Determination of three phthalate metabolites in human urine using on-line solid-phase extraction-liquid chromatography-tandem mass spectrometry

High-throughput analytical methodology of monoalkyl phthalate esters and the composite risk assessment with their parent phthalate esters in aquatic organisms and seawater

A sensitive, robust, and highly efficient analytical methodology involving solid phase extraction coupled to ultra-high performance liquid chromatography tandem mass spectrometry was successfully established to detect 13 monoalkyl phthalate esters (MPAEs) in aquatic organisms and seawater. After the organisms were preprocessed using enzymatic deconjugation with β-glucuronidase, extraction, purification, and qualitative and quantitative optimization procedures were performed. Under optimal conditions, the limits of detection varied from 0.07 to 0.88 μg/kg (wet weight) and 0.04-1.96 ng/L in organisms and seawater, respectively. Collectively, MPAEs achieved acceptable recovery values (91.0-102.7%) with relative standard deviations less than 10.4% and matrix effects ranging from 0.93 to 1.07 in the above matrix. Furthermore, MPAEs and phthalate esters were detected by the developed methodology and gas chromatography-triple quadrupole tandem mass spectrometer in practical samples, respectively. Mono-n-butyl phthalate and mono-iso-butyl phthalate were the most predominant congeners, accounting for 24.8-35.2% in aquatic organisms and seawater. Comprehensive health and ecological risks were higher after the MPAEs were incorporated than when phthalate esters were considered separately, and greater than their risk threshold. Therefore, the risks caused by substances and their metabolites in multiple media, with analogous structure-activity relationships, should be considered to ensure the safety of aquatic organisms and consumers.

Dummy molecularly imprinted polymer-based solid-phase extraction method for the determination of some phthalate monoesters in urine by gas chromatography-mass spectrometry analysis

A dummy molecularly imprinted polymer-based solid-phase extraction (SPE) sorbent was used for the selective extraction of some phthalate monoesters, monoethyl phthalate (MEP), monobutyl phthalate (MnBP) and mono-(2-ethylhexyl) phthalate (MEHP) in urine prior to gas-chromatography-mass spectrometry (GC-MS) analysis. Diethyl phthalate (DEP), a phthalate ester, was successfully used as a dummy template to prepare selective sorbent for MEP, MnBP, and MEHP extraction. DEP-imprinted poly(ethylene glycol dimethacrylate N-methacryloyl-l-tryptophan methyl ester) (DPEMT) microbeads were synthesized by suspension polymerization and characterized by Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and Brunauer Emmet Teller (BET) analysis. The critical parameters (i.e., pH, sorbent amount, ionic strength, sample volume, elution solvent) affecting the extraction performance of the DPEMT-SPE sorbent were optimized. Under optimum conditions, good linearities were obtained in the concentration range of 4 to 60 ng/mL with determination coefficients (R2) of greater than 0.9959. The developed SPE method provided low limits of detection (LOD) of 0.05-1.20 ng/mL and limits of quantification (LOQ) of 0.18-4.01 ng/mL with relative standard deviations (RSDs) of less than 8.95 % for intra- and inter-day analyses. The proposed SPE method was used to analyze phthalate monoesters in spiked urine samples, and recoveries of 97.45-109.26 % were obtained. DPEMT-SPE sorbent was reused for 15 times without any losses of performance. Consequently, a highly selective and sensitive SPE method based on a dummy molecularly imprinted polymer combined with GC-MS was successfully developed to monitor human phthalate exposure via urine samples.

Recent Advances in Spectroscopy Technology for Trace Analysis of Persistent Organic Pollutants

Persistent organic pollutants (POPs) have attracted significant attention because of their bioaccumulation, persistence, and toxicity. As anthropogenic products, POPs mainly contain polychlorinated biphenyls (PCBs), organochlorine pesticides (OPs), and polycyclic aromatic hydrocarbons (PAHs), and they pose a great threat to human health and the environment. To deal with these toxic contaminants, many different kinds of strategies for sensitively detecting POPs have been developed, such as high performance liquid chromatography (HPLC), surface enhanced Raman spectroscopy (SERS), and fluorescence. This paper mainly summarized the achievements of spectroscopy technologies, which generally consist of SERS, surface plasmon resonance (SPR), and fluorescence, in the detection of low-concentration POPs in different matrices. In addition, a retrospective summary is made on several critical considerations, such as sensitivity, specificity and reproducibility of these spectroscopy technologies in practical applications. Finally, some current challenges and future outlooks for these spectroscopy technologies are provided in regards to environmental analysis.

A highly hydrolytically stable lanthanide organic framework as a sensitive luminescent probe for DBP and chlorpyrifos detection

A series of isostructural 3D Ln-MOFs with exceptional hydrolytic stability were synthesized. The Tb³⁺ compound showed excellent sensing ability towards DBP and chlorpyrifos.

