Combined EM/X-ray imaging yields a quasi-atomic model of the adenovirus-related bacteriophage PRD1 and shows key capsid and membrane interactions

Electron microscopy holdings of the Protein Data Bank: the impact of the resolution revolution, new validation tools, and implications for the future

As a discipline, structural biology has been transformed by the three-dimensional electron microscopy (3DEM) "Resolution Revolution" made possible by convergence of robust cryo-preservation of vitrified biological materials, sample handling systems, and measurement stages operating a liquid nitrogen temperature, improvements in electron optics that preserve phase information at the atomic level, direct electron detectors (DEDs), high-speed computing with graphics processing units, and rapid advances in data acquisition and processing software. 3DEM structure information (atomic coordinates and related metadata) are archived in the open-access Protein Data Bank (PDB), which currently holds more than 11,000 3DEM structures of proteins and nucleic acids, and their complexes with one another and small-molecule ligands (~ 6% of the archive). Underlying experimental data (3DEM density maps and related metadata) are stored in the Electron Microscopy Data Bank (EMDB), which currently holds more than 21,000 3DEM density maps. After describing the history of the PDB and the Worldwide Protein Data Bank (wwPDB) partnership, which jointly manages both the PDB and EMDB archives, this review examines the origins of the resolution revolution and analyzes its impact on structural biology viewed through the lens of PDB holdings. Six areas of focus exemplifying the impact of 3DEM across the biosciences are discussed in detail (icosahedral viruses, ribosomes, integral membrane proteins, SARS-CoV-2 spike proteins, cryogenic electron tomography, and integrative structure determination combining 3DEM with complementary biophysical measurement techniques), followed by a review of 3DEM structure validation by the wwPDB that underscores the importance of community engagement.

Membrane-containing virus particles exhibit the mechanics of a composite material for genome protection

The protection of the viral genome during extracellular transport is an absolute requirement for virus survival and replication. In addition to the almost universal proteinaceous capsids, certain viruses add a membrane layer that encloses their double-stranded (ds) DNA genome within the protein shell. Using the membrane-containing enterobacterial virus PRD1 as a prototype, and a combination of nanoindentation assays by atomic force microscopy and finite element modelling, we show that PRD1 provides a greater stability against mechanical stress than that achieved by the majority of dsDNA icosahedral viruses that lack a membrane. We propose that the combination of a stiff and brittle proteinaceous shell coupled with a soft and compliant membrane vesicle yields a tough composite nanomaterial well-suited to protect the viral DNA during extracellular transport.

Role of Condensing Particles in Polymer Confinement: A Model for Virus-Packed "Minichromosomes"

Confined mixtures of a polymer and nonspecifically binding particles (condensers) are studied as models for viruses containing double-stranded DNA (polymer) and condensing proteins (particles). We explore a model in which all interactions between the packed content (polymer and particles) and its confinement are purely repulsive, with only a short-range attraction between the condensers and polymer to simulate binding. In the range of physical parameters applicable to viruses, the model predicts reduction of pressure in the system effected by the condensers, despite the reduction in free volume. Condensers are found to be interspersed throughout the spherical confinement and only partially wrapped in the polymer, which acts as an effective medium for the condenser interactions. Crowding of the viral interior influences the DNA and protein organization, producing a picture inconsistent with a chromatin-like, beads-on-a-string structure. The model predicts an organization of the confined interior compatible with experimental data on unperturbed adenoviruses and polyomaviruses, at the same time providing insight into the role of condensing proteins in the viral infectious cycles of related viral families.

Structure of faustovirus, a large dsDNA virus

Many viruses protect their genome with a combination of a protein shell with or without a membrane layer. Here we describe the structure of faustovirus, the first DNA virus (to our knowledge) that has been found to use two protein shells to encapsidate and protect its genome. The crystal structure of the major capsid protein, in combination with cryo-electron microscopy structures of two different maturation stages of the virus, shows that the outer virus shell is composed of a double jelly-roll protein that can be found in many double-stranded DNA viruses. The structure of the repeating hexameric unit of the inner shell is different from all other known capsid proteins. In addition to the unique architecture, the region of the genome that encodes the major capsid protein stretches over 17,000 bp and contains a large number of introns and exons. This complexity might help the virus to rapidly adapt to new environments or hosts.

Transmission electron microscopy and the molecular structure of icosahedral viruses

The field of structural virology developed in parallel with methodological advances in X-ray crystallography and cryo-electron microscopy. At the end of the 1970s, crystallography yielded the first high resolution structure of an icosahedral virus, the T=3 tomato bushy stunt virus at 2.9Å. It took longer to reach near-atomic resolution in three-dimensional virus maps derived from electron microscopy data, but this was finally achieved, with the solution of complex icosahedral capsids such as the T=25 human adenovirus at ∼3.5Å. Both techniques now work hand-in-hand to determine those aspects of virus assembly and biology that remain unclear. This review examines the trajectory followed by EM imaging techniques in showing the molecular structure of icosahedral viruses, from the first two-dimensional negative staining images of capsids to the latest sophisticated techniques that provide high resolution three-dimensional data, or snapshots of the conformational changes necessary to complete the infectious cycle.

