Freeze-drying of polycaprolactone and poly(D,L-lactic-glycolic) nanoparticles induce minor particle size changes affecting the oral pharmacokinetics of loaded drugs

Zein-PEG nanoparticles modified with hyaluronic acid for paclitaxel delivery in SKOV3 ovarian cancer cells

Ovarian cancer is a leading gynecological cancer globally. This study aimed to develop hyaluronic acid-modified polyethylene glycol conjugated zein nanoparticles (zein-PEG/HA NPs) to enhance paclitaxel (PTX) cytotoxicity in SKOV3 ovarian cancer cells. Zein-PEG, with its amphiphilic nature, self-assembled into micelles to encapsulate the hydrophobic PTX, while the PEG shell retained micelle stability and hemolytic resistance. PTX@zein-PEG micelles (17.2 ± 0.3 mV) were complexed with negatively charged HA through electrostatic interactions, resulting in PTX@zein-PEG/HA NPs with a negative zeta potential of -15.3 ± 1.1 mV. Cellular uptake of fluorescent zein-PEG/HA NPs was higher than zein-PEG micelles in CD44-overexpressing SKOV3 cells. Additionally, PTX@zein-PEG/HA NPs demonstrated significantly greater cytotoxicity than free PTX and PTX@zein-PEG micelles, with IC50 values reduced by 6.13-fold and 3.58-fold, respectively. PTX@zein-PEG/HA NPs induced the highest expression levels of apoptotic proteins, particularly PARP, in SKOV3 cells compared to PTX@zein-PEG NPs and free PTX. In summary, PTX@zein-PEG/HA NPs demonstrated potential as a delivery system for PTX in ovarian cancer.

In vitro drug release profiling of Sirolimus polymeric microparticles coated long-acting stents

In the realm of arterial disease interventions, drug-eluting stents (DES) have become a vital therapeutic choice in preventing atherosclerotic plaque formation and restenosis and facilitating vessel healing. Sirolimus-encapsulated poly Lactic-co-Glycolic acid (PLGA) Microparticles (MPs) were developed using solvent evaporation. MPs were freeze-dried with a cryoprotectant and coated on the stent surface using an efficient and reproducible nitrogen-assisted spray coating technique. The MPs displayed a uniform distribution particle size of 4.38 ± 1.1 μm, span value of 0.88 ± 0.02, coating mass transfer efficiency of 13.45 ± 1.1 % on the stent, and a coating time of ≤ 2 min per stent. Post sterilization, the particle size and morphology of the coated stents remained unchanged. Accelerated in vitro drug release profiles were evaluated under different conditions, indicating significant influences based on dissolution methods ranging from 28.2 %±4.3 %, 42.5 %±5.3 %, 76.6 %±4.7 %, and 84.25 %±3.1 % for dialysis bag (DB), vessel simulating flow-through cell (vFTC), flow-through cell (FTC), and sample and separate (SS) technique respectively for 48 h. The drug release mechanism from the coated stents is governed by the combination of the Korsmeyer Peppas and Higuchi models. The developed dissolution method exhibited discriminative effectiveness when evaluated with critical formulation attributes and process parameter variations. The 48 h accelerated drug release studies correlated well with the 6-month real-time release rate with an R2 value of 0.9142 and Pearson's R2 of 0.9561. Ex-vivo studies demonstrated the permeation of MPs into artery tissues. Stability studies confirmed that MPs coated stents maintained desired properties at 4 °C and 30 °C/65 % RH for 6 months. Overall, these findings contribute to advancing stent technology, suggesting the potential for improvement of arterial interventions and enhanced patient outcomes.

Oral polysaccharide-coated liposome-modified double-layered nanoparticles containing anthocyanins: preparation, characterization, biocompatibility and evaluation of lipid-lowering activity in vitro

Anthocyanins (ACNs) systems encapsulated in nanomaterials have received widespread attention and rapid development due to its good delivery potential. Here, the favorable benefits of four natural polysaccharide food additives coated ACNs-liposome nanoparticles (ACNs-Lipo NPs) on the stability and possible lipid-lowering effects of ACNs are discussed in this work. The polysaccharides were coupled to the ACNs-Lipo NPs and self-assembled to create ACNs-Lipo@polysaccharide NPs. The impact of various polysaccharides on the physical, chemical, and stability characteristics of NPs was examined. We found that the NPs prepared with gum arabic (GA) had the best stability. FT-IR and XRD analysis revealed electrostatic adsorption and hydrogen binding forces between the components, as well as an amorphous structure. A series of tests in vitro confirmed the excellent stability, bioavailability, antioxidant activity, and biocompatibility of NPs. Finally, cellular antioxidant activity (CAA) and oleic acid (OA)-induced lipid deposition cell models revealed that ACNs-Lipo@GA might be more readily absorbed by cells, resulting in improved antioxidant activity and lipid-lowering impact, with possible targeted delivery qualities and lipid-lowering effect.

Intracellular Trafficking of Size-Tuned Nanoparticles for Drug Delivery

Polymeric nanoparticles (NPs) are widely used as drug delivery systems in nanomedicine. Despite their widespread application, a comprehensive understanding of their intracellular trafficking remains elusive. In the present study, we focused on exploring the impact of a 20 nm difference in size on NP performance, including drug delivery capabilities and intracellular trafficking. For that, poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PLGA-PEG) NPs with sizes of 50 and 70 nm were precisely tailored. To assess their prowess in encapsulating and releasing therapeutic agents, we have employed doxorubicin (Dox), a well-established anticancer drug widely utilized in clinical settings, as a model drug. Then, the beneficial effect of the developed nanoformulations was evaluated in breast cancer cells. Finally, we performed a semiquantitative analysis of both NPs' uptake and intracellular localization by immunostaining lysosomes, early endosomes, and recycling endosomes. The results show that the smaller NPs (50 nm) were able to reduce the metabolic activity of cancer cells more efficiently than NPs of 70 nm, in a time and concentration-dependent manner. These findings are corroborated by intracellular trafficking studies that reveal an earlier and higher uptake of NPs, with 50 nm compared to the 70 nm ones, by the breast cancer cells. Consequently, this study demonstrates that NP size, even in small increments, has an important impact on their therapeutic effect.

Development of a cationic polyethyleneimine-poly(lactic-co-glycolic acid) nanoparticle system for enhanced intracellular delivery of biologics

Intracellular delivery of proteins, peptides and biologics is an emerging field which has the potential to provide novel opportunities to target intracellular proteins, previously deemed 'undruggable'. However, the delivery of proteins intracellularly remains a challenge. Here, we present a cationic nanoparticle delivery system for enhanced cellular delivery of proteins through use of a polyethyleneimine and poly-(lactic-co-glycolic acid) polymer blend. Cationic nanoparticles were shown to provide increased cellular uptake compared to anionic and neutral nanoparticles, successfully delivering Variable New Antigen Receptors (vNARs), entrapped within the nanoparticle core, to the cell interior. vNARs were identified as ideal candidates for nanoparticle entrapment due to their remarkable stability. The optimised 10% PEI-PLGA nanoparticle formulation displayed low toxicity, was uniform in size and possessed appropriate cationic charge to limit cellular toxicity, whilst being capable of escaping the endo/lysosomal system and delivering their cargo to the cytosol. This work demonstrates the ability of cationic nanoparticles to facilitate intracellular delivery of vNARs, novel biologic agents with potential utility towards intracellular targets.

