Oxidations by the system “hydrogen peroxide–manganese(IV) complex–carboxylic acid”

O2 Activation and Enzymatic C-H Bond Activation Mediated by a Dimanganese Cofactor

Dioxygen (O2) is a potent oxidant used by aerobic organisms for energy transduction and critical biosynthetic processes. Numerous metalloenzymes harness O2 to mediate C-H bond hydroxylation reactions, but most commonly feature iron or copper ions in their active site cofactors. In contrast, many manganese-activated enzymes─such as glutamine synthetase and isocitrate lyase─perform redox neutral chemical transformations and very few are known to activate O2 or C-H bonds. Here, we report that the dimanganese-metalated form of the cambialistic monooxygenase SfbO (Mn2-SfbO) can efficiently mediate enzymatic C-H bond hydroxylation. The activity of the dimanganese form of SfbO toward substrate hydroxylation is comparable to that of its heterobimetallic Mn/Fe form but exhibits distinct kinetic profiles. Kinetic, spectroscopic, and structural studies invoke a mixed-valent dimanganese cofactor (MnIIMnIII) in O2 activation and evidence a stoichiometric role for superoxide in maturing an O2-inert MnII2 cofactor. Computational studies support a hypothesis wherein superoxide addition to the MnII2 cofactor installs a critical bridging hydroxide ligand that stabilizes higher-valent manganese oxidation states. These findings establish the viability of proteinaceous dimanganese cofactors in mediating complex, multistep redox transformations.

Post-translational amino acid conversion in photosystem II as a possible origin of photosynthetic oxygen evolution

Photosynthetic oxygen evolution is performed at the Mn cluster in photosystem II (PSII). The advent of this reaction on ancient Earth changed its environment by generating an oxygenic atmosphere. However, how oxygen evolution originated during the PSII evolution remains unknown. Here, we characterize the site-directed mutants at the carboxylate ligands to the Mn cluster in cyanobacterial PSII. A His residue replaced for D1-D170 is found to be post-translationally converted to the original Asp to recover oxygen evolution. Gln/Asn residues in the mutants at D1-E189/D1-D342 are also converted to Glu/Asp, suggesting that amino-acid conversion is a common phenomenon at the ligand sites of the Mn cluster. We hypothesize that post-translational generation of carboxylate ligands in ancestral PSII could have led to the formation of a primitive form of the Mn cluster capable of partial water oxidation, which could have played a crucial role in the evolutionary process of photosynthetic oxygen evolution.

How photosynthetic oxygen evolution is originated on ancient Earth is unknown. Here, the authors find that some amino acid residues at the ligand sites of the Mn cluster can be posttranslationally converted to the original carboxylate residues, which could have contributed to the evolutionary process of photosynthetic oxygen evolution.

Directing transition metal-based oxygen-functionalization catalysis

This review presents the recent progress of oxygen functionalization reactions based on non-electrochemical (conventional organic synthesis) and electrochemical methods. Although both methods have their advantages and limitations, the former approach has been used to synthesize a broader range of organic substances as the latter is limited by several factors, such as poor selectivity and high energy cost. However, because electrochemical methods can replace harmful terminal oxidizers with external voltage, organic electrosynthesis has emerged as greener and more eco-friendly compared to conventional organic synthesis. The progress of electrochemical methods toward oxygen functionalization is presented by an in-depth discussion of different types of electrically driven-chemical organic synthesis, with particular attention to recently developed electrochemical systems and catalyst designs. We hope to direct the attention of readers to the latest breakthroughs of traditional oxygen functionalization reactions and to the potential of electrochemistry for the transformation of organic substrates to useful end products.

Oxidation of Organic Compounds with Peroxides Catalyzed by Polynuclear Metal Compounds

The review describes articles that provide data on the synthesis and study of the properties of catalysts for the oxidation of alkanes, olefins, and alcohols. These catalysts are polynuclear complexes of iron, copper, osmium, nickel, manganese, cobalt, vanadium. Such complexes for example are: [Fe2(HPTB)(m-OH)(NO3)2](NO3)2·CH3OH·2H2O, where HPTB-¼N,N,N0,N0-tetrakis(2-benzimidazolylmethyl)-2-hydroxo-1,3-diaminopropane; complex [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2, where dppm-1,1-bis(diphenylphosphino)methane; (2,3-η-1,4-diphenylbut-2-en-1,4-dione)undecacarbonyl triangulotriosmium; phenylsilsesquioxane [(PhSiO1.5)10(CoO)5(NaOH)]; bi- and tri-nuclear oxidovanadium(V) complexes [{VO(OEt)(EtOH)}2(L2)] and [{VO(OMe)(H2O)}3(L3)]·2H2O (L2 = bis(2-hydroxybenzylidene)terephthalohydrazide and L3 = tris(2-hydroxybenzylidene)benzene-1,3,5-tricarbohydrazide); [Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane). For comparison, articles are introduced describing catalysts for the oxidation of alkanes and alcohols with peroxides, which are simple metal salts or mononuclear metal complexes. In many cases, polynuclear complexes exhibit higher activity compared to mononuclear complexes and exhibit increased regioselectivity, for example, in the oxidation of linear alkanes. The review contains a description of some of the mechanisms of catalytic reactions. Additionally presented are articles comparing the rates of oxidation of solvents and substrates under oxidizing conditions for various catalyst structures, which allows researchers to conclude about the nature of the oxidizing species. This review is focused on recent works, as well as review articles and own original studies of the authors.