Distribution of DNA-condensing protein complexes in the adenovirus core

Genome packing in adenovirus has long evaded precise description, since the viral dsDNA molecule condensed by proteins (core) lacks icosahedral order characteristic of the virus protein coating (capsid). We show that useful insights regarding the organization of the core can be inferred from the analysis of spatial distributions of the DNA and condensing protein units (adenosomes). These were obtained from the inspection of cryo-electron tomography reconstructions of individual human adenovirus particles. Our analysis shows that the core lacks symmetry and strict order, yet the adenosome distribution is not entirely random. The features of the distribution can be explained by modeling the condensing proteins and the part of the genome in each adenosome as very soft spheres, interacting repulsively with each other and with the capsid, producing a minimum outward pressure of ∼0.06 atm. Although the condensing proteins are connected by DNA in disrupted virion cores, in our models a backbone of DNA linking the adenosomes is not required to explain the experimental results in the confined state. In conclusion, the interior of an adenovirus infectious particle is a strongly confined and dense phase of soft particles (adenosomes) without a strictly defined DNA backbone.

A structural model of the genome packaging process in a membrane-containing double stranded DNA virus

Two crucial steps in the virus life cycle are genome encapsidation to form an infective virion and genome exit to infect the next host cell. In most icosahedral double-stranded (ds) DNA viruses, the viral genome enters and exits the capsid through a unique vertex. Internal membrane-containing viruses possess additional complexity as the genome must be translocated through the viral membrane bilayer. Here, we report the structure of the genome packaging complex with a membrane conduit essential for viral genome encapsidation in the tailless icosahedral membrane-containing bacteriophage PRD1. We utilize single particle electron cryo-microscopy (cryo-EM) and symmetry-free image reconstruction to determine structures of PRD1 virion, procapsid, and packaging deficient mutant particles. At the unique vertex of PRD1, the packaging complex replaces the regular 5-fold structure and crosses the lipid bilayer. These structures reveal that the packaging ATPase P9 and the packaging efficiency factor P6 form a dodecameric portal complex external to the membrane moiety, surrounded by ten major capsid protein P3 trimers. The viral transmembrane density at the special vertex is assigned to be a hexamer of heterodimer of proteins P20 and P22. The hexamer functions as a membrane conduit for the DNA and as a nucleating site for the unique vertex assembly. Our structures show a conformational alteration in the lipid membrane after the P9 and P6 are recruited to the virion. The P8-genome complex is then packaged into the procapsid through the unique vertex while the genome terminal protein P8 functions as a valve that closes the channel once the genome is inside. Comparing mature virion, procapsid, and mutant particle structures led us to propose an assembly pathway for the genome packaging apparatus in the PRD1 virion.

Cryo-electron tomography of bacterial viruses

Bacteriophage particles contain both simple and complex macromolecular assemblages and machines that enable them to regulate the infection process under diverse environmental conditions with a broad range of bacterial hosts. Recent developments in cryo-electron tomography (cryo-ET) make it possible to observe the interactions of bacteriophages with their host cells under native-state conditions at unprecedented resolution and in three-dimensions. This review describes the application of cryo-ET to studies of bacteriophage attachment, genome ejection, assembly and egress. Current topics of investigation and future directions in the field are also discussed.

Combined approaches to study virus structures

A virus particle must work as a safe box for protecting its genome, but at the same time it has to undergo dramatic conformational changes in order to preserve itself by propagating in a cell infection. Thus, viruses are miniaturized wonders whose structural complexity requires them to be investigated by a combination of different techniques that can tackle both static and dynamic processes. In this chapter we will illustrate how major structural techniques such as X-ray crystallography and electron microscopy have been and can be combined with other techniques to determine the structure of complex viruses. The power of these hybrid method approaches are revealed through the various examples provided.

Structure of Sputnik, a virophage, at 3.5-Å resolution

"Sputnik" is a dsDNA virus, referred to as a virophage, that is coassembled with Mimivirus in the host amoeba. We have used cryo-EM to produce an electron density map of the icosahedral Sputnik virus at 3.5-Å resolution, sufficient to verify the identity of most amino acids in the capsid proteins and to establish the identity of the pentameric protein forming the fivefold vertices. It was also shown that the virus lacks an internal membrane. The capsid is organized into a T = 27 lattice in which there are 260 trimeric capsomers and 12 pentameric capsomers. The trimeric capsomers consist of three double "jelly-roll" major capsid proteins creating pseudohexameric capsomer symmetry. The pentameric capsomers consist of five single jelly-roll proteins. The release of the genome by displacing one or more of the pentameric capsomers may be the result of a low-pH environment. These results suggest a mechanism of Sputnik DNA ejection that probably also occurs in other big icosahedral double jelly-roll viruses such as Adenovirus. In this study, the near-atomic resolution structure of a virus has been established where crystallization for X-ray crystallography was not feasible.

Latest insights on adenovirus structure and assembly

Adenovirus (AdV) capsid organization is considerably complex, not only because of its large size (~950 Å) and triangulation number (pseudo T = 25), but also because it contains four types of minor proteins in specialized locations modulating the quasi-equivalent icosahedral interactions. Up until 2009, only its major components (hexon, penton, and fiber) had separately been described in atomic detail. Their relationships within the virion, and the location of minor coat proteins, were inferred from combining the known crystal structures with increasingly more detailed cryo-electron microscopy (cryoEM) maps. There was no structural information on assembly intermediates. Later on that year, two reports described the structural differences between the mature and immature adenoviral particle, starting to shed light on the different stages of viral assembly, and giving further insights into the roles of core and minor coat proteins during morphogenesis [1,2]. Finally, in 2010, two papers describing the atomic resolution structure of the complete virion appeared [3,4]. These reports represent a veritable tour de force for two structural biology techniques: X-ray crystallography and cryoEM, as this is the largest macromolecular complex solved at high resolution by either of them. In particular, the cryoEM analysis provided an unprecedented clear picture of the complex protein networks shaping the icosahedral shell. Here I review these latest developments in the field of AdV structural studies.

