Catalytic and structural function of zinc for the hydantoinase from Arthrobacter aurescens DSM 3745

Characterization of zinc-binding properties of a novel imidase from Pseudomonas putida YZ-26

The imidase from Pseudomonas putida YZ-26 consisting of 293-amino acid residues is a novel imidase with four subunits as the holo-enzyme and low molecular weight which is significantly different from known mammalian imidase. This study measured the zinc-binding properties of the imidase using inductively coupled plasma-atomic emission spectrometry and competition assay combined with activity determinations. Results show that each subunit of the imidase binds the zinc ion by 1:1 stoichiometry with apparent binding constant of 9.5 x 10(8)M(-1). The activity of the apo-imidase (20 microM) was recovered with the addition of zinc in the lower concentration (0-20 microM), whereas the enzymatic activity is decreased in the presence of high concentration of zinc (above 100 microM). The site-directed mutagenesis of His(247), His(86) or Cys(7), Cys(108) in imidase resulted in loss of activity and zinc-binding abilities at different degrees, showing that these residues may critically affect both enzymatic activity and conformation.

Quantitative analysis and functional evaluation of zinc ion in the D-hydantoinase from Pseudomonas putida YZ-26

D-hydantoinase (HDT) is a metal-dependent enzyme that is widely used in industrial bioconversion to D-amino acids as valuable intermediates in the fields of food, pharmaceutical industry and agriculture. In this report, we prepared apo-HDT (metal-removed HDT) and Zn(2+)-HDT (Zn(2+)-added HDT) in vitro from a recombinant HDT (re-HDT) expressed in E. coli. The Zn(2+)-HDT and re-HDT contain 2.17 and 0.95 mol Zn(2+) per mol subunit, respectively, and they have comparable enzymatic activities. In contrast, the apo-HDT only retains 0.04 mol Zn(2+) per mol subunit with less than 10% activity, compared with the re-HDT. When the apo-HDT was reconstituted with ZnCl(2), the enzymatic activity recovery was about 75%. Moreover, the fluorescence intensity, circular dichroism spectra and thermo-stability of the apo-HDT and Zn(2+)-HDT are quite different from those of the re-HDT. These data suggest that the re-HDT may have two Zn(2+)-binding sites, one is an intrinsic or tight-binding site (zinc-alpha) essential for its activity and the other is a vacant or loose-binding site (zinc-beta) possibly non-essential for the activity.

Purification of industrial hydantoinase in one chromatographic step without affinity tag

Hydantoinase is used in industry as a biocatalyst for the production of optically pure D- or L-amino acids. Previously, homogeneous hydantoinase was obtained by multi-chromatographic purification procedures. Here, we reported a process that contained only a single chromatographic step to purify a recombinant hydantoinase to homogeneity. Hydantoinase from Agrobacterium radiobacter NRRL B11291 was expressed in Escherichia coli. The recombinant enzyme was purified following heat treatments, high concentration alcohol precipitation, and chelating Sephacel chromatography. The recombinant hydantoinase did not contain any affinity tags from the plasmid. This simplified procedure provided a convenient way to obtain hydantoinase in high yield (71%) and high purity. It should be very useful for further industrial application and for the study of the structure-function of hydantoinase.

Crystal structure of D-Hydantoinase from Burkholderia pickettii at a resolution of 2.7 Angstroms: insights into the molecular basis of enzyme thermostability

D-Hydantoinase (D-HYD) is an industrial enzyme that is widely used in the production of D-amino acids which are precursors for semisynthesis of antibiotics, peptides, and pesticides. This report describes the crystal structure of D-hydantoinase from Burkholderia pickettii (HYD(Bp)) at a 2.7-A resolution. The structure of HYD(Bp) consists of a core (alpha/beta)(8) triose phosphate isomerase barrel fold and a beta-sheet domain, and the catalytic active site consists of two metal ions and six highly conserved amino acid residues. Although HYD(Bp) shares only moderate sequence similarity with D-HYDs from Thermus sp. (HYD(Tsp)) and Bacillus stearothermophilus (HYD(Bst)), whose structures have recently been solved, the overall structure and the structure of the catalytic active site are strikingly similar. Nevertheless, the amino acids that compose the substrate-binding site are less conserved and have different properties, which might dictate the substrate specificity. Structural comparison has revealed insights into the molecular basis of the differential thermostability of D-HYDs. The more thermostable HYD(Tsp) contains more aromatic residues in the interior of the structure than HYD(Bp) and HYD(Bst). Changes of large aromatic residues in HYD(Tsp) to smaller residues in HYD(Bp) or HYD(Bst) decrease the hydrophobicity and create cavities inside the structure. HYD(Tsp) has more salt bridges and hydrogen-bonding interactions and less oxidation susceptible Met and Cys residues on the protein surface than HYD(Bp) and HYD(Bst). Besides, HYD(Tsp) also contains more rigid Pro residues. These factors are likely to make major contributions to the varying thermostability of these enzymes. This information could be exploited in helping to engineer more thermostable mesophilic enzymes.

