Fluorescence resonance energy transfer as a structural tool for nucleic acids

Interactions of small molecules with DNA junctions

The four natural DNA bases (A, T, G and C) associate in base pairs (A=T and G≡C), allowing the attached DNA strands to assemble into the canonical double helix of DNA (or duplex-DNA, also known as B-DNA). The intrinsic supramolecular properties of nucleobases make other associations possible (such as base triplets or quartets), which thus translates into a diversity of DNA structures beyond B-DNA. To date, the alphabet of DNA structures is ripe with approximately 20 letters (from A- to Z-DNA); however, only a few of them are being considered as key players in cell biology and, by extension, valuable targets for chemical biology intervention. In the present review, we summarise what is known about alternative DNA structures (what are they? When, where and how do they fold?) and proceed to discuss further about those considered nowadays as valuable therapeutic targets. We discuss in more detail the molecular tools (ligands) that have been recently developed to target these structures, particularly the three- and four-way DNA junctions, in order to intervene in the biological processes where they are involved. This new and stimulating chemical biology playground allows for devising innovative strategies to fight against genetic diseases.

A Carbazole-Derived Nitroxide That Is an Analogue of Cytidine: A Rigid Spin Label for DNA and RNA

A variety of semirigid and rigid spin labels comprise a valuable arsenal for measurements of biomolecular structures and dynamics by electron paramagnetic resonance (EPR) spectroscopy. Here, we report the synthesis and characterization of rigid spin labels Ċ and Ċm for DNA and RNA, respectively, that are carbazole-derived nitroxides and analogues of cytidine. Ċ and Ċm were converted to their phosphoramidites and used for their incorporation into oligonucleotides by solid-phase synthesis. Analysis of Ċ and Ċm by single-crystal X-ray crystallography verified their identity and showed little deviation from planarity of the nucleobase. Analysis of the continuous-wave (CW) EPR spectra of the spin-labeled DNA and RNA duplexes confirmed their incorporation into the nucleic acids and the line-shape was characteristic of rigid spin labels. Circular dichroism (CD) and thermal denaturation studies of the Ċ-labeled DNAs and Ċm-labeled RNAs indicated that the labels are nonperturbing of duplex structure.

Conducting Excitation and Emission Spectra in the IR Regime: Frequency-Domain Time-Resolved Vibrational Four Wave Mixing Spectroscopy

We report new features of recently developed ultrafast coherent multidimensional spectroscopy (CMDS), an optical analogue to multidimensional NMR. By using both frequency- and time-domain nonlinear four wave mixing methods, CMDS is able to directly observe coherence transfer (CT), the coherent quantum mechanical analogue of population relaxation. Using a mixture of acetonitrile and magnesium perchlorate (1.0 M) as a model system, we demonstrated that this one color- and population-involving CT process makes CMDS capable of measuring samples with features that mimic excitation and emission spectral measurements in fluorescence spectroscopy. With the new capabilities, one might develop CMDS into a versatile vibrational tool for revealing the role of coherence as a design element in realizing a function. Furthermore, CT-based vibrational resonance energy transfer (VRET) methods may be developed for label-free biosensing and imaging, such as those demonstrated by fluorescence resonance energy transfer (FRET).

Crystal Structures of Cyanine Fluorophores Stacked onto the End of Double-Stranded RNA

The indodicarbocyanine fluorophores Cy3 and Cy5 are extensively used as donor-acceptor pairs in fluorescence resonance energy transfer experiments, especially those involving single molecules. When terminally attached to double-stranded nucleic acids via the 5' phosphate group these fluorophores stack onto the ends of the molecule. Knowledge of the positions of the fluorophores is critical to the interpretation of fluorescence resonance energy transfer data. The positions have been demonstrated for double-stranded (ds) DNA using NMR spectroscopy. Here, we have used x-ray crystallography to analyze the location of Cy3 and Cy5 on dsRNA, using complexes of an RNA stem-loop bound to L5 protein determined at 2.4 Å resolution. This confirms the tendency of both fluorophores to stack on the free end of RNA, with the long axis of the fluorophores approximately parallel to that of the terminal basepair. However, the manner of interaction of both Cy3 and Cy5 with the terminus of the dsRNA is significantly different from that deduced for dsDNA using NMR. The fluorophores are stacked on the terminal basepair such that their indole nitrogen atoms lie on the major groove side, and thus their pendant methyl groups are on the minor groove side.