Effective stiffening of DNA due to nematic ordering causes DNA molecules packed in phage capsids to preferentially form torus knots

Observation that DNA molecules in bacteriophage capsids preferentially form torus type of knots provided a sensitive gauge to evaluate various models of DNA arrangement in phage heads. Only models resulting in a preponderance of torus knots could be considered as close to reality. Recent studies revealed that experimentally observed enrichment of torus knots can be qualitatively reproduced in numerical simulations that include a potential inducing nematic arrangement of tightly packed DNA molecules within phage capsids. Here, we investigate what aspects of the nematic arrangement are crucial for inducing formation of torus knots. Our results indicate that the effective stiffening of DNA by the nematic arrangement not only promotes knotting in general but is also the decisive factor in promoting formation of DNA torus knots in phage capsids.

Principles of virus structural organization

Viruses, the molecular nanomachines infecting hosts ranging from prokaryotes to eukaryotes, come in different sizes, shapes, and symmetries. Questions such as what principles govern their structural organization, what factors guide their assembly, how these viruses integrate multifarious functions into one unique structure have enamored researchers for years. In the last five decades, following Caspar and Klug's elegant conceptualization of how viruses are constructed, high-resolution structural studies using X-ray crystallography and more recently cryo-EM techniques have provided a wealth of information on structures of a variety of viruses. These studies have significantly -furthered our understanding of the principles that underlie structural organization in viruses. Such an understanding has practical impact in providing a rational basis for the design and development of antiviral strategies. In this chapter, we review principles underlying capsid formation in a variety of viruses, emphasizing the recent developments along with some historical perspective.

Three-dimensional structure and function of the Paramecium bursaria chlorella virus capsid

A cryoelectron microscopy 8.5 Å resolution map of the 1,900 Å diameter, icosahedral, internally enveloped Paramecium bursaria chlorella virus was used to interpret structures of the virus at initial stages of cell infection. A fivefold averaged map demonstrated that two minor capsid proteins involved in stabilizing the capsid are missing in the vicinity of the unique vertex. Reconstruction of the virus in the presence of host chlorella cell walls established that the spike at the unique vertex initiates binding to the cell wall, which results in the enveloped nucleocapsid moving closer to the cell. This process is concurrent with the release of the internal viral membrane that was linked to the capsid by many copies of a viral membrane protein in the mature infectous virus. Simultaneously, part of the trisymmetrons around the unique vertex disassemble, probably in part because two minor capsid proteins are absent, causing Paramecium bursaria chlorella virus and the cellular contents to merge, possibly as a result of enzyme(s) within the spike assembly. This may be one of only a few recordings of successive stages of a virus while infecting a eukaryotic host in pseudoatomic detail in three dimensions.

In vivo assembly of an archaeal virus studied with whole-cell electron cryotomography

We applied whole-cell electron cryotomography to the archaeon Sulfolobus infected by Sulfolobus turreted icosahedral virus (STIV), which belongs to the PRD1-Adeno lineage of dsDNA viruses. STIV infection induced the formation of pyramid-like protrusions with sharply defined facets on the cell surface. They had a thicker cross-section than the cytoplasmic membrane and did not contain an exterior surface protein layer (S-layer). Intrapyramidal bodies often occupied the volume of the pyramids. Mature virions, procapsids without genome cores, and partially assembled particles were identified, suggesting that the capsid and inner membrane coassemble in the cytoplasm to form a procapsid. A two-class reconstruction using a maximum likelihood algorithm demonstrated that no dramatic capsid transformation occurred upon DNA packaging. Virions tended to form tightly packed clusters or quasicrystalline arrays while procapsids mostly scattered outside or on the edges of the clusters. The study revealed vivid images of STIV assembly, maturation, and particle distribution in cell.

Structure and uncoating of immature adenovirus

Maturation via proteolytic processing is a common trait in the viral world and is often accompanied by large conformational changes and rearrangements in the capsid. The adenovirus protease has been shown to play a dual role in the viral infectious cycle: (a) in maturation, as viral assembly starts with precursors to several of the structural proteins but ends with proteolytically processed versions in the mature virion, and (b) in entry, because protease-impaired viruses have difficulties in endosome escape and uncoating. Indeed, viruses that have not undergone proteolytic processing are not infectious. We studied the three-dimensional structure of immature adenovirus particles as represented by the adenovirus type 2 thermosensitive mutant ts1 grown under non-permissive conditions and compared it with the mature capsid. Our three-dimensional electron microscopy maps at subnanometer resolution indicate that adenovirus maturation does not involve large-scale conformational changes in the capsid. Difference maps reveal the locations of unprocessed peptides pIIIa and pVI and help define their role in capsid assembly and maturation. An intriguing difference appears in the core, indicating a more compact organization and increased stability of the immature cores. We have further investigated these properties by in vitro disassembly assays. Fluorescence and electron microscopy experiments reveal differences in the stability and uncoating of immature viruses, both at the capsid and core levels, as well as disassembly intermediates not previously imaged.

