Sliding clamps: a (tail)ored fit

The potential of PCNA inhibition as a therapeutic strategy in cervical cancer

Cervical cancers are the fourth most common and most deadly cancer in women worldwide. Despite being a tremendous public health burden, few novel approaches to improve care for these malignancies have been introduced. We discuss the potential for proliferating cell nuclear antigen (PCNA) inhibition to address this need as well as the advantages and disadvantages for compounds that can therapeutically inhibit PCNA with a specific focus on cervical cancer.

A lesson for the maestro of the replication fork: Targeting the protein-binding interface of proliferating cell nuclear antigen for anticancer therapy

The proliferating cell nuclear antigen (PCNA) has emerged as a promising candidate for the development of novel cancer therapeutics. PCNA is a nononcogenic mediator of DNA replication that regulates a diverse range of cellular functions and pathways through a comprehensive list of protein-protein interactions. The hydrophobic binding pocket on PCNA offers an opportunity for the development of inhibitors to target various types of cancers and modulate protein-protein interactions. In the present study, we explored the binding modes and affinity of molecule I1 (standard molecule) with the previously suggested dimer interface pocket and the hydrophobic pocket present on the frontal side of the PCNA monomer. We also identified potential lead molecules from the library of in-house synthesized 3-methylenisoindolin-1-one based molecules to inhibit the protein-protein interactions of PCNA. Our results were based on robust computational methods, including molecular docking, conventional, steered, and umbrella sampling molecular dynamics simulations. Our results suggested that the standard inhibitor I1 interacts with the hydrophobic pocket of PCNA with a higher affinity than the previously suggested binding site. Also, the proposed molecules showed better or comparable binding free energies as calculated by the Molecular Mechanics Poisson-Boltzmann Surface Area (MMPBSA) approach and further validated by enhanced umbrella sampling simulations. In vitro and in vivo methods could test the computationally suggested molecules for advancement in the drug discovery pipeline.

Searching for Low Probability Opening Events in a DNA Sliding Clamp

The β subunit of E. coli DNA polymererase III is a DNA sliding clamp associated with increasing the processivity of DNA synthesis. In its free form, it is a circular homodimer structure that can accomodate double-stranded DNA in a nonspecific manner. An open state of the clamp must be accessible before loading the DNA. The opening mechanism is still a matter of debate, as is the effect of bound DNA on opening/closing kinetics. We use a combination of atomistic, coarse-grained, and enhanced sampling strategies in both explicit and implicit solvents to identify opening events in the sliding clamp. Such simulations of large nucleic acid and their complexes are becoming available and are being driven by improvements in force fields and the creation of faster computers. Different models support alternative opening mechanisms, either through an in-plane or out-of-plane opening event. We further note some of the current limitations, despite advances, in modeling these highly charged systems with implicit solvent.

PCNA in Cervical Intraepithelial Neoplasia and Cervical Cancer: An Interaction Network Analysis of Differentially Expressed Genes

The investigation of differentially expressed genes (DEGs) and their interactome could provide valuable insights for the development of markers to optimize cervical intraepithelial neoplasia (CIN) screening and treatment. This study investigated patients with cervical disease to identify gene markers whose dysregulated expression and protein interaction interface were linked with CIN and cervical cancer (CC). Literature search of microarray datasets containing cervical epithelial samples was conducted in Gene Expression Omnibus and Pubmed/Medline from inception until March 2021. Retrieved DEGs were used to construct two protein-protein interaction (PPI) networks. Module DEGs that overlapped between CIN and CC samples, were ranked based on 11 topological algorithms. The highest-ranked hub gene was retrieved and its correlation with prognosis, tissue expression and tumor purity in patients with CC, was evaluated. Screening of the literature yielded 9 microarray datasets (GSE7803, GSE27678, GSE63514, GSE6791, GSE9750, GSE29570, GSE39001, GSE63678, GSE67522). Two PPI networks from CIN and CC samples were constructed and consisted of 1704 and 3748 DEGs along 21393 and 79828 interactions, respectively. Two gene clusters were retrieved in the CIN network and three in the CC network. Multi-algorithmic topological analysis revealed PCNA as the highest ranked hub gene between the two networks, both in terms of expression and interactions. Further analysis revealed that while PCNA was overexpressed in CC tissues, it was correlated with favorable prognosis (log-rank P=0.022, HR=0.58) and tumor purity (P=9.86 × 10^-4, partial rho=0.197) in CC patients. This study identified that cervical PCNA exhibited multi-algorithmic topological significance among DEGs from CIN and CC samples. Overall, PCNA may serve as a potential gene marker of CIN progression. Experimental validation is necessary to examine its value in patients with cervical disease.

Yeast DNA polymerase η possesses two PIP-like motifs that bind PCNA and Rad6-Rad18 with different specificities

In translesion synthesis (TLS), specialized DNA polymerases, such as polymerase (pol) η and Rev1, are recruited to stalled replication forks. These polymerases form a multi-protein complex with PCNA, Rad6-Rad18, and other specialized polymerases. Pol η interacts with PCNA and Rev1 via a PCNA-interacting protein (PIP) motif in its C-terminal unstructured region. Here we report the discovery of a second PIP-like motif in the C-terminal region of pol η, which we have designated as PIP2. We have designated the original PIP motif as PIP1. We show that the pol η PIP1 and PIP2 motifs bind PCNA with different affinities and kinetics. PIP1 binds with higher affinity than does PIP2, and PIP1 dissociates more slowly than does PIP2. In addition, we show that the interaction between pol η and Rad6-Rad18 is also mediated by the pol η PIP1 and PIP2 motifs. Again, we show that the affinity and kinetics by which these motifs bind Rad6-Rad18 is different. These findings are significant, because the multiple PIP-like motifs on pol η likely play quite different roles within the multi-protein complex formed at stalled replication forks. PIP1 likely plays a critical role in the recruiting pol η to this multi-protein complex. PIP2, by contrast, likely plays a critical role in maintaining the architecture and the dynamics of this multi-protein complex needed to maximize the efficiency and accuracy of TLS.

Eukaryotic translesion synthesis: Choosing the right tool for the job

Normal DNA replication is blocked by DNA damage in the template strand. Translesion synthesis is a major pathway for overcoming these replication blocks. In this process, multiple non-classical DNA polymerases are thought to form a complex at the stalled replication fork that we refer to as the mutasome. This hypothetical multi-protein complex is structurally organized by the replication accessory factor PCNA and the non-classical polymerase Rev1. One of the non-classical polymerases within this complex then catalyzes replication through the damage. Each non-classical polymerase has one or more cognate lesions, which the enzyme bypasses with high accuracy and efficiency. Thus, the accuracy and efficiency of translesion synthesis depends on which non-classical polymerase is chosen to bypass the damage. In this review article, we discuss how the most appropriate polymerase is chosen. In so doing, we examine the structural motifs that mediate the protein interactions in the mutasome; the multiple architectures that the mutasome can adopt, such as PCNA tool belts and Rev1 bridges; the intrinsically disordered regions that tether the polymerases to PCNA and to one another; and the kinetic selection model in which the most appropriate polymerase is chosen via a competition among the multiple polymerases within the mutasome.

