A fusion protein system for the recombinant production of short disulfide-containing peptides

Differential activity on trypanosomatid parasites of a novel recombinant defensin type 1 from the insect Triatoma (Meccus) pallidipennis

Defensins are one of the major families of antimicrobial peptides (AMPs) that are widely distributed in insects. In Triatomines (Hemiptera: Reduviidae) vectors of Trypanosoma cruzi the causative agent of Chagas disease, two large groups of defensin isoforms have been described: type 1 and type 4. The aim of this study was to analyze the trypanocidal activity of a type 1 recombinant defensin (rDef1.3) identified in Triatoma (Meccus) pallidipennis, an endemic specie from México. The trypanocidal activity of this defensin was evaluated in vitro, against the parasites T. cruzi, T. rangeli, and two species of Leishmania (L. mexicana and L. major) both causative agents of cutaneous leishmaniasis. Our data demonstrated that the defensin was active against all the parasites although in different degrees. The defensin altered the morphology, reduced the viability and inhibited the growth of T.cruzi. When tested against T. rangeli (a parasite that infects a variety of mammalian species), stronger morphological effects where observed. Surprisingly the greatest effects were observed against the two Leishmania species, of which L. major was the parasite most affected with 50% of dead cells or with damaged membranes, in addition of a reduction in its proliferative capacity in culture. These results suggest that rDef1.3 has an important antimicrobial effect against trypanosomatids which cause some of the more important neglected tropical diseases transmitted by insect vectors.

A novel approach of recombinant laterosporulin production using the N-SH2 domain of SHP-2

Background

The current study was aimed at evaluating the role of the N-SH2 domain of SHP-2 as a partner protein in the expression of a toxic peptide, laterosporulin (LTS). We also investigated its effects on the formation of the disulfide bond and functional folding of the peptide in vitro. The N-SH2-LTS protein was expressed as a His-tagged fusion protein, capable of undergoing enzymatic cleavage.

Results

Based on the data presented herein, the total yield of the folded fusion protein from inclusion bodies was found to be about 105 mg/l, demonstrating a high-level of heterologous expression. After enzymatic cleavage, 1.5 mg of the folded recombinant laterosporulin was obtained from each 10 mg of the fusion protein. The purity of the recombinant laterosporulin was analyzed by RP-HPLC, to yield peptides with suitable purity (85%).

Conclusions

Our findings indicated the advantages of using the N-SH2 domain of SHP-2 as a rapid and easy approach not only in producing easy target proteins but also in its function as a chaperone. N-SH2 domain of SHP-2 can influence on the purification of laterosporulin at reasonable yield and in a cost-effective fashion. The N-SH2 domain of SHP-2 as a protein chaperone may be potentially favorable to produce other proteins with disulfide bonds.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12896-021-00721-7.

Phage-display reveals interaction of lipocalin allergen Can f 1 with a peptide resembling the antigen binding region of a human γδT-cell receptor

Although some progress has been achieved in understanding certain aspects of the allergenic mechanism of animal lipocalins, they still remain largely enigmatic. One possibility to unravel this property is to investigate their interaction with components of the immune system. Since these components are highly complex we intended to use a high-throughput technology for this purpose. Therefore, we used phage-display of a random peptide library for panning against the dog allergen Can f 1. By this method we identified a Can f 1 binding peptide corresponding to the antigen-binding site of a putative γδT-cell receptor. Additional biochemical investigations confirmed this interaction.

A bicistronic vector with destabilized mRNA secondary structure yields scalable higher titer expression of human neurturin in E. coli

