Designing metal-peptide models for protein structure and function

Azurin-Derived Peptides: Comparison of Nickel- and Copper-Binding Properties

Metalloproteins are an important class of proteins involved in metal uptake, transport, and electron-transfer reactions. Mimicking the active sites of these proteins through miniaturization is an active area of research with applications in biotechnology and medicine. Azurin is a 128-residue copper-binding cupredoxin protein involved in electron-transfer reactions. Previous studies have reported on the copper-binding-induced spectroscopic and structural properties of peptide loops (11 and 13 residues) from azurin. These azurin peptides exhibited novel stoichiometries. However, the underlying mechanism of fluorescence quenching upon copper binding remains to be understood, whether it is due to electron transfer, energy transfer, or both. Here, we report nickel-binding-associated spectroscopic and structural properties of the azurin peptides. They develop a β-turn upon nickel binding as seen in circular dichroism and exhibit electronic transitions centered at 270 and 450 nm. Unlike copper, which exhibited 1:1 and 1:2 peptide:metal stoichiometries, nickel exhibited only a 1:1 stoichiometry. Tryptophan-containing peptides showed fluorescence quenching upon nickel binding, which is due to electron transfer. These results further suggest that the quenching in copper-bound peptides is also due to electron transfer, which could not be ascertained in previous studies. Overall, azurin peptides provide a platform for studying metal-induced structural and spectroscopic properties using transition-metal ions.

Metal Binding Antimicrobial Peptides in Nanoparticle Bio-functionalization: New Heights in Drug Delivery and Therapy

Peptides are considered very important due to the diversity expressed through their amino acid sequence, structure variation, large spectrum, and their essential role in biological systems. Antimicrobial peptides (AMPs) emerged as a potent tool in therapy owing to their antimicrobial properties but also their ability to trespass the membranes, specificity, and low toxicity. They comprise a variety of peptides from which specific amino acid-rich peptides are of interest to the current review due to their features in metal interaction and cell penetration. Histidine-rich peptides such as Histatins belong to the metal binding salivary residing peptides with efficient antibacterial, antifungal, and wound-healing activities. Furthermore, their ability to activate in acidic environment attracted the attention to their potential in therapy. The current review covers the current knowledge about AMPs and critically assess the potential of associating with metal ions both structurally and functionally. This review provides interesting hints for the advantages provided by AMPs and metal ions in biomedicine, making use of their direct properties in brain diseases therapy or in the creation of new bio-functionalized nanoparticles for cancer diagnosis and treatment.

Isophthaloyl-Based Selective Fluorescence Receptor for Zn (II) Ion in Semi-Aqueous Medium

A novel Isophthaloyl-based symmetrical (12E,21E)-N1',N3'-bis(2-hydroxybenzylidene) isophthalohydrazide, receptor (1) was synthesized and characterized using various spectroscopic technique. The reorganization ability of receptor (1) was evaluated in semi-aqueous medium and shows significant enhancement in fluorescence intensity for Zn (II) ion over various metal ions in CH₃CN:H₂O (1:1, v/v). The 1:2 binding stoichiometry between receptor (1) and Zn (II) ion was established using Job's plot and the proposed complex structure was calculated by applying Density Functional Theory (DFT) method. The binding constant (K_a) of receptor (1) with Zn (II) ion was established with the Benesi-Hildebrand plot, Scatchard and Connor's plot and the values are 1.00 × 10⁴ M^-1, 1.05× 10⁴ M^-1 and 1.05× 10⁴ M^-1 respectively. The limit of detection (LOD) and limit of quantification (LOQ) of receptor (1) and Zn (II) ion was 0.292 μM and 0.974 μM respectively. The binding mode was due to photo-induced electron transfer (PET) and the coordination of Zn (II) ion with C = N hydroxyl group of receptor (1). Electrochemical analysis of metal free receptor (1) and with Zn (II) ion also confirmed the formation of complex.

A new peptide-based fluorescent probe selective for zinc(ii) and copper(ii)

A novel metal ion-sensitive fluorescent peptidyl-probe has been designed based on the most common five-residue repeat in mammalian histidine rich glycoproteins (HRGs). A dansyl-amide moiety at the N-terminus and a tryptophan residue at the C-terminus of the peptide were added as they can act as a FRET (fluorescence resonance energy transfer) pair. The dansyl fluorophore was chosen also because it frequently shows strong CHEF (chelation enhanced fluorescence) and solvatochromic effects. The designed peptide, dansyl-HPHGHW-NH₂ (dH3w), showed a selective fluorescence turn-on response to Zn²⁺ in aqueous solutions at pH 7.0 when excited at both 295 nm and 340 nm, thus indicating that both FRET and CHEF or solvatochromic effects are active in the metal/peptide complex. Steady-state fluorescence and isothermal titration calorimetry (ITC) measurements demonstrated that two peptide molecules bind to one zinc ion with an association constant K_a = 5.7 × 10⁵ M^-1 at 25 °C and pH 7.0. The fluorescence response to Zn²⁺ was not influenced by Pb²⁺, Cd²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Mg²⁺, Ca²⁺, K⁺ and Na⁺ ions and only slightly influenced by Co²⁺ and Ni²⁺. Copper(ii), at concentrations as low as 5 μM, caused a strong quenching of both free and Zn²⁺ complexed dH3w. The determination of the binding parameters for Cu²⁺ has shown that one copper ion binds to one dH3w molecule with an association constant of 1.2 × 10⁶ M^-1 thus confirming the higher affinity of peptide for Cu²⁺ than for Zn²⁺. Finally, we demonstrated that dH3w can penetrate into HeLa cells and could thus be used for the determination of intracellular Zn²⁺ and Cu²⁺ concentrations.

Design and engineering of artificial oxygen-activating metalloenzymes

Many efforts are being made in the design and engineering of metalloenzymes with catalytic properties fulfilling the needs of practical applications. Progress in this field has recently been accelerated by advances in computational, molecular and structural biology. This review article focuses on the recent examples of oxygen-activating metalloenzymes, developed through the strategies of de novo design, miniaturization processes and protein redesign. Considerable progress in these diverse design approaches has produced many metal-containing biocatalysts able to adopt the functions of native enzymes or even novel functions beyond those found in Nature.

