Community analysis of ammonia-oxidizing bacteria in activated sludge of eight wastewater treatment systems

Ammonia-Oxidizing Bacteria Maintain Abundance but Lower amoA-Gene Expression during Cold Temperature Nitrification Failure in a Full-Scale Municipal Wastewater Treatment Plant

In this study, we explore the relationship between community structure and transcriptional activity of ammonia-oxidizing bacteria during cold temperature nitrification failure in three parallel full-scale sequencing batch reactors (SBRs) treating municipal wastewater. In the three reactors, ammonia concentrations increased with declines in wastewater temperature below 15°C. We quantified and sequenced 16S rRNA and ammonia monooxygenase (amoA) gene fragments in DNA and RNA extracts from activated sludge samples collected from the SBRs during the warmer seasons (summer and fall) and when water temperatures were below 15°C (winter and spring). Taxonomic community composition of amoA genes and transcripts did not vary much between the warmer and colder seasons. However, we observed significant differences in amoA transcript copy numbers between fall (highest) and spring (lowest). Ammonia-oxidizing bacteria of the genus Nitrosomonas sp. could maintain their population abundance despite lowering their amoA gene expression during winter and spring. In spite of relatively low population abundance, an amoA amplicon sequence variant (ASV) cluster identified as most similar to the amoA gene of Nitrosospira briensis showed the highest amoA transcript-to-gene ratio throughout all four seasons, indicating that some nitrifiers remain active at wastewater temperatures below 15°C. Our results show that 16S rRNA and amoA gene copy numbers are limited predictors of cell activity. To optimize function and performance of mixed community bioprocesses, we need to collect high-resolution quantitative transcriptomic and potentially proteomic data to resolve the response of individual species to changes in environmental parameters in engineered systems. IMPORTANCE The diverse microbial community of activated sludge used in biological treatment systems exhibits dynamic seasonal shifts in community composition and activity. Many wastewater treatment plants in temperate/continental climates experience seasonal cold temperature nitrification failure. "Seasonal nitrification failure" is the discharge of elevated concentrations of ammonia (greater than 4 mg/liter) with treated wastewater during the winter (influent wastewater temperatures below 13°C). This study aims at expanding our understanding of how ammonia-oxidizing bacteria in activated sludge change in activity and growth across seasons. We quantified the ammonia monooxygenase (amoA) gene and transcript copy numbers using real-time PCR and sequenced the amoA amplicons to reveal community structure and activity changes of nitrifying microbial populations during seasonal nitrification failure in three full-scale sequencing batch reactors (SRBs) treating municipal wastewater. Relevant findings presented in this study contribute to explain seasonal nitrification performance variability in SRBs.

Charting the landscape of the environmental exposome

The exposome depicts the total exposures in the lifetime of an organism. Human exposome comprises exposures from environmental and humanistic sources. Biological, chemical, and physical environmental exposures pose potential health threats, especially to susceptible populations. Although still in its nascent stage, we are beginning to recognize the vast and dynamic nature of the exposome. In this review, we systematically summarize the biological and chemical environmental exposomes in three broad environmental matrices-air, soil, and water; each contains several distinct subcategories, along with a brief introduction to the physical exposome. Disease-related environmental exposures are highlighted, and humans are also a major source of disease-related biological exposures. We further discuss the interactions between biological, chemical, and physical exposomes. Finally, we propose a list of outstanding challenges under the exposome research framework that need to be addressed to move the field forward. Taken together, we present a detailed landscape of environmental exposome to prime researchers to join this exciting new field.

Improving Nitrogen Use Efficiency in Aerobic Rice Based on Insights Into the Ecophysiology of Archaeal and Bacterial Ammonia Oxidizers

