Three-dimensional echocardiography improves accuracy and compensates for sonographer inexperience in assessment of left ventricular ejection fraction

[Echocardiographic evaluation of systolic left ventricular function in heart failure: value of alternative parameters for determination of ejection fraction]

Assessment of the left ventricular ejection fraction plays a key role in the echocardiographic diagnosis of heart failure. The parameter most commonly used is the ejection fraction computed with the biplane disc summation method of Simpson; however, there are numerous limitations to this method, such as the assumption of geometrical symmetry, a substantial intraobserver and interobserver variability, foreshortening of the left ventricle and insufficient image quality for endocardial tracking. Alternative parameters for the evaluation of left ventricular function should be taken into consideration. Speckle tracking echocardiography has proven to be a reliable prognostic factor and a good tool for differentiating cardiomyopathies. Simple measurements, which are also feasible with poor image quality, are mitral annular plane systolic excursion (MAPSE) and the velocity of mitral annular movement (Sm or S'). In mitral regurgitation, left ventricular dP/dt represents the time to build up a certain pressure gradient and is therefore a measure of the contractile force exerted. Three-dimensional echocardiography has proven to be an important tool not only for three-dimensional measurement of the left ventricular ejection fraction but also for multivectoral speckle tracking analysis.

Quantitative three-dimensional wall motion analysis predicts ischemic region size and location

Stress echocardiography is an important screening test for coronary artery disease. Currently, cardiologists rely on visual analysis of left ventricular (LV) wall motion abnormalities, which is subjective and qualitative. We previously used finite-element models of the regionally ischemic left ventricle to develop a wall motion measure, 3DFS, for predicting ischemic region size and location from real-time 3D echocardiography (RT3DE). The purpose of this study was to validate these methods against regional blood flow measurements during regional ischemia and to compare the accuracy of our methods to the current state of the art, visual scoring by trained cardiologists. We acquired RT3DE images during 20 brief (<2 min) coronary occlusions in dogs and determined ischemic region size and location by microsphere-based measurement of regional perfusion. We identified regions of abnormal wall motion using 3DFS and by blinded visual scoring. 3DFS predicted ischemic region size well (correlation r (2) = 0.64 against microspheres, p < 0.0001), reducing error by more than half compared to visual scoring (8 +/- 9% vs. 19 +/- 14%, p < 0.05), while localizing the ischemic region with equal accuracy. We conclude that 3DFS is an objective, quantitative measure of wall motion that localizes acutely ischemic regions as accurately as wall motion scoring while providing superior quantification of ischemic region size.

Comparison of contrast enhanced three dimensional echocardiography with MIBI gated SPECT for the evaluation of left ventricular function

Background

In clinical practice and in clinical trials, echocardiography and scintigraphy are used the most for the evaluation of global left ejection fraction (LVEF) and left ventricular (LV) volumes. Actually, poor quality imaging and geometrical assumptions are the main limitations of LVEF measured by echocardiography. Contrast agents and 3D echocardiography are new methods that may alleviate these potential limitations.

Methods

Therefore we sought to examine the accuracy of contrast 3D echocardiography for the evaluation of LV volumes and LVEF relative to MIBI gated SPECT as an independent reference. In 43 patients addressed for chest pain, contrast 3D echocardiography (RT3DE) and MIBI gated SPECT were prospectively performed on the same day. The accuracy and the variability of LV volumes and LVEF measurements were evaluated.

Results

Due to good endocardial delineation, LV volumes and LVEF measurements by contrast RT3DE were feasible in 99% of the patients. The mean LV end-diastolic volume (LVEDV) of the group by scintigraphy was 143 ± 65 mL and was underestimated by triplane contrast RT3DE (128 ± 60 mL; p < 0.001) and less by full-volume contrast RT3DE (132 ± 62 mL; p < 0.001). Limits of agreement with scintigraphy were similar for triplane andfull-volume, modalities with the best results for full-volume. Results were similar for calculation of LV end-systolic volume (LVESV). The mean LVEF was 44 ± 16% with scintigraphy and was not significantly different with both triplane contrast RT3DE (45 ± 15%) and full-volume contrast RT3DE (45 ± 15%). There was an excellent correlation between two different observers for LVEDV, LVESV and LVEF measurements and inter observer agreement was also good for both contrast RT3DE techniques.

