Capillary electrochromatographic study of the interactions of porphyrin derivatives with amino acids and oligopeptides

Open-tubular capillary electrochromatographic application of a sol-gel matrix with chilli peppers, garlic, or synthetic additives

This article describes a possible combination of two promising fields of analytical chemistry-the preparation of sol-gel matrices with varying additives and their application in capillary electrochromatography. The inner surfaces of capillaries were coated with the sol-gel solution containing either pure synthetic chemical additive-alliin or capsaicin-or an extract of their natural sources-garlic and chilli pepper, respectively. The modified capillaries were tested for interaction with two neurotransmitters, oligopeptides and nucleotides under conditions of open-tubular capillary electrochromatography. Because both of the natural extracts also contain vitamin C and saccharose, the capillaries with sol-gel modifiers containing each of these substances were also tested. The obtained results from the perspective of changes in the electrochromatograms and the effective mobilities of analytes are discussed with respect to mild conditions both in the preparation process of the sol-gel matrix and during the separations.

Iron protoporphyrin-modified monolithic support for on-line preconcentration of angiotensin prior to CE analysis

An on-line preconcentration method using a polymeric monolithic support is proposed for the retention of the decapeptide angiotensin I and its subsequent analysis by CZE. Monolithic capillary columns were prepared in fused-silica (FS) capillaries of 150 microm id by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iron protoporphyrin IX (Fe-ProP). Monolithic microcolumns (8 mm long) were coupled on-line to the inlet of the separation capillary (FS capillary, 75 microm id x10 cm from the inlet to the microcolumn and 27 cm from the microcolumn to the detector). Angiotensin I was released from the sorbent by a 50 mM sodium phosphate, pH 2.5/ACN, 75:25 v/v solution and then analyzed by CZE with UV absorption detection at 214 nm. The concentration LOQ (CLOQ) was 0.5 ng/mL. The Fe-ProP-derivatized monolithic microcolumn coupled to the separation capillary exhibited a high retention capacity for peptide angiotensin I, and showed as much as 10,000-fold improvement in concentration sensitivity.

Application of cyclodextrins as modifiers in electrophoretic separation of metalloporphyrins

Several metallocomplexes of tetrakis-carboxyphenylporphyrin (TCPP) were separated on fused-silica capillary using CZE with UV-VIS detection. Metalloporphyrins of Co(II), Cu(II), Mn(II), Ni(II), and Zn(II) were formed directly in TCPP solution with addition of Cd(II) to increase the formation reaction rate. The composition of BGE, its concentration, and pH were optimized to ensure the stability of complexes and proper resolution. In particular, the problem of signals' shape was investigated and discussed. The presence of beta-CD in borate buffer significantly improved separation efficiency and signal shapes due to formation of inclusion complexes. Under the best separation conditions (50 mM borate running buffer at pH 9 with addition of 2 mM beta-CD, 30 kV applied voltage) a separation of metal complexes with TCPP was accomplished in 16 min.

Capillary electrochromatography of peptides and proteins

This review surveys the accomplishments in the separation of peptides and proteins by capillary electrochromatography (CEC) over the last decade. A significant number of research articles have been published on this topic since the last review. Peptide and proteins separations have been carried out in all three formats of CEC, i.e., packed bed, continuous bed and open-tubular (OT) format. In addition to electrophoresis, different chromatographic modes have been successfully exploited with the most prevalent being reversed-phase mode followed by ion-exchange. Although many researchers continue to use model proteins and peptides primarily to evaluate the performance of novel stationary phases some researchers have also applied CEC to the analysis of real-life samples. The potential of CEC to yield complementary information and sometimes a superior separation with respect to established techniques, i.e., microbore HPLC and capillary electrophoresis has been demonstrated. Instrumental modifications in order to facilitate coupling of CEC to mass spectrometry have further upgraded the value of CEC for proteomic analysis. Capillaries are still the separation vehicle of choice for most researchers yet the microfluidic platform is gaining momentum, propelled particularly by its potential for multitasking, e.g., performing different chromatographic modes in series.

Recent highlights in stationary phase design for open-tubular capillary electrochromatography

This review examines the most recent innovations made to achieve high performance in open-tubular capillary electrochromatography (OT-CEC) separations, focusing on the ingenious chemical and physical solutions made to increase the surface area and equip the stationary phase with exploitable selectivity. Among the approaches taken are chemically bonded ligands, etching with chemical bonding, sol-gels, molecularly imprinted polymers, porous layers, physically attached or adsorbed phases, and nanoparticle coatings. Particularly noteworthy are modern developments with macrocyclic receptor ligands, nanoparticles and open channel electrochromatography on-chip.

