Highly efficient and selective membrane transport of silver(I) using hexathia-18-crown-6 as a specific ion carrier

Paper-based cation-selective optode sensor containing benzothiazole calix[4]arene for dual colorimetric Ag+ and Hg2+ detection

A new paper-based analytical device based on bulk ion-selective optodes (ISOs) for dual Ag⁺ and Hg²⁺ detection has been developed. A plasticized PVC hydrophobic phase composed of 25,27-di(benzothiazolyl)-26,28-hydroxycalix[4]arene (CU1) as an ion-selective ionophore, potassium tetrakis(4-chlorophenyl)borate as an ion-exchanger and chromoionophore XIV as a lipophilic pH indicator was entrapped in the pores of cellulose paper. This paper strip showed higher selectivity for Ag⁺ and Hg²⁺ over common alkali, alkaline earth and some transition metal ions with a color change from blue to yellow. With the proposed sensor, Ag⁺ and Hg²⁺ can be measured with the range of 1.92 × 10^-6 to 5.00 × 10^-3 M for Ag⁺ and 5.74 × 10^-7 to 5.00 × 10^-5 M for Hg²⁺ with a limit of detection of 1.92 × 10^-6 M for Ag⁺ and 5.74 × 10^-7 M for Hg²⁺. The proposed sensor was successfully applied to determine the amount of mercury in various water sources and the amount of silver in cleaning product samples containing silver nanoparticles (AgNPs). The results were in good agreement with inductively couple plasma-optical emission spectrometric measurements (ICP-OES).

Carrier-mediated extraction: Applications in extraction and microextraction methods

The present review is mainly focused on the overview of carrier mediated extraction (principles and applications) being reported over the last two decades and discusses the extraction process through carriers in various extraction methods such as Bulk liquid membranes, supported liquid membranes, emulsion liquid membranes and polymer inclusion membranes. Several types of carriers such as neutral, anionic, cationic, macrocyclic and supramulecular carriers are discussed. Also their application for metal, anions, drugs and environmental compounds are investigated. Carriers have been demonstrated to be useful for the selective extraction and recovery of numerous cations and anions enhancing the extraction properties of traditional solvent extraction and ion-exchange processes. Several types of carriers have different transport mechanisms. In these mechanisms, transport configurations are addressed and emphasized and the detailed information on the type of carrier are presented along with their specific separation modes. The performance of different carriers in terms of selectivity as well as efficiency are also discussed. Finally, the application of different carriers for the extraction of various compounds are compared and reviewed. To our best knowledge no reviews have been published on carrier-mediated extraction methods.

Interaction of mixed-donor macrocycles containing the 1,10-phenanthroline subunit with selected transition and post-transition metal ions: metal ion recognition in competitive liquid-liquid solvent extraction of Cu(II), Zn(II), Pb(II), Cd(II), Ag(I), and Hg(II)

Two new mixed aza-thia crowns 5-aza-2,8-dithia[9]-(2,9)-1,10-phenanthrolinophane (L(4)) and 2,8-diaza-5-thia[9]-(2,9)-1,10-phenanthrolinophane (L(7)) have been synthesized and characterized. The coordination behavior of L(4) and L(7) toward the metal ions Cu(II), Zn(II), Pb(II), Cd(II), Hg(II), and Ag(I) was studied in aqueous solution by potentiometric methods, in CD3CN/D2O 4:1 (v/v) by (1)H NMR titrations and in the solid state. The data obtained were compared with those available for the coordination behavior toward the same metal ions of structurally analogous mixed donor macrocyclic ligands L(1)-L(3), L(5), L(6): all these contain a phenanthroline subunit but have only S/O/N(aromatic) donor groups in the remaining portion of the ring and are, therefore, less water-soluble than L(4) and L(7). The complexes [Cd(NO3)2(L(5))], [Pb(L(7))](ClO4)2 x 1/2MeCN, [Pb(L(4))](ClO4)2 x MeCN, and [Cu(L(7))](ClO4)2 x 3/2MeNO2 were characterized by X-ray crystallography. The efficacy of L(1)-L(7) in competitive liquid-liquid metal ion extraction of Cu(II), Zn(II), Cd(II), Pb(II), Ag(I), and Hg(II) was assessed. In the absence of Hg(II), a clear extraction selectivity for Ag(I) was observed in all systems investigated.

Highly selective and efficient membrane transport of silver as AgBr2- ion using K+-decyl-18-crown-6 as carrier

Potassium-decyl-18-crown-6 was used as a highly selective and efficient carrier for uphill transport of silver as AgBr2-complex ion through a chloroform bulk liquid membrane. When thiosulfate anion was used as a metal ion acceptor in the receiving phase the amounts of silver transported across the liquid membrane after 120 and 180 min were 87.0 +/- 1.8% and 96.0 +/- 1.9%, respectively. The selectivity and efficiency of silver transport from aqueous solution containing Cu2+, Zn2+, Ni2+, Cd2+, Pb2+ and Fe3+ ions were investigated. In the presence of EDTA at pH = 4 as suitable masking agent in the source phase, the interfering effects of Pb2+ and Fe3+ ions were diminished drastically.

Co2+-selective membrane electrode based on the Schiff Base NADS

A new PVC membrane electrode for cobalt(II) ions based on a recently synthesized Schiff base of 5-((4-nitrophenyl)azo)- N-(2',4'-dimethoxyphenyl)salicylaldimine is reported. The electrode exhibits a Nernstian response for Co(2+) ions over a wide concentration range (9.0 x 10(-7)-1.0 x 10(-2) M) with a slope of 29(+/-1). The limit of detection is 8.0 x 10(-7) M. The proposed sensor revealed good selectivities over a wide variety of other cations including hard and soft metals. This electrode could be used in a pH range of 3.5-6.0. It was used as an indicator electrode in potentiometric titrations of cobalt(II) ions and can be used in the direct determination of Co(2+) in aqueous solutions.