Enhancing effect of Tween-80 on lipase performance in enantioselective hydrolysis of ketoprofen ester

Ultrasensitive Nanofiber Biosensor: Rapid In Situ Chromatic Detection of Bacteria for Healthcare Innovation

Rapid detection of bacterial presence in skin wounds is crucial to prevent the transition from acute to chronic wounds and the onset of systemic infections. Current methods for detecting infections, particularly at low concentrations (<1.0 × 105 CFU/cm2), often require complex technologies and direct sampling, which can be invasive and time-consuming. Addressing this gap, we introduce a colorimetric nanofibrous biosensor enabling real-time in situ monitoring of bacterial concentrations in wounds. This biosensor employs a colorimetric hemicyanine dye (HCy) probe, which changes color in response to bacterial lipase, a common secretion in infected wounds. To enhance the biosensor's sensitivity, we incorporated two key materials science strategies: aligning the nanofibers to promote efficient bacterial attachment and localization and integrating Tween 80, a surfactant, within the nanofiber matrix. This combination of physical and chemical cues results in a notable increase in lipase activity. The cross-aligned core-shell nanofibers, embedded with Tween 80 and HCy, demonstrate an immediate and distinct color change when exposed to as low as 3.0 × 104 CFU/cm2 of common pathogens such as Pseudomonas aeruginosa and MRSA. Significantly, the presence of Tween 80 amplifies the colorimetric response, making visual detection more straightforward and four times more pronounced. Our nanobiosensor design facilitates the detection of low-concentration bacterial infections in situ without the need to remove wound dressings. This advancement marks a significant step forward in real-time wound monitoring, offering a practical tool for the early detection of clinical bacterial infections.

Optimization of κ-Selenocarrageenase Production by Pseudoalteromonas sp. Xi13 and Its Immobilization

The bioenzymatic production of selenium oligosaccharides addresses the problems resulting from high molecular weight and poor water solubility of κ-selenocarrageenan, and lays foundation for its application as adjuvant drugs for cancer treatment and food additive. κ-selenocarrageenase extracted from Pseudoalteromonas sp. Xi13 can degrade κ-selenocarrageenan to selenium oligosaccharides. The maximum optimized κ-selenocarrageenase activity using Response Surface Methodology (RSM) was increased by 1.4 times, reaching 8.416 U/mL. To expand applications of the κ-selenocarrageenase in industry, the preparation conditions of it in either lyophilized or immobilized form were investigated. The activity recovery rate of the lyophilized enzyme was >70%, while that of the immobilized enzyme was 62.83%. However, the immobilized κ-selenocarrageenase exhibits good stability after being reused four times, with 58.28% of residual activity. The selenium content of κ-selenocarrageenan oligosaccharides degraded by the immobilized κ-selenocarrageenase was 47.06 µg/g, 8.3% higher than that degraded by the lyophilized enzyme. The results indicate that the immobilized κ-selenocarrageenase is suitable for industrial applications and has commercial potential.

Rhamnolipid increases H2S generation from waste activated sludge anaerobic fermentation: An overlooked concern

