Enrichment, isolation and identification of sulfur-oxidizing bacteria from sulfide removing bioreactor

Multi-approach assessment of groundwater biogeochemistry: Implications for the site characterization of prospective spent nuclear fuel repository sites

The disposal of spent nuclear fuel in deep subsurface repositories using multi-barrier systems is considered to be the most promising method for preventing radionuclide leakage. However, the stability of the barriers can be affected by the activities of diverse microbes in subsurface environments. Therefore, this study investigated groundwater geochemistry and microbial populations, activities, and community structures at three potential spent nuclear fuel repository construction sites. The microbial analysis involved a multi-approach including both culture-dependent, culture-independent, and sequence-based methods for a comprehensive understanding of groundwater biogeochemistry. The results from all three sites showed that geochemical properties were closely related to microbial population and activities. Total number of cells estimates were strongly correlated to high dissolved organic carbon; while the ratio of adenosine-triphosphate:total number of cells indicated substantial activities of sulfate reducing bacteria. The 16S rRNA gene sequencing revealed that the microbial communities differed across the three sites, with each featuring microbes performing distinctive functions. In addition, our multi-approach provided some intriguing findings: a site with a low relative abundance of sulfate reducing bacteria based on the 16S rRNA gene sequencing showed high populations during most probable number incubation, implying that despite their low abundance, sulfate reducing bacteria still played an important role in sulfate reduction within the groundwater. Moreover, a redundancy analysis indicated a significant correlation between uranium concentrations and microbial community compositions, which suggests a potential impact of uranium on microbial community. These findings together highlight the importance of multi-methodological assessments in better characterizing groundwater biogeochemical properties for the selection of potential spent nuclear fuel disposal sites.

Establishing an efficient membrane bioreactor for simultaneous pollutant removal and purple bacteria production under salinity stress

Recovering resources from wastewater to alleviate the energy crisis has become the prevailing trend of technological development. Purple phototrophic bacteria (PPB), a group of fast-growing microbes, have been widely noticed for their potential in producing value-added products from waste streams. However, saline contents in these waste streams, such as food processing wastewater pose a big challenge, which not only restrain the pollutant removal efficiency, but also hinder the growth of functional microbes. To overcome this, a photo anaerobic membrane bioreactor cultivating PPB (PPB-MBR) was constructed and its performance upon long-term salinity stress was investigated. PPB-MBR achieved desirable pollutants removal performance with the average COD and NH4+ removal efficiency being 87% (±8%, n = 87) and 89% (±10%, n = 87), respectively during long-term exposure to salinity stress of 1-80 g NaCl L-1. PPB were predominant during the entire operation period of 87 days (60%-80%), obtaining maximum biomass yield of 0.67 g biomass g-1 CODremoved and protein productivity of 0.18 g L-1 d-1 at the salinity level of 20 g NaCl L-1 and 60 g NaCl L-1, respectively. The sum of value-added products in proportion to the biomass reached 58% at maximum at the salinity level of 60 g NaCl L-1 with protein, pigments and trehalose contributing to 44%, 8.7%, and 5%, respectively. Based on economic analysis, the most cost-saving scenario treating food processing wastewater was revealed at salinity level of around 20 g NaCl L-1. However, more optimization tools are needed to boost the production efficiency so that the profit from value-added products can outweigh the additional cost by excess salinity in the future implication.

A biological strategy for sulfide control in sewers: Removing sulfide by sulfur-oxidizing bacteria

Sulfide produced from sewers is considered one of the dominant threats to public health and sewer lifespan due to its toxicity and corrosiveness. In this study, we developed an environmentally friendly strategy for gaseous sulfide control by enriching indigenous sulfur-oxidizing bacteria (SOB) from sewer sediment. Ceramics acted as bio-carriers for immobilizing SOB for practical use in a lab-scale sewer reactor. 16 S rRNA gene sequences revealed that the SOB consortium was successfully enriched, with Thiobacillus, Pseudomonas, and Alcaligenes occupying a dominant abundance of 64.7% in the microbial community. Metabolic pathway analysis in different acclimatization stages indicates that microorganisms could convert thiosulfate and sulfide into elemental sulfur after enrichment and immobilization. A continuous experiment in lab-scale sewer reactors confirmed an efficient result for sulfide removal with hydrogen sulfide reduction of 43.9% and 85.1% under high-sulfur load and low-sulfur load conditions, respectively. This study shed light on the promising application for sewer sulfide control by biological sulfur oxidation strategy.