Design, Preparation, and Characterization of Zn and Cu Metallopeptides Based On Tetradentate Aminopyridine Ligands Showing Enhanced DNA Cleavage Activity

The conjugation of redox-active complexes that can function as chemical nucleases to cationic tetrapeptides is pursued in this work in order to explore the expected synergistic effect between these two elements in DNA oxidative cleavage. Coordination complexes of biologically relevant first row metal ions, such as Zn(II) or Cu(II), containing the tetradentate ligands 1,4-dimethyl-7-(2-pyridylmethyl)-1,4,7-triazacyclononane ((Me2)PyTACN) and (2S,2S')-1,1'-bis(pyrid-2-ylmethyl)-2,2'-bipyrrolidine ((S,S')-BPBP) have been linked to a cationic LKKL tetrapeptide sequence. Solid-phase synthesis of the peptide-tetradentate ligand conjugates has been developed, and the preparation and characterization of the corresponding metallotetrapeptides is described. The DNA cleavage activity of Cu and Zn metallopeptides has been evaluated and compared to their metal binding conjugates as well as to the parent complexes and ligands. Very interestingly, the oxidative Cu metallopeptides 1Cu and 2Cu show an enhanced activity compared to the parent complexes, [Cu(PyTACN)](2+) and [Cu(BPBP)](2+), respectively. Under optimized conditions, 1Cu displays an apparent pseudo first-order rate constant (kobs) of ∼0.16 min(-1) with a supercoiled DNA half-life time (t1/2) of ∼4.3 min. On the other hand, kobs for 2Cu has been found to be ∼0.11 min(-1) with t1/2 ≈ 6.4 min. Hence, these results point out that the DNA cleavage activities promoted by the metallopeptides 1Cu and 2Cu render ∼4-fold and ∼23 rate accelerations in comparison with their parent Cu complexes. Additional binding assays and mechanistic studies demonstrate that the enhanced cleavage activities are explained by the presence of the cationic LKKL tetrapeptide sequence, which induces an improved binding affinity to the DNA, thus bringing the metal ion, which is responsible for cleavage, in close proximity.

Functional, metal-based crosslinkers for α-helix induction in short peptides

Many protein-protein interactions that play a central role in cellular processes involve α-helical domains. Consequently, there has been great interest in developing strategies for stabilizing short peptides in α-helical conformations toward the inhibition and interrogation of protein-protein interactions. Here, we show that tridentate Hybrid Coordination Motifs (HCMs), which consist of a natural (histidine, His) and an unnatural (8-hydroxyquinoline, Quin) metal binding functionality, can bind divalent metal ions with high affinity and thereby induce/stabilize an α-helical configuration in short peptide sequences. The Quin functionality is readily introduced onto peptide platforms both during or after solid-state peptide synthesis, demonstrating the preparative versatility of HCMs. A systematic study involving a series of HCM-bearing peptides has revealed the critical importance of the length of the linkage between the Quin moiety and the peptide backbone as well as the metal coordination geometry in determining the extent of α-helix induction. Through ZnII coordination or modification with ReI(Quin)(CO)3, the HCM-bearing peptides can be rendered luminescent in the visible region, thus showing that HCMs can be exploited to simultaneously introduce structure and functionality into short peptides.

Palladium-mediated intracellular chemistry

Many important intracellular biochemical reactions are modulated by transition metals, typically in the form of metalloproteins. The ability to carry out selective transformations inside a cell would allow researchers to manipulate or interrogate innumerable biological processes. Here, we show that palladium nanoparticles trapped within polystyrene microspheres can enter cells and mediate a variety of Pd(0)-catalysed reactions, such as allylcarbamate cleavage and Suzuki-Miyaura cross-coupling. The work provides the basis for the customization of heterogeneous unnatural catalysts as tools to carry out artificial chemistries within cells. Such in cellulo synthesis has potential for a plethora of applications ranging from cellular labelling to synthesis of modulators or inhibitors of cell function.

Design of lanthanide fingers: compact lanthanide-binding metalloproteins

Lanthanides have interesting chemical properties; these include luminescent, magnetic, and catalytic functions. Toward the development of proteins incorporating novel functions, we have designed a new lanthanide-binding motif, lanthanide fingers. These were designed based on the Zif268 zinc finger, which exhibits a beta beta alpha structural motif. Lanthanide fingers utilize an Asp(2)Glu(2) metal-coordination environment to bind lanthanides through a tetracarboxylate peptide ligand. The iterative design of a general lanthanide-binding peptide incorporated the following key elements: 1) residues with high alpha-helix and beta-sheet propensities in the respective secondary structures; 2) an optimized big box alpha-helix N-cap; 3) a Schellman alpha-helix C-cap motif; and 4) an optional D-Pro-Ser type II' beta-turn in the beta-hairpin. The peptides were characterized for lanthanide binding by circular dichroism (CD), NMR, and fluorescence spectroscopy. In all instances, stabilization of the peptide secondary structures resulted in an increase in metal affinity. The optimized protein design was a 25-residue peptide that was a general lanthanide-binding motif; this binds all lanthanides examined in a competitive aqueous environment, with a dissociation constant of 9.3 microM for binding Er(3+). CD spectra of the peptide-lanthanide complexes are similar to those of zinc fingers and other beta beta alpha proteins. Metal binding involves residues from the N-terminal beta-hairpin and the C terminal alpha-helical segments of the peptide. NMR data indicated that metal binding induced a global change in the peptide structure. The D-Pro-Ser type II' beta-turn motif could be replaced by Thr-Ile to generate genetically encodable lanthanide fingers. Replacement of the central Phe with Trp generated genetically encodable lanthanide fingers that exhibited terbium luminescence greater than that of an EF-hand peptide.

