NMR structure of an anti-gp120 antibody complex with a V3 peptide reveals a surface important for co-receptor binding

Structural and functional effects of phosphopriming and scaffolding in the kinase GSK-3β

Glycogen synthase kinase 3β (GSK-3β) targets specific signaling pathways in response to distinct upstream signals. We used structural and functional studies to dissect how an upstream phosphorylation step primes the Wnt signaling component β-catenin for phosphorylation by GSK-3β and how scaffolding interactions contribute to this reaction. Our crystal structure of GSK-3β bound to a phosphoprimed β-catenin peptide confirmed the expected binding mode of the phosphoprimed residue adjacent to the catalytic site. An aspartate phosphomimic in the priming site of β-catenin adopted an indistinguishable structure but reacted approximately 1000-fold slower than the native phosphoprimed substrate. This result suggests that substrate positioning alone is not sufficient for catalysis and that native phosphopriming interactions are necessary. We also obtained a structure of GSK-3β with an extended peptide from the scaffold protein Axin that bound with greater affinity than that of previously crystallized Axin fragments. This structure neither revealed additional contacts that produce the higher affinity nor explained how substrate interactions in the GSK-3β active site are modulated by remote Axin binding. Together, our findings suggest that phosphopriming and scaffolding produce small conformational changes or allosteric effects, not captured in the crystal structures, that activate GSK-3β and facilitate β-catenin phosphorylation. These results highlight limitations in our ability to predict catalytic activity from structure and have potential implications for the role of natural phosphomimic mutations in kinase regulation and phosphosite evolution.

Toward rational vaccine engineering

Technological revolutions in several fields have pushed the boundaries of vaccine design and provided new avenues for vaccine development. Next-generation vaccine platforms have shown promise in targeting challenging antigens, for which traditional approaches have been ineffective. With advances in protein engineering, structural biology, computational biology and immunology, the structural vaccinology approach, which uses protein structure information to develop immunogens, holds promise for future vaccine design. In this review, we highlight various vaccine development strategies, along with their advantages and limitations. We discuss the rational vaccine design approach, which focuses on structure-based vaccine design. Finally, we discuss antigen engineering using the epitope-scaffold approach, gaps in structural vaccinology, and remaining challenges in vaccine design.

Development of a Point-of-Care Assay for HIV-1 Viral Load Using Higher Refractive Index Antibody-Coated Microbeads

The detection of viruses using imaging techniques is challenging because of the weak scattering of light generated by the targets of sizes in the nanometer range. The system we have developed overcomes the light scattering problems by utilizing antibody-coated microbeads of higher index of refraction that can specifically bind with viruses and increase the acceptance angle. Using the new technology, we have developed a portable, cost-effective, and field-deployable platform for the rapid quantification of HIV-1 viral load for point-of-care (POC) settings. The system combines microfluidics with a wide field of view lensless imaging technology. Highly specific antibodies are functionalized to a glass slide inside a microchip to capture HIV-1 virions. The captured virions are then bound by antibody-conjugated microbeads, which have a higher refraction index. The microbeads-HIV-1 virions complexes generate diffraction patterns that are detected with a custom-built imaging setup and rapidly and accurately quantified by computational analysis. This platform technology enables fast nanoscale virus imaging and quantification from biological samples and thus can play a significant role in the detection and management of viral diseases.

Potential neutralizing antibodies discovered for novel corona virus using machine learning

The fast and untraceable virus mutations take lives of thousands of people before the immune system can produce the inhibitory antibody. The recent outbreak of COVID-19 infected and killed thousands of people in the world. Rapid methods in finding peptides or antibody sequences that can inhibit the viral epitopes of SARS-CoV-2 will save the life of thousands. To predict neutralizing antibodies for SARS-CoV-2 in a high-throughput manner, in this paper, we use different machine learning (ML) model to predict the possible inhibitory synthetic antibodies for SARS-CoV-2. We collected 1933 virus-antibody sequences and their clinical patient neutralization response and trained an ML model to predict the antibody response. Using graph featurization with variety of ML methods, like XGBoost, Random Forest, Multilayered Perceptron, Support Vector Machine and Logistic Regression, we screened thousands of hypothetical antibody sequences and found nine stable antibodies that potentially inhibit SARS-CoV-2. We combined bioinformatics, structural biology, and Molecular Dynamics (MD) simulations to verify the stability of the candidate antibodies that can inhibit SARS-CoV-2.

Potential neutralizing antibodies discovered for novel corona virus using machine learning

The fast and untraceable virus mutations take lives of thousands of people before the immune system can produce the inhibitory antibody. The recent outbreak of COVID-19 infected and killed thousands of people in the world. Rapid methods in finding peptides or antibody sequences that can inhibit the viral epitopes of SARS-CoV-2 will save the life of thousands. To predict neutralizing antibodies for SARS-CoV-2 in a high-throughput manner, in this paper, we use different machine learning (ML) model to predict the possible inhibitory synthetic antibodies for SARS-CoV-2. We collected 1933 virus-antibody sequences and their clinical patient neutralization response and trained an ML model to predict the antibody response. Using graph featurization with variety of ML methods, like XGBoost, Random Forest, Multilayered Perceptron, Support Vector Machine and Logistic Regression, we screened thousands of hypothetical antibody sequences and found nine stable antibodies that potentially inhibit SARS-CoV-2. We combined bioinformatics, structural biology, and Molecular Dynamics (MD) simulations to verify the stability of the candidate antibodies that can inhibit SARS-CoV-2.

Influence of the HIV GWG variant in the HIV infection progression in mono and HCV coinfected patients

The HIV subtype B is the most frequent in Brazil. The HIV subtype B' codes the amino acids glicine-tryptophan-glicine (GWG) instead of glicine-proline-glicine on the tip of gp120 V3 loop. This variant was associated to a slower HIV progression in mono-infected patients; however, there is no information in coinfected patients. This study evaluated the infection progression of HIV variant B' on the hepatitis C virus presence. RNA isolated from plasma of the 601 infected patients were used to human immunodeficiency virus (HIV) subtyping and to classify the virus according their syncytium-inducing ability. The HIV infection progression was evaluated by clinical and laboratorial data. The results showed a significant association between HIV B' variant and CD4 count and time of AIDS in HIV mono-infected patients. Notwithstanding the fact that we did not find a direct association between GWG variant and AIDS and in HIV coinfected patients no mitigating effect due to GWG presence was found. We did observe that the association between GWG variant and CD4 counts is lost in coinfected patients. This is first work showing influence of the HIV GWG variant in coinfected patients. Nevertheless, the presence of the GWG variant can indicate a better prognostic in the mono-infected patients.

Elucidation of potential sites for antibody engineering by fluctuation editing

Target-specific monoclonal antibodies can be routinely acquired, but the sequences of naturally acquired antibodies are not always affinity-matured and methods that increase antigen affinity are desirable. Most biophysical studies have focused on the complementary determining region (CDR), which directly contacts the antigen; however, it remains difficult to increase the affinity as much as desired. While strategies to alter the CDR to increase antibody affinity are abundant, those that target non-CDR regions are scarce. Here we describe a new method, designated fluctuation editing, which identifies potential mutation sites and engineers a high-affinity antibody based on conformational fluctuations observed by NMR relaxation dispersion. Our data show that relaxation dispersion detects important fluctuating residues that are not located in the CDR and that increase antigen–antibody affinity by point mutation. The affinity-increased mutants are shown to fluctuate less in their free form and to form a more packed structure in their antigen-bound form.

