Studies on the effect of pilocarpine incorporation into a submicron emulsion on the stability of the drug and the vehicle

PEGylated lipid microspheres loaded with cabazitaxel for intravenous administration: stability, bioavailability, antitumor efficacy, and toxicity

This paper aimed to develop a novel lipid microsphere delivering cabazitaxel (CTX) using phosphatidylcholine combined with DSPE-PEG2000 as emulsifier, and evaluate its stability, pharmacokinetics, antitumor efficacy, and toxicity. The pegylated cabazitaxel-loaded lipid microspheres (CTX-PLMs) were prepared by high-pressure homogenization methods; the biological samples were analyzed by the UPLC-MS/MS method. CTX-PLMs had a drug concentration of 1.2 mg/ml and a mean particle size of 180.0 ± 51.119 nm. CTX-PLMs showed a superior physical stability as it could remain nearly intact after 1-year storage. The AUC_0-t of the CTX-PLMs was 1562.6 ± 520.1 μg h L^-1 compared with the CTX-solution of 860.734 ± 312.4 μg h L^-1. CTX-PLMs exhibited a strong antitumor efficacy against NCI-N87 and DU145 tumor models with tumor growth inhibition rates of 93.5 and 88.5%, respectively. The LD50 of CTX-PLMs in rats was 20.89 mg/kg. As for the long-term toxicity, the thymus, mesenteric lymph nodes, and bone marrow were the main toxic target organs and systemic toxicity induced by CTX-PLMs was alleviated relative to that of the CTX-solution. Safety assessment studies including hemolysis test, dermal sensitization test, systemic anaphylaxis, and vascular stimulation test indicated that CTX-PLMs is safe enough for intravenous administration. In a word, CTX-PLMs are a promising carrier for intravenous administration with satisfactory stability, stronger tumor inhibition, and superior safety profile.

Nanotherapies for the treatment of ocular diseases

The topical route is the most frequent and preferred way to deliver drugs to the eye. Unfortunately, the very low ocular drug bioavailability (less than 5%) associated with this modality of administration, makes the efficient treatment of several ocular diseases a significant challenge. In the last decades, it has been shown that specific nanocarriers can interact with the ocular mucosa, thereby increasing the retention time of the associated drug onto the eye, as well as its permeability across the corneal and conjunctival epithelium. In this review, we comparatively analyze the mechanism of action and specific potential of the most studied nano-drug delivery carriers. In addition, we present the success achieved until now using a number of nanotherapies for the treatment of the most prevalent ocular pathologies, such as infections, inflammation, dry eye, glaucoma, and retinopathies.

Phospholipids at the interface: current trends and challenges

Phospholipids are one of the major structural elements of biological membranes. Due to their amphiphilic character, they can adopt various molecular assemblies when dispersed in water, such as bilayer vesicles or micelles, which give them unique interfacial properties and render them very attractive in terms of foam or emulsion stabilization. This article aims at reviewing the properties of phospholipids at the air/water and oil/water interfaces, as well as the recent advances in using these natural components as stabilizers, alone or in combination with other compounds such as proteins. A discussion regarding the challenges and opportunities offered by phospholipids-stabilized structure concludes the review.

Ciprofloxacin surf-plexes in sub-micron emulsions: a novel approach to improve payload efficiency and antimicrobial efficacy

The aim of this study was to investigate antimicrobial efficacy and pharmacokinetic profile of ciprofloxacin (CFn) loaded oil-in-water (o/w) submicron emulsion (SE-CFn). This study emphasized on development of hydrophobic ion-pair complexes of CFn with sodium deoxycholate (SDC) [CFn-SDC], which was incorporated in the core of SE (SE-CFn-SDC). SE-CFn-SDC was characterized for globulet size (278±12 nm), zeta potential (-25.3±1 mV), viscosity (2.6±0.3 cP), transmission electron microscopy (TEM), drug entrapment and for in vitro release profile. The entrapment efficiency (EE) was significantly improved (≥80%; p≤0.05) on ion-pairing while it was merely 27.2±3.1% for free CFn. The cytotoxicity studies of formulations on J774 macrophage cells showed that more than 90±3% of cells were viable, even at high concentration (100 μg/ml). SE-CFn-SDC was further modified with cationic inducer chitosan (SE-CH-CFn-SDC), which showed almost twofold and fourfold enhancement in antimicrobial efficacy as compared to SE-CFn-SDC and SE-CFn, respectively when tested in vitro against E. coli, S. aureus, and P. aeruginosa. When tested in male Balb/c mice, the AUC(0-24h) of SE-CH-CFn-SDC (23.27±2.8 h μg/ml) was found to be 1.7-fold and 5-fold higher as compared to SE-CFn-SDC (13.17±0.88 h μg/ml) and CFn solution (4.70±0.77 h μg/ml), respectively. The study demonstrates that surfactant based ionic complex formation incorporated in surface modified submicron emulsion is a promising approach to improve payload efficiency of poorly water soluble drugs with improved antimicrobial efficacy and pharmacokinetic profile.