Fluorescence-Based Strategies to Investigate the Structure and Dynamics of Aptamer-Ligand Complexes

In addition to the helical nature of double-stranded DNA and RNA, single-stranded oligonucleotides can arrange themselves into tridimensional structures containing loops, bulges, internal hairpins and many other motifs. This ability has been used for more than two decades to generate oligonucleotide sequences, so-called aptamers, that can recognize certain metabolites with high affinity and specificity. More recently, this library of artificially-generated nucleic acid aptamers has been expanded by the discovery that naturally occurring RNA sequences control bacterial gene expression in response to cellular concentration of a given metabolite. The application of fluorescence methods has been pivotal to characterize in detail the structure and dynamics of these aptamer-ligand complexes in solution. This is mostly due to the intrinsic high sensitivity of fluorescence methods and also to significant improvements in solid-phase synthesis, post-synthetic labeling strategies and optical instrumentation that took place during the last decade. In this work, we provide an overview of the most widely employed fluorescence methods to investigate aptamer structure and function by describing the use of aptamers labeled with a single dye in fluorescence quenching and anisotropy assays. The use of 2-aminopurine as a fluorescent analog of adenine to monitor local changes in structure and fluorescence resonance energy transfer (FRET) to follow long-range conformational changes is also covered in detail. The last part of the review is dedicated to the application of fluorescence techniques based on single-molecule microscopy, a technique that has revolutionized our understanding of nucleic acid structure and dynamics. We finally describe the advantages of monitoring ligand-binding and conformational changes, one molecule at a time, to decipher the complexity of regulatory aptamers and summarize the emerging folding and ligand-binding models arising from the application of these single-molecule FRET microscopy techniques.

Diffraction Techniques in Structural Biology

A detailed understanding of chemical and biological function and the mechanisms underlying the molecular activities ultimately requires atomic-resolution structural data. Diffraction-based techniques such as single-crystal X-ray crystallography, electron microscopy, and neutron diffraction are well established and they have paved the road to the stunning successes of modern-day structural biology. The major advances achieved in the last twenty years in all aspects of structural research, including sample preparation, crystallization, the construction of synchrotron and spallation sources, phasing approaches, and high-speed computing and visualization, now provide specialists and nonspecialists alike with a steady flow of molecular images of unprecedented detail. The present unit combines a general overview of diffraction methods with a detailed description of the process of a single-crystal X-ray structure determination experiment, from chemical synthesis or expression to phasing and refinement, analysis, and quality control. For novices it may serve as a stepping-stone to more in-depth treatises of the individual topics. Readers relying on structural information for interpreting functional data may find it a useful consumer guide. © 2016 by John Wiley & Sons, Inc.

β-Glutamine-mediated self-association of transmembrane β-peptides within lipid bilayers

The rational design and synthesis of novel transmembrane β-peptides forming stable secondary structures in a membrane environment are described. Their state of aggregation within the membrane is controlled by hydrogen bonds.

Transmembrane β-peptide helices and their association in lipid membranes are still widely unexplored. We designed and synthesized transmembrane β-peptides harboring different numbers of d-β³-glutamine residues (^hGln) by solid phase peptide synthesis. By means of circular dichroism spectroscopic measurements, the secondary structure of the β-peptides reconstituted into unilamellar vesicles was determined to be similar to a right-handed 3₁₄-helix. Fluorescence spectroscopy using d-β³-tryptophan residues strongly suggested a transmembrane orientation. Two or three ^hGln served as recognition units between the helices to allow helix–helix assembly driven by hydrogen bond formation. The association state of the transmembrane β-peptides as a function of the number of ^hGln residues was investigated by fluorescence resonance energy transfer (FRET). Therefore, two fluorescence probes (NBD, TAMRA) were covalently attached to the side chains of the transmembrane β-peptide helices. The results clearly demonstrate that only β-peptides with ^hGln as recognition units assemble into oligomers, presumably trimers. Temperature dependent FRET experiments further show that the strength of the helix–helix association is a function of the number of ^hGln residues in the helix.

