The biogenesis and assembly of bacterial membrane proteins

Diverse sequences are functional at the C-terminus of the E. coli periplasmic chaperone SurA

SurA is a major periplasmic molecular chaperone in Escherichia coli and has been shown to assist the biogenesis of several outer membrane proteins. The C-terminal fragment of SurA folds into a short β-strand, which forms a small three-stranded anti-parallel β-sheet module with the N-terminal β-hairpin. We found that the length of the C-terminal fragment, rather than its exact amino acid composition, had a big impact on SurA function. To investigate the determinant factor of the C-terminal sequence, we created a library of SurA constructs randomized in the last 10 residues. We screened the library and randomly analyzed 19 constructs that displayed SurA activity. The C-termini of these constructs shared little sequence similarity, except that β-strand-forming residues were preferentially enriched. Three SurA constructs were expressed and purified for structural characterization. Circular dichroism and fluorescence spectroscopy analyses revealed that their structures were similar to the structure of the wild-type SurA. Our results suggest that for scaffolding purpose proteins may tolerate various sequences provided certain general requirements such as hydrophobicity and secondary structure propensity are satisfied. Furthermore, the sequence tolerance of SurA at the C-terminus indicates that this area is not likely to be involved in substrate binding.

Effect of crowding by Ficolls on OmpA and OmpT refolding and membrane insertion

Folding of outer membrane proteins (OMPs) has been studied extensively in vitro. However, most of these studies have been conducted in dilute buffer solution, which is different from the crowded environment in the cell periplasm, where the folding and membrane insertion of OMPs actually occur. Using OmpA and OmpT as model proteins and Ficoll 70 as the crowding agent, here we investigated the effect of the macromolecular crowding condition on OMP membrane insertion. We found that the presence of Ficoll 70 significantly slowed down the rate of membrane insertion of OmpA while had little effect on those of OmpT. To investigate if the soluble domain of OmpA slowed down membrane insertion in the presence of the crowding agent, we created a truncated OmpA construct that contains only the transmembrane domain (OmpA171). In the absence of crowding agent, OmpA171 refolded at a similar rate as OmpA, although with decreased efficiency. However, under the crowding condition, OmpA171 refolded significantly faster than OmpA. Our results suggest that the periplasmic domain slows down the rate, while improves the efficiency, of OmpA folding and membrane insertion under the crowding condition. Such an effect was not obvious when refolding was studied in buffer solution in the absence of crowding.

Analysis of surface protein expression reveals the growth pattern of the gram-negative outer membrane

The outer membrane (OM) of Gram-negative bacteria is a complex bilayer composed of proteins, phospholipids, lipoproteins, and lipopolysaccharides. Despite recent advances revealing the molecular pathways underlying protein and lipopolysaccharide incorporation into the OM, the spatial distribution and dynamic regulation of these processes remain poorly understood. Here, we used sequence-specific fluorescent labeling to map the incorporation patterns of an OM-porin protein, LamB, by labeling proteins only after epitope exposure on the cell surface. Newly synthesized LamB appeared in discrete puncta, rather than evenly distributed over the cell surface. Further growth of bacteria after labeling resulted in divergence of labeled LamB puncta, consistent with a spatial pattern of OM growth in which new, unlabeled material was also inserted in patches. At the poles, puncta remained relatively stationary through several rounds of division, a salient characteristic of the OM protein population as a whole. We propose a biophysical model of growth in which patches of new OM material are added in discrete bursts that evolve in time according to Stokes flow and are randomly distributed over the cell surface. Simulations based on this model demonstrate that our experimental observations are consistent with a bursty insertion pattern without spatial bias across the cylindrical cell surface, with approximately one burst of ∼10⁻² µm² of OM material per two minutes per µm². Growth by insertion of discrete patches suggests that stochasticity plays a major role in patterning and material organization in the OM.