Identification of sulfur-oxidizing bacteria from fishponds and their performance to remove hydrogen sulfide under aquarium conditions

Hydrogen sulfide is a highly toxic gas that causes many economic losses in aquaculture ponds. The application of sulfur-oxidizing bacteria (SOB) to remove hydrogen sulfide is an eco-friendly approach. This study aimed to isolate and identify the most efficient SOBs from the sediment of warm-water fish farms. Enrichment and isolation were performed in three different culture media (Starkey, Postgate, and H-3) based on both mineral and organic carbon. Overall, 27 isolates (14 autotrophic and 13 heterotrophic isolates) were purified based on colony and cell morphology differences. Initial screening was performed based on pH decrease. For final screening, the isolates were assessed based on their efficacy in thiosulfate oxidation and the sulfate production on Starkey liquid medium. Among isolated strains, 3 strains of Iran 2 (FH-13), Iran 3 (FH-21), and Iran 1 (FH-14) that belonged to Thiobacillus thioparus species (identified by 16s rRNA) showed the highest ability in thiosulfate oxidation (413.21, 1362.50, and 4188.03 mg/L for 14 days) and the highest sulfate production (3350, 2075, and 1600 mg/L). In the final phase, the performance of these strains under aquarium conditions showed that Iran 1 and Iran 2 had the highest ability in sulfur oxidation. In conclusion, Iran 1 and 2 strains can be used as effective SOB to remove hydrogen sulfide in fish farms. It is very important to evaluate strains in an appropriate strategy using a combination of different criteria to ensure optimal performance of SOB in farm conditions.

Development of microbial enrichments for simultaneous removal of sulfur and nitrogenous metabolites in saline water aquaculture

AIM

The aim of the study was to develop microbial enrichments from the nitrifying microbial consortia and the environment for simultaneous removal of ammonia, nitrate, and sulfide in aquaculture systems at varied salinities.

METHODS AND RESULTS

Sulfur and nitrogen metabolites are the major factors affecting the farmed aquatic animal species and deteriorate the receiving environments causing ecological damage. The present study reports the development of microbial enrichments from the nitrifying microbial consortia and the environment. The enrichments used thiosulfate or thiocyanate as an energy source and simultaneously removed sulfur, ammonia, and nitrite in spiked medium (125 mg/l ammonia; 145 mg/l nitrite). Further, the microbes in the enrichments could grow up to 30 g/l salinity. Metagenomic studies revealed limited microbial diversity suggesting the enrichment of highly specialized taxa, and co-occurrence network analysis showed the formation of three micro-niches with multiple interactions at different taxonomic levels.

CONCLUSIONS

The ability of the enrichments to grow in both organic and inorganic medium and simultaneous removal of sulfide, ammonia, and nitrite under varied salinities suggests their potential application in sulfur, nitrogen, and organic matter-rich aquaculture pond environments and other industrial effluents.