Development and validation of a HPLC method for the determination of benzo(a)pyrene in human breast milk

A simple analytical procedure was developed for the quantitation of benzo(a)pyrene in human breast milk using solid phase extraction (SPE) combined with high performance liquid chromatography. Before the chromatographic process, SPE, including C18 functional groups in silicagel cartridges, was conducted for sample preparation. A C18 column (100×4.6 mm id, 3 μm particle size) was used with acetonitrile:water (80:20) as the mobile phase at a flow rate 1mL/min at 30°C. Fluorimetric detection was performed for excitation and emission at 290 and 406 nm, respectively. It was observed that the calibration curve was linear over the range of 0.5-80 ng/mL. The limit of detection and limit of quantitation were found to be 0.5 and 1.07 ng/mL, respectively. Intraday and interday relative standard deviation values were less than 5.15%. Moreover, the newly developed method provides a fast, simple, cost effective, and sensitive assay to detect an important carcinogen substance, benzo(a)pyrene, in human breast milk.

Analytical method for urinary metabolites as biomarkers for monitoring exposure to phthalates by gas chromatography/mass spectrometry

Phthalates, widely used as plasticizers, have been detected in indoor air, but there have been few reports on methods of analyzing urinary metabolites as biomarkers to monitor exposure to di-n-pentyl phthalate or di-n-hexyl phthalate. Presented here is a cost-effective and sensitive analytical method for the determination of urinary metabolites of phthalates containing these two compounds. Nine urinary phthalate metabolites were enzymatically hydrolyzed and extracted with toluene: monomethyl phthalate, monoethyl phthalate, monoisobutyl phthalate, mono-n-butyl phthalate, mono-n-pentyl phthalate, mono-n-hexyl phthalate, monocyclohexyl phthalate, monobenzyl phthalate and mono(2-ethyl-5-carboxypentyl) phthalate. After transformation to their tert-butyldimethylsilyl derivatives, they were analyzed by gas chromatography/mass spectrometry in the electron impact ionization mode. The calibration curves for the metabolites were linear at urinary concentrations of up to 30 μg/L, showing that they could be determined accurately and precisely (detection limits 0.1-0.4 μg/L, quantification limits 0.3-1.3 μg/L). The urine samples collected could be stored for up to 1 month at -20°C. The proposed analytical method was used to examine urine samples from seven healthy volunteers. This method should be useful for monitoring phthalate exposure in the general population.

Determination of phthalate esters in distillates by ultrasound-vortex-assisted dispersive liquid-liquid micro-extraction (USVADLLME) coupled with gas chromatography/mass spectrometry

A method for the extraction of phthalate esters (PAEs) by Ultrasound-Vortex-Assisted Dispersive Liquid-Liquid Micro-Extraction (USVADLLME) approach was optimised and applied for the first time to a historical series of brandies. These contaminants are widely spread in the environment as a consequence of about half century of use in different fields of applications. The concern about these substances and the recent legal restrictions of China in distillates import need a quick and sensitive method for their quantification. The proposed method, moreover, is environmentally oriented due to the disposal of micro-quantities of solvent required. In fact, sub-ppm-limits of detection were achieved with a solvent volume as low as 160μL. The analysed samples were within the legal limits, except for some very ancient brandies whose contamination was probably due to a PAEs concentration effect as a consequence of long ageing and for the use of plastic pipelines no more operative.

Fast analysis of phthalates in freeze-dried baby foods by ultrasound-vortex-assisted liquid-liquid microextraction coupled with gas chromatography-ion trap/mass spectrometry

This paper is focused on the determination of phthalates (PAEs), compounds "plausibly" endocrine disruptors, in baby food products by means of a method based on ultrasound-vortex-assisted liquid-liquid microextraction coupled with GC-IT/MS (UVALLME-GC-IT/MS). Particularly, the whole procedure allows the determination of six phthalates such as DMP, DEP, DBP, iBcEP, BBP and DEHP. After dissolution of 0.1g product sample and addition of anthracene as Internal Standard, 250μL of n-heptane are used as extraction solvent. The solution, held for 5min on the vortex mixer and for 6min in an ultrasonic bath at 100W for favoring the solvent dispersion and consequently the analyte extraction, is centrifuged at 4000rpm for 30min. About 100μL of heptane are recovered and 1μL is injected into the GC-IT/MS. All the analytical parameters investigated are deeply discussed: under the best conditions, the percentage recoveries range between 96.2 and 109.2% with an RSD ≤10.5% whereas the Limit of Detections (LODs) and the Limit of Quantifications (LOQs) are below 11 and 20ngg^-1, respectively, for all the PAEs except for iBcEP (23 and 43ngg^-1, respectively). The linear dynamic range of this procedure is between 10 and 5000ngg^-1 with R² ≥0.92. The method has been applied to real commercial freeze-dried samples (chicken and turkey meats) available on the Italian pharmaceutical market: three PAEs were preliminary identified, i.e. DEP (14ngg^-1), DBP (11ngg^-1) and DEHP (64ngg^-1).

