Development of copolymers of poly(d,l-lactide) and methoxypolyethylene glycol as micellar carriers of paclitaxel

Ultrasonic Film Rehydration Synthesis of Mixed Polylactide Micelles for Enzyme-Resistant Drug Delivery Nanovehicles

A facile technique for the preparation of mixed polylactide micelles from amorphous poly-D,L-lactide-block-polyethyleneglycol and crystalline amino-terminated poly-L-lactide is described. In comparison to the classical routine solvent substitution method, the ultrasonication assisted formation of polymer micelles allows shortening of the preparation time from several days to 15-20 min. The structure and morphology of mixed micelles were analyzed with the assistance of electron microscopy, dynamic and static light scattering and differential scanning calorimetery. The resulting polymer micelles have a hydrodynamic radius of about 150 nm and a narrow size distribution. The average molecular weight of micelles was found to be 2.1 × 107 and the aggregation number was calculated to be 6000. The obtained biocompatible particles were shown to possess low cytotoxicity, high colloid stability and high stability towards enzymatic hydrolysis. The possible application of mixed polylactide micelles as drug delivery vehicles was studied for the antitumor hydrophobic drug paclitaxel. The lethal concentration (LC50) of paclitaxel encapsulated in polylactide micelles was found to be 42 ± 4 µg/mL-a value equal to the LC50 of paclitaxel in the commercial drug Paclitaxel-Teva.

The in vivo fate of polymeric micelles

This review aims to provide a systemic analysis of the in vivo, as well as subcellular, fate of polymeric micelles (PMs), starting from the entry of PMs into the body. Few PMs are able to cross the biological barriers intact and reach the circulation. In the blood, PMs demonstrate fairly good stability mainly owing to formation of protein corona despite controversial results reported by different groups. Although the exterior hydrophilic shells render PMs "long-circulating", the biodistribution of PMs into the mononuclear phagocyte systems (MPS) is dominant as compared with non-MPS organs and tissues. Evidence emerges to support that the copolymer poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) is first broken down into pieces of PEG and PLA and then remnants to be eliminated from the body finally. At the cellular level, PMs tend to be internalized via endocytosis due to their particulate nature and disassembled and degraded within the cell. Recent findings on the effect of particle size, surface characteristics and shape are also reviewed. It is envisaged that unraveling the in vivo and subcellular fate sheds light on the performing mechanisms and gears up the clinical translation of PMs.

A Review of Polymeric Micelles and Their Applications

Self-assembly of amphiphilic polymers with hydrophilic and hydrophobic units results in micelles (polymeric nanoparticles), where polymer concentrations are above critical micelle concentrations (CMCs). Recently, micelles with metal nanoparticles (MNPs) have been utilized in many bio-applications because of their excellent biocompatibility, pharmacokinetics, adhesion to biosurfaces, targetability, and longevity. The size of the micelles is in the range of 10 to 100 nm, and different shapes of micelles have been developed for applications. Micelles have been focused recently on bio-applications because of their unique properties, size, shape, and biocompatibility, which enhance drug loading and target release in a controlled manner. This review focused on how CMC has been calculated using various techniques. Further, micelle importance is explained briefly, different types and shapes of micelles are discussed, and further extensions for the application of micelles are addressed. In the summary and outlook, points that need focus in future research on micelles are discussed. This will help researchers in the development of micelles for different applications.

Biologically Relevant Micellar Nanocarrier Systems for Drug Encapsulation and Functionalization of Metallic Nanoparticles

The preparation of new and functional nanostructures has received more attention in the scientific community in the past decade due to their wide application versatility. Among these nanostructures, micelles appear to be one of the most interesting supramolecular organizations for biomedical applications because of their ease of synthesis and reproducibility and their biocompatibility since they present an organization similar to the cell membrane. In this work, we developed micellar nanocarrier systems from surfactant molecules derived from oleic acid and tetraethylene glycol that were able to encapsulate and in vitro release the drug dexamethasone. In addition, the designed micelle precursors were able to functionalize metallic NPs, such as gold NPs and iron oxide NPs, resulting in monodispersed hybrid nanomaterials with high stability in aqueous media. Therefore, a new triazole-derived micelle precursor was developed as a versatile encapsulation system, opening the way for the preparation of new micellar nanocarrier platforms for drug delivery, magnetic resonance imaging, or computed tomography contrast agents for therapeutic and diagnostic applications.