The effects of metals and ligands on the oxidation of n-octane using iridium and rhodium “PNP” aminodiphosphine complexes

Ir and Rh “PNP” complexes with different ligands are utilized for the oxidation of n-octane. Based on the obtained conversion, selectivity, and the characterized recovered catalysts, it is found that the combination of Ir and the studied ligands does not promote the redox mechanism that is known to result in selective formation of oxo and peroxo compounds [desired species for C(1) activation]. Instead, they support a deeper oxidation mechanism, and thus higher selectivity for ketones and acids is obtained. In contrast, these ligands seem to tune the electron density around the Rh (in the Rh-PNP complexes), and thus result in a higher n-octane conversion and improved selectivity for the C(1) activated products, with minimized deeper oxidation, in comparison to Ir-PNP catalysts.

Robust Mn(III) N-pyridylporphyrin-based biomimetic catalysts for hydrocarbon oxidations: heterogenization on non-functionalized silica gel versus chloropropyl-functionalized silica gel

Two classes of heterogenized biomimetic catalysts were prepared and characterized for hydrocarbon oxidations: (1) by covalent anchorage of the three Mn(iii) meso-tetrakis(2-, 3-, or 4-pyridyl)porphyrin isomers by in situ alkylation with chloropropyl-functionalized silica gel (Sil-Cl) to yield Sil-Cl/MnPY (Y = 1, 2, 3) materials, and (2) by electrostatic immobilization of the three Mn(iii) meso-tetrakis(N-methylpyridinium-2, 3, or 4-yl)porphyrin isomers (MnPY, Y = 4, 5, 6) on non-modified silica gel (SiO2) to yield SiO2/MnPY (Y = 4, 5, 6) materials. Silica gel used was of column chromatography grade and Mn porphyrin loadings were deliberately kept at a low level (0.3% w/w). These resulting materials were explored as catalysts for iodosylbenzene (PhIO) oxidation of cyclohexane, n-heptane, and adamantane to yield the corresponding alcohols and ketones; the oxidation of cyclohexanol to cyclohexanone was also investigated. The heterogenized catalysts exhibited higher efficiency and selectivity than the corresponding Mn porphyrins under homogeneous conditions. Recycling studies were consistent with low leaching/destruction of the supported Mn porphyrins. The Sil-Cl/MnPY catalysts were more efficient and more selective than SiO2/MnPY ones; alcohol selectivity may be associated with hydrophobic silica surface modification reminiscent of biological cytochrome P450 oxidations. The use of widespread, column chromatography, amorphous silica yielded Sil-Cl/MnPY or SiO2/MnPY catalysts considerably more efficient than the corresponding, previously reported materials with mesoporous Santa Barbara Amorphous No 15 (SBA-15) silica. Among the materials studied, in situ derivatization of Mn(iii) 2-N-pyridylporphyrin by covalent immobilization on Sil-Cl to yield Sil-Cl/MnP1 showed the best catalytic performance with high stability against oxidative destruction and reusability/recyclability.

Alkane Oxygenation with Hydrogen Peroxide Catalysed by Soluble Derivatives of Nickel and Platinum

Various alkanes can be oxidised by hydrogen peroxide in acetonitrile solution at 70°C if Ni(ClO4)2 (in the presence of 1,4,7-trimethyl-1,4,7-triazacyclononane) or H2PtCl6 are used as catalysts; whereas the nickel-catalysed reaction seems to proceed via attack of hydroxyl radicals on an alkane, the oxidation in the presence of platinum occurs possibly with participation of oxo or peroxo derivatives of this metal.