Molecularly imprinted therapeutic contact lenses

IMPORTANCE OF THE FIELD

There exists a considerable unmet need for more efficacious delivery of ocular therapeutics. Contact lenses have been developed with high loading and controllable sustained release to overcome limited patient compliance and significant ocular transport limitations. This can best be achieved by extending and controlling the residence time of drugs on the eye surface and thereby limiting drug loss by lacrimation, drainage and non-productive absorption.

AREAS COVERED IN THE REVIEW

Within hydrogels, molecular imprinting can be used to create memory for template molecules embedded within a flexible macromolecular network. Control in therapeutic loading and delay of release have been demonstrated with careful attention to the functional monomer/template ratio, the diversity of functional monomers, and the polymer backbone and network structure. Experimental work has also confirmed that macromolecular memory and not structural differences or phenomena are responsible for delayed drug release kinetics compared with non-imprinted systems. A therapeutically relevant amount of drug can be loaded for release to occur over multiple days, which allows the technique to be applied to daily-wear and extended-wear contact lenses.

WHAT THE READER WILL GAIN

The focus of this article is to review the emerging field of molecularly imprinted contact lenses and highlight significant accomplishments, trends, as well as future strategies and directions.

TAKE HOME MESSAGE

In the past 8 years, molecular imprinting has been used to produce therapeutic contact lenses with enhanced loading and delayed release. Progress in the field has mostly included low-molecular-weight therapeutics such as anti-glaucoma, antihistamine, antibiotic and anti-inflammatory therapeutics used to treat anterior eye disorders. Recently, high molecular weight comfort molecules have also been successfully demonstrated. Current methods can produce lenses of suitable thickness, water content, and mechanical and optical properties compared with commercial lenses on the market today.

Preparation of ergoloid mesylate submicron emulsions for enhancing nasal absorption and reducing nasal ciliotoxicity

The aim of this investigation was to prepare ergoloid mesylate submicron emulsions (EMSEs) for enhancing nasal absorption of drug and reducing nasal ciliotoxicity. Following intranasal administrations of EMSE and ergoloid mesylate solution (EMS) and intravenous administration of EMS to rats separately at the dose of 2 mg kg(-1), the levels of EM in blood and the cerebrospinal fluid (CSF) were evaluated by microdialysis method. The nasal ciliotoxicity was evaluated by using in situ toad palate model. The absolute bioavailability and the AUC in the CSF following intranasal administration of EMSE (56.3 +/- 5.3%, AUC(CSF) 28,594 +/- 5680 ng ml(-1) min) were statistically higher than those after intranasal administration of EMS (47.4 +/- 3.5%, AUC(CSF) 19,870 +/- 2247 ng ml(-1) min). No significant difference was found for the value of the brain drug direct transport percentage (DTP%) or the drug targeting efficiency (DTE) between the group receiving EMSE and the group receiving EMS. In conclusion, EMSE exhibited higher nasal absorption of EM in rats and significantly lower nasal ciliotoxicity whereas no greater brain-targeting efficiency in comparison with EMS.

Type I hypersensitivity in an asthmatic child allergic to peanuts: was soy lecithin to blame?

BACKGROUND

Soy lecithin is widely used as an emulsifier, not only in topical skin care products but also in various drugs administered either topically, orally, or intravenously or by inhalation. Patients strongly allergic to soy and/or peanuts can develop an anaphylactic reaction when exposed to soy lecithin.