Nanoparticles Loaded with Docetaxel and Resveratrol as an Advanced Tool for Cancer Therapy

A growing interest in the use of a combination of chemosensitizers and cytostatics for overcoming cancer resistance to treatment and the development of their delivery systems has been observed. Resveratrol (Res) presents antioxidant, anti-inflammatory and chemopreventive properties but also limits multidrug resistance against docetaxel (Dtx), which is one of the main causes of failure in cancer therapy with this drug. However, the use of both drugs presents challenges, including poor bioavailability, the unfavourable pharmacokinetics and chemical instability of Res and the poor water solubility and dose-limiting toxicity of Dtx. In order to overcome these difficulties, attempts have been made to create different forms of delivery for both agents. This review is focused on the latest developments in nanoparticles for the delivery of Dtx, Res and for the combined delivery of those two drugs. The aim of this review was also to summarize the synergistic mechanism of action of Dtx and Res on cancer cells. According to recent reports, Dtx and Res loaded in a nano-delivery system exhibit better efficiency in cancer treatment compared to free drugs. Also, the co-delivery of Dtx and Res in one actively targeted delivery system providing the simultaneous release of both drugs in cancer cells has a chance to fulfil the requirements of effective anticancer therapy and reduce limitations in therapy caused by multidrug resistance (MDR).

Stereocomplex Polylactide for Drug Delivery and Biomedical Applications: A Review

Polylactide (PLA) is among the most common biodegradable polymers, with applications in various fields, such as renewable and biomedical industries. PLA features poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA) enantiomers, which form stereocomplex crystals through racemic blending. PLA emerged as a promising material owing to its sustainable, eco-friendly, and fully biodegradable properties. Nevertheless, PLA still has a low applicability for drug delivery as a carrier and scaffold. Stereocomplex PLA (sc-PLA) exhibits substantially improved mechanical and physical strength compared to the homopolymer, overcoming these limitations. Recently, numerous studies have reported the use of sc-PLA as a drug carrier through encapsulation of various drugs, proteins, and secondary molecules by various processes including micelle formation, self-assembly, emulsion, and inkjet printing. However, concerns such as low loading capacity, weak stability of hydrophilic contents, and non-sustainable release behavior remain. This review focuses on various strategies to overcome the current challenges of sc-PLA in drug delivery systems and biomedical applications in three critical fields, namely anti-cancer therapy, tissue engineering, and anti-microbial activity. Furthermore, the excellent potential of sc-PLA as a next-generation polymeric material is discussed.

Highly loaded deoxypodophyllotoxin nano-formulation delivered by methoxy polyethylene glycol-block-poly (D,L-lactide) micelles for efficient cancer therapy

Cancer is a kind of malignant diseases that threatens human health and the research application of anti-tumor drug therapeutics is growingly always been focused on. Many new compounds with great anticancer activity were synthesized but cannot be hard to be developed into clinical use due to its poor water solubility. Deoxypodophyllotoxin (DPT) is just an example. We develop lyophilized Deoxypodophyllotoxin (DPT) loaded polymeric micelles using methoxy polyethylene glycol-block-Poly (D, L-lactide) (mPEG-PLA). DPT-PM freeze-dried powder was successfully prepared using optimized formulation. mPEG-PLA was added to hydration media before hydrating as cryoprotectants. The freeze-dried powder exhibited white pie-solid without collapsing, and the particle size of DPT-PM reconstituted with water was about 20-35 nm. The entrapment efficiency of the reconstituted solution was 98%, which shows no differences with the micelles before lyophilization. In-vitro cytotoxicity and cellular uptake studies showed that DPT-PM has a higher degree of cytotoxicity comparing with DPT and mPEG-PLA micelles and uptake of mPEG-PLA was concentration and time-dependent. In vivo characterization of DPT-PM was done for pharmacokinetics behaviors, antitumor activity and safety. The obtained results showed significant improvement in plasma clearance bioavailability (p <0.05) and prolonged blood circulation time comparing with DPT-HP-β-CD. Moreover, mPEG-PLA micelles had a better degree of anti-tumor efficacy, this was due to better accumulation of mPEG-PLA in tumor cell via enhanced permeability and retention (EPR) effect. Therefore, DPT-PM has great clinical value, and can be expected to be a novel antitumor preparation.

Impact of covalently Nile Red and covalently Rhodamine labeled fluorescent polymer micelles for the improved imaging of the respective drug delivery system