Excipient-free lyophilization of block copolymer micelles for potential lung surfactant therapy applications

Polymer lung surfactant (PLS) is a polyethylene glycol (PEG)-brushed block copolymer micelle designed for pulmonary surfactant replacement therapy. Saccharides (e.g., sucrose and (2-hydroxypropyl)-β-cyclodextrin) and water-soluble polymers (e.g., PEG), common excipients for lyophilization, were found to severely impair the surface activity of lyophilized PLS. To investigate the feasibility of excipient-free lyophilization of PLS, we studied the effects of both PLS material parameters and lyophilization operating parameters on the redispersibility and surface availability of reconstituted PLS, all without relying on excipients. We found that the redispersibility was improved by three factors; a faster cooling rate during the freezing stage reduced freezing stress; a higher PEG grafting density enhanced dissipating effects; and the absence of hydrophobic endgroups in the PEG block further prevented micelle aggregation. Consequently, the surface availability of PLS increased, enabling the micelle monolayer at the air/water interface to achieve a surface tension below 10 mN/m, which is a key pharmaceutical function of PLS. Moreover, the lyophilized micelles in powder form could be easily dispersed on water surfaces without the need for reconstitution, which opens up the possibility of inhalation delivery, a more patient-friendly administration method compared to instillation. The successful excipient-free lyophilization unlocks the potential of PLS for addressing acute respiratory distress syndrome (ARDS) and other pulmonary dysfunctions.

Optimization of the different phases of the freeze-drying process of solid lipid nanoparticles using experimental designs

In this work, the effect of cryoprotectant type and concentration and freeze-drying process parameters were evaluated to determine an optimal freeze-drying process for celecoxib-loaded solid lipid nanoparticles. Different cryoprotectants were tested at different weight ratios (cryoprotectant:lipid). Trehalose, maltose, and sucrose at a 1:1 wt ratio were selected for further use in optimizing the freeze-drying process through experimental designs to accurately define the freezing, primary, and secondary drying conditions of the freeze-drying process. The optimal freeze-dried solid lipid nanoparticles were subjected to a 6-month stability study at either 4 °C or 25 °C/60% RH, resulting in significant growth when the nanoparticles were stored at 25 °C/60% RH. The best results were obtained with trehalose as a cryoprotectant and storage at 4 °C. Furthermore, the in vitro release data showed a significantly different release profile before and after optimization of the freeze-drying process, suggesting that the optimization of the freeze-drying process affected the quality of the freeze-dried cake. In conclusion, a successful lyophilization process was obtained due to rational cooperation between a good formulation and optimal conditions in the freezing and drying steps. This yielded an acceptable non-collapsed freeze-dried cake with good redispersibility, minimal changes in physicochemical properties, and long-term stability at 4 °C.

Stabilization of Antioxidant and Anti-Inflammatory Activities of Nano-Selenium Using Anoectochilus burmannicus Extract as a Potential Novel Functional Ingredient

Anoectochilus burmannicus is an orchid that contains phenolic compounds and exhibits antioxidant and anti-inflammation properties. This study aimed to investigate whether its ethanolic extract (ABE) can be used as a reducing agent and/or a stabilizer of nano-selenium (SeNP) synthesis. SeNPs exhibited higher antioxidant activity than ABE-SeNPs. In contrast, ABE-SeNP (4 µM Se) had greater anti-inflammatory activity in LPS-induced macrophages than SeNPs. Interestingly, ABE acted as a stabilizer for SeNPs by preventing particle aggregation and preserving its antioxidant activity after long-term storage (90 days). Moreover, after the freeze-drying process, ABE-SeNPs could be completely reconstituted to suspension with significantly stable antioxidant and anti-inflammatory activities compared to freshly prepared particles, suggesting the cryoprotectant and/or lyoprotectant role of ABE. The present study shows the potential of ABE as an effective stabilizer for nanoparticles and provides evidence for the development of ABE-SeNPs as a food supplement or novel functional ingredient for health benefits.

Pharmacokinetics and Anti-Diabetic Studies of Gliclazide Nanosuspension

Gliclazide (GCZ), an antidiabetic medication, has poor solubility and limited oral bioavailability due to substantial first-pass metabolism. Thus, the purpose of the current study was to optimize and formulate a GCZ nanosuspension (NS) employing the antisolvent precipitation technique. A three-factor, three-level Box–Behnken design (BBD) was used to examine the impact of the primary formulation factors (drug concentration, stabilizer, and surfactant %) on particle size. The optimized NS contains 29.6 mg/mL drug, 0.739% lecithin, and 0.216% sodium dodecyl sulfate (SDS). Under scanning microscopy, the topography of NS revealed spherical particles. Furthermore, NS had a much better saturation solubility than the pure material, which resulted in a rapid dissolving rate, which was attributed to the amorphous structure and smaller particle size of the NS particles. Studies on intestinal permeability using the in vitro noneverted intestinal sac gut method (duodenum, jejunum, and ileum) and single-pass intestinal permeability (SPIP) techniques showed that the effective permeability was also increased by more than 3 fold. In the pharmacokinetic study, the C_max and AUC_0–t values of NS were approximately 3.35- and 1.9-fold higher than those of the raw medication and marketed formulation (MF). When compared to plain drug and commercial formulations, the antidiabetic efficacy of NS demonstrated that it had a significant impact on lowering glucose levels.

Pulsatile Controlled Release and Stability Evaluation of Polymeric Particles Containing Piper nigrum Essential Oil and Preservatives

Considerable efforts have been spent on environmentally friendly particles for the encapsulation of essential oils. Polymeric particles were developed to encapsulate the essential oil from Piper nigrum based on gelatin and poly-ε-caprolactone (PCL) carriers. Gas Chromatography ((Flame Ionization Detection (GC/FID) and Mass Spectrometry (GC/MS)), Atomic Force Microscopy (AFM), Nanoparticle Tracking Analysis (NTA), Confocal Laser Scanning Microscopy (CLSM), Attenuated Total Reflectance-Fourier-transform Infrared Spectroscopy (ATR-FTIR), and Ultraviolet-Visible (UV-VIS) spectroscopy were used for the full colloidal system characterization. The essential oil was mainly composed of β-caryophyllene (~35%). The stability of the encapsulated systems was evaluated by Encapsulation Efficiency (EE%), electrical conductivity, turbidity, pH, and organoleptic properties (color and odor) after adding different preservatives. The mixture of phenoxyethanol/isotialzoni-3-one (PNE system) resulted in enhanced stability of approximately 120 and 210 days under constant handling and shelf-life tests, respectively. The developed polymeric system presented a similar controlled release in acidic, neutral, or basic pH, and the release curves suggested a pulsatile release mechanism due to a complexation of essential oil in the PCL matrix. Our results showed that the developed system has potential as an alternative stable product and as a controlling agent, due to the pronounced bioactivity of the encapsulated essential oil.

