The structural basis for catalysis and specificity of the X-prolyl dipeptidyl aminopeptidase from Lactococcus lactis

Characterization, Semirational Design for pH Robustness, and the Application in Bioactive Peptide Production of a X-Prolyl Dipeptidyl Aminopeptidase from Lactococcus lactis MY-3

PepXLcMY-3, an X-prolyl dipeptidyl aminopeptidase derived from Lactobacillus lactis MY-3, was screened and recombinantly expressed in Escherichia coli. The enzyme could exhibit about 40% activity within the pH range of 6.0-10. To further improve the pH robustness, site E396 located in the active pocket was discovered through alanine scanning. The mutant E396I displayed both developed activity and kcat/Km. The optimal pH of E396I shifted from 6.0 to 10 compared to WT, with the relative activity within the pH range of 6.0-10 significantly increased. The site K648 was then proposed by semirational design. The activity of mutant E396I/K648D reached 4.03 U/mg. The optimal pH was restored to 6.0, and the pH stability was further improved. E396I/K648D could totally hydrolyze β-casomorphin 7 within 30 min. The hydrolysate showed 64.5% inhibition on angiotensin I converting enzyme, which was more efficient than those produced by E396I and WT, 23.2 and 44.7%, respectively.

Elucidating the Role of a Calcium-Binding Loop in an x-Prolyl Aminodipeptidase from Lb. helveticus

Prolyl aminodipeptidase (PepX) is an α/β hydrolase that cleaves at penultimate N-terminal prolyl peptide bonds. The crystal structure of PepX from Lactobacillus helveticus exhibits a calcium-binding loop within the catalytic domain. The calcium-binding sequence of xDxDxDGxxD within this loop is highly conserved in PepX proteins among lactic acid bacteria, but its purpose remains unknown. Enzyme activity is not significantly affected in the presence of the metal chelator ethylenediaminetetraacetic acid (EDTA), nor in the presence of excess calcium ions. To eliminate calcium binding, D196A and D194A/D196A mutations were constructed within the conserved calcium-binding sequence motif. Enzyme activity and stability of the D196A mutant were comparable to the wild-type enzyme by colorimetric kinetic assays and protein thermal shift assays. However, the D194A/D196A mutant was inactive though it retained native-like structure and thermal stability, contradicting the EDTA and calcium titration results. This suggests calcium binding to PepX may be essential for activity.

The acid-base-nucleophile catalytic triad in ABH-fold enzymes is coordinated by a set of structural elements

The alpha/beta-Hydrolases (ABH) are a structural class of proteins that are found widespread in nature and includes enzymes that can catalyze various reactions in different substrates. The catalytic versatility of the ABH fold enzymes, which has been a valuable property in protein engineering applications, is based on a similar acid-base-nucleophile catalytic mechanism. In our research, we are concerned with the structure that surrounds the key units of the catalytic machinery, and we have previously found conserved structural organizations that coordinate the catalytic acid, the catalytic nucleophile and the residues of the oxyanion hole. Here, we explore the architecture that surrounds the catalytic histidine at the active sites of enzymes from 40 ABH fold families, where we have identified six conserved interactions that coordinate the catalytic histidine next to the catalytic acid and the catalytic nucleophile. Specifically, the catalytic nucleophile is coordinated next to the catalytic histidine by two weak hydrogen bonds, while the catalytic acid is directly involved in the coordination of the catalytic histidine through by two weak hydrogen bonds. The imidazole ring of the catalytic histidine is coordinated by a CH-π contact and a hydrophobic interaction. Moreover, the catalytic triad residues are connected with a residue that is located at the core of the active site of ABH fold, which is suggested to be the fourth member of a “structural catalytic tetrad”. Besides their role in the stability of the catalytic mechanism, the conserved elements of the catalytic site are actively involved in ligand binding and affect other properties of the catalytic activity, such as substrate specificity, enantioselectivity, pH optimum and thermostability of ABH fold enzymes. These properties are regularly targeted in protein engineering applications, and thus, the identified conserved structural elements can serve as potential modification sites in order to develop ABH fold enzymes with altered activities.

