Processivity of DNA polymerases: two mechanisms, one goal

Quick and easy method for extraction and purification of Pfu-Sso7d, a high processivity DNA polymerase

The polymerase chain reaction is an extensively used technique with numerous applications in the field of biological sciences. In addition to naturally occurring DNA polymerases with varying processivity and fidelity, genetically engineered recombinant DNA polymerases are also used in PCR. The Pfu-Sso7d, a fusion DNA polymerase, is obtained by the fusion of Sso7d, a small DNA binding protein, to the polymerase domain of the Pfu DNA polymerase. Pfu-Sso7d is known for its high processivity, efficiency, and fidelity. Expensive commercial variants of Pfu-Sso7d are sold under various trade names. Here, we report a quick, cost and time-efficient purification protocol and an optimized buffer system for Pfu-Sso7d. We evaluated precipitation efficiencies of varying concentrations of ethanol and acetone and compared the activities of the precipitated enzyme. Although both the solvents efficiently precipitated Pfu-Sso7d, acetone showed better precipitation efficiency. Purified Pfu-Sso7d showed excellent activities in the PCR of templates with varying lengths and GC contents. We also report a buffer system that works with Pfu-Sso7d as efficiently as commercially available buffers. This quick and efficient purification scheme and buffer system will provide researchers cost-efficient access to fusion polymerases.

Alternative RNA degradation pathways by the exonuclease Pop2p from Saccharomyces cerevisiae

The 3' to 5' exonuclease Pop2p (Caf1p) is part of the CCR4-NOT deadenylation complex that removes poly(A) tails from mRNAs in cells. Pop2p is structurally conserved in eukaryotes, but Saccharomyces cerevisiae Pop2p harbors noncanonical amino acids in its catalytic center. The enzymatic properties of S. cerevisiae Pop2p are not well defined. Here we characterize the RNA exonuclease activity of recombinant S. cerevisiae Pop2p. We find that S. cerevisiae Pop2p degrades RNAs via two alternative reactions pathways, one generating nucleotides with 5'-phosphates and RNA intermediates with 3'-hydroxyls, and the other generating nucleotides with 3'-phosphates and RNA intermediates with 3'-phosphates. The enzyme is not able to initiate the reaction on RNAs with a 3'-phosphate, which leads to accumulation of RNAs with 3'-phosphates that can exceed 10 nt and are resistant to further degradation by S. cerevisiae Pop2p. We further demonstrate that S. cerevisiae Pop2p degrades RNAs in three reaction phases: an initial distributive phase, a second processive phase and a third phase during which processivity gradually declines. We also show that mutations of subsets of amino acids in the catalytic center, including those previously thought to inactivate the enzyme, moderately reduce, but not eliminate activity. Only mutation of all five amino acids in the catalytic center diminishes activity of Pop2p to background levels. Collectively, our results reveal robust exonuclease activity of S. cerevisiae Pop2p with unusual enzymatic properties, characterized by alternative degradation pathways, multiple reaction phases and functional redundancy of amino acids in the catalytic core.

Plant Organellar DNA Polymerases Evolved Multifunctionality through the Acquisition of Novel Amino Acid Insertions

The majority of DNA polymerases (DNAPs) are specialized enzymes with specific roles in DNA replication, translesion DNA synthesis (TLS), or DNA repair. The enzymatic characteristics to perform accurate DNA replication are in apparent contradiction with TLS or DNA repair abilities. For instance, replicative DNAPs incorporate nucleotides with high fidelity and processivity, whereas TLS DNAPs are low-fidelity polymerases with distributive nucleotide incorporation. Plant organelles (mitochondria and chloroplast) are replicated by family-A DNA polymerases that are both replicative and TLS DNAPs. Furthermore, plant organellar DNA polymerases from the plant model Arabidopsis thaliana (AtPOLIs) execute repair of double-stranded breaks by microhomology-mediated end-joining and perform Base Excision Repair (BER) using lyase and strand-displacement activities. AtPOLIs harbor three unique insertions in their polymerization domain that are associated with TLS, microhomology-mediated end-joining (MMEJ), strand-displacement, and lyase activities. We postulate that AtPOLIs are able to execute those different functions through the acquisition of these novel amino acid insertions, making them multifunctional enzymes able to participate in DNA replication and DNA repair.