Conclusion

Contrast RT3DE allows an accurate assessment of LVEF compared to the LVEF measured by SPECT, and shows low variability between observers. Although RT3DE triplane provides accurate evaluation of left ventricular function, RT3DE full-volume is superior to triplane modality in patients with suspected coronary artery disease.

Volume stitching in three-dimensional echocardiography: distortion analysis and extension to real time

Three-dimensional (3D) echocardiography is challenging due to limitation of the data acquisition rate caused by the speed of sound. ECG-gated stitching of data from several cardiac cycles is a possible technique to achieve higher resolution. The aim of this work is two-fold: it is, firstly, to provide a method for real-time presentation of stitched echocardiographic images acquired over several cardiac cycles and, secondly, to demonstrate that the geometrical distortion of the images is decreased when stitching is applied to 3D ultrasonic data of the left ventricle (LV). We present a volume stitching algorithm that merges data from N consecutive heart cycles into an assembled data volume. The assembly is performed in real time, making immediate volume rendering of the full volume possible. In-vivo images acquired with this technique are presented. Through simulations with a kinematic model of the LV wall, geometrical distortion and volume estimation errors due to long image capture time was quantified for 3D recordings of the LV. Curves showing the variation throughout the cardiac cycle of the maximal geometrical distortion in the LV walls are presented, as well as curves showing the volume estimates compared with the true LV volume of the model. We conclude that real-time display of stitched 3D ultrasound data is feasible and that it is an adequate technique for increasing the volume acquisition rate at a given spatial resolution. Furthermore, the geometrical distortion decreases substantially for data with higher volume rate and, for a full scan of the LV, stitching over at least four cycles is recommended.

Live 3D Echocardiography: A Replacement for Traditional 2D Echocardiography?

OBJECTIVE

We describe the development of real-time 3D imaging and review the previously used versions of 3D echocardiography so that the reader will appreciate why current developments truly do represent a quantum leap in the technology.

CONCLUSION

Three-dimensional echocardiography has now been shown to have several advantages over 2D echocardiography, particularly for volume measurements, visualization of septal defects, and whole-valve evaluation. Given these data, it is clear that 3D echocardiography is here to stay and soon will become part of routine echocardiographic examinations.

Three-dimensional echocardiography: research toy or clinical tool?

Conventional 2D echocardiography is an excellent qualitative imaging method, but its use for quantitation is limited by test-retest reproducibility of image planes. The increasing sophistication of medical treatments for left ventricular dysfunction, hypertension and valvular heart disease has created the need for accurate and reproducible measurements of chamber dimensions. Similarly, improvements in valve repair and catheter-based interventions for valve lesions and septal defects have created the need for better visualisation of cardiac structures. The use of 31) echocardiography may decrease variability both in the quality and interpretation of complex pathology among investigators. Three-dimensional echocardiography is achieved by using a 3D spatial registration device with a conventional 21) scanner, or by using a high-speed, phased-array real-time scanner. The latter are still developmental, so that the technique currently requires use of a 21) scanner, combined with a 31) spatial coordinate system, which may be external or internal to the scanning transducer. An external system permits data acquired from several cardiac windows to be integrated and reconstructed. Image reconstruction is performed using a wire-frame model or surface rendering. Wire-frame models are formed by manual or automatic connection of boundary data points; this approach uses fewer data points than rendering, can be rapidly processed and is sufficient for quantitative analysis. Surface-rendering uses lighting and shading applied to a wire-frame model to produce a realistic 31) display, which may be useful for surgical planning and increasing understanding of anatomic relations. Three-dimensional echocardiography yields more accurate measurements of ventricular volume and function, as well as new measurements such as infarct area. With increased reproducibility and reliability, 3D echocardiography may well prove to be the essential tool required for the serial follow up of left ventricular mass and volume.

Role of Biplane Echocardiography in a Large-volume Clinical Practice: Revamping Strategies for Echocardiography in a Limited Time

OBJECTIVES

We determined the feasibility, learning curve, time efficacy, and the quality of imaging during biplane echocardiography performed in clinical practice with a view to reduce a sonographer's time for image acquisition.