The λ Integrase Site-specific Recombination Pathway

The site-specific recombinase encoded by bacteriophage λ (Int) is responsible for integrating and excising the viral chromosome into and out of the chromosome of its Escherichia coli host. Int carries out a reaction that is highly directional, tightly regulated, and depends upon an ensemble of accessory DNA bending proteins acting on 240 bp of DNA encoding 16 protein binding sites. This additional complexity enables two pathways, integrative and excisive recombination, whose opposite, and effectively irreversible, directions are dictated by different physiological and environmental signals. Int recombinase is a heterobivalent DNA binding protein and each of the four Int protomers, within a multiprotein 400 kDa recombinogenic complex, is thought to bind and, with the aid of DNA bending proteins, bridge one arm- and one core-type DNA site. In the 12 years since the publication of the last review focused solely on the λ site-specific recombination pathway in Mobile DNA II, there has been a great deal of progress in elucidating the molecular details of this pathway. The most dramatic advances in our understanding of the reaction have been in the area of X-ray crystallography where protein-DNA structures have now been determined for of all of the DNA-protein interfaces driving the Int pathway. Building on this foundation of structures, it has been possible to derive models for the assembly of components that determine the regulatory apparatus in the P-arm, and for the overall architectures that define excisive and integrative recombinogenic complexes. The most fundamental additional mechanistic insights derive from the application of hexapeptide inhibitors and single molecule kinetics.

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity-Sensitive Aggregation-Induced Emission (AIE)-Active Tetraphenylethene-Fused BODIPY Dyes with a Very Large Pseudo-Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor-acceptor system. In this respect, a series of donor-acceptor architectures of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor-acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation-induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo-Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non-emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy-transfer processes, namely, FRET and DRET, in one polarity-sensitive donor-acceptor pair system. The accuracy of the dark-emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.

Fluorescence quenching of quantum dots by gold nanoparticles: a potential long range spectroscopic ruler

The dependence of quantum dot (QD) fluorescence emission on the proximity of 30 nm gold nanoparticles (AuNPs) was studied with controlled interparticle distances ranging from 15 to 70 nm. This was achieved by coassembling DNA-conjugated QDs and AuNPs in a 1:1 ratio at precise positions on a triangular-shaped DNA origami platform. A profound, long-range quenching of the photoluminescence intensity of the QDs was observed. A combination of static and time-resolved fluorescence measurements suggests that the quenching is due to an increase in the nonradiative decay rate of QD emission. Unlike FRET, the energy transfer is inversely proportional to the 2.7th power of the distance between nanoparticles with half quenching at ∼28 nm. This long-range quenching phenomena may be useful for developing extended spectroscopic rulers in the future.

Nucleoprotein architectures regulating the directionality of viral integration and excision

The virally encoded site-specific recombinase Int collaborates with its accessory DNA bending proteins IHF, Xis, and Fis to assemble two distinct, very large, nucleoprotein complexes that carry out either integrative or excisive recombination along regulated and essentially unidirectional pathways. The core of each complex consists of a tetramer of Integrase protein (Int), which is a heterobivalent DNA binding protein that binds and bridges a core-type DNA site (where strand cleavage and ligation are executed), and a distal arm-type site, that is brought within range by one or more DNA bending proteins. The recent determination of the patterns of these Int bridges has made it possible to think realistically about the global architecture of the recombinogenic complexes. Here, we combined the previously determined Int bridging patterns with in-gel FRET experiments and in silico modeling to characterize and differentiate the two 400-kDa multiprotein Holiday junction recombination intermediates formed during λ integration and excision. The results lead to architectural models that explain how integration and excision are regulated in λ site-specific recombination. Our confidence in the basic features of these architectures is based on the redundancy and self-consistency of the underlying data from two very different experimental approaches to establish bridging interactions, a set of strategic intracomplex distances from FRET experiments, and the model's ability to explain key aspects of the integrative and excisive recombination pathways, such as topological changes, the mechanism of capturing attB, and the features of asymmetry and flexibility within the complexes.

