Skull Biomechanics and Suction Feeding in Fishes

Freshwater Habitats Promote Rapid Rates of Phenotypic Evolution in Sculpin Fishes (Perciformes: Cottoidea)

AbstractInvasions of freshwater habitats by marine fishes provide exceptional cases of habitat-driven biological diversification. Freshwater habitats make up less than 1% of aquatic habitats but contain ∼50% of fish species. However, while the dominant group of freshwater fishes (Otophysi) is older than that of most marine fishes (Percomorphaceae), it is less morphologically diverse. Classically, scientists have invoked differences in the tempo and/or mode of evolution to explain such cases of unequal morphological diversification. We tested for evidence of these phenomena in the superfamily Cottoidea (sculpins), which contains substantial radiations of marine and freshwater fishes. We find that the morphology of freshwater sculpins evolves faster but under higher constraint than that of marine sculpins, causing widespread convergence in freshwater sculpins and more morphological disparity in marine sculpins. The endemic freshwater sculpins of Lake Baikal, Siberia, are exceptions that demonstrate elevated novelty akin to that of marine sculpins. Several tantalizing factors may explain these findings, such as differences in habitat stability and/or habitat connectivity between marine and freshwater systems.

How Japanese eels escape from the stomach of a predatory fish

Predation shapes diversity in the defensive tactics of prey. One specialized defensive tactic is to escape the digestive system of the predator after capture1,2,3,4,5,6,7,8. While most of these defensive tactics involve passive ejection alive from predators' mouths and vents1,2,3,4,5, active escape from the digestive tracts of predators has recently been observed in certain invertebrate species6,7 and fish8. However, no study has yet uncovered the behavioral patterns and escape routes of the prey within a predator's digestive tract. Here, we report the sequential escape processes of the Japanese eel Anguilla japonica from capture to escape via the gills of predatory fish Odontobutis obscura using an X-ray video system. All captured eels had at least one portion of their bodies swallowed into the stomach of the predator. Surprisingly, after being swallowed, most individuals attempted to escape by going back up the digestive tract towards the esophagus and gill, and some of them succeeded in escaping via the predator's gill. Some eels, whose entire bodies were completely inside the stomach, exhibited circling behavior along the stomach, seemingly searching for possible escape routes. An electro-anesthetization experiment revealed that eels utilize various escape routes through gill clefts, rather than just one.

Functional modularity and mechanical stress shape plastic responses during fish development

The adaptive potential of plastic phenotypes relies on combined developmental responses. We investigated how manipulation of developmental conditions related to foraging mode in the fish Megaleporinus macrocephalus induces plastic responses at different levels: (a) functional modularity of skull bones, (b) biomechanical properties of the chondrocranium using finite element models, (c) bmp4 expression levels, used as a proxy for molecular pathways involved in bone responses to mechanical load. We identified new modules in experimental groups, suggesting increased integration in specific head bone elements associated with the development of subterminal and upturned mouths, which are major features of Megaleporinus plastic morphotypes released in the lab. Plastic responses in head shape involved differences in the magnitude of mechanical stress, which seem restricted to certain chondrocranium regions. Three bones represent a "mechanical unit" related to changes in mouth position induced by foraging mode, suggesting that functional modularity might be enhanced by the way specific regions respond to mechanical load. Differences in bmp4 expression levels between plastic morphotypes indicate associations between molecular signaling pathways and biomechanical responses to load. Our results offer a multilevel perspective of epigenetic factors involved in plastic responses, expanding our knowledge about mechanisms of developmental plasticity that originate novel complex phenotypes.

John M, Chau D, Clair C, Chan H, Holzman R, Martin CH. Multiple performance peaks for scale-biting in an adaptive radiation of pupfishes

The physical interactions between organisms and their environment ultimately shape their rate of speciation and adaptive radiation, but the contributions of biomechanics to evolutionary divergence are frequently overlooked. Here we investigated an adaptive radiation of Cyprinodon pupfishes to measure the relationship between feeding kinematics and performance during adaptation to a novel trophic niche, lepidophagy, in which a predator removes only the scales, mucus, and sometimes tissue from their prey using scraping and biting attacks. We used high-speed video to film scale-biting strikes on gelatin cubes by scale-eater, molluscivore, generalist, and hybrid pupfishes and subsequently measured the dimensions of each bite. We then trained the SLEAP machine-learning animal tracking model to measure kinematic landmarks and automatically scored over 100,000 frames from 227 recorded strikes. Scale-eaters exhibited increased peak gape and greater bite length; however, substantial within-individual kinematic variation resulted in poor discrimination of strikes by species or strike type. Nonetheless, a complex performance landscape with two distinct peaks best predicted gel-biting performance, corresponding to a significant nonlinear interaction between peak gape and peak jaw protrusion in which scale-eaters and their hybrids occupied a second performance peak requiring larger peak gape and greater jaw protrusion. A bite performance valley separating scale-eaters from other species may have contributed to their rapid evolution and is consistent with multiple estimates of a multi-peak fitness landscape in the wild. We thus present an efficient deep-learning automated pipeline for kinematic analyses of feeding strikes and a new biomechanical model for understanding the performance and rapid evolution of a rare trophic niche.

