Tendon Stem Cells from 1991 to 2020: A Bibliometric and Visualized Study

Background

Tendinopathy is a disabling musculoskeletal disorder affecting the athletics and general populations. There have been increased studies using stem cells in treating tendon diseases. The aim of this bibliometric and visualized study is to comprehensively investigate the current status and global trends of research in tendon stem cells.

Methods

Publications related to tendon stem cells from 1991 to 2020 were retrieved from Web of Science and then indexed using a bibliometric methodology. VOSviewer software was used to conduct the visualized study, including coauthorship, cocitation, and cooccurrence analysis and to analyze the publication trends of research in tendon stem cells.

Results

In total, 2492 articles were included and the number of publications increased annually worldwide. The United States made the largest contribution to this field, with the most publications (938 papers, 37.64%), citation frequency (68,195 times), and the highest H-index (103). The most contributive institutions were University of Pittsburgh (96 papers), Zhejiang University (70 papers), Shanghai Jiao Tong University, and Chinese University of Hong Kong (both 64 papers). The Journal of Orthopaedic Research published the most relative articles. Studies could be classified into five clusters: “Animal study,” “Tissue engineering,” “Clinical study,” “Mechanism research,” and “Stem cells research”, which show a balanced development trend.

Conclusion

Publications on tendon stem cells may reached a platform based on current global trends. According to the inherent changes of hotspots in each cluster and the possibilities of cross-research, the research in tendon stem cells may exist a balanced development trend.

Insulin-Functionalized Bioactive Fiber Matrices with Bone Marrow-Derived Stem Cells in Rat Achilles Tendon Regeneration

Approximately half of annual musculoskeletal injuries in the US involve tendon tears. The naturally hypocellular and hypovascular tendon environment makes tendons injury-prone and heal slowly. Tendon tissue engineering strategies often use biomimetic scaffolds combined with bioactive factors and/or cells to enhance healing. FDA-approved growth factors to promote tendon healing are lacking, which highlights the need for safe and effective bioactive factors. Our previous work evaluated insulin as a bioactive factor and identified an optimal dose to promote in vitro mesenchymal stem cell survival, division, and tenogenesis. The present work evaluates the ability of insulin-functionalized electrospun nanofiber matrices with or without mesenchymal stem cells to enhance tendon repair in a rat Achilles injury model. Electrospun nanofiber matrices were functionalized with insulin, cultured with or without mesenchymal stem cells, and sutured to transected Achilles tendons in rats. We analyzed rat tendons 4 and 8 weeks after surgery for the tendon morphology, collagen production, and mechanical properties. Bioactive insulin-functionalized fiber matrices with mesenchymal stem cells resulted in significantly increased collagen I and III at 4 and 8 weeks postsurgery. Additionally, these matrices supported highly aligned collagen fibrils in the regenerated tendon tissue at 8 weeks. However, treatment- and control-regenerated tissues had similar tensile properties at 8 weeks, which were less than that of the native Achilles tendon. Our preliminary results establish the benefits of insulin-functionalized fiber matrices in promoting higher levels of collagen synthesis and alignment needed for functional recovery of tendon repair.

The effects of orthobiologics in the treatment of tendon pathologies: a systematic review of preclinical evidence

Purpose

The aim of this systematic review is to explore the current available knowledge about tendon disorders and orthobiologics derived by preclinical experiments to evaluate their role and efficacy in the different stages and conditions related to the tendon healing processes.

Methods

The systematic review was performed according to the PRISMA guidelines. Different electronic databases (MEDLINE, Web of Science, EMBASE) were searched for studies investigating orthobiologics (PRP and cell-based products from adipose tissue or bone marrow) in animal models or veterinary clinical trials for tendon pathologies (complete/partial tendon ruptures, rotator cuff tears, tendinopathy, enthesis-related injuries). Data regarding the specific product used, the treatment site/pathology, the host and the model were collected. The results were classified into the following categories: histological, biomechanical, molecular and imaging.

Results

A large pool of preclinical studies on tendon disorders have been found on platelet-rich plasma (PRP), while data about stromal vascular fraction (SVF) and bone marrow concentrate (BMAC) are still limited and frequently focused on expanded cells, rather than orthobiologics prepared at the point of care.

The effect of PRP is related to an acceleration of the healing process, without improvements in the final structure and properties of repaired tendon. Cell-based products have been reported to produce more durable results, but the level of evidence is currently insufficient to draw clear indications.

Conclusions

The preclinical results about orthobiologics applications to tendon pathologies would support the rationale of their clinical use and encourage the performance of clinical trials aimed to confirm these data in human subjects.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40634-022-00468-w.

Mechanical Properties of Animal Tendons: A Review and Comparative Study for the Identification of the Most Suitable Human Tendon Surrogates

The mechanical response of a tendon to load is strictly related to its complex and highly organized hierarchical structure, which ranges from the nano- to macroscale. In a broader context, the mechanical properties of tendons during tensile tests are affected by several distinct factors, due in part to tendon nature (anatomical site, age, training, injury, etc.) but also depending on the experimental setup and settings. This work aimed to present a systematic review of the mechanical properties of tendons reported in the scientific literature by considering different anatomical regions in humans and several animal species (horse, cow, swine, sheep, rabbit, dog, rat, mouse, and foal). This study was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. The literature research was conducted via Google Scholar, PubMed, PicoPolito (Politecnico di Torino’s online catalogue), and Science Direct. Sixty studies were selected and analyzed. The structural and mechanical properties described in different animal species were reported and summarized in tables. Only the results from studies reporting the strain rate parameter were considered for the comparison with human tendons, as they were deemed more reliable. Our findings showed similarities between animal and human tendons that should be considered in biomechanical evaluation. An additional analysis of the effects of different strain rates showed the influence of this parameter.

Stem cells in tendon regeneration and factors governing tenogenesis

Tendons are connective tissue structures of paramount importance to the human ability of locomotion. Tendinopathy and tendon rupture can be resistant to treatment and often recurs, thus resulting in a significant health problem with a relevant social impact worldwide. Unfortunately, existing treatment approaches are suboptimal. A better understanding of the basic biology of tendons may provide a better way to solve these problems and promote tendon regeneration. Stem cells, either obtained from tendons or non-tendon sources, such as bone marrow (BMSCs), adipose tissue (AMSCs), as well as embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs), have received increasing attention toward enhancing tendon healing. There are many studies showing that stem cells can contribute to improving tendon healing. Hence, in this review, the current knowledge of BMSCs, AMSCs, TSPCs, ESCs and iPSCs for tendon regeneration, as well as the advantages and limitations among them, has been highlighted. Moreover, the transcriptional and bioactive factors governing tendon healing processes have been discussed.