Photophysical and dynamical properties of doubly linked Cy3-DNA constructs

Photophysical measurements are reported for Cy3-DNA constructs in which both Cy3 nitrogen atoms are attached to the DNA backbone by short linkers. While this linking was thought to rigidify the orientation of the dye and hinder cis-isomerization, the relatively low fluorescence quantum yield and the presence of a short component in the time-resolved fluorescence decay of the dye indicated that cis-isomerization remained possible. Fluorescence correlation spectroscopy and transient absorption experiments showed that photoisomerization occurred with high efficiency. Molecular dynamics simulations of the trans dye system indicated the presence of stacked and unstacked states, and free energy simulations showed that the barriers for stacking/unstacking were low. In addition, simulations showed that the ground cis state was feasible without DNA distortions. Based on these observations, a model is put forward in which the doubly linked dye can photoisomerize in the unstacked state.

Indocyanine dyes approach free rotation at the 3' terminus of A-RNA: a comparison with the 5' terminus and consequences for fluorescence resonance energy transfer

Cyanine dyes are widely used to study the folding and structural transformations of nucleic acids using fluorescence resonance energy transfer (FRET). The extent to which FRET can be used to extract inter- and intramolecular distances has been the subject of considerable debate in the literature; the contribution of dye and linker dynamics to the observed FRET signal is particularly troublesome. We used molecular dynamics (MD) simulations to study the dynamics of the indocarbocyanine dyes Cy3 and Cy5 attached variously to the 3' or 5' terminal bases of a 16-base-pair RNA duplex. We then used Monte Carlo modeling of dye photophysics to predict the results of single-molecule-sensitive FRET measurements of these same molecules. Our results show that the average value of FRET depends on both the terminal base and the linker position. In particular, 3' attached dyes typically explore a wide region of configuration space, and the relative orientation factor, κ(2), has a distribution that approaches that of free-rotators. This is in contrast to 5' attached dyes, which spend a significant fraction of their time in one or more configurations that are effectively stacked on the ends of the RNA duplex. The presence of distinct dye configurations for 5' attached dyes is consistent with observations, made by others, of multiple fluorescence lifetimes of Cy3 on nucleic acids. Although FRET is frequently used as a molecular "ruler" to measure intramolecular distances, the unambiguous measurement of distances typically relies on the assumption that the rotational degrees of freedom of the dyes can be averaged out and that the donor lifetime in the absence of the acceptor is a constant. We demonstrate that even for the relatively free 3' attached dyes, the correlation time of κ(2) is still too long to justify the use of a free-rotation approximation. We further explore the consequences of multiple donor lifetimes on the predicted value of FRET.

Ultrafast fluorescence quenching dynamics of Atto655 in the presence of N-acetyltyrosine and N-acetyltryptophan in aqueous solution: proton-coupled electron transfer versus electron transfer

We studied the ultrafast fluorescence quenching dynamics of Atto655 in the presence of N-acetyltyrosine (AcTyr) and N-acetyltryptophan (AcTrp) in aqueous solution with femtosecond transient absorption spectroscopy. We found that the charge-transfer rate between Atto655 and AcTyr is about 240 times smaller than that between Atto655 and AcTrp. The pH value and D2O dependences of the excited-state decay kinetics of Atto655 in the presence of AcTyr and AcTrp reveal that the quenching of Atto655 fluorescence by AcTyr in aqueous solution is via a proton-coupled electron-transfer (PCET) process and that the quenching of Atto655 fluorescence by AcTrp in aqueous solution is via an electron-transfer process. With the version of the semiclassical Marcus ET theory, we derived that the electronic coupling constant for the PCET reaction between Atto655 and AcTyr in aqueous solution is 8.3 cm(-1), indicating that the PCET reaction between Atto655 and AcTyr in aqueous solution is nonadiabatic.

Mapping the thermal behavior of DNA origami nanostructures

Understanding the thermodynamic properties of complex DNA nanostructures, including rationally designed two- and three-dimensional (2D and 3D, respectively) DNA origami, facilitates more accurate spatiotemporal control and effective functionalization of the structures by other elements. In this work fluorescein and tetramethylrhodamine (TAMRA), a Förster resonance energy transfer (FRET) dye pair, were incorporated into selected staples within various 2D and 3D DNA origami structures. We monitored the temperature-dependent changes in FRET efficiency that occurred as the dye-labeled structures were annealed and melted and subsequently extracted information about the associative and dissociative behavior of the origami. In particular, we examined the effects of local and long-range structural defects (omitted staple strands) on the thermal stability of common DNA origami structures. The results revealed a significant decrease in thermal stability of the structures in the vicinity of the defects, in contrast to the negligible long-range effects that were observed. Furthermore, we probed the global assembly and disassembly processes by comparing the thermal behavior of the FRET pair at several different positions. We demonstrated that the staple strands located in different areas of the structure all exhibit highly cooperative hybridization but have distinguishable melting temperatures depending on their positions. This work underscores the importance of understanding fundamental aspects of the self-assembly of DNA nanostructures and can be used to guide the design of more complicated DNA nanostructures, to optimize annealing protocol and manipulate functionalized DNA nanostructures.

