Characterization of solid-state forms of celecoxib

Different or the same? exploring the physicochemical properties and molecular mobility of celecoxib amorphous forms

The influence of different preparation methods on the physicochemical properties of amorphous solid forms have gained considerable attention, especially with recent publications on pharmaceutical polyamorphism. In the present study, we have investigated the possible occurrence of polyamorphism in the drug celecoxib (CEL) by investigating the thermal behavior, morphology, structure, molecular mobility and physical stability of amorphous CEL obtained by quench-cooling (QC), ball milling (BM) and spray drying (SD). Similar glass transition temperatures but different recrystallization behaviors were observed for CEL-QC, CEL-BM and CEL-SD using modulated differential scanning calorimetry analysis. A correlation between the different recrystallization behaviors of the three CEL amorphous forms and the respective distinct powder morphologies, was also found. Molecular dynamics simulations however, reveal that CEL presents similar molecular conformational distributions when subjected to QC and SD. Moreover, the obtained molecular conformational distributions of CEL are different from the ones found in its crystal structure and also from the ones found in the lowest-energy structure obtained by quantum mechanical calculations. The type and strength of CEL hydrogen bond interactions found in CEL-QC and CEL-SD systems are almost identical, though different from the ones presented in the crystal structure. Pair distribution function analyses and isothermal microcalorimetry show similar local structures and structural relaxation times, respectively, for CEL-QC, CEL-BM and CEL-SD. The present work shows that not only similar physicochemical properties (glass transition temperature, and structural relaxation time), but also similar molecular conformational distributions were observed for all prepared CEL amorphous systems. Hence, despite their different recrystallization behaviors, the three amorphous forms of CEL did not show any signs of polyamorphism.

Neuroprotective efficiency of celecoxib vesicular bilosomes for the management of lipopolysaccharide-induced Alzheimer in mice employing 23 full factorial design

The aim of this study was to develop and evaluate bilosomes loaded with Celecoxib (CXB) for the efficient treatment of Alzheimer. The thin-film hydration approach was utilized in the formulation of CXB bilosomes (CXB-BLs). The study used a 23-factorial design to investigate the impact of several formulation variables. Three separate parameters were investigated: bile salt type (X1), medication amount (X2), and lipid-bile salt ratio (X3). The dependent responses included entrapment efficiency (Y1: EE %), particle size (Y2: PS), and zeta potential (Y3: ZP). The formulation factors were statistically optimized using the Design-Expert® program. The vesicles demonstrated remarkable CXB encapsulation efficiency, ranging from 94.16 ± 1.91 to 98.38 ± 0.85%. The vesicle sizes ranged from 241.8 ± 6.74 to 352 ± 2.34 nm. The produced formulations have high negative zeta potential values, indicating strong stability. Transmission electron microscopy (TEM) revealed that the optimized vesicles had a spherical form. CXB release from BLs was biphasic, with the release pattern following Higuchi's model. In vivo studies confirmed the efficiency of CXB-BLs in management of lipopolysaccharide-induced Alzheimer as CXB-BLs ameliorated cognitive dysfunction, decreased acetylcholinesterase (AChE), and inhibited neuro-inflammation and neuro-degeneration through reducing Toll-like receptor (TLR4), and Interleukin-1β (IL-1β) levels. The findings suggested that the created CXB-BLs could be a potential drug delivery strategy for Alzheimer's treatment.

Preparation of celecoxib loaded bioactive glass chitosan composite hydrogels: a simple approach for therapeutic delivery of NSAIDs

Arthritis causes inflammatory damage to joints and connective tissues. In the treatment of arthritis, precise and controlled drug delivery to the target site is among the frontline research approaches. In the present research work, celecoxib drug and bioactive glass incorporated chitosan hydrogels were fabricated by the freeze gelation method. Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis/differential scanning calorimetry techniques were used to characterize the hydrogels. Different kinetic models were applied to study the drug release kinetics. The celecoxib release was mainly controlled by a Fickian diffusion process followed by the Higuchi model. Maximum 86.2% drug entrapment was observed in 20 mg drug-loaded hydrogel and its swelling ratio was 115.5% in 28 d. Good hydrophilicity, good drug entrapment efficiency, and moderate drug release patterns of hydrogels can make them suitable for sustained drug release. The cytocompatibility of hydrogels was established by performing an MTT assay on the BHK-21 fibroblast cell line. The promising results have proved that hydrogels can be considered potential material for the slow release of anti-inflammatory drug at the target site in arthritis.

Influence of Nucleation on Relaxation, Molecular Cooperativity, and Physical Stability of Celecoxib Glass

Although nucleation is considered the first step in the crystallization of glass materials, the structure and properties of the nuclei are not understood well. Influence of nucleation on the structure and dynamics of celecoxib glass was evaluated in this study. The nuclei for Form III were induced by annealing the glass at freezing temperature, and their impact on the relaxation behavior was investigated using thermal analysis and broadband dielectric spectroscopy to find accelerated α relaxation and suppressed β relaxation. In addition, observed after nucleation was a decrease in cooperativity of the molecular motion, presumably because of the appearance of void spaces in the glass structure. During long-term isothermal crystallization studies, crystal growth to Form III was accelerated in the presence of the nuclei, whereas this effect was less remarkable when a different crystal form dominated the crystallization behavior. These observations should provide more detailed insights into the nucleation mechanism and impact of nucleation on molecular dynamics including physical stability of pharmaceutical glasses. In addition, discussed is the remarkable acceleration of the crystallization rate of the celecoxib glass just below its Tg, which could be understood by diffusionless crystal growth.