Mesenchymal Stem Cells From a Hypoxic Culture Can Improve Rotator Cuff Tear Repair

A rotator cuff tear is an age-related common cause of pain and disability. Studies including our previously published ones have demonstrated that mesenchymal stem cells cultured under hypoxic conditions [hypoxic multipotent stromal cells (MSCs)] facilitate the retention of transplanted cells and promote wound healing. However, there are very few, if any, reports targeting the punctured supraspinatus tendons to create more or equally serous wounds as age-related tears of rotator cuff. It remains to be determined whether transplantation of bone-marrow-derived hypoxic MSCs into the punctured supraspinatus tendon improves tendon repair and, when combined with ultrasound-guided delivery, could be used for future clinical applications. In this study, we used a total of 33 Sprague-Dawley rats in different groups for normal no-punched control, hypoxic MSC treatment, nontreated vehicle control, and MSC preparation, and then evaluated treatment outcomes by biomechanical testing and histological analysis. We found that the ultimate failure load of the hypoxic MSC-treated group was close to that of the normal tendon and significantly greater than that of the nontreated vehicle control group. In vivo tracking of cells labeled with superparamagnetic iron oxide (SPIO) nanoparticles revealed an enhanced retention of transplanted cells at the tear site. Our study demonstrates that hypoxic MSCs improve rotator cuff tear repair in a rat model.

Tendon Tissue Repair in Prospective of Drug Delivery, Regenerative Medicines, and Innovative Bioscaffolds

The natural healing capacity of the tendon tissue is limited due to the hypovascular and cellular nature of this tissue. So far, several conventional approaches have been tested for tendon repair to accelerate the healing process, but all these approaches have their own advantages and limitations. Regenerative medicine and tissue engineering are interdisciplinary fields that aspire to develop novel medical devices, innovative bioscaffold, and nanomedicine, by combining different cell sources, biodegradable materials, immune modulators, and nanoparticles for tendon tissue repair. Different studies supported the idea that bioscaffolds can provide an alternative for tendon augmentation with an enormous therapeutic potentiality. However, available data are lacking to allow definitive conclusion on the use of bioscaffolds for tendon regeneration and repairing. In this review, we provide an overview of the current basic understanding and material science in the field of bioscaffolds, nanomedicine, and tissue engineering for tendon repair.

Autologous bone marrow-derived mesenchymal stem cells provide complete regeneration in a rabbit model of the Achilles tendon bundle rupture

PURPOSE

To ascertain the role of autologous bone marrow-derived mesenchymal stem cells (BM-MSCs) in the tendon regeneration.

METHODS

The study was conducted on 58 Achilles tendons from 29 laboratory Chinchilla adult rabbits. The central bundles of 48 tendons were partially removed and substituted with a tissue-engineered construct consisting of a collagen sponge either loaded with BM-MSCs (n = 24) or cell free (n = 24), placed inside a Vicryl mesh tube. The ends of the resected tendon were inserted in the construct to reach a direct contact with the sponge and sutured to the tube. The animals were sacrificed three and six months post-surgery. Ten intact tendons from five rabbits were used as an untreated control. The tissue samples (n = 30) were stained with haematoxylin and eosin, Picrosirius red, primary antibodies to collagen types I and III and studied by bright-field, phase-contrast, polarized light, and scanning electron microscopies followed by semi-quantitative morphometry.

RESULTS

Six months results of cell-loaded scaffolds demonstrated parallel collagen fibres, spindle-shaped tenocytes, and neoangiogenesis. In the control cell-free group, the injured areas were filled with a nonspecific fibrotic tissue with minor foci of incomplete regeneration. The biomechanical tests of 28 tendons taken from 14 rabbits showed that the stiffness of the cell-based reconstructed tendons increased to 98% of the value for the intact samples.

CONCLUSION

The obtained results support the hypothesis that the application of BM-MSCs in a tissue-engineered tendon construct leads to the restitution of the tendon tissue.

Microscopic characterisation of local strain field in healing tissue in the central third defect of mouse patellar tendon at early-phase of healing

Tendons exhibit a hierarchical collagen structure, wherein higher-level components, such as collagen fibres and fascicles, are elongated, slid, and rotated during macroscopic stretching. These mechanical behaviours of collagen fibres play important roles in stimulating tenocytes, imposing stretching, compression, and shear deformation. It was hypothesised that a lack of local fibre behaviours in healing tendon tissue may result in a limited application of mechanical stimuli to cells within the tissue, leading to incomplete recovery of tissue structure and functions in regenerated tendons. Therefore, the present study aimed to measure the microscopic strain field in the healing tendon tissue. A central third defect was created in the patellar tendon of mice, and the regenerated tissue in the defect was examined by tensile testing, collagen fibre analysis, and local strain measurement using confocal microscopy at 3 and 6 weeks after surgery. Healing tissue at 3 weeks exhibited a significantly lower strength and disorganised collagen fibre structure compared with the normal tendon. These characteristics at 6 weeks remained significantly different from those of the normal tendon. Moreover, the magnitude of local shear strain in the healing tissue under 4% tissue strain was significantly smaller than that in the normal tendon. Differences in the local strain field may be reflected in the cell nuclear shape and possibly the amount of mechanical stimuli applied to the cells during tendon deformation. Accordingly, restoration of a normal local mechanical environment in the healing tissue may be key to a better healing outcome of tendon injury.

Current Biological Strategies to Enhance Surgical Treatment for Rotator Cuff Repair

Rotator cuff tear is one of the most common shoulder problems encountered by orthopedic surgeons. Due to the slow healing process and high retear rate, rotator cuff tear has distressed millions of people all around the world every year, especially for the elderly and active athletes. This disease significantly impairs patients' motor ability and reduces their quality of life. Besides conservative treatment, open and arthroscopic surgery contributes a lot to accelerate the healing process of rotator cuff tear. Currently, there are many emerging novel treatment methods to promote rotator cuff repair. A variety of biological stimulus has been utilized in clinical practice. Among them, platelet-rich plasma, growth factors, stem cells, and exosomes are the most popular biologics in laboratory research and clinical trials. This review will focus on the biologics of bioaugmentation methods for rotator cuff repair and tendon healing, including platelet-rich plasma, growth factors, exosomes and stem cells, etc. Relevant studies are summarized in this review and future research perspectives are introduced.