Evaluation of a synbiotic formulation for water remediation in a shrimp pond

In recent years, the use of probiotic bacteria has attracted the interest of the marine shrimp farming industry. However, there are certain limitations pertaining to the practical application of many commercially available probiotics. Here, a thoroughly screened optimal consortium of three indigenous sulfur probiotics was tested for antibiotic susceptibility and was found to be safe, with each culture being sensitive to all the tested antibiotics. Further, de-potash vinasse (DPV), an environmental hazard, was tested for its prebiotic potential, and its 1% (w/v) concentration was found to be effective for long-term viability (> 66 days) of the probiotic cultures and safe for Artemia. The synbiotic formulation was tested first in a lab-scale microcosm setup successfully and subsequently tried on a shrimp farm; it was observed that the product was congruent to the efficiency of a commercial probiotic regarding almost all physicochemical parameters, sulfide, nitrate-N, nitrite-N, phytoplankton sustenance, Pseudomonas count, coliform count, and heterotrophic count. In addition, it was significantly efficient in maintaining pH, reducing ammonia-N and phosphate-P, Vibrio and Aeromonas count, and a net increase in the yield of shrimp biomass by 625 kg, thus proving to be a better alternative than one of the already available remediation methods.

Emission of odor pollutants and variation in microbial community during the initial decomposition stage of municipal biowaste

Odor pollution often occurs in the initial decomposition stage of municipal biowaste, including throwing/collection and transportation. However, this aspect of odor impact from municipal biowaste has not been well studied. In this study, a practical dustbin (120 L) equipped with flux chamber and filled with three types of municipal biowaste was used to simulate garbage storage conditions. The result indicated that the emission rate of odor pollutants for uncooked food waste (UFW) represented a nearly linear growth trend, reaching the maximum (3963 ± 149 μg kg^-1 DM h^-1) at 72 h. Cooked food waste (CFW) increased rapidly from 8 h to 24 h, and then remain fluctuated, reached the maximum (2026 ± 77 μg kg^-1 DM h^-1) at 72 h. Comparatively, household kitchen waste (HKW) reached the maximum emission rate (10,396 ± 363 μg kg^-1 DM h^-1) at 16 h. Sulfide and aldehydes ketones were identified as dominant odor contributor to UFW and CFW, respectively. While aldehydes ketones and sulfides were both dominant odor contributor to HKW. Moreover, the microbial diversity analysis suggests that Acinetobacter was the dominant genus in UFW, and Lactobacillus was the dominant genus in CFW and HKW. In addition, it was evident that each odorous pollutant was significantly associated with two or more bacterial genera, and most bacterial genera such as Acinetobacter, were also significantly associated with multiple odorous pollutants. The variation of odorants composition kept consistent with microbial composition. The present study could provide essential evidence for a comprehensive understanding of odorant generation in the initial decomposition stage of municipal biowaste. It could contribute to setting out strategies for odor control and abatement in municipal biowaste management systems.

Unravelling microbial drivers of the sulfate-reduction process inside landfill using metagenomics

Hydrogen sulfide (H₂S) is one of the common landfill odor. This research demonstrates that the sulfate transformation behavior is significantly enhanced during the landfill process, accompanied by a shift in microbial structure. The relative abundance of dissimilatory sulfate reduction (DSR) and thiosulfate oxidation by SOX (sulfur-oxidation) complex gradually decreases through the landfill processes while the assimilatory sulfate reduction (ASR) demonstrates the opposite behavior. The major module for landfill sulfate reduction is ASR, accounting for 31.72% ± 2.84% of sulfate metabolism. Based on the functional genes for the sulfate pathway, the drivers for sulfate biotransformation in landfills were determined and further identified their contribution in the sulfate metabolism during landfill processes. Pseudomonas, Methylocaldum, Bacillus, Methylocystis and Hyphomicrobium were the top 5 contributors for ASR pathway, and only one genus Pseudomonas was found for DSR pathway. Among the 26 high-quality metagenome-assembled genomes of sulfate functional species, 24 were considered novel species for sulfuric metabolism. Overall, this study provides unique insight into the sulfate transformation process related to the H₂S odor control in landfill management.