Novel fluorescently labeled poly(ethylene glycol)-poly(hydroxyoctanoic acid) (MPEG-PHOA) block-copolymers were synthesized for the improved visualization of the deriving polymeric micelle drug delivery system. Albeit commonly used, one has to be aware that by simple incorporation of Nile Red (hydrophobic) or Rhodamine B (hydrophilic) as fluorescent compounds in nanocarriers (e.g., nanoparticles, liposomes or micelles) for imaging applications, these fluorescent probes can diffuse out of the carrier system and lead to artefacts due to the concomitant fluorescence loss or areal distribution. In order to inhibit such an uncontrolled diffusion, the Nile Red derivative 2-((9-(diethylamino)-5-oxo-5H-benzo[a]phenoxazin-2-yl)oxy)acetic acid was synthesized and covalently attached to the MPEG-PHOA block-copolymer via a mild Mitsunobu reaction to yield the desired MPEG-PHOA-Nile Red polymer for micelle preparations. Rhodamine B was coupled via its native carboxylic acid group with the copolymer MPEG-PHOA under mild conditions using DMAP, EDC, and NHS. For the proof of concept, aqueous solutions of composite micelles made of 0.5% (w/w fluorescence dye) MPEG-PHOA-dye and MPEG-PHOA copolymers were prepared ("spiking" of the non-labeled base MPEG-PHOA micelles) and characterized by transmission electron microscopy (TEM), dialysis and fluorescence spectrometry. The fluorescence intensity of the Nile Red in the solutions was followed up at physiological temperatures and pH values (37 °C, pH = 7.4 PBS buffer 0.01 M) over a period of 8 weeks. The labeled and non-labeled micelle formulations were tested in vitro in cells (Rhodamine-micelle formulations), then in vivo in a case study of an ophthalmic application (Nile Red micelle formulations). Both in vitro and in vivo experiments revealed a significant improvement of fluorescence stability of the MPEG-PHOA-dye formulations, facilitating the investigations on tracing the micelles and their stability. The results clearly demonstrate the value of the novel Nile Red and Rhodamine derivatives, whose simple synthesis and covalent attachment may easily be transferred to other nanosized polymeric drug delivery systems, e.g., MPEGylated or non-MPEGylated PLA/PLGA nanoparticles and be envisioned for novel theranostic systems.

pH-Responsive Dual Drug-Loaded Nanocarriers Based on Poly (2-Ethyl-2-Oxazoline) Modified Black Phosphorus Nanosheets for Cancer Chemo/Photothermal Therapy

Synergistic cancer therapy, such as those combining chemotherapeutic and photothermal methods, has stronger treatment effect than that of individual ones. However, it is challenging to efficiently deliver nanocarriers into tumor cells to elevate intracellular drug concentration. Herein, we developed an effective pH-responsive and dual drug co-delivery platform for combined chemo/photothermal therapy. An anticancer drug doxorubicin (DOX) was first loaded onto the surface of black phosphorus (BP). With poly(2-ethyl-2-oxazoline) (PEOz) ligand conjugated onto the polydopamine (PDA) coated BP nanosheets, targeted long circulation and cellular uptake in vivo was significantly improved. With another anticancer drug bortezomib (BTZ) loaded onto the surface of the nanocapsule, the platform can co-deliver two different drugs. The surface charge of the nanocapsule was reversed from negative to positive at the tumor extracellular pH (∼6.8), ionizing the tertiary amide groups along the PEOz chain, thus facilitating the cell internalization of the nanocarrier. The cytotoxicity therapeutic effect of this nanoplatform was further augmented under near-infrared laser irradiation. As such, our DOX-loaded BP@PDA-PEOz-BTZ platform is very promising to synergistic cancer therapy.

Improving Drug Delivery of Micellar Paclitaxel against Non-Small Cell Lung Cancer by Coloading Itraconazole as a Micelle Stabilizer and a Tumor Vascular Manipulator

Although polymeric micelles of paclitaxel (PTX) significantly reduce excipient-induced toxicity compared with Taxol, they exhibit few clinical advantages in tumor inhibition and overall survival. To improve, itraconazole (ITA), an antifungal drug with potent anti-angiogenesis activity, is co-encapsulated together with PTX within the PEG-PLA micelles. The strong intermolecular interactions between the payloads inhibit drug crystallization and prevent drugs from binding with external proteins, render super-stable micelles upon dilution and exposure to biological environment, and enter the tumor cells through endocytosis. The co-encapsulated micelles show strong anti-proliferation potency against non-small-cell lung cancer (NSCLC) and even PTX resistant NSCLC cells in vitro and significantly improve the drug accumulation within the tumor in vivo. Compared with PTX monotherapy or combination therapy using individual PTX and ITA micelles, the co-encapsulated micelle demonstrates strikingly superior efficacy in tumor growth inhibition, recurrence prevention, and reversion of PTX resistance, in Kras mutant patient derived xenografts, orthotropic models, and paclitaxel-resistance subcutaneous models. Besides the pharmacokinetic improvement, therapeutic benefits are also contributed by angiogenesis inhibition and blood vessel normalization by ITA. Utilizing the pharmaceutical and pharmacological synergies between the therapeutic agents, a simple yet effective design of a combination cancer nanomedicine that is industrially scalable and clinically translatable is achieved.

Drug-Polymer Interaction, Pharmacokinetics and Antitumor Effect of PEG-PLA/Taxane Derivative TM-2 Micelles for Intravenous Drug Delivery

PURPOSE

A novel polymer micelle was prepared with a high drug loading, good stability, high tolerance and better anti-tumor effect.