Abemaciclib-loaded ethylcellulose based nanosponges for sustained cytotoxicity against MCF-7 and MDA-MB-231 human breast cancer cells lines

Abemaciclib (AC) is a novel, orally available drug molecule approved for the treatment of breast cancer. Due to its low bioavailability, its administration frequency is two to three times a day that can decrease patient compliance. Sustained release formulation are needed for prolong the action and to reduce the adverse effects. The aim of current study was to develop sustained release NSs of AC. Nanosponges (NSs) was prepared by emulsion-solvent diffusion method using ethyl-cellulose (EC) and Kolliphor P-188 (KP-188) as sustained-release polymer and surfactant, respectively. Effects of varying surfactant concentration and drug: polymer proportions on the particle size (PS), polydispersity index (PDI), zeta potential (ζP), entrapment efficiency (%EE), and drug loading (%DL) were investigated. The results of AC loaded NSs (ACN1-ACN5) exhibited PS (366.3–842.2 nm), PDI (0.448–0.853), ζP (−8.21 to −19.7 mV), %EE (48.45–79.36%) and %DL (7.69–19.17%), respectively. Moreover, ACN2 showed sustained release of Abemaciclib (77.12 ± 2.54%) in 24 h Higuchi matrix as best fit kinetics model. MTT assay signified ACN2 as potentials cytotoxic nanocarrier against MCF-7 and MDA-MB-231 human breast cancer cells. Further, ACN2 displayed drug release property without variation in the % release after exposing the product at 25 °C, 5 °C, and 45 °C storage conditions for six months. This investigation proved that the developed NSs would be an efficient carrier to sustain the release of AC in order to improve efficacy against breast cancer.

Influence of the Dispersion Medium and Cryoprotectants on the Physico-Chemical Features of Gliadin- and Zein-Based Nanoparticles

The evaluation of the physico-chemical features of nanocarriers is fundamental because the modulation of these parameters can influence their biological and in vivo fate. This work investigated the feasibility of saline, 5% w/v glucose and phosphate-buffered saline solution, as polar media for the development of nanoparticles made up of two vegetal proteins, zein from corn and gliadin from wheat, respectively. The physico-chemical features of the various systems were evaluated using dynamic and multiple light scattering techniques, and the results demonstrate that the 5% w/v glucose solution is a feasible medium to be used for their development. Moreover, the best formulations were characterized by the aforementioned techniques following the freeze-drying procedure. The aggregation of the zein nanoparticles prepared in water or glucose solution was prevented by using various cryoprotectants. Mannose confirmed its crucial role in the cryopreservation of the gliadin nanosystems prepared in both water and glucose solution. Sucrose and glucose emerged as additional useful excipients when they were added to gliadin nanoparticles prepared in a 5% glucose solution. Specifically, their protective effect was in the following order: mannose > sucrose > glucose. The results obtained when using specific aqueous media and cryoprotectants permitted us to develop stable zein or gliadin nanoparticles as suspension or freeze-dried formulations.

Alendronate sodium-polymeric nanoparticles display low toxicity in gastric mucosal of rats and Ofcol II cells

The use of bisphosphonates constitutes the gold-standard therapy for the control and treatment of bone diseases. However, its long-term use may lead to gastric problems, which limits the treatment. Thus, this study aimed to formulate a nanostructured system with biodegradable polymers for the controlled release of alendronate sodium. The nanoparticles were characterized, and its gastric toxicity was investigated in rats. The synthesis process proved to be effective for encapsulating alendronate sodium, exhibiting nanoparticles with an average size of 51.02 nm and 98.5% of alendronate sodium incorporation. The release tests demonstrated a controlled release of the drug in 420 min, while the morphological analyzes showed spherical shapes and no apparent roughness. The biological tests demonstrated that the alendronate sodium nanoformulation reversed the gastric lesions, maintaining the normal levels of malondialdehyde and myeloperoxidase. Also, the encapsulated alendronate sodium showed no toxicity in murine osteoblastic cells, even at high concentrations.

Increased Water-Solubility and Maintained Antioxidant Power of Resveratrol by Its Encapsulation in Vitamin E TPGS Micelles: A Potential Nutritional Supplement for Chronic Liver Disease

Children affected by chronic liver disease exhibit impaired neurocognitive development and growth due to the low absorption and digestion of nutrients. Furthermore, malnutrition is an adverse prognostic factor in liver transplantation as it is associated with an increase in morbidity and mortality. D-α-tocopheryl-polyethylene-glycol-succinate (TPGS) is currently administered per os as a vitamin E source to improve children's survival and well-being; however, TPGS alone does not reverse spinocerebellar degeneration and lipid peroxidation. To potentiate the effects of TPGS, we loaded micelles with resveratrol (RES), a natural polyphenol, with antioxidant and antiinflammatory activities, which has demonstrated protective action in the liver. Firstly, we investigated the suitability of TPGS to encapsulate RES in micelles by means of a phase-solubility study, then RES-TPGS formulations were prepared via solvent casting and solvent diffusion evaporation methods. RES-TPGS colloidal dispersions showed small mean diameters (12 nm), low polydispersity, and quite neutral Zeta potentials. The formulations showed a sustained drug release and a good drug loading capacity, further confirmed by infrared spectroscopy and differential scanning calorimetry. RES-TPGSs exhibited unaltered antioxidant activity compared to pristine RES via the DPPH assay and a significant reduction in toxicity compared to empty TPGS on HaCaT cells. Thus, RES-TPGS micelles may overcome the challenges of current liver disease therapy by providing more protective effects thanks to the antioxidant activity of RES and by reducing the surfactant toxicity on normal cells.

Lyophilization of Nanocapsules: Instability Sources, Formulation and Process Parameters

Polymeric nanocapsules have gained more and more interest in the medical sciences. Their core-shell structure offers numerous advantages, especially regarding their use as drug delivery systems. This review begins by presenting the different intrinsic sources of the instability of nanocapsules. The physical and chemical potential instabilities of nanocapsules reduce their shelf-life and constitute a barrier to their clinical use and to their commercialization. To overcome these issues, lyophilization is often used as a process of choice in the pharmaceutical industry especially when labile compounds are used. The state of the art of lyophilization nanocapsules is reviewed. The formulation properties and the process parameters are discussed for a complete understanding of their impact on the stability and storage of the final dried product. To assess the quality of the dried product, various characterization methods are also discussed.