Particle assembly and ultrastructural features associated with replication of the lytic archaeal virus sulfolobus turreted icosahedral virus

Little is known about the replication cycle of archaeal viruses. We have investigated the ultrastructural changes of Sulfolobus solfataricus P2 associated with infection by Sulfolobus turreted icosahedral virus (STIV). A time course of a near synchronous STIV infection was analyzed using both scanning and transmission electron microscopy. Assembly of STIV particles, including particles lacking DNA, was observed within cells, and fully assembled STIV particles were visible by 30 h postinfection (hpi). STIV was determined to be a lytic virus, causing cell disruption beginning at 30 hpi. Prior to cell lysis, virus infection resulted in the formation of pyramid-like projections from the cell surface. These projections, which have not been documented in any other host-virus system, appeared to be caused by the protrusion of the cell membrane beyond the bordering S-layer. These structures are thought to be sites at which progeny virus particles are released from infected cells. Based on these observations of lysis, a plaque assay was developed for STIV. From these studies we propose an overall assembly model for STIV.

Chemical modification of viruses and virus-like particles

Protein capsids derived from viruses may be modified by methods, generated, isolated, and purified on large scales with relative ease. In recent years, methods for their chemical derivatization have been employed to broaden the properties and functions accessible to investigators desiring monodisperse, atomic-resolution structures on the nanometer scale. Here we review the reactions and methods used in these endeavors, including the modification of lysine, cysteine, and tyrosine side chains, as well as the installation of unnatural amino acids, with particular attention to the special challenges imposed by the polyvalency and size of virus-based scaffolds.

Torque teno virus: an improved indicator for viral pathogens in drinking waters

BACKGROUND

Currently applied indicator organism systems, such as coliforms, are not fully protective of public health from enteric viruses in water sources. Waterborne disease outbreaks have occurred in systems that tested negative for coliforms, and positive coliform results do not necessarily correlate with viral risk. It is widely recognized that bacterial indicators do not co-occur exclusively with infectious viruses, nor do they respond in the same manner to environmental or engineered stressors. Thus, a more appropriate indicator of health risks from infectious enteric viruses is needed.

PRESENTATION OF THE HYPOTHESIS

Torque teno virus is a small, non-enveloped DNA virus that likely exhibits similar transport characteristics to pathogenic enteric viruses. Torque teno virus is unique among enteric viral pathogens in that it appears to be ubiquitous in humans, elicits seemingly innocuous infections, and does not exhibit seasonal fluctuations or epidemic spikes. Torque teno virus is transmitted primarily via the fecal-oral route and can be assayed using rapid molecular techniques. We hypothesize that Torque teno virus is a more appropriate indicator of viral pathogens in drinking waters than currently used indicator systems based solely on bacteria.

TESTING THE HYPOTHESIS

To test the hypothesis, a multi-phased research approach is needed. First, a reliable Torque teno virus assay must be developed. A rapid, sensitive, and specific PCR method using established nested primer sets would be most appropriate for routine monitoring of waters. Because PCR detects both infectious and inactivated virus, an in vitro method to assess infectivity also is needed. The density and occurrence of Torque teno virus in feces, wastewater, and source waters must be established to define spatial and temporal stability of this potential indicator. Finally, Torque teno virus behavior through drinking water treatment plants must be determined with co-assessment of traditional indicators and enteric viral pathogens to assess whether correlations exist.

IMPLICATIONS OF THE HYPOTHESIS

If substantiated, Torque teno virus could provide a completely new, reliable, and efficient indicator system for viral pathogen risk. This indicator would have broad application to drinking water utilities, watershed managers, and protection agencies and would provide a better means to assess viral risk and protect public health.

Folding and assembly of large macromolecular complexes monitored by hydrogen-deuterium exchange and mass spectrometry

Recent advances in protein mass spectrometry (MS) have enabled determinations of hydrogen deuterium exchange (HDX) in large macromolecular complexes. HDX-MS became a valuable tool to follow protein folding, assembly and aggregation. The methodology has a wide range of applications in biotechnology ranging from quality control for over-expressed proteins and their complexes to screening of potential ligands and inhibitors. This review provides an introduction to protein folding and assembly followed by the principles of HDX and MS detection, and concludes with selected examples of applications that might be of interest to the biotechnology community.

Tale of two spikes in bacteriophage PRD1

Structural comparisons between bacteriophage PRD1 and adenovirus have revealed an evolutionary relationship that has contributed significantly to current ideas on virus phylogeny. However, the structural organization of the receptor-binding spike complex and how the different symmetry mismatches are mediated between the spike-complex proteins are not clear. We determined the architecture of the PRD1 spike complex by using electron microscopy and three-dimensional image reconstruction of a series of PRD1 mutants. We constructed an atomic model for the full-length P5 spike protein by using comparative modeling. P5 was shown to be bound directly to the penton base protein P31. P5 and the receptor-binding protein P2 form two separate spikes, interacting with each other near the capsid shell. P5, with a tumor necrosis factor-like head domain, may have been responsible for host recognition before capture of the current receptor-binding protein P2.

Nanoporous crystals of chicken embryo lethal orphan (CELO) adenovirus major coat protein, hexon

CELO (chicken embryo lethal orphan) virus is an avian adenovirus that is being developed as a gene transfer vector. Its trimeric major coat protein (942 residues, 106,709 Da) has 42% sequence identity to human adenovirus type 2 (AdH2) hexon and 45% to AdH5 hexon. For structural studies, the growth of CELO virus has been optimized, and its hexon purified and crystallized. The hexon crystals, the first non-human example, diffract to 3.9 A resolution. Molecular replacement using the AdH5 model was used to identify the location of the CELO hexon within the unit cell. There is one hexon monomer in the asymmetric unit of the trigonal space group P321 (a=b=157.8 A, c=114.2 A, gamma=120 degrees) and the solvent content is 67.8%. The hexons pack in a hexagonal honeycomb so that large approximately 100 A diameter channels run through the entire crystal. This remarkable property of the crystals lends itself to their exploitation as a nanomaterial. Structural studies on CELO will elucidate the differences between avian and human adenoviruses and contribute to a better understanding of adenoviruses with non-human hosts.