The abundance and structural composition of nitrogen (N) transformation-related microbial communities under certain environmental conditions provide sufficient information about N cycle under different soil conditions. This study aims to explore the major challenge of low N use efficiency (NUE) and N dynamics in aerobic rice systems and reveal the agronomic-adjustive measures to increase NUE through insights into the ecophysiology of ammonia oxidizers. Water-saving practices, like alternate wetting and drying (AWD), dry direct seeded rice (DDSR), wet direct seeding, and saturated soil culture (SSC), have been evaluated in lowland rice; however, only few studies have been conducted on N dynamics in aerobic rice systems. Biological ammonia oxidation is majorly conducted by two types of microorganisms, ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB). This review focuses on how diversified are ammonia oxidizers (AOA and AOB), whose factors affect their activities and abundance under different soil conditions. It summarizes findings on pathways of N cycle, rationalize recent research on ammonia oxidizers in N-cycle, and thereby suggests adjustive agronomic measures to reduce N losses. This review also suggests that variations in soil properties significantly impact the structural composition and abundance of ammonia oxidizers. Nitrification inhibitors (NIs) especially nitrapyrin, reduce the nitrification rate and inhibit the abundance of bacterial amoA without impacting archaeal amoA. In contrast, some NIs confine the hydrolysis of synthetic N and, therefore, keep low NH₄ ⁺-N concentrations that exhibit no or very slight impact on ammonia oxidizers. Variations in soil properties are more influential in the community structure and abundance of ammonia oxidizers than application of synthetic N fertilizers and NIs. Biological nitrification inhibitors (BNIs) are natural bioactive compounds released from roots of certain plant species, such as sorghum, and could be commercialized to suppress the capacity of nitrifying soil microbes. Mixed application of synthetic and organic N fertilizers enhances NUE and plant N-uptake by reducing ammonia N losses. High salt concentration promotes community abundance while limiting the diversity of AOB and vice versa for AOA, whereas AOA have lower rate for potential nitrification than AOB, and denitrification accounts for higher N₂ production. Archaeal abundance, diversity, and structural composition change along an elevation gradient and mainly depend on various soil factors, such as soil saturation, availability of NH₄ ⁺, and organic matter contents. Microbial abundance and structural analyses revealed that the structural composition of AOA was not highly responsive to changes in soil conditions or N amendment. Further studies are suggested to cultivate AOA and AOB in controlled-environment experiments to understand the mechanisms of AOA and AOB under different conditions. Together, this evaluation will better facilitate the projections and interpretations of ammonia oxidizer community structural composition with provision of a strong basis to establish robust testable hypotheses on the competitiveness between AOB and AOA. Moreover, after this evaluation, managing soils agronomically for potential utilization of metabolic functions of ammonia oxidizers would be easier.

Treatment of municipal wastewater by employing membrane bioreactors combined with efficient nitration microbial communities isolated by Isolation Chip with Plate Streaking technology

In this research, we developed a method so-called Isolation Chip with Plate Streaking (ICPS) to selectively enrich nitrifying microbial consortium for treating municipal wastewater. In batch experiment, these bacterial communities were able to remove NH₃ -N in 72 h with an efficiency of 96%. Firmicutes, Bacteroidetes, and Proteobacteria species are dominant bacteria in these communities. When the bacterial communities were used in the membrane bioreactor under typical condition, the removal efficiency was 81.0%. In contrast, under the actual wastewater condition, the efficiency could reach 91.2%. All above results showed clearly that the consortium selected by our ICPS method could achieve high-efficient NH₃ -N removal, thus offering a reliable technique for screening functional microorganisms in the field of water treatment. PRACTITIONER POINTS: ICPS technology was designed and used for screening specialized NH₃ -N-removing isolates. The screening process benefited the growth of the dominant nitrifying bacteria Firmicutes and Bacteroidetes. When the functional bacteria applied into the MBR, the NH₃ -N removal efficiency was 91.2% under actual wastewater conditions.

A review of partial nitrification in biological nitrogen removal processes: from development to application

To further reduce the energy consumption in the wastewater biological nitrogen removal process, partial nitrification and its integrated processes have attracted increasing attentions owing to their economy and efficiency. Shortening the steps of ammonia oxidation to nitrate saves a large amount of aeration, and the accumulated nitrite could be reduced by denitritation or anammox, which requires less electron donors compared with denitrification. Therefore, the strategies through mainstream suppression and sidestream inhibition for the achievement of partial nitrification in recent years are reviewed. Specifically, the enrichment strategies of functional microorganisms are obtained on the basis of their growth and metabolic characteristics under different selective pressures. Furthermore, the promising developments, current application bottlenecks and possible future trends of some biological nitrogen removal processes integrating partial nitrification are discussed. The obtained knowledge would provide a new idea for the fast realization of economic, efficient and long-term stable partial nitrification and biological nitrogen removal process.

High-strength anaerobic digestion wastewater treatment by aerobic granular sludge in a step-by-step strategy

To reduce the instability of aerobic granular sludge (AGS) caused by high-strength anaerobic digestion wastewater, a strategy of increasing proportion of anaerobic digestion wastewater step-by-step was adopted in this study. High-performance stable AGSs were successfully cultivated with sequencing batch reactors by this strategy, which could efficiently treat high-strength anaerobic digestion wastewater with an influent chemical oxygen demand (COD) up to 5090 mg⋅L^-1. After six phases of stepwise increasing COD loads, the sludge sizes increased from 0.5 mm to 1.5 mm, with the final mixed liquor suspended solids increased to 13,814 mg⋅L^-1, and the final sludge volume index decreased to 15 mL⋅g^-1. The extracellular polymeric substance (EPS), which is crucial to keep the stability of AGS, increased continuously from 85.1 mg⋅g^-1 SS to 307.8 mg⋅g^-1 SS with the increase of COD loads. Moreover, the removal efficiency of COD and TN could reach 92% and 87% for real high-strength anaerobic digestion wastewater treatment. The bacterial community analysis revealed that the family Rhodocyclaceae, Flavobacteriaceae, and Xanthomonadaceae were the major microbes of AGS, and were responsible for COD and TN removal, as well as EPS secretion. These findings may provide novel information and enrich AGS treatment of high-strength real wastewater.