BACKGROUND

Multidimensional echocardiographic imaging has improved the assessment of cardiac geometry and function in clinical settings. However, concerns regarding ease of performance and effects on overall clinical work flow remain inadequately addressed.

METHODS

The study included 100 consecutive unselected patients referred to our echocardiography laboratory. They were randomized to conventional or biplane echocardiography performed by a sonographer without previous knowledge of biplane imaging. Image acquisition time and variables influencing the learning curve and overall image quality were analyzed.

RESULTS

Mean time required for biplane and mono-plane imaging was not different in the first 24 cases. In the remaining cases, mean image acquisition time was reduced significantly in 58 cases (76.3%): biplane, 5.6 minutes (SD 1.3); and monoplane, 6.6 minutes (SD 1.6) ( P = .0003). For both techniques, scanning time was not affected by referral pattern, body habitus, or underlying cardiac lesion. Overall, biplane scanning resulted in reduction in echocardiographic imaging time of 9.1%, maintaining an acceptable image quality in 87% of patients. In the last 20 cases, new software design and superior instrumentation technique improved the mean time gain to 15%.

CONCLUSION

In a high-volume echocardiography laboratory, biplane imaging effectively reduces sonographer time for imaging and improves throughput by increasing the number of comprehensive ultrasound studies that can be performed in a limited time.

Hcc-1 is a novel component of the nuclear matrix with growth inhibitory function

Hcc-1 is a novel nuclear protein containing the SAF-box DNA-binding domain. It binds to both double-stranded and single-stranded DNA with higher affinity for the single-stranded form. In addition, it also binds specifically to scaffold/matrix attachment region DNA. These nucleic acid-binding characteristics suggest a potential function for Hcc-1 as a component of the heterogeneous ribonucleoprotein complex. Using a yeast two-hybrid screen, two DEAD-box RNA helicases, BAT1 and DDX39, were identified as proteins that interact with Hcc-1. Interactions with these RNA helicases suggested a role for Hcc-1 in nucleic acid biogenesis. Expression of Hcc-1 in the HEK293 cell line resulted in a slower growth rate compared to controls (p = 0.0173) and an accumulation of cells at the G2/M phase (p = 0.0276 compared to control HEK293 cells). Taken together, these results suggest a role for Hcc-1 in growth regulation and nucleic acids metabolism.

Real-Time Three-Dimensional Echocardiography Using a Novel Matrix Array Transducer

Three-dimensional echocardiography has multiple advantages over two-dimensional echocardiography, such as accurate left ventricular quantification and improved spatial relationships. However, clinical use of three-dimensional echocardiography has been impeded by tedious and time-consuming methods for data acquisition and post-processing. A newly developed matrix array probe, which allows real-time three-dimensional imaging with instantaneous on-line volume-rendered reconstruction, direct manipulation of thresholding, and cut planes on the ultrasound unit may overcome the aforementioned limitations. This report will review current methods of three-dimensional data acquisition, emphasizing the real-time methods and clinical applications of the new matrix array probe.

Validation of a volumic reconstruction in 4-d echocardiography and gated SPECT using a dynamic cardiac phantom

A dynamic cardiac phantom was used as a reference to compare the volumes reconstructed with 4-D echocardiography and gated single-photon emission computed tomography (SPECT). 4-D echocardiography used a new prototype of rotating scan head to acquire ultrasound (US) images during a cardiac cycle, associated with a new protocol (left ventricular 4-D or LV 4-D) to reconstruct the volume deformations of the heart as a function of time. Gated SPECT data were acquired with a standard single-head gamma camera, and the reconstructions were carried out using the Mirage software released by Segami. The influences of different LV 4-D parameters were tested and analyzed. End-diastolic volume, end-systolic volume, and ejection fraction were measured using both LV 4-D and gated SPECT. Results obtained showed a straight correlation between the two examinations. The agreement confirmed the relevance of the comparisons. This study is an initial step before conducting clinical trials to exhaustively compare the two modalities.