All Gram-negative bacteria share common structural features, including an inner membrane, a stiff cell wall, and an outer membrane. Balancing growth in all three of these layers is critical for bacterial proliferation and survival, and malfunctions in growth often lead to cellular deformations and/or cell death. However, relatively little is known about how the incorporation of new material into the outer membrane is regulated in space and time. This work combines time-lapse microscopy with biophysical modeling and simulations to examine potential mechanisms by which new material is added to the outer membrane of the rod-shaped Gram-negative bacterium Escherichia coli. Our results indicate that the outer membrane grows in discrete bursts randomly distributed over the cylindrical cell surface. Each insertion event adds a random amount of new material, pushing old material into new locations and thus expanding the cell membrane. Using our biophysical model, we generated simulated fluorescence images and directly compared analyses of our experimental and computational results to constrain the rate and size of bursts of growth. Together, this indicates that growth of the outer membrane does not require spatial regulation, and the stochastic nature of insertion may contribute to the establishment of cellular patterning and asymmetry.

The host outer membrane proteins OmpA and OmpC are associated with the Shigella phage Sf6 virion

Assembly of dsDNA bacteriophage is a precisely programmed process. Potential roles of host cell components in phage assembly haven't been well understood. It was previously reported that two unidentified proteins were present in bacteriophage Sf6 virion (Casjens et al, 2004, J.Mol.Biol. 339, 379-394, Fig. 2A). Using tandem mass spectrometry, we have identified the two proteins as outer membrane proteins (OMPs) OmpA and OmpC from its host Shigella flexneri. The transmission electron cryo-microscopy structure of Sf6 shows significant density at specific sites at the phage capsid inner surface. This density fit well with the characteristic beta-barrel domains of OMPs, thus may be due to the two host proteins. Locations of this density suggest a role in Sf6 morphogenesis reminiscent of phage-encoded cementing proteins. These data indicate a new, OMP-related phage:host linkage, adding to previous knowledge that some lambdoid bacteriophage genomes contain OmpC-like genes that express phage-encoded porins in the lysogenic state.

Membrane proteome of the green sulfur bacterium Chlorobium tepidum (syn. Chlorobaculum tepidum) analyzed by gel-based and gel-free methods

Chlorobium tepidum is a Gram-negative bacterium of the green sulfur phylum (Chlorobia). Chlorobia are obligate anaerobic photolithoautotrophs that are widely distributed in aquatic environments where anoxic layers containing reduced sulfur compounds are exposed to light. The envelope of C. tepidum is a complex organelle composed of the outer membrane, the periplasm-peptidoglycan layer, and the cytoplasmic membrane. In addition to the outer and plasma membranes, C. tepidum contains chlorosomes attached to the cytoplasmic side of the plasma membrane. Each cellular compartment has a unique set of proteins, called sub-proteome. An important aim of proteome analysis is to study the level of the expressed genes and their response to environmental changes. Membrane protein studies are of primary importance to understand how nutrients are transported inside the cell, how toxic molecules are exported, and the mechanisms of photosynthesis and energy metabolism.

The bacterial cell envelope

The bacteria cell envelope is a complex multilayered structure that serves to protect these organisms from their unpredictable and often hostile environment. The cell envelopes of most bacteria fall into one of two major groups. Gram-negative bacteria are surrounded by a thin peptidoglycan cell wall, which itself is surrounded by an outer membrane containing lipopolysaccharide. Gram-positive bacteria lack an outer membrane but are surrounded by layers of peptidoglycan many times thicker than is found in the gram-negatives. Threading through these layers of peptidoglycan are long anionic polymers, called teichoic acids. The composition and organization of these envelope layers and recent insights into the mechanisms of cell envelope assembly are discussed.

Mechanisms of YidC-mediated insertion and assembly of multimeric membrane protein complexes

The YidC protein fulfills a dual and essential role in the assembly of inner membrane proteins in Escherichia coli. Besides interacting with transmembrane segments of newly synthesized membrane proteins that insert into the membrane via the SecYEG complex, YidC also functions as an independent membrane protein insertase and assists in membrane protein folding. Here, we discuss the mechanisms of YidC substrate recognition and membrane insertion with emphasis on its role in the assembly of multimeric membrane protein complexes such as the F1F0-ATP synthase.