Evolutionary Patterns of Modularity in the Linkage Systems of the Skull in Wrasses and Parrotfish

The concept of modularity is fundamental to understanding the evolvability of morphological structures and is considered a central framework for the exploration of functionally and developmentally related subsets of anatomical traits. In this study, we explored evolutionary patterns of modularity and integration in the 4-bar linkage biomechanical system of the skull in the fish family Labridae (wrasses and parrotfish). We measured evolutionary modularity and rates of shape diversification of the skull partitions of three biomechanical 4-bar linkage systems using 205 species of wrasses (family: Labridae) and a three-dimensional geometric morphometrics data set of 200 coordinates. We found support for a two-module hypothesis on the family level that identifies the bones associated with the three linkages as being a module independent from a module formed by the remainder of the skull (neurocranium, nasals, premaxilla, and pharyngeal jaws). We tested the patterns of skull modularity for four tribes in wrasses: hypsigenyines, julidines, cheilines, and scarines. The hypsigenyine and julidine groups showed the same two-module hypothesis for Labridae, whereas cheilines supported a four-module hypothesis with the three linkages as independent modules relative to the remainder of the skull. Scarines showed increased modularization of skull elements, where each bone is its own module. Diversification rates of modules show that linkage modules have evolved at a faster net rate of shape change than the remainder of the skull, with cheilines and scarines exhibiting the highest rate of evolutionary shape change. We developed a metric of linkage planarity and found the oral jaw linkage system to exhibit high planarity, while the rest position of the hyoid linkage system exhibited increased three dimensionality. This study shows a strong link between phenotypic evolution and biomechanical systems, with modularity influencing rates of shape change in the evolution of the wrasse skull.

Comparative analysis of cranial morphology in Middle-American heroine cichlids (Actinopterygii: Cichliformes)

Heroine cichlids are characterized by high morphological diversity, mainly in structures related to the capture and processing of food. The existence of ecomorphological groups has been proposed based on feeding behavior, where it is common for some phylogenetically unrelated species to show evolutionary convergence. Using geometric morphometrics and comparative phylogenetic methods, the variation in cranial morphology was evaluated for 17 species of heroine cichlids representing 5 ecomorphs. Cranial ecomorphs were recovered and significant differences were determined. Morphological variation of the ecomorphs was mainly explained by two axes: (1) the position of the mouth determined by the shape of the bones of the oral jaw and (2) the height of the head, defined by the size and position of the supraoccipital crest and the distance to the interopercle-subopercle junction. Cranial variation among species was related to phylogeny. To better understand the evolution of cranial morphology, it is necessary to evaluate the morphofunctional relationship of other anatomical structures related to feeding, as well as to increase the number of study species in each ecomorph by including other lineages.

Whole-body variational modularity in the zebrafish: an inside-out story of a model species

Actinopterygians are the most diversified clade of extant vertebrates. Their impressive morphological disparity bears witness to tremendous ecological diversity. Modularity, the organization of biological systems into quasi-independent anatomical/morphological units, is thought to increase evolvability of organisms and facilitate morphological diversification. Our study aims to quantify patterns of variational modularity in a model actinopterygian, the zebrafish (Danio rerio), using three-dimensional geometric morphometrics on osteological structures isolated from micro-CT scans. A total of 72 landmarks were digitized along cranial and postcranial ossified regions of 30 adult zebrafishes. Two methods were used to test modularity hypotheses, the covariance ratio and the distance matrix approach. We find strong support for two modules, one comprised paired fins and the other comprised median fins, that are best explained by functional properties of subcarangiform swimming. While the skull is tightly integrated with the rest of the body, its intrinsic integration is relatively weak supporting previous findings that the fish skull is a modular structure. Our results provide additional support for the recognition of similar hypotheses of modularity identified based on external morphology in various teleosts, and at least two variational modules are proposed. Thus, our results hint at the possibility that internal and external modularity patterns may be congruent.

Burrowing constrains patterns of skull shape evolution in wrasses

The evolution of behavioral and ecological specialization can have marked effects on the tempo and mode of phenotypic evolution. Head-first burrowing has been shown to exert powerful selective pressures on the head and body shapes of many vertebrate and invertebrate taxa. In wrasses, burrowing behaviors have evolved multiple times independently, and are commonly used in foraging and predator avoidance behaviors. While recent studies have examined the kinematics and body shape morphology associated with this behavior, no study to-date has examined the macroevolutionary implications of burrowing on patterns of phenotypic diversification in this clade. Here, we use three-dimensional geometric morphometrics and phylogenetic comparative methods to study the evolution of skull shape in fossorial wrasses and their relatives. We test for skull shape differences between burrowing and non burrowing wrasses and evaluate hypotheses of shape convergence among the burrowing wrasses. We also quantify rates of skull shape evolution between burrowing and non burrowing wrasses to test for whether burrowing constrains or accelerates rates of skull shape evolution in this clade. We find that while burrowing and non burrowing wrasses exhibit similar degrees of morphological disparity, for burrowing wrasses, it took nearly twice as long to amass this disparity. Furthermore, while the disparities between groups are evenly matched, we find that most burrowing species are confined to a particular region of shape space with most species exhibiting narrower heads than many non-burrowing species. These results suggest head-first burrowing constrains patterns of skull shape diversification in wrasses by potentially restricting the range of phenotypes that can perform this behavior.