A non-canonical binding interface in the crystal structure of HIV-1 gp120 core in complex with CD4

Numerous crystal structures of HIV gp120 have been reported, alone or with receptor CD4 and cognate antibodies; however, no sole gp120/CD4 complex without stabilization by an antibody is available. Here, we report a crystal structure of the gp120/CD4 complex without the aid of an antibody from HIV-1 CRF07_BC, a strain circulating in China. Interestingly, in addition to the canonical binding surface, a second interacting interface was identified. A mutagenesis study on critical residues revealed that the stability of this interface is important for the efficiency of Env-mediated membrane fusion. Furthermore, we found that a broad neutralizing antibody, ibalizumab, which targets CD4 in the absence of gp120, occupies the same binding surface as the second interface identified here on gp120. Therefore, we identified the possibility of the involvement of a second gp120-CD4 interaction interface during viral entry, and also provided a reasonable explanation for the broad activity of neutralizing antibody ibalizumab.

Mimicking Protein-Protein Interactions through Peptide-Peptide Interactions: HIV-1 gp120 and CXCR4

We have recently designed a soluble synthetic peptide that functionally mimics the HIV-1 coreceptor CXCR4, which is a chemokine receptor that belongs to the family of seven-transmembrane GPCRs. This CXCR4 mimetic peptide, termed CX4-M1, presents the three extracellular loops (ECLs) of the receptor. In binding assays involving recombinant proteins, as well as in cellular infection assays, CX4-M1 was found to selectively recognize gp120 from HIV-1 strains that use CXCR4 for cell entry (X4 tropic HIV-1). Furthermore, anti-HIV-1 antibodies modulate this interaction in a molecular mechanism related to that of their impact on the gp120-CXCR4 interaction. We could now show that the selectivity of CX4-M1 pertains not only to gp120 from X4 tropic HIV-1, but also to synthetic peptides presenting the V3 loops of these gp120 proteins. The V3 loop is thought to be an essential part of the coreceptor binding site of gp120 that contacts the second ECL of the coreceptor. We were able to experimentally confirm this notion in binding assays using substitution analogs of CX4-M1 and the V3 loop peptides, respectively, as well as in cellular infection assays. These results indicate that interactions of the HIV-1 Env with coreceptors can be mimicked by synthetic peptides, which may be useful to explore these interactions at the molecular level in more detail.

Rabbit anti-HIV-1 monoclonal antibodies raised by immunization can mimic the antigen-binding modes of antibodies derived from HIV-1-infected humans

The rabbit is a commonly used animal model in studying antibody responses in HIV/AIDS vaccine development. However, no rabbit monoclonal antibodies (MAbs) have been developed previously to study the epitope-specific antibody responses against HIV-1 envelope (Env) glycoproteins, and little is known about how the rabbit immune system can mimic the human immune system in eliciting such antibodies. Here we present structural analyses of two rabbit MAbs, R56 and R20, against the third variable region (V3) of HIV-1 gp120. R56 recognizes the well-studied immunogenic region in the V3 crown, while R20 targets a less-studied region at the C terminus of V3. By comparison of the Fab/epitope complex structures of these two antibodies raised by immunization with that of the corresponding human antibodies derived from patients chronically infected with HIV-1, we found that rabbit antibodies can recognize immunogenic regions of gp120 and mimic the binding modes of human antibodies. This result can provide new insight into the use of the rabbit as an animal model in AIDS vaccine development.

HIV-1 V3 loop crown epitope-focused mimotope selection by patient serum from random phage display libraries: implications for the epitope structural features

The crown region of the V3 loop in HIV-1 that contains the conserved amino acid sequence GPGR/G is known as the principal neutralizing determinant due to the extraordinary ability of antibodies to this region to neutralize the virus. To complement the existing peptide models of this epitope, we describe a family of 18 phage-displayed peptides, which include linear 12mer and constrained 7mer peptides that was selected by screening random libraries with serum from HIV-1 subtype B-infected patients. The 7mer constrained peptides presented two conserved amino acid sequences: PR-L in N-terminus and GPG in the C-terminus. On the basis of these peptides we propose a mimotope model of the V3 crown epitope in which the PR-L and GPG sequences represent the two known epitope binding sites. The GPG, has the same function as the V3 crown GPGR sequence but without the involvement of the "R" despite its being considered as the signature of the epitope in B-subtype viruses. The PR-L contains a proline not existing in the epitope that is postulated to induce kinks in the backbones of all peptides and create a spatial element mimicking the N-terminal conformationally variable binding site. Rabbit serum to these mimotopes recognized the V3 peptides and moderately decreased the fusion between HIV-1 Env- and CD4-expressing Jurkat cells. This study proposes the efficient generation by means of patient sera of V3 epitope mimics validated by interaction with the antibodies to contemporary viruses induced in patients. The serum antibody-selectable mimotopes are sources of novel information on the fine structure-function properties of HIV-1 principal neutralizing domain and candidate anti-HIV-1 immunogens.

Synthetic virus-like particles and conformationally constrained peptidomimetics in vaccine design

Conformationally constrained peptidomimetics could be of great value in the design of vaccines targeting protective epitopes on viral and bacterial pathogens. But the poor immunogenicity of small synthetic molecules represents a serious obstacle for their use in vaccine development. Here, we show how a constrained epitope mimetic can be rendered highly immunogenic through multivalent display on the surface of synthetic virus-like nanoparticles. The target epitope is the V3 loop from the gp120 glycoprotein of HIV-1 bound to the neutralizing antibody F425-B4e8. The antibody-bound V3 loop adopts a β-hairpin conformation, which is effectively stabilized by transplantation onto a D-Pro-L-Pro template. The resulting mimetic after coupling to synthetic virus-like particles elicited antibodies in rabbits that recognized recombinant gp120. The elicited antibodies also blocked infection by the neutralization sensitive tier-1 strain MN of HIV-1, as well as engineered viruses with the V1V2 loop deleted; this result is consistent with screening of V3 by the V1V2 loop in intact trimeric viral gp120 spikes. The results provide new insights into HIV-1 vaccine design based on the V3 loop, and illustrate how knowledge from structural biology can be exploited for the design of constrained epitope mimetics, which can be delivered to the immune system by using a highly immunogenic synthetic nanoparticle delivery system.