Efficient transfection and long-term stability of rno-miRNA-26a-5p for osteogenic differentiation by large pore sized mesoporous silica nanoparticles

MicroRNA (miRNA) based therapy for bone repair has shown promising results for regulating stem cell proliferation and differentiation, an efficient and stable vector for delivery of microRNA delivery is needed. The present study explored the stability and functionality of lyophilized mesoporous silica nanoparticles with core-cone structure and coated with polyethylenimine (MSN-CC-PEI) as a system for delivering Rattus norvegicus (rno)-miRNA-26a-5p into rat marrow mesenchymal cells (rBMSCs) to promote their osteogenic differentiation. We assessed the cellular uptake and transfection efficiency of nanoparticles loaded with labelled miRNA using confocal laser scanning microscopy and flow cytometry, and the cell viability using the MTT assay. The expression levels of osteogenic genes after one and two weeks were analysed by quantitative reverse transcription-polymerase chain reaction (qRT-PCR). Extracellular matrix deposition and mineralization at 3 weeks were evaluated using Picro Sirius red and Alizarin red staining. We also assessed the performance of the delivery system after long term storage, by freeze drying rno-miRNA-26a-5p@MSN-CC-PEI with 5% trehalose and keeping them at -30 °C for 3 and 6 months. Osteogenic differentiation, matrix deposition, and mineralization were all significantly increased by rno-miRNA-26a-5p. In addition, this enhancement was not significantly altered by lyophilization and storage. Overall, these findings support the concept of MSN-CC-PEI as a delivery system for gene therapy. The complex of rno-miRNA-26a-5p@MSN-CC-PEI could efficiently transfect rBMSCs and enhance their osteogenic differentiation. In addition, the lyophilized complexes remain functional after 6 months of storage.

Freeze-drying of nanoparticles: How to overcome colloidal instability by formulation and process optimization

Lyophilization of nanoparticle (NP) suspensions is a promising technology to improve stability, especially during long-term storage, and offers new routes of administration in solid state. Although considered as a gentle drying process, freeze-drying is also known to cause several stresses leading to physical instability, e.g. aggregation, fusion, or content leakage. NPs are heterogeneous regarding their physico-chemical properties which renders them different in their sensitivity to lyophilization stress and upon storage. But still basic concepts can be deducted. We summarize basic colloidal stabilization mechanisms of NPs in the liquid and the dried state. Furthermore, we give information about stresses occurring during the freezing and the drying step of lyophilization. Subsequently, we review the most commonly investigated NP types including lipophilic, polymeric, or vesicular NPs regarding their particle properties, stabilization mechanisms in the liquid state, and important freeze-drying process, formulation and storage strategies. Finally, practical advice is provided to facilitate purposeful formulation and process development to achieve NP lyophilizates with high colloidal stability.

Ferulic Acid-Loaded Polymeric Nanoparticles for Potential Ocular Delivery

Ferulic acid (FA) is an antioxidant compound that can prevent ROS-related diseases, but due to its poor solubility, therapeutic efficacy is limited. One strategy to improve the bioavailability is nanomedicine. In the following study, FA delivery through polymeric nanoparticles (NPs) consisting of polylactic acid (NPA) and poly(lactic-co-glycolic acid) (NPB) is proposed. To verify the absence of cytotoxicity of blank carriers, a preliminary in vitro assay was performed on retinal pericytes and endothelial cells. FA-loaded NPs were subjected to purification studies and the physico-hemical properties were analyzed by photon correlation spectroscopy. Encapsulation efficiency and in vitro release studies were assessed through high performance liquid chromatography. To maintain the integrity of the systems, nanoformulations were cryoprotected and freeze-dried. Morphology was evaluated by a scanning electron microscope. Physico-chemical stability of resuspended nanosystems was monitored during 28 days of storage at 5 °C. Thermal analysis and Fourier-transform infrared spectroscopy were performed to characterize drug state in the systems. Results showed homogeneous particle populations, a suitable mean size for ocular delivery, drug loading ranging from 64.86 to 75.16%, and a controlled release profile. The obtained systems could be promising carriers for ocular drug delivery, legitimating further studies on FA-loaded NPs to confirm efficacy and safety in vitro.

Post-synthesis nanostructuration of BSA-Capsaicin nanoparticles generated by sucrose excipient

In the pharmaceutical industry nano-hydrocolloid systems frequently coalesce or present nanoparticle aggregation after a long storage periods. Besides, the lyophilization process used to dry nanoparticles (NPs) produces loss of their original properties after dispersion. In this work we evaluated the effect on morphology and physicochemical properties of different protective excipients during drying of bovine serum albumin (BSA) NPs loaded with different concentrations of capsaicin. Capsaicin concentrations of 0, 812, 1625, 2437, and 3250 µg mL⁻¹ were used; subsequently, NPs were dried with deionized water (DW), NaCl (DN), sucrose (DS), and not dried (ND). We found that ND, DW, and DN treatments showed a negative effect on the NPs properties; while, DS reduced the aggregation and produced the formation of isolated nanoparticles at higher concentrations of capsaicin (3250 µg mL⁻¹), improving their circular shape, morphometrical parameters, and ζ-potential. The stability of the BSA-capsaicin NPs was associated to complex capsaicin/amino acid/water, in which GLY/GLN, ALA/HIS, ARG, THR, TYR, and Iso/CYS amino acids are involved in the restructuration of capsaicin molecules into the surface of nanoparticles during the drying process. The secondary nanostructuration in the post-synthesis stage can improve the molecular stability of the particles and the capacity of entrapping hydrophobic drugs, like capsaicin.

Nanotechnological strategies for systemic microbial infections treatment: A review

Systemic infections is one of the major causes of mortality worldwide, and a shortage of drug approaches applied for the rapid and necessary treatment contribute to increase the levels of death in affected patients. Several drug delivery systems based in nanotechnology such as metallic nanoparticles, liposomes, nanoemulsion, microemulsion, polymeric nanoparticles, solid lipid nanoparticles, dendrimers, hydrogels and liquid crystals can contribute in the biological performance of active substances for the treatment of microbial diseases triggered by fungi, bacteria, virus and parasites. In the presentation of these statements, this review article present and demonstrate the effectiveness of these drug delivery systems for the treatment of systemic diseases caused by several microorganisms, through a review of studies on scientific literature worldwide that contributes to better information for the most diverse professionals from the areas of health sciences. The studies demonstrated that the drug delivery systems described can contribute to the therapeutic scenario of these diseases, being classified as safe, active platforms and with therapeutic versatility.