Analysis of duplex unwinding by RNA helicases using stopped-flow fluorescence spectroscopy

The characterization of unwinding reactions by RNA helicases often requires the determination of rate constants that are too fast to be measured by traditional, manual gel-based methods. Stopped-flow fluorescence measurements allow access to fast unwinding rate constants. In this chapter, we outline strategies and experimental considerations for the design of stopped-flow fluorescence experiments to monitor duplex unwinding by RNA helicases, with focus on DEAD-box helicases. We discuss advantages, disadvantages, and technical considerations for stopped-flow approaches, as well as substrate design. In addition, we list protocols and explain functional information obtained with these experiments.

Advances in quantitative FRET-based methods for studying nucleic acids

Förster resonance energy transfer (FRET) is a powerful tool for monitoring molecular distances and interactions at the nanoscale level. The strong dependence of transfer efficiency on probe separation makes FRET perfectly suited for "on/off" experiments. To use FRET to obtain quantitative distances and three-dimensional structures, however, is more challenging. This review summarises recent studies and technological advances that have improved FRET as a quantitative molecular ruler in nucleic acid systems, both at the ensemble and at the single-molecule levels.

Ultrafast excited state deactivation of doped porous anodic alumina membranes

Free-standing, bi-directionally permeable and ultra-thin anodic aluminum oxide (AAO) membranes establish attractive templates (host) for the synthesis of nano-dots and rods of various materials (guest). This is due to their chemical and structural integrity and high periodicity on length scales of 5-150 nm which are often used to host photoactive nano-materials for various device applications including dye-sensitized solar cells. In the present study, AAO membranes are synthesized by using electrochemical methods and a detailed structural characterization using FEG-SEM, XRD and TGA confirms the porosity and purity of the material. Defect-mediated photoluminescence quenching of the porous AAO membrane in the presence of an electron accepting guest organic molecule (benzoquinone) is studied by means of steady-state and picosecond/femtosecond-resolved luminescence measurements. Using time-resolved luminescence transients, we have also revealed light harvesting of complexes of porous alumina impregnated with inorganic quantum dots (Maple Red) or gold nanowires. Both the Förster resonance energy transfer and the nano-surface energy transfer techniques are employed to examine the observed quenching behavior as a function of the characteristic donor-acceptor distances. The experimental results will find their relevance in light harvesting devices based on AAOs combined with other materials involving a decisive energy/charge transfer dynamics.

Towards characterization of DNA structure under physiological conditions in vivo at the single-molecule level using single-pair FRET

Fluorescence resonance energy transfer (FRET) under in vivo conditions is a well-established technique for the evaluation of populations of protein bound/unbound nucleic acid (NA) molecules or NA hybridization kinetics. However, in vivo FRET has not been applied to in vivo quantitative conformational analysis of NA thus far. Here we explored parameters critical for characterization of NA structure using single-pair (sp)FRET in the complex cellular environment of a living Escherichia coli cell. Our measurements showed that the fluorophore properties in the cellular environment differed from those acquired under in vitro conditions. The precision for the interprobe distance determination from FRET efficiency values acquired in vivo was found lower (∼31%) compared to that acquired in diluted buffers (13%). Our numerical simulations suggest that despite its low precision, the in-cell FRET measurements can be successfully applied to discriminate among various structural models. The main advantage of the in-cell spFRET setup presented here over other established techniques allowing conformational analysis in vivo is that it allows investigation of NA structure in various cell types and in a native cellular environment, which is not disturbed by either introduced bulk NA or by the use of chemical transfectants.

"DNA traffic lights": concept of wavelength-shifting DNA probes and application in an aptasensor

Add it and see it: The concept of "DNA traffic lights" for wavelength-shifting DNA probes has a great potential in the application of biosensors, for example, in DNA aptamers. A visual color change in the DNA aptasensor fluorescence from green to red occurs after specific target binding.