S-layer anchoring and localization of an S-layer-associated protease in Caulobacter crescentus

The S-layer of the gram-negative bacterium Caulobacter crescentus is composed of a single protein, RsaA, that is secreted and assembled into a hexagonal crystalline array that covers the organism. Despite the widespread occurrence of comparable bacterial S-layers, little is known about S-layer attachment to cell surfaces, especially for gram-negative organisms. Having preliminary indications that the N terminus of RsaA anchors the monomer to the cell surface, we developed an assay to distinguish direct surface attachment from subunit-subunit interactions where small RsaA fragments are incubated with S-layer-negative cells to assess the ability of the fragments to reattach. In doing so, we found that the RsaA anchoring region lies in the first approximately 225 amino acids and that this RsaA anchoring region requires a smooth lipopolysaccharide species found in the outer membrane. By making mutations at six semirandom sites, we learned that relatively minor perturbations within the first approximately 225 amino acids of RsaA caused loss of anchoring. In other studies, we confirmed that only this N-terminal region has a direct role in S-layer anchoring. As a by-product of the anchoring studies, we discovered that Sap, the C. crescentus S-layer-associated protease, recognized a cleavage site in the truncated RsaA fragments that is not detected by Sap in full-length RsaA. This, in turn, led to the discovery that Sap was an extracellular membrane-bound protease, rather than intracellular, as previously proposed. Moreover, Sap was secreted to the cell surface primarily by the S-layer type I secretion apparatus.

Modulating the outer membrane with small RNAs

MicF, one of the first chromosomally encoded regulatory small RNAs (sRNAs) to be discovered, was found to modulate the expression of OmpF, an abundant outer membrane protein. Several recent papers have now shown that this is not an isolated case. At least five other sRNAs also regulate the synthesis of outer membrane porins, and additional sRNAs modulate the expression of other outer membrane proteins. Here we review what is known about these sRNAs and discuss the implications of this regulation.

Archaeal N-terminal protein maturation commonly involves N-terminal acetylation: a large-scale proteomics survey

We present the first large-scale survey of N-terminal protein maturation in archaea based on 873 proteomically identified N-terminal peptides from the two haloarchaea Halobacterium salinarum and Natronomonas pharaonis. The observed protein maturation pattern can be attributed to the combined action of methionine aminopeptidase and N-terminal acetyltransferase and applies to cytosolic proteins as well as to a large fraction of integral membrane proteins. Both N-terminal maturation processes primarily depend on the amino acid in penultimate position, in which serine and threonine residues are over represented. Removal of the initiator methionine occurs in two-thirds of the haloarchaeal proteins and requires a small penultimate residue, indicating that methionine aminopeptidase specificity is conserved across all domains of life. While N-terminal acetylation is rare in bacteria, our proteomic data show that acetylated N termini are common in archaea affecting about 15% of the proteins and revealing a distinct archaeal N-terminal acetylation pattern. Haloarchaeal N-terminal acetyltransferase reveals narrow substrate specificity, which is limited to cleaved N termini starting with serine or alanine residues. A comparative analysis of 140 ortholog pairs with identified N-terminal peptide showed that acetylatable N-terminal residues are predominantly conserved amongst the two haloarchaea. Only few exceptions from the general N-terminal acetylation pattern were observed, which probably represent protein-specific modifications as they were confirmed by ortholog comparison.

Advances in understanding bacterial outer-membrane biogenesis

The outer membrane of gram-negative bacteria such as Escherichia coli serves as a protective barrier that controls the influx and efflux of solutes. This allows the bacteria to inhabit several different, and often hostile, environments. The assembly of the E. coli outer membrane has been difficult to study using traditional genetic and biochemical methods, and how all its components reach the outer membrane after being synthesized in the cytoplasm and cytoplasmic membrane, how they are assembled in an environment that is devoid of an obvious energy source, and how assembly proceeds without disrupting the integrity of this essential cellular structure are all fundamental questions that remain unanswered. Here, we review the new approaches that have led to the recent discovery of components of the machinery involved in the biogenesis of this distinctive cellular organelle.