Rhamnolipid (RL), one representative biosurfactant, is widely regarded as an economically feasible and environmentally beneficial additive to improve fermentation efficiency and resource recovery from waste activated sludge (WAS). However, its potentially detrimental impact on WAS fermentation such as H₂S generation was overlooked previously. This study therefore aims to fill the gap through exploring whether and how the presence of RL affects H₂S generation from WAS anaerobic fermentation. Experimental results showed that when RL increased from 0 to 40 mg/g total suspended solids (TSS), the cumulative H₂S yield enhanced from 323.6 ×  10^-4 to 620.3 ×  10^-4 mg/g volatile suspended solids (VSS). Mechanism analysis showed that RL reduced WAS surface tension, which benefited transformations of organic sulfurs (e.g., aliphatic-S and sulfoxide) and inorganic sulfate from solid to liquid phase. The presence of RL not only reduced the ratio of α-helix/(β-sheet + random coil) and damaged the hydrogen bonding networks of organic sulfurs but also promoted substrate surface charges and cell membrane permeability. These facilitated the contact between hydrolase and organic sulfurs, thereby increasing sulfide production from organic sulfurs hydrolysis. Further investigations showed that RL promoted the expression of key genes (e.g., aprA/B and dsrA/B) involved in the dissimilatory sulfate reduction, which accelerated the reaction of adenosine 5'-phosphosulfate (APS)→ sulfite→ sulfide. Meanwhile, RL inhibited the corresponding key genes such as CysH, and Sir, responsible for assimilatory sulfate reduction (APS→3'-phosphoadenosine-5'phosphosulfate→organosulfur), which reduced substrate competition in favor of H₂S production from dissimilatory sulfate reduction. Besides, RL decreased the fermentation pH, which benefited the transformation of HS^- to H₂S.

Immobilization and bioimprinting strategies to enhance the performance in organic medium of the metagenomic lipase LipC12

The present work evaluates the immobilization of LipC12 on different supports in tandem with bioimprinting technique, in order to improve its activity and stability in organic medium. Oleic acid was selected as the bioimprinting molecule. The immobilized LipC12 was applied in the synthesis of pentyl oleate by esterification reaction and in the production of fatty acids, mono, and diglycerides via hydrolysis of triacylglycerols, in n-heptane reaction media. For all immobilized lipase preparations, an increase in the conversion of oleic acid to pentyl oleate was observed when immobilization in tandem with bioimprinting treatment was carried out versus immobilization without bioimprinting. The highest conversions were achieved using LipC12 immobilized on hydrophobic supports. The reuse potential of the immobilized preparations was evaluated. The preparations were used in eight successive cycles of esterification reactions and the best results were obtained for LipC12 immobilized on Immobead 150 and chitosan. The activity for the hydrolysis of soybean oil was improved by bioimprinting treatment only for LipC12 immobilized on commercial polypropylene and Accurel MP-1000. LipC12 immobilized on hydrophilic supports or on Immobead150 could be used to hydrolyze tricaprylin to obtain diglycerides with a high proportion of 1,2-diglycerides in reaction times as short as 30 min.

Lipase Assisted (S)-Ketoprofen Resolution from Commercially Available Racemic Mixture

Ketoprofen is a commercially available drug sold as a racemic mixture that belongs to the family of non-steroidal anti-inflammatory drugs known as profens. It has been demonstrated (in vitro) that (S)-ketoprofen is around 160 times more potent than its enantiomer (R)-ketoprofen, while accumulation of (R)-ketoprofen can cause serious side effects, such as dyspepsia, gastrointestinal ulceration/bleeding, pain, salt and fluid retention, and hypertension. In this work, four commercially available lipases were systematically assessed. Parameters such as conversion, enantiomeric excess, and enantioselectivity were considered. Among them, and by evaluating lipase load, temperature, solvent, and alcohol, Candida rugosa lipase exhibited the best results in terms of enantioselectivity E = 185 ((S)-enantiopreference) with esterification conversions of c = 47% (out of 50%) and enantiomeric excess of 99%. The unreacted (R)-enantiomer was recovered by liquid-liquid extraction and racemized under basic media, which was recycled as starting material. Finally, the (S)-alkyl ketoprofen ester was successfully enzymatically hydrolyzed to the desired (S)-ketoprofen with c = 98.5% and 99% ee. This work demonstrated the benefit and efficiency of using Candida rugosa lipase to kinetically resolve racemic ketoprofen by an environmentally friendly protocol and with the recycling of the undesired (R)-ketoprofen.