Metal ion dependence of recombinant Escherichia coli allantoinase

Allantoinase is a suspected dinuclear metalloenzyme that catalyzes the hydrolytic cleavage of the five-member ring of allantoin (5-ureidohydantoin) to form allantoic acid. Recombinant Escherichia coli allantoinase purified from overproducing cultures amended with 2.5 mM zinc, 1 mM cobalt, or 1 mM nickel ions was found to possess approximately 1.4 Zn, 0.0 Co, 0.0 Ni, and 0.4 Fe; 0.1 Zn, 1.0 Co, 0.0 Ni, and 0.2 Fe; and 0.0 Zn, 0.0 Co, 0.6 Ni, and 0.1 Fe per subunit, respectively, whereas protein obtained from nonamended cultures contains near stoichiometric levels of iron. We conclude that allantoinase is incompletely activated in the recombinant cells, perhaps due to an insufficiency of a needed accessory protein. Enzyme isolated from nonsupplemented cultures possesses very low activity (k(cat) = 34.7 min(-1)) compared to the zinc-, cobalt-, and nickel-containing forms of allantoinase (k(cat) values of 5,000 and 28,200 min(-1) and 200 min(-1), respectively). These rates and corresponding K(m) values (17.0, 19.5, and 80 mM, respectively) are significantly greater than those that have been reported previously. Absorbance spectroscopy of the cobalt species reveals a band centered at 570 nm consistent with five-coordinate geometry. Dithiothreitol is a competitive inhibitor of the enzyme, with significant K(i) differences for the zinc and cobalt species (237 and 795 micro M, respectively). Circular dichroism spectroscopy revealed that the zinc enzyme utilizes only the S isomer of allantoin, whereas the cobalt allantoinase prefers the S isomer, but also hydrolyzes the R isomer at about 1/10 the rate. This is the first report for metal content of allantoinase from any source.

The role of metal on imide hydrolysis: metal content and pH profiles of metal ion-replaced mammalian imidase

Imidase catalyzes the hydrolysis of a variety of imides. The removal of metal from imidase eliminates its activity but does not affect its tetrameric and secondary structure. The reactivation of the apoenzyme with transition metal ions Co(2+), Zn(2+), Mn(2+), and Cd(2+) shows that imidase activity is linearly dependent on the amount of metal ions added. Ni(2+) and Cu(2+) are also inserted, one per enzyme subunit, into the apoimidase, but do not restore imidase activity. Enzyme activity with different metal replaced imidase varies significantly. However, the changes of the metal contents do not appear to affect the pK(a)s obtained from the bell-shaped pH profiles of metal reconstituted imidase. The metal-hydroxide mechanism for imidase action is not supported based on the novel findings from this study. It is proposed that metal ion in mammalian imidase functions as a Lewis acid, which stabilizes the developing negative charge of imide substrate in transition state.

D,L-Hydantoinase activity of an Ochrobactrum anthropi strain

AIMS

A microorganism with the ability to release methionine from D,L-(2-methylthioethyl) hydantoin (strain 245) was isolated from soil. The aim of this study was the identification of the strain and the adjustment of the conditions of growth and of the enzymatic reaction, in order to achieve high specific activities of bioconversion of the hydantoin.

METHODS AND RESULTS

Strain 245 was identified as Ochrobactrum anthropi. The strain grew at alkaline pH (up to 10.0) and its hydantoinase activity was found to be inducible by the substrate D,L-(2-methylthioethyl) hydantoin. The enzyme is also alkalostable, with a pH optimum of 9.0. Under these conditions, hydantoinase activity was significantly enhanced and its half life prolonged when 200 mmol l-1 ammonium and phosphate were added. The addition of Ca2+, Na+, Cu2+, Co2+, Mg2+, Zn2+ or Fe3+ (0.5 mmol l-1) to the reaction mixture increased the hydantoinase activity of strain 245 up to tenfold after 24 h of incubation, compared with unamended controls.

CONCLUSION

The adequate adjustment of some environmental parameters (pH, addition of inducer, presence of ammonium, phosphate, heavy metals and other ions) can considerably increase the D, L-hydantoinase activity of strain 245.

SIGNIFICANCE AND IMPACT OF THE STUDY

The findings reported here set up the initial conditions for a further application of strain 245 in the production of methionine from hydantoine.