The translesion DNA polymerases Pol ζ and Rev1 are activated independently of PCNA ubiquitination upon UV radiation in mutants of DNA polymerase δ

Replicative DNA polymerases cannot insert efficiently nucleotides at sites of base lesions. This function is taken over by specialized translesion DNA synthesis (TLS) polymerases to allow DNA replication completion in the presence of DNA damage. In eukaryotes, Rad6- and Rad18-mediated PCNA ubiquitination at lysine 164 promotes recruitment of TLS polymerases, allowing cells to efficiently cope with DNA damage. However, several studies showed that TLS polymerases can be recruited also in the absence of PCNA ubiquitination. We hypothesized that the stability of the interactions between DNA polymerase δ (Pol δ) subunits and/or between Pol δ and PCNA at the primer/template junction is a crucial factor to determine the requirement of PCNA ubiquitination. To test this hypothesis, we used a structural mutant of Pol δ in which the interaction between Pol3 and Pol31 is inhibited. We found that in yeast, rad18Δ-associated UV hypersensitivity is suppressed by pol3-ct, a mutant allele of the POL3 gene that encodes the catalytic subunit of replicative Pol δ. pol3-ct suppressor effect was specifically dependent on the Rev1 and Pol ζ TLS polymerases. This result strongly suggests that TLS polymerases could rely much less on PCNA ubiquitination when Pol δ interaction with PCNA is partially compromised by mutations. In agreement with this model, we found that the pol3-FI allele suppressed rad18Δ-associated UV sensitivity as observed for pol3-ct. This POL3 allele carries mutations within a putative PCNA Interacting Peptide (PIP) motif. We then provided molecular and genetic evidence that this motif could contribute to Pol δ-PCNA interaction indirectly, although it is not a bona fide PIP. Overall, our results suggest that the primary role of PCNA ubiquitination is to allow TLS polymerases to outcompete Pol δ for PCNA access upon DNA damage.

Replicative DNA polymerases have the essential role of replicating genomic DNA during the S phase of each cell cycle. DNA replication occurs smoothly and accurately if the DNA to be replicated is undamaged. Conversely, replicative DNA polymerases stall abruptly when they encounter a damaged base on their template. In this case, alternative specialized DNA polymerases are recruited to insert nucleotides at sites of base lesions. However, these translesion polymerases are not processive and they are poorly accurate. Therefore, they need to be tightly regulated. This is achieved by the covalent binding of the small ubiquitin peptide to the polymerase cofactor PCNA that subsequently triggers the recruitment of translesion polymerases at sites of DNA damage. Yet, recruitment of translesion polymerases independently of PCNA ubiquitination also has been documented, although the underlying mechanism is not known. Moreover, this observation makes more difficult to understand the exact role of PCNA ubiquitination. Here, we present strong genetic evidence in Saccharomyces cerevisiae implying that the replicative DNA polymerase δ (Pol δ) prevents the recruitment of the translesion polymerases Pol ζ and Rev1 following UV irradiation unless PCNA is ubiquitinated. Thus, the primary role of PCNA ubiquitination would be to allow translesion polymerases to outcompete Pol δ upon DNA damage. In addition, our results led us to propose that translesion polymerases could be recruited independently of PCNA ubiquitination when Pol δ association with PCNA is challenged, for instance at difficult-to-replicate loci.

R.I.P. to the PIP: PCNA-binding motif no longer considered specific: PIP motifs and other related sequences are not distinct entities and can bind multiple proteins involved in genome maintenance

Many proteins responsible for genome maintenance interact with one another via short sequence motifs. The best known of these are PIP motifs, which mediate interactions with the replication protein PCNA. Others include RIR motifs, which bind the translesion synthesis protein Rev1, and MIP motifs, which bind the mismatch repair protein Mlh1. Although these motifs have similar consensus sequences, they have traditionally been viewed as separate motifs, each with their own target protein. In this article, we review several recent studies that challenge this view. Taken together, they imply that these different motifs are not distinct entities. Instead, there is a single, broader class of motifs, which we call "PIP-like" motifs, which have overlapping specificities and are capable of binding multiple target proteins. Given this, we must reassess the role of these motifs in forming the network of interacting proteins responsible for genome maintenance.

Differential modes of peptide binding onto replicative sliding clamps from various bacterial origins

Bacterial sliding clamps are molecular hubs that interact with many proteins involved in DNA metabolism through their binding, via a conserved peptidic sequence, into a universally conserved pocket. This interacting pocket is acknowledged as a potential molecular target for the development of new antibiotics. We previously designed short peptides with an improved affinity for the Escherichia coli binding pocket. Here we show that these peptides differentially interact with other bacterial clamps, despite the fact that all pockets are structurally similar. Thermodynamic and modeling analyses of the interactions differentiate between two categories of clamps: group I clamps interact efficiently with our designed peptides and assemble the Escherichia coli and related orthologs clamps, whereas group II clamps poorly interact with the same peptides and include Bacillus subtilis and other Gram-positive clamps. These studies also suggest that the peptide binding process could occur via different mechanisms, which depend on the type of clamp.

A solution to release twisted DNA during chromosome replication by coupled DNA polymerases

Chromosomal replication machines contain coupled DNA polymerases that simultaneously replicate the leading and lagging strands¹. However, coupled replication presents a largely unrecognized topological problem. Since DNA polymerase must travel a helical path during synthesis, the physical connection between leading and lagging strand polymerases causes the daughter strands to entwine, or produces extensive buildup of negative supercoils in the newly synthesized DNA^2–4. How DNA polymerases maintain their connection during coupled replication despite these topological challenges is a mystery. Here, we examine the dynamics of the E. coli replisome, by ensemble and single-molecule methods that may solve this topological problem independent of topoisomerases. We find that the lagging strand polymerase frequently releases from an Okazaki fragment before completion, leaving single-strand gaps behind. Dissociation of the polymerase does not result in loss from the replisome due to its contact with the leading-strand polymerase. This behavior, referred to as “signal release”, had been thought to require a protein, possibly primase, to pry polymerase from incompletely extended DNA fragments^5–7. However, we observe that signal release is independent of primase and does not appear to require a protein trigger at all. Instead, the lagging-strand polymerase is simply less processive in the context of a replisome. Interestingly, when the lagging-strand polymerase is supplied with primed DNA in trans, uncoupling it from the fork, high processivity is restored. Hence, we propose that coupled polymerases introduce topological changes, possibly by accumulation of superhelical tension in the newly synthesized DNA, that cause lower processivity and transient lagging-strand polymerase dissociation from DNA.

