Expression of the genes (, , , , and ) in

An improved pathway for autonomous bioluminescence imaging in eukaryotes

The discovery of the bioluminescence pathway in the fungus Neonothopanus nambi enabled engineering of eukaryotes with self-sustained luminescence. However, the brightness of luminescence in heterologous hosts was limited by performance of the native fungal enzymes. Here we report optimized versions of the pathway that enhance bioluminescence by one to two orders of magnitude in plant, fungal and mammalian hosts, and enable longitudinal video-rate imaging.

The role of Photorhabdus-induced bioluminescence and red cadaver coloration on the deterrence of insect scavengers from entomopathogenic nematode-infected cadavers

Photorhabdus spp. and Xenorhabdus spp. bacteria produce a variety of molecules that inhibit bacterial and fungal contamination as well as deter scavenging invertebrates and some vertebrates in soil. Certain Heterorhabditis/Photorhabdus-infected insect cadavers can be bioluminescent in the dark and/or turn red from the production of anthraquinone pigments. The role of these traits remains unresolved. The aim of the present study was to evaluate the role of red color (anthraquinone) and bioluminescence on the deterrence of insect scavengers. Our data shows that scavenger deterrent factor (SDF) is not related to red cadaver coloration or bioluminescence activity as crickets and ants did not consume Galleria mellonella cadavers infected by P. laumondii strain 48-02 and X. bovienii. Both bacteria exhibit SDF activity but do not produce anthraquinone. Also, the insects were not affected by anthraquinone in agar plugs prepared with supernatant from induced P. laumondii Δpptase Pcep-KM-antA (SVS-275) mutant strain, which overproduces anthraquinone. Since bioluminescence and anthraquinone are not responsible for SDF activity against insect scavengers, more studies are needed to elucidate the SDF compound from Xenorhabdus and Photorhabdus bacteria.

Generation of bright autobioluminescent bacteria by chromosomal integration of the improved lux operon ilux2

The bacterial bioluminescence system enables the generation of light by living cells without the requirement of an external luciferin. Due to the relatively low light emission, many applications of bioluminescence imaging would benefit from an increase in brightness of this system. In this report, a new approach of mutagenesis and screening of the involved proteins is described that is based on the identification of mutants with improved properties under rate-limiting reaction conditions. Multiple rounds of screening in Escherichia coli resulted in the operon ilux2 that contains 26 new mutations in the fatty acid reductase complex which provides the aldehyde substrate for the bioluminescence reaction. Chromosomal integration of ilux2 yielded an autonomously bioluminescent E. coli strain with sixfold increased brightness compared to the previously described ilux operon. The ilux2 strain produces sufficient signal for the robust detection of individual cells and enables highly sensitive long-term imaging of bacterial propagation without a selection marker.

Rapid and reagent-free bioassay using autobioluminescent yeasts to detect agonistic and antagonistic activities of bisphenols against rat androgen receptor and progesterone receptor

Bisphenol A (BPA) and its analogues have been classified as endocrine disruptors via binding to nuclear receptors. Two novel bioassays, BLYrARS and BLYrPRS, were developed for rapid detection of agonistic and antagonistic activities of BPA and five of its analogues binding rat androgen receptor (rAR) and rat progesterone receptor (rPR). The reporter bioassay was based on two autonomously bioluminescent strains of the yeast Saccharomyces cerevisiae, recombined with a bacterial luciferase reporter gene cassette (lux) that can produce autofluorescence, regulated by the corresponding hormone response element acting as the responsive promoter. The bioluminescent signal is autonomous and continuous without cell lysis or addition of exogenous reagents. The AR agonist R1881 could be detected at 4 h with a half-maximal effective concentration (EC₅₀) of ~9.4 nM. The PR agonist progesterone could be determined at 4 h with an EC₅₀ of ~2.74 nM. None of the sixteen bisphenols presented agonistic activities against rAR and rPR. However, thirteen BPs were rAR antagonists and eleven BPs acted as rPR antagonists with different potency. The BLYrARS and BLYrPRS bioassay characterized by automated signal acquisition without additional manipulations or cost can be applied for simple and rapid detection of agonistic and antagonistic activities of BPs and other compounds acting as agonists or antagonists of rAR and rPR. Based on data derived by use of this bioassay endocrine-disrupting activities of some BPA analogues are more potent than BPA.

An Autobioluminescent Method for Evaluating In Vitro and In Vivo Growth of Rhodococcus equi

A previously reported method for evaluating the intracellular growth of Rhodococcus equi using enhanced green fluorescent protein is unsuitable for the quantitative evaluation of the entire sample because the signal can be detected only in the excitation region. Therefore, we created an autobioluminescent R. equi using luciferase (luxABCDE). First, we connected luxABCDE to the functional promoter P_aphII and introduced it into the chromosomes of ATCC33701 and ATCC33701_P-. Luminescence was detected in both transformants, and a correlation between the bacterial number and luminescence intensity in the logarithmic phase was observed, indicating that luxABCDE is functionally and quantitatively expressed in R. equi. The luminescence of ATCC33701 was significantly higher than that of ATCC33701_P- at 24 h after infection with J774A.1. Next, RNA-Seq analysis of ATCC33701 to search for endogenous high-expression promoters resulted in the upstream sequences of RS29370, RS41760, and vapA being selected as candidates. Luminescence was detected in each transformant expressing the luxABCDE using these upstream sequences. We examined the luminescence intensity by coexpressing the frp gene, an enhancer of the luciferase reaction, with luxABCDE. The luminescence intensity of the coexpressing transformant was significantly enhanced in J774A.1 compared with the non-coexpressing transformant. Finally, we examined the luminescence in vivo. The luminescence signals in the organs peaked on the third day following the administration of ATCC33701 derivatives in mice, but no luminescence signal was detected when the ATCC33701_P- derivative was administered. The autologous bioluminescent method described herein will enhance the in vitro and in vivo quantitative analysis of R. equi proliferation.