Selective enrichment of heterotrophic nitrifiers Alcaligenaceae and Alcanivorax spp. from industrial wastewaters

Removal of nitrogen from wastewaters (WW) represents a global problem. The low nitrification rate during WW treatment is often caused by ecotoxicity. This problem is attributed mostly to the industrial WW. Our study was focused on the testing of industrial WW and activated sludge (AS) with the aim to reveal the abundance of nitrifiers and increase their biomass, thus, providing the additional step, i.e., bioaugmentation, within the technological process of WW treatment. Plating of AS on the selective solidified media designated for the 1st and 2nd nitrification stages, resulted in the shift in bacterial community structure with dominated Alcaligenaceae and Alcanivorax for the 1st stage, and Alcanivorax-for the 2nd stage of nitrification, respectively. Incubation of AS in the presence of real WW and selective nitrification broth resulted in a considerable increase (one or two magnitudes in the presence of the 1st and 2nd stage nitrification broth, respectively) of culturable nitrifiers after 5 days incubation under aerated conditions. The obtained data provide with evidence about a possibility to strengthen the role of heterotrophic nitrifiers in the treatment of industrial WW, where toxicity obstacles inhibited nitrification under conventional conditions.

Effects of different wastewater characteristics and treatment techniques on the bacterial community structure in three pharmaceutical wastewater treatment systems

Pharmaceutical wastewater is a typical type of wastewater with high concentrations of organic pollutants, but research on this subject is limited. The aeration tanks of three different pharmaceutical wastewater treatment systems were seeded with the same inocula and stably operated for 40 days. Then, aerobic sludge samples from the three aeration tanks were collected to provide insight into the bacterial community composition of the activated sludges. Additionally, we investigated the effects of wastewater characteristics and the type and operation of the technological system on the microbial communities. High-throughput sequencing analysis demonstrated that the communities enriched in the three reactors had differing. The dominant phyla detected were Proteobacteria, Chloroflexi, Bacteroidetes and candidate division TM7, while the dominant clones were uncultured Candidatus Saccharibacteria bacterium, uncultured Saprospiraceae bacterium, PHOS-HE51(AF314433.1), uncultured Anaerolineaceae bacterium and Blastocatella, suggesting their importance in pharmaceutical wastewater treatment plants. According to the wastewater parameters and canonical correspondence analyses, we can conclude that uncultured Candidatus Saccharibacteria bacterium, uncultured Anaerolineaceae bacterium and Blastocatella contribute to ammonium nitrogen ( ) removal; uncultured Saprospiraceae bacterium plays an important role in treating nitrogen; and chemical oxygen demand and PHOS-HE51 contribute to total phosphorus removal.

Performance of a sequencing-batch membrane bioreactor (SMBR) with an automatic control strategy treating high-strength swine wastewater

Due to high-strength of organic matters, nutrients and pathogen, swine wastewater is a major source of pollution to rural environment and surface water. A sequencing-batch membrane bioreactor (SMBR) system with an automatic control strategy was developed for high-strength swine wastewater treatment. Short-cut nitrification and denitrification (SND) was achieved at nitrite accumulation rate of 83.6%, with removal rates of COD, NH₄⁺-N and TN at 95%, 99% and 93%, respectively, at reduced HRT of 6.0 d and TN loading rate of 0.02kgN/(kgVSS d). With effective membrane separation, the reduction of total bacteria (TB) and putative pathogen were 2.77 logs and 1%, respectively. The shift of microbial community was well responded to controlling parameters. During the SND process, ammonia oxidizing bacteria (AOB) (Nitrosomonas, Nitrosospira) and nitrite oxidizing bacteria (NOB) (Nitrospira) were enriched by 52 times and reduced by 2 times, respectively. The denitrifiers (Thauera) were well enriched and the diversity was enhanced.

A review: Driving factors and regulation strategies of microbial community structure and dynamics in wastewater treatment systems

The performance and stabilization of biological wastewater treatment systems ¹are closely related to the microbial community structure and dynamics. In this paper, the effects and mechanisms of influent composition, process configuration, operating parameters (dissolved oxygen [DO], pH, hydraulic retention time [HRT] and sludge retention time [SRT]) and environmental condition (temperature) to the change of microbial community structure and process performance (nitrification, denitrification, biological phosphorus removal, organics mineralization and utilization, etc.) are critically reviewed. Furthermore, some strategies for microbial community structure regulation, mainly bioaugmentation, process adjustment and operating parameters optimization, applied in the current wastewater treatment systems are also discussed. Although the recent studies have strengthened our understanding on the relationship between microbial community structure and wastewater treatment process performance, how to fully tap the microbial information, optimize the microbial community structure and maintain the process performance in wastewater treatment systems are still full of challenges.

