Hydrolysis of rice hull by crosslinked Aspergillus niger cellulase

Simultaneous production of cellulase and ferulic acid esterase by Penicillium decumbens with rice straw as the sole carbon source

As well as cellulose and hemicelluloses, rice straw contains phenolic acids. The simultaneous production of monosaccharides and phenolic acids could improve the value of rice straw. In this study, it was confirmed that Penicillium decumbens produces more ferulic acid esterase (FAE) than other cellulase-producing fungi. Cellulose, destarched wheat bran (DSWB), and rice straw were used as carbon sources. Little phenolic acid was released by cellulose- and DSWB-based enzymes during the saccharification of rice straw, whereas rice straw was a favorable carbon source for the simultaneous production of cellulase and FAE. High-performance liquid chromatography showed that during enzyme production, phenolic acids were released from rice straw, and ball-milling affected this release of phenolic acids. Small amounts of phenolic acids induced FAE production. Although the enzymes produced with rice straw showed lower FAE activity than those produced with DSWB, phenolic acids were produced efficiently during the saccharification of rice straw in response to the synergistic effects of cellulase and FAE. Therefore, we suggest that the production of enzymes by P. decumbens on rice straw as the sole carbon source will allow the production of more valuable products from rice straw, making the utilization of rice straw more economic.

Production Process and Optimization of Solid Bioethanol from Empty Fruit Bunches of Palm Oil Using Response Surface Methodology

This study aimed to observe the potential of solid bioethanol as an alternative fuel with high caloric value. The solid bioethanol was produced from liquid bioethanol, which was obtained from the synthesis of oil palm empty fruit bunches (PEFBs) through the delignification process by using organosolv pretreatment and enzymatic hydrolysis. Enzymatic hydrolysis was conducted using enzyme (60 FPUg−1 of cellulose) at a variety of temperatures (35 °C, 70 °C, and 90 °C) and reaction times (2, 6, 12, 18, and 24 h) in order to obtain a high sugar yield. The highest sugars were yielded at the temperature of 90 °C for 48 h (152.51 mg/L). Furthermore, fermentation was conducted using Saccharomyces cerevisiae. The bioethanol yield after fermentation was 62.29 mg/L. Bioethanol was extracted by distillation process to obtain solid bioethanol. The solid bioethanol was produced by using stearic acid as the additive. In order to get high-quality solid bioethanol, the calorific value was optimized using the response surface methodology (RSM) model. This model provided the factor variables of bioethanol concentration (vol %), stearic acid (g), and bioethanol (mL) with a minus result error. The highest calorific value was obtained with 7 g stearic acid and 5 mL bioethanol (43.17 MJ/kg). Burning time was tested to observe the quality of the solid bioethanol. The highest calorific value resulted in the longest burning time. The solid bioethanol has a potential as solid fuel due to the significantly higher calorific value compared to the liquid bioethanol.

Effectiveness of cross-linked enzyme aggregates of cellulolytic enzymes in hydrolyzing wheat straw

Development of industrially potent cellulolytic enzymes is one of the greatest challenges faced in lignocellulosic feed-stock based bio-refining. In the current work cross-linked enzyme aggregates (CLEAs) of commercial cellulase mix were successfully prepared and their performance to be used as potential industrial enzymes in terms of stability and wheat straw hydrolysis was evaluated. The CLEAs were more stable compared to native enzymes with half-lives being 2.30-, 1.56-, 3.07- and 1.67-fold higher at 70°C for filter paper activity (FPA), endoglucanase, β-glucosidase and xylanase, respectively. CLEAs retained 77.4% of endoglucanase and 85.9% of xylanase activity after five cycles of hydrolysis of soluble substrates such as carboxymethyl cellulose and xylan, respectively. A maximum saccharification yield of 31.8% by soluble enzymes and 32.9% by CLEAs were obtained when alkali-pretreated wheat straw was subjected to hydrolysis. On repeated batch hydrolysis for five consecutive cycles of 24 h each, the CLEAs showed an overall higher saccharification yield of 43.3% compared to 31.8% with soluble enzymes.