Two Approaches to Enhance the Processivity and Salt Tolerance of Staphylococcus aureus DNA Polymerase

In this article, two engineering-strategies were carried out to enhance the processivity of the DNA polymerase used in recombinase polymerase amplification (RPA). We demonstrate that covalent linkage of a non-specific, double-stranded DNA binding protein, Sso7d, to the large fragment of Staphylococcus aureus Pol I (Sau) caused a moderate enhancement of processivity and a significant improvement in the salt tolerance of Sau. Meanwhile, we provide evidence suggesting that insertion of the thioredoxin-binding domain from bacteriophage T7 DNA polymerase into the analogous position of the large fragment of Sau dramatically enhanced the processivity and mildly increased the salt tolerance of Sau when a host DNA binding protein, thioredoxin, was annexed. Both of these two strategies did not improve the amplifying performance of Sau in RPA, indicating that optimum processivity is crucial for amplifying efficiency.

Biochemistry and regulation of the protein arginine methyltransferases (PRMTs)

Many key cellular processes can be regulated by the seemingly simple addition of one, or two, methyl groups to arginine residues by the nine known mammalian protein arginine methyltransferases (PRMTs). The impact that arginine methylation has on cellular well-being is highlighted by the ever growing evidence linking PRMT dysregulation to disease states, which has marked the PRMTs as prominent pharmacological targets. This review is meant to orient the reader with respect to the structural features of the PRMTs that account for catalytic activity, as well as provide a framework for understanding how these enzymes are regulated. An overview of what we understand about substrate recognition and binding is provided. Control of product specificity and enzyme processivity are introduced as necessary but flexible features of the PRMTs. Precise control of PRMT activity is a critical component to eukaryotic cell health, especially given that an arginine demethylase has not been identified. We therefore conclude the review with a comprehensive discussion of how protein arginine methylation is regulated.

Thioredoxin, the processivity factor, sequesters an exposed cysteine in the thumb domain of bacteriophage T7 DNA polymerase

Gene 5 protein (gp5) of bacteriophage T7 is a non-processive DNA polymerase. It achieves processivity by binding to Escherichia coli thioredoxin (trx). gp5/trx complex binds tightly to a primer-DNA template enabling the polymerization of hundreds of nucleotides per binding event. gp5 contains 10 cysteines. Under non-reducing condition, exposed cysteines form intermolecular disulfide linkages resulting in the loss of polymerase activity. No disulfide linkage is detected when Cys-275 and Cys-313 are replaced with serines. Cys-275 and Cys-313 are located on loop A and loop B of the thioredoxin binding domain, respectively. Replacement of either cysteine with serine (gp5-C275S, gp5-C313S) drastically decreases polymerase activity of gp5 on dA(350)/dT(25). On this primer-template gp5/trx in which Cys-313 or Cys-275 is replaced with serine have 50 and 90%, respectively, of the polymerase activity observed with wild-type gp5/trx. With single-stranded M13 DNA as a template gp5-C275S/trx retains 60% of the polymerase activity of wild-type gp5/trx. In contrast, gp5-C313S/trx has only one-tenth of the polymerase activity of wild-type gp5/trx on M13 DNA. Both wild-type gp5/trx and gp5-C275S/trx catalyze the synthesis of the entire complementary strand of M13 DNA, whereas gp5-C313S/trx has difficulty in synthesizing DNA through sites of secondary structure. gp5-C313S fails to form a functional complex with trx as measured by the apparent binding affinity as well as by the lack of a physical interaction with thioredoxin during hydroxyapatite-phosphate chromatography. Small angle x-ray scattering reveals an elongated conformation of gp5-C313S in comparison to a compact and spherical conformation of wild-type gp5.