IMPORTANCE We established an autologous bioluminescent strain of R. equi and a method to evaluate its proliferation in vitro and in vivo quantitatively. This method overcomes the weakness of the fluorescence detection system that only measures the site of excitation light irradiation. It is expected to be used as an in vitro and in vivo growth evaluation method with excellent quantitative properties. In addition, it was suggested that the selection of a promoter that expresses luxABCDE could produce a luminescence with high intensity. Although this method needs further improvement, such as creating transformants that can maintain high luminescence intensity regardless of environmental changes such as temperature fluctuations, it is possible to observe bacterial growth over time in mice without killing them. Therefore, this method can be used to not only evaluate the pathogenicity of various wild and gene-deficient strains but also to screen preventive and therapeutic methods such as vaccines.

Cryo-EM structure of the fatty acid reductase LuxC-LuxE complex provides insights into bacterial bioluminescence

The discovery of reduced flavin mononucleotide and fatty aldehydes as essential factors of light emission facilitated study of bacterial luminescence. Although the molecular mechanisms underlying bacterial luminescence have been studied for more than 60 years, the structure of the bacterial fatty acid reductase complex remains unclear. Here, we report the cryo-EM structure of the Photobacterium phosphoreum fatty acid reductase complex LuxC–LuxE to a resolution of 2.79 Å. We show that the active site Lys238/Arg355 pair of LuxE is >30 Å from the active site Cys296 of LuxC, implying that catalysis relies on a large conformational change. Furthermore, mutagenesis and biochemical experiments support that the L-shaped cleft inside LuxC plays an important role in substrate binding and reaction. We obtained a series of mutants with significantly improved activity as measured by in vitro bioluminescence assays and demonstrated that the double mutant W111A/F483K displayed the highest activity (370% of the WT). Our results indicated that the activity of LuxC significantly affects the bacterial bioluminescence reaction. Finally, we expressed this mutated lux operon in Escherichia coli but observed that the in vivo concentrations of ATP and NADPH limited the enzyme activity; thus, we conclude that the luminous intensity mainly depends on the level of metabolic energy.

Enhanced brightness of bacterial luciferase by bioluminescence resonance energy transfer

Using the lux operon (luxCDABE) of bacterial bioluminescence system as an autonomous luminous reporter has been demonstrated in bacteria, plant and mammalian cells. However, applications of bacterial bioluminescence-based imaging have been limited because of its low brightness. Here, we engineered the bacterial luciferase (heterodimer of luxA and luxB) by fusion with Venus, a bright variant of yellow fluorescent protein, to induce bioluminescence resonance energy transfer (BRET). By using decanal as an externally added substrate, color change and ten-times enhancement of brightness was achieved in Escherichia coli when circularly permuted Venus was fused to the C-terminus of luxB. Expression of the Venus-fused luciferase in human embryonic kidney cell lines (HEK293T) or in Nicotiana benthamiana leaves together with the substrate biosynthesis-related genes (luxC, luxD and luxE) enhanced the autonomous bioluminescence. We believe the improved luciferase will forge the way towards the potential development of autobioluminescent reporter system allowing spatiotemporal imaging in live cells.

Bioluminescent Xanthomonas hortorum pv. gardneri as a Tool to Quantify Bacteria in Planta, Screen Germplasm, and Identify Infection Routes on Leaf Surfaces

Imaging technology can provide insight into biological processes governing plant-pathogen interactions. We created and used a bioluminescent strain of Xanthomonas hortorum pv. gardneri (Xgb) to quantify infection processes in plants using tomato as a model. An X. hortorum pv. gardneri is one of the four Xanthomonas species that causes bacterial spots in tomatoes. We used Xgb to quantify bacterial growth in planta, to assess disease severity in resistant and susceptible tomato lines, and to observe infection routes in leaves. A positive and significant linear correlation r (67) = 0.57, p ≤ 0.0001 was observed between bioluminescence signals emitted by Xgb in planta and bacterial populations determined through dilution plating. Based on bioluminescence imaging, resistant and susceptible tomato lines had significantly different average radiances. In addition, there was a positive and significant correlation r = 0.45, p = 0.024 between X. hortorum pv. gardneri-inoculated tomato lines evaluated by bioluminescence imaging and tomatoes rated in the field using the Horsfall-Barrat Scale. Heritability was calculated to compare the genetic variance for disease severity using bioluminescence imaging and classical field ratings. The genetic variances were 25 and 63% for bioluminescence imaging and field ratings, respectively. The disadvantage of lower heritability attained by bioluminescence imaging may be offset by the ability to complete germplasm evaluation experiments within 30 days rather than 90-120 days in field trials. We further explored X. hortorum pv. gardneri infection routes on leaves using spray and dip inoculation techniques. Patterns of bioluminescence demonstrated that the inoculation technique affected the distribution of bacteria, an observation verified using scanning electron microscopy (SEM). We found significant non-random distributions of X. hortorum pv. gardneri on leaf surfaces with the method of inoculation affecting bacterial distribution on leaf surfaces at 4 h postinoculation (hpi). At 18 hpi, regardless of inoculation method, X. hortorum pv. gardneri localized on leaf edges near hydathodes based on bioluminescence imaging and confirmed by electron microscopy. These findings demonstrated the utility of bioluminescent X. hortorum pv. gardneri to estimate bacterial populations in planta, to select for resistant germplasm, and to detect likely points of infection.