Overview and thermodynamic modelling of deep eutectic solvents as co-solvents to enhance drug solubilities in water

The poor water solubility of active pharmaceutical ingredients (APIs) is a major challenge in the pharmaceutical industry. Co-solvents are sometimes added to enhance drug dissolution. A novel group of co-solvents, the Deep Eutectic Solvents (DES), have gained interest in the pharmaceutical field due to their good solvent power, biodegradability, sustainability, non-toxicity, and low cost. In this study, we first provide an overview of all the literature solubility studies involving a drug or API + water + DES, which can be a valuable list to some researchers. Then, we analyze these systems with focus on each individual drug/API and provide statistical information on each. A similar analysis is carried out with focus on the individual DESs. An investigation of the numeric values of the water-solubility enhancement by the different DESs for various drugs indicates that DESs are indeed effective co-solvents, with varying degrees of solubility enhancement, even up to 15-fold. This is strongly encouraging, indicating the need for further studies to find the most promising DESs for solubility enhancement. However, time-consuming and costly trial and error should be prevented by first screening, using theoretical-based or thermodynamic-based models. Based on this conclusion, the second part of the study is concerned with investigating and suggesting accurate thermodynamic approaches to tackle the phase equilibrium modeling of such systems. For this purpose, a large data bank was collected, consisting of 2009 solubility data of 25 different drugs/APIs mixed with water and 31 different DESs as co-solvents at various DES concentrations, over wide ranges of temperatures at atmospheric pressure. This data bank includes 107 DES + water + drug/API systems in total. The solubility data were then modeled according to the solid-liquid equilibrium framework, using the local composition activity coefficient models of NRTL, and UNIQUAC. The results showed acceptable behavior with respect to the experimental values and trends for all of the investigated systems, with AARD% values of 9.65 % and 14.08 % for the NRTL and UNIQUAC models, respectively. In general, the lower errors of NRTL, as well as its simpler calculation process and the requirement of fewer component parameters, suggest the priority of NRTL over UNIQUAC for use in this field.

Challenges and Opportunities for Celecoxib Repurposing

Drug repositioning, also known as drug repurposing, reprofiling, or rediscovery, is considered to be one of the most promising strategies to accelerate the development of new original drug products. Multiple examples of successful rediscovery or therapeutic switching of old molecules that did not show clinical benefits or safety in initial trials encourage the following of the discovery of new therapeutic pathways for them. This review summarizes the efforts that have been made, mostly over the last decade, to identify new therapeutic targets for celecoxib. To achieve this goal, records gathered in MEDLINE PubMed and Scopus databases along with the registry of clinical trials by the US National Library of Medicine at the U.S. National Institutes of Health were explored. Since celecoxib is a non-steroidal anti-inflammatory drug that represents the class of selective COX-2 inhibitors (coxibs), its clinical potential in metronomic cancer therapy, the treatment of mental disorders, or infectious diseases has been discussed. In the end, the perspective of a formulator, facing various challenges related to unfavorable physicochemical properties of celecoxib upon the development of new oral dosage forms, long-acting injectables, and topical formulations, including the latest trends in the pharmaceutical technology, such as the application of mesoporous carriers, biodegradable microparticles, lipid-based nanosystems, or spanlastics, was presented.

Effect of Deep Eutectic System (DES) on Oral Bioavailability of Celecoxib: In Silico, In Vitro, and In Vivo Study

Different deep eutectic systems (DES) of choline chloride (CC)-urea (UA) (1:2), CC-glycerol (GLY) (1:2), CC-malonic acid (MA) (1:1), and CC-ascorbic acid (AA) (2:1) were generated and characterized by polarized light microscope (PLM) and Fourier transform infrared spectroscope (FTIR). The equilibrium solubility of celecoxib (CLX) in DES was compared to that in deionized water. The CC-MA (1:1) system provided ~10,000 times improvement in the solubility of CLX (13,114.75 µg/g) and was used for the generation of the CLX-DES system. The latter was characterized by PLM and FTIR to study the microstructure and intermolecular interaction between the CLX and CC-MA (1:1) DES. FTIR demonstrated the retention of the chemical structure of CLX. In vitro drug release studies in FaSSIF initially demonstrated high supersaturation, which decreased by ~2 fold after 2 h. Density functional theory (DFT)-based calculations provided a molecular-level understanding of enhanced solubility. Gibbs free energy calculations established the role of the strongest binding of CLX with CC and MA. A phase solubility study highlighted the role of hydrotropy-induced solubilization of the CLX-DES system. Animal pharmacokinetic studies established 2.76 times improvement in Cmax, 1.52 times reduction in tmax, and 1.81 times improvement in AUC0-∞. The overall results demonstrated the potential of developing a DES-based supersaturating drug-delivery system for pharmaceutical loading of drugs having solubility and dissolution rate-limited oral bioavailability.