Extracellular polymeric substances trigger an increase in redox mediators for enhanced sludge methanogenesis

Artificial redox mediators can be employed to improve the electron transfer efficiency during sludge methanogenesis, whereas these artificial redox mediators have possible deficiencies, such as high cost and non-biodegradability. For large-scale commercial applications, more cost-effective and environmentally friendly alternatives should be developed. Herein, the potential of extracellular polymeric substances (EPS) as natural redox mediators to improve methanogenesis was investigated. Compared to the control test without EPS addition, the methane (CH₄) production yield was increased by 83.5 ± 2.4% with an EPS dosage of 0.50 g/L and the lag phase duration was shortened by 45.6 ± 7.0%, along with the enhanced sludge dewaterability. Spectroelectrochemical measurements implied that EPS addition notably changed the intensities of different redox-active groups, which decreased the charge transfer resistance and enhanced the extracellular electron transfer efficiency. These redox-active groups were mainly from the solubilization and hydrolysis of sludge protein due to increased protease activities, thereby leading to a higher acetate concentration during the acidification step. Further investigation showed that EPS addition also improved the activities of both acetotrophic and hydrogenotrophic methanogens, as indicated by a higher abundance of alpha subunit of methyl coenzyme M reductase (mcrA) genes, enhancing CH₄ production. This work provides an innovative strategy for improving sludge anaerobic digestion with efficient additives.

Effect of Tween Type Non-Ionic Detergent on the Activity of Lipase of Pseudomonas aeruginosa

Pseudomonas aeruginosa is a Gram-negative and rod-shaped bacterium. It can use a variety of carbon sources and grow in different culture media. Its versatile extracellular enzymes give it the ability to grow on complex carbon sources. One of the most important enzymes of this bacterium is lipase, which is an extracellular enzyme. Lipases are one of the most useful enzymes in medicine and industry, especially in the detergent industry. In recent years, lipases have become an important component of detergent powders, so it is important to evaluate the performance of lipases in the presence of detergents. The aim of this study was to investigate the effect of non-ionic detergents Tween 20 and 80 on the activity of the Pseudomonas lipase. These detergents reduced Km and increased Vmax of the enzyme. The enzyme activity increased in the presence of these detergents at optimal pH and temperature. Conformational studies with the purified enzyme by fluorescence spectrophotometry showed that in the presence of Tween 20 and 80, there was a hypochromicity in emission peak of the enzyme, which indicated that the enzyme became less compact in vicinity of these detergents.

Formulation and Structural Study of a Biocompatible Water-in-Oil Microemulsion as an Appropriate Enzyme Carrier: The Model Case of Horseradish Peroxidase

A novel biocompatible water-in-oil microemulsion was developed using nonionic surfactants and was investigated as a potential enzyme delivery system for pharmaceutical applications. The system was composed of isopropyl myristate/polysorbate 80 (Tween 80)/distilled monoglycerides/water/propylene glycol (PG), had a low total surfactant concentration (8.3% w/w), and was able to incorporate approximately 3% w/w aqueous phase containing horseradish peroxidase (HRP). Structural and activity aspects of the system were studied using a variety of techniques such as dynamic light scattering (DLS), electron paramagnetic resonance (EPR), and dynamic interfacial tension. The apparent hydrodynamic diameter of the empty droplets was calculated at about 37 nm. Different enzyme concentrations, ranging from 0.01 to 1.39 μM, were used for both DLS and EPR studies to effectively determine the localization of the macromolecule in the microemulsion. According to the results, for high enzyme concentrations, a participation of HRP in the surfactant monolayer of the microemulsion is evident. The number of reverse micelles in the microemulsion was defined by a theoretical model and was used to clarify how the enzyme concentration affects the number of empty and loaded reverse micelles. To assure that the system allows the enzyme to retain its catalytic activity, an oxidative reaction catalyzed by HRP was successfully carried out with the use of the model substrate 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonic acid]. The influence of several parameters such as temperature, pH, and PG concentration was examined to optimize the reaction conditions, and a kinetic study was conducted revealing an ordered-Bi-Bi mechanism. Values of all kinetic parameters were determined. The release of the encapsulated enzyme was studied using an adequate receiver phase, revealing the effectiveness of the proposed microemulsion not only as a microreactor but also as a carrier for therapeutic biomolecules.