Roles, mechanism of action, and potential applications of sulfur-oxidizing bacteria for environmental bioremediation

Sulfur (S) is a crucial component in the environment and living organisms. This work is the first attempt to provide an overview and critical discussion on the roles, mechanisms, and environmental applications of sulfur-oxidizing bacteria (SOB). The findings reveal that key enzymes of SOB embarked on oxidation of sulfide, sulfite, thiosulfate, and elemental S. Conversion of reduced S compounds was oxidatively catalyzed by various enzymes (e.g. sulfide: quinone oxidoreductase, flavocytochrome c-sulfide dehydrogenase, dissimilatory sulfite reductase, heterodisulfide reductase-like proteins). Environmental applications of SOB discussed include detoxifying hydrogen sulfide, soil bioremediation, and wastewater treatment. SOB producing S⁰ engaged in biological S soil amendments (e.g. saline-alkali soil remediation, the oxidation of sulfide-bearing minerals). Biotreatment of H₂S using SOB occurred under both aerobic and anaerobic conditions. Sulfide, nitrate, and sulfamethoxazole were removed through SOB suspension cultures and S⁰-based carriers. Finally, this work presented future perspectives on SOB development, including S⁰ recovery, SOB enrichment, field measurement and identification of sulfur compounds, and the development of mathematical simulation.

A novel intra- and extracellular distribution pattern of elemental sulfur in Pseudomonas sp. C27-driven denitrifying sulfide removal process

Pseudomonas sp. C27 can achieve the conversion of toxic sulfide to economical elemental sulfur (S⁰) with various electron acceptors. In this study the distribution pattern of S⁰ produced by C27 in denitrifying sulfide removal (DSR) process was explored. The SEM observation identified that the particle size of the biogenic S⁰ was at micron level. Strikingly, a novel distribution pattern of S⁰ was revealed that the produced S⁰ was not directly secreted extracellularly, but be stored temporarily in the cell interior. Pyrolysis at 65 °C for 20 min were recommended prior to S⁰ recovery, which could maximize the separation of extracellular polymeric substances (EPS) from C27. Furthermore, the effects of N/S molar ratio, initial sulfide concentration, and micro-oxygen condition were investigated to improve the production of S⁰ by C27. The highest S⁰ production was obtained at S/N of 3 and anaerobic condition seemed to favor the S⁰ production by C27. This study would provide a theoretical support for highly efficient sulfide removal as well as S⁰ recovery in sulfide-laden wastewater treatment.

Microbial sulfite oxidation coupled to nitrate reduction in makeup water for oil production

Bisulfite is used as an oxygen scavenger in waters used for oil production to prevent oxygen-mediated pipeline corrosion. Analysis of nitrate-containing water injected with ammonium bisulfite indicated increased concentrations of ammonium, sulfate and nitrite. To understand the microbial process causing these changes, water samples were used in enrichments with bisulfite and nitrate. Oxidation of bisulfite, reduction of nitrate, change in microbial community composition and corrosivity of bisulfite were determined. The results indicated that the microbial community was dominated by Sulfuricurvum, a sulfite-oxidizing nitrate-reducing bacterium (StONRB). Plating of the enriched StONRB culture yielded the bacterial isolate Sulfuricurvum sp. TK005, which coupled bisulfite oxidation with nitrate reduction to form sulfate and nitrite. Bisulfite also induced chemical corrosion of carbon steel at a rate of 0.28 ± 0.18 mm yr^-1. Bisulfite and the generated sulfate could serve as electron acceptors for sulfate-reducing microorganisms (SRM), which reduce sulfate and bisulfite to sulfide. Nitrate is frequently injected to injection waters to contain the activity of SRM in oil reservoirs. This study suggests an alternative bisulfite injection procedure: Injection of nitrate after the chemical reaction of bisulfite with oxygen is completed. This could maintain the oxygen scavenger function of bisulfite and SRM inhibitory activity of nitrate.

