Conversion characteristics and mechanism analysis of gaseous dichloromethane degraded by a VUV light in different reaction media

A cautionary tale of basic azo photoswitching in dichloromethane finally explained

Many studies of azobenzene photoswitches are carried out in polar aprotic solvents as a first principles characterization of thermal isomerization. Among the most convenient polar aprotic solvents are chlorinated hydrocarbons, such as DCM. However, studies of azobenzene thermal isomerization in such solvents have led to spurious, inconclusive, and irreproducible results, even when scrupulously cleaned and dried, a phenomenon not well understood. We present the results of a comprehensive investigation into the root cause of this problem. We explain how irradiation of an azopyridine photoswitch with UV in DCM acts not just as a trigger for photoisomerization, but protonation of the pyridine moiety through photodecomposition of the solvent. Protonation markedly accelerates the thermal isomerization rate, and DFT calculations demonstrate that the singlet-triplet rotation mechanism assumed for many azo photoswitches is surprisingly abolished. This study implies exploitative advantages of photolytically-generated protons and finally explains the warning against using chlorinated solvent with UV irradiation in isomerization experiments.

Removal of gaseous volatile organic compounds via vacuum ultraviolet photodegradation: Review and prospect

Volatile organic compounds (VOCs) have attracted much attention for decades as they are the precursors of photochemical smog and are harmful to the environment and human health. Vacuum ultraviolet (VUV) photodegradation is a simple and effective method to decompose VOCs (ranging from tens to hundreds of ppmV) without additional oxidants or catalysts in the air at atmospheric pressure. In this paper, we review the research progress of VOCs removal via VUV photodegradation. The fundamentals are outlined and the key operation factors for VOCs degradation, such as humidity, oxygen content, VOCs initial concentration, light intensity, and flow rate, are discussed. VUV photodegradation of VOCs mixture is elucidated. The application of VUV photodegradation in combination with ozone-assisted catalytic oxidation (OZCO) and photocatalytic oxidation (PCO) systems, and as the pre-treatment technique for biological purification are illustrated. Based on the summary, we propose the challenges of VUV photodegradation and perspectives for its future development.

A review of volatile organic compounds (VOCs) degradation by vacuum ultraviolet (VUV) catalytic oxidation

Volatile organic compounds (VOCs), one of the most important gaseous air pollutants, are getting more and more attention, and a lot of technologies have been studied and applied to eliminate VOCs emissions. Advanced oxidation processes (AOPs) are considered as one of the most promising techniques used for the degradation of VOCs. Vacuum ultraviolet (VUV) catalytic oxidation system is a typical composite AOPs system involving several processes such as VUV photodegradation, photocatalytic oxidation (PCO), ozone catalytic oxidation (OZCO) and their combinations. VUV based catalytic oxidation processes have been intensively studied for degrading VOCs. This review summarizes the recent studies on the use of VUV catalytic oxidation for degrading VOCs. All the processes involved in VUV catalytic oxidation and their combinations have been reviewed. Studies of VOCs degradation by VUV catalytic oxidation can be generally divided into two aspects: developments of catalysts and mechanistic studies. Principles of different processes, strategies of catalyst development and reaction mechanism are summarized in this review. Two directions of prospective future work were also proposed.

Kinetic Stabilization of Blue-Emissive Anthracenes: Phenylene Bridging Works Best

In attempts at kinetically stabilizing blue-emissive anthracenes, a series of 9,10-diaryl substituted derivatives were tested for their photochemical and photooxidative persistence. A major breakthrough in light fastness comes from a new bis-meta-terphenylyl substituted anthracene which is much superior to industrially relevant 9,10-biarylated anthracenes. The key issue is the steric shielding of the anthracene core. Further, intramolecular ring closure via Yamamoto coupling furnished a doubly bridged anthracene as a "self-encapsulated" sky-blue emitter which is most resistant to photodegradation. The improved stabilization was corroborated by time-resolved irradiation experiments and rationalized by X-ray crystallography.

Efficient mineralization of gaseous benzyl chloride by VUV/UV photodegradation in humid air

VUV/UV photodegradation technology, which is free of catalysts or oxidants, has been regarded as an efficient method to decompose gaseous VOCs. However, the mineralization of gaseous VOCs by VUV/UV photodegradation has seldom been discussed systematically. In this work, the mineralization of benzyl chloride in humid air is comprehensively investigated and the potential contributors in the system (i.e., light wavelength, O₂ and H₂O) are discussed. As a result, more than 95.0% benzyl chloride is mineralized at 40 min in humid air with 80% relative humidity (RH) despite its initial concentrations (i.e., ranging from 4 to 20 ppm). It is found that both 185-nm VUV light and H₂O significant contribute to the efficient mineralization of benzyl chloride in humid air, while O₂ only has a limited effect to the efficient mineralization of benzyl chloride in humid air. The introduction of H₂O into the VUV/UV photodegradation can reduce the emission of ozone obviously. These findings are significant inspiration to application of the VUV/UV photodegradation technology on the treatment of gaseous VOCs in the actual air atmosphere.

Insights into efficient removal of gaseous p-xylene using cerium-doped ZnO nanoparticles through photocatalytic oxidation

Novel Ce-doped ZnO exhibited excellent photocatalytic activity for decomposing VOCs under VUV light.

