Progress in asymmetric heterogeneous catalysis: Design of novel chirally modified platinum metal catalysts1Communication presented at the First Francqui Colloquium, Brussels, 19–20 February 1996.1

Metadynamics molecular dynamics and isothermal Brownian-type molecular dynamics simulations for the chiral cluster Au18

In an effort to gain insight into enantiomeric transitions, their transition mechanism, time span of transitions and distribution of time spans etc, we performed molecular dynamics (MD) simulations on chiral clusters Au₁₀, Au₁₅and Au₁₈, and found that viable reaction coordinates can be deduced from simulation data for enlightening the enantiomeric dynamics for Au₁₀and Au₁₅, but not so for Au₁₈. The failure in translating the Au₁₈-L ⇌ Au₁₈-R transitions by MD simulations has been chalked up to the thermal energyk_BTat 300 K being much lower than energy barriers separating the enantiomers of Au₁₈. Two simulation strategies were taken to resolve this simulation impediment. The first one uses the well-tempered metadynamics MD (MMD) simulation, and the second one adeptly applies first a somewhat crude MMD simulation to locate a highly symmetrical isomer Au_18Sand subsequently employed it as initial configuration in the MD simulation. In both strategies, we work in collective variable space of lower dimensionality. The well-tempered MMD simulation tactic was carried out aiming to offer a direct verification of Au₁₈enantiomers, while the tactic to conduct MMD/MD simulations in two consecutive simulation steps was intended to provide an indirect evidence of the existence of enantiomers of Au₁₈given that energy barriers separating them are much higher than ca.k_BTat 300 K. This second tactic, in addition to confirming indirectly Au₁₈-L and Au₁₈-R starting from the symmetrical cluster Au_18S, the simulation results shed light also on the mechanism akin to associative/nonassociative reaction transitions.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Adsorption geometry and self-assembling of chiral modifier (R)-(+)-1-(1-naphthylethylamine) on Pt(111)

A mechanistic study on interaction of a chiral modifier - (R)-(+)-1-(1-naphthylethylamine) (R-NEA) - with a single crystalline Pt(111) surface is reported. The details of the adsorption geometry of individual R-NEA molecules and their intermolecular interactions are addressed by combination of infrared reflection absorption spectroscopy (IRAS) and scanning tunneling microscopy (STM). The spectroscopic observations suggest that the molecules are tilted with respect to the underlying metal substrate with the long axis of the naphthyl ring being parallel and the short axis tilted with respect to the surface. In the medium coverage range, formation of directed 3-5 membered chains was observed by STM for the first time, which points to intermolecular bonding between individual molecules and might account for an unusual tilted adsorption geometry deduced from the IR spectra. Based on the STM images revealing the atomic structure of the Pt grid close to the R-NEA chains, we propose the adsorption configuration of NEA fitting both the IRAS and STM data. The obtained results suggest that this strong intermolecular interaction energetically stabilizes the tilted adsorption geometry of the naphthyl ring, which otherwise would be expected to lie flat on the metal to maximize the dispersive interactions. At the coverage close to saturation, R-NEA builds a self-assembled overlayer with hexagonal symmetry, exhibiting intermolecular distances larger than in the directed chains.

From biotechnology principles to functional and low-cost metallic bionanocatalysts

Chemical, physical and mechanical methods of nanomaterial preparation are still regarded as mainstream methods, and the scientific community continues to search for new ways of nanomaterial preparation. The major objective of this review is to highlight the advantages of using green chemistry and bionanotechnology in the preparation of functional low-cost catalysts. Bionanotechnology employs biological principles and processes connected with bio-phase participation in both design and development of nano-structures and nano-materials, and the biosynthesis of metallic nanoparticles is becoming even more popular due to; (i) economic and ecologic effectiveness, (ii) simple one-step nanoparticle formation, stabilisation and biomass support and (iii) the possibility of bio-waste valorisation. Although it is quite difficult to determine the precise mechanisms in particular biosynthesis and research is performed with some risk in all trial and error experiments, there is also the incentive of understanding the exact mechanisms involved. This enables further optimisation of bionanoparticle preparation and increases their application potential. Moreover, it is very important in bionanotechnological procedures to ensure repeatability of the methods related to the recognised reaction mechanisms. This review, therefore, summarises the current state of nanoparticle biosynthesis. It then demonstrates the application of biosynthesised metallic nanoparticles in heterogeneous catalysis by identifying the many examples where bionanocatalysts have been successfully applied in model reactions. These describe the degradation of organic dyes, the reduction of aromatic nitro compounds, dehalogenation of chlorinated aromatic compounds, reduction of Cr(VI) and the synthesis of important commercial chemicals. To ensure sustainability, it is important to focus on nanomaterials that are capable of maintaining the important green chemistry principles directly from design inception to ultimate application.

Retracted Article: A miraculous chiral Ir–Rh bimetallic nanocatalyst for asymmetric hydrogenation of activated ketones

A miraculous chiral Ir–Rh bimetallic nanocatalyst was explored for the asymmetric hydrogenation of activated ketones.