Human neurturin (NTN) is a cystine knot growth factor with potential therapeutic use in diseases such as Parkinson's and diabetes. Scalable high titer production of native NTN is particularly challenging because of the cystine knot structure which consists of an embedded ring comprised of at least three disulfide bonds. We sought to pursue enhanced scalable production of NTN in Escherichia coli. Our initial efforts focused on codon optimization of the first two codons following AUG, but these studies resulted in only a marginal increase in NTN expression. Therefore, we pursued an alternative strategy of using a bicistronic vector for NTN expression designed to reduce mRNA secondary structure to achieve increased ribosome binding and re-initiation. The first cistron was designed to prevent sequestration of the translation initiation region in a secondary conformation. The second cistron, which contained the NTN coding sequence itself, was engineered to disrupt double bonded base pairs and destabilize the secondary structure for ribosome re-initiation. The ensemble approach of reducing NTN's mRNA secondary structure and using the bicistronic vector had an additive effect resulting in significantly increased NTN expression. Our strain selection studies were conducted in a miniaturized bioreactor. An optimized strain was selected and scaled up to a 100 L fermentor, which yielded an inclusion body titer of 2 g/L. The inclusion bodies were refolded to yield active NTN. We believe that our strategy is applicable to other candidate proteins that are difficult-to-express due to stable mRNA secondary structures. Biotechnol. Bioeng. 2017;114: 1753-1761. © 2017 Wiley Periodicals, Inc.

Extraction and purification methods in downstream processing of plant-based recombinant proteins

During the last two decades, the production of recombinant proteins in plant systems has been receiving increased attention. Currently, proteins are considered as the most important biopharmaceuticals. However, high costs and problems with scaling up the purification and isolation processes make the production of plant-based recombinant proteins a challenging task. This paper presents a summary of the information regarding the downstream processing in plant systems and provides a comprehensible overview of its key steps, such as extraction and purification. To highlight the recent progress, mainly new developments in the downstream technology have been chosen. Furthermore, besides most popular techniques, alternative methods have been described.

A phosphorylation tag for uranyl mediated protein purification and photo assisted tag removal

Most protein purification procedures include an affinity tag fused to either the N or C-terminal end of the protein of interest as well as a procedure for tag removal. Tag removal is not straightforward and especially tag removal from the C-terminal end is a challenge due to the characteristics of enzymes available for this purpose. In the present study, we demonstrate the utility of the divalent uranyl ion in a new procedure for protein purification and tag removal. By employment of a GFP (green florescence protein) recombinant protein we show that uranyl binding to a phosphorylated C-terminal tag enables target protein purification from an E. coli extract by immobilized uranyl affinity chromatography. Subsequently, the tag can be efficiently removed by UV-irradiation assisted uranyl photocleavage. We therefore suggest that the divalent uranyl ion (UO₂²⁺) may provide a dual function in protein purification and subsequent C-terminal tag removal procedures.

Peptide inhibitors of the malaria surface protein, apical membrane antigen 1: identification of key binding residues

Apical membrane antigen 1 (AMA1) is essential for malaria parasite invasion of erythrocytes and is therefore an attractive target for drug development. Peptides that bind AMA1 have been identified from random peptide libraries expressed on the surface of phage. Of these, R1, which binds to a hydrophobic ligand binding site on AMA1, was a particularly potent inhibitor of parasite invasion of erythrocytes in vitro. The solution structure of R1 contains a turn-like conformation between residues 5-10. Here the importance of residues in this turn-like structure for binding to AMA1 was examined by site-directed mutagenesis and NMR spectroscopy. The peptide was expressed as a fusion protein following replacement of Met16 by Leu in order to accommodate cyanogen bromide cleavage. This modified peptide (R2) displayed the same affinity for AMA1 as R1, showing that the identity of the side chain at position 16 was not critical for binding. Substitution of Phe5, Pro7, Leu8, and Phe9 with alanine led to significant (7.5- to >350-fold) decreases in affinity for AMA1. Comparison of backbone amide and C(α) H chemical shifts for these R2 analogues with corresponding values for R2 showed no significant changes, with the exception of R2(P7A), where slightly larger differences were observed, particularly for residues flanking position 7. The absence of significant changes in the secondary chemical shifts suggests that these mutations had little effect on the solution conformation of R2. The identification of a nonpolar region of these peptides containing residues essential for AMA1 binding establishes a basis for the design of anti-malarial drugs based on R1 mimetics.