Development of a Murine Model of Pyogenic Flexor Tenosynovitis

BACKGROUND

Pyogenic flexor tenosynovitis is a debilitating infection of the hand flexor tendon sheath with high morbidity despite standard treatments of empiric antibiotics with irrigation and debridement. In vivo studies in the available literature have used avian models, but these models are difficult to scale and maintain. The purpose of this study was to demonstrate the plausibility of a murine model of pyogenic flexor tenosynovitis utilizing bioluminescence imaging and tissue analysis at harvest.

METHODS

A 2-μL inoculate of bioluminescent Xen29 Staphylococcus aureus or sterile phosphate-buffered saline solution (sPBS) was administered to the tendon sheath of 36 male C57BL/6J mice. The infectious course was monitored by bioluminescence imaging (BLI) via an in vivo imaging system, gross anatomic deformity, and weight change. The infected hind paws were harvested at 4 time points: 24 hours, 72 hours, 1 week, and 2 weeks for histological analysis using Alcian blue, hematoxylin, and Orange-G staining. Two-way analysis of variance with the Sidak multiple comparison test was used to assess differences in bioluminescence and weight at each time point.

RESULTS

The infected cohort displayed significantly elevated bioluminescence values, had reductions in weight, and exhibited swelling of the infected digit throughout the course of infection. By day 4, most infected mice saw a substantial decrease in BLI signal intensity; however, 2 infected mice exhibited persistent BLI intensity through day 14. Histological analysis of the infected cohort showed tissue disorganization and the presence of a cellular infiltrate in and around the flexor tendon sheath.

CONCLUSIONS

A murine model of pyogenic flexor tenosynovitis is possible and can serve as an experimental platform for further investigation of the pathophysiology of pyogenic flexor tenosynovitis.

CLINICAL RELEVANCE

This animal model can be utilized in elucidating the basic molecular and/or cellular mechanisms of pyogenic flexor tenosynovitis while simultaneously evaluating novel therapeutic strategies.

Palette of Luciferases: Natural Biotools for New Applications in Biomedicine

Optoanalytical methods based on using genetically encoded bioluminescent enzymes, luciferases, allow one to obtain highly sensitive signals, are non-invasive, and require no external irradiation. Bioluminescence is based on the chemical reaction of oxidation of a low-molecular-weight substrate (luciferin) by atmospheric oxygen, which is catalyzed by an enzyme (luciferase). Relaxation of the luciferin oxidation product from its excited state is accompanied by a release of a quantum of light, which can be detected as an analytical signal. The ability to express luciferase genes in various heterological systems and high quantum yields of luminescence reactions have made these tools rather popular in biology and medicine. Among several naturally available luciferases, a few have been found to be useful for practical application. Luciferase size, the wavelength of its luminescence maximum, enzyme thermostability, optimal pH of the reaction, and the need for cofactors are parameters that may differ for luciferases from different groups of organisms, and this fact directly affects the choice of the application area for each enzyme. It is quite important to overview the whole range of currently available luciferases based on their biochemical properties before choosing one bioluminescent probe suitable for a specific application.

High-Throughput Analysis of Endocrine-Disrupting Compounds Using BLYES and BLYAS Bioluminescent Yeast Bioassays

Bioluminescent yeast assays BLYES and BLYAS are whole-cell bioassays that utilize genetically modified Saccharomyces cerevisiae bioreporters to detect estrogenic and androgenic activities, respectively. The bioreporter strains chromosomally express human estrogen receptor alpha (BLYES) or androgen receptor (BLYAS) and contain a reporter plasmid expressing the complete bacterial luciferase gene cassette (luxCDABE) under the control of an estrogen- or androgen-responsive promoter. Exposure to endocrine-disrupting compounds activates the receptor which subsequently turns on the expression of the reporter genes, resulting in dose-dependent bioluminescence (i.e., light) emission. These yeast whole-cell bioassays provide rapid, cost-effective, and high-throughput detection of endocrine-disrupting activities in environmental samples. This protocol will provide a detailed description of the standard assay procedures as well as a framework for data analysis.

Autonomous bioluminescent systems: prospects for use in the imaging of living organisms

Bioluminescent systems are increasingly being used for the development of highly sensitive optical imaging techniques in vivo. However, it is necessary to inject expensive and unstable synthetic substrates (luciferins) before each analysis for most of the systems applied. Autonomous bacterial and fungal bioluminescent systems, that recently have become available for implementation in eukaryotic cells, in our opinion, may be developed into an effective tool in new technologies of bioluminescent imaging.

Autonomous bioluminescence imaging of single mammalian cells with the bacterial bioluminescence system

Bioluminescence-based imaging of living cells has become an important tool in biological and medical research. However, many bioluminescence imaging applications are limited by the requirement of an externally provided luciferin substrate and the low bioluminescence signal which restricts the sensitivity and spatiotemporal resolution. The bacterial bioluminescence system is fully genetically encodable and hence produces autonomous bioluminescence without an external luciferin, but its brightness in cell types other than bacteria has, so far, not been sufficient for imaging single cells. We coexpressed codon-optimized forms of the bacterial luxCDABE and frp genes from multiple plasmids in different mammalian cell lines. Our approach produces high luminescence levels that are comparable to firefly luciferase, thus enabling autonomous bioluminescence microscopy of mammalian cells.

A brief review of bioluminescent systems (2019)

Despite being widely used in reporter technologies, bioluminescent systems are largely understudied. Of at least forty different bioluminescent systems thought to exist in nature, molecular components of only seven light-emitting reactions are known, and the full biochemical pathway leading to light emission is only understood for two of them. Here, we provide a succinct overview of currently known bioluminescent systems highlighting available tools for research and discussing future applications.

