Separation and detection of the alpha- and beta-chains of hemoglobin of a single intact red blood cells using capillary electrophoresis/electrospray ionization time-of-flight mass spectrometry

Microfluidic device integrating single-cell extraction and electrical lysis for mass spectrometry detection of intracellular compounds

Analysis of cellular composition and metabolism at a single-cell resolution allows gaining more information about complex relationships of cells within tissues or whole living organisms by resolving the variance stemming from the cellular heterogeneity. Mass spectrometry (MS) is a perfect analytical tool satisfying the demanding requirements of detecting and identifying compounds present in such ultralow-volume samples of high chemical complexity. However, the method of sampling and sample ionization is crucial in obtaining relevant information. In this work, we present a microfluidic sampling platform that integrates single-cell extraction from MS-incompatible media with electrical cell lysis and nanoESI-MS analysis of human erythrocytes. Hemoglobin alpha and beta chains (300 amol/cell) were successfully identified in mass spectra of single-erythrocyte lysates.

Analysis of Hemoglobin Glycation Using Microfluidic CE-MS: A Rapid, Mass Spectrometry Compatible Method for Assessing Diabetes Management

Diabetes has become a significant health problem worldwide with the rate of diagnosis increasing rapidly in recent years. Measurement of glycated blood proteins, particularly glycated hemoglobin (HbA1c), is an important diagnostic tool used to detect and manage the condition in patients. Described here is a method using microfluidic capillary electrophoresis with mass spectrometry detection (CE-MS) to assess hemoglobin glycation in whole blood lysate. Using denaturing conditions, the hemoglobin (Hb) tetramer dissociates into the alpha and beta subunits (α- and β-Hb), which are then separated via CE directly coupled to MS detection. Nearly baseline resolution is achieved between α-Hb, β-Hb, and glycated β-Hb. A second glycated β-Hb isomer that is partially resolved from β-Hb is detected in extracted ion electropherograms for glycated β-Hb. Glycation on α-Hb is also detected in the α-Hb mass spectrum. Additional modifications to the β-Hb are detected, including acetylation and a +57 Da species that could be the addition of a glyoxal moiety. Patient blood samples were analyzed using the microfluidic CE-MS method and a clinically used immunoassay to measure HbA1c. The percentage of glycated α-Hb and β-Hb was calculated from the microfluidic CE-MS data using peak areas generated from extracted ion electropherograms. The values for glycated β-Hb were found to correlate well with the HbA1c levels derived in the clinic, giving a slope of 1.20 and an R(2) value of 0.99 on a correlation plot. Glycation of human serum albumin (HSA) can also be measured using this technique. It was observed that patients with elevated glycated Hb levels also had higher levels of HSA glycation. Interestingly, the sample with the highest HbA1c levels did not have the highest levels of glycated HSA. Because the lifetime of HSA is shorter than Hb, this could indicate a recent lapse in glycemic control for that patient. The ability to assess both Hb and HSA glycation has the potential to provide a more complete picture of a patient's glycemic control in the months leading up to blood collection. The results presented here demonstrate that the microfluidic CE-MS method is capable of rapidly assessing Hb and HSA glycation from low volumes of whole blood with minimal sample preparation and has the potential to provide more information in a single analysis step than current technologies.

Integrated microfluidic device for automated single cell analysis using electrophoretic separation and electrospray ionization mass spectrometry

A microfabricated fluidic device was developed for the automated real-time analysis of individual cells using capillary electrophoresis (CE) and electrospray ionization-mass spectrometry (ESI-MS). The microfluidic structure incorporates a means for rapid lysis of single cells within a free solution electrophoresis channel, where cellular constituents were separated, and an integrated electrospray emitter for ionization of separated components. The eluent was characterized using mass spectrometry. Human erythrocytes were used as a model system for this study. In this monolithically integrated device, cell lysis occurs at a channel intersection using a combination of rapid buffer exchange and an increase in electric field strength. An electroosmotic pump is incorporated at the end of the electrophoretic separation channel to direct eluent to the integrated electrospray emitter. The dissociated heme group and the alpha and beta subunits of hemoglobin from individual erythrocytes were detected as cells continuously flowed through the device. The average analysis throughput was approximately 12 cells per minute, demonstrating the potential of this method for high-throughput single cell analysis.

Single cell analytics: an overview

The research field of single cell analysis is rapidly expanding, driven by developments in flow cytometry, microscopy, lab-on-a-chip devices, and many other fields. The promises of these developments include deciphering cellular mechanisms and the quantification of cell-to-cell differences, ideally with spatio-temporal resolution. However, these promises are challenging as the analytical techniques have to cope with minute analyte amounts and concentrations. We formulate first these challenges and then present state-of-the-art analytical techniques available to investigate the different cellular hierarchies--from the genome to the phenome, i.e., the sum of all phenotypes.

