Rheological studies of the gelation of deacetylated gellan gum (Gelrite) in physiological conditions

Superlubricity Achieved by a Transparent Poly(vinylpyrrolidone) Composite Hydrogel with Glycerol Ethoxylate in Ocular Conditions

Efficient and stable ocular lubrication is pivotal in safeguarding eye tissues from wear, especially under repetitive strain due to frequent blinking. Hydrogels have been reported to possess adjustable mechanical properties, biocompatibility, durability, and elevated water content and extensive utilization in medical fields. In this work, a kind of visible photo-cross-linking poly(vinylpyrrolidone) (PVP) hydrogel was designed and synthesized using 1-vinyl-2-pyrrolidone (NVP) and poly(ethylene glycol) diacrylate (PEGDA). To optimize the structure and improve the lubrication performance of hydrogels, we prepared and investigated glycerol ethoxylate (GE)-introduced composite hydrogels (GE/PVP). The results show that the addition of 3 wt % GE helped the hydrogel to form a uniform and dense porous matrix and reduce the frictional coefficient (COF) by over 50%, achieving superlubricity (COF ≈ 0.005). However, with the excessive increase of GE (6 wt %), the structure of the hydrogel is destroyed, inducing pore walls to thin and expand. After that, a lubrication mechanism of the GE/PVP composite hydrogel was proposed, in which the addition of GE reduced the surface tension of the hydrogel, enhanced the hydration ability of the hydrogel, and thus decreased the friction between sliding surfaces. Besides, the cytotoxicity tests show that the composite hydrogels possess good biocompatibility. Overall, the as-synthesized hydrogels hold great potential as lubricating medium for use in ocular applications.

Thermosensitive Triblock Copolymer for Slow-Release Lubricants under Ocular Conditions

The ocular environment is crucial for a biological lubrication system. An unstable condition of tear film may cause a series of ocular diseases due to serious friction, such as dry eye syndrome, which has drawn extensive attention nowadays. In this study, an in vitro biocompatible superlubricity system, containing thermogelling copolymers (PCGA-PEG-PCGA) and slow-release lubricant (PEG 300/Tween 80), was constructed. First, the sol-gel transition temperature and gel strength of PCGA-PEG-PCGA were adjusted based on the ocular environment by regulating the length of PCGA blocks. Furthermore, the copolymer hydrogel exhibited a reliable slow-release property within 10 days and showed low cytotoxicity. Then, the superlubricity (coefficient of friction of approximately 0.005) was achieved with its released PEG 300/Tween 80 aqueous solution at the sliding velocity range of 1-100 mm s-1 and pressure range of 10-22 kPa. However, the lubrication behaviors varied, while PEG 300 chains and Tween 80 micelles were demonstrated to form a multilayer and a single layer adsorption structure on the sliding surface, respectively. On the whole, the composite lubrication systems, especially the one composed of Tween 80, showed excellent tribological properties owing to the stable slow-release and full hydration effects under ocular conditions, which hold great potential for improving ocular lubrication and maintaining human visual health.

Evaluation of bioadhesive gels for local action in the esophagus

Direct drug administration to the esophagus faces several obstacles, including continuous salivary dilution and removal of the dosage form from the tissue surface due to esophageal peristalsis. These actions often result in short exposure times and reduced concentrations of drug at the esophageal surface, providing limited opportunities for drug absorption into or across the esophageal mucosa. A variety of bioadhesive polymers were investigated for their ability to resist removal by salivary washings using an ex vivo porcine esophageal tissue model. Hydroxypropylmethylcellulose and carboxymethylcellulose both have reported bioadhesive properties, but neither was able to withstand repeated exposure to saliva, and the gels formulated with these polymers were quickly removed from the esophageal surface. Two polyacrylic polymers, carbomer and polycarbophil, also showed limited esophageal surface retention when exposed to salivary washing, likely due to the ionic composition of saliva affecting the inter-polymer interactions necessary for these polymers to maintain their increased viscosities. In situ gel forming polysaccharide gels (ion-triggered), including xanthan gum, gellan gum, and sodium alginate, showed superior tissue surface retention, and formulations containing these bioadhesive polymers along with ciclesonide, an anti-inflammatory soft prodrug, were investigated as potential, locally-acting esophageal delivery systems. Exposure of a segment of esophagus to the ciclesonide-containing gels resulted in therapeutic concentrations of des-ciclesonide, the active drug metabolite, in the tissues within 30 min. Increasing des-CIC concentrations were also observed over a 3-hour exposure interval suggesting continued release and absorption of ciclesonide into the esophageal tissues. These results demonstrate the ability to achieve therapeutic drug concentrations in the esophageal tissues using in situ gel-forming bioadhesive polymer delivery systems, and these systems provide promising opportunities for the local treatment of esophageal disease.