Tuning the Mechanical and Geometric Properties of Electrochemically Aligned Collagen Threads Toward Applications in Biohybrid Robotics

Electrochemically aligned collagen (ELAC) threads fabricated by the isoelectric focusing (IF) of collagen have previously shown potential in tissue engineering and more recently in the fabrication of biohybrid robot structures. For applications in biohybrid robotics, ELAC structures are needed that are both robust and compliant enough to facilitate muscle actuation. However, studies on the effects of IF parameters, and the interactions of such fabrication parameters, on the mechanical and geometric properties of resulting ELAC threads have not been previously found in literature. Understanding the impact of these manufacturing parameters on the material properties is critical to facilitate biohybrid robot design. In this study, the effects of IF duration, IF voltage, and collagen solution concentration were investigated and showed statistically significant effects on adjusting ELAC properties via single-factor experiments. The interactions between parameters exhibited significant joint effects on ELAC property tuning through two-factor experiments. Scanning electron microscopy and 2,4,6-trinitrobenzenesulfonic (TNBS) assays revealed the correlation between high mechanical properties and a combination of low porosity and high degree of crosslinking. By simply tuning IF parameters without changing other fabrication steps, such as crosslinker concentration, ELAC threads with a wide range of mechanical and geometric properties were fabricated. The average tensile modulus of the resulting ELAC threads ranged from 198 ± 90 to 758 ± 138 MPa. The average cross-sectional area ranged from 7756 ± 1000 to 1775 ± 457 μm2. The resultant mapping between IF parameters and ELAC thread properties enabled the production of strong and flexible threads with customizable properties.

Industrial Development of Standardized Fetal Progenitor Cell Therapy for Tendon Regenerative Medicine: Preliminary Safety in Xenogeneic Transplantation

Tendon defects require multimodal therapeutic management over extensive periods and incur high collateral burden with frequent functional losses. Specific cell therapies have recently been developed in parallel to surgical techniques for managing acute and degenerative tendon tissue affections, to optimally stimulate resurgence of structure and function. Cultured primary human fetal progenitor tenocytes (hFPT) have been preliminarily considered for allogeneic homologous cell therapies, and have been characterized as stable, consistent, and sustainable cell sources in vitro. Herein, optimized therapeutic cell sourcing from a single organ donation, industrial transposition of multi-tiered progenitor cell banking, and preliminary preclinical safety of an established hFPT cell source (i.e., FE002-Ten cell type) were investigated. Results underlined high robustness of FE002-Ten hFPTs and suitability for sustainable manufacturing upscaling within optimized biobanking workflows. Absence of toxicity or tumorigenicity of hFPTs was demonstrated in ovo and in vitro, respectively. Furthermore, a 6-week pilot good laboratory practice (GLP) safety study using a rabbit patellar tendon partial-thickness defect model preliminarily confirmed preclinical safety of hFPT-based standardized transplants, wherein no immune reactions, product rejection, or tumour formation were observed. Such results strengthen the rationale of the multimodal Swiss fetal progenitor cell transplantation program and prompt further investigation around such cell sources in preclinical and clinical settings for musculoskeletal regenerative medicine.

Tendon tissue engineering: Cells, growth factors, scaffolds and production techniques

Tendon injuries are a global health problem that affects millions of people annually. The properties of tendons make their natural rehabilitation a very complex and long-lasting process. Thanks to the development of the fields of biomaterials, bioengineering and cell biology, a new discipline has emerged, tissue engineering. Within this discipline, diverse approaches have been proposed. The obtained results turn out to be promising, as increasingly more complex and natural tendon-like structures are obtained. In this review, the nature of the tendon and the conventional treatments that have been applied so far are underlined. Then, a comparison between the different tendon tissue engineering approaches that have been proposed to date is made, focusing on each of the elements necessary to obtain the structures that allow adequate regeneration of the tendon: growth factors, cells, scaffolds and techniques for scaffold development. The analysis of all these aspects allows understanding, in a global way, the effect that each element used in the regeneration of the tendon has and, thus, clarify the possible future approaches by making new combinations of materials, designs, cells and bioactive molecules to achieve a personalized regeneration of a functional tendon.

Challenges in Bone Tissue Regeneration: Stem Cell Therapy, Biofunctionality and Antimicrobial Properties of Novel Materials and Its Evolution

An aging population leads to increasing demand for sustained quality of life with the aid of novel implants. Patients expect fast healing and few complications after surgery. Increased biofunctionality and antimicrobial behavior of implants, in combination with supportive stem cell therapy, can meet these expectations. Recent research in the field of bone implants and the implementation of autologous mesenchymal stem cells in the treatment of bone defects is outlined and evaluated in this review. The article highlights several advantages, limitations and advances for metal-, ceramic- and polymer-based implants and discusses the future need for high-throughput screening systems used in the evaluation of novel developed materials and stem cell therapies. Automated cell culture systems, microarray assays or microfluidic devices are required to efficiently analyze the increasing number of new materials and stem cell-assisted therapies. Approaches described in the literature to improve biocompatibility, biofunctionality and stem cell differentiation efficiencies of implants range from the design of drug-laden nanoparticles to chemical modification and the selection of materials that mimic the natural tissue. Combining suitable implants with mesenchymal stem cell treatment promises to shorten healing time and increase treatment success. Most research studies focus on creating antibacterial materials or modifying implants with antibacterial coatings in order to address the increasing number of complications after surgeries that are mostly caused by bacterial infections. Moreover, treatment of multiresistant pathogens will pose even bigger challenges in hospitals in the future, according to the World Health Organization (WHO). These antibacterial materials will help to reduce infections after surgery and the number of antibiotic treatments that contribute to the emergence of new multiresistant pathogens, whilst the antibacterial implants will help reduce the amount of antibiotics used in clinical treatment.