Transfer of chiral information from a chiral solvent to a two-dimensional network

Chiral induction in self-assembled monolayers has garnered considerable attention in the recent past, not only due to its importance in chiral resolution and enantioselective heterogeneous catalysis but also because of its relevance to the origin of homochirality in life. Here, we demonstrate the emergence of homochirality in a supramolecular low-density network formed by achiral molecules at the interface of a chiral solvent and an atomically-flat achiral substrate. We focus on the impact of structure and functionality of the adsorbate and the chiral solvent on the chiral induction efficiency in self-assembled physisorbed monolayers, as revealed by scanning tunneling microscopy. Different induction mechanisms are proposed and evaluated, with the assistance of advanced molecular modeling simulations.

Chirality in adsorption on solid surfaces

In the present review we survey the main advances made in recent years on the understanding of chemical chirality at solid surfaces. Chirality is an important topic, made particularly relevant by the homochiral nature of the biochemistry of life on Earth, and many chiral chemical reactions involve solid surfaces. Here we start our discussion with a description of surface chirality and of the different ways that chirality can be bestowed on solid surfaces. We then expand on the studies carried out to date to understand the adsorption of chiral compounds at a molecular level. We summarize the work published on the adsorption of pure enantiomers, of enantiomeric mixtures, and of prochiral molecules on chiral and achiral model surfaces, especially on well-defined metal single crystals but also on other flat substrates such as highly ordered pyrolytic graphite. Several phenomena are identified, including surface reconstruction and chiral imprinting upon adsorption of chiral agents, and the enhancement or suppression of enantioselectivity seen in some cases upon adsorption of enantiomixtures of chiral compounds. The possibility of enhancing the enantiopurity of adsorbed layers upon the addition of chiral seeds and the so-called "sergeants and soldiers" phenomenon are presented. Examples are provided where the chiral behavior has been associated with either thermodynamic or kinetic driving forces. Two main approaches to the creation of enantioselective surface sites are discussed, namely, via the formation of supramolecular chiral ensembles made out of small chiral adsorbates, and by adsorption of more complex chiral molecules capable of providing suitable chiral environments for reactants by themselves, via the formation of individual adsorbate:modifier adducts on the surface. Finally, a discussion is offered on the additional effects generated by the presence of the liquid phase often required in practical applications such as enantioselective crystallization, chiral chromatography, and enantioselective catalysis.

Investigation of the interaction between a novel unnatural chiral ligand and reactant on palladium for asymmetric hydrogenation

We report about the mechanistic studies of the reaction between a newly synthesized (S)-2-((R)-3H-dinaphtho[2,1-c:1',2'-e]azepin-4(5H)-yl)-2-phenylethanol based on the binaphthyl skeleton and (E)-2-methyl-5-phenylpent-2-enoic acid for the asymmetric hydrogenation of α,β-unsaturated acids with heterogeneous palladium catalysts. The specific interactions between the chiral ligand and reactant were investigated in solution with palladium nanoparticles, as well as under ultrahigh vacuum (UHV) conditions on the palladium metal surface in the absence of hydrogen. The reactions were explored using nuclear magnetic resonance (NMR) spectroscopy, scanning tunneling microscopy (STM), and high-resolution photoemission spectroscopy (HRPES) combined with density functional theory (DFT) calculations. A NMR study identified the interaction between both molecules with palladium nanoparticles in solution. In addition, STM and HRPES studies revealed the spatial distribution and configuration of both compounds on the palladium metal surface under UHV conditions. The theoretical results support the experimental results with respect to the interaction energy value. It was found that the reaction between the ligand and reactant occurs with hydrogen bonding on palladium surface, simultaneously. The present study provides mechanistic details of the asymmetric hydrogenation reaction, which bears a correlation between the ligand, reactant, and catalyst during the reaction.

Surface-Assisted Cyclodehydrogenation; Break the Symmetry, Enhance the Selectivity

Selectivity in chemical reactions is a major objective in industrial processes to minimize spurious byproducts and to save scarce resources. In homogeneous catalysis the most important factor which determines selectivity is structural symmetry. However, a transfer of the symmetry concept to heterogeneous catalysis still requires a detailed comprehension of the underlying processes. Here, we investigate a ring-closing reaction in surface-confined meso-substituted porphyrin molecules by scanning tunneling microscopy, temperature-programmed desorption, and computational modeling. The identification of reaction intermediates enables us to analyze the reaction pathway and to conclude that the symmetry of the porphyrin core is of pivotal importance regarding product yields.

Enantiospecific Adsorption of Amino Acids on Naturally Chiral Cu{3,1,17}R&S Surfaces

Gas-phase equilibrium adsorption of D- and L-serine (Ser) mixtures and D- and L-phenylalanine (Phe) mixtures has been studied on the naturally chiral Cu{3,1,17}(R&S) surfaces. (13)C labeling of the l enantiomers (*L-Ser and *L-Phe) has enabled mass spectrometric enantiodiscrimination of the species desorbing from the surface following equilibrium adsorption. On the Cu{3,1,17}(R&S) surfaces, both equilibrium adsorption and the thermal decomposition kinetics of the D and *L enantiomers exhibit diastereomerism. Following exposure of the surfaces to D/*L mixtures, the relative equilibrium coverages of the two enantiomers are equal to their relative partial pressures in the gas phase, θ(D)/θ(*L) = P(D)/P(*L). This implies that adsorption is not measurably enantiospecific. The decomposition kinetics of Ser are enantiospecific whereas those of Phe are not. Comparison of these results with those for aspartic acid, alanine, and lysine suggests that enantiospecific adsorption on the naturally chiral Cu surfaces occurs for those amino acids that have side chains with functional groups that allow strong interactions with the surface. There is no apparent correlation between amino acids that exhibit enantiospecific adsorption and those that exhibit enantiospecific decomposition kinetics.