The Composition and Spatial Patterns of Bacterial Virulence Factors and Antibiotic Resistance Genes in 19 Wastewater Treatment Plants

Bacterial pathogenicity and antibiotic resistance are of concern for environmental safety and public health. Accumulating evidence suggests that wastewater treatment plants (WWTPs) are as an important sink and source of pathogens and antibiotic resistance genes (ARGs). Virulence genes (encoding virulence factors) are good indicators for bacterial pathogenic potentials. To achieve a comprehensive understanding of bacterial pathogenic potentials and antibiotic resistance in WWTPs, bacterial virulence genes and ARGs in 19 WWTPs covering a majority of latitudinal zones of China were surveyed by using GeoChip 4.2. A total of 1610 genes covering 13 virulence factors and 1903 genes belonging to 11 ARG families were detected respectively. The bacterial virulence genes exhibited significant spatial distribution patterns of a latitudinal biodiversity gradient and a distance-decay relationship across China. Moreover, virulence genes tended to coexist with ARGs as shown by their strongly positive associations. In addition, key environmental factors shaping the overall virulence gene structure were identified. This study profiles the occurrence, composition and distribution of virulence genes and ARGs in current WWTPs in China, and uncovers spatial patterns and important environmental variables shaping their structure, which may provide the basis for further studies of bacterial virulence factors and antibiotic resistance in WWTPs.

Assessing the composition of microbial communities in textile wastewater treatment plants in comparison with municipal wastewater treatment plants

It is assumed that microbial communities involved in the biological treatment of different wastewaters having a different chemical composition harbor different microbial populations which are specifically adapted to the environmental stresses encountered in these systems. Yet, little is known about the composition of these microbial communities. Therefore, the aim of this study was to assess the microbial community composition over two seasons (winter and summer) in activated sludge from well‐operating textile wastewater treatment plants (WWTPs) in comparison with municipal WWTPs, and to explain observed differences by environmental variables. 454‐pyrosequencing generated 160 archaeal and 1645 bacterial species‐level Operational Taxonomic Units (OTUs), with lower observed richness in activated sludge from textile WWTPs compared to municipal WWTPs. The bacterial phyla Planctomycetes, Chloroflexi, Chlorobi, and Acidobacteria were more abundant in activated sludge samples from textile WWTPs, together with archaeal members of Thaumarchaeota. Nonmetric multidimensional scaling analysis of the microbial communities showed that microbial communities from textile and municipal WWTPs were significantly different, with a seasonal effect on archaea. Nitrifying and denitrifying bacteria as well as phosphate‐accumulation bacteria were more abundant in municipal WWTPs, while sulfate‐reducing bacteria were almost only detected in textile WWTPs. Additionally, microbial communities from textile WWTPs were more dissimilar than those of municipal WWTPs, possibly due to a wider diversity in environmental stresses to which microbial communities in textile WWTPs are subjected to. High salinity, high organic loads, and a higher water temperature were important potential variables driving the microbial community composition in textile WWTPs. This study provides a general view on the composition of microbial communities in activated sludge of textile WWTPs, and may provide novel insights for identifying key players performing important functions in the purification of textile wastewaters.

A pilot-scale study on PVA gel beads based integrated fixed film activated sludge (IFAS) plant for municipal wastewater treatment

In the present study, a pilot-scale reactor incorporating polyvinyl alcohol gel beads as biomass carrier and operating in biological activated sludge mode (a combination of moving bed biofilm reactor (MBBR) and activated sludge) was investigated for the treatment of actual municipal wastewater. The results, during a monitoring period of 4 months, showed effective removal of chemical oxygen demand (COD), biological oxygen demand (BOD) and NH3-N at optimum conditions with 91%, ∼92% and ∼90% removal efficiencies, respectively. Sludge volume index (SVI) values of activated sludge varied in the range of 25-72 mL/g, indicating appreciable settling characteristics. Furthermore, soluble COD and BOD in the effluent of the pilot plant were reduced to levels well below discharge limits of the Punjab Pollution Control Board, India. A culture dependent method was used to enrich and isolate abundant heterotrophic bacteria in activated sludge. In addition to this, 16S rRNA genes analysis was performed to identify diverse dominant bacterial species in suspended and attached biomass. Results revealed that Escherichia coli, Pseudomonas sp. and Nitrosomonas communis played a significant role in biomass carrier, while Acinetobactor sp. were dominant in activated sludge of the pilot plant. Identification of ciliated protozoa populations rendered six species of ciliates in the plant, among which Vorticella was the most dominant.