Decoupled evolution of the cranium and mandible in carnivoran mammals

The relationship between skull morphology and diet is a prime example of adaptive evolution. In mammals, the skull consists of the cranium and the mandible. Although the mandible is expected to evolve more directly in response to dietary changes, dietary regimes may have less influence on the cranium because additional sensory and brain-protection functions may impose constraints on its morphological evolution. Here, we tested this hypothesis by comparing the evolutionary patterns of cranium and mandible shape and size across 100+ species of carnivoran mammals with distinct feeding ecologies. Our results show decoupled modes of evolution in cranial and mandibular shape; cranial shape follows clade-based evolutionary shifts, whereas mandibular shape evolution is linked to broad dietary regimes. These results are consistent with previous hypotheses regarding hierarchical morphological evolution in carnivorans and greater evolutionary lability of the mandible with respect to diet. Furthermore, in hypercarnivores, the evolution of both cranial and mandibular size is associated with relative prey size. This demonstrates that dietary diversity can be loosely structured by craniomandibular size within some guilds. Our results suggest that mammal skull morphological evolution is shaped by mechanisms beyond dietary adaptation alone.

Suction feeding of West African lungfish (Protopterus annectens): An XROMM analysis of jaw mechanics, cranial kinesis, and hyoid mobility

Suction feeding in fishes is characterized by rapid cranial movements, but extant lungfishes (Sarcopterygii: Dipnoi) exhibit a reduced number and mobility of cranial bones relative to actinopterygian fishes. Despite fusion of cranial elements, lungfishes are proficient at suction feeding, though the impacts of novel cranial morphology and reduced cranial kinesis on feeding remain poorly understood. We used X-ray Reconstruction of Moving Morphology (XROMM) to study the kinematics of seven mobile skeletal elements (neurocranium, upper jaw, lower jaw, tongue, ceratohyal, clavicle, and cranial rib) and two muscles (costoclavicular portion of the hypaxialis and rectus cervicis) during the feeding strikes of West African lungfish (Protopterus annectens). We found that feeding by P. annectens on non-evasive prey is relatively slow, with a mean time to peak gape of 273 ms. Lower jaw depression and clavicular rotation were hinge-like, with one degree of freedom, but the ceratohyals rotated in a complex motion involving depression and long-axis rotation. We quantified the relative contributions to oral cavity volume change (RCVC) and found that oral cavity expansion is created primarily by ceratohyal and clavicle motion. P. annectens suction feeds relatively slowly but successfully through muscle shortening of hypaxial and rectus cervicis muscles contributing to hyoid mobility.

Morphometric and Genetic Description of Trophic Adaptations in Cichlid Fishes

Since Darwin, biologists have sought to understand the evolution and origins of phenotypic adaptations. The skull is particularly diverse due to intense natural selection on feeding biomechanics. We investigated the genetic and molecular origins of trophic adaptation using Lake Malawi cichlids, which have undergone an exemplary evolutionary radiation. We analyzed morphological differences in the lateral and ventral head shape among an insectivore that eats by suction feeding, an obligate biting herbivore, and their F2 hybrids. We identified variation in a series of morphological traits—including mandible width, mandible length, and buccal length—that directly affect feeding kinematics and function. Using quantitative trait loci (QTL) mapping, we found that many genes of small effects influence these craniofacial adaptations. Intervals for some traits were enriched in genes related to potassium transport and sensory systems, the latter suggesting co-evolution of feeding structures and sensory adaptations for foraging. Despite these indications of co-evolution of structures, morphological traits did not show covariation. Furthermore, phenotypes largely mapped to distinct genetic intervals, suggesting that a common genetic basis does not generate coordinated changes in shape. Together, these suggest that craniofacial traits are mostly inherited as separate modules, which confers a high potential for the evolution of morphological diversity. Though these traits are not restricted by genetic pleiotropy, functional demands of feeding and sensory structures likely introduce constraints on variation. In all, we provide insights into the quantitative genetic basis of trophic adaptation, identify mechanisms that influence the direction of morphological evolution, and provide molecular inroads to craniofacial variation.

Rapid Parallel Morphological and Mechanical Diversification of South American Pike Cichlids (Crenicichla)

Explosive bouts of diversification are one of the most conspicuous features of the tree of life. When such bursts are repeated in similar environments it suggests some degree of predictability in the evolutionary process. We assess parallel adaptive radiation of South American pike cichlids (Crenicichla) using phylogenomics and phylogenetic comparative methods. We find that species flocks in the Uruguay and Iguazú River basins rapidly diversified into the same set of ecomorphs that reflect feeding ecology. Both adaptive radiations involve expansion of functional morphology, resulting in unique jaw phenotypes. Yet, form and function were decoupled such that most ecomorphs share similar mechanical properties of the jaws (i.e., jaw motion during a feeding strike). Prey mobility explained six to nine-fold differences in the rate of morphological evolution, but had no effect on the rate of mechanical evolution. We find no evidence of gene flow between species flocks or with surrounding coastal lineages that may explain their rapid diversification. When compared to cichlids of the East African Great Lakes and other prominent adaptive radiations, pike cichlids share many themes, including rapid expansion of phenotypic diversity, specialization along the benthic-to-pelagic habitat and soft-to-hard prey axes, and the evolution of conspicuous functional innovations. Yet, decoupled evolution of form and function and the absence of hybridization as a catalyzing force are departures from patterns observed in other adaptive radiations. Many-to-one mapping of morphology to mechanical properties is a mechanism by which pike cichlids exhibit a diversity of feeding ecologies while avoiding exacerbating underlying mechanical trade-offs.