The gramicidin dimer shows both EX1 and EX2 mechanisms of H/D exchange

We describe the use of H/D amide exchange and electrospray ionization mass spectrometry to study, in organic solvents, the pentadecapeptide gramicidin as a model for protein self association. In methanol-OD, all active H's in the peptide exchange for D within 5 min, indicating a monomer/dimer equilibrium that is shifted towards the fast-exchanging monomer. H/D exchange in n-propanol-OD, however, showed a partially protected gramicidin that slowly converts to a second species that exchanges nearly all the active hydrogens, indicating EX1 kinetics for the H/D exchange. We propose that this behavior is the result of the slower rate of unfolding in n-propanol compared with that in methanol. The rate constant for the unfolding of the dimer is the rate of disappearance of the partially protected species, and it agrees within a factor of two with a value reported in literature. The rate constant of dimer refolding can be determined from the ratio of the rate constant for unfolding and the affinity constant for the dimer, which we determined in an earlier study. The unfolding activation energy is 20 kcal mol(-1), determined by performing the exchange experiments as a function of temperature. To study gramicidin in an even more hydrophobic medium than n-propanol, we measured its H/D exchange kinetics in a phospholipids vesicle and found a different H/D amide exchange behavior. Gramicidin is an unusual peptide dimer that can exhibit both EX1 and EX2 mechanisms for its H/D exchange, depending on the solvent.

Peptides grafted from solids for the control of interfacial properties

We have used solid-phase peptide synthesis to graft a peptide monolayer from a solid in order to modify the interfacial properties. We grafted a 15-residue peptide, EKEKEKEKEKEKEGG, containing a zwitterionic sequence of alternating lysine and glutamic acid residues from the surface of an aminosilanized silicon wafer by placing the silicon wafer within a commercial microwave peptide synthesizer. Such synthesizers are routinely used to make peptides on porous beads, but the peptides are subsequently cleaved and used independently of the solid support; our aim is to utilize the covalently bound peptide to control the surface properties without the need for cleavage and reattachment. We confirmed the presence of this peptide layer on the surface by X-ray photoelectron spectroscopy and ellipsometry. Atomic force microscopy was then used to study the forces between the peptide-modified surface and a borosilicate glass sphere as a function of the solution pH. The adsorbed peptide makes the silicon wafer pH responsive: at high pH the glass particle is repelled from the wafer, and at low pH it is attracted. Previous studies with synthetic polymers have shown that the "grafting from" method allows a much higher film density than "grafting to". We propose that the application of grafting from strategies to peptide layers may offer three additional benefits: (1) the film density can be controlled independently of the primary sequence of the peptide, (2) the sequence constraints for spontaneous adsorption are removed, and (3) the procedure is fast and efficient, which may lead to lower costs and the ability for high-throughput surface biofunctionalization. Moreover, peptide layers offer increased sequence diversity, control, and functionality compared to conventional polymer brushes.

New redesigned zinc-finger proteins: design strategy and its application

The design of DNA-binding proteins for the specific control of the gene expression is one of the big challenges for several research laboratories in the post-genomic era. An artificial transcription factor with the desired DNA binding specificity could work as a powerful tool and drug to regulate the target gene. The zinc-finger proteins, which typically contain many fingers linked in a tandem fashion, are some of the most intensively studied DNA-binding proteins. In particular, the Cys(2)His(2)-type zinc finger is one of the most common DNA-binding motifs in eukaryotes. A simple mode of DNA recognition by the Cys(2)His(2)-type zinc-finger domain provides an ideal framework for designing proteins with new functions. Our laboratory has utilized several design strategies to create new zinc-finger peptides/proteins by redesigning the Cys(2)His(2)-type zinc-finger motif. This review focuses on the aspects of design strategies, mainly from our recent results, for the creation of artificial zinc-finger proteins, and discusses the possible application of zinc-finger technology for gene regulation and gene therapy.

Dissecting the General Physicochemical Properties of Noncovalent Interactions Involving Tyrosine Side Chain as a Second-Shell Ligand in Biomolecular Metal-Binding Site Mimetics: An Experimental Study Combining Fluorescence,13C NMR Spectroscopy and ESI Mass Spectrometry

Detailed physicochemical features inherent in the dynamic cation-pi interactions of aromatic amino acid side chains in the secondary coordination spheres around metal ions were extracted and mapped by intrinsic tyrosine fluorescence titration experiments with two homologous, artificially engineered metal-binding scaffolds which mimic metal-binding sites in metalloproteins. A newly formulated method for the treatment of fluorescence titration data allows straightforward assessment of both the magnitudes and properties of metal-chelation-assisted cation-aromatic interactions (K2) underlying a proposed two-step metallosupramolecular association process. The unprecedented linear platform-motif correlations between the two contrasting scaffolds in their changes in tyrosine fluorescence on binding of 3d metal cations help to elucidate the properties of general cation-arene recognition corresponding to the metal-responsive characteristics of the second-shell Tyr residue surrounding the metal-binding sites in the supramolecular context, and thereby define a new noncovalent design principle for metal-ion recognition in aqueous solution. As supported by NMR spectroscopic and ESI-MS analyses and molecular mechanics force field calculations, the systematic study exemplifies the concept of using steady-state tyrosine fluorescence as a powerful tool for comprehensive descriptions of cation-pi interactions in the extended environment of a metal-binding site. We established that the physicochemical properties pertaining to indirect metal-arene interactions are highly dependent on the electronic properties of the metal ions. This work suggests that second-shell cation-pi interactions may play more diverse roles, including modulation of structure, reactivity, and function of metal-binding sites, than the previously well-established direct cation-pi interactions involving hard cations (e.g., alkali metal ions). Moreover, such a study will continue to complement theoretical predications and/or the early experimental investigations in organic solvents.

Model peptides based on the binding loop of the copper metallochaperone Atx1: selectivity of the consensus sequence MxCxxC for metal ions Hg(II), Cu(I), Cd(II), Pb(II), and Zn(II)

The amino acid sequence MxCxxC is conserved in many soft-metal transporters that are involved in the control of the intracellular concentration of ions such as Cu(I), Hg(II), Zn(II), Cd(II), and Pb(II). A relevant task is thus the selectivity of the motif MxCxxC for these different metal ions. To analyze the coordination properties and the selectivity of this consensus sequence, we have designed two model peptides that mimic the binding loop of the copper chaperone Atx1: the cyclic peptide P(C) c(GMTCSGCSRP) and its linear analogue P(L) (Ac-MTCSGCSRPG-NH2). By using complementary analytical and spectroscopic methods, we have demonstrated that 1:1 complexes are obtained with Cu(I) and Hg(II), whereas 1:1 and 1:2 (M:P) species are successively formed with Zn(II), Cd(II), and Pb(II). The complexation properties of the cyclic and linear peptides are very close, but the cyclic compound provides systematically higher affinity constants than its unstructured analogue. The introduction of a xPGx motif that forms a type II beta turn in P(C) induces a preorganization of the binding loop of the peptide that enhances the stabilities of the complexes (up to 2 orders of magnitude difference for the Hg complexes). The affinity constants were measured in the absence of any reducing agent that would compete with the peptides and range in the order Hg(II) > Cu(I) >> Cd(II) > Pb(II) > Zn(II). This sequence is thus highly selective for Cu(I) compared to the essential ion Zn(II) that could compete in vivo or compared to the toxic ions Cd(II) and Pb(II). Only Hg(II) may be an efficient competitor of Cu(I) for binding to the MxCxxC motif in metalloproteins.