METHODS

TM-2 was encapsulated in poly-block-poly (D, L-lactic acid) self-assembled micelles by the thin-film hydration method. From the critical micelle concentrations of the copolymers, particle size, drug loading and encapsulation efficiency of drug-loading micelles, the appropriate polymer material could be assessed. Comparisons between TM-2 solution and TM-2 micelles were done to evaluate the pharmacokinetics and toxicity in rats, compared with Taxol to evaluate the anti-tumor effect in mice.

RESULTS

The optimized TM-2 micelles achieved a high drug loading (~20%) with the polymer material of PEG_2k-PLA_2.5k, with a particle size of 30 nm and no significant change in particle size after lyophilization. The result of pharmacokinetic experiment displayed that the half-life in vivo was obviously prolonged. The maximum tolerated dose of TM-2 micelles was approximately 25 mg/kg in rats, and the relative tumor growth rate of Taxol (15 mg/kg), TM-2 (10 mg/kg), TM-2 (15 mg/kg) and TM-2 (40 mg/kg) in mice were 49.35%, 49.14%, 36.44 and 9.98% respectively.

CONCLUSIONS

TM-2 micelles with high drug loading increased drug solubility, improved tolerance, antitumor effects and reduced toxicity.

Perspectives on the past, present, and future of cancer nanomedicine

The justification of cancer nanomedicine relies on enhanced permeation (EP) and retention (R) effect and the capability of intracellular targeting due primarily to size after internalization (endocytosis) into the individual target cells. The EPR effect implies improved efficacy. Affinity targeting for solid tumors only occur after delivery to individual cells, which help internalization and/or retention. The design principles have been supported by animal results in numerous publications, but hardly translated. The natures of EP and R, such as frequency of large openings in tumor vasculature and their dynamics, are not understood, in particular, in clinical settings. Although various attempts to address the issues related to EP and delivery, by modifying design factors and manipulating tumor microenvironment, are being reported, they are still verified in artificial rodent tumors which do not mimic the nature of human tumor physiology/pathology in terms of transport and delivery. The clinical trials of experimental nanomedicine have experienced unexpected adverse effects with modest improvement in efficacy when compared to current frontline therapy. Future nanomedicine may require new design principles without consideration of EP and affinity targeting. A possible direction is to set new approaches to intentionally minimize adverse effects, rather than aiming at better efficacy, which can widen the therapeutic window of an anticancer drug of interest. Broadening indications and administration routes of developed therapeutic nanotechnology would benefit patients.

Polymeric Micelles of Biodegradable Diblock Copolymers: Enhanced Encapsulation of Hydrophobic Drugs

Polymeric micelles are potentially efficient in encapsulating and performing the controlled release of various hydrophobic drug molecules. Understanding the fundamental physicochemical properties behind drug⁻polymer systems in terms of interaction strength and compatibility, drug partition coefficient (preferential solubilization), micelle size, morphology, etc., encourages the formulation of polymeric nanocarriers with enhanced drug encapsulating capacity, prolonged circulation time, and stability in the human body. In this review, we systematically address some open issues which are considered to be obstacles inhibiting the commercial availability of polymer-based therapeutics, such as the enhancement of encapsulation capacity by finding better drug⁻polymer compatibility, the drug-release kinetics and mechanisms under chemical and mechanical conditions simulating to physiological conditions, and the role of preparation methods and solvents on the overall performance of micelles.

Renewable poly(δ-decalactone) based block copolymer micelles as drug delivery vehicle: in vitro and in vivo evaluation

Polymers from natural resources are attracting much attention in various fields including drug delivery as green alternatives to fossil fuel based polymers. In this quest, novel block copolymers based on renewable poly(δ-decalactone) (PDL) were evaluated for their drug delivery capabilities and compared with a fossil fuel based polymer i.e. methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-b-PCL). Using curcumin as a hydrophobic drug model, micelles of PDL block copolymers with different orientation i.e. AB (mPEG-b-PDL), ABA (PDL-b-PEG-b-PDL), ABC (mPEG-b-PDL-b-poly(pentadecalactone) and (mPEG-b-PCL) were prepared by nanoprecipitation method. The size, drug loading and curcumin stability studies results indicated that mPEG-b-PDL micelles was comparable to its counterpart mPEG-b-PCL micelles towards improved delivery of curcumin. Therefore, mixed micelles using these two copolymers were also evaluated to see any change in size, loading and drug release. Drug release studies proposed that sustained release can be obtained using poly(pentadecalactone) as crystalline core whereas rapid release can be achieved using amorphous PDL core. Further, mPEG-b-PDL micelles were found to be non-haemolytic, up to the concentration of 40 mg/mL. In vivo toxicity studies on rats advised low-toxic behaviour of these micelles up to 400 mg/kg dose, as evident by histopathological and biochemical analysis. In summary, it is anticipated that mPEG-b-PDL block copolymer micelles could serve as a renewable alternative for mPEG-b-PCL copolymers in drug delivery applications.