Geographic variation in the skulls of the horseshoe bats, Rhinolophus simulator and R. cf. simulator: Determining the relative contributions of adaptation and drift using geometric morphometrics

The relative contributions of adaptation and genetic drift to morphological diversification of the skulls of echolocating mammals were investigated using two horseshoe bat species, Rhinolophus simulator and R. cf. simulator, as test cases. We used 3D geometric morphometrics to compare the shapes of skulls of the two lineages collected at various localities in southern Africa. Size and shape variation was predominantly attributed to selective forces; the between-population variance (B) was not proportional to the within-population variance (W). Modularity was evident in the crania of R. simulator but absent in the crania of R. cf. simulator and the mandibles of both species. The skulls of the two lineages thus appeared to be under different selection pressures, despite the overlap in their distributions. Difference in the crania of R. cf. simulator was centered largely on the nasal dome region of R. cf. simulator but on the cranium and mandibles of R. simulator. It is likely that the size and shape of the nasal dome, which acts as a frequency-dependent acoustic horn, is more crucial in R. cf. simulator than in R. simulator because of the higher echolocation frequencies used by R. cf. simulator. A larger nasal dome in R. cf. simulator would allow the emission of higher intensity pulses, resulting in comparable detection distances to that of R. simulator. In contrast, selection pressure is probably more pronounced on the mandibles and cranium of R. simulator to compensate for the loss in bite force because of its elongated rostrum. The predominance of selection probably reflects the stringent association between environment and the optimal functioning of phenotypic characters associated with echolocation and feeding in bats.

Rostral neurovasculature indicates sensory trade-offs in Mesozoic pelagic crocodylomorphs

Metriorhynchoid thalattosuchians were a marine clade of Mesozoic crocodylomorphs that evolved from semi-aquatic, "gharial"-like species into the obligately pelagic subclade Metriorhynchidae. To explore whether the sensory and physiological demands of underwater life necessitates a shift in rostral anatomy, both in neurology and vasculature, we investigate the trigeminal innervation and potential somatosensory abilities of metriorhynchoids by digitally segmenting the rostral neurovascular canals in CT scans of 10 extant and extinct crocodyliforms. The dataset includes the terrestrial, basal crocodyliform Protosuchus haughtoni, two semi-aquatic basal metriorhynchoids, four pelagic metriorhynchids and three extant, semi-aquatic crocodylians. In the crocodylian and basal metriorhynchoid taxa, we find three main neurovascular channels running parallel to one another posteroanteriorly down the length of the snout, whereas in metriorhynchids there are two, and in P. haughtoni only one. Crocodylians appear to be unique in their extensive trigeminal innervation, which is used to supply the integumentary sensory organs (ISOs) involved with their facial somatosensory abilities. Crocodylians have a far higher number of foramina on the maxillary bones than either metriorhynchoids or P. haughtoni, suggesting that the fossil taxa lacked the somatosensory abilities seen in extant species. We posit that the lack of ISO osteological correlates in metriorhynchoids is due to their basal position in Crocodyliformes, rather than a pelagic adaptation. This is reinforced by the hypothesis that extant crocodyliforms, and possibly some neosuchian clades, underwent a long "nocturnal bottleneck"-hinting that their complex network of ISOs evolved in Neosuchia, as a sensory trade-off to compensate for poorer eyesight.

Bifunctional Role of the Sternohyoideus Muscle During Suction Feeding in Striped Surfperch, Embiotoca lateralis

In ray-finned fishes, the sternohyoideus (SH) is among the largest muscles in the head region and, based on its size, can potentially contribute to the overall power required for suction feeding. However, the function of the SH varies interspecifically. In largemouth bass (Micropterus salmoides) and several clariid catfishes, the SH functions similarly to a stiff ligament. In these species, the SH remains isometric and transmitts power from the hypaxial musculature to the hyoid apparatus during suction feeding. Alternatively, the SH can shorten and contribute muscle power during suction feeding, a condition observed in the bluegill sunfish (Lepomis macrochirus) and one clariid catfish. An emerging hypothesis centers on SH muscle size as a predictor of function: in fishes with a large SH, the SH shortens during suction feeding, whereas in fish with a smaller SH, the muscle may remain isometric. Here, we studied striped surfperch (Embiotoca lateralis), a species in which the SH is relatively large at 8.8% of axial muscle mass compared with 4.0% for L. macrochirus and 1.7% for M. salmoides, to determine whether the SH shortens during suction feeding and is, therefore, bifunctional—both transmitting and generating power—or remains isometric and only transmits power. We measured skeletal kinematics of the neurocranium, urohyal, and cleithrum with Video Reconstruction of Moving Morphology, along with muscle strain and shortening velocity in the SH and epaxial muscles, using a new method of 3D external marker tracking. We found mean SH shortening during suction feeding strikes (n = 22 strikes from four individual E. lateralis) was 7.2 ± 0.55% (±SEM) of initial muscle length. Mean peak speed of shortening was 4.9 ± 0.65 lengths s⁻¹, and maximum shortening speed occurred right around peak gape when peak power is generated in suction feeding. The cleithrum of E. lateralis retracts and depresses but the urohyal retracts and depresses even more, a strong indicator of a bifunctional SH capable of not only generating its own power but also transmitting hypaxial power to the hyoid. While power production in E. lateralis is still likely dominated by the axial musculature, since even the relatively large SH of E. lateralis is only 8.8% of axial muscle mass, the SH may contribute a meaningful amount of power given its continual shortening just prior to peak gape across all strikes. These results support the finding from other groups of fishes that a large SH muscle, relative to axial muscle mass, is likely to both generate and transmit power during suction feeding.