Impact of individual proliferating cell nuclear antigen-DNA contacts on clamp loading and function on DNA

Ring-shaped clamp proteins encircle DNA and affect the work of many proteins, notably processive replication by DNA polymerases. Crystal structures of clamps show several cationic residues inside the ring, and in a co-crystal of Escherichia coli β clamp-DNA, they directly contact the tilted duplex passing through (Georgescu, R. E., Kim, S. S., Yurieva, O., Kuriyan, J., Kong, X. P., and O'Donnell, M. (2008) Structure of a sliding clamp on DNA. Cell 132, 43-54). To investigate the role of these contacts in reactions involving circular clamps, we examined single arginine/lysine mutants of Saccharomyces cerevisiae proliferating cell nuclear antigen (PCNA) in replication factor C (RFC)-catalyzed loading of the clamp onto primer template DNA (ptDNA). Previous kinetic analysis has shown that ptDNA entry inside an ATP-activated RFC-PCNA complex accelerates clamp opening and ATP hydrolysis, which is followed by slow PCNA closure around DNA and product dissociation. Here we directly measured multiple steps in the reaction (PCNA opening, ptDNA binding, PCNA closure, phosphate release, and complex dissociation) to determine whether mutation of PCNA residues Arg-14, Lys-20, Arg-80, Lys-146, Arg-149, or Lys-217 to alanine affects the reaction mechanism. Contrary to earlier steady state analysis of these mutants (McNally, R., Bowman, G. D., Goedken, E. R., O'Donnell, M., and Kuriyan, J. (2010) Analysis of the role of PCNA-DNA contacts during clamp loading. BMC Struct. Biol. 10, 3), our pre-steady state data show that loss of single cationic residues can alter the rates of all DNA-linked steps in the reaction, as well as movement of PCNA on DNA. These results explain an earlier finding that individual arginines and lysines inside human PCNA are essential for polymerase δ processivity (Fukuda, K., Morioka, H., Imajou, S., Ikeda, S., Ohtsuka, E., and Tsurimoto, T. (1995) Structure-function relationship of the eukaryotic DNA replication factor, proliferating cell nuclear antigen. J. Biol. Chem. 270, 22527-22534). Mutations in the N-terminal domain have greater impact than in the C-terminal domain, indicating a positional bias in PCNA-DNA contacts that can influence its functions on DNA.

Evaluation of antitumour activity of tea carbohydrate polymers in hepatocellular carcinoma animals

Box-Behnken design criterion was applied to identify the significant effects of various extraction parameters such as temperature, time, and solvent-solid ratio on extraction of tea carbohydrate. Among the three variables tested extraction temperature, and solvent-solid ratio were found to have significant effect on tea carbohydrate extraction. The most suitable condition for extraction of tea carbohydrate was found to be a single step extraction at extraction temperature 90°C, extraction time 30 min, and solvent-solid ratio 5:1. At these optimum extraction parameters, the maximum yield of tea carbohydrate obtained experimentally was found to be very close to its predicted value of 3.47% dry weight of root. Then, we have studied the influence of tea carbohydrate on biochemical parameters in hepatocellular carcinoma (HCC) animals. Hepatocellular carcinoma was induced by the injection of 1×10(5) H22 hepatocarcinoma cells into right hind thigh muscle in experimental animals. Tea carbohydrate could inhibit tumour growth and decrease microvessel density in tumour tissue. The altered amount of serum white blood cells (WBC), Interferon-gamma (IFN-γ) and tumor necrosis factor-alpha (TNF-α) in HCC animals were dose-dependently increased, whereas activities of serum alanine transaminase (ALT), aspartate transaminase (AST) and alkaline phosphatase (ALP) were dose-dependently decreased in the drug treated animals. In addition, tea carbohydrate administration could decrease expression of vascular endothelial growth factor (VEGF) and proliferating cell nuclear antigen (PCNA) in H22 tumor tissue. It can be concluded that tea carbohydrate displayed strong antitumour activity in animals.

PCNA structure and function: insights from structures of PCNA complexes and post-translationally modified PCNA

Proliferating cell nuclear antigen (PCNA), the eukaryotic DNA sliding clamp, forms a ring-shaped homo-trimer that encircles double-stranded DNA. This protein is best known for its ability to confer high processivity to replicative DNA polymerases. However, it does far more than this, because it forms a mobile platform on the DNA that recruits many of the proteins involved in DNA replication, repair, and recombination to replication forks. X-ray crystal structures of PCNA bound to PCNA-binding proteins have provided insights into how PCNA recognizes its binding partners and recruits them to replication forks. More recently, X-ray crystal structures of ubiquitin-modified and SUMO-modified PCNA have provided insights into how these post-translational modifications alter the specificity of PCNA for some of its binding partners. This article focuses on the insights gained from structural studies of PCNA complexes and post-translationally modified PCNA.

Crystal structure of SUMO-modified proliferating cell nuclear antigen

Eukaryotic proliferating cell nuclear antigen (PCNA) is a replication accessory protein that functions in DNA replication, repair, and recombination. The various functions of PCNA are regulated by posttranslational modifications including mono-ubiquitylation, which promotes translesion synthesis, and sumoylation, which inhibits recombination. To understand how SUMO modification regulates PCNA, we generated a split SUMO-modified PCNA protein and showed that it supports cell viability and stimulates DNA polymerase δ activity. We then determined its X-ray crystal structure and found that SUMO occupies a position on the back face of the PCNA ring, which is distinct from the position occupied by ubiquitin in the structure of ubiquitin-modified PCNA. We propose that the back of PCNA has evolved to be a site of regulation that can be easily modified without disrupting ongoing reactions on the front of PCNA, such as normal DNA replication. Moreover, these modifications likely allow PCNA to function as a tool belt, whereby proteins can be recruited to the replication machinery via the back of PCNA and be held in reserve until needed.

Single-molecule studies of the replisome

Replication of DNA is carried out by the replisome, a multiprotein complex responsible for the unwinding of parental DNA and the synthesis of DNA on each of the two DNA strands. The impressive speed and processivity with which the replisome duplicates DNA are a result of a set of tightly regulated interactions between the replication proteins. The transient nature of these protein interactions makes it challenging to study the dynamics of the replisome by ensemble-averaging techniques. This review describes single-molecule methods that allow the study of individual replication proteins and their functioning within the replisome. The ability to mechanically manipulate individual DNA molecules and record the dynamic behavior of the replisome while it duplicates DNA has led to an improved understanding of the molecular mechanisms underlying DNA replication.

DNA replication times the cell cycle and contributes to the mid-blastula transition in Drosophila embryos

Deletion of S phase disrupts mitotic timing in maternally regulated cycles, but it doesn't alter the cell cycle once zygotic transcription has begun.