Suitability of magnetic nanoparticle immobilised cellulases in enhancing enzymatic saccharification of pretreated hemp biomass

BACKGROUND

Previous research focused on pretreatment of biomass, production of fermentable sugars and their consumption to produce ethanol. The main goal of the work was to economise the production process cost of fermentable sugars. Therefore, the objective of the present work was to investigate enzyme hydrolysis of microcrystalline cellulose and hemp hurds (natural cellulosic substrate) using free and immobilised enzymes. Cellulase from Trichoderma reesei was immobilised on an activated magnetic support by covalent binding and its activity was compared with that of the free enzyme to hydrolyse microcrystalline cellulose and hemp hurds on the basis of thermostability and reusability.

RESULTS

Up to 94% protein binding was achieved during immobilisation of cellulase on nanoparticles. Successful binding was confirmed using Fourier transform infrared spectroscopy (FTIR). The free and immobilised enzymes exhibited identical pH optima (pH 4.0) and differing temperature optima at 50°C and 60°C, respectively. The K M values obtained for the free and immobilised enzymes were 0.87 mg/mL and 2.6 mg/mL respectively. The immobilised enzyme retained 50% enzyme activity up to five cycles, with thermostability at 80°C superior to that of the free enzyme. Optimum hydrolysis of carboxymethyl cellulose (CMC) with free and immobilised enzymes was 88% and 81%, respectively. With pretreated hemp hurd biomass (HHB), the free and immobilised enzymes resulted in maximum hydrolysis in 48 h of 89% and 93%, respectively.

CONCLUSION

The current work demonstrated the advantages delivered by immobilised enzymes by minimising the consumption of cellulase during substrate hydrolysis and making the production process of fermentable sugars economical and feasible. The activity of cellulase improved as a result of the immobilisation, which provided a better stability at higher temperatures. The immobilised enzyme provided an advantage over the free enzyme through the reusability and longer storage stability properties that were gained as a result of the immobilisation.

Novel perspectives for evolving enzyme cocktails for lignocellulose hydrolysis in biorefineries

The unstable and uncertain availability of petroleum sources as well as rising cost of fuels have shifted global efforts to utilize renewable resources for the production of greener energy and a replacement which can also meet the high energy demand of the world. Bioenergy routes suggest that atmospheric carbon can be cycled through biofuels in carefully designed systems for sustainability. Significant potential exists for bioconversion of biomass, the most abundant and also the most renewable biomaterial on our planet. However, the requirements of enzyme complexes which act synergistically to unlock and saccharify polysaccharides from the lignocellulose complex to fermentable sugars incur major costs in the overall process and present a great challenge. Currently available cellulase preparations are subject to tight induction and regulation systems and also suffer inhibition from various end products. Therefore, more potent and efficient enzyme preparations need to be developed for the enzymatic saccharification process to be more economical. Approaches like enzyme engineering, reconstitution of enzyme mixtures and bioprospecting for superior enzymes are gaining importance. The current scenario, however, also warrants the need for research and development of integrated biomass production and conversion systems.

Proteomic analysis of temperature dependent extracellular proteins from Aspergillus fumigatus grown under solid-state culture condition

Fungal species of the genus Aspergillus are filamentous ubiquitous saprophytes that play a major role in lignocellulosic biomass recycling and also are considered as cell factories for the production of organic acids, pharmaceuticals, and industrially important enzymes. Analysis of extracellular secreted biomass degrading enzymes using complex lignocellulosic biomass as a substrate by solid-state fermentation could be a more practical approach to evaluate application of the enzymes for lignocellulosic biorefinery. This study isolated a fungal strain from compost, identified as Aspergillus fumigatus, and further analyzed it for lignocellulolytic enzymes at different temperatures using label free quantitative proteomics. The profile of secretome composition discovered cellulases, hemicellulases, lignin degrading proteins, peptidases and proteases, and transport and hypothetical proteins; while protein abundances and further their hierarchical clustering analysis revealed temperature dependent expression of these enzymes during solid-state fermentation of sawdust. The enzyme activities and protein abundances as determined by exponentially modified protein abundance index (emPAI) indicated the maximum activities at the range of 40-50 °C, demonstrating the thermophilic nature of the isolate A. fumigatus LF9. Characterization of the thermostability of secretome suggested the potential of the isolated fungal strain in the production of thermophilic biomass degrading enzymes for industrial application.