Optimization and Evaluation of Poly(lactide-co-glycolide) Nanoparticles for Enhanced Cellular Uptake and Efficacy of Paclitaxel in the Treatment of Head and Neck Cancer

The particle size (PS) and encapsulation efficiency (EE%) of drug-loaded nanoparticles (NPs) may inhibit their cellular uptake and lead to possible leakage of the drug into the systemic circulation at the tumor site. In this work, ultra-high paclitaxel-loaded poly(lactide-co-glycolide) NPs (PTX-PLGA-NPs) with ultra-small sizes were prepared and optimized by adopting the principles of quality by design (QbD) approach. The optimized PTX-PLGA-NPs showed ultra-small spherical particles of about 53 nm with EE% exceeding 90%, a relatively low polydispersity index (PDI) of 0.221, an effective surface charge of -10.1 mV, and a 10-fold increase in the in vitro drug release over 72 h relative to free drug. The cellular viability of pharynx carcinoma cells decreased by almost 50% in 24 h following treatment with optimized PTX-PLGA-NPs, compared to only 20% from the free drug. The intracellular uptake of PTX-PLGA-NPs was highly favored, and the antitumor activity of PTX was remarkably improved with a reduction in its half maximal inhibitory concentration (IC50), by almost 50% relative to free drug solution. These results suggest that the optimal critical formulation parameters, guided by QbD principles, could produce PLGA-NPs with remarkably high EE% and ultra-small PS, resulting in enhanced cellular uptake and efficacy of PTX.

Functionally engineered 'hepato-liposomes': Combating liver-stage malaria in a single prophylactic dose

Primaquine continues to remain the gold standard molecule with an incumbent toxicity profile, as far as radical treatment of malaria is concerned. Better molecules are available at experimental level but their targeted delivery is a challenge. The present work identifies 'Decoquinate (DQN)' as a repurposed, safer drug molecule with a potential to function as an appealing replacement for primaquine active against liver-stage malaria. The work focuses on delivering the highly lipophilic DQN (log P ~ 5) in a liposomal carrier system to 'sporozoite infested hepatocytes' using two different in-house synthesized hepatotropic ligands. Functionally engineered 'hepato-liposomes' exhibit differences in their DQN loading capacities but no significant change in morphology or particle size and are also not affected by freeze drying. Two ligands, targeting different receptors on hepatocytes, have been compared for their in vitro and in vivo drug delivery efficiency in liver stage malaria. The studies reveal superior antimalarial efficacy of differently designed DQN loaded liposomes and demonstrate antimalarial efficacy at a low dose of 0.5 mg/kg for a repurposed molecule like DQN. The in vivo studies successfully discriminate the functional efficiency of the carriers and establish the importance of design in liposomal drug delivery for malarial prophylaxis.

Freeze-Drying of Pharmaceutical and Nutraceutical Nanoparticles: The Effects of Formulation and Technique Parameters on Nanoparticles Characteristics

Nanoparticles (NPs) are of the most interesting novel vehicles for effective drug delivery to humans. Freeze drying is known as an engaging process to improve the long lasting stability of NPs formulations. This study aims to elucidate the importance of various parameters involving in freeze-drying of the most common pharmaceutical/nutraceutical NPs including nanosuspensions, nanocrystals (NCs), cocrystals/nanococrystals, nanoemulsions (NEs), nanocapsules (NCPs) and nanospheres (NSPs). Regarding this, the therapeutic goals of NPs and specifications of drug must be considered. According to our survey, the most influential factors for achieving optimum results include type and concentration of cryoprotectant/lyoprotectant, stabilizer structure and concentration, the NPs concentration in solution, freezing, annealing, and drying rate, the interaction between protectants and stabilizer, solvent type and antisolvent to solvent ratio. The study shows that for each class of NPs, specific variables are of highest significance and should be optimized. For instance, about NCs, freezing rate and antisolvent/solvent ratio should be particularly considered and for emulsified NPs, the best results have been obtained by 5-20% of saccharides as cryoprotectants. These findings suggest that to obtain a product with the lowest aggregation and particle size (PS), optimization of the effective factors in formulation and lyophilization process are essential.

Formulation and In Vitro Evaluation of Casein Nanoparticles as Carrier for Celecoxib

Purpose: The objective of this work was to formulate casein (CAS) nanocarriers for the dissolution enhancement of poorly water soluble drug celecoxib (CLXB).

Methods: The CLXB loaded CAS nanocarriers viz., nanoparticles, reassembled CAS micelles and nanocapsules were prepared using sodium caseinate (SOD-CAS) as a carrier to enhance the solubility of CLXB. The prepared formulations were characterized for particle size, polydispersity index, zeta potential, percentage entrapment efficiency, and surface morphology for the selection of best formulation. Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction study was used to for the confirmation of encapsulation of CLXB. Further,in vitro drug dissolution, ex-vivo permeation studies on chicken ileum and stability studies were carried out.

Results: The CLXB loaded casein nanoparticles (CNP) (batch A2) showed a particle size diameter 216.1 nm, polydispersity index 0.422 with percentage entrapment efficiency of 90.71% and zeta potential of -24.6 mV. Scanning electron microscopy of suspension confirmed globular shape of CNP. Thein vitro release data of optimized batch followed non Fickian diffusion mechanism. The ex vivo permeation studies on chicken ileum of CLXB loaded CNP showed permeation through mucous membrane as compared to pure CLXB. The apparent permeability of best selected freeze dried CLXB loaded CNP (batch A2) was higher and gradually increased from 0.90 mg/cm² after 10 min to a maximum of 1.95 mg/cm² over the subsequent 90 min. A higher permeation was recorded at each time point than that of the pure CLXB.

Conclusion: The study explored the potential of CAS as a carrier for solubility enhancement of poorly water soluble drugs.

Photo-responsive degradable hollow mesoporous organosilica nanoplatforms for drug delivery

BACKGROUND

Stimulus-responsive degradable mesoporous organosilica nanoparticles (MONs) have shown great promise as drug carriers via enhancing the efficiency of drug delivery and accelerating the degradation of nanocarriers. However, it remains a great challenge to develop novel light-enabled spatial and temporal degradable MONs with both superior responsiveness for efficient anti-cancer drug delivery and safe exocytosis.

RESULTS

We report a novel photo-responsive degradable hollow mesoporous organosilica nanoplatform (HMONs@GOQD). The platform is based on organosilica nanoparticles (HMONs) containing singlet oxygen (¹O₂)-responsive bridged organoalkoxysilanes and wrapped graphene oxide quantum dots (GOQDs). The unique hollow mesoporous structure of the HMONs guarantees an excellent drug loading and release profile. During light irradiation, ¹O₂ produced by the GOQDs leads to the degradation of the organosilica nanoparticles, resulting in enhanced local drug release.

CONCLUSIONS

We carried out in vitro and in vivo experiments using DOX as a model drug; DOX-HMONs@GOQDs exhibited high biocompatibility, accelerated degradation, and superior therapeutic efficacy during light irradiation, indicating a promising platform for clinical cancer therapy.