Separation of structurally related peptides by open-tubular capillary electrochromatography using (metallo)porphyrins as the adsorbed stationary phase

Several (metallo)porphyrins, particularly the porphyrin derivative tetraphenylporphyrin, and complexes of porphyrin derivatives with metal ions (Zn2+, Cu2+, Ni2+, Co2+, Co3+) have been employed as the stationary phase physically adsorbed onto the inner fused-silica capillary surface for open-tubular capillary electrochromatography, and applied for the separation of structurally related peptides. Four octapeptides, derivatives of the B23-B30 fragment of the B-chain of human insulin with minor changes in their sequences (presence of lysine or ornithine in position B-29, presence or absence of phenylacetyl protecting group on the amino group of lysine/ornithine or N-terminal amino group of glycine), were studied as model analytes. Separations were performed both in alkaline (pH 9.0) and in acidic (pH 2.25) background electrolytes, and the changes in the migration/retention behaviour of the model set of peptides were investigated with respect to the porphyrin periphery/central metal atom and the charge of the octapeptides modified. The key moment of successful separation of these peptides seems to be the accessibility of functional groups of the peptides to the interaction with the modifiers tested herein.

Affinity electrochromatography of acidic drugs using a liposome-modified capillary

Liposomes can be effectively deposited on the inner surface of a capillary wall by flushing the electrophoretic system with a liposome suspension followed by air-drying of the capillary and removal of the excess of loosely bound liposomes by a 0.1 M NaOH wash. It was demonstrated that capillaries prepared in this way could be used for studies of analyte (drug)-liposome binding. The results were expressed as free binding energy changes [delta(deltaG0)] relatively to an arbitrarily selected standard (acetylsalicylic acid). The results were compared to [delta(deltaG0)] changes obtained from binding studies effected by capillary electrophoresis using a stable liposome plug in a capillary with minimized endoosmotic flow. Good agreement of data reported in the literature (without correction for the residual endoosmotic flow), our previous data obtained in a similar way (however, after the correction for the residual endoosmotic flow) and data obtained by the immobilized liposome affinity electrochromatography reported in this communication was achieved.

Influencing electroosmotic flow and selectivity in open tubular electrochromatography by tetrakis(pentafluorophenyl)porphyrin as capillary wall modifier

A physically adsorbed and covalently bonded porphyrin derivative, 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin, H2TPFPP, has been used as a fused-silica capillary wall modifier in open tubular capillary electrochromatography (OT-CEC), and its influence on the electroosmotic flow (EOF) velocity and on the selectivity of OT-CEC separations of a set of model aromatic carboxylic acids has been tested. Whereas most of the coatings of this category bring about an increase in selectivity with a concomitant slow down of the EOF, H2TPFPP coating, depending on pH of the background electrolyte used, resulted both in decreasing of EOF at pH 8.5 by 5% and in increasing of EOF by 10-43% at pH 6 and 5, respectively. The separation efficiency and the resolution of aromatic carboxylic acids separation in coated capillaries, namely in that one with covalent coating, were better than in the bare fused-silica capillary. The perspectives of H2TPFPP as capillary wall modifier are visualized in introducing well defined electroosmotic properties of materials used for miniaturized separation channels preparation in chip-based electromigration devices.

Open tubular capillary electrochromatography of underivatized amino acids using Rh(III) tetrakis(phenoxyphenyl)porphyrinate as wall modifier

The separation of 17 "common" underivatized amino acids was attempted by open tubular capillary electrochromatography (OT-CEC) in fused-silica capillaries coated with Rh(III) tetrakis(phenoxyphenyl)porphyrinate (Rh(III)TPP(m-OPh)4OAc) using sodium phosphate and Tris-phosphate buffers as background electrolytes (BGEs). The OT-CEC separation of amino acids was compared with that obtained by capillary zone electrophoresis in bare fused-silica capillaries using the same BGEs. The amino acids were not derivatized and the UV-absorption detection was set at 200 nm. Depending on the experimental conditions at least 15 amino acids were separated. The best separations were obtained in a Rh(III)TPP(m-OPh)4OAc-coated capillary in 50 mM Tris-100 mM phosphate buffer at pH 2.25. Separation of the critical triplet Val-Ile-Leu was always at least indicated being better at higher BGE concentrations. Regarding the sensitivity of the method, lower concentration limits of detection (LODs) in the coated capillary were obtained for Thr, Gly, Tyr, and Val; the other amino acids exhibited lower LODs in the uncoated capillary. The separation of acidic amino acids was not achieved.

The separation of biomolecules using capillary electrochromatography

The unique properties of capillary electrochromatography such as high performance, high selectivity, minimum consumption of both reagents and samples, and good compatibility with mass spectrometry make this technique an attractive one for the analysis of biomolecules including peptides, proteins, carbohydrates, nucleosides and nucleotides. Irreversible adsorption between the biomolecules and the charged packing surface leads to a lack of reproducibility and serious peak tailing, so various approaches have been taken to overcome this and to improve the technique for future challenges.