Dielectrophoresis as a tool for electrophysiological characterization of stem cells

Dielectrophoresis (DEP), a nonlinear electrokinetic technique caused by Maxwell-Wagner interfacial polarization of neutral particles in an electrolyte solution, is a powerful cell manipulation method used widely for various applications such as enrichment, trapping, and sorting of heterogeneous cell populations. While conventional cell characterization and sorting methods require tagging or labeling of cells, DEP has the potential to manipulate cells in a label-free way. Due to its unique ability to characterize and sort cells without the need of labeling, there is renewed interest in using DEP for stem cell research and regenerative medicine. Stem cells have the potential to differentiate into various lineages, but achieving homogeneous cell phenotypes from an initially heterogeneous cell population is a challenge. Using DEP to efficiently and affordably identify, sort, and enrich either undifferentiated or differentiated stem cell populations in a label-free way would advance their potential uses for applications in tissue engineering and regenerative medicine. This review summarizes recent, significant research findings regarding the electrophysiological characterization of stem cells, with a focus on cellular dielectric properties, i.e., permittivity and conductivity, and on studies that have obtained these measurements using techniques that preserve cell viability, such as crossover frequency. Potential applications for DEP in regenerative medicine are also discussed. Overall, DEP is a promising technique and, when used to characterize, sort, and enrich stem cells, will advance stem cell-based regenerative therapies.

Regeneration of a full-thickness defect in rotator cuff tendon with umbilical cord-derived mesenchymal stem cells in a rat model

Although rotator cuff disease is a common cause of shoulder pain, there is still no treatment method that could halt or reveres its development and progression. The purpose of this study was to investigate the efficacy of umbilical cord-derived mesenchymal stem cells (UC MSCs) on the regeneration of a full-thickness rotator cuff defect (FTD) in a rat model. We injected either UC MSCs or saline to the FTD and investigated macroscopic, histological and biomechanical results and cell trafficking. Treatment with UC MSCs improved macroscopic appearance in terms of tendon thickness at two weeks, and inflammation, defect size, swelling/redness and connection surrounding tissue and slidability at four weeks compared to the saline group. Histologically, UC MSCs induced the tendon matrix formation recovering collagen organization, nuclear aspect ratio and orientation angle of fibroblast as well as suppressing cartilage-related glycosaminoglycan compared to saline group at four weeks. The UC MSCs group also improved ultimate failure load by 25.0% and 19.0% and ultimate stress by 27.3% and 26.8% at two and four weeks compared to saline group. UC MSCs labeled with PKH26 exhibited 5.3% survival at four weeks compared to three hours after injection. This study demonstrated that UC MSCs regenerated the FTD with tendon tissue similar properties to the normal tendon in terms of macroscopic, histological and biomechanical characteristics in a rat model.

A brief history of tendon and ligament bioreactors: Impact and future prospects

Bioreactors are powerful tools with the potential to model tissue development and disease in vitro. For nearly four decades, bioreactors have been used to create tendon and ligament tissue-engineered constructs in order to define basic mechanisms of cell function, extracellular matrix deposition, tissue organization, injury, and tissue remodeling. This review provides a historical perspective of tendon and ligament bioreactors and their contributions to this advancing field. First, we demonstrate the need for bioreactors to improve understanding of tendon and ligament function and dysfunction. Next, we detail the history and evolution of bioreactor development and design from simple stretching of explants to fabrication and stimulation of two- and three-dimensional constructs. Then, we demonstrate how research using tendon and ligament bioreactors has led to pivotal basic science and tissue-engineering discoveries. Finally, we provide guidance for new basic, applied, and clinical research utilizing these valuable systems, recognizing that fundamental knowledge of cell-cell and cell-matrix interactions combined with appropriate mechanical and chemical stimulation of constructs could ultimately lead to functional tendon and ligament repairs in the coming decades.

Holistic Approach of Swiss Fetal Progenitor Cell Banking: Optimizing Safe and Sustainable Substrates for Regenerative Medicine and Biotechnology

Safety, quality, and regulatory-driven iterative optimization of therapeutic cell source selection has constituted the core developmental bedrock for primary fetal progenitor cell (FPC) therapy in Switzerland throughout three decades. Customized Fetal Transplantation Programs were pragmatically devised as straightforward workflows for tissue procurement, traceability maximization, safety, consistency, and robustness of cultured progeny cellular materials. Whole-cell bioprocessing standardization has provided plethoric insights into the adequate conjugation of modern biotechnological advances with current restraining legislative, ethical, and regulatory frameworks. Pioneer translational advances in cutaneous and musculoskeletal regenerative medicine continuously demonstrate the therapeutic potential of FPCs. Extensive technical and clinical hindsight was gathered by managing pediatric burns and geriatric ulcers in Switzerland. Concomitant industrial transposition of dermal FPC banking, following good manufacturing practices, demonstrated the extensive potential of their therapeutic value. Furthermore, in extenso, exponential revalorization of Swiss FPC technology may be achieved via the renewal of integrative model frameworks. Consideration of both longitudinal and transversal aspects of simultaneous fetal tissue differential processing allows for a better understanding of the quasi-infinite expansion potential within multi-tiered primary FPC banking. Multiple fetal tissues (e.g., skin, cartilage, tendon, muscle, bone, lung) may be simultaneously harvested and processed for adherent cell cultures, establishing a unique model for sustainable therapeutic cellular material supply chains. Here, we integrated fundamental, preclinical, clinical, and industrial developments embodying the scientific advances supported by Swiss FPC banking and we focused on advances made to date for FPCs that may be derived from a single organ donation. A renewed model of single organ donation bioprocessing is proposed, achieving sustained standards and potential production of billions of affordable and efficient therapeutic doses. Thereby, the aim is to validate the core therapeutic value proposition, to increase awareness and use of standardized protocols for translational regenerative medicine, potentially impacting millions of patients suffering from cutaneous and musculoskeletal diseases. Alternative applications of FPC banking include biopharmaceutical therapeutic product manufacturing, thereby indirectly and synergistically enhancing the power of modern therapeutic armamentariums. It is hypothesized that a single qualifying fetal organ donation is sufficient to sustain decades of scientific, medical, and industrial developments, as technological optimization and standardization enable high efficiency.

