Effects of addition of hydrophobic sucrose fatty acid oligoesters on crystallization rates of n-hexadecane in oil-in-water emulsions

Water Droplets Tailored as Wax Crystal Carriers to Mitigate Wax Deposition of Emulsion

This study explores how the micro-distribution change of wax crystals from the continuous oil phase to the oil-water interface mitigates the macro wax deposition of an emulsion. Two types of interfacial actions between wax crystals and water droplets, interfacial adsorption and interfacial crystallization, which were induced by two different emulsifiers, sorbitan monooleate (Span 80) and sorbitan monostearate (Span 60), respectively, were detected by differential scanning calorimetry and microscopy observation. The wax interfacial crystallization promoted by Span 60 resulted in the wax being nucleated directly at the oil-water interface prior to the continuous oil phase, conferring the nascent wax crystals and water droplets to be combined as coupled particles. The utilization of the wax interfacial crystallization behavior to hinder wax deposition of an emulsion was further explored. When the coupled wax crystal-water droplet particles were formed during the wax deposition process, water droplets acted as wax crystal carriers, entraining these nascent wax crystals to disperse in the emulsion, which significantly reduced the amount of wax crystals available to form the network of the deposit. In addition, this change also led to the basic structural units in the wax deposit evolving from wax crystal clusters/networks to water droplet flocs. The study elucidates that through adjusting the dispersion of wax crystals from the oil phase to the oil-water interface, water droplets could act as a functional component to tailor the properties of the emulsion or resolve related flow and deposition problems in pipeline transportation.

Stabilization of solid lipid nanoparticles with glycyrrhizin

This study investigated the influence of saponin glycyrrhizin on the formation and stability of solid lipid nanoparticles. The hypothesis was that glycyrrhizin facilitates the formation of stable crystalline lipid particles due to its molecular characteristics and slows down polymorphic transition. Tristearin solid lipid nanoparticles emulsified with glycyrrhizin at varying concentrations at pH 7 and 3 were generated by hot high-pressure homogenization. The influence of glycyrrhizin on the physical stability and crystallization behavior of solid lipid nanoparticles was evaluated by dynamic and static lights scattering, electrophoretic light scattering, optical microscopy, visual observations, and differential scanning calorimetry. The results showed that glycyrrhizin formed nanosized solid lipid nanoparticles at both pH 7 and 3. The glycyrrhizin concentration and the pH applied governed the crystallization behavior and the polymorphic stability as well as the physical appearance. Overall, glycyrrhizin showed remarkable ability to stabilize solid lipid nanoparticles against polymorphic transition over time. These results are relevant for food, pharmaceutical, and cosmetic industries to form stable carrier systems by using natural plant-based saponins as surfactants.

Improved Thermal Properties and Flow Behavior of Palm Olein-Based Diacylglycerol: Impact of Sucrose Stearate Incorporation

Palm olein-based diacylglycerol (POL-DAG) oil is a healthy product that is produced through enzymatic reaction and purification processes. However, POL-DAG oil easily solidifies at room temperature and crystallizes at high temperatures. The effect of different concentrations of sucrose stearate (1 and 10 g kg−1) added as a nonionic emulsifier, to POL-DAG oil containing 800 g kg−1 diacylglycerol, on its physical properties and flow behavior were investigated. The thermal properties of POL-DAG oil in melting, crystallization transition, and onset temperature were significantly decreased (p < 0.05) with the addition of emulsifiers. Besides, the incorporation of emulsifiers also significantly reduced (p < 0.05) the hardness of POL-DAG oil. Moreover, all POL-DAG oils with emulsifiers incorporated exhibited shear-thinning behavior, a low consistency coefficient (K) and a low apparent viscosity. The present study resolves the solidification issue and eases the pourability of POL-DAG oil by the incorporation of sucrose stearate. The process of adding an emulsifier to POL-DAG oil is a simple method that does not require advanced technology or process modifications to manage the POL-DAG oil and thus is highly applicable for the fats and oils industries and palm oil refineries.