Application of activated sludge for odor control in wastewater treatment plants: Approaches, advances and outlooks

Odors from wastewater treatment plants (WWTPs) have attracted extensive attention and stringent environmental standards are more widely adopted to reduce odor emissions. Biological odor treatment methods have broader applications than the physical and chemical counterparts as they are environment-friendly, cost-effective and generate low secondary wastes. The aqueous activated sludge (AS) processes are among the most promising approaches for the prevention or end-of-pipe removal of odor emissions and have the potential to simultaneously treat odor and wastewater. However, AS deodorization biotechnologies in WWTPs still need to be further systematically summarized and categorized while in-depth discussions on the characteristics and underlying mechanisms of AS deodorization process are still lacking. Recently, considerable studies have been reported to elucidate the microbial metabolisms in odor control and wastewater treatment. This paper reviews the fundamentals, characteristics, advances and field experiences of three AS biotechnologies for odor treatment in WWTPs, i.e., AS recycling, microaeration in AS digester and AS diffusion. The underlying deodorization mechanisms of typical odors have been revealed through the summary of recent advances on multi-element conversions, metabolic interactions of bacteria, microscopic characterization and identification of functional microorganisms. Future research aspects to advance the emerging deodorization AS process, such as deodorization mechanisms, simultaneous odor and water treatment, synergistic treatment with other air emissions, are discussed.

Removal of H2S by vermicompost biofilter and analysis on bacterial community

The vermicompost collected from dewatered domestic sludge as packing material in biofilter was investigated for hydrogen sulfide (H2S) removal. No nutrients or microbial inoculation was added throughout the experiment. The corresponding bacterial community characteristics in the vermicompost biofilter of different spatial levels were evaluated by Miseq high-throughput sequencing technique. The results showed that the vermicompost biofilter performed well during operation. The H2S removal efficiency reached nearly 100% under condition of the inlet concentration <350 mg m−3 and 0.25−0.35 m3 h−1 gas flow rate. The maximum elimination capacity of 20.2 g m−3 h−1 was observed at a flow rate of 0.35 m3 h−1. Furthermore, the amounts of biodegraded products and pH varied accordingly. In addition, the results from high-throughput sequencing revealed pronouncedly spatial variation of the vermicompost, and the Rhodanobacter, Halothiobacillus, Mizugakiibacter as well as Thiobacillus, which can play an important role in removing H2S, were predominant in the final vermicompost. These results imply that the vermicompost with diverse microbial communities has a good potential for eliminating H2S.

Malodorous gases production from food wastes decomposition by indigenous microorganisms

Volatile organic compounds (VOCs) produced during the degradation of food wastes may harm to the health of people and create annoyance in adjacent communities. In this work, the VOCs emitted from the decomposition food wastes including fruit, meat and vegetable, and their microbial communities were measured in three individual 57-L reactors for 61 days. Total of 232.8, 373.5, and 191.1 μg·kg^-1·h^-1 VOCs with oxygenated VOCs (57.6%), volatile organic sulfur compounds (VOSCs, 58.6%) and VOSCs (54.9%) as the main group were detected during fruit, meat and vegetable fermentation, respectively. 2-Butanone (55.1%) and ethyl acetate (13.8%) were the two most abundant VOCs from fruit wastes, while dimethyl sulfide (68.0 and 26.6%) and dimethyl disulfide (89.2 and 10.1%) were in vegetable and meat wastes. The predominant Firmicutes represented 93.0-99.9% of the bacterial communities of meat decomposition, while Firmicutes and Proteobacteria were the dominant phyla throughout the fruit digestion process. Proteobacteria (16.9%-83.6%) was the dominant phylum in vegetable wastes, followed by Bacteroidetes, Firmicutes, and Actinobacteria. Malodorous VOCs emissions were highly affected by microbial activity, the abundant Weissella, Leuconostoc and Enterobacteriaceae in vegetable wastes showed correlation with carbon disulfide and dimethyl sulfide, while dominant Peptococcus, Bacteroides, Lactobacillales and Peptoniphilus in meat wastes was related to dimethyl disulfide. Overall, significant differences and correlation between VOCs emission profiles and bacterial communities among different food wastes decomposition were observed. These data contribute to a more comprehensive understanding the relationship between microbial community dynamics and malodorous VOCs emission.