Cloning, expression and characterization of the esterase estUT1 from Ureibacillus thermosphaericus which belongs to a new lipase family XVIII

A new esterase gene from thermophilic bacteria Ureibacillus thermosphaericus was cloned into the pET32b vector and expressed in Escherichia coli BL21(DE3). Alignment of the estUT1 amino acid sequence revealed the presence of a novel canonical pentapeptide (GVSLG) and 41-47% identity to the closest family of the bacterial lipases XIII. Thus the esterase estUT1 from U. thermosphaericus was assigned as a member of the novel family XVIII. It also showed a strong activity toward short-chain esters (C2-C8), with the highest activity for C2. When p-nitrophenyl butyrate is used as a substrate, the temperature and pH optimum of the enzyme were 70-80 °C and 8.0, respectively. EstUT1 showed high thermostability and 68.9 ± 2.5% residual activity after incubation at 70 °C for 6 h. Homology modeling of the enzyme structure showed the presence of a putative catalytic triad Ser93, Asp192, and His222. The activity of estUT1 was inhibited by PMSF, suggesting that the serine residue is involved in the catalytic activity of the enzyme. The purified enzyme exhibited high stability in organic solvents. EstUT1 retained 85.8 ± 2.4% residual activity in 30% methanol at 50 °C for 6 h. Stability at high temperature and tolerance to organic solvents make estUT1 a promising enzyme for biotechnology application.

Pullulan production from synthetic medium by a new mutant of Aureobasidium pullulans

Pullulan with different molecular-weight could be applied in various fields. A UV-induced mutagenesis Aureobasidium pullulans UVMU6-1 was obtained from the strain A. pullulans CGMCC3.933 for the production of low-molecular-weight pullulan. First, the obtained polysaccharide from A. pullulans UVMU6-1 was purified and identified to be pullulan with thin-layer chromatography, Fourier transform infrared, and nuclear magnetic resonance. Then, culture medium and conditions for this strain were optimized by flask fermentation. Based on the optimized medium and culture conditions (pH 4, addition of 4 g/L Tween 80 for 96 hr of cultivation), continuously fermentation was performed. The highest pullulan production and dry biomass was 109 and 125 g/L after fermentation for 114 hr, respectively. The average productivity was about 1 g/L/hr, which was intensively higher than the previous reported. This study would lay foundations for the industrial production of pullulan.

Relevance and bio-catalytic strategies for the kinetic resolution of ketoprofen towards dexketoprofen

This review presents the most relevant investigations concerning the biocatalytic kinetic resolution of racemic ketoprofen to dexketoprofen for the last 22 years. The advantages related to the administration of the dex-enantiomer in terms of human health, the so called "chiral switch" in the pharmaceutical industry and the sustainability of biotransformations have been the driving forces to develop innovative technology to obtain dexketoprofen. In particular, the kinetic resolution of racemic ketoprofen through enantiomeric esterification and hydrolysis using lipases as biocatalysts are thoroughly revised and commented upon. In this context, the biocatalysts, acyl-acceptors (alcohols), reaction conditions, conversion, enantiomeric excess, and enantiomeric ratio among others are discussed. Moreover, the investigations concerning scaling up processes in order to obtain an optically pure enantiomer of the profen are presented. Finally, some guidelines about perspectives of the technology and research opportunities are given.