Efficient DNA packaging of bacteriophage PRD1 requires the unique vertex protein P6

The assembly of bacteriophage PRD1 proceeds via formation of empty procapsids containing an internal lipid membrane, into which the linear double-stranded DNA genome is subsequently packaged. The packaging ATPase P9 and other putative packaging proteins have been shown to be located at a unique vertex of the PRD1 capsid. Here, we describe the isolation and characterization of a suppressor-sensitive PRD1 mutant deficient in the unique vertex protein P6. Protein P6 was found to be an essential part of the PRD1 packaging machinery; its absence leads to greatly reduced packaging efficiency. Lack of P6 was not found to affect particle assembly, because in the P6-deficient mutant infection, wild-type (wt) amounts of particles were produced, although most were empty. P6 was determined not to be a specificity factor, as the few filled particles seen in the P6-deficient infection contained only PRD1-specific DNA. The presence of P6 was not necessary for retention of DNA in the capsid once packaging had occurred, and P6-deficient DNA-containing particles were found to be stable and infectious, albeit not as infectious as wt PRD1 virions. A packaging model for bacteriophage PRD1, based on previous results and those obtained in this study, is presented.

Determination of astigmatism in TEM images

We have developed a new two-step algorithm to determine the astigmatism of images from transmission electron microscopes (TEMs). Instead of computing the radial average of the power spectrum, we divide the power spectrum of a TEM image 1 to m (typically 32) sectors. We use a technique based on perturbation analysis of the contrast transfer function (CTF) to assimilate sector averages of the power spectrum of an image, which are incoherent in the presence of astigmatism, to a coherent radial average corresponding to a nominal defocus value. This is based on the fact that small defocus change from a nominal value can be considered to be equivalent to a perturbation on the spatial frequency spectra. Thus, instead of measuring the angular defocus variations, we optimise the frequency change required to obtain a coherent radial average. Numerically, this is achieved by minimizing sigma(2)/sigma(1) of a matrix formed from the sector averages, where sigma(i) denotes the ith singular value of the matrix. After the minimisation procedure, the second singular value should be very small compared with the first singular value, indicating that the matrix is nearly rank unity. In the second step, the nominal defocus can be obtained from the coherent radial average using any good defocus estimation program, which assumes zero astigmatism. The defocus value at a sector can be obtained from this nominal defocus value and one of the parameters from the unconstrained optima. Our algorithm is tested on astigmatic images of carbon film, 2D crystals of bacteriorhodopsin and cryo-images of HIV cores.

Classification of single-projection reconstructions for cryo-electron microscopy data of icosahedral viruses

We present a novel strategy for classification of heterogeneous electron microscopy data of icosahedral virus particles. The effectiveness of the procedure, which is based on classification of single-projection reconstructions (SPRs), is first investigated using simulated data. Of several reconstruction approaches examined, best results were obtained with algebraic reconstruction techniques (ART) when providing prior information about the reconstruction in the form of a starting volume. The results presented indicate that SPR-classification is sufficiently sensitive to classify assemblies with differences of only a few percent of the total mass. The usefulness of this procedure is illustrated by application to a heterogeneous cryo-electron microscopy dataset of adenovirus mutant dl313, lacking minor coat protein IX. These data were successfully divided into two distinct classes, in agreement with gel analysis and immuno-electron microscopy results. The classes yielded a wildtype-like reconstruction and a reconstruction representing the polypeptide IX-deficient dl313 virion. As the largest difference between these volumes is found at the location previously assigned to the external portion of minor coat protein polypeptide IIIa, questions arise concerning the current adenovirus model.

A snapshot of viral evolution from genome analysis of the tectiviridae family

The origin, evolution and relationships of viruses are all fascinating topics. Current thinking in these areas is strongly influenced by the tailed double-stranded (ds) DNA bacteriophages. These viruses have mosaic genomes produced by genetic exchange and so new natural isolates are quite dissimilar to each other, and to laboratory strains. Consequently, they are not amenable to study by current tools for phylogenetic analysis. Less attention has been paid to the Tectiviridae family, which embraces icosahedral dsDNA bacterial viruses with an internal lipid membrane. It includes viruses, such as PRD1, that infect Gram-negative bacteria, as well as viruses like Bam35 with Gram-positive hosts. Although PRD1 and Bam35 have closely related virion morphology and genome organization, they have no detectable sequence similarity. There is strong evidence that the Bam35 coat protein has the "double-barrel trimer" arrangement of PRD1 that was first observed in adenovirus and is predicted to occur in other viruses with large facets. It is very likely that a single ancestral virus gave rise to this very large group of viruses. The unprecedented degree of conservation recently observed for two Bam35-like tectiviruses made it important to investigate those infecting Gram-negative bacteria. The DNA sequences for six PRD1-like isolates (PRD1, PR3, PR4, PR5, L17, PR772) have now been determined. Remarkably, these bacteriophages, isolated at distinctly different dates and global locations, have almost identical genomes. The discovery of almost invariant genomes for the two main Tectiviridae groups contrasts sharply with the situation in the tailed dsDNA bacteriophages. Notably, it permits a sequence analysis of the isolates revealing that the tectiviral proteins can be dissected into a slowly evolving group descended from the ancestor, the viral self, and a more rapidly changing group reflecting interactions with the host.