Interactions between folding factors and bacterial outer membrane proteins

The outer membrane is the first line of contact between Gram-negative bacteria and their external environment. Embedded in the outer membrane are integral outer membrane proteins (OMPs) that perform a diverse range of tasks. OMPs are synthesized in the cytoplasm and are translocated across the inner membrane and probably diffuse through the periplasm before they are inserted into the outer membrane in a folded and biologically active form. Passage through the periplasm presents a number of challenges, due to the hydrophobic nature of the OMPs and the choice of membranes into which they can insert. Recently, a number of periplasmic proteins and one OMP have been shown to play a role in OMP biogenesis. In this review, we describe what is known about these folding factors and how they function in a biological context. In particular, we focus on how they interact with the OMPs at the molecular level and present a comprehensive overview of data relating to a possible effect on OMP folding yield and kinetics. Furthermore, we discuss the role of lipo-chaperones, i.e. lipopolysaccharide and phospholipids, in OMP folding. Important advances have clearly been made in the field, but much work remains to be done, particularly in terms of describing the biophysical basis for the chaperone-OMP interactions which so intricately regulate OMP biogenesis.

Genome-wide identification of Pseudomonas aeruginosa exported proteins using a consensus computational strategy combined with a laboratory-based PhoA fusion screen

The Gram-negative pathogen Pseudomonas aeruginosa encodes multiple protein export systems, the substrates of which contain export signals such as N-terminal signal peptides. Here we report the first genome-wide computational and laboratory screen for N-terminal signal peptides in this important opportunistic pathogen. The computational identification of signal peptides was based on a consensus between multiple predictive tools and showed that 38% of the P. aeruginosa PAO1 proteome was predicted to encode exported proteins, most of which utilize cleavable type I signal peptides or uncleavable transmembrane helices. In addition, known and novel lipoproteins (type II), twin arginine transporter (TAT), and prepilin peptidase substrates (type IV) were also identified. A laboratory-based screen using the alkaline phosphatase (PhoA) fusion method was then used to test our predictions. In total, 310 nonredundant PhoA fusions were successfully identified, 296 of which possess a predicted export signal. Analysis of the PhoA fusion proteins lacking an export signal revealed that three proteins have alternate translation start sites that encode signal peptides, two proteins may use an unknown export signal, and the remaining nine proteins are likely cytoplasmic proteins and represent false positives associated with the PhoA screen. Our approach to identify exported proteins illustrates how computational and laboratory-based methods are complementary, where computational analyses provide a large number of accurate predictions while laboratory methods both confirm predictions and reveal unique cases meriting further analysis.

In the Archaea Haloferax volcanii, Membrane Protein Biogenesis and Protein Synthesis Rates Are Affected by Decreased Ribosomal Binding to the Translocon

In the haloarchaea Haloferax volcanii, ribosomes are found in the cytoplasm and membrane-bound at similar levels. Transformation of H. volcanii to express chimeras of the translocon components SecY and SecE fused to a cellulose-binding domain substantially decreased ribosomal membrane binding, relative to non-transformed cells, likely due to steric hindrance by the cellulose-binding domain. Treatment of cells with the polypeptide synthesis terminator puromycin, with or without low salt washes previously shown to prevent in vitro ribosomal membrane binding in halophilic archaea, did not lead to release of translocon-bound ribosomes, indicating that ribosome release is not directly related to the translation status of a given ribosome. Release was, however, achieved during cell starvation or stationary growth, pointing at a regulated manner of ribosomal release in H. volcanii. Decreased ribosomal binding selectively affected membrane protein levels, suggesting that membrane insertion occurs co-translationally in Archaea. In the presence of chimera-incorporating sterically hindered translocons, the reduced ability of ribosomes to bind in the transformed cells modulated protein synthesis rates over time, suggesting that these cells manage to compensate for the reduction in ribosome binding. Possible strategies for this compensation, such as a shift to a post-translational mode of membrane protein insertion or maintained ribosomal membrane-binding, are discussed.

Proteolysis as a Regulatory Mechanism

Proteases can play key roles in regulation by controlling the levels of critical components of, for example, signal transduction pathways. Proteolytic processing can remove regulatory proteins when they are not needed, while transforming others from the dormant into the biologically active state. The latter mechanism often involves a subsequent change of cellular localization such as the movement from the membrane to the nucleus. The investigation of these processes has revealed a new type of proteolytic activity, regulated intramembrane proteolysis, and a reversible switch in activity occurring in the HtrA family of serine proteases. The bacterial RseA and the human amyloid precursor processing pathways are used as models to review these novel principles that are evolutionarily conserved and have wide biological implications.