Electrospun PLGA Fiber Diameter and Alignment of Tendon Biomimetic Fleece Potentiate Tenogenic Differentiation and Immunomodulatory Function of Amniotic Epithelial Stem Cells

Injured tendons are challenging in their regeneration; thus, tissue engineering represents a promising solution. This research tests the hypothesis that the response of amniotic epithelial stem cells (AECs) can be modulated by fiber diameter size of tendon biomimetic fleeces. Particularly, the effect of electrospun poly(lactide-co-glycolide) (PLGA) fleeces with highly aligned microfibers possessing two different diameter sizes (1.27 and 2.5 µm: ha1- and ha2-PLGA, respectively) was tested on the ability of AECs to differentiate towards the tenogenic lineage by analyzing tendon related markers (Collagen type I: COL1 protein and mRNA Scleraxis: SCX, Tenomodulin: TNMD and COL1 gene expressions) and to modulate their immunomodulatory properties by investigating the pro- (IL-6 and IL-12) and anti- (IL-4 and IL-10) inflammatory cytokines. It was observed that fiber alignment and not fiber size influenced cell morphology determining the morphological change of AECs from cuboidal to fusiform tenocyte-like shape. Instead, fleece mechanical properties, cell proliferation, tenogenic differentiation, and immunomodulation were regulated by changing the ha-PLGA microfiber diameter size. Specifically, higher DNA quantity and better penetration within the fleece were found on ha2-PLGA, while ha1-PLGA fleeces with small fiber diameter size had better mechanical features and were more effective on AECs trans-differentiation towards the tenogenic lineage by significantly translating more efficiently SCX into the downstream effector TNMD. Moreover, the fiber diameter of 1.27 µm induced higher expression of pro-regenerative, anti-inflammatory interleukins mRNA expression (IL-4 and IL-10) with favorable IL-12/IL-10 ratio with respect to the fiber diameter of 2.5 µm. The obtained results demonstrate that fiber diameter is a key factor to be considered when designing tendon biomimetic fleece for tissue repair and provide new insights into the importance of controlling matrix parameters in enhancing cell differentiation and immunomodulation either for the cells functionalized within or for the transplanted host tissue.

Optimization of tenocyte lineage-related factors from tonsil-derived mesenchymal stem cells using response surface methodology

BACKGROUND

In order to optimize the tenogenic differentiation of mesenchymal stem cells (MSCs), researchers should consider various factors. However, this requires testing numerous experimental settings, which is costly and time-consuming. We aimed to assess the differential effects of transforming growth factor beta-3 (TGF-β3) on the tenogenesis of tonsil-derived MSCs (T-MSCs) and bone marrow-derived MSCs (BM-MSCs) using response surface methodology (RSM).

METHODS

Bone marrow and tonsillar tissue were collected from four patients; mononuclear cells were separated and treated with 5 or 10 ng/mL of TGF-β3. A full factorial experimental design with a categorical factor of 0 was employed to study the effect of tension based on T-MSCs. Eighty-four trials were fitted with RSM and then used to obtain mathematical prediction models.

RESULTS

Exposure of T-MSCs and BM-MSCs to TGF-β3 increased the expression of scleraxis (SCX), tenomodulin (TNMD), decorin, collagen I, and tenascin C. Expression of most of these factors reached a maximum after 2-3 days of treatment. The model predicted that the values of the tenocyte lineage-related factors assessed would be significantly increased at 2.5 days of culture with 2.7 ng/mL of TGF-β3 for T-MSCs and at 2.3 days of culture regardless of TGF-β3 concentration for BM-MSCs.

CONCLUSIONS

This study demonstrated that the RSM prediction of the culture time necessary for the tenogenic differentiation of T-MSCs and BM-MSCs under TGF-β3 stimulation was similar to the experimentally determined time of peak expression of tenocyte-related mRNAs, suggesting the potential of using the RSM approach for optimization of the culture protocol for tenogenesis of MSCs.

American Society for Bone and Mineral Research-Orthopaedic Research Society Joint Task Force Report on Cell-Based Therapies - Secondary Publication

Cell-based therapies, defined here as the delivery of cells in vivo to treat disease, have recently gained increasing public attention as a potentially promising approach to restore structure and function to musculoskeletal tissues. Although cell-based therapy has the potential to improve the treatment of disorders of the musculoskeletal system, there is also the possibility of misuse and misrepresentation of the efficacy of such treatments. The medical literature contains anecdotal reports and research studies, along with web-based marketing and patient testimonials supporting cell-based therapy. Both the American Society for Bone and Mineral Research (ASBMR) and the Orthopaedic Research Society (ORS) are committed to ensuring that the potential of cell-based therapies is realized through rigorous, reproducible, and clinically meaningful scientific discovery. The two organizations convened a multidisciplinary and international Task Force composed of physicians, surgeons, and scientists who are recognized experts in the development and use of cell-based therapies. The Task Force was charged with defining the state-of-the art in cell-based therapies and identifying the gaps in knowledge and methodologies that should guide the research agenda. The efforts of this Task Force are designed to provide researchers and clinicians with a better understanding of the current state of the science and research needed to advance the study and use of cell-based therapies for skeletal tissues. The design and implementation of rigorous, thorough protocols will be critical to leveraging these innovative treatments and optimizing clinical and functional patient outcomes. In addition to providing specific recommendations and ethical considerations for preclinical and clinical investigations, this report concludes with an outline to address knowledge gaps in how to determine the cell autonomous and nonautonomous effects of a donor population used for bone regeneration. © 2020 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:485-502, 2020.

From the perspective of embryonic tendon development: various cells applied to tendon tissue engineering

There is a high risk of injury from damage to the force-bearing tissue of the tendon. Due to its poor self-healing ability, clinical interventions for tendon injuries are limited and yield unsatisfying results. Tissue engineering might supply an alternative to this obstacle. As one of the key elements of tissue engineering, various cell sources have been used for tendon engineering, but there is no consensue concerning a single optimal source. In this review, we summarized the development of tendon tissue from the embryonic stage and categorized the used cell sources in tendon engineering. By comparing various cell sources as the candidates for tendon regeneration, each cell type was found to have its advantages and limitations; therefore, it is difficult to define the best cell source for tendon engineering. The microenvironment cells located is also crucial for cell growth and differentiation; so, the optimal cells are unlikely to be the same for each patient. In the future, the clinical application of tendon engineering might be more precise and customized in contrast to the current use of a standardized/generic one-size-fits-all procedure. The best cell source for tendon engineering will require a case-based assessment.

Rotator Cuff Repair With Autologous Tenocytes and Biodegradable Collagen Scaffold: A Histological and Biomechanical Study in Sheep

BACKGROUND

Large rotator cuff tears still represent a challenging problem in orthopaedics. The use of tenocytes on biomaterials/scaffolds for the repair of large rotator cuff defects might be a promising approach in the field of tendon regeneration.

HYPOTHESIS

Cultivated autologous tenocytes seeded on a collagen scaffold lead to enhanced histological and biomechanical results after rotator cuff repair in a sheep model as compared with unseeded scaffolds in an acute setting.