The conformation and orientation of a 27-residue CCR5 peptide in a ternary complex with HIV-1 gp120 and a CD4-mimic peptide

Interaction of CC chemokine receptor 5 (CCR5) with the human immunodeficiency virus type 1 (HIV-1) gp120/CD4 complex involves its amino-terminal domain (Nt-CCR5) and requires sulfation of two to four tyrosine residues in Nt-CCR5. The conformation of a 27-residue Nt-CCR5 peptide, sulfated at Y10 and Y14, was studied both in its free form and in a ternary complex with deglycosylated gp120 and a CD4-mimic peptide. NMR experiments revealed a helical conformation at the center of Nt-CCR5(1-27), which is induced upon gp120 binding, as well as a helical propensity for the free peptide. A well-defined structure for the bound peptide was determined for residues 7-23, increasing by 2-fold the length of Nt-CCR5's known structure. Two-dimensional saturation transfer experiments and measurement of relaxation times highlighted Nt-CCR5 residues Y3, V5, P8-T16, E18, I23 and possibly D2 as the main binding determinant. A calculated docking model for Nt-CCR5(1-27) suggests that residues 2-22 of Nt-CCR5 interact with the bases of V3 and C4, while the C-terminal segment of Nt-CCR5(1-27) points toward the target cell membrane, reflecting an Nt-CCR5 orientation that differs by 180° from that of a previous model. A gp120 site that could accommodate (CCR5)Y3 in a sulfated form has been identified. The present model attributes a structural basis for binding interactions to all gp120 residues previously implicated in Nt-CCR5 binding. Moreover, the strong interaction of sulfated (CCR5)Tyr14 with (gp120)Arg440 revealed by the model and the previously found correlation between E322 and R440 mutations shed light on the role of these residues in HIV-1 phenotype conversion, furthering our understanding of CCR5 recognition by HIV-1.

Interaction of the HIV-1 gp120 viral protein V3 loop with bacterial lipopolysaccharide: a pattern recognition inhibition

HIV-1 represents an elusive target for therapeutic compounds due to its high rate of mutation. Targeting structural patterns instead of a constantly changing specific three-dimensional structure may represent an approach that is less sensitive to viral mutations. The V3 loop of gp120 of HIV-1, which is responsible for binding of viral gp120 to CCR5 or CXCR4 coreceptors, has already been identified as an effective target for the inhibition of viral entry. The peptide derived from the V3 loop of gp120 specifically interacts with the lipid A moiety of LPS, as does the full gp120 protein. NMR analysis of V3 in complex with LPS shows formation of an amphipathic turn. The interaction between LPS and V3 relies on the structural pattern, comprising a combination of hydrophobic and charge interactions, similar to the interaction between antimicrobial peptides and LPS. LPS inhibited binding of gp120 to the surface of target T cells. Nonendotoxic LPS antagonists inhibited viral infection, demonstrating the possibility for the development of an inhibitor of HIV-1 attachment to T cells based on the recognition of a conserved structural pattern.

An optimally constrained V3 peptide is a better immunogen than its linear homolog or HIV-1 gp120

Synthetic peptides offer an attractive option for development of a V3-directed vaccine. However, immunization with flexible linear peptides may result in an immune response to multiple conformations, many of which differ from the native conformation of the corresponding region in the protein. Here we show that optimization of the location of a disulfide bond in peptides constrained to mimic the beta-hairpin conformation of the V3, yields an immunogen that elicits a 30-fold stronger HIV-1 neutralizing response in rabbits compared with the homologous linear V3 peptide. The HIV-1 neutralizing response elicited by the optimally constrained peptide is also significantly stronger than that elicited by a gp120 construct in which the V3 is exposed. Neutralization of an HIV-1 strain that shares only 72% identity with the immunizing peptide was demonstrated. The most effective immunogen was also able to neutralize primary isolates that are more resistant to neutralization such as SS1196 and 6535.

NMR evidence of charge-dependent interaction between various PND V3 and CCR5 N-terminal peptides

The third variable (V3) loop is an important region of glycoprotein 120 (gp120) for many biological processes, as it contains the highly conserved GPGR sequence and it represents the binding site for human immunodeficiency virus 1 (HIV-1) antibodies and for CCR5 and CXCR4 host cell coreceptors. The interaction of the principal neutralizing determinant (PND) V3 with the chemokine receptor CCR5 N-terminal region has been reported to be crucial for HIV-1 infection. The goal of this study is to characterize the solution structures of three HIV-1 gp120 V3 subtype B peptides and their interaction with a nonsulfated N-terminal CCR5 peptide. NMR titration experiments revealed that the CCR5Nt-PND V3 interaction is dependent on the number of the positively charged V3 residues, which is in agreement with the observation that increase in positive charge in the V3 sequence correlates with the augmentation of the interaction. As expected for free peptides in solution, the peptides representing the PND V3 region of gp120 exhibit conformational flexibility, but they also exhibit a large number of NOEs which allowed convergence to a dominant conformation. The PND V3 peptides retain the U-turn conformation observed in the crystal structures of gp120 complexes independently of CCR5 presence. The interaction of different regions of the CCR5Nt peptide is gradually increasing proportionally to the positive charge increase in the V3 peptides. The data demonstrate that the PND V3 and CCR5Nt peptide sequences have propensities for interaction even in the absence of sulfated tyrosines and that their binding and selectivity is determined by simple electrostatic attraction mechanisms.

Mimicking the structure of the V3 epitope bound to HIV-1 neutralizing antibodies

The third variable region (V3) of the HIV-1 envelope glycoprotein gp120 is a target for virus neutralizing antibodies. The V3 sequence determines whether the virus will manifest R5 or X4 phenotypes and use the CCR5 or CXCR4 chemokine coreceptor, respectively. Previous NMR studies revealed that both R5- and X4-V3 peptides bound to antibodies 0.5beta and 447-52D form beta-hairpin conformations with the GPGR segment at the turn. In contrast, in their free form, linear V3 peptides and a cyclic peptide consisting of the entire 35-residue V3 loop were highly unstructured in aqueous solution. Herein we evaluated a series of synthetic disulfide constrained V3-peptides in which the position of the disulfide bonds, and therefore the ring size, was systematically varied. NMR structures determined for singly and doubly disulfide constrained V3-peptides in aqueous solution were compared with those found for unconstrained V3(JRFL) and V3(IIIB) peptides bound to 447-52D and to 0.5beta, respectively. Our study indicated that cyclic V3 peptides manifested significantly reduced conformational space compared to their linear homologues and that in all cases cyclic peptides exhibited cross-strand interactions suggestive of beta-hairpin-like structures. Nevertheless, the singly constrained V3-peptides retained significant flexibility and did not form an idealized beta-hairpin. Incorporation of a second disulfide bond results in significant overall rigidity, and in one case, a structure close to that of V3(MN) peptide bound to 447-52D Fab was assumed and in another case a structure close to that formed by the linear V3(IIIB) peptide bound to antibody 0.5beta was assumed.

Epitope mapping of antibody-antigen complexes by nuclear magnetic resonance spectroscopy

Nuclear magnetic resonance (NMR) is a very powerful tool for determining the boundaries of peptide epitopes recognized by antibodies. NMR can be used to study antibodies in complexes that exhibit a wide range of binding affinities from very weak and transient to very tight. Choice of the specific method depends upon the dissociation constant, especially the ligand off-rate.Epitope mapping by NMR is based on the difference in mobility between the amino acid residues of a peptide antigen that interact tightly with the antibody and residues outside the epitope that do not interact with the antibody. The interacting peptide residues become considerably immobilized upon binding. Their mobility will resemble that of the antibody's residues. Several NMR methods were developed based on these characteristics. In this chapter we discuss some of these methods, including dynamic filtering, comparison of (1)H-(15)N HSQC peaks' intensities, transverse relaxation time, measurements of (1)H-(15)N nuclear Overhauser effect (NOE) values, and measurements of T (1rho) relaxation time.