The core Escherichia coli signal recognition particle receptor contains only the N and G domains of FtsY

Previous studies have proposed that the N-terminal A domain (approximately 200 amino acid residues) of the Escherichia coli signal recognition particle (SRP) receptor, FtsY, is required for membrane targeting. In contrast to this suggestion, we show that A domain-truncated versions of FtsY, harboring only domains N and G, are functional. Therefore, we propose that N and G domains constitute the core SRP receptor.

Role of YidC in folding of polytopic membrane proteins

YidC of Echerichia coli, a member of the conserved Alb3/Oxa1/YidC family, is postulated to be important for biogenesis of membrane proteins. Here, we use as a model the lactose permease (LacY), a membrane transport protein with a known three-dimensional structure, to determine whether YidC plays a role in polytopic membrane protein insertion and/or folding. Experiments in vivo and with an in vitro transcription/translation/insertion system demonstrate that YidC is not necessary for insertion per se, but plays an important role in folding of LacY. By using the in vitro system and two monoclonal antibodies directed against conformational epitopes, LacY is shown to bind the antibodies poorly in YidC-depleted membranes. Moreover, LacY also folds improperly in proteoliposomes prepared without YidC. However, when the proteoliposomes are supplemented with purified YidC, LacY folds correctly. The results indicate that YidC plays a primary role in folding of LacY into its final tertiary conformation via an interaction that likely occurs transiently during insertion into the lipid phase of the membrane.

Membrane binding of SRP pathway components in the halophilic archaea Haloferax volcanii

Across evolution, the signal recognition particle pathway targets extra-cytoplasmic proteins to membranous translocation sites. Whereas the pathway has been extensively studied in Eukarya and Bacteria, little is known of this system in Archaea. In the following, membrane association of FtsY, the prokaryal signal recognition particle receptor, and SRP54, a central component of the signal recognition particle, was addressed in the halophilic archaea Haloferax volcanii. Purified H. volcanii FtsY, the FtsY C-terminal GTP-binding domain (NG domain) or SRP54, were combined separately or in different combinations with H. volcanii inverted membrane vesicles and examined by gradient floatation to differentiate between soluble and membrane-bound protein. Such studies revealed that both FtsY and the FtsY NG domain bound to H. volcanii vesicles in a manner unaffected by proteolytic pretreatment of the membranes, implying that in Archaea, FtsY association is mediated through the membrane lipids. Indeed, membrane association of FtsY was also detected in intact H. volcanii cells. The contribution of the NG domain to FtsY binding in halophilic archaea may be considerable, given the low number of basic charges found at the start of the N-terminal acidic domain of haloarchaeal FtsY proteins (the region of the protein thought to mediate FtsY-membrane association in Bacteria). Moreover, FtsY, but not the NG domain, was shown to mediate membrane association of H. volcanii SRP54, a protein that did not otherwise interact with the membrane.

Structure and function of the chloroplast signal recognition particle

The targeting of proteins, including the insertion and translocation of proteins in or across membranes, is a fundamental process within a cell, and a variety of specialized mechanisms for protein transport have been developed during evolution. The signal recognition particle (SRP) is found in the cytoplasm of most, if not all, eukaryotes and prokaryotes where it plays a central role in the co-translational insertion of membrane proteins into the endoplasmic reticulum and plasma membrane, respectively. SRP is a ribonucleoprotein consisting of an RNA and at least one polypeptide of approximately 54 kDa (SRP54). Interestingly, chloroplasts contain a specialized type of signal recognition particle. Chloroplast SRP (cpSRP) contains a SRP54 homologue but differs strikingly from cytosolic SRP in various aspects of structure and function. In contrast to cytosolic SRP, it contains a novel protein subunit (cpSRP43) and lacks RNA. CpSRP is also distinctive in its ability to interact with its substrate, light-harvesting chlorophyll a/ b-binding protein, post-translationally. Furthermore, it is remarkable that the 54 kDa subunit of cpSRP is also involved in the co-translational transport of chloroplast-encoded thylakoid proteins, and is therefore able to switch between the co- and post-translational means of interaction with its respective substrate proteins.