Crystal structure and characterization of esterase Est25 mutants reveal improved enantioselectivity toward (S)-ketoprofen ethyl ester

Esterases comprise a group of enzymes that catalyze the cleavage and synthesis of ester bonds. They are important in biotechnological applications owing to their enantioselectivity, regioselectivity, broad substrate specificity, and the fact that they do not require cofactors. In a previous study, we isolated the esterase Est25 from a metagenomic library. Est25 showed catalytic activity toward the (R,S)-ketoprofen ethyl ester but had low enantioselectivity toward the (S)-ketoprofen ethyl ester. Because (S)-ketoprofen has stronger anti-inflammatory effects and fewer side effects than (R)-ketoprofen, enantioselectivity of this esterase is important. In this study, we generated Est25 mutants with improved enantioselectivity toward the (S)-ketoprofen ethyl ester; improved enantioselectivity of mutants was established by analysis of their crystal structures. The enantioselectivity of mutants was influenced by substitution of Phe72 and Leu255. Substituting these residues changed the size of the binding pocket and the entrance hole that leads to the active site. The enantioselectivity of Est25 (E = 1.1 ± 0.0) was improved in the mutants F72G (E = 1.9 ± 0.2), L255W (E = 16.1 ± 1.1), and F72G/L255W (E = 60.1 ± 0.5). Finally, characterization of Est25 mutants was performed by determining the optimum reaction conditions, thermostability, effect of additives, and substrate specificity after substituting Phe72 and Leu255.

Effects of Tween 80 on Growth and Biofilm Formation in Laboratory Media

Tween 80 is a widely used non-ionic emulsifier that is added to cosmetics, pharmaceuticals, and foods. Because of its widespread use we need to understand how it affects bacteria on our skin, in our gut, and in food products. The aim of this study is to investigate how Tween 80 affects the growth and antimicrobial susceptibility of Staphylococcus aureus, Listeria monocytogenes, and Pseudomonas fluorescens, which are common causes of spoilage and foodborne illnesses. Addition of 0.1% Tween 80 to laboratory growth media increased the growth rate of planktonic S. aureus batch cultures, and it also increased the total biomass when S. aureus was grown as biofilms. In contrast, Tween 80 had no effect on batch cultures of L. monocytogenes, it slowed the growth rate of P. fluorescens, and it led to formation of less biofilm by both L. monocytogenes and P. fluorescens. Furthermore, Tween 80 lowered the antibacterial efficacy of two hydrophobic antimicrobials: rifampicin and the essential oil isoeugenol. Our findings underline the importance of documenting indirect effects of emulsifiers when studying the efficacy of hydrophobic antimicrobials that are dispersed in solution by emulsification, or when antimicrobials are applied in food matrixes that include emulsifiers. Furthermore, the species-specific effects on microbial growth suggests that Tween 80 in cosmetics and food products could affect the composition of skin and gut microbiota, and the effect of emulsifiers on the human microbiome should therefore be explored to uncover potential health effects.

Effect of Additives on the Selectivity and Reactivity of Enzymes

Enzymes have been widely used as efficient, eco-friendly, and biodegradable catalysts in organic chemistry due to their mild reaction conditions and high selectivity and efficiency. In recent years, the catalytic promiscuity of many enzymes in unnatural reactions has been revealed and studied by chemists and biochemists, which has expanded the application potential of enzymes. To enhance the selectivity and activity of enzymes in their natural or promiscuous reactions, many methods have been recommended, such as protein engineering, process engineering, and media engineering. Among them, the additive approach is very attractive because of its simplicity to use and high efficiency. In this paper, we will review the recent developments about the applications of additives to improve the catalytic performances of enzymes in their natural and promiscuous reactions. These additives include water, organic bases, water mimics, cosolvents, crown ethers, salts, surfactants, and some particular molecular additives.