Interpenetrating polymeric network (IPNs) in ophthalmic drug delivery: Breaking the barriers

To maintain the therapeutic drug concentration for a prolonged period of time in aqueous and vitreous humor is primary challenge for ophthalmic drug delivery. Majority of the locally administered drug into the eye is lost as to natural reflexes like blinking and lacrimation resulting in the short span of drug residence. Consequently, less than 5% of the applied drug penetrate through the cornea and reaches the intraocular tissues. The major targets for optimal ophthalmic drug delivery are increasing drug residence time in cul-de-sac of the eye, prolonging intraocular exposure, modulating drug release from the delivery system, and minimizing pre-corneal drug loss. Development of in situ gel, contact lens, intraocular lens, inserts, artificial cornea, scaffold, etc., for ophthalmic drug delivery are few approaches to achieve these major targeted objectives for delivering the drug optimally. Interpenetrating polymeric network (IPN) or smart hydrogels or stimuli sensitive hydrogels are the class of polymers that can help to achieve the targets in ophthalmic drug delivery due to their versatility, biocompatibility and biodegradability. These novel ''smart" materials can alter their molecular configuration and result in volume phase transition in response to environmental stimuli, such as temperature, pH, ionic strength, electric and magnetic field. Hydrogel and tissue interaction, mechanical/tensile properties, pore size and surface chemistry of IPNs can also be modulated for tuning the drug release kinetics. Stimuli sensitive IPNs has been widely exploited to prepare in situ gelling formulations for ophthalmic drug delivery. Low refractive index hydrogel biomaterials with high water content, soft tissue-like physical properties, wettability, oxygen, glucose permeability and desired biocompatibility makes IPNs versatile candidate for contact lenses and corneal implants. This review article focuses on the exploration of these smart polymeric networks/IPNs for therapeutically improved ophthalmic drug delivery that has unfastened novel arenas in ophthalmic drug delivery.

Long-acting formulation strategies for protein and peptide delivery in the treatment of PSED

The invigoration of protein and peptides in serious eye disease includes age-related macular degeneration, choroidal neovascularization, retinal neovascularization, and diabetic retinopathy. The transportation of macromolecules like aptamers, recombinant proteins, and monoclonal antibodies to the posterior segment of the eye is challenging due to their high molecular weight, rapid degradation, and low solubility. Moreover, it requires frequent administration for prolonged therapy. The long-acting novel formulation strategies are helpful to overcome these issues and provide superior therapy. It avoids frequent administration, improves stability, high retention time, and avoids burst release. This review briefly enlightens posterior segments of eye diseases with their diagnosis techniques and treatments. This article mainly focuses on recent advanced approaches like intravitreal implants and injectables, electrospun injectables, 3D printed drug-loaded implants, nanostructure thin-film polymer devices encapsulated cell technology-based intravitreal implants, injectable and depots, microneedles, PDS with ranibizumab, polymer nanoparticles, inorganic nanoparticles, hydrogels and microparticles for delivering macromolecules in the eye for intended therapy. Furthermore, novel techniques like aptamer, small Interference RNA, and stem cell therapy were also discussed. It is predicted that these systems will make revolutionary changes in treating posterior segment eye diseases in future.

Temperature-Ion-pH Triple Responsive Gellan Gum as In Situ Hydrogel for Long-Acting Cancer Treatment

Background: Promising cancer chemotherapy requires the development of suitable drug delivery systems (DDSs). Previous research has indicated that a hydrogel is a powerful DDS for tumor therapy and holds great potential to offer a feasible method for cancer management. Methods: In this study, glutathione-gellan gum conjugate (GSH-GG) was synthesized through chemical reaction. Doxorubicin hydrochloride (DOX) was loaded into GSH-GG to accomplish DOX-loaded GSH-GG. The properties, injectability, drug release, and in vitro and in vivo anticancer effects of DOX-loaded GSH-GG were tested. Results: DOX-loaded GSH-GG showed a temperature-ion dual responsive gelling property with good viscosity, strength, and injectability at an optimized gel concentration of 1.5%. In addition, lower drug release was found under acidic conditions, offering beneficial long-acting drug release in the tumor microenvironment. DOX-loaded GSH-GG presented selective action by exerting substantially higher cytotoxicity on cancer cells (4T1) than on normal epithelial cells (L929), signifying the potential of complete inhibition of tumor progression, without affecting the health quality of the subjects. Conclusions: GSH-GG can be applied as a responsive gelling material for delivering DOX for promising cancer therapy.

Ciprofloxacin-Loaded Zein/Hyaluronic Acid Nanoparticles for Ocular Mucosa Delivery

Bacterial conjunctivitis is a worldwide problem that, if untreated, can lead to severe complications, such as visual impairment and blindness. Topical administration of ciprofloxacin is one of the most common treatments for this infection; however, topical therapeutic delivery to the eye is quite challenging. To tackle this, nanomedicine presents several advantages compared to conventional ophthalmic dosage forms. Herein, the flash nanoprecipitation technique was applied to produce zein and hyaluronic acid nanoparticles loaded with ciprofloxacin (ZeinCPX_HA NPs). ZeinCPX_HA NPs exhibited a hydrodynamic diameter of <200 nm and polydispersity index of <0.3, suitable for ocular drug delivery. In addition, the freeze-drying of the nanoparticles was achieved by using mannitol as a cryoprotectant, allowing their resuspension in water without modifying the physicochemical properties. Moreover, the biocompatibility of nanoparticles was confirmed by in vitro assays. Furthermore, a high encapsulation efficiency was achieved, and a release profile with an initial burst was followed by a prolonged release of ciprofloxacin up to 24 h. Overall, the obtained results suggest ZeinCPX_HA NPs as an alternative to the common topical dosage forms available on the market to treat conjunctivitis.

Preparation of a novel tacrolimus ion sensitive ocular in situ gel and in vivo evaluation of curative effect of immune conjunctivitis

BACKGROUND

The aim of this study was to formulate a novel TAC preparation into an in situ gel for ocular drug delivery, in order to prolong the residence time on mucosal surfaces and increase patient compliance.

METHODS

The optimal formulation was characterized by surface morphology, gelling capacity, viscosity, stability and in vitro release. In vivo studies were also conducted to evaluate the precorneal retention and pharmacodynamic results.