Structure of antibody F425-B4e8 in complex with a V3 peptide reveals a new binding mode for HIV-1 neutralization

F425-B4e8 (B4e8) is a monoclonal antibody isolated from a human immunodeficiency virus type 1 (HIV-1)-infected individual that recognizes the V3 variable loop on the gp120 subunit of the viral envelope spike. B4e8 neutralizes a subset of HIV-1 primary isolates from subtypes B, C and D, which places this antibody among the very few human anti-V3 antibodies with notable cross-neutralizing activity. Here, the crystal structure of the B4e8 Fab' fragment in complex with a 24-mer V3 peptide (RP142) at 2.8 A resolution is described. The complex structure reveals that the antibody recognizes a novel V3 loop conformation, featuring a five-residue alpha-turn around the conserved GPGRA apex of the beta-hairpin loop. In agreement with previous mutagenesis analyses, the Fab' interacts primarily with V3 through side-chain contacts with just two residues, Ile(P309) and Arg(P315), while the remaining contacts are to the main chain. The structure helps explain how B4e8 can tolerate a certain degree of sequence variation within V3 and, hence, is able to neutralize an appreciable number of different HIV-1 isolates.

Fifteen years of env C2V3C3 evolution in six individuals infected clonally with human immunodeficiency virus type 1

The study of the evolution of human immunodeficiency virus type 1 (HIV-1) requires blood samples collected longitudinally and data on the approximate time point of infection. Although these requirements were fulfilled in several previous studies, the infectious sources were either unknown or heterogeneous genetically. In the present study, HIV-1 env C2V3C3 (nt 7029-7315) evolution was examined retrospectively in a cohort of hemophiliacs. Compared to other cohorts, the area of interest here was the infection of six hemophiliacs by the same virus strain, that is, the infecting viruses shared an identical genome. As expected, divergence from the founder sequence as well as interpatient divergence of the predominant virus strains increased significantly over time. Based on the V3 nucleotide sequences, CCR5 usage was predicted exclusively throughout the whole period of infection in all patients. Interestingly, common patterns of viral evolution were detected in the patients of the cohort. Four amino acid substitutions within the V3 loop emerged and persisted subsequently in five (positions 305 and 308 of the HXB2 gp120 reference sequence) and six patients (positions 325 and 328 in HXB2 gp120), respectively. These common changes within the V3 loop are likely to be enforced by HIV-1 specific immune response.

Structural analysis of the HIV-1 gp120 V3 loop: application to the HIV-Haiti isolates

The model describing the structure and conformational preferences of the HIV-Haiti V3 loop in the geometric spaces of Cartesian coordinates and dihedral angles was generated in terms of NMR spectroscopy data published in literature. To this end, the following successive steps were put into effect: (i) the NMR-based 3D structure for the HIV-Haiti V3 loop in water was built by computer modeling methods; (ii) the conformations of its irregular segments were analyzed and the secondary structure elements identified; and (iii) to reveal a common structural motifs in the HIV-Haiti V3 loop regardless of its environment variability, the simulated structure was collated with the one deciphered previously for the HIV-Haiti V3 loop in a water/trifluoroethanol (TFE) mixed solvent. As a result, the HIV-Haiti V3 loop was found to offer the highly variable fragment of gp120 sensitive to its environment whose changes trigger the large-scale structural rearrangements, bringing in substantial altering the secondary and tertiary structures of this functionally important site of the virus envelope. In spite of this fact, over half of amino acid residues that reside, for the most part, in the functionally important regions of the gp120 protein and may present promising targets for AIDS drug researches, were shown to preserve their conformational states in the structures under review. In particular, the register of these amino acids holds Asn-25 that is critical for the virus binding with primary cell receptor CD4 as well as Arg-3 that is critical for utilization of CCR5 co-receptor and heparan sulfate proteoglycans. The conservative structural motif embracing one of the potential sites of the gp120 N-linked glycosylation was detected, which seems to be a promising target for the HIV-1 drug design. The implications are discussed in conjunction with the literature data on the biological activity of the individual amino acids for the HIV-1 gp120 V3 loop.

Structural basis for coreceptor selectivity by the HIV type 1 V3 loop

The third variable region (V3) of the HIV-1 surface glycoprotein, gp120, plays a central role in the interaction of the virus envelope with the cell surface chemokine receptors, triggering membrane fusion and virus entry into human lymphocytes and macrophages. The CXCR4 and CCR5 chemokine receptors are used by "X4-tropic" and "R5-tropic" viruses, respectively. Recently, the crown of the V3 loop was shown to bear a close structural homology to the beta2-beta3 loop in the CXC and CC chemokines, the natural ligands of CXCR4 and CCR5, respectively. This homology can serve as the foundation for 3D molecular modeling of the V3 loops from primary isolates whose coreceptor usage was experimentally defined. The modeling revealed a charged "patch" on the surface of V3 that correlates with coreceptor usage. This V3 surface patch is positively charged in X4-tropic viruses and negatively charged or neutral in R5-tropic viruses, and is formed by two amino acids, at position 11 and at position 24 or 25; amino acids 11 and 24 or 11 and 25 contact each other in 3D space. Residues at positions 11 and 25 were known previously to influence coreceptor usage, and the charge of the residues at these two positions is often used to predict viral tropism. However, we found that the predictive value of using the charge of residues 11, 24, and 25 to identify X4 or R5 tropism was improved over using only the charge of residues 11 and 25. Thus, the data suggest a new " 11/24/25 rule" : a positively charged amino acid at position 11, 24, or 25 defines X4; otherwise R5. This rule gave an overall predictive value of 94% for 217 viruses whose tropism had been determined experimentally as either X4 or R5. The results have additional implications for the design of HIV therapeutics, vaccines, and strategies for monitoring disease progression.

Dynamic domains and geometrical properties of HIV-1 gp120 during conformational changes induced by CD4 binding

The HIV-1 gp120 exterior envelope glycoprotein undergoes a series of conformational rearrangements while sequentially interacting with the receptor CD4 and coreceptor CCR5 or CXCR4 on the surface of host cells to initiate virus entry. Both the crystal structures of the HIV-1 gp120 core bound by the CD4 and antigen 17b, and the SIV gp120 core pre-bound by the CD4 are known. We have performed dynamic domain studies on the homology models of the CD4-bound and unliganded HIV-1 gp120 with modeled V3 and V4 loops to explore details of conformational changes, hinge axes, and hinge bending regions in the gp120 structures upon CD4 binding. Four dynamic domains were clustered and intricately motional modes for domain pairs were discovered. Together with the detailed comparative analyses of geometrical properties between the unliganded and liganded gp120 models, an induced fit model was proposed to explain events accompanying the CD4 engagement to the gp120, which provided new insight into the dynamics of the molecular induced binding mechanism that complements the molecular dynamics and crystallographic studies.