A bioluminescent system of fungi: prospects for application in medical research

Bioluminescence is chemical oxidation of a small luciferin molecule by air catalyzed by luciferase and accompanied by the emission of photons in the visible spectrum. This reaction is used in bioluminescent bioimaging, the method for the visualization of organism’s interior. Bioimaging is a popular tool used in medical research. However, it has an unfortunate drawback: it requires introduction of external luciferin to the system before every experiment. In this work we discuss a possibility of developing an autonomous luminescent system in eukaryotes based on the bioluminescent system of higher fungi.

1001 lights: luciferins, luciferases, their mechanisms of action and applications in chemical analysis, biology and medicine

Bioluminescence (BL) is a spectacular phenomenon involving light emission by live organisms. It is caused by the oxidation of a small organic molecule, luciferin, with molecular oxygen, which is catalysed by the enzyme luciferase. In nature, there are approximately 30 different BL systems, of which only 9 have been studied to various degrees in terms of their reaction mechanisms. A vast range of in vitro and in vivo analytical techniques have been developed based on BL, including tests for different analytes, immunoassays, gene expression assays, drug screening, bioimaging of live organisms, cancer studies, the investigation of infectious diseases and environmental monitoring. This review aims to cover the major existing applications for bioluminescence in the context of the diversity of luciferases and their substrates, luciferins. Particularly, the properties and applications of d-luciferin, coelenterazine, bacterial, Cypridina and dinoflagellate luciferins and their analogues along with their corresponding luciferases are described. Finally, four other rarely studied bioluminescent systems (those of limpet Latia, earthworms Diplocardia and Fridericia and higher fungi), which are promising for future use, are also discussed.

A rapid and reagent-free bioassay for the detection of dioxin-like compounds and other aryl hydrocarbon receptor (AhR) agonists using autobioluminescent yeast

An autonomously bioluminescent Saccharomyces cerevisiae BLYAhS bioreporter was developed in this study for the simple and rapid detection of dioxin-like compounds (DLCs) and aryl hydrocarbon receptor (AhR) agonists. This recombinant yeast reporter was based on a synthetic bacterial luciferase reporter gene cassette (lux) that can produce the luciferase as well as the enzymes capable of self-synthesizing the requisite substrates for bioluminescent production from endogenous cellular metabolites. As a result, bioluminescent signal production is generated continuously and autonomously without cell lysis or exogenous reagent addition. By linking the expression of the autobioluminescent lux reporter cassette to AhR activation via the use of a dioxin-responsive promoter, the S. cerevisiae BLYAhS bioreporter emitted a bioluminescent signal in response to DLC exposure in a dose-responsive manner. The model dioxin, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), could be detected within 4 h with a half maximal effective concentration (EC₅₀) of ~ 8.1 nM and a lower detection limit of 500 pM. The autobioluminescent response of BLYAhS to other AhR agonists, including 2,3,7,8-tetrachlorodibenzofuran (TCDF), polychlorinated bisphenyl congener 126 (PCB-126) and 169 (PCB-169), 1,2,3,6,7,8-hexachlorodibenzo-p-dioxin (HxCDD), 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin (HpCDD), benzo[a]pyrene (BaP), and β-naphthoflavone (bNF), were also characterized in this study. The non-destructive and reagent-free nature of the BLYAhS reporter assay facilitated near-continuous, automated signal acquisition without additional hands-on effort and cost, providing a simple and cost-effective method for rapid DLC detection.

Application of internal standard method in recombinant luminescent bacteria test

Mercury and its organic compounds have been of severe concern worldwide due to their damage to the ecosystem and human health. The development of effective and affordable technology to monitor and signal the presence of bioavailable mercury is an urgent need. The Mer gene is a mercury-responsive resistant gene, and a mercury-sensing recombinant luminescent bacterium using the Mer gene was constructed in this study. The mer operon from marine Pseudomonas putida strain SP1 was amplified and fused with prompterless luxCDABE in the pUCD615 plasmid within Escherichia coli cells, resulting in pTHE30-E. coli. The recombinant strain showed high sensitivity and specificity. The detection limit of Hg(2+) was 5nmol/L, and distinct luminescence could be detected in 30min. Cd(2+), Cu(2+), Zn(2+), Ca(2+), Pb(2+), Mg(2+), Mn(2+), and Al(3+) did not interfere with the detection over a range of 10(-5)-1mM. Application of recombinant luminescent bacteria testing in environmental samples has been a controversial issue: especially for metal-sensing recombinant strains, false negatives caused by high cytotoxicity are one of the most important issues when applying recombinant luminescent bacteria in biomonitoring of heavy metals. In this study, by establishing an internal standard approach, the false negative problem was overcome; furthermore, the method can also help to estimate the suspected mercury concentration, which ensures high detection sensitivity of bioavailable Hg(2+).

Measurement of Bacterial Bioluminescence Intensity and Spectrum: Current Physical Techniques and Principles

: Bioluminescence is light production by living organisms, which can be observed in numerous marine creatures and some terrestrial invertebrates. More specifically, bacterial bioluminescence is the "cold light" produced and emitted by bacterial cells, including both wild-type luminescent and genetically engineered bacteria. Because of the lively interplay of synthetic biology, microbiology, toxicology, and biophysics, different configurations of whole-cell biosensors based on bacterial bioluminescence have been designed and are widely used in different fields, such as ecotoxicology, food toxicity, and environmental pollution. This chapter first discusses the background of the bioluminescence phenomenon in terms of optical spectrum. Platforms for bacterial bioluminescence detection using various techniques are then introduced, such as a photomultiplier tube, charge-coupled device (CCD) camera, micro-electro-mechanical systems (MEMS), and complementary metal-oxide-semiconductor (CMOS) based integrated circuit. Furthermore, some typical biochemical methods to optimize the analytical performances of bacterial bioluminescent biosensors/assays are reviewed, followed by a presentation of author's recent work concerning the improved sensitivity of a bioluminescent assay for pesticides. Finally, bacterial bioluminescence as implemented in eukaryotic cells, bioluminescent imaging, and cancer cell therapies is discussed.