[Pharmaceutical analysis of chemicals related with daily life products for safe and secure]

An association between exposure to trace hazardous chemicals such as endocrine disrupting chemicals and an increased incidence of human endocrine disease might be continued to study. The accurate and sensitive analytical methods for determination of various chemicals in human biospecimen such as urine, blood and breast milk have been studied by techniques including chromatography. In order to obtain the safe and secure life, the pharmaceutical analytical approaches might be applicable with the hopes of realizing scientific risk assessment of the chemicals derived from daily life products as regulatory sciences.

Detection of phthalates in using ultra performance liquid chromatography-electrospray ionizationtandem mass spectrometry MRM mode- 'ghost peaks' and measurement methodology

In the analysis of phthalates, specifically diethyl phthalate (DEP), dibutyl phthalate (DBP), butylbenzyl phthalate (BBP), and diethylhexyl phthalate (DEHP) using ultra performance liquid chromatography-electrospray ionization tandem mass spectrometry (UPLC-ESI-MS/MS), 'ghost peaks' appeared when a gradient liquid chromatography elution mode was employed. A systematic diagnostic analytical protocol was designed to show that the source of the persistent 'ghost peaks', which jeopardized a quantitative analysis of these endocrine disruptors was the mobile phase. A trace amount of DEHP in the mobile phase, either from ultrapure water or organic solvent, was responsible for the observed phenomenon. In contrast to gradient elution, isocratic chromatographic elution mode (ICEM) was found to be free of the problem at the expense of less effective separation of DBP and BBP. Thus, a detection method for analyzing the phthalates is proposed based on ICEM and the multiple reaction monitoring (MRM) mode with multi-channel detection in the UPLC-MS/MS. In the method development, tap water matrix effects were examined and a solution for detection intensity suppression in the analysis of tap water samples was proposed. An addition of methanol into tap water samples could basically relieve the signal detection suppression by the real water matrix. This provides a detection method of these trace environmental pollutants with a linear range between 0.5 to 50 ng mL-1 and detection limits (LODs) (0.32-0.54 ng mL-1) without need of sample pre-concentration. This is a much simpler and faster method than gas chromatography-electron capture detection (GC-ECD) and gas chromatography-mass spectrometry (GC-MS), with comparable detection sensitivity.

Determination of phthalate esters in water samples by ionic liquid cold-induced aggregation dispersive liquid-liquid microextraction coupled with high-performance liquid chromatography

A novel method, termed ionic liquid cold-induced aggregation dispersive liquid-liquid microextraction (IL-CIA-DLLME), combined with high-performance liquid chromatography (HPLC) was developed for the determination of three phthalate esters in water samples. Several important parameters influencing the IL-CIA-DLLME extraction efficiency, such as the type of extraction and disperser solvent, the volume of extraction and disperser solvent, temperature, extraction time and salt effect, were investigated. Under optimal extraction conditions, the enrichment factors and extraction recoveries ranged from 174 to 212 and 69.9 to 84.8%, respectively. Excellent linearity with coefficients of correlation from 0.9968 to 0.9994 was observed in the concentration range of 2-100 ng mL(-1). The repeatability of the proposed method expressed as relative standard deviations ranged from 2.2 to 3.7% (n=5). Limits of detection were between 0.68 and 1.36 ng mL(-1). Good relative recoveries for phthalate esters in tap, bottled mineral and river water samples were obtained in the ranges of 91.5-98.1%, 92.4-99.2% and 90.1-96.8%, respectively. Thus, the proposed method has excellent potential for the determination of phthalate esters in the environmental field.

Structural characterisation of degradation products formed upon di-n-butyl phthalate radiolysis by high-performance liquid chromatography electrospray tandem mass spectrometry

Structural characterisation of 15 degradation products, formed upon di-n-butyl phthalate (DBP) radiolysis, has been achieved using a high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) coupling. The dissociation behaviour of protonated DBP was first established to be further used to characterise structural deviation in the degradation products. Based on accurate mass measurements, compounds shown by HPLC-MS analysis were all found to be DBP oxidation products, amongst which various sets of isomers could be distinguished. Collision-induced dissociation experiments performed on each electrosprayed molecule first allowed unambiguous definition of the location of the additional oxygen atoms; that is, in the alkyl branch or on the aromatic ring. Although location of the oxygen atom in the alkyl branches could not always be precisely determined, relative abundances of some product ions allowed oxygenated functions to be identified.