The structure of the bacteriophage PRD1 spike sheds light on the evolution of viral capsid architecture

Comparisons of bacteriophage PRD1 and adenovirus protein structures and virion architectures have been instrumental in unraveling an evolutionary relationship and have led to a proposal of a phylogeny-based virus classification. The structure of the PRD1 spike protein P5 provides further insight into the evolution of viral proteins. The crystallized P5 fragment comprises two structural domains: a globular knob and a fibrous shaft. The head folds into a ten-stranded jelly roll beta barrel, which is structurally related to the tumor necrosis factor (TNF) and the PRD1 coat protein domains. The shaft domain is a structural counterpart to the adenovirus spike shaft. The structural relationships between PRD1, TNF, and adenovirus proteins suggest that the vertex proteins may have originated from an ancestral TNF-like jelly roll coat protein via a combination of gene duplication and deletion.

A quasi-atomic model of human adenovirus type 5 capsid

Adenoviruses infect a wide range of vertebrates including humans. Their icosahedral capsids are composed of three major proteins: the trimeric hexon forms the facets and the penton, a noncovalent complex of the pentameric penton base and trimeric fibre proteins, is located at the 12 capsid vertices. Several proteins (IIIa, VI, VIII and IX) stabilise the capsid. We have obtained a 10 A resolution map of the human adenovirus 5 by image analysis from cryo-electron micrographs (cryoEMs). This map, in combination with the X-ray structures of the penton base and hexon, was used to build a quasi-atomic model of the arrangement of the two major capsid components and to analyse the hexon-hexon and hexon-penton interactions. The secondary proteins, notably VIII, were located by comparing cryoEM maps of native and pIX deletion mutant virions. Minor proteins IX and IIIa are located on the outside of the capsid, whereas protein VIII is organised with a T=2 lattice on the inner face of the capsid. The capsid organisation is compared with the known X-ray structure of bacteriophage PRD1.

Does common architecture reveal a viral lineage spanning all three domains of life?

Our discovery that the major coat protein of bacteriophage PRD1 resembles that of human adenovirus raised the unexpected possibility that viruses infecting bacteria could be related by evolution to those infecting animal hosts. We first review the development of this idea. We then describe how we have used structure-based modeling to show that several other viruses with no detectable sequence similarity are likely to have coats constructed from similar proteins-the "double-barrel trimer." There is evidence that the group includes a diversity of viruses infecting very different hosts in all three domains of life: Eukarya; Bacteria; and Archaea that diverged billions of years ago. The current classification of viruses obscures such similarities. We propose that the occurrence of a double-barrel trimer coat protein in an icosahedral dsDNA virus with large facets, irrespective of its host, is a very strong indicator of its membership in a lineage of viruses with a common ancestor.

Membrane structure and interactions with protein and DNA in bacteriophage PRD1

Membranes are essential for selectively controlling the passage of molecules in and out of cells and mediating the response of cells to their environment. Biological membranes and their associated proteins present considerable difficulties for structural analysis. Although enveloped viruses have been imaged at about 9 A resolution by cryo-electron microscopy and image reconstruction, no detailed crystallographic structure of a membrane system has been described. The structure of the bacteriophage PRD1 particle, determined by X-ray crystallography at about 4 A resolution, allows the first detailed analysis of a membrane-containing virus. The architecture of the viral capsid and its implications for virus assembly are presented in the accompanying paper. Here we show that the electron density also reveals the icosahedral lipid bilayer, beneath the protein capsid, enveloping the viral DNA. The viral membrane contains about 26,000 lipid molecules asymmetrically distributed between the membrane leaflets. The inner leaflet is composed predominantly of zwitterionic phosphatidylethanolamine molecules, facilitating a very close interaction with the viral DNA, which we estimate to be packaged to a pressure of about 45 atm, factors that are likely to be important during membrane-mediated DNA translocation into the host cell. In contrast, the outer leaflet is enriched in phosphatidylglycerol and cardiolipin, which show a marked lateral segregation within the icosahedral asymmetric unit. In addition, the lipid headgroups show a surprising degree of order.

Insights into assembly from structural analysis of bacteriophage PRD1

The structure of the membrane-containing bacteriophage PRD1 has been determined by X-ray crystallography at about 4 A resolution. Here we describe the structure and location of proteins P3, P16, P30 and P31. Different structural proteins seem to have specialist roles in controlling virus assembly. The linearly extended P30 appears to nucleate the formation of the icosahedral facets (composed of trimers of the major capsid protein, P3) and acts as a molecular tape-measure, defining the size of the virus and cementing the facets together. Pentamers of P31 form the vertex base, interlocking with subunits of P3 and interacting with the membrane protein P16. The architectural similarities with adenovirus and one of the largest known virus particles PBCV-1 support the notion that the mechanism of assembly of PRD1 is scaleable and applies across the major viral lineage formed by these viruses.