Nanoformulation-by-design: an experimental and molecular dynamics study for polymer coated drug nanoparticles

The formulation of drug compounds into nanoparticles has many potential advantages in enhancing bioavailability and improving therapeutic efficacy. However, few drug molecules will assemble into stable, well-defined nanoparticulate structures. Amphiphilic polymer coatings are able to stabilise nanoparticles, imparting defined surface properties for many possible drug delivery applications. In the present article we explore, both experimentally and in silico, a potential methodology to coat drug nanoparticles with an amphiphilic co-polymer. Monomethoxy polyethylene glycol-polycaprolactone (mPEG-b-PCL) diblock copolymers with different mPEG lengths (M w 350, 550, 750 and 2000), designed to give different levels of colloidal stability, were used to coat the surface of indomethacin nanoparticles. Polymer coating was achieved by a flow nanoprecipitation method that demonstrated excellent batch-to-batch reproducibility and resulted in nanoparticles with high drug loadings (up to 78%). At the same time, in order to understand this modified nanoprecipitation method at an atomistic level, large-scale all-atom molecular dynamics simulations were performed in parallel using the GROMOS53a6 forcefield parameters. It was observed that the mPEG-b-PCL chains act synergistically with the acetone molecules to dissolve the indomethacin nanoparticle while after the removal of the acetone molecules (mimicking the evaporation of the organic solvent) a polymer-drug nanoparticle was formed (yield 99%). This work could facilitate the development of more efficient methodologies for producing nanoparticles of hydrophobic drugs coated with amphiphilic polymers. The atomistic insight from the MD simulations in tandem with the data from the drug encapsulation experiments thus leads the way to a nanoformulation-by-design approach for therapeutic nanoparticles.

Developing Biodegradable Nanoparticles Loaded with Mometasone Furoate for Potential Nasal Drug Delivery

Intranasal drug administration is considered a routine in the treatment of many nasal conditions including chronic rhinosinusitis (CRS), which is a common disease involving long-term inflammation of the nasal mucosa. Topical nasal steroid treatment is safe and easy to use and plays a basic role in both nonsurgical and surgical treatments for CRS. Intranasal steroid therapy for various time intervals is commonly used before and after endoscopic CRS nasal surgeries to reduce inflammation and edema and to improve mucosal healing. The medication is currently administered via conventional nasal sprays; therefore, there is an incentive to develop more efficient drug delivery systems for the controlled release of topical steroids into the sinonasal cavities over a prolonged period of time. In this study, poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) loaded with mometasone furoate (MF) were generated using the nanoprecipitation method and characterized physicochemically and morphologically. MF NPs exhibited adequate physicochemical properties and high drug encapsulation efficiency and loading content. MF exhibited sustained release from NPs over 7 days in vitro with an initial burst release; various mathematical models were applied to determine the kinetics of drug release. Having demonstrated the ability to load MF in PLGA-NPs using the nanoprecipitation method for the first time, these NPs urge the need for additional investigations to demonstrate their therapeutic potential in nasal delivery applications.

PLGA nanoparticle preparations by emulsification and nanoprecipitation techniques: effects of formulation parameters

This study presents the influence of the primary formulation parameters on the formation of poly-dl-lactic-co-glycolic nanoparticles by the emulsification-solvent evaporation, and the nanoprecipitation techniques. In the emulsification-solvent evaporation technique, the polymer and tensoactive concentrations, the organic solvent fraction, and the sonication amplitude effects were analyzed. Similarly, in the nanoprecipitation technique the polymer and tensoactive concentrations, the organic solvent fraction and the injection speed were varied. Additionally, the agitation speed during solvent evaporation, the centrifugation speeds and the use of cryoprotectants in the freeze-drying process were analyzed. Nanoparticles were characterized by dynamic light scattering, laser Doppler electrophoresis, and scanning electron microscopy, and the results were evaluated by statistical analysis. Nanoparticle physicochemical characteristics can be adjusted by varying the formulation parameters to obtain specific sizes and stable nanoparticles. Also, by adjusting these parameters, the nanoparticle preparation processes have the potential to be tuned to yield nanoparticles with specific characteristics while maintaining reproducible results.

Investigating Prime-Pull Vaccination through a Combination of Parenteral Vaccination and Intranasal Boosting

Formulation of inhalable delivery systems containing tuberculosis (TB) antigens to target the site of infection (lungs) have been considered for the development of subunit vaccines. Inert delivery systems such as poly (lactic-co-glycolic acid) (PLGA) are an interesting approach due to its approval for human use. However, PLGA suffers hydrolytic degradation when stored in a liquid environment for prolonged time. Therefore, in this study, nano- and microparticles composed of different PLGA copolymers (50:50, 75:25 and 85:15), sucrose (10% w/v) and L-leucine (1% w/v) encapsulating H56 TB vaccine candidate were produced as dried powders. In vitro studies in three macrophage cell lines (MH-S, RAW264.7 and THP-1) showed the ability of these cells to take up the formulated PLGA:H56 particles and process the antigen. An in vivo prime-pull immunisation approach consisting of priming with CAF01:H56 (2 × subcutaneous (s.c.) injection) followed by a mucosal boost with PLGA:H56 (intranasal (i.n.) administration) demonstrated the retention of the immunogenicity of the antigen encapsulated within the lyophilised PLGA delivery system, although no enhancing effect could be observed compared to the administration of antigen alone as a boost. The work here could provide the foundations for the scale independent manufacture of polymer delivery systems encapsulating antigens for inhalation/aerolisation to the lungs.

Pharmacokinetics, Biodistribution, and Anti-Angiogenesis Efficacy of Diamino Propane Tetraiodothyroacetic Acid-conjugated Biodegradable Polymeric Nanoparticle

The anti-angiogenic agent, diamino propane tetraiodothyroacetic acid (DAT), is a thyro-integrin (integrin αvβ3) antagonist anticancer agent that works via genetic and nongenetic actions. Tetraiodothyroacetic acid (tetrac) and DAT as thyroid hormone derivatives influence gene expression after they transport across cellular membranes. To restrict the action of DAT to the integrin αvβ3 receptors on the cell surface, we used DAT-conjugated PLGA nanoparticles (NDAT) in an active targeting mode to bind to these receptors. Preparation and characterization of NDAT is described, and both in vitro and in vivo experiments were done to compare DAT to NDAT. Intracellular uptake and distribution of DAT and NDAT in U87 glioblastoma cells were evaluated using confocal microscopy and showed that DAT reached the nucleus, but NDAT was restricted from the nucleus. Pharmacokinetic studies using LC-MS/MS analysis in male C57BL/6 mice showed that administration of NDAT improved the area under the drug concentration curve AUC(0-48 h) by 4-fold at a dose of 3 mg/kg when compared with DAT, and Cmax of NDAT (4363 ng/mL) was 8-fold greater than that of DAT (548 ng/mL). Biodistribution studies in the mice showed that the concentrations of NDAT were higher than DAT/Cremophor EL micelles in heart, lung, liver, spleen, and kidney. In another mouse model using female NCr nude homozygous mice with U87 xenografts, tumor growth was significantly decreased at doses of 1 and 3 mg/kg of NDAT. In the chick chorioallantoic membrane (CAM) assay used to measure angiogenesis, DAT (500 ng/CAM) resulted in 48% inhibition of angiogenesis levels. In comparison, NDAT at low dose (50 ng/CAM) showed 45% inhibition of angiogenesis levels. Our investigation of NDAT bridges the study of polymeric nanoparticles and anti-angiogenic agents and offers new insight for the rational design of anti-angiogenic agents.