RESULTS

In this study, the TAC in situ gel can be prepared by a simple solvent stirring method, and the optimized formulation exhibited good stability within 3 months. During storage, the initial viscosity of the formula had little change. The results of viscosity measurement showed that TAC in situ gel was typical of pseudo plastic systems and exhibited a marked increase in viscosity stimulated with STF. In vitro and in vivo studies illustrated that TAC in situ gel administration facilitated the retention and sustained release of TAC.

CONCLUSIONS

TAC combined with in situ gelling agents demonstrates an efficient topical drug delivery platform.

Development of Tamoxifen In Situ Gel Nanoemulsion for Ocular Delivery in Photoreceptor Degeneration Disorder: In Vitro Characterization, 131I-Radiolabeling, and In Vivo Biodistribution Studies

Purpose

The aim of our work is to develop an in situ ocular gellan gum–based nanoemulsion (NE) of tamoxifen TAM as an alternative drug delivery system to the oral route for the treatment of photoreceptor degeneration disorder.

Method

Six pseudoternary phase diagrams were developed using oil (oleic acid), surfactants (Tween 80 or Tween 20), a co-surfactant (polyethylene glycol 400), and water. The particle size, polydispersity index, and zeta potential of the developed systems were all measured. The safety of ocular application of the optimum system was established via in vivo histopathological investigation. To track the biodistribution of the optimum gel, iodine-131 (131I) was incorporated into the gel via coupling with TAM via direct electrophilic substitution reaction.

Results

Based on the obtained results, TAMNE-1 was chosen as the optimal system, with PS = 140.20 ± 1.50 nm, ZP =  − 27.86 ± 1.13 mV, and PDI = 0.20 ± 0.00%. In vitro release displayed a prolonged and sustained release of TAMNE-1 gel compared to TAM solution (plain eye drop). Transparent in situ TAMNE-1 gel was developed after the incorporation of the TAMNE-1 system into gellan gum aqueous solution (0.3% w/w). In this study, TAM was successfully radiolabeled with 131I for subsequent evaluation of the efficacy of the developed in situ gel system (TAMNE-1 gel) in vivo. The developed TAMNE-1 gel system was nonirritant and safe and the biodistribution studies showed better retention of TAMNE-1 gel than plain TAM eye drops.

Conclusion

The developed TAMNE-1 gel is able to enhance the ocular bioavailability of TAM and can go further with clinical evaluation.

Graphic Abstract

Nanoparticles Loaded Thermoresponsive In Situ Gel for Ocular Antibiotic Delivery against Bacterial Keratitis

Antibiotics delivered through conventional dosage against ophthalmic infections show lower therapeutic efficacy due to their low residence time. Therefore, there is a great need to design and develop novel dosage forms that would increase the ocular residence time of antibiotics at the site of infection. This study describes the development of nanoparticles laden in situ gelling solution, intended to sustain antibiotic release for improved therapeutic efficiency. Oxytetracycline-loaded gelatin-polyacrylic acid nanoparticles were prepared and incorporated in poloxamer-N407 solution. The rheological properties of the system were studied concerning time and temperature. Moreover, in vivo biocompatibility of the system was ascertained using the Draize test and histological studies. Finally, the optimized formulation was evaluated for in vitro antibacterial activity against one of the most common keratitis causing bacteria, Pseudomonas aeruginosa. Additionally, the in vivo efficacy was evaluated on the rabbit's eye conjunctivitis model. The formulation showed a sustained effect against keratitis; furthermore, the antibacterial activity was comparable with the commercial product.

New Preservative-Free Formulation for the Enhanced Ocular Bioavailability of Prostaglandin Analogues in Glaucoma

Glaucoma is a wide-spread eye disease caused by elevated intraocular pressure. Uncontrolled, this pressure may lead to damages to the optic nerve. Prostaglandin analogues, such as latanoprost and travoprost (which are water-insoluble active substances), are the most used class of active pharmaceutical ingredient. To administer them as eye drops, preservatives, such as benzalkonium chloride, are used as solubilizers. The latter is known to cause a local inflammation when used chronically and is not recommended for patients with ocular surface disorders. In this work, we sought to use polysorbate 80 (PS80) as a solubilizing agent simultaneously with sodium hyaluronate (NaHA) as a thickener and cytoprotective agent for the corneal surface. The first part of this study assessed the compatibility of the excipients with the active substance, using physicochemical methods such as spectra fluorescence and differential scanning calorimetry (DSC), as well as the solubilization mechanism of PS80 regarding prostaglandin analogues using nuclear magnetic resonance (NMR). The second part evaluated the stability of a formula candidate, its viscosity upon instillation, and its pharmacokinetic profile in rabbits as compared to the commercially approved medicine Travatan®. The results show that sodium hyaluronate is inert with respect to travoprost, while PS80 successfully solubilizes it, meaning that benzalkonium chloride is no longer required. Moreover, the pharmacokinetic profiles of the rabbits showed that the original formula described in the present study enhanced the ocular bioavailability of the drug, making it a promising product to control intraocular pressure with a potential reduced dosage of travoprost, therefore minimizing its related side effects.