Airlift bioreactor system for simultaneous removal of hydrogen sulfide and ammonia from synthetic and actual waste gases

The effectiveness of an airlift reactor system in simultaneously removing hydrogen sulfide (H₂S) and ammonia (NH₃) from synthetic and actual waste gases was investigated. The effects of various parameters, including the ratio of inoculum dilution, the gas concentration, the gas retention time, catalyst addition, the bubble size, and light intensity, on H₂S and NH₃ removal were investigated. The results revealed that optimal gas removal could be achieved by employing an activated inoculum, using a small bubble stone, applying reinforced fluorescent light, adding Fe₂O₃ catalysts, and applying a gas retention time of 20 s. The shock loading did not substantially affect the removal efficiency of the airlift bioreactor. Moreover, more than 98.5% of H₂S and 99.6% of NH₃ were removed in treating actual waste gases. Fifteen bands or species were observed in a profile from denaturing gradient gel electrophoresis during waste gas treatment. Phylogenetic analysis revealed the phylum Proteobacteria to be predominant. Six bacterial strains were consistently present during the entire operating period; however, only Rhodobacter capsulatus, Rhodopseudomonas palustris, and Arthrobacter oxydans were relatively abundant in the system. The photosynthetic bacteria R. capsulatus and R. palustris were responsible for H₂S oxidation, especially when the reinforced fluorescent light was used. The heterotrophic nitrifier A. oxydans was responsible for NH₃ oxidation. To our knowledge, this is the first report on simultaneous H₂S and NH₃ removal using an airlift bioreactor system. It clearly demonstrates the effectiveness of the system in treating actual waste gases containing H₂S and NH₃.

In-depth characterization of bacterial and archaeal communities present in the abandoned Kettara pyrrhotite mine tailings (Morocco)

In Morocco, pollution caused by closed mines continues to be a serious threat to the environment, like the generation of acid mine drainage. Mine drainage is produced by environmental and microbial oxidation of sulfur minerals originating from mine wastes. The fundamental role of microbial communities is well known, like implication of Fe-oxidizing and to a lesser extent S-oxidizing microorganism in bioleaching. However, the structure of the microbial communities varies a lot from one site to another, like diversity depends on many factors such as mineralogy, concentration of metals and metalloids or pH, etc. In this study, prokaryotic communities in the pyrrhotite-rich tailings of Kettara mine were characterized using the Illumina sequencing. In-depth phylogenetic analysis revealed a total of 12 phyla of bacteria and 1 phyla of Archaea. The majority of sequences belonged to the phylum of Proteobacteria and Firmicutes with a predominance of Bacillus, Pseudomonas or Corynebacterium genera. Many microbial populations are implicated in the iron, sulfur and arsenic cycles, like Acidiferrobacter, Leptospirillum, or Alicyclobacillus in Fe; Acidiferrobacter and Sulfobacillus in S; and Bacillus or Pseudomonas in As. This is one of the first description of prokaryotic communities in pyrrhotite-rich mine tailings using high-throughput sequencing.

Phytoextraction, phytotransformation and rhizodegradation of ibuprofen associated with Typha angustifolia in a horizontal subsurface flow constructed wetland