nkx3.2 mutant zebrafish accommodate jaw joint loss through a phenocopy of the head shapes of Paleozoic jawless fish

The vertebrate jaw is a versatile feeding apparatus. To function, it requires a joint between the upper and lower jaws, so jaw joint defects are often highly disruptive and difficult to study. To describe the consequences of jaw joint dysfunction, we engineered two independent null alleles of a single jaw joint marker gene, nkx3.2, in zebrafish. These mutations caused zebrafish to become functionally jawless via fusion of the upper and lower jaw cartilages (ankylosis). Despite lacking jaw joints, nkx3.2 mutants survived to adulthood and accommodated this defect by: (a) having a remodeled skull with a fixed open gape, reduced snout and enlarged branchial region; and (b) performing ram feeding in the absence of jaw-generated suction. The late onset and broad extent of phenotypic changes in the mutants suggest that modifications to the skull are induced by functional agnathia, secondarily to nkx3.2 loss of function. Interestingly, nkx3.2 mutants superficially resemble ancient jawless vertebrates (anaspids and furcacaudiid thelodonts) in overall head shape. Because no homology exists in individual skull elements between these taxa, the adult nkx3.2 phenotype is not a reversal but rather a convergence due to similar functional requirements of feeding without moveable jaws. This remarkable analogy strongly suggests that jaw movements themselves dramatically influence the development of jawed vertebrate skulls. Thus, these mutants provide a unique model with which to: (a) investigate adaptive responses to perturbation in skeletal development; (b) re-evaluate evolutionarily inspired interpretations of phenocopies generated by gene knockdowns and knockouts; and (c) gain insight into feeding mechanics of the extinct agnathans.

Decoupled jaws promote trophic diversity in cichlid fishes

Functional decoupling of oral and pharyngeal jaws is widely considered to have expanded the ecological repertoire of cichlid fishes. But, the degree to which the evolution of these jaw systems is decoupled and whether decoupling has impacted trophic diversification remains unknown. Focusing on the large Neotropical radiation of cichlids, we ask whether oral and pharyngeal jaw evolution is correlated and how their evolutionary rates respond to feeding ecology. In support of decoupling, we find relaxed evolutionary integration between the two jaw systems, resulting in novel trait combinations that potentially facilitate feeding mode diversification. These outcomes are made possible by escaping the mechanical trade-off between force transmission and mobility, which characterizes a single jaw system that functions in isolation. In spite of the structural independence of the two jaw systems, results using a Bayesian, state-dependent, relaxed-clock model of multivariate Brownian motion indicate strongly aligned evolutionary responses to feeding ecology. So, although decoupling of prey capture and processing functions released constraints on jaw evolution and promoted trophic diversity in cichlids, the natural diversity of consumed prey has also induced a moderate degree of evolutionary integration between the jaw systems, reminiscent of the original mechanical trade-off between force and mobility.

Suction Flows Generated by the Carnivorous Bladderwort Utricularia—Comparing Experiments with Mechanical and Mathematical Models

Suction feeding is a well-understood feeding mode among macroscopic aquatic organisms. The little we know about small suction feeders from larval fish suggests that small suction feeders are not effective. Yet bladderworts, an aquatic carnivorous plant with microscopic underwater traps, have strong suction performances despite having the same mouth size as that of fish larvae. Previous experimental studies of bladderwort suction feeding have focused on the solid mechanics of the trap door’s opening mechanism rather than the mechanics of fluid flow. As flows are difficult to study in small suction feeders due to their small size and brief event durations, we combine flow visualization on bladderwort traps with measurements on a mechanical, dynamically scaled model of a suction feeder. We find that bladderwort traps generate flows that are more similar to the inertia-dominated flows of adult fish than the viscosity-dominated flows of larval fish. Our data further suggest that axial flow transects through suction flow fields, often used in biological studies to characterize suction flows, are less diagnostic of the relative contribution of inertia versus viscosity than transverse transects.

Evolution of a soft-tissue foraging adaptation in African cichlids: Roles for novelty, convergence, and constraint

Understanding the origins of biodiversity demands consideration of both extrinsic (e.g., ecological opportunity) and intrinsic (e.g., developmental constraint) factors. Here, we use a combination of phylogenetic and genetic tools to address the origin of novelty in African cichlids. In particular, we focus on an extreme hypertrophied snout that is structurally integrated with the upper jaw. We show that this bizarre trait has evolved independently in at least two distinct and ecologically successful cichlid clades. We find that snout dimensions are decoupled both phenotypically and genetically, which has enabled it to evolve independently in multiple directions. Further, patterns of variation among species and within a genetic mapping pedigree suggest that relative to snout length, depth is under greater genetic and/or developmental constraint. Models of evolution suggest that snout shape is under selection for feeding behavior, with snout depth being important for algae scraping and snout length for sand sifting. Indeed, the deep snout of some algivores is achieved via an expansion of the intermaxillary ligament, which is important for jaw stability and may increase feeding performance. Overall, our data imply that the evolution of exaggerated snout depth required overcoming a genetic/developmental constraint, which led to expanded ecological opportunity via foraging adaptation.