Effect of Sucrose Esterified Fatty Acid Moieties on the Crystal Nanostructure and Physical Properties of Water-in-oil Palm-based Fat Blends

The effects of sucrose ester of fatty acid (SEF) on the nanostructure and the physical properties of water-in-oil (W/O)-type emulsified semisolid fats were investigated. Model emulsions including palm-based semisolid fats and fully hydrogenated rapeseed oils with 0.5% SEF or fractionated lecithin, were prepared by rapidly cooling crystallization using 0.5% monoacylglycerol as an emulsifier. The SEFs used in this study were functionalized with various fatty acids, namely, lauric, palmitic, stearic, oleic, and erucic acids. Cryogenic transmission electron microscopy (cryo-TEM) was used to observe the sizes of the solvent- extracted nanoplatelets. The solid fat content (SFC), oil migration value, and storage elastic modulus were also determined. The average crystal size, which was measured in length, of the fat blends with SEFs containing saturated fatty acids (namely, palmitic and stearic acids) was smaller than that of the SEFs containing unsaturated fatty acids (namely, oleic and erucic acids). The effects exerted by these fatty acid moieties on the spherulite size in the corresponding bulk fat blends were observed via polarized microscopy (PLM). The results suggest that nanostructure formation upon the addition of SEF ultimately influenced these aggregated microstructures. Generally, smaller platelets resulted in higher SFC in the fat phase, and a high correlation between the SFC and the G' values in W/O emulsion fats was observed (R² = 0.884) at 30°C. In contrast, the correlation was low at 10℃. Furthermore, samples with larger nanocrystals had a higher propensity for oil migration. Thus, the addition of SEF regulated the fat crystal nanostructure during nucleation and crystal growth, which could ultimately influence the physical properties of commercially manufactured fat products such as margarine.

Nucleation of melt: From fundamentals to dispersed systems

The most evident aspects of a first order transition of a system from an old to a new phase, are the presence of a discontinuity at the interface between both phases and the thermal effects related to the latent heat exchanged with the surrounding environment. These effects are the result of a sequence of events promoted by thermodynamic conditions persisting over the equilibrium in a metastable state. The breakdown of metastability is promoted by infinitesimal energy fluctuations resulting in the germination of clusters of the new phase that can grow to a critical size (nucleus) and then develop or vanish. Examples of these sequences are common in various technological fields such as combustion, food processing, pharmaceutical manufacturing, condensation, and phase change heat transfer, etc. This work aims to highlight a logical path that leads the readers from the fundamental phenomenology to the most intricated aspects of the nucleation within dispersed systems such as oil-in-water emulsions. Differences between the homogeneous and heterogeneous mechanisms are, under the light of the Classical Nucleation Theory (CNT), presented in bulk and confined systems until defining a minimum confinement size. By collecting insights coming from a rich scientific literature mostly focused on the stability of emulsified systems, the discussion is then on the aspects related to the surface related mechanisms. Two main aspects are then considered: a) the wettability of the nucleating cluster by the surrounding melt; b) the affinity between the adsorbed layer, where a surfactant is located, and the oil melt phase (mainly n-alkanes and triacylglycerols with different moieties). In cases where nucleation is dominating over the dewetting of the nucleus, the contact angle can be considered as a constant value. The affinity in terms of molecular features between the surfactant and the oil phase can promote the template effect. Several factors seem to play a role in this interaction such as the thermal characteristics of the surfactant and comparable dimensions between the molecule (or fractions) of the dispersed compound and the tail of the surfactant.