A review and perspective of recent research in biological treatment applied in removal of chlorinated volatile organic compounds from waste air

Chlorinated volatile organic compounds (Cl-VOCs) waste air is a kind of typical recalcitrant organic compounds, which poses a great threat to the ecological environment and human health. At present, the biotechnology is considered as a potential strategy for the Cl-VOCs removal due to the advantages of low energy consumption and less possibility of secondary pollution. This work summarizes the recent researches on strains, bioreactors and technology integration. The dominant pure strains for biodegradation of Cl-VOCs are first outlined with a special focus on the co-metabolism of multi-components. It then summarizes two bioreactors (optimized airlift reactor (ALR) and two-phase partitioning bioreactor (TPPB)) and strategy (addition of surfactant) for improvement of biotrickling filter (BTF), which are benefit to achieve the mass transfer enhancement in the removal of hydrophobic Cl-VOCs from waste air. After that, the integration technologies, such as magnetic field (MF)-BTF, non-thermal plasma (NTP)/ultraviolet light (UV)-BTF, and microbial electrolytic cells (MEC), are elucidated, which provide opportunities for complete mineralization of Cl-VOCs in a more efficient, energy-saving and economical way. Finally, current challenges and a perspective of future research on biotechnology for Cl-VOCs removal are thoroughly discussed.

Investigation of reactive oxygen species produced by microwave electrodeless discharge lamp on oxidation of dimethyl sulfide

Microwave electrodeless discharge lamp (MEDL) has been regarded as a powerful light source of photoreaction. Four kinds of chemicals, nitrogen (N₂), oxygen (O₂), water (H₂O) and dimethyl sulfide (DMS), were used as molecular probes to explore the generation process of reactive oxygen species (ROS) and their photo-oxidation performances on the photodegradation of organic pollutants with application of an exterior MEDL system. ROS such as O (³P), O₃, O (¹D) and ¹O₂ were generated via irradiation of O₂ and H₂O except dry N₂ by MEDL. They were transformed to other ROS including ·OH and H₂O₂ with increase of relative humidity. The ROS productivity was inhibited evidently by humidity and ·OH became the major active species at high humidity. An optimal mineralization rate of 23.6% for DMS photodegradation was reached in dry air compared with 8.74% at high humidity, which indicated that O (¹D) and ¹O₂ were more powerful oxidants than O₃ and OH. The results showed that the higher mineralization rate of organic pollutants was obtained by increasing the generation efficiency of ROS of O (¹D) and ¹O₂. Furthermore, the results provided an alternative to develop intensification technology on photodegadation of organic pollutants with MEDL system and an optimal operation process including photocatalyst and humidity.

Coated mesh photocatalytic reactor for air treatment applications: comparative study of support materials

An experimental comparative study of different meshes as support materials for photocatalytic applications in gas phase is presented. The photocatalytic oxidation of dichloromethane in air was addressed employing different coated meshes in a laboratory-scale, continuous reactor. Two fiberglass meshes and a stainless steel mesh were studied regarding the catalyst load, adherence, and catalytic activity. Titanium dioxide photocatalyst was immobilized on the meshes by dip-coating cycles. Results indicate the feasibility of the dichloromethane elimination in the three cases. When the number of coating cycles was doubled, the achieved conversion levels were increased twofold for stainless steel and threefold for the fiberglass meshes. One of the fiberglass meshes (FG2) showed the highest reactivity per mass of catalyst and per catalytic surface area.

Dichloromethane removal and microbial variations in a combination of UV pretreatment and biotrickling filtration

Biofiltration of hydrophobic and/or recalcitrant volatile organic compounds in industry is currently limited. A laboratory-scale system integrating ultraviolet (UV) photodegradation and a biotrickling filter (BTF) was developed to treat dichloromethane (DCM), and this was compared to BTF alone. A combined UV-BTF approach permitted faster biofilm formation and greater removal than BTF. DCM distribution and its photodegradation intermediates revealed that the lower filter of the UV-BTF contributed more to CO2 production; the upper filter assisted more with DCM removal. The UV-BTF kept secretion of extracellular polymeric substances at a normal level with an evenly distributed biomass. Pyrosequencing analysis showed that the dominant population in the combined biofilter was more diverse than that in BTF alone. Our data provide a foundation for understanding the effect of UV pretreatment on BTF performance and the microbial community.

Removal of dichloromethane from waste gas streams using a hybrid bubble column/biofilter bioreactor

The performance of a hybrid bubble column/biofilter (HBCB) bioreactor for the removal of dichloromethane (DCM) from waste gas streams was studied in continuous mode for several months. The HBCB bioreactor consisted of two compartments: bubble column bioreactor removing DCM from liquid phase and biofilter removing DCM from gas phase. Effect of inlet DCM concentration on the elimination capacity was examined in the DCM concentration range of 34-359 ppm with loading rates ranged from 2.2 to 22.8 g/m3.h and constant total empty bed retention time (EBRT) of 200 s. In the equal loading rates, the elimination capacity and removal efficiency of the biofilter were higher than the corresponding values of the bubble column bioreactor. The maximum elimination capacity of the HBCB bioreactor was determined to be 15.7 g/m3.h occurred in the highest loading rate of 22.8 g/m3.h with removal efficiency of 69%. The overall mineralization portion of the HBCB bioreactor was in the range of 72-79%. The mixed liquor acidic pH especially below 5.5 inhibited microbial activity and decreased the elimination capacity. Inhibitory effect of high ionic strength was initiated in the mixed liquor electrical conductivity of 12.2 mS/cm. This study indicated that the HBCB bioreactor could benefit from advantages of both bubble column and biofilter reactors and could remove DCM from waste gas streams in a better manner.