Nitrifying biomass characterization and monitoring during bioaugmentation in a membrane bioreactor

A membrane bioreactor (MBR), fed with domestic wastewater, was bioaugmented with nitrifying biomass selected in a side-stream MBR fed with a synthetic high nitrogen-loaded influent. Microbial communities evolution was monitored and comparatively analysed through an extensive bio-molecular investigation (16S rRNA gene library construction and terminal-restriction fragment length polymorphism techniques) followed by statistical analyses. As expected, a highly specialized nitrifying biomass was selected in the side-stream reactor fed with high-strength ammonia synthetic wastewater. The bioaugmentation process caused an increase of nitrifying bacteria of the genera Nitrosomonas (up to more than 30%) and Nitrobacter in the inoculated MBR reactor. The overall structure of the microbial community changed in the mainstream MBR as a result of bioaugmentation. The effect of bioaugmentation in the shift of the microbial community was also verified through statistical analysis.

Impact of oxygen on the coexistence of nitrification, denitrification, and sulfate reduction in oxygen-based membrane aerated biofilm

Membrane aerated biofilms (MABs) are subject to "counter diffusion" of oxygen and substrates. In a membrane aerated biofilm reactor, gases (e.g., oxygen) diffuse through the membrane into the MAB, and liquid substrates pass from the bulk liquid into the MAB. This behavior can result in a unique biofilm structure in terms of microbial composition, distribution, and community activity in the MAB. Previous studies have shown simultaneous aerobic oxidation, nitrification, and denitrification within a single MAB. Using molecular techniques, we investigated the growth of sulfate-reducing bacteria (SRB) in the oxygen-based MAB attached to a flat sheet membrane. Denaturing gradient gel electrophoresis of the amplified 16S rRNA gene fragments and functional gene fragments specific for ammonia-oxidizing bacteria (amoA), denitrifying bacteria (nirK), and SRB (dsrB) demonstrated the coexistence of nitrifiers, denitrifiers, and SRB communities within a single MAB. The functional diversities of SRB and denitrifiers decreased with an increase in the oxygen concentration in the bulk water of the reactor.

Microbial community functional structures in wastewater treatment plants as characterized by GeoChip

Background

Biological WWTPs must be functionally stable to continuously and steadily remove contaminants which rely upon the activity of complex microbial communities. However, knowledge is still lacking in regard to microbial community functional structures and their linkages to environmental variables.

Aims

To investigate microbial community functional structures of activated sludge in wastewater treatment plants (WWTPs) and to understand the effects of environmental factors on their structure.

Methods

12 activated sludge samples were collected from four WWTPs in Beijing. A comprehensive functional gene array named GeoChip 4.2 was used to determine the microbial functional genes involved in a variety of biogeochemical processes such as carbon, nitrogen, phosphorous and sulfur cycles, metal resistance, antibiotic resistance and organic contaminant degradation.

Results

High similarities of the microbial community functional structures were found among activated sludge samples from the four WWTPs, as shown by both diversity indices and the overlapped genes. For individual gene category, such as egl, amyA, lip, nirS, nirK, nosZ, ureC, ppx, ppk, aprA, dsrA, sox and benAB, there were a number of microorganisms shared by all 12 samples. Canonical correspondence analysis (CCA) showed that the microbial functional patterns were highly correlated with water temperature, dissolved oxygen (DO), ammonia concentrations and loading rate of chemical oxygen demand (COD). Based on the variance partitioning analyses (VPA), a total of 53% of microbial community variation from GeoChip data can be explained by wastewater characteristics (25%) and operational parameters (23%), respectively.

Conclusions

This study provided an overall picture of microbial community functional structures of activated sludge in WWTPs and discerned the linkages between microbial communities and environmental variables in WWTPs.

Microbial community composition of a down-flow hanging sponge (DHS) reactor combined with an up-flow anaerobic sludge blanket (UASB) reactor for the treatment of municipal sewage

The microbial community composition of a down-flow hanging sponge (DHS) reactor in an up-flow anaerobic sludge blanket (UASB)-DHS system used for the treatment of municipal sewage was investigated. The clone libraries showed marked differences in microbial community composition at different reactor heights and in different seasons. The dominant phylotypes residing in the upper part of the reactor were likely responsible for removing organic matters because a significant reduction in organic matter in the upper part was observed. Quantification of the amoA genes revealed that the proportions of ammonia oxidizing bacteria (AOB) varied along the vertical length of the reactor, with more AOB colonizing the middle and lower parts of the reactor than the top of the reactor. The findings indicated that sewage treatment was achieved by a separation of microbial habitats responsible for organic matter removal and nitrification in the DHS reactor.