Carrier-Free Inhalable Dry Microparticles of Celecoxib: Use of the Electrospraying Technique

Upregulation of cyclooxygenase (COX-2) plays an important role in lung cancer pathogenesis. Celecoxib (CLX), a selective COX-2 inhibitor, may have beneficial effects in COVID-19-induced inflammatory storms. The current study aimed to develop carrier-free inhalable CLX microparticles by electrospraying as a dry powder formulation for inhalation (DPI). CLX microparticles were prepared through an electrospraying method using a suitable solvent mixture at two different drug concentrations. The obtained powders were characterized in terms of their morphology, solid state, dissolution behavior, and aerosolization performance. Electrosprayed particles obtained from the ethanol-acetone solvent mixture with a drug concentration of 3 % w/v exhibited the best in vitro aerosolization properties. The value of the fine particle fraction obtained for the engineered drug particles was 12-fold higher than that of the untreated CLX. When the concentration of CLX was increased, a remarkable reduction in FPF was obtained. The smallest median mass aerodynamic diameter was obtained from the electrosprayed CLX at a 3% concentration (2.82 µm) compared to 5% (3.25 µm) and untreated CLX (4.18 µm). DSC and FTIR experiments showed no change in drug crystallinity or structure of the prepared powders during the electrospraying process. The findings of this study suggest that electrospraying has potential applications in the preparation of DPI formulations.

Enabling direct compression tablet formulation of celecoxib by simultaneously eliminating punch sticking, improving manufacturability, and enhancing dissolution through co-processing with a mesoporous carrier

The development of a high quality tablet of Celecoxib (CEL) is challenged by poor dissolution, poor flowability, and high punch sticking propensity of CEL. In this work, we demonstrate a particle engineering approach, by loading a solution of CEL in an organic solvent into a mesoporous carrier to form a coprocessed composite, to enable the development of tablet formulations up to 40% (w/w) of CEL loading with excellent flowability and tabletability, negligible punch sticking propensity, and a 3-fold increase in in vitro dissolution compared to a standard formulation of crystalline CEL. CEL is amorphous in the drug-carrier composite and remained physically stable after 6 months under accelerated stability conditions when the CEL loading in the composite was ≤ 20% (w/w). However, crystallization of CEL to different extents from the composites was observed under the same stability condition when CEL loading was 30-50% (w/w). The success with CEL encourages broader exploration of this particle engineering approach in enabling direct compression tablet formulations for other challenging active pharmaceutical ingredients.

Influence of formulation variables on the processability and properties of tablets manufactured by fused deposition modelling

The present work studied the influence of different formulation variables (defined also as factors), namely, different polymers (HPC EF, PVA and HPMC-AS LG), drugs with different water solubilities (paracetamol, hydrochlorothiazide and celecoxib) and drug loads (10 or 30 %) on their processability by HME and FDM. Both filaments and tablets were characterized for physic and chemical properties (DSC, XRPD, FTIR) and performance properties (drug content, in vitro drug release). Experiments were designed to highlight relationships between the 3 factors selected and the mechanical properties of filaments, tablet mass and dissolution profiles of the model drugs from printed tablets. While the combination of hydrochlorothiazide and HPMC-AS LG could not be extruded, the combination of paracetamol with HPC EF turned the filaments too ductile and not stiff enough hampering the process of printing. All other polymer and drug combinations could be successfully extruded and printed. Models reflected the influence of the solubility of the drug considered but not the drug load in formulations. The ranking of the drug release rates was in good agreement with their solubilities. Furthermore, PVA presenting the fastest swelling rate, promoted the fastest drugs' releases in comparison with the other polymers studied. Overall, the study enabled the identification of the key factors affecting the properties of printed tablets, with the proposal of a model that has valued the relative contribution of each factor to the overall performance of tablets.

Comparison of in vivo behaviors of intramuscularly long-acting celecoxib nanosuspensions with different particle sizes for the postoperative pain treatment

Celecoxib (CXB) has a good analgesic effect on postoperative acute pain, but clinically its compliance is compromised because of frequent administration. Therefore, the development of injectable celecoxib nanosuspensions (CXB-NS) for long-acting analgesic effects is highly desirable. However, how the particle size affects the in vivo behaviors of CXB-NS remains unclear. Herein, CXB-NS with different sizes were prepared by the wet-milling method. Following intramuscular (i.m.) injection in rats (50 mg/kg), all CXB-NS achieved sustained systemic exposure and long-acting analgesic effects. More importantly, CXB-NS showed size-dependent pharmacokinetic profiles and analgesic effects, and the smallest CXB-NS (about 0.5 μm) had the highest C_max, T_1/2, and AUC_0-240h and the strongest analgesic effects on incision pain. Therefore, small sizes are preferred for long action by i.m. injection, and the CXB-NS developed in this study were alternative formulations for the treatment of postoperative acute pain.

Novel mucoadhesive celecoxib-loaded cubosomal sponges: Anticancer potential and regulation of myeloid-derived suppressor cells in oral squamous cell carcinoma