Enhancing Ocular Bioavailability of Ciprofloxacin Using Colloidal Lipid-Based Carrier for the Management of Post-Surgical Infection

Conjunctivitis and endogenous bacterial endophthalmitis mostly occurred after ophthalmic surgery. Therefore, the present study aimed to maximize the ocular delivery of ciprofloxacin (CPX) using colloidal lipid-based carrier to control the post-surgical infection. In this study, CPX was formulated as ophthalmic liposomal drops. Two different phospholipids in different ratios were utilized, including phosphatidylcholine (PC) and dimyrestoyl phosphatidylcholine (DMPC). The physiochemical properties of the prepared ophthalmic liposomes were evaluated in terms of particle size, entrapment efficiency, polydispersity index, zeta potential, and cumulative CPX in-vitro release. In addition, the effect of sonication time on particle size and entrapment efficiency of CPX ophthalmic drops was also evaluated. The results revealed that most of the prepared formulations showed particle size in nanometer size range (460–1047 nm) and entrapment efficiency ranging from 36.4–44.7%. The antibacterial activity and minimum inhibitory concentration (MIC) were investigated. Ex vivo antimicrobial effect of promising formulations was carried out against the most common causes of endophthalmitis microorganisms. The pharmacokinetics of the prepared ophthalmic drops were tested in rabbit aqueous humor and compared with commercial CPX ophthalmic drops (Ciloxan^®). Observed bacterial suppression was detected in rabbit’s eyes conjunctivitis with an optimized formulation A3 compared with the commercial ophthalmic drops. CPX concentration in the aqueous humor was above MIC against tested bacterial strains. The in vivo data revealed that the tested CPX drops showed superiority over the commercial ones with respect to peak aqueous humor concentration, time to reach peak aqueous humor concentration, elimination rate constant, half-life, and relative bioavailability. Based on these results, it was concluded that the prepared ophthalmic formulations significantly enhanced CPX bioavailability compared with the commercial one.

In vivo and in vitro Evaluation of in situ Gel Formulation of Pemirolast Potassium in Allergic Conjunctivitis

Background

To establish a novel delivery system of pemirolast potassium-loaded gellan gum in situ gel in allergic conjunctivitis therapy.

Methods

The prepared in situ gels were studied in the following aspects: in vitro gelation, in vitro release, stability, viscosity measurement, in vivo tear kinetics and pharmacodynamics.

Results

In this study, the results showed that the viscosity of the in situ gels significantly increased when the preparation was in contact with simulated tear fluid and it also exhibited good stability in a period of three months. In vitro release showed that the release of pemirolast potassium from in situ gels had a good sustained release ability. No ocular damage or abnormal clinical signs to the cornea, iris, or conjunctivae were visible. Consistent with the in vitro studies, pemirolast potassium in situ gels were highly efficient in suppressing the inflammatory symptoms and improving the ocular bioavailability.

Conclusion

Pemirolast potassium ocular in situ gels are safe and promising therapeutic alternatives to the existing medications for allergic conjunctivitis therapy.

Novel Chitosan-Coated Niosomal Formulation for Improved Management of Bacterial Conjunctivitis: A Highly Permeable and Efficient Ocular Nanocarrier for Azithromycin

In the present study, we aimed to formulate, optimize, and characterize azithromycin chitosan coated niosomes (AZM-CTS-NSM) as a novel colloidal system that increases precorneal residence period, eye permeation, and bioavailability. AZM-NSM was formulated via a modified thin-film hydration strategy and then coated with CTS. We assessed the influence of the cholesterol: surfactant molar ratio, CTS concentration, and surfactant type on particle diameter, entrapment, zeta potential, and NSM adhesion force to the corneal mucosal membrane and employed a central composite design (CCD). The resulting optimized AZM-CTS-NSM has a mean diameter of 376 nm, entrapment of 74.2%, surface charge of 32.1 mV, and mucoadhesion force of 3114 dyne/cm². The optimized AZM-CTS-NSM demonstrated a prolonged in vitro release behavior. When compared with commercial eye drops, the optimized AZM-CTS-NSM produced a 2.61-fold increase in the apparent permeability coefficient, significantly improving corneal permeability. Additionally, ocular irritation was assessed, with no major irritant effects found to be induced by the formulated NSM. Compared with AZM commercial drops, the optimized AZM-CTS-NSM revealed ˃ 3-fold increase in AZM concentration in the rabbit eyes. Collectively, these findings indicate that CTS-NSM is a potentially valuable ocular nanocarrier that could augment the efficacy of AZM.

Stimuli-responsive In situ gelling system for nose-to-brain drug delivery

The diagnosis and treatment of neurological ailments always remain an utmost challenge for research fraternity due to the presence of BBB. The intranasal route appeared as an attractive and alternative route for brain targeting of therapeutics without the intrusion of BBB and GI exposure. This route directly and effectively delivers the therapeutics to different regions of the brain via olfactory and trigeminal nerve pathways. However, shorter drug retention time and mucociliary clearance curtail the efficiency of the intranasal route. The in situ mucoadhesive gel overthrow the limitations of direct nose-to-brain delivery by not only enhancing nasal residence time but also minimizing the mucociliary clearance and enzymatic degradation. This delivery system further improves the nasal absorption as well as bioavailability of drugs in the brain. The in situ mucoadhesive gel is a controlled and sustained release system that facilitates the absorption of various proteins, peptides and other larger lipophilic and hydrophilic moieties. Owing to multiple benefits, in situ gelling system has been widely explored to target the brain via nasal route. However, very few review works are reported which explains the application of in situ nasal gel for brain delivery of CNS acting moieties. Hence, in this piece of work, we have initially discussed the global statistics of neurological disorders reported by WHO and other reputed organizations, nasal anatomy, mechanism and challenges of nose-to-brain drug delivery. The work mainly focused on the use of different stimuli-responsive polymers, specifically thermoresponsive, pH-responsive, and ion triggered systems for the development of an effective and controlled dosage form, i.e., in situ nasal gel for brain targeting of bioactives. We have also highlighted the origin, structure, nature and phase transition behavior of the smart polymers found suitable for nasal administration, including poloxamer, chitosan, EHEC, xyloglucan, Carbopol, gellan gum and DGG along with their application in the treatment of neurological disorders. The article is aimed to gather all the information of the past 10 years related to the development and application of stimuli-responsive in situ nasal gel for brain drug delivery.