Nucleation in food colloids

Nucleation in food colloids has been studied in detail using ultrasound spectroscopy. Our data show that classical nucleation theory (CNT) remains a sound basis from which to understand nucleation in food colloids and analogous model systems using n-alkanes. Various interpretations and modifications of CNT are discussed with regard to their relevance to food colloids. Much of the evidence presented is based on the ultrasound velocity spectrometry measurements which has many advantages for the study of nucleating systems compared to light scattering and NMR due to its sensitivity at low solid contents and its ability to measure true solid contents in the nucleation and early crystal growth stages. Ultrasound attenuation spectroscopy also responds to critical fluctuations in the induction region. We show, however, that a periodic pressure fluctuation such as a quasi-continuous (as opposed to a pulse comprising only a few pressure cycles) ultrasound field can alter the nucleation process, even at very low acoustic intensity. Thus care must be taken when using ultrasound techniques that the measurements do not alter the studied processes. Quasi-continuous ultrasound fields may enhance or suppress nucleation and the criteria to determine such effects are derived. The conclusions of this paper are relevant to colloidal systems in foods, pharmaceuticals, agro-chemicals, cosmetics, and personal products.

Fat crystallisation at oil-water interfaces

This review focuses on recent advances in the understanding of lipid crystallisation at or in the vicinity of an interface in emulsified systems and the consequences regarding stability, structure and thermal behaviour. Amphiphilic molecules such as emulsifiers are preferably adsorbed at the interface. Such molecules are known for their ability to interact with triglycerides under certain conditions. In the same manner that inorganic crystals grown on an organic matrix see their nucleation, morphology and structure controlled by the underlying matrix, recent studies report a templating effect linked to the presence of emulsifiers at the oil/water interface. Emulsifiers affect fat crystallisation and fat crystal behaviour in numerous ways, acting as impurities seeding nucleation and, in some cases, retarding or enhancing polymorphic transitions towards more stable forms. This understanding is of crucial importance for the design of stable structures within emulsions, regardless of whether the system is oil or water continuous. In this paper, crystallisation mechanisms are briefly described, as well as recent technical advances that allow the study of crystallisation and crystal forms. Indeed, the study of the interface and of its effect on lipid crystallisation in emulsions has been limited for a long time by the lack of in-situ investigative techniques. This review also highlights reported interfacial effects in food and pharmaceutical emulsion systems. These effects are strongly linked to the presence of emulsifiers at the interface and their effects on crystallisation kinetics, and crystal morphology and stability.

Crystals and crystallization in oil-in-water emulsions: implications for emulsion-based delivery systems

Many bioactive components intended for oral ingestion (pharmaceuticals and nutraceuticals) are hydrophobic molecules with low water-solubilities and high melting points, which poses considerable challenges to the formulation of oral delivery systems. Oil-in-water emulsions are often suitable vehicles for the encapsulation and delivery of this type of bioactive component. The bioactive component is usually dissolved in a carrier lipid phase by either dilution and/or heating prior to homogenization, and then the carrier lipid and water phases are homogenized to form an emulsion consisting of small oil droplets dispersed in water. The successful development of this kind of emulsion-based delivery system depends on a good understanding of the influence of crystals on the formation, stability, and properties of emulsions. This review article addresses the physicochemical phenomena associated with the encapsulation, retention, crystallization, release, and absorption of hydrophobic bioactive components within emulsions. This knowledge will be useful for the rational formulation of effective emulsion-based delivery systems for oral delivery of crystalline hydrophobic bioactive components in the food, health care, and pharmaceutical industries.

Comparison of Pickering and network stabilization in water-in-oil emulsions

We compared the efficacy of Pickering crystals, a continuous phase crystal network, and a combination thereof against sedimentation and dispersed phase coalescence in water-in-oil (W/O) emulsions. Using 20 wt % water-in-canola oil emulsions as our model, glycerol monostearate (GMS) permitted Pickering-type stabilization, whereas simultaneous usage of hydrogenated canola oil (HCO) and glycerol monooleate (GMO) primarily led to network-stabilized emulsions. A minimum of 4 wt % GMS or 10 wt % HCO was required for long-term sedimentation stability. Although there were no significant differences between the two in mean droplet size with time, the free water content of the network-stabilized emulsions was higher than Pickering-stabilized emulsions, suggesting higher instability. Microscopy revealed the presence of crystal shells around the dispersed phase in the GMS-stabilized emulsions, whereas in the HCO-stabilized emulsion, spherulitic growth in the continuous phase and on the droplet surface occurred. The displacement energy (E(disp)) to detach crystals from the oil-water interface was ∼10(4) kT, and was highest for GMS crystals. Thermal cycling to induce dispersed phase coalescence of the emulsions resulted in desorption of both GMS and GMO from the interface, which we ascribed to solute-solvent hydrogen bonding between the emulsifier molecules and the solvent oil, based on IR spectra. Overall, Pickering crystals were more effective than network crystals for emulsion stabilization. However, the thermal stability of all emulsions was hampered by the diffusion of the molten emulsifiers from the interface.