Analysis of biofilm bacterial communities responsible for carbon removal through a reactor cascade treating wastewater

In this study molecular microbiological and multivariate statistical analyses were carried out to determine the structure and dynamics of bacterial communities through a biofilm based, pilot-scale wastewater treatment cascade system comprised of eight reactors. Results indicated a vertical as well as horizontal differentiation of biofilm bacterial communities within individual reactors and through the reactor series, respectively. The richness of biofilm samples taken from dissolved oxygen rich sections of reactors were relatively lower than of samples taken from less oxygenized sections (one-way ANOVA P = 0.07). The Euclidean distance based one-way ANOSIM pointed out that in bacteriological point of view: (1) no statistically significant difference could be observed among the first five reactors (P ≥ 0.1); (2) the first seven reactors differed significantly from the last reactor, (P ≤ 0.03); (3) reactors 1 and 2 differed significantly from reactors 6 and 7 (P ≈ 0.02) and (4) reactor 3 from reactor 7 (P ≈ 0.03). 16S rRNA gene cloning revealed that through the cascade system the initially dominant heterotrophic bacteria (Acinetobacter, Acidovorax, Parabacteroides, Thauera, Desulfobacterium and Desulfomicrobium) were gradually replaced or supplemented by autotrophic nitrifying bacteria (Nitrosomonas, 'Candidatus Nitrotoga' and Nitrospira). Our results indicate that the vertical alteration of bacterial community structure within a particular reactor was driven by the alteration of dissolved oxygen concentration, while the horizontal alteration of bacterial community structure through the cascade system was driven mainly by the gradually decreasing dissolved organic matter content and increasing dissolved oxygen concentration.

Population dynamics of bacteria involved in enhanced biological phosphorus removal in Danish wastewater treatment plants

The enhanced biological phosphorus removal (EBPR) process is increasingly popular as a sustainable method for removal of phosphorus (P) from wastewater. This study consisted of a comprehensive three-year investigation of the identity and population dynamics of polyphosphate-accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs) in 28 Danish municipal wastewater treatment plants with nutrient removal. Fluorescence in situ hybridization was applied to quantify ten probe-defined populations of PAO and GAO that in total constituted a large fraction (30% on average) of the entire microbial community targeted by the EUBmix probes. Two PAO genera, Accumulibacter and Tetrasphaera, were very abundant in all EBPR plants (average of 3.7% and 27% of all bacteria, respectively), and their abundance was relatively stable in the Danish full-scale plants without clear temporal variations. GAOs were occasionally present in some plants (Competibacter in 11 plants, Defluviicoccus in 6 plants) and were consistent in only a few plants. This shows that these were not core species in the EBPR communities. The total GAO abundance was always lower than that of Accumulibacter. In plants without EBPR design, the abundance of PAO and GAO was significantly lower. Competibacter correlated in general with high fraction of industrial wastewater. In specific plants Accumulibacter correlated with high C/P ratio of the wastewater and Tetrasphaera with high organic loading. Interestingly, the relative microbial composition of the PAO/GAO species was unique to each plant over time, which gives a characteristic plant-specific "fingerprint".

Configuration of biological wastewater treatment line and influent composition as the main factors driving bacterial community structure of activated sludge

The structure of microbial consortia in wastewater treatment facilities is a resultant of environmental conditions created by the operational parameters of the purification process. In the research, activated sludge from nine Polish wastewater treatment plants (WWTPs) was investigated at a molecular level to determine the impact of the complexity of biological treatment line and the influent composition on the species structure and the diversity of bacterial consortia. The community fingerprints and technological data were subjected to the canonical correspondence and correlation analyses. The number of separated biological processes realized in the treatment line and the presence of industrial wastewater in the influent were the key factors determining the species structure of total and ammonia-oxidizing bacteria in biomass. The N₂O-reducers community composition depended significantly on the design of the facility; the highest species richness of denitrifiers was noted in the WWTPs with separated denitrification tanks. The contribution of industrial streams to the inflow affected the diversity of total and denitrifying bacterial consortia and diminished the diversity of ammonia oxidizers. The obtained data are valuable for engineers since they revealed the main factors, including the design of wastewater treatment plant, influencing the microbial groups critical for the stability of purification processes.

Analysis of microbial population dynamics in a partial nitrifying SBR at ambient temperature

In this study, a lab-scale partial nitrifying sequencing batch reactor (SBR) was developed to investigate partial nitrification at ambient temperature (16-22 °C). Techniques of denaturing gradient gel electrophoresis (DGGE), cloning, and fluorescence in situ hybridization (FISH) were utilized simultaneously to study microbial population dynamics. Partial nitrification was effectively achieved in response to shifts of influent ammonium concentrations. DGGE results showed that higher ammonia concentration referred to lower ammonia-oxidizing bacteria (AOB) diversity in the SBR. Phylogenetic analysis revealed that all the predominant AOB was affiliated with Nitrosomonas genus. FISH analysis illustrated AOB was the predominant nitrifying bacteria of microbial compositions when SBR achieved partial nitrification (PN) at ambient temperature.