Femtomolar Zn(II) affinity in a peptide-based ligand designed to model thiolate-rich metalloprotein active sites

Metal-ligand interactions are critical components of metalloprotein assembly, folding, stability, electrochemistry, and catalytic function. Research over the past 3 decades on the interaction of metals with peptide and protein ligands has progressed from the characterization of amino acid-metal and polypeptide-metal complexes to the design of folded protein scaffolds containing multiple metal cofactors. De novo metalloprotein design has emerged as a valuable tool both for the modular synthesis of these complex metalloproteins and for revealing the fundamental tenets of metalloprotein structure-function relationships. Our research has focused on using the coordination chemistry of de novo designed metalloproteins to probe the interactions of metal cofactors with protein ligands relevant to biological phenomena. Herein, we present a detailed thermodynamic analysis of Fe(II), Co(II), Zn(II), and[4Fe-4S]2(+/+) binding to IGA, a 16 amino acid peptide ligand containing four cysteine residues, H2N-KLCEGG-CIGCGAC-GGW-CONH2. These studies were conducted to delineate the inherent metal-ion preferences of this unfolded tetrathiolate peptide ligand as well as to evaluate the role of the solution pH on metal-peptide complex speciation. The [4Fe-4S]2(+/+)-IGA complex is both an excellent peptide-based synthetic analogue for natural ferredoxins and is flexible enough to accommodate mononuclear metal-ion binding. Incorporation of a single ferrous ion provides the FeII-IGA complex, a spectroscopic model of a reduced rubredoxin active site that possesses limited stability in aqueous buffers. As expected based on the Irving-Williams series and hard-soft acid-base theory, the Co(II) and Zn(II) complexes of IGA are significantly more stable than the Fe(II) complex. Direct proton competition experiments, coupled with determinations of the conditional dissociation constants over a range of pH values, fully define the thermodynamic stabilities and speciation of each MII-IGA complex. The data demonstrate that FeII-IGA and CoII-IGA have formation constant values of 5.0 x 10(8) and 4.2 x 10(11) M-1, which are highly attenuated at physiological pH values. The data also evince that the formation constant for ZnII-IGA is 8.0 x 10(15) M-1, a value that exceeds the tightest natural protein Zn(II)-binding affinities. The formation constant demonstrates that the metal-ligand binding energy of a ZnII(S-Cys)4 site can stabilize a metalloprotein by -21.6 kcal/mol. Rigorous thermodynamic analyses such as those demonstrated here are critical to current research efforts in metalloprotein design, metal-induced protein folding, and metal-ion trafficking.

Metalloprotein and metallo-DNA/RNAzyme design: current approaches, success measures, and future challenges

Specific metal-binding sites have been found in not only proteins but also DNA and RNA molecules. Together these metalloenzymes consist of a major portion of the enzyme family and can catalyze some of the most difficult biological reactions. Designing these metalloenzymes can be both challenging and rewarding because it can provide deeper insights into the structure and function of proteins and cheaper and more stable alternatives for biochemical and biotechnological applications. Toward this goal, both rational and combinatorial approaches have been used. The rational approach is good for designing metalloenzymes that are well characterized, such as heme proteins, while the combinatorial approach is better at designing those whose structures are poorly understood, such as metallo-DNA/RNAzymes. Among the rational approaches, de novo design is at its best when metal-binding sites reside in a scaffold whose structure has been designed de novo (e.g., alpha-helical bundles). Otherwise, design using native scaffolds can be equally effective, allowing more choices of scaffolds whose structural stability is often more resistant to multiple mutations. In addition, computational and empirical designs have both enjoyed successes. Because of the limitation in defining structural parameters for metal-binding sites, a computational approach is restricted to mostly metal-binding sites that are well defined, such as mono- or homonuclear centers. An empirical approach, even though it is less restrictive in the metal-binding sites to be designed, depends heavily on one's knowledge and choice of templates and targets. An emerging approach is a combination of both computational and empirical approaches. The success of these approaches can be measured not only by three-dimensional structural comparison between the designed and target enzymes but also by the total amount of insight obtained from the design process and studies of the designed enzymes. One of the biggest advantages of designed metalloenzymes is the potential of placing two different metal-binding sites in the same protein framework for comparison. A final measure of success is how one can utilize the insight gained from the intellectual exercise to design new metalloenzymes, including those with unprecedented structures and functions. Future challenges include designing more complex metalloenzymes such as heteronuclear metal centers with strong nanomolar or better affinities. A key to meeting this challenge is to focus on the design of not only primary but also secondary coordination spheres using a combination of improved computer programs, experimental design, and high-resolution crystallography.

Incorporating electron-transfer functionality into synthetic metalloproteins from the bottom-up

The alpha-helical coiled-coil motif serves as a robust scaffold for incorporating electron-transfer (ET) functionality into synthetic metalloproteins. These structures consist of a supercoiling of two or more aplha helices that are formed by the self-assembly of individual polypeptide chains whose sequences contain a repeating pattern of hydrophobic and hydrophilic residues. Early work from our group attached abiotic Ru-based redox sites to the most surface-exposed positions of two stranded coiled-coils and used electron-pulse radiolysis to study both intra- and intermolecular ET reactions in these systems. Later work used smaller metallopeptides to investigate the effects of conformational gating within electrostatic peptide-protein complexes. We have recently designed the C16C19-GGY peptide, which contains Cys residues located at both the "a" and "d" positions of its third heptad repeat in order to construct a nativelike metal-binding domain within its hydrophobic core. It was shown that the binding of both Cd(II) and Cu(I) ions induces the peptide to undergo a conformational change from a disordered random coil to a metal-bridged coiled-coil. However, whereas the Cd(II)-protein exists as a two-stranded coiled-coil, the Cu(I) derivative exists as a four-stranded coiled-coil. Upon the incorporation of other metal ions, metal-bridged peptide dimers, tetramers, and hexamers are formed. The Cu(I)-protein is of particular interest because it exhibits a long-lived (microsecond) room-temperature luminescence at 600 nm. The luminophore in this protein is thought to be a multinuclear CuI4Cys4(N/O)4 cage complex, which can be quenched by exogenous electron acceptors in solution, as shown by emission-lifetime and transient-absorption experiments. It is anticipated that further investigation into these systems will contribute to the expanding effort of bioinorganic chemists to prepare new kinds of functionally active synthetic metalloproteins.