Engineering an enhanced, thermostable, monomeric bacterial luciferase gene as a reporter in plant protoplasts

The application of the luxCDABE operon of the bioluminescent bacterium Photorhabdus luminescens as a reporter has been published for bacteria, yeast and mammalian cells. We report here the optimization of fused luxAB (the bacterial luciferase heterodimeric enzyme) expression, quantum yield and its application as a reporter gene in plant protoplasts. The fused luxAB gene was mutated by error prone PCR or chemical mutagenesis and screened for enhanced luciferase activity utilizing decanal as substrate. Positive luxAB mutants with superior quantum yield were subsequently shuffled by DNase I digestion and PCR assembly for generation of recombinants with additional increases in luciferase activity in bacteria. The coding sequence of the best recombinant, called eluxAB, was then optimized further to conform to Arabidopsis (Arabidopsis thaliana) codon usage. A plant expression vector of the final, optimized eluxAB gene (opt-eluxAB) was constructed and transformed into protoplasts of Arabidopsis and maize (Zea mays). Luciferase activity was dramatically increased for opt-eluxAB compared to the original luxAB in Arabidopsis and maize cells. The opt-eluxAB driven by two copies of the 35S promoter expresses significantly higher than that driven by a single copy. These results indicate that the eluxAB gene can be used as a reporter in plant protoplasts. To our knowledge, this is the first report to engineer the bacterium Photorhabdus luminescens luciferase luxAB as a reporter by directed evolution which paved the way for further improving the luxAB reporter in the future.

Evaluation of the ecotoxicity of pollutants with bioluminescent microorganisms

This chapter deals with the use of bioluminescent microorganisms in environmental monitoring, particularly in the assessment of the ecotoxicity of pollutants. Toxicity bioassays based on bioluminescent microorganisms are an interesting complement to classical toxicity assays, providing easiness of use, rapid response, mass production, and cost effectiveness. A description of the characteristics and main environmental applications in ecotoxicity testing of naturally bioluminescent microorganisms, covering bacteria and eukaryotes such as fungi and dinoglagellates, is reported in this chapter. The main features and applications of a wide variety of recombinant bioluminescent microorganisms, both prokaryotic and eukaryotic, are also summarized and critically considered. Quantitative structure-activity relationship models and hormesis are two important concepts in ecotoxicology; bioluminescent microorganisms have played a pivotal role in their development. As pollutants usually occur in complex mixtures in the environment, the use of both natural and recombinant bioluminescent microorganisms to assess mixture toxicity has been discussed. The main information has been summarized in tables, allowing quick consultation of the variety of luminescent organisms, bioluminescence gene systems, commercially available bioluminescent tests, environmental applications, and relevant references.

The transfer of reduced flavin mononucleotide from LuxG oxidoreductase to luciferase occurs via free diffusion

Bacterial luciferase (LuxAB) is a two-component flavin mononucleotide (FMN)-dependent monooxygenase that catalyzes the oxidation of reduced FMN (FMNH(-)) and a long-chain aliphatic aldehyde by molecular oxygen to generate oxidized FMN, the corresponding aliphatic carboxylic acid, and concomitant emission of light. The LuxAB reaction requires a flavin reductase to generate FMNH(-) to serve as a luciferin in its reaction. However, FMNH(-) is unstable and can react with oxygen to generate H2O2, so that it is important to transfer it efficiently to LuxAB. Recently, LuxG has been identified as a NADH:FMN oxidoreductase that supplies FMNH(-) to luciferase in vivo. In this report, the mode of transfer of FMNH(-) between LuxG from Photobacterium leiognathi TH1 and LuxABs from both P. leiognathi TH1 and Vibrio campbellii (PlLuxAB and VcLuxAB, respectively) was investigated using single-mixing and double-mixing stopped-flow spectrophotometry. The oxygenase component of p-hydroxyphenylacetate hydroxylase (C2) from Acinetobacter baumannii, which has no structural similarity to LuxAB, was used to measure the kinetics of release of FMNH(-) from LuxG. With all FMNH(-) acceptors used (C2, PlLuxAB, and VcLuxAB), the kinetics of FMN reduction on LuxG were the same, showing that LuxG releases FMNH(-) with a rate constant of 4.5-6 s(-1). Our data showed that the kinetics of binding of FMNH(-)to PlLuxAB and VcLuxAB and the subsequent reactions with oxygen were the same with either free FMNH(-) or FMNH(-) generated in situ by LuxG. These results strongly suggest that no complexes between LuxG and the various species are necessary to transfer FMNH(-) to the acceptors. The kinetics of the overall reactions and the individual rate constants correlate well with a free diffusion model for the transfer of FMNH(-) from LuxG to either LuxAB.