Thermostable, haloalkaline cellulase from Bacillus halodurans CAS 1 by conversion of lignocellulosic wastes

An extracellular thermostable, haloalkaline cellulase by bioconversion of lignocellulosic wastes from Bacillus halodurans CAS 1 was purified to homogeneity with recovery of 12.54% and purity fold 7.96 with the molecular weight of 44 kDa. The optimum temperature, pH and NaCl for enzyme activity was determined as 60°C, 9.0 and 30% and it retained 80% of activity even at 80°C, 12 and 35% respectively. The activity was greatly inhibited by EDTA, indicating that it was a metalloenzyme and significant inhibition by PMSF revealed that serine residue was essential for catalytic activity. The purified cellulase hydrolyzed CMC, cellobiose and xylan, but not avicel, cellulose and PNPG. Furthermore, the cellulase was highly stable in the presence of detergents and organic solvents such as acetone, n-hexane and acetonitrile. Thus, the purified cellulase from B. halodurans utilizing lignocellulosic biomass could be greatly useful to develop industrial processes.

Immobilization of cellulase on a reversibly soluble-insoluble support: properties and application

Cellulase was coupled to N-succinyl-chitosan (NSC) showing soluble-insoluble characteristics with pH change. Cellulase immobilized on NSC (NSCC) is in a soluble state during the enzyme reaction, yet can be recovered in its insoluble form by lowering the pH of the reaction solution after the reaction. NSCC was obtained under the optimized immobilization conditions of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) 10 mg, cellulase 15 mg, and pH 5.0. The retention activity of the immobilized cellulase was found to be 48.8%. The effects of pH and temperature on the activity and stability of NSCC were studied and compared with those of free cellulase. The optimum temperature and pH of NSCC was 45 degrees C and 4.0, respectively, which was found unchanged compared with the free one. The stability of cellulase against change in the pH and temperature was improved by the immobilization. The effectiveness of employing NSCC for extracting flavonoids from Ginkgo biloba leaf powder was investigated. Results showed that NSCC enhanced extraction yield up to 2.35-fold when compared with the conventional method. Moreover, NSCC retained 83.5% of its initial activity after five batches of hydrolysis reaction.

Dilute Acid Pretreatment, Enzymatic Saccharification, and Fermentation of Rice Hulls to Ethanol

Rice hulls, a complex lignocellulosic material with high lignin (15.38 +/- 0.2%) and ash (18.71 +/- 0.01%) content, contain 35.62 +/- 0.12% cellulose and 11.96 +/- 0.73% hemicellulose and has the potential to serve as a low-cost feedstock for production of ethanol. Dilute H2SO4 pretreatments at varied temperature (120-190 degrees C) and enzymatic saccharification (45 degrees C, pH 5.0) were evaluated for conversion of rice hull cellulose and hemicellulose to monomeric sugars. The maximum yield of monomeric sugars from rice hulls (15%, w/v) by dilute H2SO4 (1.0%, v/v) pretreatment and enzymatic saccharification (45 degrees C, pH 5.0, 72 h) using cellulase, beta-glucosidase, xylanase, esterase, and Tween 20 was 287 +/- 3 mg/g (60% yield based on total carbohydrate content). Under this condition, no furfural and hydroxymethyl furfural were produced. The yield of ethanol per L by the mixed sugar utilizing recombinant Escherichia colistrain FBR 5 from rice hull hydrolyzate containing 43.6 +/- 3.0 g fermentable sugars (glucose, 18.2 +/- 1.4 g; xylose, 21.4 +/- 1.1 g; arabinose, 2.4 +/- 0.3 g; galactose, 1.6 +/- 0.2 g) was 18.7 +/- 0.6 g (0.43 +/- 0.02 g/g sugars obtained; 0.13 +/- 0.01 g/g rice hulls) at pH 6.5 and 35 degrees C. Detoxification of the acid- and enzyme-treated rice hull hydrolyzate by overliming (pH 10.5, 90 degrees C, 30 min) reduced the time required for maximum ethanol production (17 +/- 0.2 g from 42.0 +/- 0.7 g sugars per L) by the E. coli strain from 64 to 39 h in the case of separate hydrolysis and fermentation and increased the maximum ethanol yield (per L) from 7.1 +/- 2.3 g in 140 h to 9.1 +/- 0.7 g in 112 h in the case of simultaneous saccharification and fermentation.