We examined the contribution of S phase in timing cell cycle progression during Drosophila embryogenesis using an approach that deletes S phase rather than arresting its progress. Injection of Drosophila Geminin, an inhibitor of replication licensing, prevented subsequent replication so that the following mitosis occurred with uninemic chromosomes, which failed to align. The effect of S phase deletion on interphase length changed with development. During the maternally regulated syncytial blastoderm cycles, deleting S phase shortened interphase, and deletion of the last of blastoderm S phase (cycle 14) induced an extra synchronous division and temporarily deferred mid-blastula transition (MBT) events. In contrast, deleting S phase after the MBT in cycle 15 did not dramatically affect mitotic timing, which appears to retain its dependence on developmentally programmed zygotic transcription. We conclude that normal S phase and replication checkpoint activities are important timers of the undisturbed cell cycle before, but not after, the MBT.

Mutations that increase DNA binding by the processivity factor of herpes simplex virus affect virus production and DNA replication fidelity

The interactions of the herpes simplex virus processivity factor UL42 with the catalytic subunit of the viral polymerase (Pol) and DNA are critical for viral DNA replication. Previous studies, including one showing that substitution of glutamine residue 282 with arginine (Q282R) results in an increase of DNA binding in vitro, have indicated that the positively charged back surface of UL42 interacts with DNA. To investigate the biological consequences of increased DNA binding by UL42 mutations, we constructed two additional UL42 mutants, including one with a double substitution of alanine for aspartic acid residues (D270A/D271A) and a triple mutant with the D270A/D271A and Q282R substitutions. These UL42 mutants exhibited increased and prolonged DNA binding without an effect on binding to a peptide corresponding to the C terminus of Pol. Plasmids expressing any of the three UL42 mutants with an increased positive charge on the back surface of UL42 were qualitatively competent for complementation of growth and DNA replication of a UL42 null mutant on Vero cells. We then engineered viruses expressing these mutant proteins. The UL42 mutants were more resistant to detergent extraction than wild-type UL42, suggesting that they are more tightly associated with DNA in infected cells. All three UL42 mutants formed smaller plaques on Vero cells and replicated to reduced yields compared with results for a control virus expressing wild-type UL42. Moreover, mutants with double and triple mutations, which contain D270A/D271A mutations, exhibited increased mutation frequencies, and mutants containing the Q282R mutation exhibited elevated ratios of virion DNA copies per PFU. These results suggest that herpes simplex virus has evolved so that UL42 neither binds DNA too tightly nor too weakly to optimize virus production and replication fidelity.

Construction of bacteriophage phi29 DNA packaging motor and its applications in nanotechnology and therapy

Nanobiotechnology involves the creation, characterization, and modification of organized nanomaterials to serve as building blocks for constructing nanoscale devices in technology and medicine. Living systems contain a wide variety of nanomachines and highly ordered structures of macromolecules. The novelty and ingenious design of the bacterial virus phi29 DNA packaging motor and its parts inspired the synthesis of this motor and its components as biomimetics. This 30-nm nanomotor uses six copies of an ATP-binding pRNA to gear the motor. The structural versatility of pRNA has been utilized to construct dimers, trimers, hexamers, and patterned superstructures via the interaction of two interlocking loops. The approach, based on bottom-up assembly, has also been applied to nanomachine fabrication, pathogen detection and the delivery of drugs, siRNA, ribozymes, and genes to specific cells in vitro and in vivo. Another essential component of the motor is the connector, which contains 12 copies of a protein gp10 to form a 3.6-nm central channel as a path for DNA. This article will review current studies of the structure and function of the phi29 DNA packaging motor, as well as the mechanism of motion, the principle of in vitro construction, and its potential nanotechnological and medical applications.

A charged residue at the subunit interface of PCNA promotes trimer formation by destabilizing alternate subunit interactions

Eukaryotic proliferating cell nuclear antigen (PCNA) is an essential replication accessory factor that interacts with a variety of proteins involved in DNA replication and repair. Each monomer of PCNA has an N-terminal domain A and a C-terminal domain B. In the structure of the wild-type PCNA protein, domain A of one monomer interacts with domain B of a neighboring monomer to form a ring-shaped trimer. Glu113 is a conserved residue at the subunit interface in domain A. Two distinct X-ray crystal structures have been determined of a mutant form of PCNA with a substitution at this position (E113G) that has previously been studied because of its effect on translesion synthesis. The first structure was the expected ring-shaped trimer. The second structure was an unanticipated nontrimeric form of the protein. In this nontrimeric form, domain A of one PCNA monomer interacts with domain A of a neighboring monomer, while domain B of this monomer interacts with domain B of a different neighboring monomer. The B-B interface is stabilized by an antiparallel beta-sheet and appears to be structurally similar to the A-B interface observed in the trimeric form of PCNA. The A-A interface, in contrast, is primarily stabilized by hydrophobic interactions. Because the E113G substitution is located on this hydrophobic surface, the A-A interface should be less favorable in the case of the wild-type protein. This suggests that the side chain of Glu113 promotes trimer formation by destabilizing these possible alternate subunit interactions.

Mechanism of ATP-driven PCNA clamp loading by S. cerevisiae RFC

Circular clamps tether polymerases to DNA, serving as essential processivity factors in genome replication, and function in other critical cellular processes as well. Clamp loaders catalyze clamp assembly onto DNA, and the question of how these proteins construct a topological link between a clamp and DNA, especially the mechanism by which ATP is utilized for the task, remains open. Here we describe pre-steady-state analysis of ATP hydrolysis, proliferating cell nuclear antigen (PCNA) clamp opening, and DNA binding by Saccharomyces cerevisiae replication factor C (RFC), and present the first kinetic model of a eukaryotic clamp-loading reaction validated by global data analysis. ATP binding to multiple RFC subunits initiates a slow conformational change in the clamp loader, enabling it to bind and open PCNA and to bind DNA as well. PCNA opening locks RFC into an active state, and the resulting RFC.ATP.PCNA((open)) intermediate is ready for the entry of DNA into the clamp. DNA binding commits RFC to ATP hydrolysis, which is followed by PCNA closure and PCNA.DNA release. This model enables quantitative understanding of the multistep mechanism of a eukaryotic clamp loader and furthermore facilitates comparative analysis of loaders from diverse organisms.

