Improvement of production of lipopeptide antibiotic iturin A using fish protein

Process optimized for production of iturin A in biofilm reactor by Bacillus velezensis ND

In this research, to provide an optimal growth medium for the production of iturin A, the concentrations of key amino acid precursors were optimized in shake flask cultures using the response surface method. The optimized medium were applied in a biofilm reactor for batch fermentation, resulting in enhanced production of iturin A. On this basis, a step-wise pH control strategy and a combined step-wise pH and temperature control strategy were introduced to further improve the production of iturin A. Finally, the fed-batch fermentation was performed based on combined step-wise pH and temperature control. The titer and productivity of iturin A reached 7.86 ± 0.23 g/L and 65.50 ± 1.92 mg/L/h, respectively, which were 37.65 and 65.20% higher than that before process optimization.

Iturin: A Promising Cyclic Lipopeptide with Diverse Applications

This comprehensive review examines iturin, a cyclic lipopeptide originating from Bacillus subtilis and related bacteria. These compounds are structurally diverse and possess potent inhibitory effects against plant disease-causing bacteria and fungi. Notably, Iturin A exhibits strong antifungal properties and low toxicity, making it valuable for bio-pesticides and mycosis treatment. Emerging research reveals additional capabilities, including anticancer and hemolytic features. Iturin finds applications across industries. In food, iturin as a biosurfactant serves beyond surface tension reduction, enhancing emulsions and texture. Biosurfactants are significant in soil remediation, agriculture, wound healing, and sustainability. They also show promise in Microbial Enhanced Oil Recovery (MEOR) in the petroleum industry. The pharmaceutical and cosmetic industries recognize iturin's diverse properties, such as antibacterial, antifungal, antiviral, anticancer, and anti-obesity effects. Cosmetic applications span emulsification, anti-wrinkle, and antibacterial use. Understanding iturin's structure, synthesis, and applications gains importance as biosurfactant and lipopeptide research advances. This review focuses on emphasizing iturin's structural characteristics, production methods, biological effects, and applications across industries. It probes iturin's antibacterial, antifungal potential, antiviral efficacy, and cancer treatment capabilities. It explores diverse applications in food, petroleum, pharmaceuticals, and cosmetics, considering recent developments, challenges, and prospects.

Biosurfactants: Potential Agents for Controlling Cellular Communication, Motility, and Antagonism

Biosurfactants are surface-active molecules produced by microorganisms, either on the cell surface or secreted extracellularly. They form a thin film on the surface of microorganisms and help in their detachment or attachment to other cell surfaces. They are involved in regulating the motility of bacteria and quorum sensing. Here, we describe the various types of biosurfactants produced by microorganisms and their role in controlling motility, antagonism, virulence, and cellular communication.

Two Novel Bacillus Strains (subtilis and simplex Species) with Promising Potential for the Biocontrol of Zymoseptoria tritici, the Causal Agent of Septoria Tritici Blotch of Wheat

Two novel Algerian field-collected isolates were selected for their antifungal activity against Zymoseptoria tritici (teleomorph Mycosphaerella graminicola). The novel strains, termed Alg.24B1 and Alg.24B2, were identified as Bacillus subtilis and Bacillus simplex since their respective nucleotide sequences of the 16S rRNA gene were 100% and 99.93% identical to those of B. subtilis and B. simplex, respectively. The antifungal activities of Alg.24B1 and Alg.24B2 were evaluated by the well diffusion method and compared to those of other Bacillus species. The maximum activity was obtained after two days of confrontation of the bacterial strain supernatants with the fungus for Alg.24B1 and three days for Alg.24B2. Furthermore, the metabolites responsible for the antifungal activity of both strains were detected by the investigation of either gene presence (PCR) or molecule production (activity detection of lytic enzymes and HPLC detection of lipopeptides). Overall, this study showed that in addition to their ability to produce lytic enzymes (protease and β-glucanase), both strains coproduce three types of lipopeptides viz. surfactin, iturin, and fengycin. Thus, the biofungicide activity of both strains may be a result of a combination of different mechanisms. Therefore, they had a great potential to be used as biocontrol agents to effectively manage septoria tritici blotch of wheat (STB).

Simultaneous hydrolysis with lipase and fermentation of rapeseed cake for iturin A production by Bacillus amyloliquefaciens CX-20

BACKGROUND

Rapeseed cake (RSC), as the intermediate by-product of oil extraction from the seeds of Brassica napus, can be converted into rapeseed meal (RSM) by solvent extraction to remove oil. However, compared with RSM, RSC has been rarely used as a raw material for microbial fermentation, although both RSC and RSM are mainly composed of proteins, carbohydrates and minerals. In this study, we investigated the feasibility of using untreated low-cost RSC as nitrogen source to produce the valuable cyclic lipopeptide antibiotic iturin A using Bacillus amyloliquefaciens CX-20 in submerged fermentation. Especially, the effect of oil in RSC on iturin A production and the possibility of using lipases to improve the iturin A production were analyzed in batch fermentation.