Making the most of fusion tags technology in structural characterization of membrane proteins

Membrane proteins can be investigated at various structural levels, including the topological structure, the high-resolution three-dimensional structure, and the organization and assembly of membrane protein complexes. Gene fusion technology makes it possible to insert a polynucleotide encoding a protein or polypeptide tag into the gene encoding a membrane protein of interest. Resultant recombinant proteins may possess the functions of the original membrane proteins, together with the biochemical properties of the imported fusion tag, greatly enhancing functional and structural studies of membrane proteins. In this article, the latest literature is reviewed in relation to types, applications, strategies, and approaches to fusion tag technology for structural investigations of membrane proteins.

Tagging for protein expression

Tags are frequently used in the expression of recombinant proteins to improve solubility and for affinity purification. A large number of tags have been developed for protein production and researchers face a profusion of choices when designing expression constructs. Here, we survey common affinity and solubility tags, and offer some guidance on their selection and use.

Microbodies

Microbodies are novel pharmacophoric entities which are derived from naturally occurring cystine-knot microproteins. They provide extremely stable scaffolds that can be engineered to high-affinity binding proteins. A peptide-grafting approach yielded specific ligands for human thrombopoietin receptor (TPO-R). Thrombopoietin (TPO) is the primary regulator of platelet production and acts by dimerization of its cognate receptor. Chemical cross linking of two anti TPO-R Microbodies resulted in highly potent TPO mimetics which are promising candidates for the treatment of TPO deficiencies. The approach demonstrates the high potential of dimeric Microbodies as synthetic receptor agonists.

Chemical ligation and cleavage on solid support facilitate recombinant peptide purification

Recombinant peptide technology offers a promising means alternative to chemical synthesis and natural extraction of peptides. The bottleneck in the process of recombinant peptide production is the paucity of efficient purification protocols to eliminate heterogeneity of the desired preparation. Here, we introduce a combination strategy to facilitate purification of recombinant therapeutic peptide via native chemical ligation and chemical cleavage on a solid support. In this study, one promising therapeutic peptide called for type-2 diabetes, GLP-1(7-37), was prepared with high yield and purity without an expensive HPLC purification. Furthermore, this method is also useful for the preparation of isotopically labeled NMR peptide samples. Hopefully, this strategy combining chemical ligation with chemical cleavage on a solid support will ameliorate the production of important recombinant pharmaceutical peptides.

Expression and purification of recombinant human alpha-defensins in Escherichia coli

Different strategies have been developed to produce small antimicrobial peptides (AMPs) using recombinant techniques. Up to now, all efforts to obtain larger quantities of active recombinant human alpha-defensins have been only moderately successful. Here we report an effective method of biosynthesis of human alpha-defensins (hNP-1 to hNP-3 and hD-5 and hD-6) in the Escherichia coli. All the peptides, expressed as insoluble fusions with the peptide encoded by a portion of E. coli tryptophan operon (trp DeltaLE 1413 polypeptide), were isolated from the inclusion bodies by immobilized metal affinity chromatography (IMAC) and separated from the fusion leader by chemical cleavage. Fully reduced peptides that were purified according to a straightforward protocol were subsequently folded, oxidized, and subjected to functional and structural analyses. With the exception of hD-6, all recombinant alpha-defensins exhibit expected anti-E. coli activity, as measured by the colony counting method. The method described in this report is a low-cost, efficient way of generating alpha-defensins in quantities ranging from milligrams to grams.

Manufacturing of recombinant therapeutic proteins in microbial systems

Recombinant therapeutic proteins have gained enormous importance for clinical applications. The first recombinant products have been produced in E. coli more than 20 years ago. Although with the advent of antibody-based therapeutics mammalian expression systems have experienced a major boost, microbial expression systems continue to be widely used in industry. Their intrinsic advantages, such as rapid growth, high yields and ease of manipulation, make them the premier choice for expression of non-glycosylated peptides and proteins. Innovative product classes such as antibody fragments or alternative binding molecules will further expand the use of microbial systems. Even more, novel, engineered production hosts and integrated technology platforms hold enormous potential for future applications. This review summarizes current applications and trends for development, production and analytical characterization of recombinant therapeutic proteins in microbial systems.