Structure of a mutant form of proliferating cell nuclear antigen that blocks translesion DNA synthesis

Proliferating cell nuclear antigen (PCNA) is a homotrimeric protein that functions as a sliding clamp during DNA replication. Several mutant forms of PCNA that block translesion DNA synthesis have been identified in genetic studies in yeast. One such mutant protein (encoded by the rev6-1 allele) is a glycine to serine substitution at residue 178, located at the subunit interface of PCNA. To improve our understanding of how this substitution interferes with translesion synthesis, we have determined the X-ray crystal structure of the PCNA G178S mutant protein. This substitution has little effect on the structure of the domain in which the substitution occurs. Instead, significant, local structural changes are observed in the adjacent subunit. The most notable difference between mutant and wild-type structures is in a single, extended loop (comprising amino acid residues 105-110), which we call loop J. In the mutant protein structure, loop J adopts a very different conformation in which the atoms of the protein backbone have moved by as much as 6.5 A from their positions in the wild-type structure. To improve our understanding of the functional consequences of this structural change, we have examined the ability of this mutant protein to stimulate nucleotide incorporation by DNA polymerase eta (pol eta). Steady state kinetic studies show that while wild-type PCNA stimulates incorporation by pol eta opposite an abasic site, the mutant PCNA protein actually inhibits incorporation opposite this DNA lesion. These results show that the position of loop J in PCNA plays an essential role in facilitating translesion synthesis.

Structures of monomeric, dimeric and trimeric PCNA: PCNA-ring assembly and opening

DNA sliding clamps form an oligomeric ring encircling DNA and serve as a moving platform for DNA-processing proteins. The opening and closing of a sliding-clamp ring is essential to load the clamp onto DNA in order to perform its functions. The molecular details of how clamp rings open and enclose DNA are still not clear. Three PCNA homologues have been found in Sulfolobus solfataricus which form a heterotrimer. Taking advantage of their hetero-oligomeric nature, the structures of the PCNAs in monomeric PCNA3, dimeric PCNA1-PCNA2 and trimeric PCNA1-PCNA2-PCNA3 forms were determined at resolutions of 2.6-1.9 A. The distinct oligomeric structures represent different stages in ring formation, which were verified in solution by ultracentrifugation analysis. The heterodimer opens in a V-shape of 130 degrees , while the heterotrimers form a ring with a 120 degrees rotation between monomers. The association of a rigid PCNA3 monomer with an opened PCNA1-PCNA2 heterodimer closes the ring and introduces a spring tension in the PCNA1-PCNA2 interface, thus bending the nine-stranded intermolecular beta-sheet to fit the 120 degrees rotation. The release of the spring tension as PCNA3 dissociates from the ring may facilitate ring opening. The structural features in different assemblies present a molecular model for clamp ring assembly and opening.

Multiple ATP binding is required to stabilize the "activated" (clamp open) clamp loader of the T4 DNA replication complex

Most DNA replication systems include a sliding clamp that encircles the genomic DNA and links the polymerase to the template to control polymerase processivity. A loading complex is required to open the clamp and place it onto the DNA. In phage T4 this complex consists of a trimeric clamp of gp45 subunits and a pentameric loader assembly of four gp44 and one gp62 subunit(s), with clamp loading driven by ATP binding. We measure this binding as a function of input ligand concentration and show that four ATPs bind to the gp44/62 complex with equal affinity. In contrast, the ATPase rate profile of the clamp-clamp loader complex exhibits a marked peak at an input ATP concentration close to the overall Kd (approximately 30 microm), with further increases in bound ATP decreasing the ATPase rate to a much lower level. Thus the progressive binding of the four ATPs triggers a conformational change in the complex that markedly inhibits ATPase activity. This inhibition is related to ring opening by using a clamp that is covalently cross-linked across its subunit interfaces and thus rendered incapable of opening. Binding of this clamp abolishes substrate inhibition of the ATPase but leaves ATP binding unchanged. We show that four ATP ligands must bind to the T4 clamp loader before the loader can be fully "activated" and the clamp opened, and that ATP hydrolysis is required only for release of the loader complex after clamp loading onto the replication fork has been completed.

uvsF RFC1, the large subunit of replication factor C in Aspergillus nidulans, is essential for DNA replication, functions in UV repair and is upregulated in response to MMS-induced DNA damage

uvsF201 was the first highly UV-sensitive repair-defective mutation isolated in Aspergillus nidulans. It showed epistasis only with postreplication repair mutations, but caused lethal interactions with many other repair-defective strains. Unexpectedly, closest homology of uvsF was found to the large subunit of human DNA replication factor RFC that is essential for DNA replication. Sequencing of the uvsF201 region identified changes at two close base pairs and the corresponding amino acids in the 5'-region of uvsF(RFC1). This viable mutant represents a novel and possibly important type. Additional sequencing of the uvsF region confirmed a mitochondrial ribosomal protein gene, mrpA(L16), closely adjacent, head-to-head with a 0.2kb joint promoter region. MMS-induced transcription of both the genes, but especially uvsF(RFC1), providing evidence for a function in DNA damage response.

Herpes simplex virus mutants with multiple substitutions affecting DNA binding of UL42 are impaired for viral replication and DNA synthesis

Herpes simplex virus mutants with single substitutions that decrease DNA binding by the DNA polymerase processivity subunit UL42 are only modestly impaired for viral replication. In this study, recombinant viruses harboring two or four of these mutations were constructed. The more substitutions, the more severe the defects in viral replication and DNA synthesis, suggesting that DNA binding by UL42 is important for these processes.

Fluorescence of 2-aminopurine reveals rapid conformational changes in the RB69 DNA polymerase-primer/template complexes upon binding and incorporation of matched deoxynucleoside triphosphates

We have used 2-aminopurine (2AP) as a fluorescent probe in the template strand of a 13/20mer primer/template (D) to detect deoxynucleoside triphosphates (N)-dependent conformational changes exhibited by RB69 DNA polymerase (ED) complexes. The rates and amplitudes of fluorescence quenching depend hyperbolically on the [dTTP] when a dideoxy-primer/template (ddP/T) with 2AP as the templating base (n position) is used. No detectable fluorescence changes occur when a ddP/T with 2AP positioned 5' to the templating base (n + 1 position) is used. With a deoxy-primer/template (dP/T) with 2AP in the n position, a rapid fluorescence quenching occurs within 2 ms, followed by a second, slower fluorescence quenching with a rate constant similar to base incorporation as determined by chemical quench. With a dP/T having 2AP in the n + 1 position, there is a [dNTP]-dependent fluorescence enhancement that occurs at a rate comparable to dNMP incorporation. Collectively, the results favor a minimal kinetic scheme in which population of two distinct biochemical states of the ternary EDN complex precedes the nucleotidyl transfer reaction. Observed differences between dP/T and ddP/T ternary complexes indicate that the 3' hydroxyl group of the primer plays a critical role in determining the rate constants of transitions that lead to strong deoxynucleoside triphosphate binding prior to chemistry.