DNA-controlled excitonic switches

Fluorescence resonance energy transfer (FRET) is a promising means of enabling information processing in nanoscale devices, but dynamic control over exciton pathways is required. Here, we demonstrate the operation of two complementary switches consisting of diffusive FRET transmission lines in which exciton flow is controlled by DNA. Repeatable switching is accomplished by the removal or addition of fluorophores through toehold-mediated strand invasion. In principle, these switches can be networked to implement any Boolean function.

The structure of sulfoindocarbocyanine 3 terminally attached to dsDNA via a long, flexible tether

Fluorescence resonance energy transfer (FRET) is an important source of long-range distance information in macromolecules. However, extracting maximum information requires knowledge of fluorophore, donor and acceptor, positions on the macromolecule. We previously determined the structure of the indocarbocyanine fluorophores Cy3 and Cy5 attached to DNA via three-carbon atom tethers, showing that they stacked onto the end of the helix in a manner similar to an additional basepair. Our recent FRET study has suggested that when they are attached via a longer 13-atom tether, these fluorophores are repositioned relative to the terminal basepair by a rotation of ∼30°, while remaining stacked. In this study, we have used NMR to extend our structural understanding to the commonly used fluorophore sulfoindocarbocyanine-3 (sCy3) attached to the 5'-terminus of the double-helical DNA via a 13-atom flexible tether (L13). We find that L13-sCy3 remains predominantly stacked onto the end of the duplex, but adopts a significantly different conformation, from that of either Cy3 or Cy5 attached by 3-atom tethers, with the long axes of the fluorophore and the terminal basepair approximately parallel. This result is in close agreement with our FRET data, supporting the contention that FRET data can be used to provide orientational information.

Orientation of cyanine fluorophores terminally attached to DNA via long, flexible tethers

Cyanine fluorophores are commonly used in single-molecule FRET experiments with nucleic acids. We have previously shown that indocarbocyanine fluorophores attached to the 5'-termini of DNA and RNA via three-carbon atom linkers stack on the ends of the helix, orienting their transition moments. We now investigate the orientation of sulfoindocarbocyanine fluorophores tethered to the 5'-termini of DNA via 13-atom linkers. Fluorescence lifetime measurements of sulfoindocarbocyanine 3 attached to double-stranded DNA indicate that the fluorophore is extensively stacked onto the terminal basepair at 15 °C, with properties that depend on the terminal sequence. In single molecules of duplex DNA, FRET efficiency between sulfoindocarbocyanine 3 and 5 attached in this manner is modulated with helix length, indicative of fluorophore orientation and consistent with stacked fluorophores that can undergo lateral motion. We conclude that terminal stacking is an intrinsic property of the cyanine fluorophores irrespective of the length of the tether and the presence or absence of sulfonyl groups. However, compared to short-tether indocarbocyanine, the mean rotational relationship between the two fluorophores is changed by ∼60° for the long-tether sulfoindocarbocyanine fluorophores. This is consistent with the transition moments becoming approximately aligned with the long axis of the terminal basepair for the long-linker species.

Synthesis and properties of oligonucleotides carrying isoquinoline imidazo[1,2-a]azine fluorescent units

Oligonucleotides carrying novel fluorescent compounds with a dipolar isoquinoline imidazo[1,2-a]azine core were prepared. Analysis of the melting curves demonstrates that DNA duplexes carrying these fluorescent labels at their ends have a slight increase in DNA duplex stability. The UV absorption and fluorescent properties of the oligonucleotide conjugates were analyzed. The fluorescent label is sensitive to duplex formation, as cooperative melting curves are also observed at 366 nm and fluorescence has a large increase upon denaturation. Cell uptake studies allow observation of these fluorescently labeled oligonucleotides internalized into HeLa cells.

Diffraction techniques in structural biology

A detailed understanding of chemical and biological function and the mechanisms underlying the molecular activities ultimately requires atomic-resolution structural data. Diffraction-based techniques such as single-crystal X-ray crystallography, electron microscopy, and neutron diffraction are well established and they have paved the road to the stunning successes of modern-day structural biology. The major advances achieved in the last 20 years in all aspects of structural research, including sample preparation, crystallization, the construction of synchrotron and spallation sources, phasing approaches, and high-speed computing and visualization, now provide specialists and nonspecialists alike with a steady flow of molecular images of unprecedented detail. The present unit combines a general overview of diffraction methods with a detailed description of the process of a single-crystal X-ray structure determination experiment, from chemical synthesis or expression to phasing and refinement, analysis, and quality control. For novices it may serve as a stepping-stone to more in-depth treatises of the individual topics. Readers relying on structural information for interpreting functional data may find it a useful consumer guide.