METHOD

We report a 3-year-old asthmatic boy, allergic to peanuts, who was treated at the emergency department for an exacerbation of asthma following an upper respiratory tract infection. Within an hour after receiving the second of two inhalations of an ipratropium bromide (Atrovent) metered dose inhaler, he developed respiratory distress and generalized urticaria, an adverse event that regressed within 48 hours of withdrawal of the suspected drug. Soy lecithin, contained as an excipient in the metered dose inhaler, was strongly suspected of being responsible for this reaction.

CONCLUSION

Drug products containing soy lecithin can cause severe allergic reactions in patients allergic to peanuts or soy. Physicians should be aware that adverse drug reactions can be due to both the active medical component and the excipient ingredients.

Solubility, uptake and biocompatibility of lutein and zeaxanthin delivered to cultured human retinal pigment epithelial cells in tween40 micelles

Carotenoids lutein and zeaxanthin are proposed to protect ocular tissues from free-radical damage that can cause cataract and age-related macular degeneration (AMD). They accumulate selectively in the lens and macular region of the retina. Changes in the retinal pigment epithelium are characteristic in AMD. Efficient uptake is essential to study the intracellular effects of carotenoids in cell cultures. For in vitro experiments carotenoids are often dissolved in organic solvents like tetrahydrofuran (THF), dimethylsulfoxide (DMSO) and n-hexane, but difficulties have been associated with these application methods. Recently, O'Sullivan et al. (SM O'Sullivan et al., Br J Nutr 91 (2004) 757) developed a method whereby carotenoids could be delivered to cultured cells without the cytotoxic side effects often observed when organic solvents are used. We modified this method and investigated the effects of different carotenoid-formulations (ethanol/Tween40, methanol/tween40 and acetone/Tween40) on the uptake of lutein and zeaxanthin by differentiated ARPE-19 cells, cell viability and the expression of the "stress" gene HO-1, which is easily induced by a range of stimuli including chemical and physical agents. Micelle formulations prepared with ethanol/Tween40 resulted in the lowest LDH release, the highest carotenoid uptake and the lowest stress response (changes in HO-1 mRNA expression).

The potential of lipid emulsion for ocular delivery of lipophilic drugs

For nearly a decade, oil-in-water lipid emulsions containing either anionic or cationic droplets have been recognized as an interesting and promising ocular topical delivery vehicle for lipophilic drugs. The aim of this review is to present the potential of lipid emulsions for ocular delivery of lipophilic drugs. The review covers an update on the state of the art of incorporating the lipophilic drugs, a brief description concerning the components and the classification of lipid emulsions. The ocular fate following topical instillation, safety evaluation experiments and the applications of lipid emulsions are thoroughly discussed.

Use of Tween 40 and Tween 80 to deliver a mixture of phytochemicals to human colonic adenocarcinoma cell (CaCo-2) monolayers

Epidemiological evidence suggests that dietary intake of carotenoids and tocopherols may influence the risk of certain chronic diseases, such as cancer and CVD. In vitro studies investigating the synergistic effects of mixtures of carotenoids and tocopherols have been hindered due to the difficulty of solubilising these lipophilic compounds. The objective of the present study was to develop a system for delivering tocopherols and carotenoids simultaneously to cells in culture. Differentiated human colonic adenocarcinoma cells (CaCo-2) were incubated with a mixture of these phytochemicals for 24 h. The phytochemical mixture included carotenoids (astaxanthin, canthaxanthin, lutein, lycopene, alpha-carotene, beta-carotene) and tocopherols (alpha-tocopherol and gamma-tocopherol). The emulsifiers polyoxyethylene sorbitan monopalmitate (Tween 40) and polyoxyethylene sorbitan monooleate (Tween 80) were employed as the delivery vehicles, and were compared with tetrahydrofuran (THF). Each vehicle was added at a maximum concentration of 1 ml/l. No toxic effects to the CaCo-2 cells were noted when Tween 40 or Tween 80 were used. Both Tween 40 and Tween 80 resulted in greater solubility of the mixture and delivered substantially more carotenoids and tocopherols to the cells than THF. In particular, lycopene was detected within the cells when Tween 40 and Tween 80 were employed, whereas it was below the limits of detection by HPLC when THF was used as the delivery vehicle. The phytochemicals were retained within the cells for 24 h after supplementation. Tween 40 and Tween 80 have potential as simple, rapid and non-toxic methods for delivering mixtures of carotenoids and tocopherols to cells in culture.