X-ray structure of a dihydropyrimidinase from Thermus sp. at 1.3 A resolution

Dihydropyrimidinases (hydantoinases) catalyse the reversible hydrolytic ring-opening of cyclic diamides such as dihydropyrimidines in the catabolism of pyrimidines. In biotechnology, these enzymes find application in the enantiospecific production of amino acids from racemic hydantoins. The crystal structure of a D-enantio-specific dihydropyrimidinase from Thermus sp. (D-hydantoinase) was solved de novo by multiwavelength anomalous diffraction phasing. In spite of a large unit cell the D-hydantoinase crystals exhibit excellent diffraction properties. The structure was subsequently refined at 1.30 A resolution against native data. The core of D-hydantoinase consists of a (alpha/beta)(8)-barrel, which is flanked by a beta-sheet domain and some additional helices. In the active site, a carboxylated lysine residue and the catalytically active hydroxide ion bridge a binuclear zinc centre. The tertiary structure and shape of the active site show strong homology to that of ureases, dihydroorotases, and phosphotriesterases. The homology of the active site was exploited for in silicio docking of substrates in the active site. This could shed light both on the substrate binding in hydantoinases and on the recently highly discussed origin of the proton in the course of hydantoinase catalysis.

Barbiturase, a novel zinc-containing amidohydrolase involved in oxidative pyrimidine metabolism

Barbiturase, which catalyzes the reversible amidohydrolysis of barbituric acid to ureidomalonic acid in the second step of oxidative pyrimidine degradation, was purified to homogeneity from Rhodococcus erythropolis JCM 3132. The characteristics and gene organization of barbiturase suggested that it is a novel zinc-containing amidohydrolase that should be grouped into a new family of the amidohydrolases superfamily. The amino acid sequence of barbiturase exhibited 48% identity with that of herbicide atrazine-decomposing cyanuric acid amidohydrolase but exhibited no significant homology to other proteins, indicating that cyanuric acid amidohydrolase may have evolved from barbiturase. A putative uracil phosphoribosyltransferase gene was found upstream of the barbiturase gene, suggesting mutual interaction between pyrimidine biosynthesis and oxidative degradation. Metal analysis with an inductively coupled radiofrequency plasma spectrophotometer revealed that barbiturase contains approximately 4.4 mol of zinc per mol of enzyme. The homotetrameric enzyme had K(m) and V(max) values of 1.0 mm and 2.5 micromol/min/mg of protein, respectively, for barbituric acid. The enzyme specifically acted on barbituric acid, and dihydro-l-orotate, alloxan, and cyanuric acid competitively inhibited its activity. The full-length gene encoding the barbiturase (bar) was cloned and overexpressed in Escherichia coli. The kinetic parameters and physicochemical properties of the cloned enzyme were apparently similar to those of the wild-type.

Hydantoinases and related enzymes as biocatalysts for the synthesis of unnatural chiral amino acids

A cascade of hydantoinase, N-carbamoylase and hydantoinracemase can be used for the production of natural and unnatural chiral D- and L-amino acids from chemically synthesized hydantoin derivatives. Potentially, 100% conversion and 100% optically pure amino acids can be obtained at the same time if racemic substrates are used. Recent research activities concentrate on newly isolated or improved enzymes and include directed evolution techniques, structure elucidation, studies of fusion proteins and the use of specially designed whole cell biocatalysts.

Optimization of the immobilization parameters and operational stability of immobilized hydantoinase and l-N-carbamoylase from Arthrobacter aurescens for the production of optically pure l-amino acids

2The immobilization parameters were optimized for the hydantoinase and the L-N-carbamoylase from Arthrobacter aurescens DSM 3747 or 3745, respectively. To optimize activity yields and specific activities for the immobilization to Eupergit C, Eupergit C 250 L, and EAH-Sepharose wild-type, recombinant and genetically modified ('tagged') enzymes were investigated concerning the influence of the protein concentration, the kind of support and the immobilization method. For both enzymes, the use of the recombinant proteins resulted in enhanced specific activities especially when using a hydrophilic support for immobilization such as Sepharose. In the case of a genetically modified hydantoinase carrying a His(6)-tag, affinity coupling led to a loss of activity of higher than 80%. Both enzymes were significantly stabilized by immobilization: In packed bed reactors, Eupergit C 250 L (NH(2))-immobilized hydantoinase and EAH-Sepharose-immobilized L-N-carbamoylase showed half-life times of approx. 14000 and 900 hours, respectively. Together with specific activities of the immobilized enzymes of 2.5 U/g wet carrier (hydantoinase) and 10 U/g wet carrier (L-N-carbamoylase) the newly developed biocatalysts are sufficient to fulfill industrial requirements.In comparison to the free enzymes, temperature and pH-optima were increased by 10 degrees C and one pH unit, respectively, after immobilization. The pH and temperature optima of the hydantoinase (L-N-carbamoylase) were determined to be pH 8.5-10 (pH 9.5) and 45-60 degrees C (60 degrees C).In order to provide sufficient amounts of biocatalyst for the process development in mini plant scale, a 50 fold scale-up of the optimized immobilization procedure was carried out for both enzymes. Because of the overlapping optima, both immobilized enzymes can be operated together in one reactor.