Capillary electrophoresis–mass spectrometry for the analysis of intact proteins

Developments in the fields of protein chemistry, proteomics and biotechnology have increased the demand for suitable analytical techniques for the analysis of intact proteins. In 1989, capillary electrophoresis (CE) was combined with mass spectrometry (MS) for the first time and its potential usefulness for the analysis of intact (i.e. non-digested) proteins was shown. This article provides an overview of the applications of CE-MS within the field of intact protein analysis. The principles of the applied CE modes and ionization techniques used for CE-MS of intact proteins are shortly described. It is shown that separations are predominantly carried out by capillary zone electrophoresis and capillary isoelectric focusing, whereas electrospray ionization (ESI) and matrix-assisted laser desorption ionization (MALDI) are the most popular ionization techniques used for interfacing. The combination of CE with inductively coupled plasma (ICP) MS for the analysis of metalloproteins is also discussed. The various CE-MS combinations are systematically outlined and tables provide extensive overviews of the applications of each technique for intact protein analysis. Selected examples are given to illustrate the usefulness of the CE-MS techniques. Examples include protein isoform assignment, single cell analysis, metalloprotein characterization, proteomics and biomarker screening. Finally, chip-based electrophoresis combined with MS is shortly treated and some of its applications are described. It is concluded that CE-MS represents a powerful tool for the analysis of intact proteins yielding unique separations and information.

CE-based analysis of hemoglobin and its applications in clinical analysis

This review focuses on the developments and trends in CE including CIEF, CZE, MEKC, two-dimensional conjunction of CIEF-capillary gel electrophoresis, and MEKC-CZE on microfluidic devices coupled to different detection approaches, such as UV absorbance, LIF, MS, and chemiluminescence etc. for performing analysis of hemoglobin (Hb), also with an emphasis on its applications in clinical analysis. Analysis of human Hb is of important clinical sense for numerous hemoglobinopathies associated with the congenital defects and abnormal contents of Hb. The diversiform modes render CE a comprehensive primary clinical tool for Hb analysis, which is rapid, sensitive, high-resolution, and not labor-intensive.

Advances in the analysis of proteins and peptides by capillary electrophoresis with matrix-assisted laser desorption/ionization and electrospray-mass spectrometry detection

High throughput, outstanding certainty in peptide/protein identification, exceptional resolution, and quantitative information are essential pillars in proteome research. Capillary electrophoresis (CE) coupled to mass spectrometry (MS) has proven to meet these requirements. Soft ionization techniques, such as matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), have paved the way for the story of success of CE-MS in the analysis of biomolecules and both approaches are subject of discussion in this article. Meanwhile, CE-MS is far away from representing a homogeneous field. Therefore the review will cover a vast area including the coupling of different modes of CE (capillary zone electrophoresis, capillary isoelectric foscusing, capillary electrochromatography, micellar electrokinetic chromatography, nonaqueous capillary electrophoresis) to MS as well as on-line preconcentration techniques (transient capillary isotachophoresis, solid-phase extraction, membrane preconcentration) applied to compensate for restricted detection sensitivity. Special attention is given to improvements in interfacing, namely addressing nanospray and coaxial sheath liquid design. Peptide mapping, collision-induced dissociation with subsequent tandem MS, and amendments in mass accuracy of instruments improve information validity gained from MS data. With 2-D on-line coupling of liquid chromatography (LC) and CE a further topic will be discussed. A special section is dedicated to recent attempts in establishing CE-ESI-MS in proteomics, in the clinical and diagnostic field, and in the food sector.

Sample preparation for peptides and proteins in biological matrices prior to liquid chromatography and capillary zone electrophoresis

The determination of peptides and proteins in a biological matrix normally includes a sample-preparation step to obtain a sample that can be injected into a separation system in such a way that peptides and proteins of interest can be determined qualitatively and/or quantitatively. This can be a rather challenging, labourious and/or time-consuming process. The extract obtained after sample preparation is further separated using a compatible separation system. Liquid chromatography (LC) is the generally applied technique for this purpose, but capillary zone electrophoresis (CZE) is an alternative, providing fast, versatile and efficient separations. In this review, the recent developments in the combination of sample-preparation procedures with LC and CZE, for the determination of peptides and proteins, will be discussed. Emphasis will be on purification from and determination in complex biological matrices (plasma, cell lysates, etc.) of these compounds and little attention will be paid to the proteomics area. Additional focus will be put on sample-preparation conditions, which can be 'hard' or 'soft', and on selectivity issues. Selectivity issues will be addressed in combination with the used separation technique and a comparison between LC and CZE will be made.