Mutations that decrease DNA binding of the processivity factor of the herpes simplex virus DNA polymerase reduce viral yield, alter the kinetics of viral DNA replication, and decrease the fidelity of DNA replication

The processivity subunit of the herpes simplex virus DNA polymerase, UL42, is essential for viral replication and possesses both Pol- and DNA-binding activities. Previous studies demonstrated that the substitution of alanine for each of four arginine residues, which reside on the positively charged surface of UL42, resulted in decreased DNA binding affinity and a decreased ability to synthesize long-chain DNA by the polymerase. In this study, the effects of each substitution on the production of viral progeny, viral DNA replication, and DNA replication fidelity were examined. Each substitution mutant was able to complement the replication of a UL42 null mutant in transient complementation assays and to support the replication of plasmid DNA containing herpes simplex virus type 1 (HSV-1) origin sequences in transient DNA replication assays. Mutant viruses containing each substitution and a lacZ insertion in a nonessential region of the genome were constructed and characterized. In single-cycle growth assays, the mutants produced significantly less progeny virus than the control virus containing wild-type UL42. Real-time PCR assays revealed that these UL42 mutants synthesized less viral DNA during the early phase of infection. Interestingly, during the late phase of infection, the mutant viruses synthesized larger amounts of viral DNA than the control virus. The frequencies of mutations of the virus-borne lacZ gene increased significantly in the substitution mutants compared to those observed for the control virus. These results demonstrate that the reduced DNA binding of UL42 is associated with significant effects on virus yields, viral DNA replication, and replication fidelity. Thus, a processivity factor can influence replication fidelity in mammalian cells.

Accessory proteins assist exonuclease-deficient bacteriophage T4 DNA polymerase in replicating past an abasic site

Replicative DNA polymerases, such as T4 polymerase, possess both elongation and 3'-5' exonuclease proofreading catalytic activities. They arrest at the base preceding DNA damage on the coding DNA strand and specialized DNA polymerases have evolved to replicate across the lesion by a process known as TLS (translesion DNA synthesis). TLS is considered to take place in two steps that often require different enzymes, insertion of a nucleotide opposite the damaged template base followed by extension from the inserted nucleotide. We and others have observed that inactivation of the 3'-5' exonuclease function of T4 polymerase enables TLS across a single site-specific abasic [AP (apurinic/apyrimidinic)] lesion. In the present study we report a role for auxiliary replicative factors in this reaction. When replication is performed with a large excess of DNA template over DNA polymerase in the absence of auxiliary factors, the exo- polymerase (T4 DNA polymerase deficient in the 3'-5' exonuclease activity) inserts one nucleotide opposite the AP site but does not extend past the lesion. Addition of the clamp processivity factor and the clamp loader complex restores primer extension across an AP lesion on a circular AP-containing DNA substrate by the exo- polymerase, but has no effect on the wild-type enzyme. Hence T4 DNA polymerase exhibits a variety of responses to DNA damage. It can behave as a replicative polymerase or (in the absence of proofreading activity) as a specialized DNA polymerase and carry out TLS. As a specialized polymerase it can function either as an inserter or (with the help of accessory proteins) as an extender. The capacity to separate these distinct functions in a single DNA polymerase provides insight into the biochemical requirements for translesion DNA synthesis.

Up-regulation of proliferating cell nuclear antigen (PCNA) is closely associated with high-risk human papillomavirus (HPV) and progression of cervical intraepithelial neoplasia (CIN), but does not predict disease outcome in cervical cancer

OBJECTIVE

Proliferating cell nuclear antigen (PCNA) is essential for DNA replication of mammalian cells and their small DNA tumour viruses. The E7 oncoprotein of high-risk human papillomavirus (HPV) is known to activate PCNA, shown to be up-regulated in CIN and cervical cancer (CC), but still incompletely studied as an intermediate endpoint marker in this disease.

MATERIAL AND METHODS

As part of our HPV-PathogenISS study, a series of 150 CCs and 152 CIN lesions were examined using immunohistochemical (IHC) staining for PCNA, and tested for HPV using PCR with three primer sets (MY09/11, GP5+/GP6+, SPF). Follow-up data were available from all SCC patients, and 67 of the CIN lesions had been monitored with serial PCR for HPV after cone treatment.

RESULTS

Expression of PCNA increased in parallel with the grade of CIN, with major up-regulation upon transition to CIN3 (OR 21.77; 95%CI 6.59-71.94) (p = 0.0001). Intense PCNA expression was 100% specific indicator of CIN, with 100% PPV, but suffers from low sensitivity (34.8%) and NPV (10.8%). PCNA expression was also significantly associated to HR-HPV with OR 3.02 (95%CI 1.71-5.34) (p = 0.0001), and this association was not confounded by the histological grade (Mantel-Haenszel common OR = 2.03; 95%CI 1.06-3.89) (p = 0.033). Expression of PCNA did not predict clearance/persistence of HR-HPV after treatment of CIN, and it was not a prognostic predictor in CC in univariate or in multivariate analysis.

CONCLUSIONS

Up-regulation of PCNA was closely associated with HR-HPV and progressive CIN, most feasibly explained by the abrogation of normal cell cycle control by the E7 ongogene, reverting the p21(Cip1)-mediated inhibition of PCNA. However, the fact that PCNA is also expressed in normal squamous epithelium precludes the use of this marker as a potential screening tool for CC.

Structure of an archaeal PCNA1-PCNA2-FEN1 complex: elucidating PCNA subunit and client enzyme specificity

The archaeal/eukaryotic proliferating cell nuclear antigen (PCNA) toroidal clamp interacts with a host of DNA modifying enzymes, providing a stable anchorage and enhancing their respective processivities. Given the broad range of enzymes with which PCNA has been shown to interact, relatively little is known about the mode of assembly of functionally meaningful combinations of enzymes on the PCNA clamp. We have determined the X-ray crystal structure of the Sulfolobus solfataricus PCNA1-PCNA2 heterodimer, bound to a single copy of the flap endonuclease FEN1 at 2.9 A resolution. We demonstrate the specificity of interaction of the PCNA subunits to form the PCNA1-PCNA2-PCNA3 heterotrimer, as well as providing a rationale for the specific interaction of the C-terminal PIP-box motif of FEN1 for the PCNA1 subunit. The structure explains the specificity of the individual archaeal PCNA subunits for selected repair enzyme 'clients', and provides insights into the co-ordinated assembly of sequential enzymatic steps in PCNA-scaffolded DNA repair cascades.

The fellowship of the rings: distinct pools of proliferating cell nuclear antigen trimer at work

The proliferating cell nuclear antigen (PCNA) is a homotrimeric ring-shaped protein that, by encircling DNA, may function as a sliding platform for proteins participating in various DNA transactions. PCNA plays a fundamental role in DNA replication and repair, but also in postreplicative events, like DNA methylation, chromatin assembly and remodeling, sister chromatid cohesion, and coordinates these activities with cell cycle control. However, relevant aspects of PCNA function are still not well understood, like the role of PCNA in the association with partner proteins, and how multiple protein interactions are orchestrated. Based on emerging evidence, I suggest that 1) PCNA interacting proteins may be reclassified in three major categories, namely, a) cell cycle control; b) DNA replication/repair; c) chromatin regulation/transcription. 2) PCNA is a negative regulator, rather than a processivity/recruitment factor, of chromatin-modifying enzymes. 3) At DNA replication sites, PCNA function may be envisaged with a model of "dynamic hand-off" of interacting partners that rapidly and transiently exchange in a mutually exclusive manner, while cyclin-dependent kinase (Cdk) 2 (CDK2) is stably bound to PCNA. The partner exchange might occur through a conformational change of the PCNA/protein/DNA complex allowing CDK2 to phosphorylate the partner protein, thereby enabling its hand-off from PCNA.