Engineering Xaa-Pro dipeptidyl aminopeptidase for specific cleavage of glucagon and glucagon-like peptide 1 from fusion proteins

N-terminal extensions ("tags") have proven valuable for producing peptides using high throughput recombinant expression technologies. However, the applicability is hampered by the limited options for specific and efficient proteases to release the fully native sequence without additional amino acids in the N-terminal. Here we describe the Escherichia coli (E. coli) expression, purification and characterization of engineered variants of Xaa-Pro dipeptidyl aminopeptidase (Xaa-Pro-DAP) derived from Lactococcus lactis for cleavage of Gly-Pro dipeptide extension in the N-terminal of glucagon and glucagon-like peptide 1 (GLP-1(7-37)). By single amino acid substitution in the Xaa-Pro-DAP protease, significantly higher product yields were achieved. The combination of HRV14 3C protease and engineered Xaa-Pro-DAP is suggested for obtaining native N-terminal of peptides.

Structural characterization of a prolyl aminodipeptidase (PepX) from Lactobacillus helveticus

Prolyl aminodipeptidase (PepX) is an enzyme that hydrolyzes peptide bonds from the N-terminus of substrates when the penultimate amino-acid residue is a proline. Prolyl peptidases are of particular interest owing to their ability to hydrolyze food allergens that contain a high percentage of proline residues. PepX from Lactobacillus helveticus was cloned and expressed in Escherichia coli as an N-terminally His-tagged recombinant construct and was crystallized by hanging-drop vapor diffusion in a phosphate buffer using PEG 3350 as a precipitant. The structure was determined at 2.0 Å resolution by molecular replacement using the structure of PepX from Lactococcus lactis (PDB entry 1lns) as the starting model. Notable differences between the L. helveticus PepX structure and PDB entry 1lns include a cysteine instead of a phenylalanine at the substrate-binding site in the position which confers exopeptidase activity and the presence of a calcium ion coordinated by a calcium-binding motif with the consensus sequence DX(DN)XDG.

The X-prolyl dipeptidyl-peptidase PepX of Streptococcus thermophilus initially described as intracellular is also responsible for peptidase extracellular activity

This study addresses the hypothesis that the extracellular cell-associated X-prolyl dipeptidyl-peptidase activity initially described in Streptococcus thermophilus could be attributable to the intracellular X-prolyl dipeptidyl-peptidase PepX. For this purpose, a PepX-negative mutant of S. thermophilus LMD-9 was constructed by interrupting the pepX gene and named LMD-9-ΔpepX. When cultivated, the S. thermophilus LMD-9 wild type strain grew more rapidly than its ΔpepX mutant counterpart. Thus, the growth rate of the LMD-9-ΔpepX strain was reduced by a factor of 1.5 and 1.6 in milk and LM17 medium (M17 medium supplemented with 2% lactose), respectively. The negative effect of the PepX inactivation on the hydrolysis of β-casomorphin-7 was also observed. Indeed, when incubated with this peptide, the LMD-9-ΔpepX mutant cells were unable to hydrolyze it, whereas this peptide was completely degraded by the S. thermophilus LMD-9 wild type cells. This hydrolysis was not due to leakage of intracellular PepX, as no peptide hydrolysis was highlighted in cell-free filtrate of wild type strain. Therefore, based on these results, it can be presumed that though lacking an export signal, the intracellular PepX might have accessed the β-casomorphin-7 externally, perhaps via its galactose-binding domain-like fold, this domain being known to help enzymes bind to several proteins and substrates. Therefore, the identification of novel distinctive features of the proteolytic system of S. thermophilus will further enhance its credibility as a starter in milk fermentation.

Effect of high pressure on structural modifications and enzymatic activity of a purified X-prolyl dipeptidyl aminopeptidase from Streptococcus thermophilus

PepX aminopeptidase from Streptococcus thermophilus ACA DC 0022, used in Greek Feta cheese manufacturing, was purified. PepX comprises two subunits of equal molecular mass estimated, using SDS-PAGE and native-PAGE electrophoresis, to be 86 kDa. The effects of high pressure processing (100-450 MPa, combined with 20-40 °C) on purified PepX activity and structure were studied. Activation of the enzyme was observed after processing at 100-200 MPa and 20-30 °C. More intense processing conditions led to enzyme inactivation. PepX HP-induced conformational changes were also investigated through application of Circular Dichroism spectroscopy (CD). Pressures up to 200 MPa resulted in a structurally molten globule-like state where PepX maintained its secondary structure but the tertiary structure was substantially affected and enzyme activity increased. Both secondary and tertiary structures were affected severely by higher pressures (450 MPa), which reduced enzyme activity.