Genetically modified whole-cell bioreporters for environmental assessment

Living whole-cell bioreporters serve as environmental biosentinels that survey their ecosystems for harmful pollutants and chemical toxicants, and in the process act as human and other higher animal proxies to pre-alert for unfavorable, damaging, or toxic conditions. Endowed with bioluminescent, fluorescent, or colorimetric signaling elements, bioreporters can provide a fast, easily measured link to chemical contaminant presence, bioavailability, and toxicity relative to a living system. Though well tested in the confines of the laboratory, real-world applications of bioreporters are limited. In this review, we will consider bioreporter technologies that have evolved from the laboratory towards true environmental applications, and discuss their merits as well as crucial advancements that still require adoption for more widespread utilization. Although the vast majority of environmental monitoring strategies rely upon bioreporters constructed from bacteria, we will also examine environmental biosensing through the use of less conventional eukaryotic-based bioreporters, whose chemical signaling capacity facilitates a more human-relevant link to toxicity and health-related consequences.

Bacterial vectors for imaging and cancer gene therapy: a review

The significant burden of resistance to conventional anticancer treatments in patients with advanced disease has prompted the need to explore alternative therapeutic strategies. The challenge for oncology researchers is to identify a therapy which is selective for tumors with limited toxicity to normal tissue. Engineered bacteria have the unique potential to overcome traditional therapies' limitations by specifically targeting tumors. It has been shown that bacteria are naturally capable of homing to tumors when systemically administered resulting in high levels of replication locally, either external to (non-invasive species) or within tumor cells (pathogens). Pre-clinical and clinical investigations involving bacterial vectors require relevant means of monitoring vector trafficking and levels over time, and development of bacterial-specific real-time imaging modalities are key for successful development of clinical bacterial gene delivery. This review discusses the currently available imaging technologies and the progress to date exploiting these for monitoring of bacterial gene delivery in vivo.

The evolution of the bacterial luciferase gene cassette (lux) as a real-time bioreporter

The bacterial luciferase gene cassette (lux) is unique among bioluminescent bioreporter systems due to its ability to synthesize and/or scavenge all of the substrate compounds required for its production of light. As a result, the lux system has the unique ability to autonomously produce a luminescent signal, either continuously or in response to the presence of a specific trigger, across a wide array of organismal hosts. While originally employed extensively as a bacterial bioreporter system for the detection of specific chemical signals in environmental samples, the use of lux as a bioreporter technology has continuously expanded over the last 30 years to include expression in eukaryotic cells such as Saccharomyces cerevisiae and even human cell lines as well. Under these conditions, the lux system has been developed for use as a biomedical detection tool for toxicity screening and visualization of tumors in small animal models. As the technologies for lux signal detection continue to improve, it is poised to become one of the first fully implantable detection systems for intra-organismal optical detection through direct marriage to an implantable photon-detecting digital chip. This review presents the basic biochemical background that allows the lux system to continuously autobioluminesce and highlights the important milestones in the use of lux-based bioreporters as they have evolved from chemical detection platforms in prokaryotic bacteria to rodent-based tumorigenesis study targets. In addition, the future of lux imaging using integrated circuit microluminometry to image directly within a living host in real-time will be introduced and its role in the development of dose/response therapeutic systems will be highlighted.

A destabilized bacterial luciferase for dynamic gene expression studies

Fusions of genetic regulatory elements with reporter genes have long been used as tools for monitoring gene expression and have become a major component in synthetic gene circuit implementation. A major limitation of many of these systems is the relatively long half-life of the reporter protein(s), which prevents monitoring both the initiation and the termination of transcription in real-time. Furthermore, when used as components in synthetic gene circuits, the long time constants associated with reporter protein decay may significantly degrade circuit performance. In this study, short half-life variants of LuxA and LuxB from Photorhabdus luminescens were constructed in Escherichia coli by inclusion of an 11-amino acid carboxy-terminal tag that is recognized by endogenous tail-specific proteases. Results indicated that the addition of the C-terminal tag affected the functional half-life of the holoenzyme when the tag was added to luxA or to both luxA and luxB, but modification of luxB alone did not have a significant effect. In addition, it was also found that alteration of the terminal three amino acid residues of the carboxy-terminal tag fused to LuxA generated variants with half-lives of intermediate length in a manner similar to that reported for GFP. This report is the first instance of the C-terminal tagging approach for the regulation of protein half-life to be applied to an enzyme or monomer of a multi-subunit enzyme complex and will extend the utility of the bacterial luciferase reporter genes for the monitoring of dynamic changes in gene expression.

The art of reporter proteins in science: past, present and future applications

Starting with the first publication of lacZ gene fusion in 1980, reporter genes have just entered their fourth decade. Initial studies relied on the simple fusion of a promoter or gene with a particular reporter gene of interest. Such constructs were then used to determine the promoter activity under specific conditions or within a given cell or organ. Although this protocol was, and still is, very effective, current research shows a paradigm shift has occurred in the use of reporter systems. With the advent of innovative cloning and synthetic biology techniques and microfluidic/nanodroplet systems, reporter genes and their proteins are now finding themselves used in increasingly intricate and novel applications. For example, researchers have used fluorescent proteins to study biofilm formation and discovered that microchannels develop within the biofilm. Furthermore, there has recently been a "fusion" of art and science; through the construction of genetic circuits and regulatory systems, researchers are using bacteria to "paint" pictures based upon external stimuli. As such, this review will discuss the past and current trends in reporter gene applications as well as some exciting potential applications and models that are being developed based upon these remarkable proteins.