New strategy for the synthesis of chemically modified RNA constructs exemplified by hairpin and hammerhead ribozymes

The CuAAC reaction (click chemistry) has been used in conjunction with solid-phase synthesis to produce catalytically active hairpin ribozymes around 100 nucleotides in length. Cross-strand ligation through neighboring nucleobases was successful in covalently linking presynthesized RNA strands with high efficiency (trans-ligation). In an alternative strategy, intrastrand click ligation was employed to produce a functional hammerhead ribozyme containing a novel nucleic acid backbone mimic at the catalytic site (cis-ligation). The ability to synthesize long RNA strands by a combination of solid-phase synthesis and click ligation is an important addition to RNA chemistry. It is compatible with a plethora of site-specific modifications and is applicable to the synthesis of many biologically important RNA molecules.

Multivector fluorescence analysis of the xpt guanine riboswitch aptamer domain and the conformational role of guanine

Purine riboswitches are RNA regulatory elements that control purine metabolism in response to intracellular concentrations of the purine ligands. Conformational changes of the guanine riboswitch aptamer domain induced by guanine binding lead to transcriptional regulation of genes involved in guanine biosynthesis. The guanine riboswitch aptamer domain has three RNA helices designated P1, P2, and P3. An overall model for the Mg²⁺- and guanine-dependent relative orientations and dynamics of P1, P2, and P3 has not been reported, and the conformational role of guanine under physiologically relevant conditions has not been fully elucidated. In this study, an ensemble and single-molecule fluorescence resonance energy transfer (FRET) study was performed on three orthogonally labeled variants of the xpt guanine riboswitch aptamer domain. The combined FRET data support a model in which the unfolded state of the aptamer domain has a highly dynamic P2 helix that switches rapidly between two orientations relative to nondynamic P1 and P3. At ≪1 mM Mg²⁺ (in the presence of a saturating level of guanine) or ≥1 mM Mg²⁺ (in the absence of guanine), the riboswitch starts to adopt a folded conformation in which loop−loop interactions lock P2 and P3 into place. At >5 mM Mg²⁺, further compaction occurs in which P1 more closely approaches P3. Our data help to explain the biological role of guanine as stabilizing the globally folded aptamer domain conformation at physiologically relevant Mg²⁺ concentrations (≤1 mM), whereas in the absence of guanine, much higher Mg²⁺ concentrations are required to induce this folding event.

Analysis of the self-assembly of 4x4 DNA tiles by temperature-dependent FRET spectroscopy

Correct and efficient self-assembly of oligonucleotides into highly ordered superstructures essentially depends on the structural integrity and thermal stability of DNA motifs such as junctions or tiles that build up the superstructure. To investigate the assembly/disassembly process of DNA tiles, we recently described a microplate-based method employing Förster resonance energy transfer (FRET) spectroscopy, which enables the analysis of DNA superstructure formation in real time and with high throughput. This method allows thermodynamic parameters of the self-assembly process to be extracted, and we here apply it for detailed analysis of the self-assembly of five different 4x4 DNA tile motifs. To specifically investigate whether the FRET probes tethered to the DNA motifs report local thermodynamic stabilities in the immediate proximity of the chromophores, or whether the global stability of the entire motif is monitored, systematic variations of the labeling position within one tile are carried out. Combined with gel electrophoretic, UV spectroscopic, and microcalorimetric analysis, this study reveals that the FRET method mainly reports the thermodynamics of local microenvironment assembly, rather than that of the entire motif. Nonetheless, the thermodynamic data derived from FRET analysis are also influenced by the structural surroundings of the motif, and thus rapid and detailed analysis and identification of potential "weak points" within a superstructure which influence the structural integrity of a given tile design are enabled. Therefore, the microplate FRET method readily provides insights into the assembly process of complex DNA superstructures to verify and complement theoretical design approaches.