Self-assembly of 6-O- and 6'-O-hexadecylsucroses mixture under aqueous conditions

In this paper, we report the self-assembly of 6-O- and 6'-O-hexadecylsucroses mixture under aqueous conditions. The mixture was synthesized by a five-step sequence from sucrose. The SEM image of a sample prepared by drying a dispersion of the mixture in water showed nanoparticles with the diameter of ∼50nm and aggregates that were formed by further assembly of them. The XRD measurement of the sample exhibited the diffraction pattern assignable to face-centered cubic (FCC) structure and the diameter of a sphere, which took part in the FCC structure, was calculated to be 5.1nm. This value was relatively close to that observed in the DLS measurement of a dispersion of the mixture in water and estimated for a spherical micelle based on the molecular sizes of the two sucrose ethers. On the basis of the above findings, the following self-assembly process of the mixture under aqueous conditions was proposed. The mixture formed the spherical micelles with the diameter of ∼5-7nm in water. The micelles regularly organized according to the FCC structure during the drying process from the aqueous dispersion to construct the nanoparticles with the diameter of ∼50nm. Several numbers of the nanoparticles further assembled to form the aggregates.

Factors governing partial coalescence in oil-in-water emulsions

The consequences of the instability mechanism partial coalescence in oil-in-water food emulsions show a discrepancy. On the one hand, it needs to be avoided in order to achieve an extended shelf life in food products like sauces, creams and several milk products. On the other hand, during the manufacturing of products like ice cream, butter and whipped toppings partial coalescence is required to achieve the desired product properties. It contributes to the structure formation, the physicochemical properties (stability, firmness,...) and the sensory perception, like fattiness and creaminess of the final food products. This review critically summarises the findings of partial coalescence in oil-in-water emulsions in order to provide insight in how to enhance and retard it. Next to the pioneering work, a large set of experimental results of more recent work is discussed. First, the general mechanism of partial coalescence is considered and a distinction is made between partial and 'true' coalescence. The main differences are: the required solid particles in the dispersed oil phase, the formation of irregular clusters and the increased aggregation rate. Second, the kinetics of partial coalescence is discussed. In more detail, potential parameters affecting the rate of partial coalescence are considered by means of the encounter frequency and capture efficiency of the fat globules. The flow conditions, the fat volume fraction and the physicochemical properties of continuous aqueous phase affect both the encounter frequency and capture efficiency while the actual temperature, temperature history and the composition and formulation of the emulsion mainly affect the capture efficiency.

Scanning microbeam small-angle X-ray diffraction study of interfacial heterogeneous crystallization of fat crystals in oil-in-water emulsion droplets