Bioconversion of lignocellulosic biomass: biochemical and molecular perspectives

In view of rising prices of crude oil due to increasing fuel demands, the need for alternative sources of bioenergy is expected to increase sharply in the coming years. Among potential alternative bioenergy resources, lignocellulosics have been identified as the prime source of biofuels and other value-added products. Lignocelluloses as agricultural, industrial and forest residuals account for the majority of the total biomass present in the world. To initiate the production of industrially important products from cellulosic biomass, bioconversion of the cellulosic components into fermentable sugars is necessary. A variety of microorganisms including bacteria and fungi may have the ability to degrade the cellulosic biomass to glucose monomers. Bacterial cellulases exist as discrete multi-enzyme complexes, called cellulosomes that consist of multiple subunits. Cellulolytic enzyme systems from the filamentous fungi, especially Trichoderma reesei, contain two exoglucanases or cellobiohydrolases (CBH1 and CBH2), at least four endoglucanases (EG1, EG2, EG3, EG5), and one beta-glucosidase. These enzymes act synergistically to catalyse the hydrolysis of cellulose. Different physical parameters such as pH, temperature, adsorption, chemical factors like nitrogen, phosphorus, presence of phenolic compounds and other inhibitors can critically influence the bioconversion of lignocellulose. The production of cellulases by microbial cells is governed by genetic and biochemical controls including induction, catabolite repression, or end product inhibition. Several efforts have been made to increase the production of cellulases through strain improvement by mutagenesis. Various physical and chemical methods have been used to develop bacterial and fungal strains producing higher amounts of cellulase, all with limited success. Cellulosic bioconversion is a complex process and requires the synergistic action of the three enzymatic components consisting of endoglucanases, exoglucanases and beta-glucosidases. The co-cultivation of microbes in fermentation can increase the quantity of the desirable components of the cellulase complex. An understanding of the molecular mechanism leading to biodegradation of lignocelluloses and the development of the bioprocessing potential of cellulolytic microorganisms might effectively be accomplished with recombinant DNA technology. For instance, cloning and sequencing of the various cellulolytic genes could economize the cellulase production process. Apart from that, metabolic engineering and genomics approaches have great potential for enhancing our understanding of the molecular mechanism of bioconversion of lignocelluloses to value added economically significant products in the future.

Purification and characterization of cellulase produced by Bacillus amyoliquefaciens DL-3 utilizing rice hull

A microorganism hydrolyzing rice hull was isolated from soil and identified as Bacillus amyloliquefaciens by analysis of 16S rDNA and partial sequences of the gyrA gene, and named as B. amyloliquefaciens DL-3. With the analysis of SDS-PAGE, the molecular weight of the purified cellulase was estimated to be 54kDa. The purified cellulase hydrolyzed avicel, caboxymethylcellulose (CMC), cellobiose, beta-glucan and xylan, but not p-Nitrophenyl-beta-D-glucopyranoside (PNPG). Optimum temperature and pH for the CMCase activity of the purified cellulase were found to be 50 degrees C and pH 7.0, respectively. The CMCase activity was inhibited by some metal ions, N-bromosuccinimide and EDTA in the order of Hg(2+)>EDTA>Mn(2+)>N-bromosuccinimide>Ni(2+)>Pb(2+)>Sr(2+)>Co(2+)>K(+). The open reading frame of the cellulase from B. amyloliquefaciens DL-3 was found to encode a protein of 499 amino acids. The deduced amino acid sequence of the cellulase from B. amyloliquefaciens DL-3 showed high identity to cellulases from other Bacillus species, a modular structure containing a catalytic domain of the glycoside hydrolase family 5 (GH5), and a cellulose-binding module type 3 (CBM3).

Research and application of microbial enzymes--India's contribution

Enzymes have attracted the attention of scientists world over due to their wide range of physiological, analytical and industrial applications. Although enzymes have been isolated, purified and studied from microbial, animal and plant sources, microorganisms represent the most common source of enzymes due to their broad biochemical diversity, feasibility of mass culture and ease of genetic manipulation. With the advent of molecular biology techniques, a number of genes of industrially important enzymes has been cloned and expressed in order to improve the production of enzymes, substrate utilization and other commercially useful properties. Special attention has been focused on enzymes isolated from thermophiles due to their inherent stability and industrial applications. In addition, a variety of methods have been employed to modify enzymes for their industrial usage including strain improvement, chemical modifications, modification of reaction environment, immobilization and protein engineering. A wide range of applications of enzymes in different bioprocess industries is discussed.