Oral squamous-cell carcinoma (OSCC) is a widespread health problem. Myeloid-derived suppressor cells (MDSCs) are major tumor microenvironment (TME) population that govern many carcinogenesis aspects by establishing immunosuppressive milieu favoring tumor aggressiveness and treatment resistance. Cyclooxygenase-2 (COX-2) regulates MDSCs activity, hence, COX-2-selective inhibition by celecoxib (CXB) showed good anticancer effect at relatively high doses with possible subsequent cardiovascular complications. Therefore, targeted CXB delivery to MDSCs may represent a promising OSCC treatment strategy. Novel mucoadhesive-cubosomal buccal sponges were prepared for MDSCs targeting and were evaluated for their in-vitro quality attributes, ex-vivo mucoadhesion using buccal chicken-mucosa. Optimally-selected formulation showed considerable uptake by CD33⁺/11b⁺MDSCs in human OSCC cell-line (SCC-4) when quantitatively analyzed by flow-cytometry and examined using confocal-laser microscope. Optimum formulations loaded with low CXB doses (12 mg) were promoted to in-vivo studies via local application, using 4-nitroquinoline-1-oxide-induced OSCC in rats, and compared to their corresponding CXB gels. SP16 revealed the highest ability to decrease MDSC activation, recruitment and TME-immunosuppression in the isolated tumors. Consequently, SP16 exerted the greatest capacity to reduce histologic tumor grade, the OSCC-specific serum tumor markers levels, cancer hallmarks and stemness markers. CXB-loaded cubosomal sponges preferentially target MDSCs with noticeable anticancer potential and may exemplify novel mucoadhesive nanocarriers for OSCC treatment.

Macrophage-targeted mannose-decorated PLGA-vegetable oil hybrid nanoparticles loaded with anti-inflammatory agents

This work pledge to extend the therapeutic windows of hybrid nanoparticulate systems by engineering mannose-decorated hybrid nanoparticles based on poly lactic-co-glycolic acid (PLGA) and vegetable oil for efficient delivery of two lipophilic anti-inflammatory therapeutics (Celecoxib-CL and Indomethacin-IMC) to macrophages. The mannose surface modification of nanoparticles is achieved via O-palmitoyl-mannose spacer during the emulsification and nanoparticles assembly process. The impact of targeting motif on the hydrodynamic features (R_H, PdI), stability (ζ-potential), drug encapsulation efficiency (DEE) is thoroughly investigated. Besides, the in vitro biocompatibility (MTT, LDH) and susceptibility of mannose-decorated formulations to macrophage as well their immunomodulatory activity (ELISA) are also evaluated. The monomodal distributed mannose-decorated nanoparticles are in the range of nanometric size (R_H < 115 nm) with PdI < 0.20 and good encapsulation efficiency (DEE = 46.15% for CL and 76.20% for IMC). The quantitative investigation of macrophage uptake shows a 2-fold increase in fluorescence (RFU) of cells treated with mannose-decorated formulations as compared to non-decorated ones (p < 0.001) suggesting an enhanced cell uptake respectively improved macrophage targeting while the results of ELISA experiments suggest the potential immunomodulatory properties of the designed mannose-decorated hybrid formulations.

Transformation of nanoparticles into compacts: A study on PLGA and celecoxib nanoparticles

Oral delivery of nanoparticles possesses many advantages for delivery of active pharmaceutical ingredients (APIs) to the gastrointestinal tract. However, the poor physical stability of nanoparticles in liquid state is often a challenge. Removing water from the nanosuspensions and transforming the nanoparticles into solid particulate matter in the form of, e.g., tablets could be a potential approach to increase the stability of nanoparticles. The aim of this study was to transform nanoparticles into compacts and to investigate the redispersion of nanoparticles from compacts as well as the dissolution behavior of these compacts. DL-lactide-co-glycolide copolymer (PLGA) nanoparticles and celecoxib (CLX) nanoparticles were used as two model nanoparticle systems and fabricated into nano-embedded microparticles (NEMs) and subsequently compressed into compacts. The compacts were evaluated with respect to the redispersibility of the nanoparticles, as well as the dissolution characteristics of CLX. The results showed that the NEMs could be readily compressed into compacts with sufficient mechanical strength. The size of the redispersed PLGA nanoparticles from the compacts using 2-hydroxypropyl-β-cyclodextrin (HPβCD) as stabilizer was comparable to the original nanoparticles. In contrast, the redispersibility of CLX nanoparticles from the compacts was not as effective as for the PLGA nanoparticles evidenced by a significant increase in the size and polydispersity index (PDI) of the redispersed nanoparticles. Nonetheless, an obvious enhancement in dissolution rate of CLX was observed from the compacts with CLX nanoparticles. It is concluded that transforming polymeric nanoparticles into compacts via NEMs provides stabilization and allows redispersion into original nanoparticles. Despite the reduced redispersibility, compacts loaded with nanoparticles exhibited improved dissolution rate compared with the crystalline drug. Loading of nanoparticles into compacts is a promising approach to overcome the poor stability of nanoparticle within oral drug delivery of nanoparticles.

Thermodynamic solubility of celecoxib in organic solvents

This work investigates the solubility of the stable polymorph of celecoxib (CEL) drug in a range of pure organic solvents, including methanol, isopropanol, butanol, ethyl acetate, acetonitrile, and toluene, within the temperature range 278–303 K.