Physicochemical screening of antimicrobial agents as potential preservatives for submicron emulsions

Antimicrobial agents should be added to lecithin-stabilized submicron emulsions when these preparations are non-sterile products or when packed in multidose containers. Eleven antimicrobials were introduced to a standard submicron emulsion. The emulsions were adjusted to pH 5.0 or 8.2 prior aseptic filtration or thermal sterilization, respectively. The physicochemical stability of the preparations was observed during storage for 2 years at room temperature. Parabens showed the best compatibility but satisfying stability was also observed in emulsions containing phenylethanol, m-cresol and benzalkonium chloride. Partitioning studies revealed poor correlation between aqueous solubility and content of the preservatives in the aqueous phase of the emulsion. Only 1.2% of the total content of benzalkonium chloride was found in this phase and incorporation of this compound into different microscopic structures of the emulsion is proposed as a reason for such effect. Preliminary studies on the efficacy of antimicrobial preservation was performed for emulsions containing parabens, benzalkonium chloride or chlorocresol and the negative results bring conclusion that higher concentration of antimicrobials or their combination may be required for efficient preservation of submicron emulsions.

In vivo evaluation of submicron emulsions with pilocarpine: the effect of pH and chemical form of the drug

Submicron emulsions containing 2.0% w/v pilocarpine as pilocarpine HCl, soybean oil (10% w/v) and egg lecithin (1.2% w/v) were formulated. Emulsions at pH 5.0, 6.5 and 8.5 were applied to the rabbit's eye, and the reduction in pupil diameter was measured for 6 h. The miotic effect was compared with that obtained with aqueous solutions at the same pH. A prolonged miotic effect was observed when the submicron emulsion was used as a vehicle. After application of emulsions at pH 5.0, 6.5 or 8.5, the time when 20% reduction of pupil diameter was still observed was 3.9 +/- 1.1 h, 4.3 +/- 1.3 h and 5.3 +/- 0.8 h, respectively, while, after application of a solution, this parameter was shorter by 30-40%. AUC(0-6h) values were larger after application of the submicron emulsions in comparison to aqueous solutions; however, statistically significant differences were only observed for emulsions at pH 6.5. Although the bioavailability of the drug is pH dependent, emulsions at higher pH cannot be considered for clinical use because of pilocarpine degradation which occurs with a similar rate as in aqueous solutions. Introduction of pilocarpine into the oily phase in the form of pilocarpine base or its oleate did not improve either the physicochemical or the pharmacological properties of the formulations. Irrespective of the pH and chemical form of pilocarpine used for emulsion preparation, practically all drug was found in the aqueous phase of the emulsion; thus, partitioning to the oily phase was negligible.

Increased partitioning of pilocarpine to the oily phase of submicron emulsion does not result in improved ocular bioavailability

Submicron emulsions containing pilocarpine as ion-pair with mono-dodecylphosphoric acid were prepared. Physical stability of these preparations was confirmed during 4 months of storage at 4 degrees C. Approximately 50% of the drug was found in the aqueous phase of emulsion separated using an ultrafiltration technique, while the rest was present in the oily phase and interphase. The miotic effect observed in rabbits after application of the ion-pair in aqueous solution or in submicron emulsion was the same; indicating that the drug distribution into the oily phase of the colloidal vehicle does not improve ocular bioavailability.

Hydroxypropylmethylcellulose (HPMC) as emulsifier for submicron emulsions: influence of molecular weight and substitution type on the droplet size after high-pressure homogenization

Hydroxypropylmethylcellulose (HPMC) is a known emulsifier as well as a common viscosity enhancer in eye drops. Therefore, HPMC stabilized emulsions appear as interesting drug carriers for ophthalmic use and as a suitable treatment of dry eye syndrome. Since submicron emulsions are known to have an improved drug delivery, attempts were made to reduce the emulsion's droplet size by high-pressure homogenization. Droplet size was dependent on the homogenization pressure and the polymer content. Differences were found between emulsions stabilized with higher and lower molecular weight HPMC. Smaller droplet sizes were obtained with the shorter chained HPMC. No considerable influence of the substitution type was observed.