Ultrasound-induced mild hyperthermia improves the anticancer efficacy of both Taxol® and paclitaxel-loaded nanocapsules

We study the influence of ultrasound on paclitaxel-loaded nanocapsules in vitro and in vivo. These nanocapsules possess a shell of poly(dl-lactide-co-glycolide)-poly(ethylene glycol) (PLGA-PEG) and a liquid core of perfluorooctyl bromide (PFOB). In vitro experiments show that mechanical effects such as cavitation are negligible for nanocapsules due to their small size and thick and rigid shell. As the mechanical effects were unable to increase paclitaxel delivery, we focused on the thermal effects of ultrasound in the in vivo studies. A focused ultrasound sequence was therefore optimized in vivo under magnetic resonance imaging guidance to obtain localized mild hyperthermia with high acoustic pressure. Ultrasound-induced mild hyperthermia (41-43°C) was then tested in vivo in a subcutaneous CT-26 colon cancer murine model. As hyperthermia is applied, an inhibition of tumor growth for both paclitaxel-loaded nanocapsules and the commercial formulation of paclitaxel, namely Taxol® have been observed (p<0.05). Ultrasound-induced mild hyperthermia at high acoustic pressure appears as an interesting strategy to enhance cytotoxic efficacy locally.

In vitro evaluation of antisense oligonucleotide functionalized core-shell nanoparticles loaded with α-tocopherol succinate

Antisense oligonucleotide (ASO)-conjugated-α-tocopherol succinate (TCS)-loaded-poly(lactic acid)-g-poly(ethylene glycol) nanoparticles (ASO-TCS-PLA-PEG NPs), with the ratio of polymer/TCS of 10:2.5, 10:5, 10:7 (w/w) were prepared for targeting cancer therapy. The amphiphilic PLA, amino terminated PEG graft copolymers were synthesized by ring opening polymerization reaction. Nanoparticles were produced by using double emulsion (w/o/w) solvent evaporation method. ASO-TCS-PLA-PEG NPs demonstrated satisfactory encapsulation and loading efficiency and size distribution. The short-term stability studies were carried out at 4 and 25 °C for 30 days to assess their mean particle size, polydispersity index and zeta potential. The cellular uptake and extended cytoplasmic retention of the NPs in A549 human lung carcinoma and L929 mouse fibroblast cells were examined by fluorescence and confocal microscopy. In human lung cancer cells, ASO-TCS-PLA-PEG NPs exhibited better cellular internalization, cytotoxicity and apoptotic and necrotic effects compared to healthy cell line, L929. These findings showed that ASO-modified nanoparticles could serve as a promising nanocarrier for targeted tumor cells.

Building the design, translation and development principles of polymeric nanomedicines using the case of clinically advanced poly(lactide(glycolide))-poly(ethylene glycol) nanotechnology as a model: An industrial viewpoint

The design of the first polymeric nanoparticles could be traced back to the 1970s, and has thereafter received considerable attention, as evidenced by the significant increase of the number of articles and patents in this area. This review article is an attempt to take advantage of the existing literature on the clinically tested and commercialized biodegradable PLA(G)A-PEG nanotechnology as a model to propose quality building and outline translation and development principles for polymeric nano-medicines. We built such an approach from various building blocks including material design, nano-assembly - i.e. physicochemistry of drug/nano-object association in the pharmaceutical process, and release in relevant biological environment - characterization and identification of the quality attributes related to the biopharmaceutical properties. More specifically, as envisaged in a translational approach, the reported data on PLA(G)A-PEG nanotechnology have been structured into packages to evidence the links between the structure, physicochemical properties, and the in vitro and in vivo performances of the nanoparticles. The integration of these bodies of knowledge to build the CMC (Chemistry Manufacturing and Controls) quality management strategy and finally support the translation to proof of concept in human, and anticipation of the industrialization takes into account the specific requirements and biopharmaceutical features attached to the administration route. From this approach, some gaps are identified for the industrial development of such nanotechnology-based products, and the expected improvements are discussed. The viewpoint provided in this article is expected to shed light on design, translation and pharmaceutical development to realize their full potential for future clinical applications.