The role of an overlooked adductor muscle in the feeding mechanism of ray-finned fishes: Predictions from simulations of a deep-sea viperfish

In a majority of ray-finned fishes (Actinopterygii), effective acquisition of food resources is predicated on rapid jaw adduction. Although the musculoskeletal architecture of the feeding system has been the subject of comparative research for many decades, individual contributions of the major adductor divisions to closing dynamics have not been elucidated. While it is understood that the dorsal divisions that arise from the head and insert on the posterior of the lower jaw are major contributors to closing dynamics, the contribution of the ventral components of the adductor system has been largely overlooked. In many ray-finned fishes, the ventral component is comprised of a single division, the A_ω, that originates on an intersegmental aponeurosis of the facialis divisions and inserts on the medial face of the dentary, anterior to the Meckelian tendon. This configuration resembles a sling applied at two offset points of attachment on a third-order lever. The goal of this study was to elucidate the contributions of the A_ω to jaw adduction by modeling jaw closing in the deep-sea viperfish Chauliodus sloani. To do this, we simulated adduction with a revised computational model that incorporates the geometry of the A_ω. By comparing results between simulations that included and excluded A_ω input, we show that the A_ω adds substantially to lower-jaw adduction dynamics in C. sloani by acting as a steering motor and displacing the line of action of the dorsal facialis adductor muscles and increasing the mechanical advantage and input moment arms of the jaw lever system. We also explored the effect of the A_ω on muscle dynamics and found that overall facialis muscle shortening velocities are higher and normalized force production is lower in simulations including the A_ω. The net effect of these changes in muscle dynamics results in similar magnitudes of peak power in the facialis divisions between simulations, however, peak power is achieved earlier in adduction Modifications of muscle mechanics and posture result in significant increases in closing performance, including static bite force, angular velocity, and adduction time. We compare this configuration to a similar design in crocodilians and suggest that the A_ω configuration and similar sling configurations across the vertebrate tree of life indicate the importance of this musculoskeletal design in feeding.

Ecomorphology of Neotropical Electric Fishes: An Integrative Approach to Testing the Relationships between Form, Function, and Trophic Ecology

The relationship between form and function is thought to play an integral role in structuring broad-scale patterns of morphological evolution and resource utilization. In ecomorphological studies, mechanical performance is widely understood to constrain the evolution of form and function. However, the relationship between form, function, and resource utilization is less clear. Additionally, seasonal fluctuations in resource availability may further complicate patterns of resource use. How organisms cope with these complexities, and the effect of these factors on broadscale patterns of morphological evolution is also poorly understood. Here we use three-dimensional geometric morphometrics, biomechanics, stable isotope analysis, and gut-content analysis to study trophic evolution in a clade of riverine-adapted electric fishes from a region with high seasonal variability; the Amazon River. We find significant and phylogenetically structured relationships among measures of trophic ecology and skull shape. We also recover a significant relationship between the mechanical advantage of the mandible and trophic position, where species feeding at higher trophic levels have narrower jaws with lower mechanical advantages, and species feeding at lower trophic levels have deeper jaws with higher mechanical advantages. Our results indicate that selection is driving the evolution of mandible shape and performance toward specialization on different trophic ecologies.

Bony Patchwork: Mosaic Patterns of Evolution in the Skull of Electric Fishes (Apteronotidae: Gymnotiformes)

Mosaic evolution refers to the pattern whereby different organismal traits exhibit differential rates of evolution typically due to reduced levels of trait covariation through deep time (i.e., modularity). These differences in rates can be attributed to variation in responses to selective pressures between individual traits. Differential responses to selective pressures also have the potential to facilitate functional specialization, allowing certain traits to track environmental stimuli more closely than others. The teleost skull is a multifunctional structure comprising a complex network of bones and thus an excellent system for which to study mosaic evolution. Here we construct an ultrametric phylogeny for a clade of Neotropical electric fishes (Apteronotidae: Gymnotiformes) and use three-dimensional geometric morphometrics to investigate patterns of mosaic evolution in the skull and jaws. We find strong support for a developmental, three-module hypothesis that consists of the face, braincase, and mandible, and we find that the mandible has evolved four times faster than its neighboring modules. We hypothesize that the functional specialization of the mandible in this group of fishes has allowed it to outpace the face and braincase and evolve in a more decoupled manner. We also hypothesize that this pattern of mosaicism may be widespread across other clades of teleost fishes.

Prepared for the future: A strong signal of evolution toward the adult benthic niche during the pelagic stage in Labrid fishes

The morphology of organisms reflects a balance between their evolutionary history, functional demands, and biomechanical constraints imposed by the immediate environment. In many fish species, a marked shift in the selection regime is evident when pelagic larvae, which swim and feed in the open ocean, settle in their adult benthic habitat. This shift is particularly dramatic in coral-reef fishes, where the adult habitat is immensely complex. However, whether the adult trophic ecotype affects the morphology of early-life stages is unclear. We measured a suite of 26 functional-morphological traits in the head and body of larvae from an ontogenetic series of 16 labrid species. Using phylogenetic comparative methods, we reconstructed the location of adaptive peaks of larvae whose adults are associated with different trophic ecotypes. We found that the morphospace occupation in these larvae is largely driven by divergent adaptations to the adult benthic habitats. The disparity between adaptive peaks is achieved early and does not monotonically increase with size. Our findings thus refute the notion that larvae rapidly acquire the trophic-specific traits during a metamorphic period immediately prior to settlement. This early specialization might be due to the highly complex musculoskeletal system of the head that cannot be rapidly modified.