Impact of Hydroxypropyl Methylcellulose Acetate Succinate Critical Aggregation Concentration on Celecoxib Supersaturation

Polymers play an important role in amorphous solid dispersions (ASDs), enhancing stability in the solid state and maintaining supersaturation in aqueous solutions of intrinsically low-water-soluble drug candidates. Hydroxypropyl methylcellulose acetate succinate (HPMCAS) is widely used in ASDs due to its hydrophobic/hydrophilic balance and ionizability of the substituent functionalities. While colloid formation of HPMCAS in solution due to this hydrophobic/hydrophilic balance has been studied, the impact of the polymer conformation (random coil vs aggregated) on drug supersaturation of ASDs is not well understood. To our knowledge, this is the first report where the critical aggregation concentration for three grades of HPMCAS (HF/MF/LF) has been determined via fluorescence spectroscopy using the environment-sensitive probe pyrene. The specific impact of polymer conformation (random coil vs aggregate) on the model drug celecoxib (CLX) has been elucidated with fluorescence quenching and nuclear magnetic resonance (NMR) spectroscopy. A negative deviation of the Stern-Volmer plot indicated that aggregated HPMCAS effectively blocked the quencher's access to CLX. This is further supported by NMR observations, where NMR spectra indicate a larger change of chemical shift of the -NH group of CLX when HPMCAS is above its aggregated concentration, suggesting strong H-bonding interactions between aggregated HPMCAS and CLX. Finally, the supersaturation-precipitation study shows that all three grades of HPMCAS in the aggregated state significantly enhanced CLX supersaturation compared to the nonaggregated state, indicating that polymer aggregation plays a critical role in maintaining drug supersaturation.

3D-Printed Mesoporous Carrier System for Delivery of Poorly Soluble Drugs

Fused deposition modelling (FDM) is the most extensively employed 3D-printing technique used in pharmaceutical applications, and offers fast and facile formulation development of personalized dosage forms. In the present study, mesoporous materials were incorporated into a thermoplastic filament produced via hot-melt extrusion and used to produce oral dosage forms via FDM. Mesoporous materials are known to be highly effective for the amorphization and stabilization of poorly soluble drugs, and were therefore studied in order to determine their ability to enhance the drug-release properties in 3D-printed tablets. Celecoxib was selected as the model poorly soluble drug, and was loaded into mesoporous silica (MCM-41) or mesoporous magnesium carbonate. In vitro drug release tests showed that the printed tablets produced up to 3.6 and 1.5 times higher drug concentrations, and up to 4.4 and 1.9 times higher release percentages, compared to the crystalline drug or the corresponding plain drug-loaded mesoporous materials, respectively. This novel approach utilizing drug-loaded mesoporous materials in a printed tablet via FDM shows great promise in achieving personalized oral dosage forms for poorly soluble drugs.

The effect of some acrylic polymers on dissolution of celecoxib solid dispersion formulations

OBJECTIVE

The purpose of the present study was firstly to identify the effectiveness of Eudragit® polymers (Eudragit^® RL, RS, L100-55, L100, S100 and E100) in inhibition of celecoxib precipitation from buffer solutions (pH = 6.8). Furthermore, the influence of Eudragit^® polymers on non-sink dissolution behavior of celecoxib from solid dispersions was investigated.

METHODS

Solid dispersions were prepared by the rotary evaporation method. In vitro dissolution studies, FT-IR and differential scanning calorimetry were employed to characterize the formulations.

RESULTS

The results revealed that Eudragit^® E100, L100 and S100 inhibited precipitation of celecoxib efficiently. It is understood that crystallization during the dissolution of solid dispersions could happen through crystallization from solid matrix following contact with the dissolution medium or from the supersaturated solution produced following dissolution. The supersaturated drug concentrations attained from the dissolution of Eudragit^®-celecoxib solid dispersions were almost similar, suggesting that crystallization from solid matrix did not occur readily. However, only solid dispersions containing efficient crystallization inhibitor polymers were able to maintain the supersaturated solution up to the end of the dissolution run.

CONCLUSION

Results revealed that the principal mechanism of attaining supersaturated solution of celecoxib from solid dispersions was related to crystallization inhibition from solution not from solid matrix.

Utilizing Laser Activation of Photothermal Plasmonic Nanoparticles to Induce On-Demand Drug Amorphization inside a Tablet

Poor aqueous drug solubility represents a major challenge in oral drug delivery. A novel approach to overcome this challenge is drug amorphization inside a tablet, that is, on-demand drug amorphization. The amorphous form is a thermodynamically instable, disordered solid-state with increased dissolution rate and solubility compared to its crystalline counterpart. During on-demand drug amorphization, the drug molecularly disperses into a polymer to form an amorphous solid at elevated temperatures inside a tablet. This study investigates, for the first time, the utilization of photothermal plasmonic nanoparticles for on-demand drug amorphization as a new pharmaceutical application. For this, near-IR photothermal plasmonic nanoparticles were tableted together with a crystalline drug (celecoxib) and a polymer (polyvinylpyrrolidone). The tablets were subjected to a near-IR laser at different intensities and durations to study the rate of drug amorphization under each condition. During laser irradiation, the plasmonic nanoparticles homogeneously heated the tablet. The temperature was directly related to the rate and degree of amorphization. Exposure times as low as 180 s at 1.12 W cm^-2 laser intensity with only 0.25 wt % plasmonic nanoparticles and up to 50 wt % drug load resulted in complete drug amorphization. Therefore, near-IR photothermal plasmonic nanoparticles are promising excipients for on-demand drug amorphization with laser irradiation.