Current strategies for the use of affinity tags and tag removal for the purification of recombinant proteins

Affinity tags are highly efficient tools for protein purification. They allow the purification of virtually any protein without any prior knowledge of its biochemical properties. The use of affinity tags has therefore become widespread in several areas of research e.g., high throughput expression studies aimed at finding a biological function to large numbers of yet uncharacterized proteins. In some cases, the presence of the affinity tag in the recombinant protein is unwanted or may represent a disadvantage for the projected application of the protein, like for clinical use. Therefore, an increasing number of approaches are available at present that are designed for the removal of the affinity tag from the recombinant protein. Most of these methods employ recombinant endoproteases that recognize a specific sequence. These process enzymes can subsequently be removed from the process by affinity purification, since they also include a tag. Here, a survey of the most common affinity tags and the current methods for tag removal is presented, with special emphasis on the removal of N-terminal histidine tags using TAGZyme, a system based on exopeptidase cleavage. In the quest to reduce the significant costs associated with protein purification at large scale, relevant aspects involved in the development of downstream processes for pharmaceutical protein production that incorporate a tag removal step are also discussed. A comparison of the yield of standard vs. affinity purification together with an example of tag removal using TAGZyme is also included.

Overexpression, purification, and pharmacological activity of a biosynthetically derived conopeptide

A high yielding fusion protein system based on the protein cytochrome b(5) has been used for the production of novel 13-residue acyclic conopeptide. This peptide, Mo1659, can be liberated from the carrier protein using CNBr cleavage and subsequent purification using RP-HPLC methods. The yield of isotopically enriched peptides is high, ranging from 3 to 4mg of purified peptide from a 500ml culture, indicating that this system can be widely used for peptide production. Biosynthetic Mo1659 is active on non-inactivating K(+) channel much like the natural Mo1659, despite the absence of C-terminal amidation. Heteronuclear NMR studies show that the peptide exists in a conformational equilibrium involving proline-10. To our knowledge this is the first report of the production of an isotopically (15)N/(13)C-enriched conopeptide.

Heterologous expression, characterization and structural studies of a hydrophobic peptide from the HIV-1 p24 protein

Proteins from the inner core of HIV-1, such as the capsid protein (p24), are involved in crucial processes during the virus life cycle. The p24 protein plays an active structural role in the Gag protein and in its mature form. This work describes the production of a peptide derived from the p24 C-terminal, TLRAEQASQEVKNWMTETLLVQNA, using recombinant technology. This region (p24-3) is involved in interfaces during the p24 dimerization, which occurs during capsid assembly. The p24-3 sequence was obtained by a synthetic gene strategy and inserted into the pET 32a expression vector to produce soluble fusion protein in Escherichia coli BL21(DE3). This strategy leads to an incorporation of three amino acid residues (AMA) in the N-terminal of the native sequence to form the recombinant p24-3 (rp24-3). The rp24-3 was purified by reverse phase chromatography to homogeneity, as inferred by mass spectrometry and protein sequence analysis. Structural studies using circular dichroism and steady-state fluorescence showed that the rp24-3 is structured by helical and beta elements. As a function of its hydrophobic character it can self-associate forming oligomers. We present in this paper the first development of a suitable expression system for rp24-3, which provides high amounts of the peptide. This strategy will allow the development of new antiviral (HIV) agents.

A fusion protein system for the recombinant production of short disulfide bond rich cystine knot peptides using barnase as a purification handle

The inhibitor cystine knot (ICK) structural motif has been found in several small proteins and peptides from plants, insects, marine molluscs, and also in human. It is defined by a triple beta-sheet that is held together by three intramolecular disulfide bonds built by six conserved cysteine residues that generate a highly rigid and stable fold. We describe a procedure for the production of ICK peptides with correct disulfide bond connectivities via expression in Escherichia coli as fusion proteins with an enzymatically inactive variant of the Bacillus amyloliquefaciens RNAse barnase. Barnase directs the fused peptide to the culture medium and the fusion protein can be isolated by combined cation exchange/reverse-phase chromatography. The ICK peptides are released from the barnase expression and purification handle either by cyanogen bromide or by protease cleavage to give pure and correctly folded cystine knot peptides.