Spectroscopic analysis of polymerization and exonuclease proofreading by a high-fidelity DNA polymerase during translesion DNA synthesis

High fidelity DNA polymerases maintain genomic fidelity through a series of kinetic steps that include nucleotide binding, conformational changes, phosphoryl transfer, polymerase translocation, and nucleotide excision. Developing a comprehensive understanding of how these steps are coordinated during correct and pro-mutagenic DNA synthesis has been hindered due to lack of spectroscopic nucleotides that function as efficient polymerase substrates. This report describes the application of a non-natural nucleotide designated 5-naphthyl-indole-2'-deoxyribose triphosphate which behaves as a fluorogenic substrate to monitor nucleotide incorporation and excision during the replication of normal DNA versus two distinct DNA lesions (cyclobutane thymine dimer and an abasic site). Transient fluorescence and rapid-chemical quench experiments demonstrate that the rate constants for nucleotide incorporation vary as a function of DNA lesion. These differences indicate that the non-natural nucleotide can function as a spectroscopic probe to distinguish between normal versus translesion DNA synthesis. Studies using wild-type DNA polymerase reveal the presence of a fluorescence recovery phase that corresponds to the formation of a pre-excision complex that precedes hydrolytic excision of the non-natural nucleotide. Rate constants for the formation of this pre-excision complex are dependent upon the DNA lesion, and this suggests that the mechanism of exonuclease proofreading is regulated by the nature of the formed mispair. Finally, spectroscopic evidence confirms that exonuclease proofreading competes with polymerase translocation. Collectively, this work provides the first demonstration for a non-natural nucleotide that functions as a spectroscopic probe to study the coordinated efforts of polymerization and exonuclease proofreading during correct and translesion DNA synthesis.

Phosphorylation mechanism and structure of serine-arginine protein kinases

The splicing of mRNA requires a group of essential factors known as SR proteins, which participate in the maturation of the spliceosome. These proteins contain one or two RNA recognition motifs and a C-terminal domain rich in Arg-Ser repeats (RS domain). SR proteins are phosphorylated at numerous serines in the RS domain by the SR-specific protein kinase (SRPK) family of protein kinases. RS domain phosphorylation is necessary for entry of SR proteins into the nucleus, and may also play important roles in alternative splicing, mRNA export, and other processing events. Although SR proteins are polyphosphorylated in vivo, the mechanism underlying this complex reaction has only been recently elucidated. Human alternative splicing factor [serine/arginine-rich splicing factor 1 (SRSF1)], a prototype for the SR protein family, is regiospecifically phosphorylated by SRPK1, a post-translational modification that controls cytoplasmic-nuclear localization. SRPK1 binds SRSF1 with unusually high affinity, and rapidly modifies about 10-12 serines in the N-terminal region of the RS domain (RS1), using a mechanism that incorporates sequential, C-terminal to N-terminal phosphorylation and several processive steps. SRPK1 employs a highly dynamic feeding mechanism for RS domain phosphorylation in which the N-terminal portion of RS1 is initially bound to a docking groove in the large lobe of the kinase domain. Upon subsequent rounds of phosphorylation, this N-terminal segment translocates into the active site, and a β-strand in RNA recognition motif 2 unfolds and occupies the docking groove. These studies indicate that efficient regiospecific phosphorylation of SRSF1 is the result of a contoured binding cavity in SRPK1, a lengthy Arg-Ser repetitive segment in the RS domain, and a highly directional processing mechanism.

Yeast mitochondrial DNA polymerase is a highly processive single-subunit enzyme

Polymerase γ is solely responsible for fast and faithful replication of the mitochondrial genome. High processivity of the polymerase γ is often achieved by association of the catalytic subunit with accessory factors that enhance its catalytic activity and/or DNA binding. Here we characterize the intrinsic catalytic activity and processivity of the recombinant catalytic subunit of yeast polymerase γ, the Mip1 protein. We demonstrate that Mip1 can efficiently synthesize DNA stretches of up to several thousand nucleotides without dissociation from the template. Furthermore, we show that Mip1 can perform DNA synthesis on double-stranded templates utilizing a strand displacement mechanism. Our observations confirm that in contrast to its homologues in other organisms, Mip1 can function as a single-subunit replicative polymerase.