Optimized Nanostructured Lipid Carriers Integrated into In Situ Nasal Gel for Enhancing Brain Delivery of Flibanserin

Background and Aim

Flibanserin (FLB) is a multifunctional serotonergic agent used for treating hypoactive sexual desire disorder in premenopausal women via oral administration. FLB has a reported limited oral bioavailability of 33% that could be attributed to the drug’s first-pass metabolism. In addition, FLB has a pH-dependent solubility that could be a challenging factor for drug dissolution in the body neutral fluid, and consequently, absorption via mucosal barriers. Thus, this work aims at investigating the potential of utilizing nanostructured lipid carriers (NLCs) to overcome the aforementioned drawbacks and to enhance nose-to-brain drug delivery.

Methods

Box-Behnken design was applied to explore the impact of solid lipid % (SL%, X₁), liquid lipid % (LL%, X₂), and sonication time (ST, X₃) on particle size. The optimized NLC formulation was characterized and incorporated into gellan gum in situ gel. The prepared gel was subjected to in vitro drug release, in vivo pharmacokinetic performance, and histopathological assessment in rats.

Results

Statistical analysis revealed a significant negative effect for both SL% and ST on NLCs size. In contrast, a significant positive effect was observed for the LL%. The optimized formulation showed spherical shape with vesicular size of 114.63 nm. The optimized FLB-NLC in situ gel exhibited adequate stability and enhanced in vitro release compared to raw FLB control gel. The plasma and brain concentrations of the drug after nasal administration in rats increased by more than 3–6-fold, respectively, compared to raw FLB in situ gel. In addition, the histopathological studies revealed the absence of any pathological signs.

Conclusion

The aforementioned results highlight the safety of FLB-NLC in situ nasal gel and its potential to improve the drug bioavailability and brain delivery.

Intranasal Niosomal In Situ Gel as a Promising Approach for Enhancing Flibanserin Bioavailability and Brain Delivery: In Vitro Optimization and Ex Vivo/In Vivo Evaluation

Flibanserin (FLB) is a multifunctional serotonergic agent that was recently approved by the FDA for the oral treatment of premenopausal women with hypoactive sexual desire disorder. FLB is a centrally acting drug that has a low oral bioavailability of 33% owing to its exposure to the hepatic first-pass effect, as well as its pH-dependent solubility, which could be an obstacle hindering the drug dissolution and absorption via mucosal barriers. Thus, this work aimed at overcoming the aforementioned drawbacks and promoting the nose-to-brain delivery of FLB via the formulation of an intra-nasal in situ niosomal gel. The Box-Behnken design was employed to study the impact of Span® 85 concentration (X1), hydration time (X2), and pH of the hydrating buffer (X3) on the vesicle size and drug entrapment. The optimized formulation exhibited a spherical shape with a vesicular size of 46.35 nm and entrapment efficiency of 92.48%. The optimized FLB niosomes integrated into gellan gum-based in situ gel exhibited enhanced ex vivo permeation and improved plasma and brain concentrations after nasal administration in rats compared to raw FLB. These findings highlight the capability of the proposed intra-nasal FLB niosomal in situ gel to boost the drug bioavailability and to promote its direct delivery to the brain.

Electrospun nanofibers - A promising solid in-situ gelling alternative for ocular drug delivery

A serious problem of the treatment of eye diseases is the very short residence time of the drug. The majority of the drug is cleared within few seconds due to the poor capability of the eye to accommodate additional liquids. We developed a new ocular drug delivery system, which is applied in dry form and forms immediately a gel after administration. The system is based on gellan gum/pullulan electrospun nanofibers. The rheological behavior of the spinning solution was investigated followed by further characterization of the in situ formed gel. Three-dimensional X-ray imaging with nanometric resolution (nano-CT) and electron scanning microscopy were used for a detailed characterization of the diameter and alignment of the fibers. A high porosity (87.5 ± 0.5%) and pore interconnectivity (99%) was found. To ensure a good fit to the eye anatomy, the prepared fibers were shaped into curved geometries. Additionally, a new innovative moistening chamber for the in vitro determination of the ocular residence time in porcine eyes was developed which mimics the tear turnover. A clear prolongation of the fluorescein residence time compared to conventional eye drops was achieved with the application of the curved nanofiber in situ gelling mat. In summary, the developed in situ gelling system with adapted geometry is a promising alternative system for ocular drug delivery.

Novel in situ gelling ophthalmic drug delivery system based on gellan gum and hydroxyethylcellulose: Innovative rheological characterization, in vitro and in vivo evidence of a sustained precorneal retention time

Achieving drug delivery at the ocular level encounters many challenges and obstacles. In situ gelling delivery systems are now widely used for topical ocular administration and recognized as a promising strategy to improve the treatment of a wide range of ocular diseases. The present work describes the formulation and evaluation of a mucoadhesive and ion-activated in situ gelling delivery system based on gellan gum and hydroxyethylcellulose for the delivery of phenylephrine and tropicamide. First, physico-chemical characteristics were assessed to ensure suitable properties regarding ocular administration. Then, rheological properties such as viscosity and gelation capacity were determined. Gelation capacity of the formulations and the effect of hydroxyethylcellulose on viscosity were demonstrated. A new rheological method was developed to assess the gel resistance under simulated eye blinking. Afterward, mucoadhesion was evaluated using tensile strength test and rheological synergism method in both rotational and oscillatory mode allowing mucoadhesive properties of hydroxyethylcellulose to be point out. Finally, residence time on the ocular surface was investigated in vivo, using cyanine 5.5 dye as a fluorescent marker entrapped in the in situ gelling delivery systems. Residence performance was studied by non-invasive optical imaging on vigilant rabbits, allowing eye blinking and nasolacrimal drainage to occur physiologically. Fluorescence intensity profiles pointed out a prolonged residence time on the ocular surface region for the developed formulations compared to conventional eye drops, suggesting in vitro / in vivo correlations between rheological properties and in vivo residence performances.