Targeted Delivery of Surface-Modified Nanoparticles: Modulation of Inflammation for Acute Lung Injury

Nanocarriers have been widely employed in the diagnosis and treatment of various diseases. The drug release kinetics and pharmacodynamics could be adjusted by changing the materials, designs, and physicochemical properties of the carriers. Furthermore, the carrier surface could be modified to minimize the particle clearance, increase the circulation duration, escape the biological protective mechanisms, penetrate through physical barriers, and prolong the residence of the drug at the target site. Among lung diseases, acute lung injury has been considered life-threatening with approximately 190,000 cases and 74,500 deaths per year in the USA. Numerous researches have reported the efficacy of drug-encapsulated nanoparticles in the treatment of acute lung injury. The use of nanoparticles could help minimize the effect of airway defenses in the lung, thus provides a prolonged retention, sustained drug release, and targeted delivery to the lung tissues. Meanwhile, the toxicity of nanoparticles in the lungs needs to be investigated thoroughly to alleviate the safety concerns. In this chapter, we discuss the targeted pulmonary delivery of surface-modified nanocarriers to efficiently treat acute lung injury.

Solvent-free synthesis of acetylated cashew gum for oral delivery system of insulin

Cashew gum (CG) is a biopolymer that presents a favorable chemical environment for structural modifications, which leads to more stable and resistant colloidal systems. The gum was subjected to an acetylation reaction using a fast, simple, solvent-free and low cost methodology. The derivative was characterized by infrared and NMR spectroscopy, elemental analysis, coefficient of solubility and zeta potential. The modified biopolymer was used as a platform for drug delivery systems using insulin as a model drug. Nanoparticles were developed through the technique of polyelectrolytic complexation and were characterized by size, surface charge, entrapment efficiency and gastrointestinal release profile. The nanoparticles presented size of 460 nm with a 52.5% efficiency of entrapment of insulin and the electrostatic stabilization was suggested by the zeta potential of + 30.6 mV. Sustained release of insulin was observed for up to 24 h. The results showed that acetylated cashew gum (ACG) presented potential as a vehicle for sustained oral insulin release.

Spray coating of foley urinary catheter by chlorhexidine-loadedpoly(ε-caprolactone) nanospheres: effect of lyoprotectants, characteristics, and antibacterial activity evaluation

In this study, chlorhexidine-loaded poly(ε-caprolactone) nanospheres (CHX-NS) were prepared and successfully coated on the urinary catheters. Properties of CHX-NS were evaluated including drug loading content and the nanosphere size. Effects of different lyoprotectants for long-term storage of CHX-NS were also investigated. In vitro release study and antibacterial activity were also conducted using 20 cycles coated-urinary catheters. Results showed that the high-pressure emulsification-solvent evaporation technique provided the drug loading content at 1.14 ± 0.16% and the size of nanospheres was 152 ± 37 nm. The suitable lyoprotectant for long-term storage of CHX-NS was sucrose which provided noticeably no aggregation at the degree of reconstitution at 89.95%. The amount of CHX loading on coated catheters was at 4.55 ± 0.31 mg. Drug release from the coated catheters in artificial urine could be prolonged up to 2 weeks and bacteria proliferation was inhibited up to 14 days. These results suggest that the antimicrobial activity of CHX-NS reduces the adherence of the uropathogens to the catheter surface. Chlorhexidine-loaded polymeric nanospheres were fabricated which can be successfully coated on urinary catheters. These systems have potential use for prolonged antimicrobial applications.

Lactobionic/Folate Dual-Targeted Amphiphilic Maltodextrin-Based Micelles for Targeted Codelivery of Sulfasalazine and Resveratrol to Hepatocellular Carcinoma

In this study, promising approaches of dual-targeted micelles and drug-polymer conjugation were combined to enable injection of poorly soluble anticancer drugs together with site-specific drug release. Ursodeoxycholic acid (UDCA) as a hepatoprotective agent was grafted to maltodextrin (MD) via carbodiimide coupling to develop amphiphilic maltodextrin-ursodeoxycholic acid (MDCA)-based micelles. Sulfasalazine (SSZ), as a novel anticancer agent, was conjugated via a tumor-cleavable ester bond to MD backbone to obtain tumor-specific release, whereas resveratrol (RSV) was physically entrapped within the hydrophobic micellar core. For maximal tumor-targeting, both folic acid (FA) and lactobionic acid (LA) were coupled to the surface of micelles to obtain dual-targeted micelles. The decrease of critical micelle concentration (CMC) from 0.012 to 0.006 mg/mL declares the significance of a dual hydrophobicized core of micelles by both UDCA and SSZ. The dual-targeted micelles showed a great hemocompatibility, as well as enhanced cytotoxicity and internalization into HepG-2 liver cancer cells via binding to overexpressed folate and asialoglycoprotein receptors. In vivo, the micelles demonstrated superior antitumor effects revealed as reduction in the liver/body weight ratio, inhibition of angiogenesis, and enhanced apoptosis. Overall, combined strategies of dual active targeted micelles with bioresponsive drug conjugation could be utilized as a promising approach for tumor-targeted drug delivery.

Lyophilization and stability of antibody-conjugated mesoporous silica nanoparticle with cationic polymer and PEG for siRNA delivery

Introduction

Long-term stability of therapeutic candidates is necessary toward their clinical applications. For most nanoparticle systems formulated in aqueous solutions, lyophilization or freeze-drying is a common method to ensure long-term stability. While lyophilization of lipid, polymeric, or inorganic nanoparticles have been studied, little has been reported on lyophilization and stability of hybrid nanoparticle systems, consisting of polymers, inorganic particles, and antibody. Lyophilization of complex nanoparticle systems can be challenging with respect to preserving physicochemical properties and the biological activities of the materials. We recently reported an effective small-interfering RNA (siRNA) nanoparticle carrier consisting of 50-nm mesoporous silica nanoparticles decorated with a copolymer of polyethylenimine and polyethyleneglycol, and antibody.

Materials and methods

Toward future personalized medicine, the nanoparticle carriers were lyophilized alone and loaded with siRNA upon reconstitution by a few minutes of simple mixing in phosphate-buffered saline. Herein, we optimize the lyophilization of the nanoparticles in terms of buffers, lyoprotectants, reconstitution, and time and temperature of freezing and drying steps, and monitor the physical and chemical properties (reconstitution, hydrodynamic size, charge, and siRNA loading) and biological activities (gene silencing, cancer cell killing) of the materials after storing at various temperatures and times.