Solventless, selective and catalytic oxidation of primary, secondary and benzylic alcohols by a Merrifield resin supported molybdenum(vi) complex with H2O2 as an oxidant

Here, we have described the synthesis, characterization and catalytic activity of a dioxo-molybdenum(vi) complex supported on functionalized Merrifield resin (MR-SB-Mo). The functionalization of Merrifield resin (MR) was achieved in two-steps viz. carbonylation (MR-C) and Schiff base formation (MR-SB). The compounds, MR-C, MR-SB and MR-SB-Mo, were characterized at each step of the synthesis by elemental, SEM, EDX, thermal, BET and different spectroscopic analysis. The catalyst, MR-SB-Mo, efficiently and selectively oxidized a wide variety of alcohols to aldehydes or ketones using 30% H2O2 as an oxidant with reasonably good TOF (660 h-1 in case of benzyl alcohol). The catalyst acted heterogeneously under solventless reaction conditions and did not lead to over oxidized products under optimized conditions. The catalyst afforded regeneration and can be reused for at least five reaction cycles without loss of efficiency and product selectivity. A reaction mechanism for the catalytic activity of MR-SB-Mo was proposed and a probable reactive intermediate species isolated.

Increase of Direct C-C Coupling Reaction Yield by Identifying Structural and Electronic Properties of High-Spin Iron Tetra-azamacrocyclic Complexes

Macrocyclic ligands have been explored extensively as scaffolds for transition metal catalysts for oxygen and hydrogen atom transfer reactions. C-C reactions facilitated using earth abundant metals bound to macrocyclic ligands have not been well-understood but could be a green alternative to replacing the current expensive and toxic precious metal systems most commonly used for these processes. Therefore, the yields from direct Suzuki-Miyaura C-C coupling of phenylboronic acid and pyrrole to produce 2-phenylpyrrole facilitated by eight high-spin iron complexes ([Fe3+L1(Cl)2]+, [Fe3+L4(Cl)2]+, [Fe2+L5(Cl)]+, [Fe2+L6(Cl)2], [Fe3+L7(Cl)2]+, [Fe3+L8(Cl)2]+, [Fe2+L9(Cl)]+, and [Fe2+L10(Cl)]+) were compared to identify the effect of structural and electronic properties on catalytic efficiency. Specifically, catalyst complexes were compared to evaluate the effect of five properties on catalyst reaction yields: (1) the coordination requirements of the catalyst, (2) redox half-potential of each complex, (3) topological constraint/rigidity, (4) N atom modification(s) increasing oxidative stability of the complex, and (5) geometric parameters. The need for two labile cis-coordination sites was confirmed based on a 42% decrease in catalytic reaction yield observed when complexes containing pentadentate ligands were used in place of complexes with tetradentate ligands. A strong correlation between iron(III/II) redox potential and catalytic reaction yields was also observed, with [Fe2+L6(Cl)2] providing the highest yield (81%, -405 mV). A Lorentzian fitting of redox potential versus yields predicts that these catalysts can undergo more fine-tuning to further increase yields. Interestingly, the remaining properties explored did not show a direct, strong relationship to catalytic reaction yields. Altogether, these results show that modifications to the ligand scaffold using fundamental concepts of inorganic coordination chemistry can be used to control the catalytic activity of macrocyclic iron complexes by controlling redox chemistry of the iron center. Furthermore, the data provide direction for the design of improved catalysts for this reaction and strategies to understand the impact of a ligand scaffold on catalytic activity of other reactions.

Relationship between Hydrogen-Atom Transfer Driving Force and Reaction Rates for an Oxomanganese(IV) Adduct

Hydrogen atom transfer (HAT) reactions by high-valent metal-oxo intermediates are important in both biological and synthetic systems. While the HAT reactivity of Fe^IV-oxo adducts has been extensively investigated, studies of analogous Mn^IV-oxo systems are less common. There are several recent reports of Mn^IV-oxo complexes, supported by neutral pentadentate ligands, capable of cleaving strong C-H bonds at rates approaching those of analogous Fe^IV-oxo species. In this study, we provide a thorough analysis of the HAT reactivity of one of these Mn^IV-oxo complexes, [Mn^IV(O)(2pyN2Q)]²⁺, which is supported by an N5 ligand with equatorial pyridine and quinoline donors. This complex is able to oxidize the strong C-H bonds of cyclohexane with rates exceeding those of Fe^IV-oxo complexes with similar ligands. In the presence of excess oxidant (iodosobenzene), cyclohexane oxidation by [Mn^IV(O)(2pyN2Q)]²⁺ is catalytic, albeit with modest turnover numbers. Because the rate of cyclohexane oxidation by [Mn^IV(O)(2pyN2Q)]²⁺ was faster than that predicted by a previously published Bells-Evans-Polanyi correlation, we expanded the scope of this relationship by determining HAT reaction rates for substrates with bond dissociation energies spanning 20 kcal/mol. This extensive analysis showed the expected correlation between reaction rate and the strength of the substrate C-H bond, albeit with a shallow slope. The implications of this result with regard to Mn^IV-oxo and Fe^IV-oxo reactivity are discussed.