Noninvasive biophotonic imaging for studies of infectious disease

According to World Health Organization estimates, infectious organisms are responsible for approximately one in four deaths worldwide. Animal models play an essential role in the development of vaccines and therapeutic agents but large numbers of animals are required to obtain quantitative microbiological data by tissue sampling. Biophotonic imaging (BPI) is a highly sensitive, nontoxic technique based on the detection of visible light, produced by luciferase-catalysed reactions (bioluminescence) or by excitation of fluorescent molecules, using sensitive photon detectors. The development of bioluminescent/fluorescent microorganisms therefore allows the real-time noninvasive detection of microorganisms within intact living animals. Multiple imaging of the same animal throughout an experiment allows disease progression to be followed with extreme accuracy, reducing the number of animals required to yield statistically meaningful data. In the study of infectious disease, the use of BPI is becoming widespread due to the novel insights it can provide into established models, as well as the impact of the technique on two of the guiding principles of using animals in research, namely reduction and refinement. Here, we review the technology of BPI, from the instrumentation through to the generation of a photonic signal, and illustrate how the technique is shedding light on infection dynamics in vivo.

Autonomous bioluminescent expression of the bacterial luciferase gene cassette (lux) in a mammalian cell line

Background

The bacterial luciferase (lux) gene cassette consists of five genes (luxCDABE) whose protein products synergistically generate bioluminescent light signals exclusive of supplementary substrate additions or exogenous manipulations. Historically expressible only in prokaryotes, the lux operon was re-synthesized through a process of multi-bicistronic, codon-optimization to demonstrate for the first time self-directed bioluminescence emission in a mammalian HEK293 cell line in vitro and in vivo.

Methodology/Principal Findings

Autonomous in vitro light production was shown to be 12-fold greater than the observable background associated with untransfected control cells. The availability of reduced riboflavin phosphate (FMNH₂) was identified as the limiting bioluminescence substrate in the mammalian cell environment even after the addition of a constitutively expressed flavin reductase gene (frp) from Vibrio harveyi. FMNH₂ supplementation led to a 151-fold increase in bioluminescence in cells expressing mammalian codon-optimized luxCDE and frp genes. When injected subcutaneously into nude mice, in vivo optical imaging permitted near instantaneous light detection that persisted independently for the 60 min length of the assay with negligible background.

Conclusions/Significance

The speed, longevity, and self-sufficiency of lux expression in the mammalian cellular environment provides a viable and powerful alternative for real-time target visualization not currently offered by existing bioluminescent and fluorescent imaging technologies.

Transcriptional profiling of Saccharomyces cerevisiae upon exposure to saxitoxin

Saxitoxin is a potent neurotoxin produced by several species of dinoflagellates and cyanobacteria. The molecular target of saxitoxin in higher eukaryotes is the voltage-gated sodium channel; however, its target in lower eukaryotic organisms remains unknown. The goal of this study was to obtain the transcriptional fingerprint of the model lower eukaryote Saccharomyces cerevisiae upon exposure to saxitoxin to identify potential genes suitable for biomarker development. Microarray analyses identified multiple genes associated with copper and iron homeostasis and sulfur metabolism as significantly differentially expressed upon exposure to saxitoxin; these results were verified with quantitative reverse-transcriptase PCR (qRT-PCR). Additionally, the qRT-PCR assays were used to generate expression profiles in a subset of the differentially regulated genes across multiple exposure times and concentrations, the results of which demonstrated that overall, genes tended to respond in a consistent manner to the toxin. In general, the genes encoding the metallothioneins CUP1 and CRS5 were induced following exposure to saxitoxin, while those encoding the ferric/ cupric reductase FRE1 and the copper uptake transporter CTR1 were repressed. The gene encoding the multicopper ferroxidase FET3, part of the high-affinity iron uptake system, was also induced in all treatments, along with the STR3 gene, which codes for the cystathionine beta-lyase found in the methionine biosynthetic pathway.

Improved lux reporters for use in Staphylococcus aureus

The use of luxABCDE (lux) offers certain advantages over other reporters, such as: lacZ and xylE. It is real time and its signal generation is produced without the requirement for any additional substrates. In some bacteria such as Staphylococcus spp, light production by luciferase is restricted because of a limited availability of endogenous substrates such as fatty acid aldehyde. We describe the construction of promoterless-lux cloning vectors, pGYlux and pAmilux. S. aureus carrying B. subtilis xyl/tetO promoter fused to the lux genes of pGYlux gave up to a 2.5-fold enhancement of luminescence over S. aureus carrying the xyl/tetO promoter fused to lux genes of the previously published parent vector pAL2. Furthermore, pAmilux showed a 6-fold enhancement of lux expression when compared to pGYlux in S. aureus. This was achieved by cloning the constitutive ami promoter upstream of the luxCDE genes to increase endogenous fatty acid aldehyde production while maintaining its reporter functionality by fusing promoters to the luxAB genes.

Saccharomyces cerevisiae BLYAS, a new bioluminescent bioreporter for detection of androgenic compounds

A Saccharomyces cerevisiae strain, capable of autonomous bioluminescence, was engineered to respond to androgenic chemicals. The strain, S. cerevisiae BLYAS, contains the human androgen receptor in the chromosome and was constructed by inserting a series of androgen response elements between divergent yeast promoters GPD and ADH1 on pUTK401 that constitutively expressed luxA and luxB to create pUTK420. Cotransformation of this plasmid with a second plasmid (pUTK404), containing the genes required for aldehyde synthesis (luxCDE) and FMN reduction (frp), yielded a bioluminescent bioreporter responsive to androgenic chemicals. Using dihydrotestosterone (DHT) as a standard, the response time and the 50% effective concentration values were 3 to 4 h and (9.7 +/- 4.6) x 10(-9) M, respectively. The lower limit of detection in response to DHT was 2.5 x 10(-9) M, and in response to testosterone it was 2.5 x 10(-10) M. This strain is suitable for high-throughput screening of chemicals with potential for remote environmental monitoring systems because of the assay speed, sensitivity, and self-containment.