Insights into the protective role of solid lipid nanoparticles on rosmarinic acid bioactivity during exposure to simulated gastrointestinal conditions

The evaluation of the digestion effects on bioactive solid lipid nanoparticles (SLN) was performed. For this purpose, witepsol and carnauba SLN loaded with rosmarinic acid (RA) were exposed to the simulated gastrointestinal tract (GIT) conditions prevailing in stomach and small intestine. The simulation of intestinal epithelium was made with a dialysis bag and intestinal cell culture lines. Changes on SLN physical properties, RA release and absorption profiles were followed at each step. Combination of digestion pH and enzymes showed a significant effect upon SLN physical properties. Zeta potential values increased at stomach conditions and decreased at small intestine simulation. Also, at intestine, SLN increased their sizes and released 40-60% of RA, maintaining its initial antioxidant activity values. Sustained release of 40% of RA from SLN was also observed in dialysis tube. At CaCo-2 cell line, both types of SLN showed similar absorbed RA % (ca. 30%). Nevertheless, in CaCo-2/HT29x mix cell lines, for carnauba SLN a lower adsorption RA % was observed than for witepsol SLN. Solid lipid nanoparticles protected RA bioactivity (in terms of antioxidant activity) until reaching the intestine. A controlled release of RA from SLN was achieved and a significant absorption was observed at intestinal cells. Overall, SLN produced with witepsol showed a higher stability than carnauba SLN.

Purification and characterization of polysaccharides degradases produced by Alteromonas sp. A321

Two different degradases from Alteromonas sp. A321 for polysaccharides from Enteromorpha prolifera (DPE-L and DPE-P) were purified to homogeneity. The molecular weights of purified DPE-L and DPE-P were 75.2 and 102.5 kDa, respectively, and their internal sequences were analysed by LC-MS-MS. The enzymes exhibited an optimum temperature of 30-40 °C (DPE-L) and 35-45 °C (DPE-P), an optimum pH of 7.0 (DPE-L) and 6.0 (DPE-P). DPE-P was highly stable in the presence of EDTA and 1,10-phenanthroline while DPE-L was inhibited by 1,10-phenanthroline. The Km values of DPE-L and DPE-P were 2.93 mg/ml and 0.31 mg/ml and the Vmax values were 6.11 μmol/min/ml and 2.88 μmol/min/ml, respectively. Results of HPLC and ESI-MS analyses showed that enzymatic products were: Rha1(SO3H)1, Rha1(SO3H)1Gluc1, Rha2(SO3H)2Gluc1, and Rha3(SO3H)3Gluc1Xyl1 by DPE-L, and Glu2, Glu3, plus Glu4 by DPE-P, respectively. Thus DPE-L and DPE-P can be used to produce oligosaccharides which potentially revealed more of structure of polysaccharides from E. prolifera.

Iterative multitarget evolution dramatically enhances the enantioselectivity and catalytic efficiency of Bacillus subtilis esterase towards bulky benzoate esters of dl-menthol

Structure-based directed evolution has been successfully applied to Bacillus subtilis esterase to produce a mutant with higher enantioselectivity and elevated efficiency.

Effect of humic acids with different characteristics on fermentative short-chain fatty acids production from waste activated sludge

Recently, the use of waste activated sludge to bioproduce short-chain fatty acids (SCFA) has attracted much attention as the sludge-derived SCFA can be used as a preferred carbon source to drive biological nutrient removal or biopolymer (polyhydroxyalkanoates) synthesis. Although large number of humic acid (HA) has been reported in sludge, the influence of HA on SCFA production has never been documented. This study investigated the effects on sludge-derived SCFA production of two commercially available humic acids (referred to as SHHA and SAHA purchased respectively from Shanghai Reagent Company and Sigma-Aldrich) that differ in chemical structure, hydrophobicity, surfactant properties, and degree of aromaticity. It was found that SHHA remarkably enhanced SCFA production (1.7-3.5 folds), while SAHA had no obvious effect. Mechanisms study revealed that all four steps (solubilization, hydrolysis, acidification, and methanogenesis) involved in sludge fermentation were unaffected by SAHA. However, SHHA remarkably improved the solubilization of sludge protein and carbohydrate and the activity of hydrolysis enzymes (protease and α-glucosidase) owing to its greater hydrophobicity and protection of enzyme activity. SHHA also enhanced the acidification step by accelerating the bioreactions of glyceradehyde-3P → d-glycerate 1,3-diphosphate, and pyruvate → acetyl-CoA due to its abundant quinone groups which served as electron acceptor. Further investigation showed that SHHA negatively influenced the activity of acetoclastic methanogens for its competition for electrons and inhibition on the reaction of acetyl-CoA → 5-methyl-THMPT, which caused less SCFA being consumed. All these observations were in correspondence with SHHA significantly enhancing the production of sludge derived SCFA.