Direct Selective Oxidative Functionalization of C-H Bonds with H₂O₂: Mn-Aminopyridine Complexes Challenge the Dominance of Non-Heme Fe Catalysts

Non-heme iron(II) complexes are widespread synthetic enzyme models, capable of conducting selective C–H oxidation with H₂O₂ in the presence of carboxylic acid additives. In the last years, structurally similar manganese(II) complexes have been shown to catalyze C–H oxidation with similarly high selectivity, and with much higher efficiency. In this mini-review, recent catalytic and mechanistic data on the selective C–H oxygenations with H₂O₂ in the presence of manganese complexes are overviewed. A distinctive feature of catalyst systems of the type Mn complex/H₂O₂/carboxylic is the existence of two alternative reaction pathways (as found for the oxidation of cumenes), one leading to the formation of alcohol, and the other to ester. The mechanisms of formation of the alcohol and the ester are briefly discussed.

Cobalt aminodiphosphine complexes as catalysts in the oxidation of n-octane

New cobalt “PNP” aminodiphosphine complexes have been prepared and characterised. They show good catalytic activity in the oxidation of n-octane to C8 oxygenates using tert-butyl hydroperoxide as an oxidant.

The role of carboxylato ligand dissociation in the oxidation of chrysin with H₂O₂ catalysed by [Mn₂(III,IV)(μ-CH₃COO)(μ-O)₂(Me₄dtne)](PF₆)₂

The aqueous and non-aqueous chemistry of the complex [Mn2(III,IV)(μ-CH3COO)(μ-O)2(Me4dtne)](PF6)2 (where Me4dtne = 1,2-bis(4,7-dimethyl-1,4,7-triazacyclonon-1-yl)ethane), which has been demonstrated as an exceptionally active catalyst in the bleaching of raw cotton and especially wood pulp at high pH (>11), is explored by UV/vis absorption, Raman and EPR spectroscopies and cyclic voltammetry. The data indicate that dissociation of the μ-acetato bridge is essential to the catalyst activity and rationalises the effect of sequestrants such as DTPA on its performance.

Asymmetric epoxidation of olefins with hydrogen peroxide by an in situ-formed manganese complex

Asymmetric epoxidation of a variety of cis, trans, terminal, and trisubstituted olefins in excellent yields (up to 94%) and enantioselectivities (>99% ee) by an in situ-formed manganese complex using H2O2 has been developed. A relationship between the hydrophobicity of the catalyst imposed by ligand and the catalytic activity has been observed. The influence of the amount and identity of the acid additive was examined, and improved enantioselectivities were achieved through the use of a catalytic amount of a carboxylic acid additive.

Mn(ii) acetate: an efficient and versatile oxidation catalyst for alcohols

A homogeneous catalytic system consisting of Mn(ii) acetate, tert-butylhydroperoxide, acetonitrile and trifluoroacetic acid oxidises various alcohols efficiently and selectively.

Coordination chemistry of Co complexes containing tridentate SNS ligands and their application as catalysts for the oxidation of n-octane

Fully characterized cobalt complexes of tridentate SNS ligands were selective (up to 90%) for the oxidation of n-octane to octanones.

Partial oxidation of ethane to oxygenates using Fe- and Cu-containing ZSM-5

Iron and copper containing ZSM-5 catalysts are effective for the partial oxidation of ethane with hydrogen peroxide giving combined oxygenate selectivities and productivities of up to 95.2% and 65 mol kgcat(-1) h(-1), respectively. High conversion of ethane (ca. 56%) to acetic acid (ca. 70% selectivity) can be observed. Detailed studies of this catalytic system reveal a complex reaction network in which the oxidation of ethane gives a range of C2 oxygenates, with sequential C-C bond cleavage generating C1 products. We demonstrate that ethene is also formed and can be subsequently oxidized. Ethanol can be directly produced from ethane, and does not originate from the decomposition of its corresponding alkylperoxy species, ethyl hydroperoxide. In contrast to our previously proposed mechanism for methane oxidation over similar zeolite catalysts, the mechanism of ethane oxidation involves carbon-based radicals, which lead to the high conversions we observe.

Initial rate kinetic studies show an unexpected influence of para-substituents on the catalytic behaviour of manganese complexes of TMTACN in the epoxidation of styrenes with H2O2

Investigations into the efficacy of a range of enantiomerically pure BINOL additives in the epoxidation of styrene substrates with a number of manganese catalysts prepared from the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane, TMTACN, using hydrogen peroxide as the oxidant have revealed that there are fundamental differences in reactivity between apparently similar systems. Whilst no asymmetric induction was obtained in the styrene oxide products formed, the data obtained from initial rate kinetic studies appear to be consistent with a number of different catalytically active species operating, the nature of which are profoundly affected by the starting materials used.