Molecular switch for alternative conformations of the HIV-1 V3 region: implications for phenotype conversion

HIV-1 coreceptor usage plays a critical role in virus tropism and pathogenesis. A switch from CCR5- to CXCR4-using viruses occurs during the course of HIV-1 infection and correlates with subsequent disease progression. A single mutation at position 322 within the V3 loop of the HIV-1 envelope glycoprotein gp120, from a negatively to a positively charged residue, was found to be sufficient to switch an R5 virus to an X4 virus. In this study, the NMR structure of the V3 region of an R5 strain, HIV-1(JR-FL), in complex with an HIV-1-neutralizing antibody was determined. Positively charged and negatively charged residues at positions 304 and 322, respectively, oppose each other in the beta-hairpin structure, enabling a favorable electrostatic interaction that stabilizes the postulated R5 conformation. Comparison of the R5 conformation with the postulated X4 conformation of the V3 region (positively charged residue at position 322) reveals that electrostatic repulsion between residues 304 and 322 in X4 strains triggers the observed one register shift in the N-terminal strand of the V3 region. We posit that electrostatic interactions at the base of the V3 beta-hairpin can modulate the conformation and thereby influence the phenotype switch. In addition, we suggest that interstrand cation-pi interactions between positively charged and aromatic residues induce the switch to the X4 conformation as a result of the S306R mutation. The existence of three pairs of identical (or very similar) amino acids in the V3 C-terminal strand facilitates the switch between the R5 and X4 conformations.

Crystal structures of human immunodeficiency virus type 1 (HIV-1) neutralizing antibody 2219 in complex with three different V3 peptides reveal a new binding mode for HIV-1 cross-reactivity

Human monoclonal antibody 2219 is a neutralizing antibody isolated from a human immunodeficiency virus type 1-infected individual. 2219 was originally selected for binding to a V3 fusion protein and can neutralize primary isolates from subtypes B, A, and F. Thus, 2219 represents a cross-reactive, human anti-V3 antibody. Fab 2219 binds to one face of the variable V3 beta-hairpin, primarily contacting conserved residues on the N-terminal beta-strand of V3, leaving the V3 crown or tip largely accessible. Three V3/2219 complexes reveal the antibody-bound conformations for both the N- and C-terminal regions that flank the V3 crown and illustrate how twisting of the V3 loop alters the relative dispositions and pairing of the amino acids in the adjacent V3 beta-strands and how the antibody can accommodate V3 loops with different sequences.

Conformational Preferences of the HIV-1 Principal Neutralizing Determinant

The model describing the conformational properties of the HIV-1 principal neutralizing determinant in the geometric space of dihedrals was generated in terms of NMR spectroscopy data published in literature. To gain an object in view, the following successive steps were put into effect: (i) the NMR-based local structures for the HIV(MN) V3 loop were determined in water and in a mixed water/trifluoroethanol (TFE) solvent (7:3), (ii) in either case, the conformations of its irregular segments were analyzed and the secondary structure elements identified, (iii) to appreciate the degree of conformational mobility of the stretch of interest, the simulated structures were compared with each other, (iv) to detect the amino acids retaining their conformations inside the diverse HIV-1 isolates, the structures computed were collated with the one derived previously for the V3 loop from Thailand isolate, and (v) as a matter of record, the structurally rigid residues, that may present the forward-looking targets for AIDS drug researches, were revealed. Summing up the principal results arising from these studies, the following conclusions were drawn: I. The HIV(MN) V3 loop offers the highly mobile fragment of gp120 sensitive to its environment whose changes trigger the large-scale structural reforms, bringing in substantial altering the secondary structure of this functionally important site of the virus envelope. II. In water, it exhibits extended site 1-14 separated by double beta-turn 15-20 with unordered region 21-35. III. Adding the TFE gives rise to destruction of the regular structure in the V3 loop N-terminal, stimulates the formation of 3(10)-helix in site 24-31, and affects also its central region 20-25 forming the HIV-1 immunogenic crown. IV. Regardless of statistically significant differences between local structures of the HIV(MN) V3 loop in water and in water/TFE solution, over one-third of residues keeps their conformational states; the register of these amino acids comprises Asn-25 critical for virus binding with primary cell receptor CD4 as well as Arg-3 critical for utilization of CCR5 coreceptor. V. There are no conserved structural motifs within the V3 loops from Minnesota and Thailand HIV-1 strains. However, perceptible portion of amino acids (more than 35%), including those appearing in the functionally important regions of gp120, holds the values of dihedral angles in which case. The implications are discussed in conjunction with the data on the experimental observations for the HIV-1 principal neutralizing determinant.

Isolation of TAK-779-resistant HIV-1 from an R5 HIV-1 GP120 V3 Loop Library

The human immunodeficiency virus (HIV-1) envelope glycoprotein (GP) 120 interacts with CD4 and the CCR5 coreceptor for viral entry. The V3 loop in GP120 is a crucial region for determining coreceptor usage during viral entry, and a variety of amino acid substitutions has been observed in clinical isolates. To construct an HIV-1 V3 loop library, we chose 10 amino acid positions in the V3 loop and incorporated random combinations (27,648 possibilities) of the amino acid substitutions derived from 31 R5 viruses into the V3 loop of HIV-1(JR-FL) proviral DNA. The constructed HIV-1 library contained 6.6 x 10(6) independent clones containing a set of 0-10 amino acid substitutions in the V3 loop. To address whether restricted steric alteration in the V3 loop could confer resistance to an entry inhibitor, TAK-779, we selected entry inhibitor-resistant HIV-1 by increasing the concentration of TAK-779 from 0.10 to 0.30 microM in PM1-CCR5 cells with high expression of CCR5. The selected viruses at passage 8 contained five amino acid substitutions in the V3 loop without any other mutations in GP120 and showed 15-fold resistance compared with the parental virus. These results indicated that a certain structure of the V3 loop containing amino acid substitutions derived from 31 R5 viruses can contribute to the acquisition of resistance to entry inhibitors binding to CCR5. Taken together, this type of HIV-1 V3 loop library is useful for isolating and analyzing the specific biological features of HIV-1 with respect to alterations of the V3 loop structure.

Malaria parasite-inhibitory antibody epitopes on Plasmodium falciparum merozoite surface protein-1(19) mapped by TROSY NMR

Plasmodium falciparum merozoite surface protein 1 (MSP1)(19), the C-terminal fragment of merozoite surface protein 1, is a leading candidate antigen for development of a vaccine against the blood stages of the malaria parasite. Many human and animal studies have indicated the importance of MSP1(19)-specific immune responses. Anti-MSP1(19) antibodies can prevent invasion of red blood cells by P. falciparum parasites in vitro. However, the fine specificity of anti-MSP1(19) antibodies is also important, as only a fraction of monoclonal antibodies (mAbs) have parasite-inhibitory activity in vitro. Human sera from malaria-endemic locations show strong MSP1(19) reactivity, but individual serum samples vary greatly in inhibitory activity. NMR is an excellent method for studying protein-protein interactions, and has been used widely to study binding of peptides representing known epitopes (as well as non-protein antigens) to antibodies and antibody fragments. The recent development of transverse relaxation optimized spectroscopy (TROSY) and related methods has significantly extended the maximum size limit of molecules that can be studied by NMR. TROSY NMR experiments produce high quality spectra of Fab complexes that allow the mapping of epitopes by the chemical shift perturbation technique on a complete, folded protein antigen such as MSP1(19). We studied the complexes of P. falciparum MSP1(19) with Fab fragments from three monoclonal antibodies. Two of these antibodies have parasite-inhibitory activity in vitro, while the third is non-inhibitory. NMR epitope mapping showed a close relationship between binding sites for the two inhibitory antibodies, distinct from the location of the non-inhibitory antibody. Together with a previously published crystal structure of the P. falciparum MSP1(19) complex with the Fab fragment of another non-inhibitory antibody, these results revealed a surface on MSP1(19) where inhibitory antibodies bind. This information will be useful in evaluating the anti-MSP1(19) immune response in natural populations from endemic areas, as well as in vaccine trials. It will also be valuable for optimizing the MSP1(19) antigen by rational vaccine design. This work also shows that TROSY NMR techniques are very effective for mapping conformational epitopes at the level of individual residues on small- to medium-sized proteins, provided that the antigen can be expressed in a system amenable to stable isotope labelling, such as bacteria or yeast.