Peptide dendrimers as artificial enzymes, receptors, and drug-delivery agents

The dendritic architecture applied to peptides provides a practical entry into globular macromolecules resembling proteins. A modular design was chosen using a divergent synthesis on solid support alternating proteinogenic alpha-amino acids with branching diamino acids, producing peptide dendrimers with a molecular weight of 3-5 kDa. Initial studies focused on models for hydrolases and produced esterase peptide dendrimers featuring histidine as the key catalytic residue. Variations of amino acid composition and the branching diamino acid led to enantioselective catalysts. Rate accelerations of k(cat)/k(uncat) = 90,000 were obtained when the design was changed to monomeric peptide dendrimers alternating two amino acids with the branching unit. A combinatorial approach was developed allowing for the preparation of large libraries (>60,000 members), which were screened for B12 binding and catalytic activity. The peptide dendrimers were also investigated for drug delivery. Glycopeptide dendrimers conjugated to colchicine selectively inhibited the proliferation of targeted cells, whereas colchicine alone displayed high toxicity.

Synthesis and Activity of Histidine-Containing Catalytic Peptide Dendrimers

Peptide dendrimers built by iteration of the diamino acid dendron Dap-His-Ser (His = histidine, Ser = Serine, Dap = diamino propionic acid) display a strong positive dendritic effect for the catalytic hydrolysis of 8-acyloxypyrene 1,3,6-trisulfonates, which proceeds with enzyme-like kinetics in aqueous medium (Delort, E.; Darbre, T.; Reymond, J.-L. J. Am. Chem. Soc. 2004, 126, 15642-3). Thirty-two mutants of the original third generation dendrimer A3 ((Ac-His-Ser)8(Dap-His-Ser)4(Dap-His-Ser)2Dap-His-Ser-NH2) were prepared by manual synthesis or by automated synthesis with use of a Chemspeed PSW1100 peptide synthesizer. Dendrimer catalysis was specific for 8-acyloxypyrene 1,3,6-trisulfonates, and there was no activity with other types of esters. While dendrimers with hydrophobic residues at the core and histidine residues at the surface only showed weak activity, exchanging serine residues in dendrimer A3 against alanine (A3A), beta-alanine (A3B), or threonine (A3C) improved catalytic efficiency. Substrate binding was correlated with the total number of histidines per dendrimer, with an average of three histidines per substrate binding site. The catalytic rate constant kcat depended on the placement of histidines within the dendrimers and the nature of the other amino acid residues. The fastest catalyst was the threonine mutant A3C ((Ac-His-Thr)8(Dap-His-Thr)4(Dap-His-Thr)2Dap-His-Thr-NH2), with kcat = 1.3 min(-1), kcat/k(uncat) = 90'000, KM = 160 microM for 8-bytyryloxypyrene 1,3,6-trisulfonate, corresponding to a rate acceleration of 18'000 per catalytic site and a 5-fold improvement over the original sequence A3.

A combinatorial approach to minimal peptide models of a metalloprotein active site

Screening of a "one-bead-one-compound" peptide library containing biomimetic His/Cys ligands has led to the discovery of sequences that hydrolyze ester substrates in combination with Zn2+.

Cobalt Ion Mediated Self-Assembly of Genetically Engineered Bacteriophage for Biomimetic Co−Pt Hybrid Material

Biological scaffolds are used for the synthesis of inorganic materials due to their ability to self-assemble and nucleate crystal formation. We report the self-assembly of engineered M13 bacteriophage as a template for Co-Pt crystals. A M13 phage library with an octapeptide library on the major coat protein (pVIII) was used for selection of binders to cobalt ions. Fibrous structures with directionally ordered M13 phage were obtained by interaction with cobalt ions. Co-Pt alloys were synthesized on the fibrous scaffold, and their magnetic properties were characterized. The mineralization showed organized nanoparticles on fibrous bundles. This approach using the phage pVIII library allows for genetic selection that both induces assembly of the phage and directs mineralization of the selected inorganic material.

A Mets Motif Peptide Found in Copper Transport Proteins Selectively Binds Cu(I) with Methionine-Only Coordination

Mets motifs, which refer to methionine-rich sequences found in the high-affinity copper transporter Ctr1, also appear in other proteins involved in copper trafficking and homeostasis, including other Ctrs as well as Pco and Cop proteins isolated from copper-resistant bacteria. To understand the coordination chemistry utilized by these proteins, we studied the copper binding properties of a peptide labeled Mets7-PcoC with the sequence Met-Thr-Gly-Met-Lys-Gly-Met-Ser. By comparing this sequence to a series of mutants containing noncoordinating norleucine in place of methionine, we confirm that all three methionine residues are involved in a thioether-only binding site that is selective for Cu(I). Two independent methods, one based on mass spectrometry and one based on rate differences for the copper-catalyzed oxidation of ascorbic acid, provide an effective K(D) of approximately 2.5 microM at pH 4.5 for the 1:1 complex of Mets7-PcoC with Cu(I). These results establish that a relatively simple peptide containing an MX(2)MX(2)M motif is sufficient to bind Cu(I) with an affinity that corresponds well with its proposed biological function of extracellular copper acquisition.

Metal-induced folding of a designed metalloprotein

The metal-induced assembly of a designed peptide-based rubredoxin model is described. The C16C19-GGY peptide has the sequence Ac-K(IEALEGK)(2)(CEACEGK)(IEALEGK)GGY-amide in which the presence of the Cys-X-X-Cys metal binding domain of rubredoxin was used to place cysteine residues at the hydrophobic "a" and "d" positions upon formation of a homodimeric alpha-helical coiled-coil. Circular dichroism spectroscopy shows that the apopeptide exists as a random coil and assembles into a coiled-coil in the presence of Cd(2+). Metal binding is monitored by the appearance of a new LMCT band at 238 nm. UV-Vis titrations and SDS-PAGE experiments are used to show that this designed metalloprotein exists as a metal-bridged coiled-coil dimer.