Results

The material was best formulated in Tris-HCl buffer with 5% w/w trehalose. Freezing step was performed at −55°C for 3 h, followed by a primary drying step at −40°C (100 µBar) for 24 h and a secondary drying step at 20°C (20 µBar) for 12 h. The lyophilized material can be stored stably for 2 months at 4°C and at least 6 months at −20°C.

Conclusion

We successfully developed the lyophilization process that should be applicable to other similar nanoparticle systems consisting of inorganic nanoparticle cores modified with cationic polymers, PEG, and antibodies.

Nanocrystal-based drug delivery system of risperidone: lyophilization and characterization

OBJECTIVE

In the present work nanocrystal-based formulation of risperidone (RIS) was proposed to overcome solubility issue of RIS, while lyophilization technique was used effectively, for conversion of RIS nanosuspension to solid state.

SIGNIFICANCE

RIS nanosuspension was developed and stabilized with a combination of polycaprolactone and Pluronic^® F-68 as stabilizers. With focus on critical parameters like nature of cryoprotectants and effect of eutectic temperature on properties of nanosuspension, the suitability of lyophilization technique in improving the physical stability of prepared nanosuspension was also evaluated. Additionally, the developed nanocrystals were also assessed for their solid states properties.

METHODS

Various process parameters affecting average particle size and polydispersity index (PDI), viz. drug to surfactant ratio, solvent to anti-solvent ratio, stirring speed, type of stabilizer were optimized. Assessment of lyophilization as a suitable solidification technique (for conversion to powder form) was done with selective cryoprotectants (trehalose dihydrate and sorbitol).

RESULTS

The formulation was found to be stable at 4 °C for 3 months with size, PDI and zeta potential of 214 ± 3.4 nm, 0.120, and -10.2 ± 0.90 mV, respectively. Release profile of developed nanosuspension showed cumulative % release of ∼90% in initial 10 h whereas the value for the unprocessed drug was ∼11% in same time frame.

CONCLUSIONS

These findings suggest that developed formulation was able to enhance water solubility of the drug effectively and can be potentially used in the management of psychotic disorders.

Antiproliferative Activity and VEGF Expression Reduction in MCF7 and PC-3 Cancer Cells by Paclitaxel and Imatinib Co-encapsulation in Folate-Targeted Liposomes

Co-encapsulation of anticancer drugs paclitaxel and imatinib in nanocarriers is a promising strategy to optimize cancer treatment. Aiming to combine the cytotoxic and antiangiogenic properties of the drugs, a liposome formulation targeted to folate receptor co-encapsulating paclitaxel and imatinib was designed in this work. An efficient method was optimized for the synthesis of the lipid anchor DSPE-PEG(2000)-folic acid (FA). The structure of the obtained product was confirmed by RMN, FT-IR, and ESI-MS techniques. A new analytical method was developed and validated for simultaneous quantification of the drugs by liquid chromatography. Liposomes, composed of phosphatidylcholine, cholesterol, and DSPE-mPEG(2000), were prepared by extrusion. Their surface was modified by post-insertion of DSPE-PEG(2000)-FA. Reaction yield for DSPE-PEG(2000)-FA synthesis was 87%. Liposomes had a mean diameter of 122.85 ± 1.48 nm and polydispersity index of 0.19 ± 0.01. Lyophilized formulations remained stable for 60 days in terms of size and drug loading. FA-targeted liposomes had a higher effect on MCF7 cell viability reduction (p < 0.05) when compared with non-targeted liposomes and free paclitaxel. On PC-3 cells, viability reduction was greater (p < 0.01) when cells were exposed to targeted vesicles co-encapsulating both drugs, compared with the non-targeted formulation. VEGF gene expression was reduced in MCF7 and PC-3 cells (p < 0.0001), with targeted vesicles exhibiting better performance than non-targeted liposomes. Our results demonstrate that multifunctional liposomes associating molecular targeting and multidrug co-encapsulation are an interesting strategy to achieve enhanced internalization and accumulation of drugs in targeted cells, combining multiple antitumor strategies.

Rapid, Room Temperature Nanoparticle Drying and Low-Energy Reconstitution via Electrospinning

Nanoparticle formulations offer advantages over free drugs; however, stability of the nanoparticle dispersions is a significant obstacle, and drying is often required for long-term size stability. The main limitation of current drying methods is particle aggregation upon reconstitution which can be overcome with sonication (impractical in a clinical setting) or large amounts of cryoprotectants (result in hypertonic dispersions). Therefore, new approaches to nanoparticle drying are necessary. We demonstrate conversion of nanoparticle dispersions to a dry, thermostable form via electrospinning. As a proof-of-concept, polyethylene glycol stabilized nanoparticles and polyvinyl alcohol were blended and electrospun into ∼300 nm fibers. Following electrospinning, nanoparticles were stored for at least 7 months and redispersed with low osmolarity to their original size without sonication. The nanoparticles redisperse to their original size when the fiber diameter and nanoparticle diameter are comparable (nanoparticle:nanofiber ratio ∼1). Nanoparticles with liquid cores and larger particles better maintained their size when compared to nanoparticles with solid cores and smaller particles, respectively. Storing the nanoparticles within nanofibers appears to prevent Ostwald ripening improving thermostability. Overall, this novel approach enables rapid, continuous drying of nanoparticles at room temperature to facilitate long-term nanoparticle storage. Improved nanoparticle drying techniques will enhance clinical translation of nanomedicines.

Degradability and Clearance of Silicon, Organosilica, Silsesquioxane, Silica Mixed Oxide, and Mesoporous Silica Nanoparticles

The biorelated degradability and clearance of siliceous nanomaterials have been questioned worldwide, since they are crucial prerequisites for the successful translation in clinics. Typically, the degradability and biocompatibility of mesoporous silica nanoparticles (MSNs) have been an ongoing discussion in research circles. The reason for such a concern is that approved pharmaceutical products must not accumulate in the human body, to prevent severe and unpredictable side-effects. Here, the biorelated degradability and clearance of silicon and silica nanoparticles (NPs) are comprehensively summarized. The influence of the size, morphology, surface area, pore size, and surface functional groups, to name a few, on the degradability of silicon and silica NPs is described. The noncovalent organic doping of silica and the covalent incorporation of either hydrolytically stable or redox- and enzymatically cleavable silsesquioxanes is then described for organosilica, bridged silsesquioxane (BS), and periodic mesoporous organosilica (PMO) NPs. Inorganically doped silica particles such as calcium-, iron-, manganese-, and zirconium-doped NPs, also have radically different hydrolytic stabilities. To conclude, the degradability and clearance timelines of various siliceous nanomaterials are compared and it is highlighted that researchers can select a specific nanomaterial in this large family according to the targeted applications and the required clearance kinetics.