Stoichiometric complex formation by proliferating cell nuclear antigen (PCNA) and its interacting protein: purification and crystallization of the DNA polymerase and PCNA monomer mutant complex from Pyrococcus furiosus

Replicative DNA polymerase interacts with processivity factors, the beta-subunit of DNA polymerase III or proliferating cell nuclear antigen (PCNA), in order to function with a long template DNA. The archaeal replicative DNA polymerase from Pyrococcus furiosus interacts with PCNA via its PCNA-interacting protein (PIP) motif at the C-terminus. The PCNA homotrimeric ring contains one PIP interacting site on each monomer and since the ring can accommodate up to three molecules simultaneously, formation of a stable stoichiometric complex of PCNA with its interacting protein has been difficult to control in vitro. A stable complex of the DNA polymerase with PCNA, using a PCNA monomer mutant, has been purified and crystallized. The best ordered crystal diffracted to 3.0 A resolution using synchrotron radiation. The crystals belong to space group P2(1)2(1)2, with unit-cell parameters a = 225.3, b = 123.3, c = 91.3 A.

Interaction of gp16 with pRNA and DNA for Genome Packaging by the Motor of Bacterial Virus phi29

One striking feature in the assembly of linear double-stranded (ds) DNA viruses is that their genome is translocated into a preformed protein coat via a motor involving two non-structural components with certain characteristics of ATPase. In bacterial virus phi29, these two components include the protein gp16 and a packaging RNA (pRNA). The structure and function of other phi29 motor components have been well elucidated; however, studies on the role of gp16 have been seriously hampered by its hydrophobicity and self-aggregation. Such problems caused by insolubility also occur in the study of other viral DNA-packaging motors. Contradictory data have been published regarding the role and stoichiometry of gp16, which has been reported to bind every motor component, including pRNA, DNA, gp3, DNA-gp3, connector, pRNA-free procapsid, and procapsid/pRNA complex. Such conflicting data from a binding assay could be due to the self-aggregation of gp16. Our recent advance to produce soluble and highly active gp16 has enabled further studies on gp16. It was demonstrated in this report that gp16 bound to DNA non-specifically. gp16 bound to the pRNA-containing procapsid much more strongly than to the pRNA-free procapsid. The domain of pRNA for gp16 interaction was the 5'/3' paired helical region. The C18C19A20 bulge that is essential for DNA packaging was found to be dispensable for gp16 binding. This result confirms the published model that pRNA binds to the procapsid with its central domain and extends its 5'/3' DNA-packaging domain for gp16 binding. It suggests that gp16 serves as a linkage between pRNA and DNA, and as an essential DNA-contacting component during DNA translocation. The data also imply that, with the exception of the C18C19A20 bulge, the main role of the 5'/3' helical double-stranded region of pRNA is not for procapsid binding but for binding to gp16.

Crystal structure of a DNA polymerase sliding clamp from a Gram-positive bacterium

Background

Sliding DNA clamps are processivity factors that are required for efficient DNA replication. DNA polymerases maintain proximity to nucleic acid templates by interacting with sliding clamps that encircle DNA and thereby link the polymerase enzyme to the DNA substrate. Although the structures of sliding clamps from Gram-negative bacteria (E. coli), eukaryotes, archaea, and T4-like bacteriophages are well-known, the structure of a sliding clamp from Gram-positive bacteria has not been reported previously.

Results

We have determined the crystal structure of the dimeric β subunit of the DNA polymerase III holoenzyme of Streptococcus pyogenes. The sliding clamp from this Gram-positive organism forms a ring-shaped dimeric assembly that is similar in overall structure to that of the sliding clamps from Gram-negative bacteria, bacteriophage T4, eukaryotes and archaea. The dimer has overall dimensions of ~90 Å × ~70 Å × ~25 Å with a central chamber that is large enough to accommodate duplex DNA. In comparison to the circular shape of other assemblies, the S. pyogenes clamp adopts a more elliptical structure.

Conclusion

The sequences of sliding clamps from S. pyogenes and E. coli are only 23% identical, making the generation of structural models for the S. pyogenes clamp difficult in the absence of direct experimental information. Our structure of the S. pyogenes β subunit completes the catalog of clamp structures from all the major sequence grouping of sliding clamps. The more elliptical rather than circular structure of the S. pyogenes clamp implies that the topological nature of encircling DNA, rather than a precise geometric shape, is the most conserved aspect for this family of proteins.

Roles of DNA Polymerases in Replication, Repair, and Recombination in Eukaryotes

The functioning of the eukaryotic genome depends on efficient and accurate DNA replication and repair. The process of replication is complicated by the ongoing decomposition of DNA and damage of the genome by endogenous and exogenous factors. DNA damage can alter base coding potential resulting in mutations, or block DNA replication, which can lead to double-strand breaks (DSB) and to subsequent chromosome loss. Replication is coordinated with DNA repair systems that operate in cells to remove or tolerate DNA lesions. DNA polymerases can serve as sensors in the cell cycle checkpoint pathways that delay cell division until damaged DNA is repaired and replication is completed. Eukaryotic DNA template-dependent DNA polymerases have different properties adapted to perform an amazingly wide spectrum of DNA transactions. In this review, we discuss the structure, the mechanism, and the evolutionary relationships of DNA polymerases and their possible functions in the replication of intact and damaged chromosomes, DNA damage repair, and recombination.

Effects of substitutions of arginine residues on the basic surface of herpes simplex virus UL42 support a role for DNA binding in processive DNA synthesis

The way that UL42, the processivity subunit of the herpes simplex virus DNA polymerase, interacts with DNA and promotes processivity remains unclear. A positively charged face of UL42 has been proposed to participate in electrostatic interactions with DNA that would tether the polymerase to a template without preventing its translocation via DNA sliding. An alternative model proposes that DNA binding by UL42 is not important for processivity. To investigate these issues, we substituted alanine for each of four conserved arginine residues on the positively charged surface. Each single substitution decreased the DNA binding affinity of UL42, with 14- to 30-fold increases in apparent dissociation constants. The mutant proteins exhibited no meaningful change in affinity for binding to the C terminus of the catalytic subunit of the polymerase, indicating that the substitutions exert a specific effect on DNA binding. The substitutions decreased UL42-mediated long-chain DNA synthesis by the polymerase in the same rank order in which they affected DNA binding, consistent with a role for DNA binding in polymerase processivity. Combining these substitutions decreased DNA binding further and impaired the complementation of a UL42 null virus in transfected cells. Additionally, using a revised mathematical model to analyze rates of dissociation of UL42 from DNAs of various lengths, we found that dissociation from internal sites, which would be the most important for tethering the polymerase, was relatively slow, even at ionic strengths that permit processive DNA synthesis by the holoenzyme. These data provide evidence that the basic surface of UL42 interacts with DNA and support a model in which DNA binding by UL42 is important for processive DNA synthesis.