Streamlined, automated protocols for the production of milligram quantities of untagged recombinant human cyclophilin-A (hCypA) and untagged human proliferating cell nuclear antigen (hPCNA) using AKTAxpress

We developed streamlined, automated purification protocols for the production of milligram quantities of untagged recombinant human cyclophilin-A (hCypA) and untagged human proliferating cell nuclear antigen (hPCNA) from Escherichia coli, using the AKTAxpress chromatography system. The automated 2-step (cation exchange and size exclusion) purification protocol for untagged hCypA results in final purity and yields of 93% and approximately 5 mg L(-1) of original cell culture, respectively, in under 12h, including all primary sample processing and column equilibration steps. The novel automated 4-step (anion exchange, desalt, heparin-affinity and size exclusion, in linear sequence) purification protocol for untagged hPCNA results in final purity and yields of 87% and approximately 4 mg L(-1) of original cell culture, respectively, in under 24h, including all primary sample processing and column equilibration steps. This saves in excess of four full working days when compared to the traditional protocol, producing protein with similar final yield, purity and activity. Furthermore, it limits a time-dependent protein aggregation, a problem with the traditional protocol that results in a loss of final yield. Both automated protocols were developed to use generic commercially available pre-packed columns and automatically prepared minimal buffers, designed to eliminate user and system variations, maximize run reproducibility, standardize yield and purity between batches, increase throughput and reduce user input to a minimum. Both protocols represent robust generic methods for the automated production of untagged hCypA and hPCNA.

Interactions of Escherichia coli thioredoxin, the processivity factor, with bacteriophage T7 DNA polymerase and helicase

Escherichia coli thioredoxin binds to a unique flexible loop of 71 amino acid residues, designated the thioredoxin binding domain (TBD), located in the thumb subdomain of bacteriophage T7 gene 5 DNA polymerase. The initial designation of thioredoxin as a processivity factor was premature. Rather it remodels the TBD for interaction with DNA and the other replication proteins. The binding of thioredoxin exposes a number of basic residues on the TBD that lie over the duplex region of the primer-template and increases the processivity of nucleotide polymerization. Two small solvent-exposed loops (loops A and B) located within TBD electrostatically interact with the acidic C-terminal tail of T7 gene 4 helicase-primase, an interaction that is enhanced by the binding of thioredoxin. Several basic residues on the surface of thioredoxin in the polymerase-thioredoxin complex lie in close proximity to the TBD. One of these residues, lysine 36, is located proximal to loop A. The substitution of glutamate for lysine has a dramatic effect on the binding of gene 4 helicase to a DNA polymerase-thioredoxin complex lacking charges on loop B; binding is decreased 15-fold relative to that observed with wild-type thioredoxin. This defective interaction impairs the ability of T7 DNA polymerase-thioredoxin together with T7 helicase to mediate strand displacement synthesis. This is the first demonstration that thioredoxin interacts with replication proteins other than T7 DNA polymerase.

Partial strands synthesizing leads to inevitable aborting and complicated products in consecutive polymerase chain reactions (PCRs)

Various abnormal phenomena have been observed during PCR so far. The present study performed a series of consecutive PCRs (including many rounds of re-amplification continuously) and found that the abortion of re-amplification was inevitable as long as a variety of complicated product appeared. The aborting stages varied, according to the lengths of targets. Longer targets reached the abortion earlier than the shorter ones, marked by appearance of the complex that was immobile in electrophoresis. Denatured gel-electrophoresis revealed that the complex was mainly made up of shorter or partially synthesized strands, together with small amounts of full-length ones. Able to be digested by S1 nuclease but unable by restriction endonucleases (REs), the complex was proved to consist of both single regions and double-helix regions that kept the complex stable thermodynamically. Simulations gave evidence that partial strands, even at lower concentration, could disturb re-amplification effectively and lead to the abortion of re-amplifications finally. It was pointed out that the partial strands formed chiefly via polymerase's infidelity, and hence the solution to lighten the abnormality was also proposed.

Mutation of Phe102 to Ser in the carboxyl terminal helix of Escherichia coli thioredoxin affects the stability and processivity of T7 DNA polymerase