High-quality draft genome sequence of Aquidulcibacter paucihalophilus TH1-2T isolated from cyanobacterial aggregates in a eutrophic lake

Aquidulcibacter paucihalophilus TH1–2^T is a member of the family Caulobacteraceae within Alphaproteobacteria isolated from cyanobacterial aggregates in a eutrophic lake. The draft genome comprises 3,711,627 bp and 3489 predicted protein-coding genes. The genome of strain TH1–2^T has 270 genes encoding peptidases. And metallo and serine peptidases were found most frequently. A high number of genes encoding carbohydrate active enzymes (141 CAZymes) also present in strain TH1–2^T genome. Among CAZymes, 47 glycoside hydrolase families, 37 glycosyl transferase families, 38 carbohydrate esterases families, nine auxiliary activities families, seven carbohydrate-binding modules families, and three polysaccharide lyases families were identified. Accordingly, strain TH1–2^T has a high number of transporters (91), the dominated ones are ATP-binding cassette transporters (61) and TonB-dependent transporters (28). Major TBDTs are Group I, which consisted of transporters for various types of dissolved organic matter. These genome features indicate adaption to cyanobacterial aggregates microenvironments.

New aminopeptidase from "microbial dark matter" archaeon

Marine sediments host a large population of diverse, heterotrophic, uncultured microorganisms with unknown physiologies that control carbon flow through organic matter decomposition. Recently, single-cell genomics uncovered new key players in these processes, such as the miscellaneous crenarchaeotal group. These widespread archaea encode putative intra- and extracellular proteases for the degradation of detrital proteins present in sediments. Here, we show that one of these enzymes is a self-compartmentalizing tetrameric aminopeptidase with a preference for cysteine and hydrophobic residues at the N terminus of the hydrolyzed peptide. The ability to perform detailed characterizations of enzymes from native subsurface microorganisms, without requiring that those organisms first be grown in pure culture, holds great promise for understanding key carbon transformations in the environment as well as identifying new enzymes for biomedical and biotechnological applications.

The genome of the alga-associated marine flavobacterium Formosa agariphila KMM 3901T reveals a broad potential for degradation of algal polysaccharides

In recent years, representatives of the Bacteroidetes have been increasingly recognized as specialists for the degradation of macromolecules. Formosa constitutes a Bacteroidetes genus within the class Flavobacteria, and the members of this genus have been found in marine habitats with high levels of organic matter, such as in association with algae, invertebrates, and fecal pellets. Here we report on the generation and analysis of the genome of the type strain of Formosa agariphila (KMM 3901(T)), an isolate from the green alga Acrosiphonia sonderi. F. agariphila is a facultative anaerobe with the capacity for mixed acid fermentation and denitrification. Its genome harbors 129 proteases and 88 glycoside hydrolases, indicating a pronounced specialization for the degradation of proteins, polysaccharides, and glycoproteins. Sixty-five of the glycoside hydrolases are organized in at least 13 distinct polysaccharide utilization loci, where they are clustered with TonB-dependent receptors, SusD-like proteins, sensors/transcription factors, transporters, and often sulfatases. These loci play a pivotal role in bacteroidetal polysaccharide biodegradation and in the case of F. agariphila revealed the capacity to degrade a wide range of algal polysaccharides from green, red, and brown algae and thus a strong specialization of toward an alga-associated lifestyle. This was corroborated by growth experiments, which confirmed usage particularly of those monosaccharides that constitute the building blocks of abundant algal polysaccharides, as well as distinct algal polysaccharides, such as laminarins, xylans, and κ-carrageenans.

Induced-fit mechanism for prolyl endopeptidase

Prolyl peptidases cleave proteins at proline residues and are of importance for cancer, neurological function, and type II diabetes. Prolyl endopeptidase (PEP) cleaves neuropeptides and is a drug target for neuropsychiatric diseases such as post-traumatic stress disorder, depression, and schizophrenia. Previous structural analyses showing little differences between native and substrate-bound structures have suggested a lock-and-key catalytic mechanism. We now directly demonstrate from seven structures of Aeromonus punctata PEP that the mechanism is instead induced fit: the native enzyme exists in a conformationally flexible opened state with a large interdomain opening between the beta-propeller and alpha/beta-hydrolase domains; addition of substrate to preformed native crystals induces a large scale conformational change into a closed state with induced-fit adjustments of the active site, and inhibition of this conformational change prevents substrate binding. Absolute sequence conservation among 28 orthologs of residues at the active site and critical residues at the interdomain interface indicates that this mechanism is conserved in all PEPs. This finding has immediate implications for the use of conformationally targeted drug design to improve specificity of inhibition against this family of proline-specific serine proteases.