In situ misemgel as a multifunctional dual-absorption platform for nasal delivery of raloxifene hydrochloride: formulation, characterization, and in vivo performance

BACKGROUND

Raloxifene hydrochloride (RLX) is approved by the US Food and Drug Administration for the treatment and prevention of osteoporosis, in addition to reducing the risk of breast cancer in postmenopausal women. RLX has the disadvantages of low aqueous solubility, extensive presystemic intestinal glucuronidation, and first-pass metabolism, resulting in a limited bio-availability of only 2%. The aim of this work was to enhance the bioavailability of RLX via the formulation of an in situ nasal matrix (misemgel) comprising micelles made of vitamin E and D-α-tocopheryl polyethylene glycol 1000 succinate and nanosized self-emulsifying systems (NSEMS).

MATERIALS AND METHODS

Optimization of the RLX-loaded NSEMS was performed using a mixture design. The formulations were characterized by particle size and then incorporated into an in situ nasal gel. Transmission electron microscopy, bovine nasal mucosa ex vivo permeation, and visualization using a fluorescence laser microscope were carried out on the RLX in situ misemgel comparing with raw RLX in situ gel. In addition, the in vivo performance was studied in rats.

RESULTS

The results revealed improved permeation parameters for RLX misemgel compared with control gel, with an enhancement factor of 2.4. In vivo studies revealed a 4.79- and 13.42-fold increased bioavailability for RLX in situ misemgel compared with control RLX in situ gel and commercially available tablets, respectively. The obtained results highlighted the efficacy of combining two different formulations to enhance drug delivery and the benefits of utilizing different possible paths for drug absorption.

CONCLUSION

The developed in situ misemgel matrix could be considered as a promising multifunctional platform for nasal delivery which works based on a dual-absorption mechanism.

In situ gelling and mucoadhesive polymers: why do they need each other?

INTRODUCTION

Mucosal drug delivery is an attractive route of administration, particularly in overcoming deficits of conventional dosage forms including high first-pass metabolism and poor bioavailability. Fast drainage from the target mucosa, however, represents a major limitation as it prevents sufficient drug absorption. In order to address these problems, mucoadhesive in situ gelling drug delivery systems have been investigated as they facilitate easy application in combination with a longer residence time at the administration site resulting in more desirable therapeutic effects.

AREAS COVERED

The present review evaluates the importance of the combination of mucoadhesive and in situ gelling polymers along with mechanisms of in situ gelation and mucoadhesion. In addition, an overview about recent applications in mucosal drug delivery is provided.

EXPERT OPINION

In situ gelling and mucoadhesive polymers proved to be essential excipients in order to prolong the mucosal residence time of drug delivery systems. Due to this prolonged residence time both local and systemic therapeutic efficacy of numerous drugs can be substantially improved. Depending on the site of administration and the incorporated drug, combinations of different polymers with in situ gelling and mucoadhesive properties are needed to keep the delivery system as long as feasible at the target site.

A novel ion-activated in situ gelling ophthalmic delivery system based on κ-carrageenan for acyclovir

The aim of this study was to prepare and evaluate ion-activated in situ gel ophthalmic drug delivery system based on κ-carrageenan (KC), using acyclovir as a model drug, hydroxypropyl methylcellulose (HPMC) as the viscosity agent and hydroxypropyl-β-cyclodextrin (HP-β-CD) as the penetration enhancer. The two ternary phase diagrams exhibited the effect of K⁺ and Ca²⁺ on the sol-to-gel transition, which turned out that KC was more sensitive to K⁺. The optimal ophthalmic matrix (prepared from KC and HPMC) was optimized with in vitro drug release test. The apparent permeability coefficient of acyclovir under 2% HP-β-CD was found to have dramatically increased (2.16-ploid) than that of conventional eye drops (p < .05). The ion-activated in situ gel based on KC significantly delayed drug release and its bioavailability could be improved in comparison with the conventional eye drops. Hence, it has the potential to be a novel kind of ocular drug delivery system.

Development of topical ophthalmic In Situ gel-forming estradiol delivery system intended for the prevention of age-related cataracts

The goal of this study was to develop and characterize an ion-activated in situ gel-forming estradiol (E2) solution eye drops intended for the prevention of age-related cataracts. Accordingly, in situ gelling eye drops were made using gellan gum as an ion-activated gel-forming polymer, polysorbate-80 as drug solubilizing agent, mannitol as tonicity agent, and combination of potassium sorbate and edetate disodium dihydrate (EDTA) as preservatives. The formulations were tested for the following characteristics: pH, clarity, osmolality, antimicrobial efficacy, rheological behavior, and in vitro drug release. Stability of the formulation was also monitored for 6 months at multiple storage conditions per ICH Q1A (R2) guidelines. The solution eye drops resulted in an in-situ phase change to gel-state when mixed with simulated tear fluid (STF). The gel structure formation was confirmed by viscoelastic measurements. Drug release from the gel followed non-fickian mechanism with 80% of drug released in 8 hr. The formulations were found to be clear, isotonic with suitable pH and viscoelastic behavior and stable at accelerated and long-term storage conditions for 6 months. In vitro results suggest that the developed formulation is suitable for further investigation in animal models to elucidate the ability of estrogen to prevent and delay cataracts.