Nano wet milled celecoxib extended release microparticles for local management of chronic inflammation

Osteoarthritis (OA), the most common form of arthritis, is characterized by chronic inflammation, degeneration of articular cartilage and whole joints. Local delivery by intra-articular (IA) injection of small molecules is an established treatment to relieve pain and improve joint motion, requiring month-lasting release of therapeutic drug doses. We incorporated anti-inflammatory drug celecoxib in poly (D, L-lactic acid) microparticles using two spray-drying approaches - either as a solid drug solution or embedded as milled nano drug. Differential scanning calorimetry, X-ray powder diffraction, electron microscopy and in vitro drug release allowed comparison of the microparticles. Both types resulted in spherical particles ranging from 20 to 40 μm mean size, with high drug loadings (10% to 50% w/w) and entrapment efficiencies > 80%. However, after 90 days, in vitro celecoxib release from nano drug embedded microparticles presented a significantly slower release in comparison to drug in solution microparticles, attributed to the presence of stabilized amorphous drug. No cytotoxicity was observed in human articular synoviocytes and PGE₂ release was fully suppressed at low doses of both microparticulate systems. This study provides techniques to release high drug loads over months in a tunable manner, providing valuable options for the IA management of osteoarthritis.

Preparation and Evaluation of Eudragit L100-PEG Proliponiosomes for Enhanced Oral Delivery of Celecoxib

PEGylated Eudragit L100 (ELP)-containing proliponiosomes (PLNs) were developed for improved oral delivery of celecoxib (CXB). The successful introduction of PEG 2000 or 5000 to Eudragit L100 (EL) was confirmed via proton nuclear magnetic resonance analysis of which calculated molar substitution ratio of PEG to EL was 36.0 or 36.7, respectively. CXB, ELP, phospholipid, and non-ionic surfactants were dissolved in dimethyl sulfoxide and lyophilized to produce CXB-loaded PLNs (CXB@PLNs). The physical state of CXB@PLNs was evaluated using differential scanning calorimetry and powder X-ray diffractometry, which revealed that crystalline CXB was transformed into amorphous form after the fabrication procedure. The reconstitution of CXB@PLNs in aqueous media generated CXB-loaded liponiosomes with nano-sized mean diameters and spherical morphology. CXB@PLNs displayed enhanced dissolution rate and permeability compared to CXB suspension. In vivo pharmacokinetic studies performed on rats demonstrated the improved oral bioavailability of CXB@PLNs compared to that of CXB suspension. No serious systemic toxicity was observed in the blood biochemistry tests performed on rats. These results suggest that the developed PLNs could be promising oral delivery systems for improving the bioavailability of poorly water-soluble drugs, such as CXB.

Formulation and In Vitro Evaluation of Casein Nanoparticles as Carrier for Celecoxib

Purpose: The objective of this work was to formulate casein (CAS) nanocarriers for the dissolution enhancement of poorly water soluble drug celecoxib (CLXB).

Methods: The CLXB loaded CAS nanocarriers viz., nanoparticles, reassembled CAS micelles and nanocapsules were prepared using sodium caseinate (SOD-CAS) as a carrier to enhance the solubility of CLXB. The prepared formulations were characterized for particle size, polydispersity index, zeta potential, percentage entrapment efficiency, and surface morphology for the selection of best formulation. Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction study was used to for the confirmation of encapsulation of CLXB. Further,in vitro drug dissolution, ex-vivo permeation studies on chicken ileum and stability studies were carried out.

Results: The CLXB loaded casein nanoparticles (CNP) (batch A2) showed a particle size diameter 216.1 nm, polydispersity index 0.422 with percentage entrapment efficiency of 90.71% and zeta potential of -24.6 mV. Scanning electron microscopy of suspension confirmed globular shape of CNP. Thein vitro release data of optimized batch followed non Fickian diffusion mechanism. The ex vivo permeation studies on chicken ileum of CLXB loaded CNP showed permeation through mucous membrane as compared to pure CLXB. The apparent permeability of best selected freeze dried CLXB loaded CNP (batch A2) was higher and gradually increased from 0.90 mg/cm² after 10 min to a maximum of 1.95 mg/cm² over the subsequent 90 min. A higher permeation was recorded at each time point than that of the pure CLXB.

Conclusion: The study explored the potential of CAS as a carrier for solubility enhancement of poorly water soluble drugs.

Intermolecular interactions and disorder in six isostructural celecoxib solvates

Six isostructural crystalline solvates of the active pharmaceutical ingredient celecoxib {4-[5-(4-methylphenyl)-3-(trifluoromethyl)pyrazol-1-yl]benzenesulfonamide; C17H14F3N3O2S} are described, containing dimethylformamide (DMF, C3H7NO, 1), dimethylacetamide (DMA, C4H9NO, 2), N-methylpyrrolidin-2-one (NMP, C5H9NO, 3), tetramethylurea (TMU, C5H12N2O, 4), 1,3-dimethyl-3,4,5,6-tetrahydropyrimidin-2(1H)-one (DMPU, C6H12N2O, 5) or dimethyl sulfoxide (DMSO, C2H6OS, 6). The host celecoxib structure contains one-dimensional channel voids accommodating the solvent molecules, which accept hydrogen bonds from the NH2 groups of two celecoxib molecules. The solvent binding sites have local twofold rotation symmetry, which is consistent with the point symmetry of the solvent molecule in 4 and 5, but introduces orientational disorder for the solvent molecules in 1, 2, 3 and 6. Despite the isostructurality of 1-6, the unit-cell volume and solvent-accessible void space show significant variation. In particular, 4 and 5 show an enlarged and skewed unit cell, which can be attributed to a specific interaction between an N-CH3 group in the solvent molecule and the toluene group of celecoxib. Intermolecular interaction energies calculated using the PIXEL method show that the total interaction energy between the celecoxib and solvent molecules is broadly correlated with the molecular volume of the solvent, except in 6, where the increased polarity of the S=O bond leads to greater overall stabilization compared to the similarly-sized DMF molecule in 1. In the structures showing disorder, the most stable orientations of the solvent molecules make C-H...O contacts to the S=O groups of celecoxib.