125I-Labeled PLA/PEO Block Copolymer: Biodistribution Studies in Rats

Block copolymers have a potential utility as drug carriers. In order to study their in vivo fate, the biodegradable block copolymer poly(D,L- lactide ethylene oxide) (PLA/PEO) (Mw 5000/5000) with a p-methoxyphenyl moiety was radio labeled with 125I. The copolymer was [125I] iodinated in the organic medium by a chloramine T method. The labeling efficiency was about 5%, and the agent was freed from [125I] iodide by dialysis. The tissue distribution of radioactivity was determined at 5 min, 1, 2 and 24 hrs after intravenous injection of male rats with 125I-labeled copolymer in the dose 4.5–5.5 mg/kg. After administration of the labeled copolymer, a high concentration of radioactivity in the liver during the initial time intervals was found. At the subsequent intervals after dosing, an increase in 125I activity in the bowels was determined. The distribution of radioactivity into inflamed areas was evaluated as well. The inflammatory-to-non-inflammatory muscle tissue ratios increased with time from 2.18 (5 min), 3.63 (1 h) to 3.68 (2 hrs); after 24 hrs, this ratio was significantly lower (1.70).

The PLA/PEO copolymer exhibits along residence time in the blood stream and, therefore, it could be employed as a drug delivery system for inflammatory and cancer treatment.

Nano-formulations of drugs: Recent developments, impact and challenges

Nano-formulations of medicinal drugs have attracted the interest of many researchers for drug delivery applications. These nano-formulations enhance the properties of conventional drugs and are specific to the targeted delivery site. Dendrimers, polymeric nanoparticles, liposomes, nano-emulsions and micelles are some of the nano-formulations that are gaining prominence in pharmaceutical industry for enhanced drug formulation. Wide varieties of synthesis methods are available for the preparation of nano-formulations to deliver drugs in biological system. The choice of synthesis methods depend on the size and shape of particulate formulation, biochemical properties of drug, and the targeted site. This article discusses recent developments in nano-formulation and the progressive impact on pharmaceutical research and industries. Additionally, process challenges relating to consistent generation of nano-formulations for drug delivery are discussed.

Design of Micelle Nanocontainers Based on PDMAEMA-b-PCL-b-PDMAEMA Triblock Copolymers for the Encapsulation of Amphotericin B

The clinical application of amphotericin B (AmB), a broad spectrum antifungal agent, is limited by its poor solubility in aqueous medium and also by its proven renal toxicity. In this work, AmB was encapsulated in micelles obtained from the self-assembly of PDMAEMA-b-PCL-b-PDMAEMA triblock copolymers. The amount of encapsulated AmB depended on the copolymer composition, and short blocks of polycaprolactone (PCL) and poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) showed better performance. All the studied formulations exhibited a controlled release of AmB along 150 h. The formulations presented reduced hemotoxicity while maintaining antifungal activities against Candida albicans, Candida krusei, and Candida glabrata comparable with free AmB. A reduction on the hemotoxicity was found to be due to the slow release and subsequent low aggregation achieved with the use of polymer micelle nanocontainers.

Polymeric Micelles: Recent Advancements in the Delivery of Anticancer Drugs

Nanotechnology, in health and medicine, extensively improves the safety and efficacy of different therapeutic agents, particularly the aspects related to drug delivery and targeting. Among various nano-carriers, polymer based macromolecular approaches have resulted in improved drug delivery for the diseases like cancers, diabetes, autoimmune disorders and many more. Polymeric micelles consisting of hydrophilic exterior and hydrophobic core have established a record of anticancer drug delivery from the laboratory to commercial reality. The nanometric size, tailor made functionality, multiple choices of polymeric micelle synthesis and stability are the unique properties, which have attracted scientists and researchers around the world to work upon in this opportunistic drug carrier. The capability of polymeric micelles as nano-carriers are nowhere less significant than nanoparticles, liposomes and other nanocarriers, as per as the commercial feasibility and presence is concerned. In fact polymeric micelles are among the most extensively studied delivery platforms for the effective treatment of different cancers as well as non-cancerous disorders. The present review highlights the sequential and recent developments in the design, synthesis, characterization and evaluation of polymeric micelles to achieve the effective anticancer drug delivery. The future possibilities and clinical outcome have also been discussed, briefly.

Rational design of block copolymer micelles to control burst drug release at a nanoscale dimension