STUDY DESIGN

Controlled laboratory study.

METHODS

At the tendon-bone junction of the infraspinatus tendon of the right foreleg of 24 sheep, a 3.5 × 1.5-cm tendon defect was created. Sheep were randomly allocated to group 1, a defect; group 2, where an unseeded collagen scaffold was implanted; or group 3, which received the implantation of a collagen scaffold seeded with autologous tenocytes. Twelve weeks postoperatively, tendon regeneration was examined histologically and biomechanically.

RESULTS

The histology of the neotendons of group 3 showed better fiber patterns, a higher production of proteoglycans, and an increased genesis of collagen III in contrast to groups 1 and 2. Immunostaining revealed less tissue dedifferentiation, a more structured cartilage layer, and homogeneous cartilage-bone transition in group 3 in comparison with groups 1 and 2. Biomechanically, the tensile strength of the reconstructed tendons in group 3 (mean load to failure, 2516 N; SD, 407.5 N) was approximately 84% that of the native tendons (mean load to failure, 2995 N; SD, 223.1 N) without statistical significance. A significant difference (P = .0095) was registered between group 1 (66.9% with a mean load to failure of 2004 N; SD, 273.8 N) and the native tendons, as well as between group 2 (69.7% with a mean load to failure of 2088 N; SD, 675.4 N) and the native tendons for mean ultimate tensile strength. In breaking stress, a significant difference (P = .0095) was seen between group 1 (mean breaking stress, 1335 N/mm²; SD, 182.7 N/mm²) and the native tendons, as well as between group 2 (breaking stress, 1392 N/mm²; SD, 450.2 N/mm²) and the native tendons (mean breaking stress, 1996 N/mm²; SD, 148.7 N/mm²). Again, there was no significant difference between group 3 (mean breaking stress, 1677 N/mm²; SD, 271.7 N/mm²) and the native tendons.

CONCLUSION

Autologous tenocytes seeded on collagen scaffolds yield enhanced biomechanical results after tendon-bone reconstruction as compared with unseeded scaffolds in an acute setting. Biomechanical results and histological outcomes were promising, showing that the use of autologous tenocytes with specific carrier matrices could be a novel approach for repairing rotator cuff tears.

CLINICAL RELEVANCE

This study supports the use of tenocytes and scaffolds for improving the quality of tendon-bone regeneration.

Tendon and Ligament Healing and Current Approaches to Tendon and Ligament Regeneration

Ligament and tendon injuries are common problems in orthopedics. There is a need for treatments that can expedite nonoperative healing or improve the efficacy of surgical repair or reconstruction of ligaments and tendons. Successful biologically-based attempts at repair and reconstruction would require a thorough understanding of normal tendon and ligament healing. The inflammatory, proliferative, and remodeling phases, and the cells involved in tendon and ligament healing will be reviewed. Then, current research efforts focusing on biologically-based treatments of ligament and tendon injuries will be summarized, with a focus on stem cells endogenous to tendons and ligaments. Statement of clinical significance: This paper details mechanisms of ligament and tendon healing, as well as attempts to apply stem cells to ligament and tendon healing. Understanding of these topics could lead to more efficacious therapies to treat ligament and tendon injuries. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:7-12, 2020.

American Society for Bone and Mineral Research-Orthopaedic Research Society Joint Task Force Report on Cell-Based Therapies

Cell-based therapies, defined here as the delivery of cells in vivo to treat disease, have recently gained increasing public attention as a potentially promising approach to restore structure and function to musculoskeletal tissues. Although cell-based therapy has the potential to improve the treatment of disorders of the musculoskeletal system, there is also the possibility of misuse and misrepresentation of the efficacy of such treatments. The medical literature contains anecdotal reports and research studies, along with web-based marketing and patient testimonials supporting cell-based therapy. Both the American Society for Bone and Mineral Research (ASBMR) and the Orthopaedic Research Society (ORS) are committed to ensuring that the potential of cell-based therapies is realized through rigorous, reproducible, and clinically meaningful scientific discovery. The two organizations convened a multidisciplinary and international Task Force composed of physicians, surgeons, and scientists who are recognized experts in the development and use of cell-based therapies. The Task Force was charged with defining the state-of-the art in cell-based therapies and identifying the gaps in knowledge and methodologies that should guide the research agenda. The efforts of this Task Force are designed to provide researchers and clinicians with a better understanding of the current state of the science and research needed to advance the study and use of cell-based therapies for skeletal tissues. The design and implementation of rigorous, thorough protocols will be critical to leveraging these innovative treatments and optimizing clinical and functional patient outcomes. In addition to providing specific recommendations and ethical considerations for preclinical and clinical investigations, this report concludes with an outline to address knowledge gaps in how to determine the cell autonomous and nonautonomous effects of a donor population used for bone regeneration. © 2019 American Society for Bone and Mineral Research.

Mesenchymal Stem Cells Decrease Tunnel Widening of Anterior Cruciate Ligament Reconstruction in Rabbit Model

Background and Objectives

The study investigated the effect of mesenchymal stem cells (MSCs) or fibrin glue on tunnel widening after anterior cruciate ligament (ACL) reconstruction compared with biologic free control without any biologic agents in the rabbit model.

Methods and Results

ACL reconstructions were performed in 18 New Zealand white rabbits. All animals were divided into 3 groups according to the following reconstruction conditions and euthanized 12 weeks postoperatively for radiologic and histologic analyses. Thirty-two knees (control group=10; fibrin group=11; MSCs group=11) were finally evaluated. On micro-CT scan, mean femoral tunnel widening on oblique-sagittal image was 0.7±0.4 mm in the control group, 0.22±0.1 mm in the fibrin group and 0.25±0.1 mm in the MSCs group (p=0.001). Fibrin group and MSCs group showed significant differences compared with control group (p=0.002, 0.002). Mean tibial tunnel widening on oblique-sagittal image was 0.76±0.5 mm, 0.27±0.1 mm and 0.29±0.2 mm in the control, fibrin and MSCs group. Fibrin and MSCs group showed significant differences compared with control group (p=0.017, 0.014). Hounsfield Units (HU) were not significantly different between 3 groups (p>0.05). Histological analysis revealed that the architecture of graft in the MSCs group featured hypercellularity and compact collagen deposit.

Conclusion

ACL reconstruction using MSCs seemed decrease tunnel widening in rabbit model. Further study with large animals is required to confirm efficacy on decreasing tunnel widening.