Conserved spatio-temporal patterns of suction-feeding flows across aquatic vertebrates: a comparative flow visualization study

Suction feeding is a widespread prey capture strategy among aquatic vertebrates. It is almost omnipresent across fishes, and has repeatedly evolved in other aquatic vertebrates. By rapidly expanding the mouth cavity, suction-feeders generate a fluid flow outside of their mouth, drawing prey inside. Fish and other suction feeding organisms display remarkable trophic diversity, echoed in the diversity of their skull and mouth morphologies. Yet, it is unclear how variable suction flows are across species, and whether variation in suction flows supports trophic diversity. Using a high-speed flow visualization technique, we characterized the spatio-temporal patterns in the flow fields produced during feeding in 14 species of aquatic suction feeders. We found that suction-feeding hydrodynamics are highly conserved across species. Suction flows affected only a limited volume of ∼1 gape diameter away from the mouth, and peaked around the timing of maximal mouth opening. The magnitude of flow speed increased with increasing mouth diameter and, to a lesser extent, with decreasing time to peak gape opening. Other morphological, kinematic and behavioral variables played a minor role in shaping suction-feeding dynamics. We conclude that the trophic diversity within fishes, and likely other aquatic vertebrates, is not supported by a diversity of mechanisms that modify the characteristics of suction flow. Rather, we suggest that suction feeding supports such trophic diversity due to the general lack of strong trade-offs with other mechanisms that contribute to prey capture.

A biorobotic model of the suction-feeding system in largemouth bass: the roles of motor program speed and hyoid kinematics

The vast majority of ray-finned fishes capture prey through suction feeding. The basis of this behavior is the generation of subambient pressure through rapid expansion of a highly kinetic skull. Over the last four decades, results from in vivo experiments have elucidated the general relationships between morphological parameters and subambient pressure generation. Until now, however, researchers have been unable to tease apart the discrete contributions of, and complex relationships among, the musculoskeletal elements that support buccal expansion. Fortunately, over the last decade, biorobotic models have gained a foothold in comparative research and show great promise in addressing long-standing questions in vertebrate biomechanics. In this paper, we present BassBot, a biorobotic model of the head of the largemouth bass (Micropterus salmoides). BassBot incorporates a 3D acrylic plastic armature of the neurocranium, maxillary apparatus, lower jaw, hyoid, suspensorium and opercular apparatus. Programming of linear motors permits precise reproduction of live kinematic behaviors including hyoid depression and rotation, premaxillary protrusion, and lateral expansion of the suspensoria. BassBot reproduced faithful kinematic and pressure dynamics relative to live bass. We show that motor program speed has a direct relationship to subambient pressure generation. Like vertebrate muscle, the linear motors that powered kinematics were able to produce larger magnitudes of force at slower velocities and, thus, were able to accelerate linkages more quickly and generate larger magnitudes of subambient pressure. In addition, we demonstrate that disrupting the kinematic behavior of the hyoid interferes with the anterior-to-posterior expansion gradient. This resulted in a significant reduction in subambient pressure generation and pressure impulse of 51% and 64%, respectively. These results reveal the promise biorobotic models have for isolating individual parameters and assessing their role in suction feeding.

Swimming muscles power suction feeding in largemouth bass

Most aquatic vertebrates use suction to capture food, relying on rapid expansion of the mouth cavity to accelerate water and food into the mouth. In ray-finned fishes, mouth expansion is both fast and forceful, and therefore requires considerable power. However, the cranial muscles of these fishes are relatively small and may not be able to produce enough power for suction expansion. The axial swimming muscles of these fishes also attach to the feeding apparatus and have the potential to generate mouth expansion. Because of their large size, these axial muscles could contribute substantial power to suction feeding. To determine whether suction feeding is powered primarily by axial muscles, we measured the power required for suction expansion in largemouth bass and compared it to the power capacities of the axial and cranial muscles. Using X-ray reconstruction of moving morphology (XROMM), we generated 3D animations of the mouth skeleton and created a dynamic digital endocast to measure the rate of mouth volume expansion. This time-resolved expansion rate was combined with intraoral pressure recordings to calculate the instantaneous power required for suction feeding. Peak expansion powers for all but the weakest strikes far exceeded the maximum power capacity of the cranial muscles. The axial muscles did not merely contribute but were the primary source of suction expansion power and generated up to 95% of peak expansion power. The recruitment of axial muscle power may have been crucial for the evolution of high-power suction feeding in ray-finned fishes.