To circumvent the problem of burst drug release from polymeric micelles, we designed three layered ABC micelles consisting of methoxy poly(ethylene oxide) (PEO) as the shell layer (A block); poly(lactic acid) (PLA) of different stereo-chemistries as the outer core (B block) and poly(α-benzylcarboxylate-ε-caprolactone) (PBCL) or poly(ε-caprolactone) (PCL) as the inner core (C block). The micelles were used to encapsulate a model hydrophobic drug, nimodipine. The effect of PLA (B block) incorporation and stereochemistry on the formation of semi crystalline outer cores in ABC triblock copolymer micelles, micelle stability, drug loading and release was then assessed in comparison to diblock copolymer micelles. The PLA outer core was expected to act as a barrier lowering the rate of drug diffusion out of the micellar carrier owing to a high Flory Huggins interaction parameter between nimodipine and PLA (χ=1.35). Introduction of PLA outer cores in ABC block copolymer micelles reduced the burst release of nimodipine from polymeric micelles without jeopardizing its high encapsulation efficiency. In ABC polymeric micelles with stereo-regular PLA blocks; semi-crystalline outer PLA cores were not formed, which was in contrast to PEO-PLA diblock copolymer micelles. Accordingly, PLA stereo-chemistry had no significant effect on drug release in ABC polymeric micelles. In contrast to diblock copolymers, no sign of stereo-complexation in mixed micelles composed of a 50:50 mixture of PdLA and PlLA containing ABC triblock copolymers was observed. The results showed the capability of properly designed ABC triblock copolymer micelles as reservoirs for drug solubilization and depot release at nanoscale dimensions.

STATEMENT OF SIGNIFICANCE

Polymeric micelles are core-shell nanostructures that are widely used for drug delivery. Their hydrophobic core accommodates poor water soluble drugs and their hydrophilic shell allows the whole structure to be water soluble. A common problem with the use of polymeric micelles is leakage of the incorporated drug from these carriers. Here we have shown that a properly designed three layered (ABC) block copolymer micelle with drug compatible blocks at the inner core and drug incompatible blocks at the outer core can be used to reduce the initial fast rate of drug release while providing high amount of drug encapsulated in the core. Moreover, changes in the chemical structure of the inner core may be used to modify the stability of these systems.

The challenges facing block copolymer micelles for cancer therapy: In vivo barriers and clinical translation

The application of block copolymer micelles (BCMs) in oncology has benefitted from advances in polymer chemistry, drug formulation and delivery as well as in vitro and in vivo biological models. While great strides have been made in each of these individual areas, there remains some disappointment overall, citing, in particular, the absence of more BCM formulations in clinical evaluation and practice. In this review, we aim to provide an overview of the challenges presented by in vivo systems to the effective design and development of BCMs. In particular, the barriers posed by systemic administration and tumor properties are examined. The impact of critical features, such as the size, stability and functionalization of BCMs is discussed, while key pre-clinical endpoints and models are critiqued. Given clinical considerations, we present this work as a means to stimulate a renewed focus on the unique chemical versatility bestowed by BCMs and a measured grasp of representative in vitro and in vivo models.

Poly(ethylene glycol) conjugated poly(lactide)-based polyelectrolytes: synthesis and formation of stable self-assemblies induced by stereocomplexation

A series of pH-responsive amphiphilic poly(N,N-dimethylaminoethyl methacrylate)-block-poly(D-lactic acid)-block-poly(N,N-dimethylaminoethyl methacrylate) conjugated with poly(ethylene glycol) (D-PDLA-D@PEG) and D-PLLA-D@PEG copolymers were synthesized using a combination of ring-opening polymerization and atom-transfer radical polymerization followed by sequential quaternization of PDMAEMA chains and azide-alkyne click reaction with alkyne-end PEG. Gel permeation chromatography, nuclear magnetic resonance, and Fourier transform infrared spectroscopy results demonstrate the successful synthesis of the copolymers, and the conjugated PEG percentages in the copolymers can be tuned by the feeding ratios in the quaternization reaction. Conjugating PEG onto the PDMAEMA segments also successfully facilitated the D-PDLA-D@PEG, D-PLLA-D@PEG, and its corresponding 1:1 D/L mixtures to be dissolved directly in aqueous solution at the desired concentration range without using any organic solvents unlike the copolymers without PEG conjugation (D-PDLA-D and D-PLLA-D). We demonstrate control over micellar size, charge, and stability via three different preparation pathways, i.e., solution pH, percentages of PEG conjugation in the copolymers, and formation of PLA stereocomplex in micellar core. Static and dynamic light scattering studies demonstrate that the size of the core-shell micelles increases when the solution pH is reduced due to the protonation of the PDMAEMA segments that caused the osmotic pressure within the micelle to increase until the micelles reached a maximum size. It is interesting to note that the micelles formed by 1:1 D/L mixtures have larger swelling ratios as well as aggregation number and hydrodynamic radius that do not change significantly with pH and dilution, respectively, as compared to micelles formed from individual D or L forms of the copolymers. The enhanced stability of the pH-responsive micelles prepared by direct dissolution of the 1:1 D/L mixtures of the PEG conjugated PLA-based polyelectrolytes in aqueous medium is attributed to the stereocomplex formation between PLLA and PDLA in the micellar core as confirmed by wide-angle X-ray scattering measurements.