TRPV4-mediated calcium signaling in mesenchymal stem cells regulates aligned collagen matrix formation and vinculin tension

Microarchitectural cues drive aligned fibrillar collagen deposition in vivo and in biomaterial scaffolds, but the cell-signaling events that underlie this process are not well understood. Utilizing a multicellular patterning model system that allows for observation of intracellular signaling events during collagen matrix assembly, we investigated the role of calcium (Ca²⁺) signaling in human mesenchymal stem cells (MSCs) during this process. We observed spontaneous Ca²⁺ oscillations in MSCs during fibrillar collagen assembly, and hypothesized that the transient receptor potential vanilloid 4 (TRPV4) ion channel, a mechanosensitive Ca²⁺-permeable channel, may regulate this signaling. Inhibition of TRPV4 nearly abolished Ca²⁺ signaling at initial stages of collagen matrix assembly, while at later times had reduced but significant effects. Importantly, blocking TRPV4 activity dramatically reduced aligned collagen fibril assembly; conversely, activating TRPV4 accelerated aligned collagen formation. TRPV4-dependent Ca²⁺ oscillations were found to be independent of pattern shape or subpattern cell location, suggesting this signaling mechanism is necessary for aligned collagen formation but not sufficient in the absence of physical (microarchitectural) cues that force multicellular alignment. As cell-generated mechanical forces are known to be critical to the matrix assembly process, we examined the role of TRPV4-mediated Ca²⁺ signaling in force generated across the load-bearing focal adhesion protein vinculin within MSCs using an FRET-based tension sensor. Inhibiting TRPV4 decreased tensile force across vinculin, whereas TRPV4 activation caused a dynamic unloading and reloading of vinculin. Together, these findings suggest TRPV4 activity regulates forces at cell-matrix adhesions and is critical to aligned collagen matrix assembly by MSCs.

Human Subacromial Bursal Cells Display Superior Engraftment Versus Bone Marrow Stromal Cells in Murine Tendon Repair

BACKGROUND

Bone marrow aspirate is a primary source for cell-based therapies with increasing value in the world of orthopaedic surgery, especially in revision cases of tendon and ligament repairs. However, cells within peritendinous structures, such as the paratenon and surrounding bursa, contribute to the native tendon-healing response and offer promising cell populations for cell-based repair strategies. Therefore, the purpose of this study is to investigate the efficacy of cells derived from human subacromial bursa as compared with the current gold standard, bone marrow stromal cells (BMSCs), for tendon repairs in an established in vivo immunodeficient murine patellar tendon defect model.

HYPOTHESIS

Subacromial bursal cells will show superior survival and engraftment into the host tissue as compared with BMSCs.

STUDY DESIGN

Controlled laboratory study.

METHODS

Human subacromial bursal and bone marrow aspirate were harvested from the same donor undergoing rotator cuff repair. Cells were transfected with a fluorescent lentiviral vector to permanently label the cells, encapsulated into fibrin gel, and implanted into bilateral full-length central-width patellar tendon defects of immunodeficient mice. Additional surgery was performed on control mice comparing fibrin without cells and natural healing. At the time of sacrifice, all limbs were scanned on a multiphoton microscope to monitor the engraftment of the human donor cells. Afterward, limbs were assigned to either immunohistochemical or biomechanical analysis.

RESULTS

As compared with BMSCs, implanted subacromial bursal cells displayed superior tissue engraftment and survival. The main healing response in this defect model was the creation of new healing tissue over the anterior surface of the defect space. The implantation of cells significantly increased the thickness of the anterior healing tissue as compared with control limbs that did not receive cells. Cell proliferation was also increased in limbs that received implanted cells, suggesting that the donor cells stimulated a more robust healing response. Finally, these changes in the healing response did not lead to significant changes in mechanical properties.

CONCLUSION

The subacromial bursa, while often removed during rotator cuff repair, may harbor a more suitable cell source for tendon repair than BMSCs, as bursal cells display superior engraftment and survival in tendon tissue. In addition, the subacromial bursa may be a more accessible cell source than bone marrow aspirate.

CLINICAL RELEVANCE

The subacromial bursa contains a cell population that responds to tendon injury and may provide a more optimal cell source for tendon repair and regeneration strategies. Therefore, cells could be harvested from this tissue in the future, as opposed to the current practice of bursectomy and debridement.

Cell Therapies in Tendon, Ligament, and Musculoskeletal System Repair

In the last few decades, several techniques have been used to optimize tendon, ligament, and musculoskeletal healing. The evidence in favor of these techniques is still not proven, and level I studies are lacking. We performed an analysis of the therapeutic strategies and tissue engineering projects recently published in this field. Here, we try to give an insight into the current status of cell therapies and the latest techniques of bioengineering applied to the field of orthopedic surgery. The future areas for research in the management of musculoskeletal injuries are outlined. There are emerging technologies developing into substantial clinical treatment options that need to be critically evaluated. Mechanical stimulation of the constructs reproduces a more propitious environment for effective healing.

Bone Marrow Stem Cells-Seeded Polyethylene Terephthalate Scaffold in Repair and Regeneration of Rabbit Achilles Tendon

The objective of this study was to evaluate the effect of bone marrow stem cells (BMSCs)-seeded polyethylene terephthalate (PET) scaffold for Achilles tendon repair in a rabbit model. The allogeneic BMSCs were seeded onto the PET scaffold and cultured in vitro for 14 days. Sixteen mature New Zealand rabbits underwent surgery to establish a 2-cm Achilles tendon defect model. The BMSCs-seeded PET scaffold was implanted into the defect of one limb (BMSCs-PET group), while the PET scaffold without BMSCs was implanted into the defect of contralateral limb as the control (PET group). All rabbits were sacrificed at 6 and 12 weeks after surgery. At 12 weeks after surgery, macroscopic and histological results showed formation of tendon-like tissues, and the structure was more mature in the BMSCs-PET group. Immunohistochemical analysis and real-time polymerase chain reaction (RT-PCR) demonstrated that the collagen I and collagen III were significantly higher in the BMSCs-PET group compared with those in the PET group. Mechanically, both the failure load and the average stiffness were significantly higher in the BMSCs-PET group than those in the PET group. In conclusion, BMSCs-seeded PET scaffold could effectively facilitate the healing process after being implanted in a rabbit Achilles tendon defect model.

