Two-dimensional streptavidin crystals: macropatterns and micro-organization

Bio-Interface on Freestanding Nanosheet of Microelectromechanical System Optical Interferometric Immunosensor for Label-Free Attomolar Prostate Cancer Marker Detection

Various biosensors that are based on microfabrication technology have been developed as point-of-care testing devices for disease screening. The Fabry–Pérot interferometric (FPI) surface-stress sensor was developed to improve detection sensitivity by performing label-free biomarker detection as a nanomechanical deflection of a freestanding membrane to adsorb the molecules. However, chemically functionalizing the freestanding nanosheet with excellent stress sensitivity for selective molecular detection may cause the surface chemical reaction to deteriorate the nanosheet quality. In this study, we developed a minimally invasive chemical functionalization technique to create a biosolid interface on the freestanding nanosheet of a microelectromechanical system optical interferometric surface-stress immunosensor. For receptor immobilization, glutaraldehyde cross-linking on the surface of the amino-functionalized parylene membrane reduced the shape variation of the freestanding nanosheet to 1/5–1/10 of the previous study and achieved a yield of 95%. In addition, the FPI surface-stress sensor demonstrated molecular selectivity and concentration dependence for prostate-specific antigen with a dynamic range of concentrations from 100 ag/mL to 1 µg/mL. In addition, the minimum limit of detection of the proposed sensor was 2,000,000 times lower than that of the conventional nanomechanical cantilevers.

Heteroepitaxial streptavidin nanocrystals reveal critical role of proton "fingers" and subsurface atoms in determining adsorbed protein orientation

Characterization of noncovalent interactions between nanometer-sized structures, such as proteins, and solid surfaces is a subject of intense interest of late owing to the rapid development of numerous solid materials for medical and technological applications. Yet the rational design of these surfaces to promote the adsorption of specific nanoscale complexes is hindered by a lack of an understanding of the noncovalent interactions between nanostructures and solid surfaces. Here we take advantage of the unexpected observation of two-dimensional nanocrystals of streptavidin on muscovite mica to provide details of the streptavidin-mica interface. Analysis of atomic force microscopic images together with structural modeling identifies six positively charged residues whose terminal amine locations match the positions of the single atom-sized anionic cavities in the basal mica surface to within 1 Å. Moreover, we find that the streptavidin crystallites are oriented only along a single direction on this surface and not in either of three different directions as they must be if the protein interacted solely with the 3-fold symmetric basal surface atoms. Hence, this broken symmetry indicates that the terminal amine protons must also interact directly with the subsurface hydroxide atoms that line the bottom of these anionic cavities and generate only a single axis of symmetry. Thus, in total, these results reveal that subsurface atoms can have a significant influence on protein adsorption and orientation and identify the insertion of proton "fingers" as a means by which proteins may generally interact with solid surfaces.

Recent advances in colloidal and interfacial phenomena involving liquid crystals

This feature article describes recent advances in several areas of research involving the interfacial ordering of liquid crystals (LCs). The first advance revolves around the ordering of LCs at bio/chemically functionalized surfaces. Whereas the majority of past studies of surface-induced ordering of LCs have involved surfaces of solids that present a limited diversity of chemical functional groups (surfaces at which van der Waals forces dominate surface-induced ordering), recent studies have moved to investigate the ordering of LCs on chemically complex surfaces. For example, surfaces decorated with biomolecules (e.g., oligopeptides and proteins) and transition-metal ions have been investigated, leading to an understanding of the roles that metal-ligand coordination interactions, electrical double layers, acid-base interactions, and hydrogen bonding can play in the interfacial ordering of LCs. The opportunity to create chemically responsive LCs capable of undergoing ordering transitions in the presence of targeted molecular events (e.g., ligand exchange around a metal center) has emerged from these fundamental studies. A second advance has focused on investigations of the ordering of LCs at interfaces with immiscible isotropic fluids, particularly water. In contrast to prior studies of surface-induced ordering of LCs on solid surfaces, LC-aqueous interfaces are deformable and molecules at these interfaces exhibit high levels of mobility and thus can reorganize in response to changes in the interfacial environment. A range of fundamental investigations involving these LC-aqueous interfaces have revealed that (i) the spatial and temporal characteristics of assemblies formed from biomolecular interactions can be reported by surface-driven ordering transitions in the LCs, (ii) the interfacial phase behavior of molecules and colloids can be coupled to (and manipulated via) the ordering (and nematic elasticity) of LCs, and (iii) the confinement of LCs leads to unanticipated size-dependent ordering (particularly in the context of LC emulsion droplets). The third and final advance addressed in this article involves interactions between colloids mediated by LCs. Recent experiments involving microparticles deposited at the LC-aqueous interface have revealed that LC-mediated interactions can drive interfacial assemblies of particles through reversible ordering transitions (e.g., from 1D chains to 2D arrays with local hexagonal symmetry). In addition, recent single-nanoparticle measurements suggest that the ordering of LCs about nanoparticles differs substantially from micrometer-sized particles and that the interactions between nanoparticles mediated by the LCs are far weaker than predicted by theory (sufficiently weak that the interactions are reversible and thus enable self-assembly). Finally, LC-mediated interactions between colloidal particles have also been shown to lead to the formation of colloid-in-LC gels that possess mechanical properties relevant to the design of materials that interface with living biological systems. Overall, these three topics serve to illustrate the broad opportunities that exist to do fundamental interfacial science and discovery-oriented research involving LCs.