Bacterial community dynamics in full-scale activated sludge bioreactors: operational and ecological factors driving community assembly and performance

The assembling of bacterial communities in conventional activated sludge (CAS) bioreactors was thought, until recently, to be chaotic and mostly unpredictable. Studies done over the last decade have shown that specific, and often, predictable random and non-random factors could be responsible for that process. These studies have also motivated a “structure–function” paradigm that is yet to be resolved. Thus, elucidating the factors that affect community assembly in the bioreactors is necessary for predicting fluctuations in community structure and function. For this study activated sludge samples were collected during a one-year period from two geographically distant CAS bioreactors of different size. Combining community fingerprinting analysis and operational parameters data with a robust statistical analysis, we aimed to identify relevant links between system performance and bacterial community diversity and dynamics. In addition to revealing a significant β-diversity between the bioreactors’ communities, results showed that the largest bioreactor had a less dynamic but more efficient and diverse bacterial community throughout the study. The statistical analysis also suggests that deterministic factors, as opposed to stochastic factors, may have a bigger impact on the community structure in the largest bioreactor. Furthermore, the community seems to rely mainly on mechanisms of resistance and functional redundancy to maintain functional stability. We suggest that the ecological theories behind the Island Biogeography model and the species-area relationship were appropriate to predict the assembly of bacterial communities in these CAS bioreactors. These results are of great importance for engineers and ecologists as they reveal critical aspects of CAS systems that could be applied towards improving bioreactor design and operation.

Population dynamics of filamentous bacteria in Danish wastewater treatment plants with nutrient removal

Bulking and foaming are two frequently occurring operational problems in activated sludge wastewater treatment plants, and these problems are mainly associated with excessive growth of filamentous bacteria. In this study, a comprehensive investigation of the identity and population dynamics of filamentous bacteria in 28 Danish municipal treatment plants with nutrient removal has been carried out over three years. Fluorescence in situ hybridization was applied to quantify more than twenty probe-defined populations of filamentous bacteria that in total constituted a large fraction of the entire microbial community, on average 24%. Despite the majority being present within the flocs, they occasionally caused settling problems in most of the plants. A low diversity of probe-defined filamentous bacteria was found in the plants with Microthrix and various species belonging to phylum Chloroflexi (e.g., type 0803 and type 0092) as the most abundant. Few other filamentous probe-defined species were found revealing a large similarity between the filamentous populations in the plants investigated. The composition of filamentous populations was stable in each plant with only minor changes in relative abundances observed during the three-year study period. The relative composition of the different species was unique to each plant giving a characteristic "fingerprint". Comprehensive statistical analyses of the presence and abundance of the filamentous organisms did not reveal many correlations with a particular plant design or process parameter.

Ammonia oxidizing bacteria community dynamics in a pilot-scale wastewater treatment plant

Background

Chemoautotrophic ammonia oxidizing bacteria (AOB) have the metabolic ability to oxidize ammonia to nitrite aerobically. This metabolic feature has been widely used, in combination with denitrification, to remove nitrogen from wastewater in wastewater treatment plants (WWTPs). However, the relative influence of specific deterministic environmental factors to AOB community dynamics in WWTP is uncertain. The ecological principles underlying AOB community dynamics and nitrification stability and how they are related are also poorly understood.

Methodology/Principal Findings

The community dynamics of ammonia oxidizing bacteria (AOB) in a pilot-scale WWTP were monitored over a one-year period by Terminal Restriction Fragment Length Polymorphism (T-RFLP). During the study period, the effluent ammonia concentrations were almost below 2 mg/L, except for the first 60 days, indicting stable nitrification. T-RFLP results showed that, during the test period with stable nitrification, the AOB community structures were not stable, and the average change rate (every 15 days) of AOB community structures was 10%±8%. The correlations between T-RFLP profiles and 10 operational and environmental parameters were tested by Canonical Correlation Analysis (CCA) and Mantel test. The results indicated that the dynamics of AOB community correlated most strongly with Dissolved Oxygen (DO), effluent ammonia, effluent Biochemical Oxygen Demand (BOD) and temperature.

Conclusions/Significance

This study suggests that nitrification stability is not necessarily accompanied by a stable AOB community, and provides insight into parameters controlling the AOB community dynamics within bioreactors with stable nitrification.

