Dynamics of the dissolution of an underpotentially deposited Cu layer on Au(111): a combined time-resolved surface-enhanced infrared and chronoamperometric study

Surface Sensitive Infrared Spectroelectrochemistry using Palladium Electrodeposited on ITO-Modified Internal Reflection Elements

Palladium nanoparticles have been electrodeposited on the surfaces of conductive indium tin oxide (ITO) modified silicon internal reflection elements. The resulting films are shown to be excellent platforms for attenuated...

Surface enhanced infrared spectroelectrochemistry using a microband electrode

The successful use of a microband electrode printed on a silicon internal reflection element to perform time resolved infrared spectroscopy is described. Decreasing the critical dimension of the microband electrode to several hundred micrometers provides a sub-microsecond time constant in a Kretschmann configured spectroelectrochemical cell. The high brilliance of synchrotron sourced infrared radiation has been combined with a specially designed horizontal attenuated total reflectance (ATR) microscope to focus the infrared beam on the microband electrode. The first use of a sub-microsecond time constant working electrode for ATR surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) is reported. Measurements show that the advantage afforded by the high brilliance of the synchrotron source is at least partially offset by increased noise from the experimental floor. The test system was the potential induced desorption of an adsorbed monolayer of 4-methoxypyridine (MOP) as measured using step-scan interferometry. Based on diffusion considerations alone, the expected time scale of the process was less than 10 microseconds but was experimentally measured to be three orders of magnitude slower. A defect-mediated dissolution of the condensed film is speculated to be the underlying cause of the unexpected slow kinetics.

Real-time observation of interfacial ions during electrocrystallization

Understanding the electrocrystallization mechanisms of metal cations is of importance for many industrial and scientific fields. We have determined the transitional structures during underpotential deposition (upd) of various metal cations on Au(111) electrode using time–resolved surface X–ray diffraction and step–scan IR spectroscopy. At the initial stage of upd, a characteristic intensity transient appears in the time–resolved crystal truncation rod depending on metal cations. Metal cations with relatively high coordination energies of hydration water are deposited in two steps: first, the hydrated metal cations approached the surface and are metastably located at the outer Helmholtz plane, then they are deposited via the destruction of the hydration shell. However, Tl⁺ and Ag⁺, which have low hydration energy, are rapidly adsorbed on Au(111) electrode without any metastable states of dehydration. Therefore, the deposition rate is strongly related to the coordination energy of the hydration water. Metal cations strongly interacting with the counter coadsorbed anions such as Cu²⁺ in sulfuric acid causes the deposition rate to be slower because of the formation of complexes.

Speciation of Adsorbed Phosphate at Gold Electrodes: A Combined Surface-Enhanced Infrared Absorption Spectroscopy and DFT Study

Despite the significance of phosphate buffer solutions in (bio)electrochemistry, detailed adsorption properties of phosphate anions at metal surfaces remain poorly understood. Herein, phosphate adsorption at quasi-Au(111) surfaces prepared by a chemical deposition technique has been systematically investigated over a wide range of pH by surface-enhanced infrared absorption spectroscopy in the ATR configuration (ATR-SEIRAS). Two different pH-dependent states of adsorbed phosphate are spectroscopically detected. Together with DFT calculations, the present study reveals that pKa for adsorbed phosphate species at the interface is much lower than that for phosphate species in the bulk solution; the dominant phosphate anion, H2PO4(-) at 2 < pH < 7 or HPO4(2-) at 7 < pH < 12, undergoes deprotonation upon adsorption and transforms into the adsorbed HPO4 or PO4, respectively. This study leads to a conclusion different than earlier spectroscopic studies have reached, highlighting the capability of the ATR-SEIRAS technique at electrified metal-solution interfaces.

Removal of acid red 88 by a magnetic graphene oxide/cationic hydrogel nanocomposite from aqueous solutions: adsorption behavior and mechanism

In this study, a kind of magnetic graphene oxide/cationic hydrogel nanocomposite (MGO–CH) was synthesized and characterized for acid red 88 (AR88) removal.