Magnetic Cross-Linked Enzyme Aggregates (mCLEAs) of Candida antarctica lipase: an efficient and stable biocatalyst for biodiesel synthesis

Enzyme-catalyzed production of biodiesel is the object of extensive research due to the global shortage of fossil fuels and increased environmental concerns. Herein we report the preparation and main characteristics of a novel biocatalyst consisting of Cross-Linked Enzyme Aggregates (CLEAs) of Candida antarctica lipase B (CALB) which are covalently bound to magnetic nanoparticles, and tackle its use for the synthesis of biodiesel from non-edible vegetable and waste frying oils. For this purpose, insolubilized CALB was covalently cross-linked to magnetic nanoparticles of magnetite which the surface was functionalized with -NH2 groups. The resulting biocatalyst combines the relevant catalytic properties of CLEAs (as great stability and feasibility for their reutilization) and the magnetic character, and thus the final product (mCLEAs) are superparamagnetic particles of a robust catalyst which is more stable than the free enzyme, easily recoverable from the reaction medium and reusable for new catalytic cycles. We have studied the main properties of this biocatalyst and we have assessed its utility to catalyze transesterification reactions to obtain biodiesel from non-edible vegetable oils including unrefined soybean, jatropha and cameline, as well as waste frying oil. Using 1% mCLEAs (w/w of oil) conversions near 80% were routinely obtained at 30°C after 24 h of reaction, this value rising to 92% after 72 h. Moreover, the magnetic biocatalyst can be easily recovered from the reaction mixture and reused for at least ten consecutive cycles of 24 h without apparent loss of activity. The obtained results suggest that mCLEAs prepared from CALB can become a powerful biocatalyst for application at industrial scale with better performance than those currently available.

Efficient production of l-menthol in a two-phase system with SDS using an immobilized Bacillus subtilis esterase

Background

levo-Menthol is an important flavoring chemical, which can be prepared by enantioselective enzymatic hydrolysis of dl-menthyl esters. A recombinant esterase (BsE) cloned from Bacillus subtilis 0554 shows excellent enantioselectivity to dl-menthyl acetate and has been immobilized using cross-linked enzyme aggregates. Though BsE has relatively high substrate tolerance, the conversion of dl-menthyl acetate decreased sharply with the increase of substrate loading from 1 to 3 M in mono-aqueous system, which might be due to the severe inhibition of enzyme activity at extremely high load of substrate or product. In this work, enzymatic hydrolysis of dl-menthyl acetate with an extremely high load using the immobilized CLEA-BsE was investigated in an organic-aqueous biphasic system containing surfactant to establish a promising bioprocess for large-scale production of l-menthol.

Results

An efficient biphasic reaction system of pentanol-water containing sodium dodecyl sulfate (SDS) was developed for improving enantioselective hydrolysis of dl-menthyl acetate to produce l-menthol by immobilized BsE. Under the optimized reaction conditions, l-menthol was produced in >97% enantiomeric excess (ee) at a substrate load of up to 3.0 M with >40% conversion.

Conclusions

All the positive features demonstrate the potential applicability of the bioprocess for the large-scale production of l-menthol.