Suction among pickers: jaw mechanics, dietary breadth and feeding behaviour in beach-spawning Leuresthes spp. compared with their relatives

Jaw mechanics and dietary breadth in California grunion Leuresthes tenuis and Gulf grunion Leuresthes sardina were compared with three other members of the tribe Atherinopsini to test whether these two species have evolved a novel jaw protrusion that might be associated with feeding narrowly on abundant prey near spawning beaches. Quantitative comparison of cleared-and-stained specimens of five members of the atherinopsine clade showed that, compared with false grunion Colpichthys regis, topsmelt Atherinops affinis and jacksmelt Atherinopsis californiensis, L. tenuis and L. sardina have longer, more downwardly directed premaxillary protrusion, expanded dentary and premaxillary bones, greater lower jaw rotation and larger premaxilla-vomer separation. Leuresthes tenuis showed greater differences than L. sardina in these features. Comparison of the gut contents of L. tenuis and A. affinis with zooplankton samples collected simultaneously with these fishes in the water column within 1 km of shore showed that, as predicted, L. tenuis fed predominantly on mysid crustaceans and had a narrower diet than A. affinis. High-speed video analysis showed that L. tenuis exhibits a mean time to maximum jaw protrusion c. 2.5 times shorter than that of A. affinis. The grunion sister species, especially L. tenuis, have evolved suction feeding that may allow efficient feeding on common, evasive prey near spawning sites. The morphological traits seen in both species of Leuresthes signify a marked difference from their closest relatives in prey capture and suggest a type of jaw protrusion not yet seen in cyprinodontiforms or perciforms.

Does feeding behavior facilitate trophic niche partitioning in two sympatric sucker species from the American Southwest?

We examined two sympatric desert fishes, Sonora suckers (Catostomus insignis) and desert suckers (Pantosteus clarkii), and asked, does feeding behavior facilitate trophic niche partitioning? To answer this question, we conducted laboratory-based feeding trials to determine whether morphology alone facilitates the diet separation between the relatively unspecialized, omnivorous Sonora sucker and the more morphologically specialized, algivorous desert sucker or whether behavioral differences accompany morphological specialization. We predicted that (1) algivorous desert suckers would maximize contact between jaws and substrate and produce a large mouth-gape to facilitate scraping attached food-material; (2) omnivorous Sonora suckers would be more effective suction feeders when consuming unattached food items from the benthos; and (3) because they are anatomically specialized for scraping, desert suckers could not alter their feeding behavior when presented with different prey types, whereas relatively unspecialized Sonora suckers could vary behavior with prey type. We found that both species maximized jaw contact when feeding on benthic-attached food, although desert suckers produced a greater gape area. We also found that Sonora suckers were more effective suction feeders when feeding on benthic-unattached prey. Counter to our initial predictions, both species altered key aspects of feeding behavior in response to different prey types/locations. It appears that both sucker species can function as generalist feeders to exploit a variety of prey types within their natural habitat; indeed, this behavioral versatility may allow desert and Sonora suckers to respond to the cyclic environmental changes that are characteristic of the aquatic habitats of the American Southwest.

Role of axial muscles in powering mouth expansion during suction feeding in Largemouth Bass

Suction-feeding fishes capture food by fast and forceful expansion of the mouth cavity, and axial muscles likely provide substantial power for this feeding behavior. Dorsal expansion of the mouth cavity can only be powered by the epaxial muscles, but both the sternohyoid, shortening against an immobile pectoral girdle to retract the hyoid, or the hypaxial muscles, shortening to retract both the pectoral girdle and hyoid, could contribute ventral expansion power. To determine 1) if hypaxial muscles generate power for ventral expansion, and 2) the rostrocaudal extent of axial muscle shortening during suction feeding, we measured skeletal kinematics and muscle shortening in largemouth bass (Micropterus salmoides). The 3D motions of the cleithrum and hyoid were measured with X-ray Reconstruction of Moving Morphology (XROMM), and muscle shortening was measured with fluoromicrometry, wherein changes in the distance between radio-opaque intramuscular markers are measured with biplanar x-ray video. We found that the hypaxials generated power for ventral suction expansion, shortening (mean of 6.2 mm) to rotate the pectoral girdle caudoventrally (mean of 9.3°) and retract the hyoid (mean of 8.5 mm). In contrast, the sternohyoid shortened minimally (mean of 0.48 mm), functioning like a ligament to transmit hypaxial shortening to the hyoid. Hypaxial and epaxial shortening were not confined to the rostral muscle regions, but extended more than halfway down the body during suction expansion. We conclude that hypaxial and epaxial muscles are both crucial for powering mouth expansion in largemouth bass, supporting the integration of axial and cranial musculoskeletal systems for suction feeding.

Advances in comparative physiology from high-speed imaging of animal and fluid motion

Since the time of Muybridge and Marey in the last half of the nineteenth century, studies of animal movement have relied on some form of high-speed or stop-action imaging to permit analysis of appendage and body motion. In the past ten years, the advent of megapixel-resolution high-speed digital imaging with maximal framing rates of 250 to 100,000 images per second has allowed new views of musculoskeletal function in comparative physiology that now extend to imaging flow around moving animals and the calculation of fluid forces produced by animals moving in fluids. In particular, the technique of digital particle image velocimetry (DPIV) has revolutionized our ability to understand how moving animals generate fluid forces and propel themselves through air and water. DPIV algorithms generate a matrix of velocity vectors through the use of image cross-correlation, which can then be used to calculate the force exerted on the fluid as well as locomotor work and power. DPIV algorithms can also be applied to images of moving animals to calculate the velocity of different regions of the moving animal, providing a much more detailed picture of animal motion than can traditional digitizing methods. Although three-dimensional measurement of animal motion is now routine, in the near future model-based kinematic reconstructions and volumetric analyses of animal-generated fluid flow patterns will provide the next step in imaging animal biomechanics and physiology.