Resolution of the novel immune-type receptor gene cluster in zebrafish

The novel immune-type receptor (NITR) genes encode a unique multigene family of leukocyte regulatory receptors, which possess an extracellular Ig variable (V) domain and may function in innate immunity. Artificial chromosomes that encode zebrafish NITRs have been assembled into a contig spanning approximately 350 kb. Resolution of the complete NITR gene cluster has led to the identification of eight previously undescribed families of NITRs and has revealed the presence of C-type lectins within the locus. A maximum haplotype of 36 NITR genes (138 gene sequences in total) can be grouped into 12 distinct families, including inhibitory and activating receptors. An extreme level of interindividual heterozygosity is reflected in allelic polymorphisms, haplotype variation, and family-specific isoform complexity. In addition, the exceptional diversity of NITR sequences among species suggests divergent evolution of this multigene family with a birth-and-death process of member genes. High-confidence modeling of Nitr V-domain structures reveals a significant shift in the spatial orientation of the Ig fold, in the region of highest interfamily variation, compared with Ig V domains. These studies resolve a complete immune gene cluster in zebrafish and indicate that the NITRs represent the most complex family of activating/inhibitory surface receptors thus far described.

Dual Spatial Folds and Different Local Structures of the HIV-1 Immunogenic Crown in Various Virus Isolates

Local and global structural properties of the HIV-1 principal neutralizing epitope were studied in terms of NMR spectroscopy data reported in literature for the HIV-Haiti and HIV-RF isolates. To this effect, the NMR-based method comprising a probabilistic model of protein conformation in conjunction with the molecular mechanics and quantum chemical computations was used for determining the ensembles of conformers matching the NMR requirements and energy criteria. As a matter of record, the high resolution 3D structure models were constructed for the HIV-Haiti and HIV-RF immunogenic crowns, and their geometric parameters were collated with the ones of conformers derived previously for describing the conformational features of immunogenic tip of gp120 from Thailand and MN HIV-1 strains. The HIV-1 neutralization site was demonstrated to constitute in water solution highly flexible system sensitive to its environment. This inference is completely valid for the geometric space of dihedral angles where statistically significant differences in local structures of simulated conformers have been found for all virus isolates of interest. In spite of this fact, the stretch analyzed was shown to manifest a certain conservatism in the space of atomic coordinates, building up in four HIV-1 isolates two spatial folds similar to those observed in crystal for the V3 loop peptides bound to different neutralizing Fabs. The results are discussed in the light of literature data on HIV-1 neutralizing epitope structure.

Solid-state NMR yields structural constraints on the V3 loop from HIV-1 Gp120 bound to the 447-52D antibody Fv fragment

Solid-state NMR measurements were performed on the complex of an 18-residue peptide derived from the V3 loop sequence of the gp120 envelope glycoprotein of the HIV-1 MN strain with Fv fragments of the human anti-gp120 monoclonal antibody 447-52D in a frozen glycerol/water solution. The peptide was uniformly (15)N- and (13)C-labeled in a 7-residue segment containing the conserved GPGR motif in the epitope. (15)N and (13)C NMR chemical shift assignments for the labeled segment were obtained from two-dimensional (13)C-(13)C and (15)N-(13)C magic-angle spinning NMR spectra. Reductions in (13)C NMR line widths and changes in chemical shifts upon complex formation indicate the adoption of a well-defined, antibody-dependent structure. Intramolecular (13)C-(13)C distances in the complex, which constrain the peptide backbone and side chain conformations in the GPGR motif, were determined from an analysis of rotational resonance (RR) data. Structural constraints from chemical shifts and RR measurements are in good agreement with recent solution NMR and crystallographic studies of this system, although differences regarding structural ordering of certain peptide side chains are noted. These experiments explore and help delineate the utility of solid state NMR techniques as structural probes of peptide/protein complexes in general, potentially including membrane-associated hormone/receptor complexes.

Atomic insight into the CD4 binding-induced conformational changes in HIV-1 gp120

The entry of HIV-1 into a target cell requires gp120 and receptor CD4 as well as coreceptor CCR5/CXCR4 recognition events associated with conformational changes of the involved proteins. The binding of CD4 to gp120 is the initiation step of the whole process involving structural rearrangements that are crucial for subsequent pathways. Despite the wealth of knowledge about the gp120/CD4 interactions, details of the conformational changes occurring at this stage remain elusive. We have performed molecular dynamics simulations in explicit solvent based on the gp120/CD4/CD4i crystal structure in conjunction with modeled V3 and V4 loops to gain insight into the dynamics of the binding process. Three differentiated interaction modes between CD4 and gp120 were found, which involve electrostatics, hydrogen bond and van der Waals networks. A "binding funnel" model is proposed based on the dynamical nature of the binding interface together with a CD4-attraction gradient centered in gp120 at the CD4-Phe43-binding cavity. Distinct dynamical behaviors of free and CD4-bound gp120 were monitored, which likely represent the ground and pre-fusogenic states, respectively. The transition between these states revealed concerted motions in gp120 leading to: i) loop contractions around the CD4-Phe43-insertion cavity; ii) stabilization of the four-stranded "bridging sheet" structure; and iii) translocation and clustering of the V3 loop and the bridging sheet leading to the formation of the coreceptor binding site. Our results provide new insight into the dynamic of the underlying molecular recognition mechanism that complements the biochemical and structural studies.

Identifying epitopes of HIV-1 that induce protective antibodies

As with most pathogens, HIV-1 induces a polyclonal antibody response to a wide array of epitopes on different viral proteins. Studies of polyclonal sera have helped to identify several epitopes on HIV-1 envelope glycoproteins that induce protective antibodies.

Antibodies to several constant regions of the virus envelope induce neutralizing antibodies, but because of the poor immunogenicity of some of these epitopes, the rare structure of neutralizing antibodies to these epitopes, or the preponderance of antibodies to particular epitopes that are non-neutralizing rather than neutralizing, targeting each of these epitopes with vaccine constructs presents difficult challenges.

Antibodies to variable regions of gp120, such as V1, V2 and V3, have long been considered irrelevant to vaccine design. However, there are conserved features in the stem of the V1/V2 loop and in the V3 loop that have crucial functions in virus infectivity and explain how antibodies to these regions can be crossreactive. These conserved elements within the variable regions might therefore be relevant targets for vaccines.

HIV-1 strains exist that are not neutralized by monoclonal antibodies but are neutralized by pooled sera from HIV-1⁺ individuals. This indicates that there might be neutralizing epitopes that have not yet been identified.