Widespread occurrence of trace pharmaceutical residues in aquatic environments is of great concerns due to the potential chronic toxicity of certain pharmaceuticals including ibuprofen on aquatic organisms even at environmental levels. In this study, the phytoextraction, phytotransformation and rhizodegradation of ibuprofen associated with Typha angustifolia were investigated in a horizontal subsurface flow constructed wetland system. The experimental wetland system consisted of a planted bed with Typha angustifolia and an unplanted bed (control) to treat ibuprofen-loaded wastewater (∼107.2 μg L(-1)). Over a period of 342 days, ibuprofen was accumulated in leaf sheath and lamina tissues at a mean concentration of 160.7 ng g(-1), indicating the occurrence of the phytoextraction of ibuprofen. Root-uptake ibuprofen was partially transformed to ibuprofen carboxylic acid, 2-hydroxy ibuprofen and 1-hydroxy ibuprofen which were found to be 1374.9, 235.6 and 301.5 ng g(-1) in the sheath, respectively, while they were 1051.1, 693.6 and 178.7 ng g(-1) in the lamina. The findings from pyrosequencing analysis of the rhizosphere bacteria suggest that the Dechloromonas sp., the Clostridium sp. (e.g. Clostridium saccharobutylicum), the order Sphingobacteriales, and the Cytophaga sp. in the order Cytophagales were most probably responsible for the rhizodegradation of ibuprofen.

Enrichment and immobilization of sulfide removal microbiota applied for environmental biological remediation of aquaculture area

To remove sulfide in the deteriorating aquaculture sediment and water, sulfide-oxidizing microbiota was enriched from Jiaozhou Bay, China, by using sulfide-rich medium. Composition and structure of microbial communities in the enrichments were investigated by 16S rDNA molecular biotechniques. Results showed that microbial community structure continuously shifted and the abundance of sulfate reducing bacteria, i.e., Desulfobacterium, Desulfococcus and Desulfobacca apparently declined. Several halophile genera, Vibrio, Marinobacter, Pseudomonas, Prochlorococcus, Pediococcus and Thiobacillus predominated finally in the microbiota. The enriched microbiota was capable of removing a maximum of 1000 mg/L sulfide within 12 h with 10% inoculum at pH 7.0, 20-30 °C. After immobilized, the microbiota presented excellent resistance to impact and could completely remove 600 mg/L sulfide in 12 h. Moreover, the immobilized microbiota recovered well even recycled for five times. In conclusion, the immobilized sulfide-removing microbiota showed a quite promising application for biological restoring of sulfide-rich aquaculture environment.

Metagenomic analysis of a desulphurisation system used to treat biogas from vinasse methanisation

We investigated the response of microbial community to changes in H2S loading rate in a microaerated desulphurisation system treating biogas from vinasse methanisation. H2S removal efficiency was high, and both COD and DO seemed to be important parameters to biomass activity. DGGE analysis retrieved sequences of sulphide-oxidising bacteria (SOB), such as Thioalkalimicrobium sp. Deep sequencing analysis revealed that the microbial community was complex and remained constant throughout the experiment. Most sequences belonged to Firmicutes and Proteobacteria, and, to a lesser extent, Bacteroidetes, Chloroflexi, and Synergistetes. Despite the high sulphide removal efficiency, the abundance of the taxa of SOB was low, and was negatively affected by the high sulphide loading rate.

Regeneration of elemental sulfur in a simultaneous sulfide and nitrate removal reactor under different dissolved oxygen conditions

A continuous reactor in microaerobic conditions was adopted for sulfide-oxidizing, nitrate-reducing and elemental sulfur (S(0)) regenerating, simultaneously. The results showed that appropriate dissolved oxygen (DO) enhanced S(0) regeneration efficiency, sulfide oxidation efficiency, and nitrate reduction efficiency. When the DO concentration was 0.1-0.3 mg L(-1), the microaerobic bioreactor simultaneously converted 8.16 kg-Sm(-3)d(-1) of sulfide to S(0) and 2.48 kg-Nm(-3)d(-1) of nitrate to nitrogen with the sulfide and nitrate removal efficiency of 100% and 90% respectively. Compared with anaerobic sulfide and nitrate removal process previously reported, the loading sulfide was higher and more S(0) was generated during the operation in microaerobic reactor. Analysis using the 16S rDNA gene clone library revealed that Azoarcus, Thauera, Paracoccus, Sulfurospirillum, Arcobacter and Clostridium were the dominant microorganisms in the sulfide and nitrate removal system.