Characterization of coliphage PR772 and evaluation of its use for virus filter performance testing

Virus filtration is a key clearance unit operation in the manufacture of recombinant protein, monoclonal antibody, and plasma-derived biopharmaceuticals. Recently, a consensus has developed among filter manufacturers and end users about the desirability of a common nomenclature and a standardized test for classifying and identifying virus-retentive filters. The Parenteral Drug Association virus filter task force has chosen PR772 as the model bacteriophage to standardize nomenclature for large-pore-size virus-retentive filters (filters designed to retain viruses larger than 50 to 60 nm in size). Previously, the coliphage PR772 (Tectiviridae family) has been used in some filtration studies as a surrogate for mammalian viruses of around 50 to 60 nm. In this report, we describe specific properties of PR772 critical to the support of its use for the standardization of virus filters. The complete genomic sequence of virulent phage PR772 was determined. Its genome contains 14,946 bp with an overall G+C content of 48.3 mol%, and 32 open reading frames of at least 40 codons. Comparison of the PR772 nucleotide sequence with the genome of Tectiviridae family prototype phage PRD1 revealed 97.2% identity at the DNA level. By dynamic light-scattering analysis, its hydrodynamic diameter was measured as 82 +/- 6 nm, consistent with use in testing large-virus-retentive filters. Finally, dynamic light-scattering analysis of PR772 preparations purified on CsCl gradients showed that the phage preparations are largely monodispersed. In summary, PR772 appears to be an appropriate model bacteriophage for standardization of nomenclature for larger-pore-size virus-retentive filters.

Integral membrane protein P16 of bacteriophage PRD1 stabilizes the adsorption vertex structure

The icosahedral membrane-containing double-stranded DNA bacteriophage PRD1 has a labile receptor binding spike complex at the vertices. This complex, which is analogous to that of adenovirus, is formed of the penton protein P31, the spike protein P5, and the receptor binding protein P2. Upon infection, the internal phage membrane transforms into a tubular structure that protrudes through a vertex and penetrates the cell envelope for DNA injection. We describe here a new class of PRD1 mutants lacking virion-associated integral membrane protein P16. P16 links the spike complex to the viral membrane and is necessary for spike stability. We also show that the unique vertex used for DNA packaging is intact in the P16-deficient particle, indicating that the 11 adsorption vertices and the 1 portal vertex are functionally and structurally distinct.

Phospholipid molecular species profiles of tectiviruses infecting Gram-negative and Gram-positive hosts

The phospholipid (PL) molecular species compositions of bacteriophages PRD1 and Bam35 as well as their respective hosts were determined quantitatively using liquid chromatography/electrospray ionization mass-spectrometry (LC-ESI-MS) and backed up by gas-chromatographic/mass-spectrometric (GC-MS) analysis of the total fatty acids (FAs). The results showed that both viruses contain significantly more phosphatidylglycerol (PG) and less phosphatidylethanolamine (PE) than the host membranes. Only modest differences in the molecular species composition of the viruses and their respective hosts were observed, indicating that the virus assembly process is relatively nonselective in respect of the fatty acid (FA) proportion of phospholipids (PL). These data indicate that the PL composition of these two viruses is largely, albeit not exclusively, determined by the availability of phospholipids in the host membrane.

The Bacillus thuringiensis linear double-stranded DNA phage Bam35, which is highly similar to the Bacillus cereus linear plasmid pBClin15, has a prophage state

Bam35, a 15-kbp double-stranded DNA phage, infects Bacillus thuringiensis. Recently, sequencing of the related Bacillus cereus revealed a 15.1-kbp linear plasmid, pBClin15. We show that pBClin15 closely resembles Bam35 and demonstrate conversion of Bam35 to a prophage. This state is common, as several B. thuringiensis strains release Bam35-related viruses.

Comparative analysis of bacterial viruses Bam35, infecting a gram-positive host, and PRD1, infecting gram-negative hosts, demonstrates a viral lineage

Extra- and intracellular viruses in the biosphere outnumber their cellular hosts by at least one order of magnitude. How is this enormous domain of viruses organized? Sampling of the virosphere has been scarce and focused on viruses infecting humans, cultivated plants, and animals as well as those infecting well-studied bacteria. It has been relatively easy to cluster closely related viruses based on their genome sequences. However, it has been impossible to establish long-range evolutionary relationships as sequence homology diminishes. Recent advances in the evaluation of virus architecture by high-resolution structural analysis and elucidation of viral functions have allowed new opportunities for establishment of possible long-range phylogenic relationships-virus lineages. Here, we use a genomic approach to investigate a proposed virus lineage formed by bacteriophage PRD1, infecting gram-negative bacteria, and human adenovirus. The new member of this proposed lineage, bacteriophage Bam35, is morphologically indistinguishable from PRD1. It infects gram-positive hosts that evolutionarily separated from gram-negative bacteria more than one billion years ago. For example, it can be inferred from structural analysis of the coat protein sequence that the fold is very similar to that of PRD1. This and other observations made here support the idea that a common early ancestor for Bam35, PRD1, and adenoviruses existed.

The tailless icosahedral membrane virus PRD1 localizes the proteins involved in genome packaging and injection at a unique vertex

The double-stranded DNA (dsDNA) virus PRD1 carries its genome in a membrane surrounded by an icosahedral protein shell. The shell contains 240 copies of the trimeric P3 protein arranged with a pseudo T = 25 triangulation that is reminiscent of the mammalian adenovirus. DNA packaging and infection are believed to occur through the vertices of the particle. We have used immunolabeling to define the distribution of proteins on the virion surface. Antibodies to protein P3 labeled the entire surface of the virus. Most of the 12 vertices labeled with antibodies directed against proteins P5, P2, and P31. These proteins are known to function in virus binding to the cell surface. Proteins P6, P11, and P20 were found on a single vertex per virion. The P6 and P20 proteins are believed to function in DNA packaging. Protein P11 is a pilot protein that is involved in a complex that mediates the early stages of DNA entry to the host cell. Labeling with antibodies to P5 or P2 did not affect the labeling of P6, the unique vertex protein. Labeling with antibodies to the unique vertex protein P6 interfered with the labeling by antibodies to the unique vertex protein P20. We conclude that PRD1 utilizes 11 of its vertices for initial receptor binding. It utilizes a single, unique vertex for both DNA packing during assembly and DNA delivery during infection.