Infrared studies of the potential controlled adsorption of sodium dodecyl sulfate at the Au(111) electrode surface

Quantitative subtractively normalized interfacial Fourier transform infrared reflection spectroscopy (SNIFTIRS) was used to determine the conformation and orientation of sodium dodecyl sulfate (SDS) molecules adsorbed at the single crystal Au(111) surface. The SDS molecules form a hemimicellar/hemicylindrical (phase I) structure for the range of potentials between -200 ≤ E < 450 mV and condensed (phase II) film for electrode potentials ≥500 mV vs Ag/AgCl. The SNIFTIRS measurements indicate that the alkyl chains within the two adsorbed states of SDS film are in the liquid-crystalline state rather than the gel state. However, the sulfate headgroup is in an oriented state in phase I and is disordered in phase II. The newly acquired SNIFTIR spectroscopy measurements were coupled with previous electrochemical, atomic force microscopy, and neutron reflectivity data to improve the current existing models of the SDS film adsorbed on the Au(111) surface. The IR data support the existence of a hemicylindrical film for SDS molecules adsorbed at the Au(111) surface in phase I and suggest that the structure of the condensed film in phase II can be more accurately modeled by a disordered bilayer.

Interface for time-resolved electrochemical infrared microspectroscopy using synchrotron infrared radiation

A description of a coupled electrochemical and spectrometer interface using synchrotron infrared radiation is provided. The interface described allows for the precise and accurate timing needed for time-resolved IR spectroscopic studies of electrochemical systems. The overall interface uses a series of transistor-transistor logic trigger signals generated from the commercial FTIR spectrometer to regulate the recording of control, electrochemical, and IR signals with reproducible and adjustable timing. The instrument has been tested using a thin-layer electrochemical cell with synchrotron light focused through microscope optics. The time-resolved response of the benzoquinone/dihydroxybenzoquinone redox couple is illustrated as an example of the instrument's capability.

Extending in Situ Attenuated-Total-Reflection Surface-Enhanced Infrared Absorption Spectroscopy to Ni Electrodes

Surface-enhanced infrared absorption spectroscopy (SEIRAS) in the attenuated-total-reflection configuration (ATR-SEIRAS) has been applied for the first time to Ni electrodes. SEIRA-active Ni electrodes were obtained through initial chemical deposition of a 60-nm-thick Au underlayer on the reflecting plane of an ATR Si prism followed by potentiostatic electrodeposition of a 40-nm-thick Ni overlayer in a modified Watt's electrolyte. The Ni nanoparticle film thus obtained exhibited exceptionally enhanced IR absorption for the surface probe molecule CO while maintaining unipolar and normally directed bands. With the advantages of ATR-SEIRAS, free H2O molecules coadsorbed with CO at the Ni electrode were revealed, and their role in the electrooxidation of the CO adlayer at the Ni electrode is discussed. In addition, the conversion of bridge to linearly bonded CO at Ni electrode in a neutral solution was clearly identified upon electrooxidation of the CO adlayer. ATR-SEIRAS was also used to characterize the adsorption configuration of a pyridine adlayer at the Ni electrode. Both A1 and B1 modes of adsorbed pyridine were detected with comparably large intensities, essentially maintaining the spectral feature of pyridine molecules rather than that of "alpha-pyridyl species", which strongly suggests an "edge-tilted pyridine" configuration present at the Ni electrode, a configuration intermediate between the "end-on pyridine" and "edge-on alpha-pyridyl" adsorption modes reported in the literature.

Electrochemically induced surface-enhanced infrared difference absorption (SEIDA) spectroscopy of a protein monolayer

Functional infrared difference spectra of a protein monolayer are recorded by exploiting the surface enhancement exerted by a modified gold surface. The noble metal is used as the working electrode to induce redox-linked structural changes in the single layer of cytochrome c. The observed differences in the relative band intensities as compared to the difference spectrum of cytochrome c in solution are attributed to orientational effects of the adsorbed protein.