Bioprocess-centered molecular design (BMD) for the efficient production of an interfacially active peptide

The efficient expression and purification of an interfacially active peptide (mLac21) was achieved by using bioprocess-centered molecular design (BMD), wherein key bioprocess considerations are addressed during the initial molecular biology work. The 21 amino acid mLac21 peptide sequence is derived from the lac repressor protein and is shown to have high affinity for the oil-water interface, causing a substantial reduction in interfacial tension following adsorption. The DNA coding for the peptide sequence was cloned into a modified pET-31(b) vector to permit the expression of mLac21 as a fusion to ketosteroid isomerase (KSI). Rational iterative molecular design, taking into account the need for a scaleable bioprocess flowsheet, led to a simple and efficient bioprocess yielding mLac21 at 86% purity following ion exchange chromatography (and >98% following chromatographic polishing). This case study demonstrates that it is possible to produce acceptably pure peptide for potential commodity applications using common scaleable bioprocess unit operations. Moreover, it is shown that BMD is a powerful strategy that can be deployed to reduce bioseparation complexity.

Affinity maturation of leukemia inhibitory factor and conversion to potent antagonists of signaling

Leukemia inhibitory factor (LIF)-induced cell signaling occurs following sequential binding to the LIF receptor alpha-chain (LIFR), then to the gp130 co-receptor used by all members of the interleukin-6 family of cytokines. By monovalently displaying human LIF on the surface of M13 phage and randomizing clusters of residues in regions predicted to be important for human LIFR binding, we have identified mutations, which lead to significant increases in affinity for binding to LIFR. Six libraries were constructed in which regions of 4-6 amino acids were randomized then panned against LIFR. Mutations identified in three distinct clusters, residues 53-57, 102-103, and 150-155, gave rise to proteins with significantly increased affinity for binding to both human and mouse LIFR. Combining the mutations for each of these regions further increased the affinity, such that the best mutants bound to human LIFR with >1000-fold higher affinity than wild-type human LIF. NMR analysis indicated that the mutations did not alter the overall structure of the molecule relative to the native protein, although some local changes occurred in the vicinity of the substituted residues. Despite increases in LIFR binding affinity, these mutants did not show any increase in activity as agonists of LIF-induced proliferation of Ba/F3 cells expressing human LIFR and gp130 compared with wild-type LIF. Incorporation of two additional mutations (Q29A and G124R), which were found to abrogate cell signaling, led to the generation of highly potent antagonists of both human and murine LIF-induced bioactivity.

A critical review of the methods for cleavage of fusion proteins with thrombin and factor Xa

Expression and purification of proteins in recombinant DNA systems is a powerful and widely used technique. Frequently there is the need to express the protein of interest as a fusion protein or chimeric protein. Fusion protein technology is frequently used to attach a "signal" which can be used for subsequent localization of the protein or a "carrier" which can be used to deliver a "therapeutic" such as a radioactive molecule to a specific site. In addition to these applications, fusion protein technology can be employed for several other useful purposes. Of these, the most frequent reason is to provide a 'tag' or 'handle' which will aid in the purification of the protein. Another useful purpose is to improve the expression or folding of the protein of interest. In these latter two situations, it is often necessary to remove the fusion partner before the recombinant protein of interest can be used for further studies. This removal process involves the insertion of a unique amino acid sequence that is susceptible to cleavage by a highly specific protease. Thrombin and factor Xa are the most frequently used proteases for this application. The purpose of this review is to discuss the application of thrombin and factor Xa for the cleavage of fusion proteins. It is emphasized that while these enzymes are quite specific for cleavage at the inserted cleavage site, proteolysis can frequently occur at other site(s) in the protein of interest. It is necessary to characterize the protein of interest after cleavage from the affinity label to assure that there are no changes in the covalent structure of the protein of interest. Examples are presented which describe the proteolysis of the protein of interest by either factor Xa or thrombin.