Processivity of T7 DNA polymerase relies on the coupling of its cofactor Escherichia coli thioredoxin (Trx) to gene 5 protein (gp5) at 1:1 stoichiometry. We designed a coexpression system for gp5 and Trx that allows in vivo reconstitution of subunits into a functional enzyme. The properties of this enzyme were compared with the activity of commercial T7 DNA polymerase. Examination of purified enzymes by sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that the thioredoxin subunit of the two enzymes did not comigrate. To our surprise, we identified a mutation (Phe102 to Ser) in the Trx component from the commercial T7 DNA polymerase (gp5/TrxS102) that was not in the enzyme from the coexpression system (wild type gp5/Trx). A comparison of polymerase activity of the T7 DNA polymerases shows that both enzymes possessed similar specific activity but they were different in their residual activity at 37 degrees C. The half-life of gp5/TrxS102 was 7 min at 37 degrees C and 12 min for gp5/Trx. gp5/TrxS102 polymerase activity was reduced by fourfold with 3'-5' exonuclease activity as the prominent activity detected after 10 min of heat inactivation at 37 degrees C. Supplementation of reaction mixtures containing gp5/TrxS102 with exogenous nonmutant thioredoxin restored the enzyme activity levels. Pulse proteolysis was used to demonstrate that TrxS102 unfolded at lower urea concentrations than wild type thioredoxin. Thus, Ser substitution at position 102 affected the structural stability of thioredoxin resulting in a reduced binding affinity for gp5 and loss of processivity.

Vaccinia virus uracil DNA glycosylase interacts with the A20 protein to form a heterodimeric processivity factor for the viral DNA polymerase

The vaccinia virus E9 protein, the catalytic subunit of the DNA polymerase holoenzyme, is inherently distributive under physiological conditions, although infected cells contain a highly processive form of the enzyme. The viral A20 protein was previously characterized as a stoichiometric component of the processivity factor, and an interaction between A20 and E9 was documented in vivo. A20 has been shown to interact with D4, the virally encoded uracil DNA glycosylase (UDG), by yeast-two hybrid and in vitro analysis. Here we confirm that UDG and A20 interact in vivo and show that temperature-sensitive viruses with lesions in the D4R gene show a profound defect in DNA synthesis at the non-permissive temperature. Moreover, cytoplasmic extracts prepared from these infections lack processive polymerase activity in vitro, implicating D4 in the assembly or activity of the processive polymerase. Upon overexpression of 3xFLAG-UDG, A20, and E9 in various combinations, we purified dimeric and trimeric UDG-A20 and UDG-A20-polymerase complexes, respectively. These complexes are stable in 750 mm NaCl and can be further purified by Mono Q chromatography. Notably, the trimeric complex displays robust processive polymerase activity, and the dimeric complex can confer processivity on purified E9. Consistent with previous reports that the catalytic activity of UDG is dispensable for virus replication in tissue culture, we find that the role of UDG role in the polymerase complex is not diminished by mutations targeting residues involved in uracil recognition or excision. Our cumulative data support the conclusion that A20 and UDG form a heterodimeric processivity factor that associates with E9 to comprise the processive polymerase holoenzyme.

Coexpression of the subunits of T7 DNA polymerase from an artificial operon allows one-step purification of active gp5/Trx complex

T7 DNA polymerase expression was performed from an artificial operon by cloning its cofactor, thioredoxin, downstream of a N-terminal 9xHis-tagged T7 gene 5 (gp5). Up to 90% of gp5 was soluble in the presence, but not in the absence of thioredoxin coexpression suggesting that free-form thioredoxin assisted solubilization of gp5. Expression and single-step nickel-agarose affinity purification resulted in recovery of an enzyme that was 97% pure. Copurification of thioredoxin was observed and the estimated molar ratio of thioredoxin to gp5 was 1:1 in the purified DNA polymerase complex. Purified T7 DNA polymerase exhibited full polymerase activity compared to the commercial enzyme and required no exogenous thioredoxin for activity.

The highly processive DNA polymerase of bacteriophage T5. Role of the unique N and C termini

The DNA polymerase encoded by bacteriophage T5 has been reported previously to be processive and to catalyze extensive strand displacement synthesis. The enzyme, purified from phage-infected cells, did not require accessory proteins for these activities. Although T5 DNA polymerase shares extensive sequence homology with Escherichia coli DNA polymerase I and T7 DNA polymerase, it contains unique regions of 130 and 71 residues at its N and C termini, respectively. We cloned the gene encoding wild-type T5 DNA polymerase and characterized the overproduced protein. We also examined the effect of N- and C-terminal deletions on processivity and strand displacement synthesis. T5 DNA polymerase lacking its N-terminal 30 residues resembled the wild-type enzyme albeit with a 2-fold reduction in polymerase activity. Deletion of 24 residues at the C terminus resulted in a 30-fold reduction in polymerase activity on primed circular DNA, had dramatically reduced processivity, and was unable to carry out strand displacement synthesis. Deletion of 63 residues at the C terminus resulted in a 20,000-fold reduction in polymerase activity. The 3' to 5' double-stranded DNA exonuclease activity associated with T5 DNA polymerase was reduced by a factor of 5 in the polymerase truncated at the N terminus but was stimulated by a factor of 7 in the polymerase truncated at the C terminus. We propose a model in which the C terminus increases the affinity of the DNA for the polymerase active site, thus increasing processivity and decreasing the accessibility of the DNA to the exonuclease active site.