Reversible topological organization within a polytopic membrane protein is governed by a change in membrane phospholipid composition

Once inserted, transmembrane segments of polytopic membrane proteins are generally considered stably oriented due to the large free energy barrier to topological reorientation of adjacent extramembrane domains. However, the topology and function of the polytopic membrane protein lactose permease of Escherichia coli are dependent on the membrane phospholipid composition, revealing topological dynamics of transmembrane domains after stable membrane insertion (Bogdanov, M., Heacock, P. N., and Dowhan, W. (2002) EMBO J. 21, 2107-2116). In this study, we show that the high affinity phenylalanine permease PheP shares many similarities with lactose permease. PheP assembled in a mutant of E. coli lacking phosphatidylethanolamine (PE) exhibited significantly reduced active transport function and a complete inversion in topological orientation of the N terminus and adjoining transmembrane hairpin loop compared with PheP in a PE-containing strain. Introduction of PE following the assembly of PheP triggered a reorientation of the N terminus and adjacent hairpin to their native orientation associated with regain of wild-type transport function. The reversible orientation of these secondary transport proteins in response to a change in phospholipid composition might be a result of inherent conformational flexibility necessary for transport function or during protein assembly.

In vitro synthesis of lactose permease to probe the mechanism of membrane insertion and folding

Insertion and folding of polytopic membrane proteins is an important unsolved biological problem. To study this issue, lactose permease, a membrane transport protein from Escherichia coli, is transcribed, translated, and inserted into inside-out membrane vesicles in vitro. The protein is in a native conformation as judged by sensitivity to protease, binding of a monoclonal antibody directed against a conformational epitope, and importantly, by functional assays. By exploiting this system it is possible to express the N-terminal six helices of the permease (N(6)) and probe changes in conformation during insertion into the membrane. Specifically, when N(6) remains attached to the ribosome it is readily extracted from the membrane with urea, whereas after release from the ribosome or translation of additional helices, those polypeptides are not urea extractable. Furthermore, the accessibility of an engineered Factor Xa site to Xa protease is reduced significantly when N(6) is released from the ribosome or more helices are translated. Finally, spontaneous disulfide formation between Cys residues at positions 126 (Helix IV) and 144 (Helix V) is observed when N(6) is released from the ribosome and inserted into the membrane. Moreover, in contrast to full-length permease, N(6) is degraded by FtsH protease in vivo, and N(6) with a single Cys residue at position 148 does not react with N-ethylmaleimide. Taken together, the findings indicate that N(6) remains in a hydrophilic environment until it is released from the ribosome or additional helices are translated and continues to fold into a quasi-native conformation after insertion into the bilayer. Furthermore, there is synergism between N(6) and the C-terminal half of permease during assembly, as opposed to assembly of the two halves as independent domains.

Versatility of inner membrane protein biogenesis in Escherichia coli

To further our understanding of inner membrane protein (IMP) biogenesis in Escherichia coli, we have accomplished the widest in vivo IMP assembly screen so far. The biogenesis of a set of model IMPs covering most IMP structures possible has been studied in a variety of signal recognition particle (SRP), Sec and YidC mutant strains. We show that the assembly of the complete set of model IMPs is assisted (i.e. requires the aid of proteinaceous factors), and that the requirements for assembly of the model IMPs into the inner membrane differ significantly from each other. This indicates that IMP assembly is much more versatile than previously thought.

Pore formation and function of phosphoporin PhoE of Escherichia coli are determined by the core sugar moiety of lipopolysaccharide

The lipid matrix of the outer membrane of Gram-negative bacteria is an asymmetric bilayer composed of a phospholipid inner leaflet and a lipopolysaccharide outer leaflet. Incorporated into this lipid matrix are, among other macromolecules, the porins, which have a sieve-like function for the transport or exclusion of hydrophilic substances. It is known that a reduced amount of porins is found in the outer membrane of rough mutants as compared with wild-type bacteria. This observation was discussed to be caused by a reduced number of insertion sites in the former. We performed electrical measurements on reconstituted planar bilayers composed of lipopolysaccharide on one side and a phospholipid mixture on the other side using lipopolysaccharide from various rough mutant strains of Salmonella enterica serovar Minnesota. We found that pore formation by PhoE trimers that were added to the phospholipid side of the bilayers increased with the increasing length of the lipopolysaccharide core sugar moiety. These results allow us to conclude that the length of the sugar moiety of lipopolysaccharide is the parameter governing pore formation and that no particular insertion sites are required. Furthermore, we found that the voltage gating of the porin channels is strongly dependent on the composition of the lipid matrix.