We performed scanning microbeam small-angle X-ray diffraction (micro-SAXD) experiments, differential scanning calorimetry (DSC) analysis, and optical microscopic observation of palm mid fraction (PMF) crystals in oil-in-water emulsion droplets. The scanning micro-SAXD experiment was performed by irradiating a synchrotron radiation X-ray microbeam having an area of 5 x 5 microm(2) onto different positions on a 50 microm diameter emulsion droplet after the crystallization of PMF by chilling the emulsion at 5 degrees C. The micro-SAXD patterns were recorded with a two-dimensional (2D) detector, which enabled spatial analysis of polymorphic structures and the orientation of lamella planes of PMF crystals at different positions inside the emulsion droplet. Particular attention was paid to compare the crystallization of PMF in two types of emulsion droplets, hydrophilic polyoxyethylene sorbitan mono-oleate (Tween 80) alone (Tween 80 emulsion) and Tween 80 and hydrophobic sucrose palmitic acid oligoester (P-170) (Tween 80+P-170 emulsion). The DSC study revealed that the PMF crystallization temperature in the Tween 80+P-170 emulsion droplets increased by 3 degrees C compared to that of the Tween 80 emulsion because of the effects of the P-170 additive in promoting PMF crystallization. The micro-SAXD studies revealed the following results. (1) The lamella planes of PMF crystals near the outer edges of the droplet in the Tween 80+P-170 emulsion were mostly parallel to an oil-water interface, whereas the lamella planes of PMF crystals were not always aligned with the oil-water interface in the Tween 80 emulsion droplet. (2) The degree of orientation of the lamellar planes of PMF crystals, which was evaluated from the values of full width at half-maximum of 2D micro-SAXD patterns with respect to azimuthal angle extension, was remarkably higher in the Tween 80+P-170 emulsion than in the Tween 80 emulsion. (3) Polymorphic transformation of PMF from alpha to beta' in the Tween 80+P-170 emulsion was retarded compared to that in the Tween 80 emulsion. These results confirmed that the P-170 additive caused interfacial heterogeneous nucleation through hydrophobic interactions at the oil-water interfaces in the emulsion, which subsequently influenced the arrangements of fat crystals so that the lamellar planes of fat crystals were parallel to the oil-water interface.

Retardation of crystallization-induced destabilization of PMF-in-water emulsion with emulsifier additives

An oil-in-water (O/W) emulsion, in which the oil phase is semi-solid fat, is easily destabilized when stored below the crystallization temperature of the oil phase. Such destabilization, characterized by loss of fluidity at chilled temperature and oil-water separation after re-heating, is caused by inter-droplet bridging of fat crystals protruding out of the emulsion droplets. In the present study, we found that the simultaneous use of additives of highly hydrophobic sucrose oligoester (SOE; P-170) and highly hydrophilic SOE (P-1670) containing palmitic acid moiety remarkably retarded the crystallization-induced destabilization of the O/W emulsion that contains palm-mid-fraction (PMF) as the oil phase. Without the additives, destabilization occurred when the emulsion was cooled from 60 to 0 degrees C and kept at 0 degrees C for 1 day. Microscopic observation revealed that destabilization was caused by coalescence of the oil droplets, which was triggered by the growth of needle-shaped PMF crystals protruding out of the emulsion membranes. However, the addition of P-170 to PMF increased the crystallization temperature of PMF and at the same time retarded the destabilization. Furthermore, the simultaneous addition of P-170 and P-1670 retarded the crystallization-induced destabilization even more. Optical observation, DSC, and synchrotron radiation X-ray diffraction measurements indicated that the P-170 additive enhanced interfacial heterogeneous crystallization to form tiny PMF crystals in the droplets, and that the P-1670 additive retarded morphological change of the PMF crystals into long needle shapes in association with polymorphic transformation from alpha to beta'.

Selection of surfactants for stable paraffin-in-water dispersions, undergoing solid-liquid transition of the dispersed particles

A new experimental procedure is proposed for express evaluation of the coalescence stability of dispersions, in which the dispersed particles undergo solid-liquid phase transition. The procedure includes centrifugation of the dispersion concurrently with the phase transition of the particles and allows precise quantification of dispersion stability in terms of a critical pressure, at which the coalescence between the dispersed particles/drops takes place. The method is applied for studying the effects of surfactant type and concentration on the stability of paraffin-in-water dispersions, which have potential application in energy storage and transportation systems. Several types of water-soluble surfactants (anionic, nonionic, and polymeric) are compared, whereas hexadecane or tetradecane is used as a dispersed phase. Most of the studied individual surfactants are found to be inefficient stabilizers (except for the nonionic Tween 40 and Tween 60). However, the dispersion stability increases significantly after the addition of appropriate cosurfactants, such as hexadecanol, Brij 52, or cocoamidopropyl betaine. Surfactants and cosurfactants with longer hydrophobic tails are better stabilizers than those with shorter tails. The obtained results are discussed from the viewpoint of the mechanisms of particle/drop coalescence during the solid-liquid-phase transition. The consistency and the undercooling temperatures of the studied dispersions are also discussed, because these properties are important for their practical applications. The proposed procedure for evaluation of dispersion stability and some of the conclusions could be relevant to food emulsions, in which dispersed fat particles undergo solid-liquid-phase transition of similar type.