Aromatic Interactions in Unusual Backbone Nitrogen-Coordinated Zinc Peptide Complexes: A Crystallographic and Spectroscopic Study

A series of zinc complexes with dipeptide ligands of the type Dpg-Xaa was synthesized, where Dpg is dipicolylglycine and Xaa is phenylalanine (Phe), tyrosine (Tyr), tryptophan (Trp), 2-naphthylalanine (Nal), or glycine (Gly). It was shown that aromatic interactions promote the unusual coordination of an anionic peptide backbone nitrogen atom to zinc. This binding mode was, for the first time, characterized by X-ray structure analyses of the electrically neutral complexes [(Dpg-Phe)(-H)Zn], [(Dpg-Tyr)(-H)Zn], [(Dpg-Trp)(-H)Zn], and [(Dpg-Nal)(-H)Zn]. The pKa values for amide nitrogen deprotonation were determined by 1H NMR titrations {[(Dpg-Phe)Zn], 7.17; [(Dpg-Tyr)Zn], 6.85; [(Dpg-Trp)Zn], 6.85; [(Dpg-Nal)Zn], 6.64; [(Dpg-Gly)Zn], 8.54}. It was calculated that aromatic interactions contribute ca. -8 to -11 kJ/mol of stabilizing free enthalpy changes in the derivatives with aromatic amino acid side chains. These are the first quantitative data obtained for crystallographically characterized metal complexes. A comparison with the literature shows that it is difficult to distinguish between pi-cation attraction and pi-pi stacking. However, it is evident that modification of small peptides with synthetic pyridine ligands enhances their ability to stabilize secondary structures by noncovalent interactions. This is an important consideration for the design of biomimetic metallopeptides.

Understanding metalloprotein folding using a de novo design strategy

Metal ions play significant roles in most biological systems. Over the past two decades, there has been significant interest in the redesign of existing metal binding sites in proteins/peptides and the introduction of metals into folded proteins/peptides. Recent research has focused on the effects of metal binding on the overall secondary and tertiary conformations of unstructured peptides/proteins. In this context, de novo design of metallopeptides has become a valuable approach for studying the consequence of metal binding. It has been seen that metal ions not only direct folding of partially folded peptides but have at times also been the elixir for properly folding random-coil-like structures in stable secondary conformations. Work in our group has focused on binding of heavy metal ions such as Hg(II) to de novo designed alpha-helical three stranded coiled coil peptides with sequences based on the heptad repeat motif. Removal from or addition of a heptad to the parent 30-residue TRI peptide with the amino acid sequence Ac-G(LKALEEK)(4)G-NH(2) generated peptides whose self-aggregation affinities were seen to be dependent on their lengths. It was noted that adjustment in the position of the thiol from an "a" position in the case of the shorter BabyL9C to a "d" position for BabyL12C resulted in a peptide with low association affinities for itself, weaker binding with Hg(II), and a considerably faster kinetic profile for metal insertion. Similar differences in thermodynamic and kinetic parameters were also noted for the longer TRI peptides. At the same time, metal insertion into the prefolded and longer TRI and Grand peptides has clearly demonstrated that the metal binding is both thermodynamically as well kinetically different from that to unassociated peptides.

Catalytic transformations with copper-metalated diglycine conjugates

A series of copper-metalated, water-soluble bis-diglycine conjugates were synthesized and characterized through spectroscopic methods. These conjugates were evaluated for the cleavage of phosphodiester substrates, supercoiled plasmid relaxation in the presence of co-oxidants, and for the oxidation of a diphenolic substrate, 2,6-dimethoxyphenol. Appreciable rate enhancements were observed for these reactions and the oxidative nucleolytic cleavage activity and phenol oxidative coupling was presumably manifested via formation of reactive oxygen species.

Interactions of Alkyltin Salts with Biological Dithiols: Dealkylation and Induction of a Regular β-Turn Structure in Peptides

Organotin compounds specifically target vicinal dithiols, thereby inhibiting the function of essential enzymes. Here, we present the NMR binding studies of trimethyltin (TMT) and dimethyltin (DMT) chlorides with a linear peptide (ILGCWCYLR) derived from the membrane protein stannin (SNN). We show that this peptide is able to dealkylate TMT and bind DMT, adopting a stable type-I beta-turn conformation. Both the NMR data and the calculated structures indicate that the two cysteines coordinate the tin atom in a distorted tetrahedral geometry. The molecular geometries and tin coordination state were confirmed using density functional theory (DFT). In addition, NMR spectral parameters back calculated from the DFT minimized structure compared well with experimental data. These results in conjunction with studies on peptide variants (i.e., C4S, C6S, and Y7F) demonstrate unequivocally the key role of biological dithiols in both the dealkylation and binding of organotin compounds. This peptide serves as a model system for alkyltin-protein interactions and gives new insights into the biological fate of alkyltin compounds.

Comparison of cysteine and penicillamine ligands in a Co(II) maquette

l-Penicillamine (Pen) has been investigated as a ligand for metalloprotein design by examining the binding of Co(II) to the sequence NH(2)-KL(Pen)EGG.(Pen)IG(Pen)GA(Pen).GGW-CONH(2). For comparison, we have studied Co(II) binding to the analogous sequence with Cys ligands, the ferredoxin maquette ligand IGA that was originally designed to bind a [4Fe-4S] cluster. The Co(II) affinity and UV-vis spectroscopic properties of IGA indicate formation of a pseudotetrahedral tetrathiolate ligated Co(II). In contrast, IGA-Pen showed formation of a pseudotetrahedral complex with Co(II) bound by three Pen ligands and an exogenous H(2)O. EXAFS data on both Co(II) complexes confirms not only the proposed primary coordination spheres but also shows six Co(II)-C(beta) methyl group distances in Co(II)-IGA-Pen. These results demonstrate that ligand sterics in simple peptides can be designed to provide asymmetric coordination spheres such as those commonly observed in natural metalloproteins.