Increasing the activity and enantioselectivity of lipases by sol-gel immobilization: further advancements of practical interest

The entrapment of lipases in hydrophobic silicate matrices formed by sol-gel mediated hydrolysis of RSi(OCH3)3/Si(OCH3)4 as originally reported in 1996 has been improved over the years by a number of modifications. In the production of second-generation sol-gel lipase immobilizates, a variety of additives during the sol-gel process leads to increased activity and enhanced stereoselectivity in esterifying kinetic resolution. Recent advances in this type of lipase immobilization are reviewed here, in addition to new results regarding the sol-gel entrapment of the lipase from Burkholderia cepacia. It constitutes an excellent heterogeneous biocatalyst in the acylating kinetic resolution of two synthetically and industrially important chiral alcohols, rac-sulcatol and rac-trans-2-methoxycyclohexanol. The observation that the catalyst can be used 10 times in recycling experiments without losing its significant activity or enantioselectivity demonstrates the practical viability of the sol-gel approach.

Practical protocols for lipase immobilization via sol-gel techniques

Lipases can be efficiently entrapped in the pores of hydrophobic silicates by a simple and cheap sol-gel process in which a mixture of a hydrophobic alkylsilane RSi(OCH3)3 and Si(OCH3)4 is hydrolyzed under basic conditions in the presence of the enzyme. Additives such as isopropanol, polyvinyl alcohol, cyclodextrins, ionic liquids or surfactants enhance the efficiency of this type of lipase-immobilization. The main area of application of these heterogeneous biocatalysts concerns esterification or transesterification in organic solvents, ionic liquids, or supercritical carbon dioxide. Rate enhancements (relative to the traditional use of lipase powders) of several orders of magnitude have been observed, in addition to higher thermal stability. The lipase-immobilizates are particularly useful in the kinetic resolution of chiral esters, enantioselectivity often being higher than what is observed when using the commercial forms of these lipases (powder or classical immobilizates). Thus, due to the low price of sol-gel entrapment, the excellent performance of the lipase-immobilizates, and the ready recyclability, the method is industrially viable.

Identification and characterization of a novel cold-adapted esterase from a metagenomic library of mountain soil

A novel lipolytic enzyme was isolated from a metagenomic library after demonstration of lipolytic activity on an LB agar plate containing 1% (w/v) tributyrin. A novel esterase gene (estIM1), encoding a lipolytic enzyme (EstIM1), was cloned using a shotgun method from a pFosEstIM1 clone of the metagenomic library, and the enzyme was characterized. The estIM1 gene had an open reading frame (ORF) of 936 base pairs and encoded a protein of 311 amino acids with a molecular mass 34 kDa and a pI value of 4.32. The deduced amino acid sequence was 62% identical to that of an esterase from an uncultured bacterium (ABQ11271). The amino acid sequence indicated that EstIM1 was a member of the family IV of lipolytic enzymes, all of which contain a GDSAG motif shared with similar enzymes of lactic acid microorganisms. EstIM1 was active over a temperature range of 1–50°C, at alkaline pH. The activation energy for hydrolysis of p-nitrophenyl propionate was 1.04 kcal/mol, within a temperature range of 1–40°C. The activity of EstIM1 was about 60% of maximal even at 1°C, suggesting that EstIM1 is efficiently cold-adapted. Further characterization of this cold-adapted enzyme indicated that the esterase may be very valuable in industrial applications.

Enhancement of the activity and enantioselectivity of lipase by sol-gel encapsulation immobilization onto β-cyclodextrin-based polymer

Candida rugosa lipase was encapsulated within a chemically inert sol-gel support prepared by polycondensation with tetraethoxysilane and octyltriethoxysilane in the presence of β-cyclodextrin-based polymer. The catalytic activity of the encapsulated lipases was evaluated both in the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of racemic Naproxen methyl ester. It has been observed that the percent activity yield of the encapsulated lipase was 65 U/g, which is 7.5 times higher than that of the covalently immobilized lipase. The β-cyclodextrin-based encapsulated lipases had higher conversion and enantioselectivity compared with covalently immobilized lipase. The study confirms an excellent enantioselectivity (E >300) for the encapsulated lipase with an enantiomeric excess value of 98% for S-naproxen.