Saturated phospholipids promote crystallization but slow down polymorphic transitions in triglyceride nanoparticles

Some matrix materials proposed for the preparation of solid lipid nanoparticles (e.g. trilaurin) are difficult to crystallize after processing by melt-homogenization. In an attempt to overcome this difficulty, the effect of saturated long-chain phospholipids on the crystallization of nanoparticles based on trilaurin, trimyristin, tripalmitin and tristearin was studied. The phospholipids were used as emulsifiers in combination with sodium glycocholate. Saturated phospholipids increased the crystallization temperature of the triglyceride by several degrees compared to soybean phospholipids. The crystallization pattern was more complex in such systems due to solidification of the phospholipid chains prior to triglyceride crystallization. For most triglycerides, egg lecithin also induced crystallization at higher temperatures than natural soybean lecithin. With trilaurin dispersions, the effect of phospholipids can be utilized to induce crystallization at temperatures relevant for larger scale preparation. The polymorphic transitions of the triglycerides were slower in the presence of egg and saturated lecithin leading to a higher stability of the metastable alpha-form. These effects were particularly pronounced in tristearin systems where a predominant fraction of alpha-phase particles could be observed even after long-term cold storage in dispersions containing hydrogenated soybean lecithin or DPPC. The possibility to prepare triglyceride nanoparticles stable in specific modifications offers new opportunities to study effects of polymorphic form on colloidal stability, drug loading and release properties of such dispersions.

Influences of fatty acid moiety and esterification of polyglycerol fatty acid esters on the crystallization of palm mid fraction in oil-in-water emulsion

We examined the crystallization of palm mid fraction (PMF) in oil-in-water (O/W) emulsion, after adding polyglycerol fatty acid esters (PGFEs). We employed ultrasonic velocity measurements and DSC techniques, with special emphases on the influences of fatty acid moiety and esterification of PGFE. Twelve types of PGFEs were examined as additives. PGFEs have a large hydrophilic moiety composed of 10 glycerol molecules to which palmitic, stearic and behenic acids were esterified as the fatty acid moiety with different degrees of esterification. Crystallization temperature (T(c)) of PMF remarkably increased with increasing concentrations of the PGFEs as the chain length of the fatty acid moiety increased, and the PGFE became more hydrophobic in accordance with increasing degree of esterification. We observed that the heterogeneous nucleation of PMF in the O/W emulsion was activated at the oil-water interface, where the template effect of very hydrophobic long saturated fatty acid chains of the PGFE might play the main role of heterogeneous nucleation.

Effect of sucrose ester addition on nucleation and growth behavior of milk fat-sunflower oil blends

The effects of addition of the sucrose esters (SE) P-1670, P-170, and S-170 to a high-melting fraction of milk fat (HMF) and its blends with sunflower oil (SFO) on nucleation and growth were studied by laser polarized light turbidimetry and polarized light microscopy (PLM). The three SE delayed nucleation of HMF at the temperatures selected. P-1670 did not modify average crystal size after 3 h at crystallization temperature (T(c)) or crystal size distribution and modified crystallization kinetics only slightly. P-170 and S-170, however, markedly diminished crystal size and narrowed crystal size distribution. Activation free energies of nucleation at equivalent supercooling, calculated using the Fisher-Turnbull equation, significantly increased with addition of SE. According to these results, among the mechanisms described in the literature for fats or emulsions, the cocrystallization hypothesis is the one that better described the effects of sucrose esters on crystallization behavior in these systems.