Analysis of ammonia-oxidizing bacteria dominating in lab-scale bioreactors with high ammonium bicarbonate loading

The ammonia-oxidizing bacterial community (AOB) was investigated in two types of laboratory-scale bioreactors performing partial oxidation of ammonia to nitrite or nitrate at high (80 mM) to extremely high (428 mM) concentrations of ammonium bicarbonate. At all conditions, the dominant AOB was affiliated to the Nitrosomonas europaea lineage as was determined by fluorescence in situ hybridization and polymerase chain reaction in combination with denaturing gradient gel electrophoresis. Molecular analysis of the mixed populations, based on the 16S rRNA and cbbL genes, demonstrated the presence of two different phylotypes of Nitrosomonas, while microbiological analysis produced a single phylotype, represented by three different morphotypes. One of the most striking features of the AOB populations encountered in the bioreactors was the domination of highly aggregated obligate microaerophilic Nitrosomonas, with unusual cellular and colony morphology, commonly observed in nitrifying bioreactors but rarely investigated by cultural methods. The latter is probably not an adaptation to stressful conditions created by high ammonia or nitrite concentrations, but oxygen seems to be a stressful factor in these bioreactors.

Abundance of amoA genes of ammonia-oxidizing archaea and bacteria in activated sludge of full-scale wastewater treatment plants

In this study, the abundance and sequences of amoA genes of ammonia-oxidizing archaea (AOA) and bacteria (AOB) were determined in seven wastewater treatment plants (WWTPs) whose ammonium concentrations in influent and effluent wastewaters varied considerably (5.6-422.3 mgN l(-1) and 0.2-29.2 mgN l(-1), respectively). Quantitative real-time PCR showed that the comparative abundance of AOA and AOB amoA genes differed among the WWTPs. In all three industrial WWTPs, where the influent and effluent contained the higher levels of ammonium (36.1-422.3 mgN l(-1) and 5.3-29.2 mgN l(-1), respectively), more than four orders of magnitude higher numbers of AOB amoA genes than AOA amoA genes arose (with less than the limit of detection of AOA amoA genes). In contrast, significant numbers of AOA amoA genes occurred in all municipal WWTPs (with ammonium levels in the influent and effluent of 5.6-11.0 mgN l(-1) and 0.2-3.0 mgN l(-1), respectively). Statistical analysis suggested that compared to other plants' parameters, the ammonium levels in the plants' effluent showed correlation with the highest p value to the abundance of AOA amoA genes.

The community analysis of ammonia-oxidizing bacteria in wastewater treatment plants revealed by the combination of double labeled T-RFLP and sequencing

The functional gene of amoA, which produces the α-subunit of ammonia monooxygenase (AMO), has been analyzed to reveal the microbial community structure of ammonia-oxidizing bacteria (AOB) by culture-independent methods. In this study, the distribution of the amoA gene in 10 wastewater treatment plants (WWTPs) was revealed by the fingerprinting method of terminal restriction fragment length polymorphism (T-RFLP) and comparative sequencing. T-RFLP showed diverse communities of AOB in the modified Ludzack-Ettinger process, in the anaerobic-anoxic-oxic processes, in the hanging biological contactor, and in the sequencing batch reactor. In all of these environments, long solid retention time (SRT) was expected to be the critical factor for maintaining the diverse AOB community structure. Because T-RFLP does not offer sufficient information to confirm the phylogenetic information of AOB, the microbial community structures were analyzed by comparative sequencing for seven samples that were selected by the statistical categorization using principal component analysis (PCA) among 14 samples. The phylogenetic tree of 21 operational taxonomic units (OTUs) among 88 clones obtained in this study revealed that AOB of Nitrosomonas oligotropha and europaea lineages were predominant in WWTPs. Double labeled T-RFLP produced group-specific terminal restriction fragments (T-RFs) representing several groups of AOB and offered advanced resolution comparing with the single labeled T-RFLP.

Isolation and characterization of facultative mixotrophic ammonia-oxidizing bacteria from constructed wetlands

Autotrophic ammonia-oxidizing bacteria (AOB) have been widely studied in constructed wetlands systems, while mixotrophic AOB have been less thoroughly examined. Heterotrophic bacteria were isolated from wastewater and rhizospheres of macrophytes of constructed wetlands, and then cultivated in a mixotrophic medium containing ammonium and acetic acid. A molecular characterization was accomplished using ITS-PCR amplification, and phylogenetic analysis based on 16S rRNA gene sequences. Results showed the presence of 35 bacteria, among 400 initially heterotrophic isolates, that were able to remove ammonia. These 35 isolates were classified into 10 genetically different groups based on ITS pattern. Then, a collection of 10 isolates were selected because of their relatively high ammonia removal efficiencies (ARE > or = 80%) and their phylogenetic diversity. In conditions of mixotrophy, these strains were shown to be able to grow (increase of optical density OD660 during incubation with assimilation of nitrogen into cellular biomass) and to oxidize ammonia (important ammonia oxidation efficiencies, AOE between 79% and 87%). Among these facultative mixotrophic AOB, four isolates were genetically related to Firmicutes (Bacillus and Exiguobacterium), three isolates were affiliated to Actinobacteria (Arthrobacter) and three other isolates were associated with Proteobacteria (Pseudomonas, Ochrobactrum and Bordetella).