Enhancement of Ocular In Situ Gelling Properties of Low Acyl Gellan Gum by Use of Ion Exchange

PURPOSE

The purpose of this study was to determine if the addition of calcium gluconate to gellan solution results in a stronger gel structure on initial exposure to tear fluid due to the displacement of calcium from the gluconate ion by tear monovalent cations (Na⁺, K⁺).

METHODS

Test solutions of gellan and gellan-calcium gluconate were mixed thoroughly with simulated tear fluid (STF) at a 5:1 ratio. The resulting gel was measured for viscosity at 32°C-36°C.

RESULTS

The addition of optimized amounts of calcium gluconate to gellan formulations resulted in gellan-calcium gluconate-STF gels of higher strength (statistically significant) than when gellan alone was mixed with STF. Gellan experimental preparations demonstrated thixotropic behavior both before and after addition of STF.

CONCLUSIONS

It appears possible to enhance the initial in situ gel-forming properties of gellan by adding a divalent cation bound to an ion exchange molecule or resin. Optimal amounts of polyvinylpyrrolidone (PVP) appear to be effective in slowing timolol release when added to gellan and calcium gluconate solutions.

Thiomers and their potential applications in drug delivery

INTRODUCTION

Thiomers are the product of the immobilization of sulfhydryl-bearing ligands onto the polymer backbone of a conventional polymer, which results in a significant improvement in mucoadhesion; in situ gelation and efflux inhibition compare with unchanged polymers. Because of thiol groups, thiomers have more reactivity and enhanced protection against oxidation. Since the late 1990s, extensive work has been conducted on these promising polymeric excipients in the pharmaceutical field. Areas covered: This review covers thiomers, their classification and their different properties. Various techniques for the synthesis, purification and characterization of thiomers are described in detail. This review also encompasses their various properties such as mucoadhesion, permeation enhancement, in situ gelation and efflux inhibition, as well as different formulations based on thiomers. In addition to the use of thiomers as multifunctional excipients, this review also encompasses their use as drugs. Expert opinion: The synthesis is realized by linkage of sulfhydryl-bearing ligands but reported methods give low yields. Higher degrees of modification are not necessary and would probably lead to extreme changes in properties. Nevertheless, an accurate characterization of the final product is important. The scale-up procedure for industrial manufacturing has been adapted to produce GMP materials; Lacrimera® eye drops have already entered the European market.

Novel in situ gel systems based on P123/TPGS mixed micelles and gellan gum for ophthalmic delivery of curcumin

Curcumin, a natural polyphenol compound, has been widely reported for diverse pharmacological effects and already been investigated for eye diseases. However, the water-insolubility of curcumin and the inherent penetration barriers in cornea make it difficult for curcumin to enter eye. This work aimed to develop ion-sensitive curcumin-loaded Pluronic P123 (P123)/D-a-tocopheryl polyethylene glycolsuccinate (TPGS) mixed micelle in situ gels (CUR-MM-ISGs) to prolong ocular retention time and improve cornea permeability. Central composite design-response surface methodology was applied for the optimization of curcumin-loaded P123/TPGS mixed micelles (CUR-MMs). Characterization tests showed that CUR-MMs were in spherical shape with small size and low critical micelle concentration. After dispersing the micelles in gellan gum solution (0.2%, w/w) at the ratio of 3:1 and 1:1 (v/v), respectively, CUR-MM-ISGs were formed and presented transparent appearance. Sustained release profile was obtained in vitro for both CUR-MM-ISGs (3:1 or 1:1, v/v). The irritation test proved that CUR-MM-ISGs as ophthalmic formulations were gentle and biocompatible towards ocular tissues. In addition, the ex vivo corneal penetration study indicated that the cumulative drug permeation amount of CUR-MM-ISGs (3:1, v/v) was respectively 1.16-fold and 1.32-fold higher than CUR-MM-ISGs (1:1, v/v) and curcumin solution. It can be concluded from these results that the developed ion-sensitive mixed micelle in situ gel system is a potential ophthalmic delivery carrier for curcumin as a poorly soluble drug.

Liposome incorporated ion sensitive in situ gels for opthalmic delivery of timolol maleate

This study was aimed to design a liposomal based ion-sensitive in situ ophthalmic delivery system of timolol maleate (TM). The TM liposome was produced by the reverse evaporation technique coupled with pH-gradients method (REVPR), and then was incorporated into deacetylated gellan gum gels. The TM liposome was demonstrated to be a round and uniform shape in TEM pictures. Compared with the TM eye drops, the TM liposome produced a 1.93 folds increase in apparent permeability coefficients (Papp), resulting in a significant increase of the corneal penetration. The TM-loaded liposome incorporated ion sensitive in situ gels (TM L-ISG) showed longer retention time on corneal surface compared with the eye drops using gamma scintigraphy technology. Draize testing showed that TM L-ISG was non-irritant for ocular tissues. The biggest efficacy of TM L-ISG occurred 30 min after eye drops administration, and efficacy disappeared after 240min. Then, compared with the eye drops, the optimal TM L-ISG could quickly reduce the intraocular pressure and the effective time was significantly longer (P≤0.05). These results indicate that liposome incorporated ion sensitive in situ gels have a potential ability for the opthalmic delivery.