Present vaccine protocols induce antibodies to many epitopes rather than focusing the immune response on epitopes that will induce protective antibodies. Given that several neutralizing epitopes in gp120 and gp41 have been identified, it might be advantageous to direct the antibody response to these protective epitopes.

It is highly unlikely that a single construct will protect against all subtypes of HIV-1. Given the continuing evolution of the virus and the spread of subtypes throughout the world, the question is how to choose which strains, and how many, need to be represented in a vaccine to give maximum protection.

During the past 20 years, the pendulum of opinion in the HIV-1 vaccine field has swung between two extremes, initially favouring the induction of antibodies only, and subsequently favouring the induction of cell-mediated immune responses only. At present, the consensus seems to be that induction of both humoral and cellular immunity by an HIV-1 vaccine will be required to achieve maximum protection. One obstacle to the development of an effective HIV-1 vaccine has been the difficulty in inducing broadly reactive, potent antibodies with protective functions. Defining epitopes and designing immunogens that will induce these antibodies is one of the main challenges that now confronts the HIV-1 vaccine field.

The v3 loop is accessible on the surface of most human immunodeficiency virus type 1 primary isolates and serves as a neutralization epitope

Antibodies (Abs) against the V3 loop of the human immunodeficiency virus type 1 gp120 envelope glycoprotein were initially considered to mediate only type-specific neutralization of T-cell-line-adapted viruses. However, recent data show that cross-neutralizing V3 Abs also exist, and primary isolates can be efficiently neutralized with anti-V3 monoclonal Abs (MAbs). The neutralizing activities of anti-V3 polyclonal Abs and MAbs may, however, be limited due to antigenic variations of the V3 region, a lack of V3 exposure on the surface of intact virions, or Ab specificity. For clarification of this issue, a panel of 32 human anti-V3 MAbs were screened for neutralization of an SF162-pseudotyped virus in a luciferase assay. MAbs selected with a V3 fusion protein whose V3 region mimics the conformation of the native virus were significantly more potent than MAbs selected with V3 peptides. Seven MAbs were further tested for neutralizing activity against 13 clade B viruses in a single-round peripheral blood mononuclear cell assay. While there was a spectrum of virus sensitivities to the anti-V3 MAbs observed, 12 of the 13 viruses were neutralized by one or more of the anti-V3 MAbs. MAb binding to intact virions correlated significantly with binding to solubilized gp120s and with the potency of neutralization. These results demonstrate that the V3 loop is accessible on the native virus envelope, that the strength of binding of anti-V3 Abs correlates with the potency of neutralization, that V3 epitopes may be shared rather than type specific, and that Abs against the V3 loop, particularly those targeting conformational epitopes, can mediate the neutralization of primary isolates.

Structural Rationale for the Broad Neutralization of HIV-1 by Human Monoclonal Antibody 447-52D

447-52D is a human monoclonal antibody isolated from a heterohybridoma derived from an HIV-1-infected individual. This antibody recognizes the hypervariable gp120 V3 loop, and neutralizes both X4 and R5 primary isolates, making it one of the most effective anti-V3 antibodies characterized to date. The crystal structure of the 447-52D Fab in complex with a 16-mer V3 peptide at 2.5 A resolution reveals that the peptide beta hairpin forms a three-stranded mixed beta sheet with complementarity determining region (CDR) H3, with most of the V3 side chains exposed to solvent. Sequence specificity is conferred through interaction of the type-II turn (residues GPGR) at the apex of the V3 hairpin with the base of CDR H3. This novel mode of peptide-antibody recognition enables the antibody to bind to many different V3 sequences where only the GPxR core epitope is absolutely required.

Design and synthesis of peptides that bind alpha-bungarotoxin with high affinity and mimic the three-dimensional structure of the binding-site of acetylcholine receptor

Alpha-bungarotoxin (alpha-BTX) is a highly toxic snake neurotoxin that binds to acetylcholine receptor (AChR) at the neuromuscular junction, and is a potent inhibitor of this receptor. In the following we review multi-phase research of the design, synthesis and structure analysis of peptides that bind alpha-BTX and inhibit its binding to AChR. Structure-based design concomitant with biological information of the alpha-BTX/AChR system yielded 13-mer peptides that bind to alpha-BTX with high affinity and are potent inhibitors of alpha-BTX binding to AChR (IC(50) of 2 nM). X-Ray and NMR spectroscopy reveal that the high-affinity peptides fold into an anti-parallel beta-hairpin structure when bound to alpha-BTX. The structures of the bound peptides and the homologous loop of acetylcholine binding protein, a soluble analog of AChR, are remarkably similar. Their superposition indicates that the toxin wraps around the binding-site loop, and in addition, binds tightly at the interface of two of the receptor subunits and blocks access of acetylcholine to its binding site. The procedure described in this article may serve as a paradigm for obtaining high-affinity peptides in biochemical systems that contain a ligand and a receptor molecule.

Recurring conformation of the human immunodeficiency virus type 1 gp120 V3 loop

The crystal structure of the human immunodeficiency virus type 1 (HIV-1) neutralizing, murine Fab 83.1 in complex with an HIV-1 gp120 V3 peptide has been determined to 2.57 A resolution. The conformation of the V3 loop peptide in complex with Fab 83.1 is very similar to V3 conformations seen previously with two other neutralizing Fabs, 50.1 and 59.1. The repeated identification of this same V3 conformation in complex with three very different, neutralizing antibodies indicates that it is a highly preferred structure for V3 loops on some strains of the HIV-1 virus.

Expression, purification, and isotope labeling of the Fv of the human HIV-1 neutralizing antibody 447-52D for NMR studies

The Fv is the smallest antigen binding fragment of the antibody and is made of the variable domains of the light and heavy chains, V(L) and V(H), respectively. The 26-kDa Fv is amenable for structure determination in solution using multi-dimensional hetero-nuclear NMR spectroscopy. The human monoclonal antibody 447-52D neutralizes a broad spectrum of HIV-1 isolates. This anti-HIV-1 antibody elicited in an infected patient is directed against the third variable loop (V3) of the envelope glycoprotein (gp120) of the virus. The V3 loop is an immunodominant neutralizing epitope of HIV-1. To obtain the 447-52D Fv for NMR studies, an Escherichia coli bicistronic expression vector for the heterodimeric 447-52D Fv and vectors for single chain Fv and individually expressed V(H) and V(L) were constructed. A pelB signal peptide was linked to the antibody genes to enable secretion of the expressed polypeptides into the periplasm. For easy cloning of any antibody gene without potential modification of the antibody sequence, restriction sites were introduced in the pelB sequence and following the termination codon. A set of oligonucleotides that prime the leader peptide genes of all potential antibody human antibodies were designed as backward primers. The forward primers for the V(L) and V(H) were based on constant region sequences. The 447-52D Fv could not be expressed either by a bicistronic vector or as single chain Fv, probably due to its toxicity to Escherichia coli. High level of expression was obtained by individual expression of the V(H) and the V(L) chains, which were then purified and recombined to generate a soluble and active 447-52D Fv fragment. The V(L) of mAb 447-52D was uniformly labeled with 13C and 15N nuclei (U-13C/15N). Preliminary NMR spectra demonstrate that structure determination of the recombinant 447-52D Fv and its complex with V3 peptides is feasible.