The influence of drug and polymer particle size on the in situ amorphization using microwave irradiation

In this study, the impact of drug and polymer particle size on the in situ amorphization using microwave irradiation at a frequency of 2.45 GHz were investigated. Using ball milling and sieve fractioning, the crystalline drug celecoxib (CCX) and the polymer polyvinylpyrrolidone (PVP) were divided into two particle size fractions, i.e. small (<71 µm) and large (>71 µm) particles. Subsequently, compacts containing a drug load of 30% (w/w) crystalline CCX in PVP were prepared and subjected to microwave radiation for an accumulated duration of 600 sec in intervals of 60 sec as well as continuously for 600 sec. It was found that the compacts containing small CCX particles displayed faster rates of amorphization and a higher degree of amorphization during microwave irradiation as compared to the compacts containing large CCX particles. For compacts with small CCX particles, interval exposure to microwave radiation resulted in a maximum degree of amorphization of 24%, whilst a fully amorphous solid dispersion (100%) was achieved after 600 sec of continuous exposure to microwave radiation. By monitoring the temperature in the core of the compacts during exposure to microwave radiation using a fiber optic temperature probe, it was found that the total exposure time above the glass transition temperature (T_g) was shorter for the interval exposure method compared to continuous exposure to microwave radiation. Therefore, it is proposed that the in situ formation of an amorphous solid dispersion is governed by the dissolution of drug into the polymer, which most likely is accelerated above the T_g of the compacts. Hence, prolonging the exposure time above the T_g, and increasing the surface area of the drug by particle size reduction will increase the dissolution rate and thus, rate and degree of amorphization of CCX during exposure to microwave radiation.

A journey of celecoxib from pain to cancer

The most enthralling and versatile class of drugs called the Non-steroidal anti-inflammatory (NSAIDs) showed its therapeutic utility in inflammation, beginning from the era of classic drug 'Aspirin'. NSAIDs and their well-established action based on inhibiting the COX-1 and COX-2 enzyme leads to blockage of prostaglandin pathway. They further categorized into first generation (non-selective inhibitor) and second generation (selective COX-2 inhibitors). Selective COX-2 inhibitors has advantage over non-selective in terms of their improved safety profile of gastro-intestinal tract. Rejuvenating and recent avenues for COXIBS (selective COX-2 inhibitors) explains its integrated role in identification of biochemical pain signaling as well as its pivotal key role in cancer chemotherapy. A key role player in this class is the Celecoxib (only FDA approved COXIB) a member of Biopharmaceutical classification system (BCS) II. Low solubility and bioavailability issues related with celecoxib lead to the development and advancement in the discovery and research of some possible formulation administered either orally, topically or via transdermal route. This review article intent to draw the bead on Celecoxib and it clearly explain extensive knowledge of its disposition profile, its dynamic role in cancer at cellular level and cardiovascular risk assessment. Some of the possible formulations approaches with celecoxib and its improvement aspects are also briefly discussed.

Preparation, Pre-clinical and Clinical Evaluation of a Novel Rapidly Absorbed Celecoxib Formulation

Celecoxib (Celebrex®) is the only widely used NSAID that selectively inhibits the COX-2 isoenzyme. Celebrex® is absorbed slowly in the fasted state and food intake further delays absorption. In this work, an amorphous water dispersible granule formulation of celecoxib is described with in vitro characterization, preclinical and clinical data. The formulation exhibited very high passive permeability and apparent solubility, significantly outperforming the micronized celecoxib and the drug product Celebrex®. The granule formulation remained stable for at least 1 year in stability tests. In dog studies, t_max was 1 h with over 50% of C_max reached within 15 min regardless of food intake. A phase 1 clinical trial was conducted with 12 volunteers at 100- and 200-mg doses. Celecoxib plasma concentrations reached 250 ng/ml, the effective therapeutic plasma level, in less than 15 min regardless of food or dose. The novel celecoxib formulation is rapidly absorbed, demonstrating the potential utility as an acute treatment offering advantages over the currently marketed product.

Adsorption of Celecoxib on B12N12 fullerene: Spectroscopic and DFT/TD-DFT study

In this study, we evaluated the effect of the Celecoxib (CXB) adsorption on the electronic and optical properties of B₁₂N₁₂ fullerene by using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations with the M06-2X functional and the 6-311+G** basis set. The calculated adsorption energies of CXB with the B₁₂N₁₂ fullerene was evaluated at T = 298.15 K in the vacuum and solvent (water) environments with the M06-2X functional. UV absorption and IR spectra were calculated and studied in order to identify the most important changes happening as a consequence of interactions between CXB and B₁₂N₁₂ fullerene. The results revealed that the adsorption of the CXB molecule from its NH₂ head on the B₁₂N₁₂ is more favorable than those of the SO₂ and NH groups in the gas and solvent environments. It is anticipated that the applied B₁₂N₁₂ fullerene could be suitable as a biomedical carrier for the delivery of CXB drug.