Preactivated thiomers: their role in drug delivery

INTRODUCTION

Since thiolated polymers - known as thiomers - have entered the pharmaceutical arena in the late 1990 s, more and more academic and industrial research groups have started to work with these promising polymeric excipients. Meanwhile, various thiomers are the subject of clinical trials and the first product based on thiolated chitosan will reach the market in 2015. Due to the formation of disulfide bonds with mercaptopyridine substructures, thiol groups of thiomers are on the one hand more reactive and on the other hand are protected toward oxidation. These so-called preactivated thiomers representing the second generation of thiomers are subject of this review.

AREAS COVERED

Within this review, preactivated thiomers are classified and their mode of action is described. Furthermore, different synthetic pathways, purification and chemical characterization methods of preactivated thiomers are explained. Their properties including mucoadhesive, permeation-enhancing, efflux pump inhibitory and in situ gelling properties are described. In addition, various formulations based on preactivated thiomers are introduced.

EXPERT OPINION

The first-generation thiomers have already shown great potential resulting in various product developments. Preactivated thiomers - representing the second generation of thiomers - offer the additional advantage of even comparatively more reactive sulfhydryl ligands and of stability toward oxidation. According to this, they are promising novel polymeric excipients for various applications.

Formulation and in vitro evaluation of size expanding gastro-retentive systems of levofloxacin hemihydrate

Size increasing (plug-type) levofloxacin hemihydrate (LVF) tablets for eradication of Helicobacter pylori (H. pylori) were prepared using in situ gel forming polymers including: gellan gum, sodium alginate, pectin and xanthan gum. Effect of cross-linkers: calcium and aluminum chloride, on the drug release was also studied. The prepared tablets were evaluated for their physicochemical parameters: weight variation, thickness, friability, hardness, drug content, water uptake and in vitro drug release. The optimized formula was subjected to further studies such as radial swelling test, FT-IR and DSC. Results revealed that LVF release depends not only on the nature of the matrix but also on the type of cross linker used to form this polymeric matrix. The addition of either calcium chloride or aluminum chloride, as cross-linkers, to gellan gum formulations significantly decreased drug release. Other polymers' formulations resulted in increased drug release upon addition of the same cross-linkers. The formula containing xanthan gum without any cross linker showed the most sustained LVF release with an increase in diameter with time, thus acting as a plug-type dosage form. IR spectra and DSC thermograms of LVF, xanthan gum, and a physical mixture of both, indicated that there was no interaction between the drug and the polymer and confirmed the drug stability.

Natural and synthetic biomaterials for controlled drug delivery

A wide variety of delivery systems have been developed and many products based on the drug delivery technology are commercially available. The development of controlled-release technologies accelerated new dosage form design by altering pharmacokinetic and pharmacodynamics profiles of given drugs, resulting in improved efficacy and safety. Various natural or synthetic polymers have been applied to make matrix, reservoir or implant forms due to the characteristics of polymers, especially ease of control for modifications of biocompatibility, biodegradation, porosity, charge, mechanical strength and hydrophobicity/hydrophilicity. Hydrogel is a hydrophilic, polymeric network capable of imbibing large amount of water and biological fluids. This review article introduces various applications of natural and synthetic polymer-based hydrogels from pharmaceutical, biomedical and bioengineering points of view.

Design of liposomal colloidal systems for ocular delivery of ciprofloxacin

Ophthalmic drug bioavailability is limited due to protective mechanisms of the eye which require the design of a system to enhance ocular delivery. In this study several liposomal formulations containing ciprofloxacin (CPX) have been formulated using reverse phase evaporation technique with final dispersion of pH 7.4. Different types of phospholipids including Phosphatidylcholine, Dipalmitoylphosphatidylcholine and Dimyristoyl-sn-glycero-3-phosphocholine were utilized. The effect of formulation factors such as type of phospholipid, cholesterol content, incorporation of positively charging inducing agents and ultrasonication on the properties of the liposomal vesicles was studied. Bioavailability of selected liposomal formulations in rabbit eye aqueous humor has been investigated and compared with that of commercially available CPX eye drops (Ciprocin®). Pharmacokinetic parameters including Cmax, Tmax, elimination rate constant, t1/2, MRT and AUC0-∞, were determined. The investigated formulations showed more than three folds of improvement in CPX ocular bioavailability compared with the commercial product.

In situ gel systems as 'smart' carriers for sustained ocular drug delivery

INTRODUCTION

In situ gel systems refer to a class of novel delivery vehicles, composed of natural, semisynthetic or synthetic polymers, which present the unique property of sol-gel conversion on receipt of biological stimulus.

AREAS COVERED

The present review summarizes the latest developments in in situ gel technology, with regard to ophthalmic drug delivery. Starting with the mechanism of ocular absorption, the review expands on the fabrication of various polymeric in situ gel systems, made up of two or more polymers presenting multi-stimuli sensitivity, coupled with other interesting features, such as bio-adhesion, enhanced penetration or sustained release. Various key issues and challenges in this area have been addressed and critically analyzed.

EXPERT OPINION

The advent of in situ gel systems has inaugurated a new transom for 'smart' ocular delivery. By virtue of possessing stimuli-responsive phase transition properties, these systems can easily be administered into the eye, similar to normal eye drops. Their unique gelling properties endow them with special features, such as prolonged retention at the site of administration, followed by sustained drug release. Despite the superiority of these systems as compared with conventional ophthalmic formulations, further investigations are necessary to address the toxicity issues, so as to minimize regulatory hurdles during commercialization.