Alternative conformations of HIV-1 V3 loops mimic beta hairpins in chemokines, suggesting a mechanism for coreceptor selectivity

The V3 loop of the HIV-1 envelope glycoprotein gp120 is involved in binding to the CCR5 and CXCR4 coreceptors. The structure of an HIV-1(MN) V3 peptide bound to the Fv of the broadly neutralizing human monoclonal antibody 447-52D was solved by NMR and found to be a beta hairpin. This structure of V3(MN) was found to have conformation and sequence similarities to beta hairpins in CD8 and CCR5 ligands MIP-1alpha, MIP-1beta, and RANTES and differed from the beta hairpin of a V3(IIIB) peptide bound to the strain-specific murine anti-gp120(IIIB) antibody 0.5beta. In contrast to the structure of the bound V3(MN) peptide, the V3(IIIB) peptide resembles a beta hairpin in SDF-1, a CXCR4 ligand. These data suggest that the 447-52D-bound V3(MN) and the 0.5beta-bound V3(IIIB) structures represent alternative V3 conformations responsible for selective interactions with CCR5 and CXCR4, respectively.

Identification of conserved and variable structures in the human immunodeficiency virus gp120 glycoprotein of importance for CXCR4 binding

CD4 and the chemokine receptors, CXCR4 and CCR5, serve as receptors for human immunodeficiency virus type 1 (HIV-1). Binding of the HIV-1 gp120 envelope glycoprotein to the chemokine receptors normally requires prior interaction with CD4. Mapping the determinants on gp120 for the low-affinity interaction with CXCR4 has been difficult due to the nonspecific binding of this viral glycoprotein to cell surfaces. Here we examine the binding of a panel of gp120 mutants to paramagnetic proteoliposomes displaying CXCR4 on their surfaces. We show that the gp120 beta19 strand and third variable (V3) loop contain residues important for CXCR4 interaction. Basic residues from both elements, as well as a conserved hydrophobic residue at the V3 tip, contribute to CXCR4 binding. Removal of the gp120 V1/V2 variable loops allows the envelope glycoprotein to bind CXCR4 in a CD4-independent manner. These results indicate that although some variable gp120 residues contribute to the specific binding to CCR5 or CXCR4, gp120 elements common to CXCR4- or CCR5-using strains are involved in the interaction with both coreceptors.

The crown and stem of the V3 loop play distinct roles in human immunodeficiency virus type 1 envelope glycoprotein interactions with the CCR5 coreceptor

Human immunodeficiency virus type 1 envelope glycoprotein gp120 interacts with CD4 and the CCR5 coreceptor in order to mediate viral entry. A CD4-induced surface on gp120, primarily composed of residues in the V3 loop and the C4 domain, interacts with CCR5. In the present study, we generated envelope glycoproteins comprising chimeric V3 loops and/or V3 loops with deletions and studied their binding to CCR5 amino-terminal domain (Nt)-based sulfopeptides and cell surface CCR5, as well as their ability to mediate viral entry. We thus delineated two functionally distinct domains of the V3 loop, the V3 stem and the V3 crown. The V3 stem alone mediates soluble gp120 binding to the CCR5 Nt. In contrast, both the V3 stem and crown are required for soluble gp120 binding to cell surface CCR5. Within the context of a virion, however, the V3 crown alone determines coreceptor usage. Our data support a two-site gp120-CCR5 binding model wherein the V3 crown and stem interact with distinct regions of CCR5 in order to mediate viral entry.

Reductionism and the search for structure-function relationships in antibody molecules

One of the claims of reductionism is that it can explain all the features of living systems by an analysis of their physico-chemical constituents. Such a claim disregards the existence in biological systems of emergent properties that do not exist in their isolated components but which allow autonomous organisms to be directively organized in a self-regulated and integrated manner. It is not possible to describe biological systems adequately without using functional language that is meaningless in the physical sciences. The description of biological functions is also an essential part of immunology and functional explanations are more useful than causal explanations also in this discipline. Since causality is not a relation between a material object and an event, the structure of an antibody cannot be the cause of its binding activity. When structure-function relationships are analysed, the search should be for correlations rather than for causal relations. Methods used to find correlations between the atomic structure of antibody binding sites and their binding activity are mostly based on mutagenesis studies. Since the effect of any mutation depends on the molecular context, it is usually very difficult to predict the effects of multiple mutations on antibody function. Our knowledge of the molecular basis of antigen-antibody recognition has led to the expectation that it may be possible to develop new vaccines using molecular design principles. Such unwarranted hopes arise because of a confusion between antigenicity and immunogenicity. Although knowledge of antibody structure is of little use in vaccine design, it may help to develop therapeutic inhibitors and antibodies effective in the passive immunotherapy of viral infection.

Crystal structure of a human rhinovirus that displays part of the HIV-1 V3 loop and induces neutralizing antibodies against HIV-1

We report the 2.7 A resolution structure of a chimeric rhinovirus, MN-III-2, that displays part of the HIV-1 gp120 V3 loop and elicits HIV-neutralizing antibodies. The V3 loop insert is dominated by two type I beta turns. The structures of two adjacent tripeptides resemble those of analogous segments in three Fab/V3 loop peptide complexes. Although two of the three corresponding antibodies bind and neutralize MN-III-2 well, only one of the three can bind without significant rearrangement. These results suggest that the V3 loop insert: (1) can share some local conformational similarity to V3 loop sequences presented on different structural frameworks; (2) must be able to adopt multiple conformations, even in a relatively constrained environment; and (3) may mimic the conformational variability of the epitope on HIV-1, increasing the likelihood of eliciting appropriate neutralizing immune responses.

A beta -hairpin structure in a 13-mer peptide that binds alpha -bungarotoxin with high affinity and neutralizes its toxicity

Snake-venom alpha-bungarotoxin is a member of the alpha-neurotoxin family that binds with very high affinity to the nicotinic acetylcholine receptor (AChR) at the neuromuscular junction. The structure of the complex between alpha-bungarotoxin and a 13-mer peptide (WRYYESSLEPYPD) that binds the toxin with high affinity, thus inhibiting its interactions with AChR with an IC(50) of 2 nM, has been solved by (1)H-NMR spectroscopy. The bound peptide folds into a beta-hairpin structure created by two antiparallel beta-strands, which combine with the already existing triple-stranded beta-sheet of the toxin to form a five-stranded intermolecular, antiparallel beta-sheet. Peptide residues Y3(P), E5(P), and L8(P) have the highest intermolecular contact area, indicating their importance in the binding of alpha-bungarotoxin; W1(P), R2(P), and Y4(P) also contribute significantly to the binding. A large number of characteristic hydrogen bonds and electrostatic and hydrophobic interactions are observed in the complex. The high-affinity peptide exhibits inhibitory potency that is better than any known peptide derived from AChR, and is equal to that of the whole alpha-subunit of AChR. The high degree of sequence similarity between the peptide and various types of AChRs implies that the binding mode found within the complex might possibly mimic the receptor binding to the toxin. The design of the high-affinity peptide was based on our previous findings: (i) the detection of a lead peptide (MRYYESSLKSYPD) that binds alpha-bungarotoxin, using a phage-display peptide library, (ii) the information about the three-dimensional structure of alpha-bungarotoxin/lead-peptide complex, and (iii) the amino acid sequence analysis of different AChRs.