The MEROPS batch BLAST: a tool to detect peptidases and their non-peptidase homologues in a genome

Many of the 181 families of peptidases contain homologues that are known to have functions other than peptide bond hydrolysis. Distinguishing an active peptidase from a homologue that is not a peptidase requires specialist knowledge of the important active site residues, because replacement or lack of one of these catalytic residues is an important clue that the homologue in question is unlikely to hydrolyse peptide bonds. Now that the rate at which proteins are characterized is outstripped by the rate that genome sequences are determined, many genes are being incorrectly annotated because only sequence similarity is taken into consideration. We present a tool called the MEROPS batch BLAST which not only performs a comparison against the MEROPS sequence collection, but also does a pair-wise alignment with the closest homologue detected and calculates the position of the active site residues. A non-peptidase homologue can be distinguished by the absence or unacceptable replacement of any of these residues. An analysis of peptidase homologues in the genome of the bacterium Erythrobacter litoralis is presented as an example.

Unusual phyletic distribution of peptidases as a tool for identifying potential drug targets

Eukaryote homologues of carboxypeptidases Taq have been discovered by Niemirowicz et al. in the protozoan Trypanosoma cruzi, the causative agent of Chagas' disease. This is surprising, because the peptidase family was thought to be restricted to bacteria and archaea. In this issue of the Biochemical Journal, the authors propose that the Trypanosoma carboxypeptidases are potential drug targets for treatment of the disease. The authors also propose that the presence of the genes in the zooflagellates can be explained by a horizontal transfer of an ancestral gene from a prokaryote. Because peptidases are popular drug targets, identifying parasite or pathogen peptidases that have no homologues in their hosts would be a method to select the most promising targets. To understand how unusual this phyletic distribution is among the 183 families of peptidases, several other examples of horizontal transfers are presented, as well as some unusual losses of peptidase genes.

J1 acylase, a glutaryl-7-aminocephalosporanic acid acylase from Bacillus laterosporus J1, is a member of the alpha/beta-hydrolase fold superfamily

J1 acylase, a glutaryl-7-aminocephalosporanic acid acylase (GCA) isolated from Bacillus laterosporus J1, has been conventionally grouped as the only member of class V GCA, although its amino acid sequence shares less than 10% identity with members of other classes of GCA. Instead, it shows higher sequence similarities with Rhodococcus sp. strain MB1 cocaine esterase (RhCocE) and Acetobacter turbidans alpha-amino acid ester hydrolase (AtAEH), members of the alpha/beta-hydrolase fold superfamily. Homology modeling and secondary structure prediction indicate that the N-terminal region of J1 acylase has an alpha/beta-hydrolase folding pattern. The catalytic triads in RhCocE and AtAEH were identified in J1 acylase as S125, D264 and H309. Mutations to alanine at these positions were found to completely inactivate the enzyme. These results suggest that J1 acylase is a member of the alpha/beta-hydrolase fold superfamily with a serine-histidine-aspartate catalytic triad.

Acetobacter turbidans alpha-amino acid ester hydrolase: how a single mutation improves an antibiotic-producing enzyme

The alpha-amino acid ester hydrolase (AEH) from Acetobacter turbidans is a bacterial enzyme catalyzing the hydrolysis and synthesis of beta-lactam antibiotics. The crystal structures of the native enzyme, both unliganded and in complex with the hydrolysis product D-phenylglycine are reported, as well as the structures of an inactive mutant (S205A) complexed with the substrate ampicillin, and an active site mutant (Y206A) with an increased tendency to catalyze antibiotic production rather than hydrolysis. The structure of the native enzyme shows an acyl binding pocket, in which D-phenylglycine binds, and an additional space that is large enough to accommodate the beta-lactam moiety of an antibiotic. In the S205A mutant, ampicillin binds in this pocket in a non-productive manner, making extensive contacts with the side chain of Tyr(112), which also participates in oxyanion hole formation. In the Y206A mutant, the Tyr(112) side chain has moved with its hydroxyl group toward the catalytic serine. Because this changes the properties of the beta-lactam binding site, this could explain the increased beta-lactam transferase activity of this mutant.