Selective Catalysis with Peptide Dendrimers

Peptide dendrimers incorporating 3,5-diaminobenzoic acid 1 as a branching unit (B) were prepared by solid-phase synthesis of ((Ac-A(3))(2)B-A(2))(2)B-Cys-A(1)-NH(2) followed by disulfide bridge formation. Twenty-one homo- and heterodimeric dendrimers were obtained by permutations of aspartate, histidine, and serine at positions A(1), A(2), and A(3). Two dendrimers catalyzed the hydrolysis of 7-hydroxy-N-methyl-quinolinium esters (2-5), and two other dendrimers catalyzed the hydrolysis of 8-hydroxy-pyrene-1,3,6-trisulfonate esters (10-12). Enzyme-like kinetics was observed in aqueous buffer pH 6.0 with multiple turnover, substrate binding (K(M) = 0.1-0.5 mM), rate acceleration (k(cat)/k(uncat) > 10(3)), and chiral discrimination (E = 2.8 for 2-phenylpropionate ester 5). The role of individual amino acids in catalysis was investigated by amino acid exchanges, highlighting the key role of histidine as a catalytic residue, and the importance of electrostatic and hydrophobic interactions in modulating substrate binding. These experiments demonstrate for the first time selective catalysis in peptide dendrimers.

Complementary nucleobase interaction enhances peptide-peptide recognition and self-replicating catalysis

The availability of the complementary interaction of nucleobases for influencing the formation of peptide architectures was explored. Nucleobases were incorporated as additional recognition elements in coiled-coil peptides by employing nucleobase amino acids (NBAs), which are artificial L-alpha-amino gamma-nucleobase-butyric acids. The effect of the base-pair interaction on intermolecular recognition between peptides was evaluated through a self-replication reaction. The self-replication reactions of the peptides with complementary base pairs such as thymine-adenine or guanine-cytosine at the g-g' heptad positions were accelerated in comparison with those of the peptides with mismatched base pairs or without nucleobases. However, thymine-adenine pairs at the e-e' positions did not enhance the self-replication. In the presence of a denaturant, the enhancement effects of complementary base pairs on the reaction disappeared. Thermal denaturation studies showed that the thymine-adenine pairs contributed to stabilization of the coiled-coil structure and that the pairs at the g-g' positions were more effective than those at the e-e' positions. The peptide-peptide interaction was reinforced by complementary nucleobase interactions appropriately arranged in the peptide structure; these led to acceleration of the self-replication reactions.

Cobalt(II) and zinc(II) binding to a ferredoxin maquette

We have examined the Co(II) and Zn(II) affinity of the prototype ferredoxin maquette ligand, NH(2)-KLCEGG.CIACGAC.GGW-CONH2 (IAA), which was originally designed to bind a [4Fe-4S] cluster. UV-Vis spectroscopy demonstrates tight 1:1 complex formation between Co(II) and IAA. The intensity of the S-->Co(II) charge transfer bands at 304 and 340 nm and the ligand field bands between 630 and 728 nm indicate Co(II) coordination by the four cysteine thiolates of IAA in a pseudo-tetrahedral geometry. A dissociation constant value of 5.3 microM was determined for the Co(II)-IAA complex at pH 6.5. Zn(II) readily displaces Co(II) from IAA as evinced by loss of the Co(II) spectral features. The dissociation constant for Zn(II), 20 pM at pH 6.5, was determined be competition experiments with Co(II)-IAA. These results demonstrate that the ferredoxin maquette ligand is an excellent ligand for Zn(II).

Hydrolytic Reaction by Zinc Finger Mutant Peptides: Successful Redesign of Structural Zinc Sites into Catalytic Zinc Sites

To redesign a metal site originally required for the stabilization of a folded protein structure into a functional metal site, we constructed a series of zinc finger mutant peptides such as zf(CCHG) and zf(GCHH), in which one zinc-coordinating residue is substituted into a noncoordinating one. The mutant peptides having water bound to the zinc ion catalyzed the hydrolysis of 4-nitrophenyl acetate as well as the enantioselective hydrolysis of amino acid esters. All the zinc complexes of the mutant peptides showed hydrolytic activity, depending on their peptide sequences. In contrast, the zinc complex of the wild-type, zf(CCHH), and zinc ion alone exhibited no hydrolytic ability. These results clearly indicate that the catalytic abilities are predominantly attributed to the zinc center in the zinc complexes of the mutant peptides. Kinetic studies of the mutant peptides demonstrated that the catalytic hydrolysis is affected by the electron-donating ability of the protein ligands and the coordination environment. In addition, the pH dependence of the hydrolysis strongly suggests that the zinc-coordinated hydroxide ion participates the catalytic reaction. This report is the first successful study of catalytically active zinc finger peptides.

Coordination abilities of the 1-16 and 1-28 fragments of beta-amyloid peptide towards copper(II) ions: a combined potentiometric and spectroscopic study

Stoichiometry, stability constants and solution structures of the copper(II) complexes of the (1-16H), (1-28H), (1-16M), (1-28M), (Ac-1-16H) and (Ac-1-16M) fragments of human (H) and mouse (M) beta-amyloid peptide were determined in aqueous solution in the pH range 2.5-10.5. The potentiometric and spectroscopic data (UV-Vis, CD, EPR) show that acetylation of the amino terminal group induces significant changes in the coordination properties of the (Ac-1-16H) and (Ac-1-16M) peptides compared to the (1-16H) and (1-16M) fragments, respectively. The (Ac-1-16H) peptide forms the 3N [N(Im)(6), N(Im)(13), N(Im)(14)] complex in a wide pH range (5-8), while for the (Ac-1-16M) fragment the 2N [N(Im)(6), N(Im)(14)] complex in the pH range 5-7 is suggested. At higher pH values sequential amide nitrogens are deprotonated and coordinated to copper(II) ions. The N-terminal amino group of the (1-16) and (1-28) fragments of human and mouse beta-amyloid peptide takes part in the coordination of the metal ion, although, at pH above 9 the complexes with the 4N [N(Im), 3N(-)] coordination mode are formed. The phenolate -OH group of the Tyr(10) residue of the human fragments does not coordinate to the metal ion.

