Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

Assessment of dimethyl sulphide odorous emissions during coal extraction process in Coal Mine Velenje

Underground coal extraction at Coal Mine Velenje occasionally gives rise to odour complaints from local residents. This manuscript describes a robust quantification of odorous emissions of mine sources and a model-based analysis aimed to establish a better understanding of the sources, concentrations, dispersion, and possible control of odorous compounds during coal extraction process. Major odour sources during underground mining are released volatile sulphur compounds from coal seam that have characteristic malodours at extremely low concentrations at micrograms per cubic metre (μg/m3) levels. Analysis of 1028 gas samples taken over a 6-year period (2008-2013) reveals that dimethyl sulphide ((CH3)2S) is the major odour active compound present in the mine, being detected on 679 occasions throughout the mine, while hydrogen sulphide (H2S) and sulphur dioxide (SO2) were detected 5 and 26 times. Analysis of gas samples has shown that main DMS sources in the mine are coal extraction locations at longwall faces and development headings and that DMS is releasing during transport from main coal transport system. The dispersion simulations of odour sources in the mine have shown that the concentrations of DMS at median levels can represent relatively modest odour nuisance. While at peak levels, the concentration of DMS remained sufficiently high to create an odour problem both in the mine and on the surface. Overall, dispersion simulations have shown that ventilation regulation on its own is not sufficient as an odour abatement measure.

Interaction of tetrahydrofuran and methyl tert-butyl ether in waste gas treatment by a biotrickling filter bioaugmented with Piscinibacter caeni MQ-18 and Pseudomonas oleovorans DT4

Bioaugmented biotrickling filter (BTF) seeded with Piscinibacter caeni MQ-18, Pseudomonas oleovorans DT4, and activated sludge was established to investigate the treatment performance and biodegradation kinetics of the gaseous mixtures of tetrahydrofuran (THF) and methyl tert-butyl ether (MTBE). Experimental results showed an enhanced startup performance with a startup period of 9 d in bioaugmented BTF (25 d in control BTF seeded with activated sludge). The interaction parameter I_2,1 of control (7.462) and bioaugmented BTF (3.267) obtained by the elimination capacity-sum kinetics with interaction parameter (EC-SKIP) model indicated that THF has a stronger inhibition of MTBE biodegradation in the control BTF than in the bioaugmented BTF. Similarly, the self-inhibition EC-SKIP model quantified the positive effects of MTBE on THF biodegradation, as well as the negative effects of THF on MTBE biodegradation and the self-inhibition of MTBE and THF. Metabolic intermediate analysis, real-time quantitative polymerase chain reaction, biofilm-biomass determination, and high-throughput sequencing revealed the possible mechanism of the enhanced treatment performance and biodegradation interactions of MTBE and THF.

Integrated sensing array of the perovskite-type LnFeO3 (Ln˭La, Pr, Nd, Sm) to discriminate detection of volatile sulfur compounds

Distinguishing toxic gases among the various volatile sulfur compounds (VSCs) is of significant practical value for atmospheric and environmental pollution monitoring, industrial monitoring, and even for medical diagnostics (where VSCs are indicators of diseases). The particular challenge lies in the detection and discrimination of sulfur-containing gases such as dimethyl disulfide (DMDS), methyl sulfide (DMS), hydrogen sulfide (H₂S), and carbon disulfide (CS₂) is of value. Herein, single-phase perovskite-type LnFeO₃ nanoparticles were prepared by the citrate sol-gel method. Their gas sensing characteristics regard to the four typical VSCs were investigated. We found that the gas response of the p-type semiconductor LnFeO₃ gas sensors to the four typical VSCs are significantly different. In addition, the sensors offer high performance, good tolerance to environmental changes and long-term stability for detecting VSCs gas at an operating temperature of 210 °C. A new design of sensor array was realized by integrating a series of LnFeO₃ materials, which revealed excellent recognition ability for various VSCs, showing promise for real time monitoring.

Investigation of reactive oxygen species produced by microwave electrodeless discharge lamp on oxidation of dimethyl sulfide

Microwave electrodeless discharge lamp (MEDL) has been regarded as a powerful light source of photoreaction. Four kinds of chemicals, nitrogen (N₂), oxygen (O₂), water (H₂O) and dimethyl sulfide (DMS), were used as molecular probes to explore the generation process of reactive oxygen species (ROS) and their photo-oxidation performances on the photodegradation of organic pollutants with application of an exterior MEDL system. ROS such as O (³P), O₃, O (¹D) and ¹O₂ were generated via irradiation of O₂ and H₂O except dry N₂ by MEDL. They were transformed to other ROS including ·OH and H₂O₂ with increase of relative humidity. The ROS productivity was inhibited evidently by humidity and ·OH became the major active species at high humidity. An optimal mineralization rate of 23.6% for DMS photodegradation was reached in dry air compared with 8.74% at high humidity, which indicated that O (¹D) and ¹O₂ were more powerful oxidants than O₃ and OH. The results showed that the higher mineralization rate of organic pollutants was obtained by increasing the generation efficiency of ROS of O (¹D) and ¹O₂. Furthermore, the results provided an alternative to develop intensification technology on photodegadation of organic pollutants with MEDL system and an optimal operation process including photocatalyst and humidity.

A solid composite microbial inoculant for the simultaneous removal of volatile organic sulfide compounds: Preparation, characterization, and its bioaugmentation of a biotrickling filter

Volatile organic sulfide compounds (VOSCs) are usually resistant to biodegradation, thereby limiting the performance of traditional biotechnology dealing with waste gas containing such pollutants especially in mixture. In this study, a solid composite microbial inoculant (SCMI) was prepared to remove dimethyl sulfide (DMS) and propanethiol (PT). Given that the DMS degradation activity of Alcaligenes sp. SY1 is inducible and the PT-degradation activity of Pseudomonas putida S-1 is constitutive, different strategies are designed for cell cultivation to obtain high VOSC removal rates of SCMI. Compared with the microbial suspension, the prepared SCMI exhibited better storage stability at 4 and 25°C. Inoculation of the SCMI in biotrickling filters (BTFs) could effectively shorten the start-up period and enhance the removal performance. Microbial analysis by Illumina MiSeq indicated that Alcaligenes sp. SY1 and P. putida S-1 might be dominant and persistent among the microbial communities of the BTF during the operation.

Photodegradation of methyl thioglycolate particles as a proxy for organosulphur containing droplets

Photochemical generation of elemental sulphur and sulphate at the gas–liquid interface by heterogeneous interaction with gaseous O₂and H₂O.

Methylsulfonylmethane: Applications and Safety of a Novel Dietary Supplement

Methylsulfonylmethane (MSM) has become a popular dietary supplement used for a variety of purposes, including its most common use as an anti-inflammatory agent. It has been well-investigated in animal models, as well as in human clinical trials and experiments. A variety of health-specific outcome measures are improved with MSM supplementation, including inflammation, joint/muscle pain, oxidative stress, and antioxidant capacity. Initial evidence is available regarding the dose of MSM needed to provide benefit, although additional work is underway to determine the precise dose and time course of treatment needed to provide optimal benefits. As a Generally Recognized As Safe (GRAS) approved substance, MSM is well-tolerated by most individuals at dosages of up to four grams daily, with few known and mild side effects. This review provides an overview of MSM, with details regarding its common uses and applications as a dietary supplement, as well as its safety for consumption.