Probing the ability of the coat and vertex protein of the membrane-containing bacteriophage PRD1 to display a meningococcal epitope

Bacteriophage PRD1 is an icosahedral dsDNA virus with a diameter of 740 A and an outer protein shell composed of 720 copies of major coat protein P3. Spike complexes at the vertices are composed of a pentameric base (protein P31) and a spike structure (proteins P5 and P2) where the N-terminal region of the trimeric P5 is associated with the base and the C-terminal region of P5 is associated with receptor-binding protein P2. The functionality of proteins P3 and P5 was investigated using insertions and deletions. It was observed that P3 did not tolerate changes whereas P5 tolerated changes much more freely. These properties support the hypothesis that viruses have core structures and functions, which remain stable over time, as well as other elements, responsible for host interactions, which are evolutionally more fluid. The insertional probe used was the apex of exposed loop 4 of group B meningococcal outer membrane protein PorA, a medically important subunit vaccine candidate. It was demonstrated that the epitope could be displayed on the virus surface as part of spike protein P5.

The unique vertex of bacterial virus PRD1 is connected to the viral internal membrane

Icosahedral double-stranded DNA (dsDNA) bacterial viruses are known to package their genomes into preformed procapsids via a unique portal vertex. Bacteriophage PRD1 differs from the more commonly known icosahedral dsDNA phages in that it contains an internal lipid membrane. The packaging of PRD1 is known to proceed via preformed empty capsids. Now, a unique vertex has been shown to exist in PRD1. We show in this study that this unique vertex extends to the virus internal membrane via two integral membrane proteins, P20 and P22. These small membrane proteins are necessary for the binding of the putative packaging ATPase P9, via another capsid protein, P6, to the virus particle.

Do viruses form lineages across different domains of life?

The scarce characterisation of the viral world has hampered our efforts to appreciate the magnitude and diversity of the viral domain. It appears that almost every species can be infected by a number of viruses. As our knowledge of viruses increases, it appears that this myriad of viruses may be organised into a reasonably low number of viral lineages including members infecting hosts belonging to different domains of life. Viruses belonging to a lineage share a common innate "self" that refers to structural and assembly principles of the virion. This hypothesis has a few consequences. All viruses are old, maybe preceding cellular life, and virus origins are polyphyletic, as opposed to the idea of a monophyletic origin of cellular life.

The receptor binding protein P2 of PRD1, a virus targeting antibiotic-resistant bacteria, has a novel fold suggesting multiple functions

Bacteriophage PRD1 is unusual, with an internal lipid membrane, but has striking resemblances to adenovirus that include receptor binding spikes. The PRD1 vertex complex contains P2, a 590 residue monomer that binds to receptors on antibiotic-resistant strains of E. coli and so is the functional counterpart to adenovirus fiber. P2 structures from two crystal forms, at 2.2 and 2.4 A resolution, reveal an elongated club-shaped molecule with a novel beta propeller "head" showing pseudo-6-fold symmetry. An extended loop with another novel fold forms a long "tail" containing a protruding proline-rich "fin." The head and fin structures are well suited to recognition and attachment, and the tail is likely to trigger the processes of vertex disassembly, membrane tube formation, and subsequent DNA injection.

Molecular Mechanisms In Bacteriophage T7 Procapsid Assembly, Maturation, And Dna Containment

Bacteriophage T7 is a double-stranded DNA bacteriophage that has attracted particular interest in studies of gene expression and regulation and of morphogenesis, as well as in biotechnological applications of expression vectors and phage display. We report here studies of T7 capsid assembly by cryoelectron microscopy and image analysis. T7 follows the canonical pathway of first forming a procapsid that converts into the mature capsid, but with some novel variations. The procapsid is a round particle with an icosahedral triangulation number of 7 levo, composed of regular pentamers and elongated hexamers. A singular vertex in the procapsid is occupied by the connector/portal protein, which forms 12-fold and 13-fold rings when overexpressed, of which the 12-mer appears to be the assembly-competent form. This vertex is the site of two symmetry mismatches: between the connector and the surrounding five gp 10 hexamers; and between the connector and the 8-fold cylindrical core mounted on its inner surface. The scaffolding protein, gp9, which is required for assembly, forms nubbin-like protrusions underlying the hexamers but not the pentamers, with no contacts between neighboring gp9 monomers. We propose that gp9 facilitates assembly by binding to gp10 hexamers, locking them into a morphogenically correct conformation. gp9 is expelled as the procapsid matures into the larger, thinner walled, polyhedral capsid. Several lines of evidence implicate the connector vertex as the site at which the maturation transformation is initiated: in vivo, maturation appears to be triggered by DNA packaging whereby the signal may involve interaction of the connector with DNA. In the mature T7 head, the DNA is organized as a tightly wound coaxial spool, with the DNA coiled around the core in at least four and perhaps as many as six concentric shells.