Photoinduced electron-transfer along alpha-helical and coiled-coil metallopeptides

A peptide-based electron-transfer system has been designed in which the specific positions of redox-active metal complexes appended to either an alpha-helix, or an alpha-helical coiled-coil, can be reversed to test the effect of the helix dipole in controlling photoinduced electron-transfer rates. Two 30-residue apopeptides were prepared having the following sequences: (I) Ac-K-(IEALEGK)(ICALEGK)(IEALEHK)(IEALEGK)-G-amide, and (II) Ac-K-(IEALEGK)(IHALEGK)-(IEALECK)(IEALEGK)-G-amide. Each apopeptide was reacted first with [Ru(bpy)2(phen-ClAc)]2+, where bpy = 2,2'-bipyridine and phen-ClAc = 5-chloroacetamido-1,10-phenanthroline, to attach the ruthenium polypyridyl center to the cysteine side-chain of the polypeptide. The isolated products were then reacted with [Ru(NH3)5(H2O)]2+ to yield the binuclear electron-transfer metallopeptides ET-I and ET-II. In these systems, electron-transfer occurred from the photoexcited ruthenium polypyridyl donor to the pentammine ruthenium (III) acceptor such that the electron-transfer occurred toward the negative end of the helix dipole in ET-I, and toward the positive end in ET-II. Circular dichroism spectroscopy showed that both peptides exist as dimeric alpha-helical coiled-coils in 100 mM phosphate buffer at pH 7, and as monomeric alpha-helices in the lower dielectric solvents 2,2,2-trifluoroethanol, and a 1:1 (v/v) mixture of CH2Cl2 and 2,2,2-trifluoroethanol. The peptides were predominately (i.e., 65-72%) alpha-helical in these solvents. The emission lifetime behavior of ET-I was seen to be identical to that of ET-II in each of the three solvents: no evidence for directional electron-transfer rates was observed. Possible reasons for this behavior are discussed.

Hydrolytically active Eu(III) and Ce(IV) EF-hand peptides

A chimeric peptide (P4) has been designed to incorporate an EF-hand metal-binding loop into the context of the helix-turn-helix DNA binding motif of the engrailed homeodomain. This construct binds lanthanides, and in the presence of these metals, promotes the cleavage of supercoiled DNA and model phosphate esters (bisnitrophenyl phosphate). P4 binds lanthanides with moderate affinities (Eu(III), log K(a)=4.85; and Ce(IV), log K(a)=5.23). The structure of P4 is enhanced by metal binding, but the increase in secondary structure observed by CD is small, and suggests the metallopeptide is also quite flexible. Despite this flexibility, the efficient cleavage of DNA at low concentrations is dependent on the metallopeptide, and not on peptide or metal alone. This enhanced reactivity suggests the designed DNA-binding EF-hand peptides deliver the metal to the DNA for catalysis, even without rigid secondary structure.

Metal binding and structure-activity relationship of the metalloantibiotic peptide bacitracin

Bacitracin is a widely used metallopeptide antibiotic produced by Bacillus subtilis and Bacillus licheniformis with a potent bactericidal activity directed primarily against Gram-positive organisms. This antibiotic requires a divalent metal ion such as Zn(2+) for its biological activity, and has been reported to bind several other transition metal ions, including Mn(2+), Co(2+), Ni(2+), and Cu(2+). Despite the widespread use of bacitracin since its discovery in the early 1940s, the structure-activity relationship of this drug has not been established and the coordination chemistry of its metal complexes was not fully determined until recently. This antibiotic has been suggested to influence cell functioning through more than one route. Since bacterial resistance against bacitracin is still rare despite several decades of widespread use, this antibiotic can serve as an ideal lead for the design of potent peptidyl antibiotics lacking bacterial resistance. In this review, the results of physical (including NMR, EPR, and EXAFS) and molecular biological studies regarding the synthesis and structure of bacitracin, the coordination chemistry of its metal derivatives, the mechanism of its antibiotic actions, its influence on membrane function, and its structure and function relationship are discussed.

Comparison of the binding of cadmium(II), mercury(II), and arsenic(III) to the de novo designed peptides TRI L12C and TRI L16C

Designed alpha-helical peptides of the TRI family with a general sequence Ac-G(LKALEEK)(4)G-CONH(2) were used as model systems for the study of metal-protein interactions. Variants containing cysteine residues in positions 12 (TRI L12C) and 16 (TRI L16C) were used for the metal binding studies. Cd(II) binding was investigated, and the results were compared with previous and current work on Hg(II) and As(III) binding. The metal peptide assemblies were studied with the use of UV, CD, EXAFS, (113)Cd NMR, and (111m)Cd perturbed angular correlation spectroscopy. The metalated peptide aggregates exhibited pH-dependent behavior. At high pH values, Cd(II) was bound to the three sulfurs of the three-stranded alpha-helical coiled coils. A mixture of two species was observed, including Cd(II) in a trigonal planar geometry. The complexes have UV bands at 231 nm (20 600 M(-1) cm(-1)) for TRI L12C and 232 nm (22 600 M(-1) cm(-1)) for TRI L16C, an average Cd-S bond length of 2.49 A for both cases, and a (113)Cd NMR chemical shift at 619 ppm (Cd(II)(TRI L12C)(3)(-)) or 625 ppm (Cd(II)(TRI-L16C)(3)(-)). Nuclear quadrupole interactions show that two different Cd species are present for both peptides. One species with omega(0) = 0.45 rad/ns and low eta is attributed to a trigonal planar Cd-(Cys)(3) site. The other, with a smaller omega(0), is attributed to a four-coordinate Cd(Cys)(3)(H(2)O) species. At low pH, no metal binding was observed. Hg(II) binding to TRI L12C was also found to be pH dependent, and a 3:1 sulfur-to-mercury(II) species was observed at pH 9.4. These metal peptide complexes provide insight into heavy metal binding and metalloregulatory proteins such as MerR or CadC.

Metal ion complexation and folding of linear peptides

A Linear peptide, GASYQDLG was synthesised and used as a model to evaluate the effects of nickel additions to increase the conformational stability. The NMR data obtained for the peptide and its histidyl derivative (H)(3)GASYQDLG(H)(3) suggest that in solution folded structures are present only for the H-tagged peptide-Ni(II) ion system. These results suggest that metal ions and additions of a double histidine tags of suitable length can be used as efficient tools to reduce peptide flexibility without other internal modifications. Synthesis of H-tagged analogs could offer a promising strategy for large-scale preparation of diagnostic tools and, in general, whenever more rigid molecular structures should be advisable.