Accumulation and separation of membrane-bound proteins using hydrodynamic forces

The separation of molecules residing in the cell membrane remains a largely unsolved problem in the fields of bioscience and biotechnology. We demonstrate how hydrodynamic forces can be used to both accumulate and separate membrane-bound proteins in their native state. A supported lipid bilayer (SLB) was formed inside a microfluidic channel with the two proteins streptavidin (SA) and cholera toxin (CT) coupled to receptors in the lipid bilayer. The anchored proteins were first driven toward the edge of the lipid bilayer by hydrodynamic forces from a flowing liquid above the SLB, resulting in the accumulation of protein molecules at the edge of the bilayer. After the concentration process, the bulk flow of liquid in the channel was reversed and the accumulated proteins were driven away from the edge of the bilayer. Each type of protein was found to move at a characteristic drift velocity, determined by the frictional coupling between the protein and the lipid bilayer, as well as the size and shape of the protein molecule. Despite having a similar molecular weight, SA and CT could be separated into monomolecular populations using this approach. The method also revealed heterogeneity among the CT molecules, resulting in three subpopulations with different drift velocities. This was tentatively attributed to multivalent interactions between the protein and the monosialoganglioside G(M1) receptors in the lipid bilayer.

Molecular self-assembly of solid-supported protein crystals

Highly ordered protein arrays have been proposed as a means for templating the organization of nanomaterials. Toward this end, we investigate the ability of the protein streptavidin to self-assemble into various configurations on solid-supported phospholipids. We identify two genetic variants of streptavidin (comprising amino acids 14-136 and 13-139) and examine their molecular organization at the liquid-solid interface. Our results demonstrate that the structural differences between these two protein variants affect both crystalline lattice and domain morphology. In general, these results for the liquid-solid interface are similar and consistent with those at the air-water interface with a few notable differences. Analogous to crystallization at the air-water interface, both forms of streptavidin yield H-like domains with lattice parameters that have C222 symmetry at pH 7. At pH 4, the native, truncated form of streptavidin yields needle-like domains consisting of molecules arranged in P1 symmetry. Unlike crystalline domains grown at the air-water interface, however, the lattice parameters of this P1 crystal are unique and have not yet been reported. The presence of a solid substrate does not appear to dramatically alter streptavidin's two-dimensional crystallization behavior, suggesting that local intermolecular interactions between proteins are more significant than interactions between the interface and protein. Our results also demonstrate that screening the electrostatic repulsion between protein molecules by modulating ionic strength will increase growth rate while decreasing crystalline domain size and macroscopic defects. Finally, we show that these domains are indeed functional by attaching biotinylated gold nanoparticles to the crystals. The ability to modulate molecular configuration, crystalline defects, and domain size on a functional array supports the potential application of this system toward materials assembly.

Biomolecular interactions at phospholipid-decorated surfaces of liquid crystals

The spontaneous assembly of phospholipids at planar interfaces between thermotropic liquid crystals and aqueous phases gives rise to patterned orientations of the liquid crystals that reflect the spatial and temporal organization of the phospholipids. Strong and weak specific-binding events involving proteins at these interfaces drive the reorganization of the phospholipids and trigger orientational transitions in the liquid crystals. Because these interfaces are fluid, processes involving the lateral organization of proteins (such as the formation of protein- and phospholipid-rich domains) are also readily imaged by the orientational response of the liquid crystal, as are stereospecific enzymatic events. These results provide principles for label-free monitoring of aqueous streams for molecular and biomolecular species without the need for complex instrumentation.

Protein adsorption: Kinetics and history dependence

The adsorption of protein and other macromolecular species is often strongly history dependent owing to the slow relaxation of nonequilibrium structures. The rate at which molecules adsorb is exquisitely sensitive to, and thus a sensitive measure of, interfacial structure; adsorption kinetics may therefore serve both to identify and to quantify history dependence. Optical waveguide lightmode spectroscopy (OWLS) in multistep mode, where an adsorbing surface is alternately exposed to a protein solution and one free of protein, enables the comparison of adsorption rates onto interfacial layers of identical composition but different formation histories. Contributions to the overall kinetics from the apparent adsorption rate constant, the desorption rate constants of molecules in different adsorbed states, and the interfacial one-body cavity function (a measure of the probability of a "cavity" on the surface free of protein) may be isolated from OWLS kinetic data. We find the rate of adsorption and the corresponding cavity function to increase significantly-for systems of fibronectin, cytochrome c, and lysozyme adsorbing onto Si(Ti)O(2)-from a first to a subsequent adsorption step and attribute this to a clustering transition among adsorbed protein molecules. From the kinetic data, we determine important structural and temporal information on this event.

Immobilization and surface characterization of NeutrAvidin biotin-binding protein on different hydrogel interlayers

For a number of potential applications, it is desirable to immobilize avidin class molecules onto solid supports and exploit their ability to bind biotinylated molecules with high affinity. NeutrAvidin molecules were surface immobilized in various ways. In this study, NeutrAvidin was covalently attached by carbodiimide chemistry onto carboxyl groups of polyacrylic acid and carboxymethyl-dextran hydrogel interlayers. A third strategy involved the affinity "docking" of NeutrAvidin onto a biotinylated poly(ethylene glycol) interlayer. These three interlayers were selected for their low nonspecific binding of proteins, which was expected to minimize surface binding of NeutrAvidin by nonspecific interfacial adsorption. X-ray photoelectron spectroscopy (XPS) analyses allowed detailed characterization of the multilayer fabrication steps. An ELISA assay was used to measure NeutrAvidin activity, which varied with the surface immobilization route. Atomic force microcopy (AFM) force measurements showed that the hydrogel interlayer contributed to a repulsive force and verified the specific interaction between biotinylated AFM tips and the NeutrAvidin surfaces. When a solution of free biotin was injected into the AFM liquid cell, the force curve changed substantially and became identical to that recorded between surfaces carrying no NeutrAvidin, indicating that the free solution biotin had displaced NeutrAvidin proteins off the PEG-biotin layer.