Applications of polymer micelles for imaging and drug delivery

Polymeric micelles, self-assembling nano-constructs of amphiphilic copolymers, are widely considered as convenient nano-carriers for a variety of applications, such as diagnostic imaging, and drug and gene delivery. They have demonstrated a variety of favorable properties including biocompatibility, longevity, high stability in vitro and in vivo, capacity to effectively solubilize a variety of poorly soluble drugs, changing the release profile of the incorporated pharmaceutical agents, and the ability to accumulate in the target zone based on the enhanced permeability and retention effect. Moreover, additional functions can be imparted to the micelle-based delivery systems by engineering their surface for specific applications. Various targeting ligands can be attached for cell or intracellular accumulation at a site of interest. Also, the chelation or incorporation of imaging moieties into the micelle structure enables in vivo biodistribution studies. Moreover, pH-, thermo-, ultrasound-, enzyme- and light-sensitive block-copolymers allow for controlled micelle dissociation and triggered drug release in response to the pathological environment-specific stimuli and/or externally applied signals. The combination of these approaches can further improve specificity and efficacy of micelle-based drug delivery to promote the development of smart multifunctional micelles.

Novel core–shell dextran–hemin crosslinked micelles: synthesis, photo-controlled drug release and excellent (synergetic) antitumor effect

In this study, novel core–shell crosslinked dextran–hemin micelles were first successfully synthesized.

Nanotechnology in bladder cancer: current state of development and clinical practice

Nanotechnology is being developed for the diagnosis and treatment of both nonmyoinvasive bladder cancer (NMIBC) and invasive bladder cancer. The diagnostic applications of nanotechnology in NMIBC mainly focus on tumor identification during endoscopy to increase complete resection of bladder cancer while nanotechnology to capture malignant cells or their components continues to be developed. The therapeutic applications of nanotechnology in NMIBC are to reformulate biological and cytotoxic agents for intravesical instillation, combine both diagnostic and therapeutic application in one nanoformulation. In invasive and advanced bladder cancer, magnetic resonance imaging with supraparamagnetic iron oxide nanoparticles can improve the sensitivity and specificity in detecting small metastasis to lymph nodes. Nanoformulation of cytotoxic agents can potentially decrease the toxicity while increasing efficacy.

Innovative use of the taxol binding peptide overcomes key challenges of stable and high drug loading in polymeric nanomicelles

Incorporating a taxol binding peptide into the hydrophobic backbone of polymeric nanomicelles enhances docetaxel loading while maintaining serum stability.

Biophysical, biopharmaceutical and toxicological significance of biomedical nanoparticles

Understanding of interplay between nanoparticles physicochemical and biophysical properties, and their impact on pharmacokinetic biodistribution and toxicological properties help designing of appropriate nanoparticle products for biomedical applications.

Tailoring polymersome bilayer permeability improves enhanced permeability and retention effect for bioimaging

Self-assembled nanoparticles conjugated with various imaging contrast agents have been used for the detection and imaging of pathologic tissues. Inadvertently, these nanoparticles undergo fast, dilution-induced disintegration in circulation and quickly lose their capability to associate with and image the site of interest. To resolve this challenge, we hypothesize that decreasing the bilayer permeability of polymersomes can stabilize their structure, extend their lifetime in circulation, and hence improve the quality of bioimaging when the polymersome is coupled with an imaging probe. This hypothesis is examined by using poly(2-hydroxyethyl-co-octadecyl aspartamide), sequentially modified with methacrylate groups, to build model polymersomes. The bilayer permeability of the polymersome is decreased by increasing the packing density of the bilayer with methacrylate groups and is further decreased by inducing chemical cross-linking reactions between the methacrylate groups. The polymersome with decreased bilayer permeability demonstrates greater particle stability in physiological media and ultimately can better highlight tumors in mice over 2 days compared to those with higher bilayer permeability after labeling with a near-infrared (NIR) fluorescent probe. We envisage that the resulting nanoparticles will not only improve diagnosis but also further image-guided therapies.

Drug delivery design for intravenous route with integrated physicochemistry, pharmacokinetics and pharmacodynamics: illustration with the case of taxane therapeutics

This review is aimed at combining the published data on taxane formulations into a generalized Drug Delivery approach, starting from the physicochemistry and assessing its relationships with the pharmacokinetics, the biodistribution and the pharmacodynamics. Owing to the number and variety of taxane formulation designs, we considered this class of cytotoxic anticancer agents of particular interest to illustrate the concepts attached to this approach. According to the history of taxane development, we propose a classification as (i) "surfactant-based formulations" first generation, (ii) "surfactant-free formulations" second generation and (iii) "modulated pharmacokinetics drug delivery systems" third generation. Since our objective was to make the link between (i) the physicochemistry of the drug and carrier and (ii) the efficacy and safety of the drug in preclinical animal models and (iii) in human, we focused on the drug delivery technologies that were tested in clinic.