A novel strategy to engineer DNA polymerases for enhanced processivity and improved performance in vitro

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalized to others. Here we report a protein engineering-based approach to significantly improve the processivity of DNA polymerases by covalently linking the polymerase domain to a sequence non-specific dsDNA binding protein. Using Sso7d from Sulfolobus solfataricus as the DNA binding protein, we demonstrate that the processivity of both family A and family B polymerases can be significantly enhanced. By introducing point mutations in Sso7d, we show that the dsDNA binding property of Sso7d is essential for the enhancement. We present evidence supporting two novel conclusions. First, the fusion of a heterologous dsDNA binding protein to a polymerase can increase processivity without compromising catalytic activity and enzyme stability. Second, polymerase processivity is limiting for the efficiency of PCR, such that the fusion enzymes exhibit profound advantages over unmodified enzymes in PCR applications. This technology has the potential to broadly improve the performance of nucleic acid modifying enzymes.

A covalent linkage between the gene 5 DNA polymerase of bacteriophage T7 and Escherichia coli thioredoxin, the processivity factor: fate of thioredoxin during DNA synthesis

Gene 5 protein (gp5) of bacteriophage T7 is a non-processive DNA polymerase, which acquires high processivity by binding to Escherichia coli thioredoxin. The gene 5 protein-thioredoxin complex (gp5/trx) polymerizes thousands of nucleotides before dissociating from a primer-template. We have engineered a disulfide linkage between the gene 5 protein and thioredoxin within the binding surface of the two proteins. The polymerase activity of the covalently linked complex (gp5-S-S-trx) is similar to that of gp5/trx on poly(dA)/oligo(dT). However, gp5-S-S-trx has only one third the polymerase activity of gp5/trx on single-stranded M13 DNA. gp5-S-S-trx has difficulty polymerizing nucleotides through sites of secondary structure on M13 DNA and stalls at these sites, resulting in lower processivity. However, gp5-S-S-trx has an identical processivity and rate of elongation when E. coli single-stranded DNA-binding protein (SSB protein) is used to remove secondary structure from M13 DNA. Upon completing synthesis on a DNA template lacking secondary structure, both complexes recycle intact, without dissociation of the processivity factor, to initiate synthesis on a new DNA template. However, a complex stalled at secondary structure becomes unstable, and both subunits dissociate from each other as the polymerase prematurely releases from M13 DNA.

In search of an RNA replicase ribozyme

The theory that an RNA world played a pivotal role in life's evolutionary past has prompted investigations into the scope of RNA catalysis. These efforts have attempted to demonstrate the plausibility of an RNA-based genetic system, which would require RNA molecules that catalyze their own replication. The mechanistic features of modern protein polymerases have been used to guide the laboratory evolution of catalytic RNAs (ribozymes) that exhibit polymerase-like activity. Ribozymes have been developed that recognize a primer-template complex in a general way and catalyze the template-directed polymerization of mononucleotides. These experiments demonstrate that RNA replicase behavior is likely within the catalytic repertoire of RNA, although many obstacles remain to be overcome in order to demonstrate that RNA can catalyze its own replication in a manner that could have sustained a genetic system on the early Earth.