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin, but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.

Export of autotransported proteins proceeds through an oligomeric ring shaped by C-terminal domains

An investigation was made into the oligomerization, the ability to form pores and the secretion-related properties of the 45 kDa C-terminal domain of the IgA protease (C-IgAP) from Neisseria gonorrhoeae. This protease is the best studied example of the autotransporters (ATs), a large family of exoproteins from Gram-negative bacteria that includes numerous virulence factors from human pathogens. These proteins contain an N-terminal passenger domain that em bodies the secreted polypeptide, while the C-domain inserts into the outer membrane (OM) and trans locates the linked N-module into the extracellular medium. Here we report that purified C-IgAP forms an oligomeric complex of approximately 500 kDa with a ring-like structure containing a central cavity of approximately 2 nm diameter that is the conduit for the export of the N-domains. These data overcome the previous model for ATs, which postulated the passage of the N-module through the hydrophilic channel of the beta-barrel of each monomeric C-domain. Our results advocate a secretion mechanism not unlike other bacterial export systems, such as the secretins or fimbrial ushers, which rely on multimeric complexes assembled in the OM.

A polytopic membrane protein displays a reversible topology dependent on membrane lipid composition

To address the role of phospholipids in the topological organization of polytopic membrane proteins, the function and assembly of lactose permease (LacY) was studied in mutants of Escherichia coli lacking phosphatidylethanolamine (PE). PE is required for the proper conformation and active transport function of LacY. The N-terminal half of LacY assembled in PE-lacking cells adopts an inverted topology in which normally non-translocated domains are translocated and vice versa. Post-assembly synthesis of PE triggers a conformational change, resulting in a lipid-dependent recovery of normal conformation and topology of at least one LacY subdomain accompanied by restoration of active transport. These results demonstrate that membrane protein topology once attained can be changed in a reversible manner in response to alterations in phospholipid composition, and may be subject to post-assembly proofreading to correct misfolded structures.

A molecular chaperone complex at the lysosomal membrane is required for protein translocation

A group of cytosolic proteins are targeted to lysosomes for degradation in response to serum withdrawal or prolonged starvation by a process termed chaperone-mediated autophagy. In this proteolytic pathway little is known about how proteins are translocated across lysosomal membranes. We now show that an isoform of the constitutively expressed protein of the heat shock family of 70 kDa (Hsc70) is associated with the cytosolic side of the lysosomal membrane where it binds to substrates of this proteolytic pathway. Results from coimmunoprecipitation and colocalization studies indicate that this molecular chaperone forms complexes with other molecular chaperones and cochaperones, including Hsp90, Hsp40, the Hsp70-Hsp90 organizing protein (Hop), the Hsp70-interacting protein (Hip), and the Bcl2-associated athanogene 1 protein (BAG-1). Antibodies against Hip, Hop, Hsp40 and Hsc70 block transport of protein substrates into purified lysosomes.

Sec-dependent membrane protein insertion: sequential interaction of nascent FtsQ with SecY and YidC

Recent studies identified YidC as a novel membrane factor that may play a key role in membrane insertion of inner membrane proteins (IMPs), both in conjunction with the Sec-translocase and as a separate entity. Here, we show that the type II IMP FtsQ requires both the translocase and, to a lesser extent, YidC in vivo. Using photo-crosslinking we demonstrate that the transmembrane (TM) domain of the nascent IMP FtsQ inserts into the membrane close to SecY and lipids, and moves to a combined YidC/lipid environment upon elongation. These data are consistent with a crucial role for YidC in the lateral transfer of TM domains from the Sec translocase into the lipid bilayer.