Cellular DNA replicases: components and dynamics at the replication fork

DNA replicases are multicomponent machines that have evolved clever strategies to perform their function. Although the structure of DNA is elegant in its simplicity, the job of duplicating it is far from simple. At the heart of the replicase machinery is a heteropentameric AAA+ clamp-loading machine that couples ATP hydrolysis to load circular clamp proteins onto DNA. The clamps encircle DNA and hold polymerases to the template for processive action. Clamp-loader and sliding clamp structures have been solved in both prokaryotic and eukaryotic systems. The heteropentameric clamp loaders are circular oligomers, reflecting the circular shape of their respective clamp substrates. Clamps and clamp loaders also function in other DNA metabolic processes, including repair, checkpoint mechanisms, and cell cycle progression. Twin polymerases and clamps coordinate their actions with a clamp loader and yet other proteins to form a replisome machine that advances the replication fork.

Identification of the critical region in Replication factor C from Pyrococcus furiosus for the stable complex formation with Proliferating cell nuclear antigen and DNA

Replication factor C (RFC) and proliferating cell nuclear antigen (PCNA) are accessory proteins essential for processive DNA synthesis. The function of RFC is to load PCNA, a processivity factor of replicative DNA polymerases, onto primed DNA templates. The central hole of the PCNA homo-trimeric ring encircles doublestranded DNA, so that DNA polymerases can operate for DNA synthesis with PCNA along a DNA template. The Pyrococcus furiosus RFC (PfuRFC) consists of a small subunit (RFCS, 37kDa) and a large subunit (RFCL, 55kDa), which show significant sequence identity to the eukaryotic homologs. The C-terminal region of RFCL has an acidic cluster of about 30 amino acids, which consists mainly of glutamic acid residues, and a following basic cluster of 10 amino acids, which consists mainly of lysine residues. These clusters of charged amino acids, which precede the C-terminal consensus sequence, PIP (PCNA interacting protein)-box, are conserved in several archaeal RFCLs. The series of mutant PfuRFC containing the C-terminal deletions in RFCL were constructed. The mutational analyses showed that the charged cluster is not essential for loading of PCNA onto DNA. However, the region containing the basic cluster is important for the stable ternary (RFC-PCNA-DNA) complex formation.

Aphidicolin-resistant and -sensitive base excision repair in wild-type and DNA polymerase beta-defective mouse cells

Several DNA polymerases (Pols) can add complementary bases at the gap created during the base excision repair (BER). To characterize the BER resynthesis step, the repair of a single abasic site by wild-type and Pol beta-defective mouse cell extracts was analysed in the presence of aphidicolin, a specific inhibitor of replicative Pols. We show that there is a competition between distributive and processive Pols for the nucleotide addition at the primer terminus. In wild-type cell extracts, the initial nucleotide insertion involves mainly Pol beta but the elongation step is carried out by a replicative Pol. Conversely, in Pol beta-null cell extracts the synthesis step is carried out by a replicative Pol without any switching to an auxiliary polymerase. We present evidence that short-patch repair synthesis occurs even in the absence of both Pol beta and replicative Pols. Exogeneously added purified human Pol lambda was unable to stimulate this back-up synthesis.

Structural basis for recruitment of human flap endonuclease 1 to PCNA

Flap endonuclease-1 (FEN1) is a key enzyme for maintaining genomic stability and replication. Proliferating cell nuclear antigen (PCNA) binds FEN1 and stimulates its endonuclease activity. The structural basis of the FEN1-PCNA interaction was revealed by the crystal structure of the complex between human FEN1 and PCNA. The main interface involves the C-terminal tail of FEN1, which forms two beta-strands connected by a short helix, the betaA-alphaA-betaB motif, participating in beta-beta and hydrophobic interactions with PCNA. These interactions are similar to those previously observed for the p21CIP1/WAF1 peptide. However, this structure involving the full-length enzyme has revealed additional interfaces that are involved in the core domain. The interactions at the interfaces maintain the enzyme in an inactive 'locked-down' orientation and might be utilized in rapid DNA-tracking by preserving the central hole of PCNA for sliding along the DNA. A hinge region present between the core domain and the C-terminal tail of FEN1 would play a role in switching the FEN1 orientation from an inactive to an active orientation.

The bacteriophage T4 late-transcription coactivator gp33 binds the flap domain of Escherichia coli RNA polymerase

Transcription of bacteriophage T4 late genes requires concomitant DNA replication. T4 late promoters, which consist of a single 8-bp -10 motif, are recognized by a holoenzyme containing Escherichia coli RNA polymerase core and the T4-encoded promoter specificity subunit, gp55. Initiation of transcription at these promoters by gp55-holoenzyme is inefficient, but is greatly activated by the DNA-loaded DNA polymerase sliding clamp, gp45, and the coactivator, gp33. We report that gp33 attaches to the flap domain of the Escherichia coli RNA polymerase beta-subunit and that this interaction is essential for activation. The beta-flap also mediates recognition of -35 promoter motifs by binding to sigma(70) domain 4. The results suggest that gp33 is an analogue of sigma(70) domain 4 and that gp55 and gp33 together constitute two parts of the T4 late sigma. We propose a model for the role of the gp45 sliding clamp in activation of T4 late-gene transcription.

Structural and Thermodynamic Analysis of Human PCNA with Peptides Derived from DNA Polymerase-δ p66 Subunit and Flap Endonuclease-1

Human Proliferating Cellular Nuclear Antigen (hPCNA), a member of the sliding clamp family of proteins, makes specific protein-protein interactions with DNA replication and repair proteins through a small peptide motif termed the PCNA-interacting protein, or PIP-box. We solved the structure of hPCNA bound to PIP-box-containing peptides from the p66 subunit of the human replicative DNA polymerase-delta (452-466) at 2.6 A and of the flap endonuclease (FEN1) (331-350) at 1.85 A resolution. Both structures demonstrate that the pol-delta p66 and FEN1 peptides interact with hPCNA at the same site shown to bind the cdk-inhibitor p21(CIP1). Binding studies indicate that peptides from the p66 subunit of the pol-delta holoenzyme and FEN1 bind hPCNA from 189- to 725-fold less tightly than those of p21. Thus, the PIP-box and flanking regions provide a small docking peptide whose affinities can be readily adjusted in accord with biological necessity to mediate the binding of DNA replication and repair proteins to hPCNA.