The structural comparison of the bacterial PepX and human DPP-IV reveals sites for the design of inhibitors of PepX activity

X-prolyl dipeptidyl aminopeptidases (X-PDAP) are enzymes catalysing the release of dipeptides from the amino termini of polypeptides containing a proline or an alanine at the penultimate position. Involved in various mammalian regulation processes, as well as in chronic human diseases, they have been proposed to play a role in pathogenicity for Streptococci. We compared the structure of X-PDAP from Lactococcus lactis (PepX) with its human counterpart DPP-IV. Despite very different overall folds, the residues most implicated for X-PDAP activity are conserved in the same positions and orientations in both enzymes, thus defining a structural signature for the X-PDAP specificity that crosses the species frontiers of evolution. Starting from this observation, we tested some inhibitors of DPP-IV on PepX activity, for which no specific inhibitor is known. We thus found that PepX was highly sensitive to valine-pyrrolidide with a KI of 9.3 microm, close to that reported in DPP-IV inhibition. We finally used the structure of PepX from L. lactis as a template for computer-based homology modeling of PepX from the pathogenic Streptococcus gordonii. Docking simulations of valine-pyrrolidide into the active site of PepX led to the identification of key residues for a rational drug design against PepX from Streptococci. These results could have applications in human health giving new perspectives to the struggle against pathogens.

Multifunctional xylooligosaccharide/cephalosporin C deacetylase revealed by the hexameric structure of the Bacillus subtilis enzyme at 1.9A resolution

Esterases and deacetylases active on carbohydrate ligands have been classified into 14 families based upon amino acid sequence similarities. Enzymes from carbohydrate esterase family seven (CE-7) are unusual in that they display activity towards both acetylated xylooligosaccharides and the antibiotic, cephalosporin C. The 1.9A structure of the multifunctional CE-7 esterase (hereinafter CAH) from Bacillus subtilis 168 reveals a classical alpha/beta hydrolase fold encased within a 32 hexamer. This is the first example of a hexameric alpha/beta hydrolase and is further evidence of the versatility of this particular fold, which is used in a wide variety of biological contexts. A narrow entrance tunnel leads to the centre of the molecule, where the six active-centre catalytic triads point towards the tunnel interior and thus are sequestered away from cytoplasmic contents. By analogy to self-compartmentalising proteases, the tunnel entrance may function to hinder access of large substrates to the poly-specific active centre. This would explain the observation that the enzyme is active on a variety of small, acetylated molecules. The structure of an active site mutant in complex with the reaction product, acetate, reveals details of the putative oxyanion binding site, and suggests that substrates bind predominantly through non-specific contacts with protein hydrophobic residues. Protein residues involved in catalysis are tethered by interactions with protein excursions from the canonical alpha/beta hydrolase fold. These excursions also mediate quaternary structure maintenance, so it would appear that catalytic competence is only achieved on protein multimerisation. We suggest that the acetyl xylan esterase (EC 3.1.1.72) and cephalosporin C deacetylase (EC 3.1.1.41) enzymes of the CE-7 family represent a single class of proteins with a multifunctional deacetylase activity against a range of small substrates.

The sequence and crystal structure of the alpha-amino acid ester hydrolase from Xanthomonas citri define a new family of beta-lactam antibiotic acylases

alpha-Amino acid ester hydrolases (AEHs) catalyze the hydrolysis and synthesis of esters and amides with an alpha-amino group. As such, they can synthesize beta-lactam antibiotics from acyl compounds and beta-lactam nuclei obtained from the hydrolysis of natural antibiotics. This article describes the gene sequence and the 1.9-A resolution crystal structure of the AEH from Xanthomonas citri. The enzyme consists of an alpha/beta-hydrolase fold domain, a helical cap domain, and a jellyroll beta-domain. Structural homology was observed to the Rhodococcus cocaine esterase, indicating that both enzymes belong to the same class of bacterial hydrolases. Docking of a beta-lactam antibiotic in the active site explains the substrate specificity, specifically the necessity of an alpha-amino group on the substrate, and explains the low specificity toward the beta-lactam nucleus.