Formation of disulphide bonds during secretion of proteins through the periplasmic-independent type I pathway

In this work, we have investigated whether the bacterial type I secretion pathway, which does not have a periplasmic intermediate of the secreted protein, allows the formation of disulphide bridges. To this end, the formation of disulphide bonds has been studied in an antibody single-chain Fv (scFv) fragment secreted by the Escherichia coli haemolysin (Hly) transporter (a paradigm of type I secretion). The scFv antibody fragment was used as a disulphide bond and protein-folding reporter, as it contains two disulphide bridges that are required for its correct folding (i.e. to preserve its antigen-binding activity). We show that an scFv-HlyA hybrid secreted by Hly type I transporter (TolC, HlyB, HlyD) is accumulated in the extracellular medium with the disulphide bonds correctly formed. Neither periplasmic and inner membrane-bound Dsb enzymes (e.g. DsbC, DsbG, DsbB and DsbD) nor cytoplasmic thioredoxins (TrxA and TrxC) were required for scFv-HlyA oxidation. However, a mutation of the thioredoxin reductase gene (trxB), which leads to the cytoplasmic accumulation of the oxidized forms of thioredoxins, had a specific inhibitory effect on the Hly-dependent secretion of disulphide-containing proteins. These data suggest that premature cytoplasmic oxidation of the substrate may interfere with the secretion process. Taken together, these results indicate not only that the type I system tolerates secretion of disulphide-containing proteins, but also that disulphide bonds are specifically formed during the passage of the polypeptide through the export conduit.

Analysis of transcriptionally active gene clusters of major outer membrane protein multigene family in Ehrlichia canis and E. chaffeensis

Ehrlichia canis and E. chaffeensis are tick-borne obligatory intramonocytic ehrlichiae that cause febrile systemic illness in humans and dogs, respectively. The current study analyzed the pleomorphic multigene family encoding approximately 30-kDa major outer membrane proteins (OMPs) of E. canis and E. chaffeensis. Upstream from secA and downstream of hypothetical transcriptional regulator, 22 paralogs of the omp gene family were found to be tandemly arranged except for one or two genes with opposite orientations in a 28- and a 27-kb locus in the E. canis and E. chaffeensis genomes, respectively. Each locus consisted of three highly repetitive regions with four nonrepetitive intervening regions. E. canis, in addition, had a 6.9-kb locus which contained a repeat of three tandem paralogs in the 28-kb locus. These total 47 paralogous and orthologous genes encoded OMPs of approximately 30 to 35 kDa consisting of several hypervariable regions alternating with conserved regions. In the 5'-end half of the 27-kb locus or the 28-kb locus of each Ehrlichia species, 14 paralogs were linked by short intergenic spaces ranging from -8 bp (overlapped) to 27 bp, and 8 remaining paralogs in the 3'-end half were connected by longer intergenic spaces ranging from 213 to 632 bp. All 22 paralogs, five unknown genes, and secA in the omp cluster in E. canis were transcriptionally active in the monocyte culture, and the paralogs with short intergenic spaces were cotranscribed with their adjacent genes, including the respective intergenic spaces at both the 5' and the 3' sides. Although omp genes are diverse, our results suggest that the gene organization of the clusters and the gene locus are conserved between two species of Ehrlichia to maintain a unique transcriptional mechanism for adaptation to environmental changes common to them.

New prospects in studying the bacterial signal recognition particle pathway

In vivo and in vitro studies have suggested that the bacterial version of the mammalian signal recognition particle (SRP) system plays an essential and selective role in protein biogenesis. The bacterial SRP system consists of at least two proteins and an RNA molecule (termed Ffh, FtsY and 4.5S RNA, respectively, in Escherichia coli). Recent evidence suggests that other putative bacterial-specific SRP components may also exist. In vitro experiments confirmed the expected basic features of the bacterial SRP system by demonstrating interactions among the SRP components themselves, between them and ribosomes, ribosome-linked hydrophobic nascent polypeptides or inner membranes. The availability of a conserved (and essential) bacterial SRP version has facilitated the implementation of powerful genetic and biochemical approaches for studying the cascade of events during the SRP-mediated targeting process in vivo and in vitro as well as the three-dimensional structures and the properties of each SRP component and complex.