Evidence against a simple tethering model for enhancement of herpes simplex virus DNA polymerase processivity by accessory protein UL42

The DNA polymerase holoenzyme of herpes simplex virus type 1 (HSV-1) is a stable heterodimer consisting of a catalytic subunit (Pol) and a processivity factor (UL42). HSV-1 UL42 differs from most DNA polymerase processivity factors in possessing an inherent ability to bind to double-stranded DNA. It has been proposed that UL42 increases the processivity of Pol by directly tethering it to the primer and template (P/T). To test this hypothesis, we took advantage of the different sensitivities of Pol and Pol/UL42 activities to ionic strength. Although the activity of Pol is inhibited by salt concentrations in excess of 50 mM KCl, the activity of the holoenzyme is relatively refractory to changes in ionic strength from 50 to 125 mM KCl. We used nitrocellulose filter-binding assays and real-time biosensor technology to measure binding affinities and dissociation rate constants of the individual subunits and holoenzyme for a short model P/T as a function of the ionic strength of the buffer. We found that as observed for activity, the binding affinity and dissociation rate constant of the Pol/UL42 holoenzyme for P/T were not altered substantially in high- versus low-ionic-strength buffer. In 50 mM KCl, the apparent affinity with which UL42 bound the P/T did not differ by more than twofold compared to that observed for Pol or Pol/UL42 in the same low-ionic-strength buffer. However, increasing the ionic strength dramatically decreased the affinity of UL42 for P/T, such that it was reduced more than 3 orders of magnitude from that of Pol/UL42 in 125 mM KCl. Real-time binding kinetics revealed that much of the reduced affinity could be attributable to an extremely rapid dissociation of UL42 from the P/T in high-ionic-strength buffer. The resistance of the activity, binding affinity, and stability of the holoenzyme for the model P/T to increases in ionic strength, despite the low apparent affinity and poor stability with which UL42 binds the model P/T in high concentrations of salt, suggests that UL42 does not simply tether the Pol to DNA. Instead, it is likely that conformational alterations induced by interaction of UL42 with Pol allow for high-affinity and high-stability binding of the holoenzyme to the P/T even under high-ionic-strength conditions.

High processivity of the reverse transcriptase from a non-long terminal repeat retrotransposon

R2 is a retrotransposable element that specifically inserts into the 28 S rRNA genes of arthropods. The element encodes a single protein with endonuclease activity that cleaves the 28 S gene target site and reverse transcriptase (RT) activity that uses the cleaved DNA to prime reverse transcription. Here we compare various properties of the R2 RT activity with those of the well characterized retroviral RT, avian myeloblastosis virus (AMV). In processivity assays using heterogeneous RNA templates, R2 RT can synthesize cDNA over twice the length of that synthesized by AMV RT and can synthesize cDNA over 4 times longer than AMV RT in assays with poly(rA) templates. The higher processivity of R2 RT compared with retroviral RTs is a result of the slower rate of dissociation of the enzyme from RNA templates. The elongation rates of the two enzymes are similar. Finally, a highly distinct property of the R2 RT, compared with retroviral enzymes, is its ability to displace RNA strands annealed to RNA templates during cDNA synthesis. We suggest that both the higher processivity and displacement properties of R2 RT compared with retroviral RT result from the greater affinity of the R2 protein for the RNA template upstream of its active site.

Fidelity and processivity of DNA synthesis by DNA polymerase kappa, the product of the human DINB1 gene

Mammalian DNA polymerase kappa (pol kappa), a member of the UmuC/DinB nucleotidyl transferase superfamily, has been implicated in spontaneous mutagenesis. Here we show that human pol kappa copies undamaged DNA with average single-base substitution and deletion error rates of 7 x 10(-3) and 2 x 10(-3), respectively. These error rates are high when compared to those of most other DNA polymerases. pol kappa also has unusual error specificity, producing a high proportion of T.CMP mispairs and deleting and adding non-reiterated nucleotides at extraordinary rates. Unlike other members of the UmuC/DinB family, pol kappa can processively synthesize chains of 25 or more nucleotides. This moderate processivity may reflect a contribution of C-terminal residues, which include two zinc clusters. The very low fidelity and moderate processivity of pol kappa is novel in comparison to any previously studied DNA polymerase, and is consistent with a role in spontaneous mutagenesis.

The mechanism of action of T7 DNA polymerase

The recent crystal structure determination of T7 DNA polymerase complexed to a deoxynucleoside triphosphate and primer-template DNA has provided the first glimpse of a replicative DNA polymerase in a catalytic complex. The structure complements many functional and structural studies of this and other DNA polymerases, allowing a detailed evaluation of proposals for the mechanism of nucleotidyl transfer and the exploration of the basis for the high fidelity of template-directed DNA synthesis.