Development and Evaluation of a Reconstitutable Dry Suspension to Improve the Dissolution and Oral Absorption of Poorly Water-Soluble Celecoxib

This study aims at developing and evaluating reconstitutable dry suspension (RDS) improved for dissolution rate, oral absorption, and convenience of use of poorly water-soluble celecoxib (CXB). Micro-sized CXB particle was used to manufacture nanosuspension by using bead milling and then RDS was made by spray-drying the nanosuspension with effective resuspension agent, dextrin. The redispersibility, morphology, particle size, crystallinity, stability, dissolution, and pharmacokinetic profile of the RDS were evaluated. RDS was effectively reconstituted into nanoparticles in 775.8 ± 11.6 nm. It was confirmed that CXB particles are reduced into needle-shape ones in size after the bead-milling process, and the description of CXB was the same in the reconstituted suspension. Through the CXB crystallinity study using differential scanning calorimetry (DSC) and XRD analysis, it was identified that CXB has the CXB active pharmaceutical ingredient (API)’s original crystallinity after the bead milling and spray-drying process. In vitro dissolution of RDS was higher than that of CXB powder (93% versus 28% dissolution at 30 min). Furthermore, RDS formulation resulted in 5.7 and 6.3-fold higher area under the curve (AUC_∞) and peak concentration (C_max) of CXB compared to after oral administration of CXB powder in rats. Collectively, our results suggest that the RDS may be a potential oral dosage formulation for CXB to improve its bioavailability and patient compliance.

In vivo pharmacokinetics of celecoxib loaded endcapped PCLA-PEG-PCLA thermogels in rats after subcutaneous administration

Injectable thermogels based on poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) (PCLA-PEG-PCLA) containing an acetyl- or propyl endcap and loaded with celecoxib were developed for local drug release. The aim of this study was to determine the effects of the composition of the celecoxib/PCLA-PEG-PCLA formulation on their in vivo drug release characteristics. Furthermore, we want to obtain insight into the in vitro-in vivo correlation. Different formulations were injected subcutaneously in rats and blood samples were taken for a period of 8 weeks. Celecoxib half-life in blood increased from 5 h for the bolus injection of celecoxib to more than 10 days for the slowest releasing gel formulation. Sustained release of celecoxib was obtained for at least 8 weeks after subcutaneous administration. The release period was prolonged from 3 to 6-8 weeks by increasing the injected volume from 100 to 500 µL, which also led to higher serum concentrations in time. Propyl endcapping of the polymer also led to a prolonged release compared to the acetyl endcapped polymer (49 versus 21 days) and at equal injected dose of the drug in lower serum concentrations. Increasing the celecoxib loading from 10 mg/mL to 50 mg/mL surprisingly led to prolonged release (28 versus 56 days) as well as higher serum concentrations per time point, even when corrected for the higher dose applied. The in vivo release was about twice as fast compared to the in vitro release for all formulations. Imaging of organs of mice, harvested 15 weeks after subcutaneous injection with polymer solution loaded with infrared-780 labelled dye showed no accumulation in any of these harvested organs except for traces in the kidneys, indicating renal clearance. Due to its simplicity and versatility, this drug delivery system has great potential for designing an injectable to locally treat osteoarthritis, and to enable tuning the gel to meet patient-specific needs.

Silver-choline chloride modified graphene oxide: Novel nano-bioelectrochemical sensor for celecoxib detection and CCD-RSM model

In this study, silver nanoparticles modified choline chloride functionalized graphene oxide (AgNPs-ChCl-GO) was synthesized using sonochemical method and utilized as a bioelectrochemical sensor for detection of celecoxib (CEL). The characterization studies were ultimately performed in order to acheive a more complete understanding of the morphological and structural features of the AgNPs-ChCl-GO using different techniques including FT-IR, AFM, FE-SEM, EDX, and XRD. AgNPs-ChCl-GO demonstrated a significant improvement in the reduction activity of CEL due to the enhancement in the current response compared to the bare carbon paste electrode (CPE). The optimum experimental conditions, were optimized using central composite design (CCD) methodology. The differential pulse voltammetry (DPVs) showed an expanded linear dynamic ranges of 9.6 × 10^-9-7.4 × 10^-7 M for celecoxib in Britton-Robinson buffer in pH 5.0 with. LOD (S/N = 3) and LOQ (S/N = 10) were obtained 2.51 × 10^-9 M and 6.58 × 10^-9 M respectively. AgNPs-ChCl-GO-carbon paste electrode exhibited suitable properties and high accuracy determination of celecoxib in the human plasma sample.

Merits and Limitations of Dynamic Vapor Sorption Studies on the Morphology and Physicochemical State of Freeze-Dried Products

The goal of the present study was to assess the applicability of dynamic vapor sorption analysis of freeze-dried products. Water vapor sorption profiles of intact and ground cakes were recorded to determine the relevance of powder handling. Grinding prior to measurements appeared to be related with a more rapid uptake of water vapor and crystallization. Crystallization may be prevented when analyzing intact cakes. More hygroscopic materials appeared to require a longer time to achieve a constant mass. The specific surface area of different freeze-dried products was calculated from the sorption isotherms using water, organic solvents, and krypton. The specific surface areas calculated for mannitol with water and ethanol was in good agreement with krypton data. False high values were obtained from water vapor sorption of the investigated amorphous materials. The results were slightly improved by the application of vacuum. For trehalose and sucrose, no sorption and thus faulty results were detected with the studied organic solvents. The degree of crystallinity of mannitol within a binary formulation could not be determined by dynamic vapor sorption. Differences in sorption and crystallization tendencies of mannitol and sucrose that were freeze-dried separately and in a binary mixture were considered as the root cause.