RESULTS

The maximum production of iturin A was 0.82 g/L at the optimal initial RSC and glucose concentrations of 90 and 60 g/L, respectively. When RSC was substituted with RSM as nitrogen source based on equal protein content, the final concentration of iturin A was improved to 0.95 g/L. The production of iturin A was further increased by the addition of different lipase concentrations from 0.1 to 5 U/mL into the RSC medium for simultaneous hydrolysis and fermentation. At the optimal lipase concentration of 0.5 U/mL, the maximal production of iturin A reached 1.14 g/L, which was 38.15% higher than that without any lipase supplement. Although rapeseed oil and lipase were firstly shown to have negative effects on iturin A production, and the effect would be greater if the concentration of either was increased, their respective negative effects were reduced when used together.

CONCLUSIONS

Appropriate relative concentrations of lipase and rapeseed oil were demonstrated to support optimal iturin A production. And simultaneous hydrolysis with lipase and fermentation was an effective way to produce iturin A from RSC using B. amyloliquefaciens CX-20.

Improved Production of Two Anti-Candida Lipopeptide Homologues Co- Produced by the Wild-Type Bacillus subtilis RLID 12.1 under Optimized Conditions

BACKGROUND

Antifungal cyclic lipopeptides, bioactive metabolites produced by many species of the genus Bacillus, are promising alternatives to synthetic fungicides and antibiotics for the biocontrol of human pathogenic fungi. In a previous study, the co- production of five antifungal lipopeptides homologues (designated as AF1, AF2, AF3, AF4 and AF5) by the producer strain Bacillus subtilis RLID 12.1 using unoptimized medium was reported; though the two homologues AF3 and AF5 differed by 14 Da and in fatty acid chain length were found effective in antifungal action, the production/ yield rate of these two lipopeptides determined by High-Performance Liquid Chromatography was less in the unoptimized media.

METHODS

In this study, the production/yield enhancement of the two compounds AF3 and AF5 was specifically targeted. Following the statistical optimization (Plackett-Burman and Box-Behnken designs) of media formulation, temperature and growth conditions, the production of AF3 and AF5 was improved by about 25.8- and 7.4-folds, respectively under static conditions.

RESULTS

To boost the production of these two homologous lipopeptides in the optimized media, heat-inactivated Candida albicans cells were used as a supplement resulting in 34- and 14-fold increase of AF3 and AF5, respectively. Four clinical Candida auris isolates had AF3 and AF5 MICs (100 % inhibition) ranging between 4 and 16 μg/ml indicating the lipopeptide's clinical potential. To determine the in vitro pharmacodynamic potential of AF3 and AF5, time-kill assays were conducted which showed that AF3 (at 4X and 8X concentrations) at 48h exhibited mean log reductions of 2.31 and 3.14 CFU/ml of C. albicans SC 5314, respectively whereas AF5 at 8X concentration showed a mean log reduction of 2.14 CFU/ml.

CONCLUSION

With the increasing threat of multidrug-resistant yeasts and fungi, these antifungal lipopeptides produced by optimized method promise to aid in the development of novel antifungal that targets disease-causing fungi with improved efficacy.

Evaluation of Yield and Surface Tension-lowering Activity of Iturin A Produced by Bacillus subtilis RB14

Bacillus subtilis RB14 produces the lipopeptide antibiotic iturin A by submerged and biofilm fermentation. In this study, we optimized the conditions for iturin A production in a jar fermentor. The maximum yield of iturin A was 932 mg L^-1 after 120 h. The surface tension of water decreased from 72.0 to 39.0 mN m^-1 as the concentrations of C₁₄ iturin A increased, indicating that C₁₄ iturin A behaves as a surfactant in water. The critical micellar concentration obtained from the intersection of two fitted lines was 1.2 × 10^-4 M. Moreover, the surface tension of water decreased as the length of the alkyl chain of iturin A increased.

Effect of media and fermentation conditions on surfactin and iturin homologues produced by Bacillus natto NT-6: LC-MS analysis

Lipopeptides possess excellent broad spectrum antimicrobial activity. Different lipopeptides have their own unique chemical structures, properties and biological activities. Quantitative analysis of the lipopeptides iturin and surfactin and their homologues produced by Bacillus natto NT-6 subjected to different culture media, shaking speed of rotary shaker, and liquid and solid fermentation methods was conducted using LC-MS. For iturins, liquid-state fermentation in Landy medium at a shaking speed of 160 r min^-1 was the most suitable for maximal homologue production. Addition of 0.4% attapulgite powder increased production by 1.92-fold; activated carbon significantly reduced production. For surfactin homologues, solid-state fermentation in potato dextrose broth medium at shaking speed > 160 r min^-1 was the best. Addition of 0.4% attapulgite powder increased production by 1.96-fold; activated carbon had no effect. Thus it is clear that fermentation conditions can be manipulated to maximize iturin and surfactin production.