Photobiocatalytic production of hydrogen using sensitized TiO2–MV2+ system coupled Rhodopseudomonas capsulata

Enhancement of biohydrogen production by photo-fermentation of corn stover via visible light catalyzed titanium dioxide/activated carbon fiber

In this study, titanium dioxide/activated carbon fiber (TiO2/ACF) was synthesized by liquid-phase deposition method and the effect of TiO2/ACF on the performance of photo-fermentation biohydrogen production (PFHP) from corn stover under visible light catalysis was discussed. Results show the maximum cumulative hydrogen yield (CHY) obtained under the optimal conditions was 74.0 ± 1.3 mL/g TS with TiO2/ACF addition of 100 mg/L, which was twice that without TiO2/ACF addition (36.9 ± 1.0 mL/g TS). Initial pH value had the most significant effect on CHY. The addition of TiO2/ACF promoted the metabolic pathway of nitrogenase to reduce H+ produced by consuming acetic acid and butyric acid to hydrogen, and also shortened the photo-fermentation period. By scanning electron microscopy and X-ray diffraction analysis, the morphology and phase structure of TiO2/ACF after PFHP did not change significantly. This study laid the foundation for the reuse of TiO2 and its practical application in PFHP.

Photo-Electro-Biochemical H2 Production Using the Carbon Material-Based Cathode Combined with Genetically Engineered Escherichia coli Whole-Cell Biocatalysis

Abio/bio hybrids, which incorporate biocatalysts that promote efficient and selective material conversions under mild conditions into existing catalytic reactions, have attracted considerable attention for developing new catalytic systems. This study constructed a H2 -forming biocathode based on a carbon material combined with whole-cell biocatalysis of genetically-engineered-hydrogenase-overproducing Escherichia coli for the photoelectrochemical water splitting for clean H2 production. Low-cost and abundant carbon materials are generally not suitable for H2 -forming cathode due to their high overpotential for proton reduction; however, the combination of the reduction of an organic electron mediator on the carbon electrode and the H2 formation with the reduced mediator by the redox enzyme hydrogenase provides a H2 -forming cathodic reaction comparable to that of the noble metal electrode. The present study demonstrates that the recombinant E. coli whole cell can be employed as a part of the H2 -forming biocathode system, and the biocathode system wired with TiO2 photoanode can be a photoelectrochemical water-splitting system without external voltage assistance under natural pH. The findings of this study expand the feasibility of applications of whole-cell biocatalysis and contribute to obtaining solar-to-chemical conversions by abio/bio hybrid systems, especially for low-cost, noble-metal-free, and clean H2 production.

Making the connections: physical and electric interactions in biohybrid photosynthetic systems

Biohybrid photosynthesis systems, which combine biological and non-biological materials, have attracted recent interest in solar-to-chemical energy conversion. However, the solar efficiencies of such systems remain low, despite advances in both artificial photosynthesis and synthetic biology. Here we discuss the potential of conjugated organic materials as photosensitisers for biological hybrid systems compared to traditional inorganic semiconductors. Organic materials offer the ability to tune both photophysical properties and the specific physicochemical interactions between the photosensitiser and biological cells, thus improving stability and charge transfer. We highlight the state-of-the-art and opportunities for new approaches in designing new biohybrid systems. This perspective also summarises the current understanding of the underlying electron transport process and highlights the research areas that need to be pursued to underpin the development of hybrid photosynthesis systems.

Biophotoelectrochemistry for renewable energy and environmental applications

Biophotoelectrochemistry (BPEC) is an interdisciplinary research field and combines bioelectrochemistry and photoelectrochemistry through the utilization of the catalytic abilities of biomachineries and light harvesters to accomplish the production of energy or chemicals driven by solar energy. The BPEC process may act as a new approach for sustainable green chemistry and waste minimization. This review provides the state-of-the-art introduction of BPEC basics and systems, with a focus on light harvesters and biocatalysts, configurations, photoelectron transfer mechanisms, and the potential applications in energy and environment. Several examples of BPEC applications are discussed including H2 production, CO2 reduction, chemical synthesis, pollution control, and biogeochemical cycle of elements. The challenges about BPEC systems are identified and potential solutions are proposed. The review aims to encourage further research of BPEC toward development of practical BPEC systems for energy and environmental applications.

Photo-biohydrogen Production by Photosensitization with Biologically Precipitated Cadmium Sulfide in Hydrogen-Forming Recombinant Escherichia coli

An inorganic-biological hybrid system that integrates features of both stable and efficient semiconductors and selective and efficient enzymes is attractive for facilitating the conversion of solar energy to hydrogen. In this study, we aimed to develop a new photocatalytic hydrogen-production system based on Escherichia coli whole-cell genetically engineered as a biocatalysis for highly active hydrogen formation. The photocatalysis part was obtained by bacterial precipitation of cadmium sulfide (CdS), which is a visible-light-responsive semiconductor. The recombinant E. coli cells were sequentially subjected to CdS precipitation and heterologous [FeFe]-hydrogenase synthesis to yield a CdS@E. coli hybrid capable of light energy conversion and hydrogen formation in a single cell. The CdS@E. coli hybrid achieved photocatalytic hydrogen production with a sacrificial electron donor, thus demonstrating the feasibility of our system and expanding the current knowledge of photosensitization using a whole-cell biocatalyst with a bacterially precipitated semiconductor.

Semi-biological approaches to solar-to-chemical conversion

This review provides an overview of the cross-disciplinary field of semi-artificial photosynthesis, which combines strengths of biocatalysis and artificial photosynthesis to develop new concepts and approaches for solar-to-chemical conversion.

A surface-display biohybrid approach to light-driven hydrogen production in air

Solar-to-chemical production by artificial and bioinspired photosynthetic systems is of tremendous interest to help solve current global energy and environmental problems. We developed a bioinorganic hybrid system for photocatalytic hydrogen production under aerobic conditions by combining light-harvesting semiconductors, hydrogenase catalysis, and self-aggregation of whole bacterial cells. We induced hydrogen production via self-photosynthesis in engineered Escherichia coli cells, which were originally designed for bioremediation, with in situ biosynthesis of biocompatible cadmium sulfide nanoparticles using a surface-display system. We also introduced a biomimetic silica encapsulation strategy into the engineered E. coli cells, enabling this hybrid system to continuously produce hydrogen for 96 hours, even under natural aerobic conditions. This biohybrid catalytic approach may serve as a general strategy for solar-to-chemical production.