Three-dimensional visual guidance improves the accuracy of calculating right ventricular volume with two-dimensional echocardiography

Three-dimensional guidance programs have been shown to increase the reproducibility of 2-dimensional (2D) left ventricular volume calculations, but these systems have not been tested in 2D measurements of the right ventricle. Using magnetic fields to identify the probe location, we developed a new 3-dimensional guidance system that displays the line of intersection, the plane of intersection, and the numeric angle of intersection between the current image plane and previously saved scout views. When used by both an experienced and an inexperienced sonographer, this guidance system increases the accuracy of the 2D right ventricular volume measurements using a monoplane pyramidal model. Furthermore, a reconstruction of the right ventricle, with a computed volume similar to the calculated 2D volume, can be displayed quickly by tracing a few anatomic structures on 2D scans.

Four-dimensional reconstruction of the left ventricle using a fast rotating classical phased array scan head: preliminary results

The evaluation of left ventricular function by noninvasive methods is still a major problem in cardiology. Two-dimensional echocardiography requires mental reconstruction of the heart by the physician and is always based on approximation of heart shapes and volumes. Three-dimensional echocardiography is promising but has rhythmic and function constraints because of the acquisition during many cardiac cycles. This article reports a study carried out to validate a new 4-dimensional echocardiography method. With the use of a classical phased-array sensor with a fast rotating motorized motion and a standard ultrasound system, many slices at different angulations are obtained in a single cardiac cycle. After manual endocardial delineation and computation, a representation of the left ventricle (beating heart) and a volume quantification are obtained at each instant of the cardiac cycle. This method has been tested on 11 healthy volunteers and the results are in agreement with those obtained with standard 2-dimensional echocardiography. Because of its simplicity of operation and short time acquisition, this new imaging modality is highly valuable in left ventricle evaluation, even if further studies on pathologic hearts need to be performed.

Importance of transducer displacement and tilting on three-dimensional echocardiographic volume assessment using apical or off-axis rotational acquisition: an in vitro study

OBJECTIVE

The goal of this study was to assess effects of translation (horizontal displacement) and angulation (transducer tilting) on 3-dimensional (3D) echocardiographic volumes of both balloons and human left ventricles after autopsy.

METHODS

Six water-filled (non-) aneurysmatic balloons of 150, 250, and 350 mL and 3 hearts of different sizes and shapes were suspended upright in a water bath. Angulation and/or translation was performed respectively by tilting the transducer with a mechanical arm in a vertical plane relative to the balloon tip or true apex of the hearts and by shifting the water bath in the same vertical plane. For balloon and left ventricular (LV) volume assessment, a 3D conical data set was obtained by TomTec rotational acquisition in combination with a HP Sonos 5500 ultrasound machine.

RESULTS

For the 6 balloons, translation from 1 to 4 cm yielded volumes of up to 74% of the optimal volume (100%); angulation of 10 degrees or 20 degrees, volumes of up to 80% and 34%. Translation with 10-degree angulation yielded volumes up to 64%; for 20-degree angulation and translation, there was no volume loss. Results were similar for the left ventricles.

CONCLUSIONS

Even minor angulation or translation of the transducer yields substantial underestimation of the true volume. Off-axis para-apical views, however, defined as angulation of 20 degrees and greater than 0.5 cm translation in this in vitro model, obviate volume underestimation. Such views in patients, if obtainable, may be an attractive alternative for conventional apical 3D acquisition, especially in dilated and aneurysmatic hearts.

Estimation of 3D left ventricular deformation from echocardiography

The quantitative estimation of regional cardiac deformation from 3D image sequences has important clinical implications for the assessment of viability in the heart wall. Such estimates have so far been obtained almost exclusively from Magnetic Resonance (MR) images, specifically MR tagging. In this paper we describe a methodology for estimating cardiac deformations from 3D echocardiography (3DE). The images are segmented interactively and then initial correspondence is established using a shape-tracking approach. A dense motion field is then estimated using a transversely isotropic linear elastic model, which accounts for the fiber directions in the left ventricle. The dense motion field is in turn used to calculate the deformation of the heart wall in terms of strain in cardiac specific directions. The strains obtained using this approach in open-chest dogs before and after coronary occlusion, show good agreement with previously published results in the literature. They also exhibit a high correlation with strains produced in the same animals using implanted sonomicrometers. This proposed method provides quantitative regional 3D estimates of heart deformation from ultrasound images.