Linking bacteriophage infection to quorum sensing signalling and bioluminescent bioreporter monitoring for direct detection of bacterial agents

AIM

To incorporate into the lambda phage genome, a luxI-based acyl-homoserine lactone (AHL) synthase genetic construct and exploit the autoamplified power of quorum sensing to translate a phage infection event into a chemical signature detectable by a lux-based bioluminescent bioreporter, with focus towards facile detection of microbial pathogens.

METHODS AND RESULTS

The luxI gene from Vibrio fischeri was inserted into the lambda phage genome to construct a model phage-based biosensor system for the general detection of Escherichia coli. The AHL signalling molecules synthesized upon phage infection are detected by an AHL-specific bioluminescent bioreporter based on the luxCDABE gene cassette of V. fischeri. The assay generates target-specific visible light signals with no requisite addition of extraneous substrate. This binary reporter system was able to autonomously respond to lambda phage infection events at target E. coli concentrations ranging from 1 x 10(8) to 1 CFU ml(-1) within 1.5-10.3 h, respectively, in pure culture. When assayed against artificially contaminated lettuce leaf washings, detection within an E. coli inoculum range from 1 x 10(8) to 130 CFU ml(-1) was achieved within 2.6-22.4 h, respectively.

CONCLUSIONS

The initial feasibility of binary phage-based reporter assays indicates that quorum sensing can be used to translate a phage infection event into an autoamplified chemical signature.

SIGNIFICANCE AND IMPACT OF STUDY

With further modification, binary phage-based reporter assays may be capable of rapidly and cost effectively detecting pathogenic agents at very low population densities.

Use of Saccharomyces cerevisiae BLYES expressing bacterial bioluminescence for rapid, sensitive detection of estrogenic compounds

An estrogen-inducible bacterial lux-based bioluminescent reporter was developed in Saccharomyces cerevisiae for applications in chemical sensing and environmental assessment of estrogen disruptor activity. The strain, designated S. cerevisiae BLYES, was constructed by inserting tandem estrogen response elements between divergent yeast promoters GPD and ADH1 on pUTK401 (formerly pUA12B7) that constitutively express luxA and luxB to create pUTK407. Cotransformation of this plasmid with a second plasmid (pUTK404) containing the genes required for aldehyde synthesis (luxCDE) and FMN reduction (frp) yielded a bioluminescent bioreporter responsive to estrogen-disrupting compounds. For validation purposes, results with strain BLYES were compared to the colorimetric-based estrogenic assay that uses the yeast lacZ reporter strain (YES). Strains BLYES and YES were exposed to 17beta-estradiol over the concentration range of 1.2 x 10(-8) through 5.6 x 10(-12) M. Calculated 50% effective concentration values from the colorimetric and bioluminescence assays (n = 7) were similar at (4.4 +/- 1.1) x 10(-10) and (2.4 +/- 1.0) x 10(-10) M, respectively. The lower and upper limits of detection for each assay were also similar and were approximately 4.5 x 10(-11) to 2.8 x 10(-9) M. Bioluminescence was observed in as little as 1 h and reached its maximum in 6 h. In comparison, the YES assay required a minimum of 3 days for results. Strain BLYES fills the niche for rapid, high-throughput screening of estrogenic compounds and has the ability to be used for remote, near-real-time monitoring of estrogen-disrupting chemicals in the environment.

Cloning and expression of D-lactonohydrolase cDNA from Fusarium moniliforme in Saccharomyces cerevisiae

A D-lactonohydrolase gene of about 1.1 kb was cloned from Fusarium moniliforme. The ORF sequence predicted a protein of 382 amino acids with a molecular mass of about 40 kDa. An expression plasmid carrying the gene under the control of the triose phosphate isomerase gene promotor was introduced into Saccharomyces cerevisiae, and the D-lactonohydrolase gene was successfully expressed in the recombinant strains.

In situ measurement of bioluminescence and fluorescence in an integrated microbioreactor

Reporter strains of bacteria that emit light or a fluorescent marker in response to specific conditions in their environment are having a significant impact in many areas of biology, including toxicity assays for environmental pollutants, chemical detection, and gene expression profiling. We have demonstrated methods for in situ measurements of bioluminescence and fluorescence from bacterial cultures grown in 50 microL instrumented microbioreactors. Results from microbioreactors were compared to results obtained from conventional 500 mL batch bioreactors and shake flasks. Experiments were conducted with reporter strains of Escherichia coli in which luxCDABE or gfp was fused to a promoter that was either expressed constitutively, or that responded to oxygen limitation. With these reporter strains, we have demonstrated the ability to obtain information on growth conditions within the microbioreactor. We have also shown that the large aspect ratio of the microbioreactor provides a unique advantage over measurements in larger bioreactors by reducing the inner filter effect in on-line measurements and eliminating the need for error-prone off-line dilutions. In addition, continuous on-line monitoring of genes in real-time, when expanded to include entire reporter libraries, could potentially provide a true dynamic picture of cellular gene expression from which the kinetics of gene expression can be untangled and elucidated.

In vivo bioluminescence imaging for integrated studies of infection

Understanding biological processes in the context of intact organ systems with fine temporal resolution has required the development of imaging strategies that reveal cellular and molecular changes in the living body. Reporter genes that confer optical signatures on a given biological process have been used widely in cell biology and have been used more recently to interrogate biological processes in living animal models of human biology and disease. The use of internal biological sources of light, luciferases, to tag cells, pathogens, and genes has proved to be a versatile tool to provide in vivo indicators that can be detected externally. The application of this technology to the study of animal models of infectious disease has not only provided insights into disease processes, but has also revealed new mechanisms by which pathogens may avoid host defences during infection.