Cellulose Nanocrystals as Chiral Inducers: Enantioselective Catalysis and Transmission Electron Microscopy 3D Characterization

Cellulose nanocrystals (CNCs), derived from cellulose, provide us with an opportunity to devise more sustainable solutions to current technological challenges. Enantioselective catalysis, especially heterogeneous, is the preferred method for the synthesis of pure chiral molecules in the fine chemical industries. Cellulose has been long sought as a chiral inducer in enantioselective catalysis. We report herein an unprecedentedly high enantiomeric excess (ee) for Pd patches deposited onto CNCs used as catalysts for the hydrogenation of prochiral ketones in water at room temperature and 4 bar H2. Our system, where CNCs acted as support and sole chiral source, achieved an ee of 65% with 100% conversions. Cryo-electron microscopy, high-resolution transmission electron microscopy, and tomography were used for the first time to study the 3D structure of a metal functionalized CNC hybrid. It established the presence of sub-nanometer-thick Pd patches at the surface of CNCs and provided insight into the chiral induction mechanism.

Controlling Catalytic Selectivity via Adsorbate Orientation on the Surface: From Furfural Deoxygenation to Reactions of Epoxides

Specificity to desired reaction products is the key challenge in designing solid catalysts for reactions involving addition or removal of oxygen to/from organic reactants. This challenge is especially acute for reactions involving multifunctional compounds such as biomass-derived aromatic molecules (e.g., furfural) and functional epoxides (e.g., 1-epoxy-3-butene). Recent surface-level studies have shown that there is a relationship between adsorbate surface orientation and reaction selectivity in the hydrogenation pathways of aromatic oxygenates and the ring-opening or ring-closing pathways of epoxides. Control of the orientation of reaction intermediates on catalytic surfaces by modifying the surface or near-surface environment has been shown to be a promising method of affecting catalytic selectivity for reactions of multifunctional molecules. In this Perspective, we review recent model studies aimed at understanding the surface chemistry for these reactions and studies that utilize this insight to rationally design supported catalysts.

The effect of particle size and ligand configuration on the asymmetric catalytic properties of proline-functionalized Pt-nanoparticles

Particle size alters activity but not stereoselectivity of ligand-functionalized nanoparticles suggesting that stereoselectivity is primarily determined by the ligand–reactant combination.

The first 4,4′-imidazolium-tagged C2-symmetric bis(oxazolines): application in the asymmetric Henry reaction

Highly efficient and recyclable imidazolium-tagged bis(oxazolines), with an imidazolium tagged onto the 4,4′-position of the box, have been designed and prepared for the first time.

Heterogeneous asymmetric hydrogenation over chiral molecule-modified metal particles

Recent progress in heterogeneous asymmetric hydrogenation over chiral molecule-modified metal particles has been reviewed.

Adsorption and stability of chiral modifiers based on 1-(1-naphthyl)-ethylamine for Pt catalysed heterogeneous asymmetric hydrogenations

Catalytic and in situ ATR-IR spectroscopic investigations provide mechanistic insight relevant to heterogeneous asymmetric hydrogenation on Pt catalyst using naphthylethylamine-based modifiers.

Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy

Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (<1 s) enables to quasi simultaneously follow the heterogeneously catalysed reaction at the catalytic interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

C2H2 treatment as a facile method to boost the catalysis of Pd nanoparticulate catalysts

A facile method to boost the catalysis of Pd nanoparticulate catalysts by simple C2H2 treatment is developed. During the C2H2 treatment, Pd nanoparticles serve as active catalysts to polymerize C2H2 into trans-polyacetylene. The deposition of trans-polyacetylene layer on Pd nanoparticles makes their surface hydrophobic. Such a hydrophobic surface modification helps to accumulate more hydrophobic substrates during catalysis, making the modified Pd nanoparticulate catalysts more active than untreated catalysts in the catalytic reaction involving hydrophobic substrates. Moreover, the coating of polyacetylene on Pd creates encapsulated Pd nanocatalysts, stabilizing Pd nanoparticles against sintering or aggregation. Since the catalytic polymerization of polyacetylene on Pd is not facet dependent, the development is readily applied to enhance the catalysis of commercial Pd nanoparticulate catalysts by simple C2H2 treatment.

Enantio- and chemoselective Brønsted-acid/Mg(nBu)2 catalysed reduction of α-keto esters with catecholborane

The first enantio- and chemoselective Brønsted-acid catalysed reduction of α-keto esters with catecholborane has been developed.