Capillary sodium dodecyl sulfate-DALT electrophoresis with laser-induced fluorescence detection for size-based analysis of proteins in human colon cancer cells

Capillary sodium dodecyl sulfate (SDS)-DALT electrophoresis (SDS-DALT-CE) refers to CE separation of proteins based on their size; DALT is the abbreviation for Dalton, the unit used to describe molecular weight. In this work, seven proteins from 18 to 116 kDa were denatured by SDS, labeled by 3-(2-furoyl) quinoline-2-carboxaldehyde, separated by SDS-DALT-CE in polyethylene oxide sieving matrix, and detected by laser-induced fluorescence (LIF) in a sheath flow cuvette. This method was combined with detergent differential fractionation, which is a protein fractionation method using a series of detergent-containing buffers to sequentially extract protein fractions from cells, to analyze the proteins in HT29 human colon adenocarcinoma cells. In addition, on-column labeling was demonstrated for protein analysis by SDS-DALT-CE with LIF, and applied to analysis of proteins in a single HT29 cancer cell. Most proteins had molecular masses from 10 to 120 kDa. Similar protein profiles were obtained for single cells and protein extract of a large cell population.

Multiple sprayer system for high-throughput electrospray ionization mass spectrometry

A multiple sprayer electrospray ion source for high-throughput analysis is described. The ion source is comprised of multiple electrospray capillaries, each with an ion lens located near the tip. The electric potentials applied to the ion lenses are used to control the sprayers. The use of ion lenses eliminates the need for mechanical blocking devices to selectively enable or disable the sprayers, and results in a less expensive and more reliable set-up. Sprayers can be enabled or disabled within approximately 50-250 ms when the lens potentials are controlled manually. For simultaneous operation of multiple electrospray capillaries, it is advantageous to orient the capillaries so that the spray from each passes directly in front of the entrance aperture of the mass spectrometer.

Capillary sodium dodecyl sulfate-DALT electrophoresis of proteins in a single human cancer cell

Capillary Sodium dodlecyl sulfate (SDS)-DALT an (abbreviation for Dalton) electrophoresis was applied to analysis of proteins in single HT29 human colon adenocarcinoma cells. A vacuum pulse was employed to introduce a single cell into the coated capillary. Once the cell was lysed, proteins were denatured with SDS, fluorescantly labeled with 3-(2-furoyl)-quinoline-2-carboxaldehyde (FQ), and then separated by using 8% pullulan as the sieving matrix. This method offers a few advantages for single-cell protein analysis. First, it provides reproducible separation of single-cell proteins according to their size. Based on comparison with the migration time of standard proteins, most components from a single HT29 cancer cell have molecular masses within the range of 10-100 kDa. Second, as a one-dimensional separation method, it gives fairly good resolution for proteins. Typically, around 30 protein components of a single HT29 cell were resolved, indicating that this method has similar peak capacity to SDS-polyacrylamide gel electrophoresis (PAGE). Third, this method shows high detection sensitivity and wide dynamic range, which is important because of the wide range of protein expression in living systems. Detection limits for standard proteins ranged from 10(-10) to 10(-11) M. Finally, this method provides much higher speed than classical gel electrophoresis methods, and it provides automated anlysis of cellular proteins at the single-cell level; the separation is complete in 30 min and the entire analysis takes approximately 45 min.

Recent advances in capillary electrophoresis/electrospray-mass spectrometry

In this review, the progress in hyphenation of capillary electrophoresis (CE) with electrospray ionization-mass spectrometry (ESI-MS) since the article of Banks (Banks, J. F., Electrophoresis 1997, 18, 2255-2266) is reported. In all capillary-based electromigration techniques, such as capillary gel electrophoresis (CGE), capillary isotachophoresis (CITP), capillary isoelectric focussing (CIEF), micellar electrokinetic chromatography (MEKC), affinity capillary electrophoresis (ACE), as well as in the hybrid techniques capillary electrochromatography (CEC), and pressurized capillary electrochromatography (pCEC) progress has been made in experimental setups, and for many groups of analytes, such as peptides, proteins, nucleotides, saccharides, drugs and their metabolites, CE/ESI-MS has been successfully applied. Electromigration is further miniaturized. New preconcentration methods allow the investigation of compounds, which are not sensitively detected with ESI-MS. Coordination ion spray (CIS) MS is another method for sensitivity enhancement by on-line formation of charged coordination compounds.