Current development of biodegradable polymeric materials for biomedical applications

In the last half-century, the development of biodegradable polymeric materials for biomedical applications has advanced significantly. Biodegradable polymeric materials are favored in the development of therapeutic devices, including temporary implants and three-dimensional scaffolds for tissue engineering. Further advancements have occurred in the utilization of biodegradable polymeric materials for pharmacological applications such as delivery vehicles for controlled/sustained drug release. These applications require particular physicochemical, biological, and degradation properties of the materials to deliver effective therapy. As a result, a wide range of natural or synthetic polymers able to undergo hydrolytic or enzymatic degradation is being studied for biomedical applications. This review outlines the current development of biodegradable natural and synthetic polymeric materials for various biomedical applications, including tissue engineering, temporary implants, wound healing, and drug delivery.

Evaluation of dynamic change in regenerated tendons in a mouse model

BACKGROUND

Using the film model method, the process whereby a substance called tendon gel is secreted from transected tendon ends and changed into a tendon after application of a traction force is known. The objective of this study was to investigate the association between mechanical properties in the early stages of tendon regeneration and time by using the film model method.

METHOD

Adult male ddY mice, closed colony mice established and maintained in Japan, were prepared for each experimental group. The study animals were 30 mice and were divided into three groups of 10 mice each. Ten specimens of tendon gel secreted from the transected tendon ends were collected on days 10, 15, and 20 postoperatively. While a traction force of 0.00245 N was applied to these specimens, the process of tendon gel changing into a tendon was video recorded for 24 h, and the length of extension was measured over time. Regenerated tendons were stained with hematoxylin and eosin for histological examination. Healing site was studied histologically according to the our maturity score with reference to the Bonar's scale.

RESULTS

The day 10 specimens gradually stretched for 12 h after the start of pulling and transformed into tendons. In contrast, the day 15 and 20 specimens stretched immediately after the start of pulling and transformed into tendons. The day 10 specimens stretched significantly more than the day 15 and 20 specimens (mechanical strain; 0.43 ± 0.26%, 0.03 ± 0.02%, and 0.03 ± 0.01%, respectively)Statistically significant differences were observed in the day 10 specimens than in the day 15 and 20 specimens. (P < 0.017). Using our maturity scores, the day 15 and 20 specimens were more mature than the day 10 specimens. (1.6 ± 0.68, 3.9 ± 0.54, and 4.8 ± 0.64, respectively) Statistically significant differences were observed in the day 10 specimens than in the day 15 and 20 specimens (P < 0.017).

CONCLUSION

Tendon gel physiologically and histologically matures on or after day 15 and becomes stronger dynamically in mechanical strength after day 15 than after day 10.

Cyclic Uniaxial Tensile Strain Enhances the Mechanical Properties of Engineered, Scaffold-Free Tendon Fibers

The treatment of injured tendon is an ever-increasing clinical and financial burden, for which tissue-engineered replacements have shown great promise. Recently, there has been growing interest in a more regenerative approach to tissue engineering, in which the cells' abilities to self-assemble and create matrix are harnessed to create tissue constructs without the use of a scaffold. Herein, utilizing our scaffold-free technique to engineer tendon at the single fiber level, we study how applied mechanical loading, namely cyclic uniaxial strain, influences the mechanical properties and nuclear alignment of developing tendon fiber constructs. Engineered fibers were subjected to 1, 3, and 7 days of intermittent uniaxial loading (0.0-0.7% sinusoidal strain), and then characterized mechanically by constant-rate elongation to failure to obtain tensile properties and histologically to examine cytoskeletal arrangement and nuclear shape, and characterized using real-time polymerase chain reaction to measure the expression of tendon-specific makers, scleraxis and tenomodulin. Fiber peak stress, elastic modulus, toughness, and nuclear aspect ratio increased with the presence and duration of loading, while failure strain, toe-in strain, and nuclear area were unchanged. These biomechanical results suggest that cyclic strain promotes matrix deposition in a manner that increases the fiber resistance to stretch, but preserves fiber extensibility over the 7-day loading period. Over 7 days of loading, the scleraxis and tenomodulin expression increased drastically. Histologically, while there was no immediate difference in nuclear area with the addition of loading, nuclear aspect ratio significantly increased with loading duration, such that nuclei became progressively more elongated to the long axis of the fiber. Together with our biomechanical findings, such nuclear deformation suggests that cyclic strain elicits a mechanotransductive response, particularly one that modulates gene expression to promote matrix deposition during fiber development.

Designing the stem cell microenvironment for guided connective tissue regeneration

Adult mesenchymal stem cells (MSCs) are an attractive cell source for regenerative medicine because of their ability to self-renew and their capacity for multilineage differentiation and tissue regeneration. For connective tissues, such as ligaments or tendons, MSCs are vital to the modulation of the inflammatory response following acute injury while also interacting with resident fibroblasts to promote cell proliferation and matrix synthesis. To date, MSC injection for connective tissue repair has yielded mixed results in vivo, likely due to a lack of appropriate environmental cues to effectively control MSC response and promote tissue healing instead of scar formation. In healthy tissues, stem cells reside within a complex microenvironment comprising cellular, structural, and signaling cues that collectively maintain stemness and modulate tissue homeostasis. Changes to the microenvironment following injury regulate stem cell differentiation, trophic signaling, and tissue healing. Here, we focus on models of the stem cell microenvironment that are used to elucidate the mechanisms of stem cell regulation and inspire functional approaches to tissue regeneration. Recent studies in this frontier area are highlighted, focusing on how microenvironmental cues modulate MSC response following connective tissue injury and, more importantly, how this unique cell environment can be programmed for stem cell-guided tissue regeneration.

Tissue-specific endothelial cells: a promising approach for augmentation of soft tissue repair in orthopedics

Biologics are playing an increasingly significant role in the practice of modern medicine and surgery in general and orthopedics in particular. Cell-based approaches are among the most important and widely used modalities in orthopedic biologics, with mesenchymal stem cells and other multi/pluripotent cells undergoing evaluation in numerous preclinical and clinical studies. On the other hand, fully differentiated endothelial cells (ECs) have been found to perform critical roles in homeostasis of visceral tissues through production of an adaptive panel of so-called "angiocrine factors." This newly discovered function of ECs renders them excellent candidates for novel approaches in cell-based biologics. Here, we present a review of the role of ECs and angiocrine factors in some visceral tissues, followed by an overview of current cell-based approaches and a discussion of the potential applications of ECs in soft tissue repair.