Analysis of di-n-butyl phthalate and other organic pollutants in Chongqing women undergoing parturition

In this study, 40 healthy women from Chongqing undergoing parturition were recruited and samples of venous blood, umbilical cord blood, breast milk and urine were collected for analysis of organic pollutants by GC/MS. A total of 292 different organic pollutants were detected, including 156 in venous blood, 139 in umbilical cord blood, 176 in breast milk and 138 in urine. Nine different PAEs were detectable in the samples: di-n-butyl phthalate (DBP), bis(2-methylpropyl) phthalate, butyl-8-methyl-nonyl phthalate, di-ethyl phthalate, butyl-2-methylpropyl phthalate, butyloctyl phthalate, di-dodecyl phthalate, di-isodecyl phthalate, and di-tridecyl phthalate. DBP was one of the chemicals detected at the highest frequency (48.82%). DBP concentrations were 84.75+/-33.52, 52.23+/-32.50, 57.78+/-35.42 and 24.93+/-18.67 microg/l in venous blood, umbilical cord blood, breast milk and urine, respectively. This study represents the first investigation of organic pollutants in a Chongqing population.

Measurement of drinking water contaminants by solid phase microextraction initially quantified in source water samples by the USGS

Two adsorbent solid phase microextraction (SPME) fibers, 70 microm Carbowax divinylbenzene (CW/DVB) and 65 microm polydimethylsiloxane divinylbenzene (PDMS/DVB), were selected for the analysis of several target analytes (phenols, phosphates, phthalates, polycyclic aromatic hydrocarbons, and chlorinated pesticides) identified by the USGS in surface waters. Detection limits for standards ranged from 0.1 to 1 ng/mL for the CW/ DVB fiber and 0.1 to 2 ng/mL for the PDMS/DVB fiber for 20 of the analytes. The remaining analytes were not extracted because their polarity precluded their partition to the solid phase of the SPMEfiber. Groundwater and treated water samples collected from wells in northern New Jersey were then sampled for the USGS analytes by the SPME method as well as a modified version of EPA 525.5 using C-18 bonded solid phase extraction columns. Nine of the USGS analytes-bisphenol A, bis(2-ethylhexyl) phthalate, butylated hydroxytoluene, butlyated hydroxyanisole, diethyltoulamide, diethyl phthalate, bis(2-ethylhexyl) adipate, 1,4-dichlorobenzene, and triphenyl phosphate-were detected in groundwater samples using the CW/ DVB fiber.

Potential sources of background contaminants in solid phase extraction and microextraction

A study to identify the sources of background contamination from SPE, using a C-18 sorbent, and solid-phase microextraction (SPME), using a 70 microm carbowax/divinylbenzene (CW/DVB) fiber, was carried out. To determine the source of contamination, each material used in the procedure was isolated and examined for their contribution. The solid-phase column components examined were: sorbent material and frits, column housings and each solvent used to elute analytes off the column. The components examined in the SPME procedure were: SPME fiber, SPME vials, water (HPLC grade), and salt (sodium chloride) used to increase the ionic strength. The majority of the background contaminants from SPE were found to be from the SPE sorbent material and frits. The class of contaminants extracted during a blank extraction were phthalates and other plasticizers used during the manufacturing process. All had blank levels corresponding to measured concentrations below 2 ng/ mL, except for undecane, which had a concentration of 5.4 ng/mL. The most prevalent contaminants in the SPME blank procedure are 1,9-nonanediol, a mixture of phthalates and highly bis-substituted phenols. All the concentrations were below 2 ng/mL, with the exception of bis (2-ethylhexyl) phthalate, which had concentrations ranging from 5 to 20 ng/mL.

Automated on-line column-switching HPLC-MS/MS method with peak focusing for the determination of nine environmental phenols in urine

We developed a method using isotope dilution on-line solid-phase extraction (SPE) coupled to high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) for the determination in urine of nine environmental phenolic compounds: Bisphenol A; 4-tert-octylphenol; o-phenylphenol; 2,4-dichlorophenol; 2,5-dichlorophenol; 2,4,5-trichlorophenol; 2,4,6-trichlorophenol; benzophenone-3 (2-hydroxy-4-metoxybenzophenone); and triclosan (2,4,4'-trichloro-2'-hydroxyphenyl ether). A unique fully automated column-switching system, constructed using 1 autosampler, 2 HPLC pumps, and a 10-port switching valve, was designed to allow for concurrent SPE-HPLC operation with peak focusing. The phenols present in 100 microL of urine were retained and concentrated on a C18 reversed-phase size-exclusion SPE column. Then, the phenols were "back-eluted" from the SPE column and diluted through a mixing Tee before being separated from other urine matrix components using a pair of monolithic HPLC columns. The phenols were detected by negative ion-atmospheric pressure chemical ionization-MS/MS. The efficient preconcentration of the phenols by the SPE column, analyte peak focusing by the dilution, and minimal ion suppression in the LC/MS interface by the buffer-free mobile phases resulted in limits of detection as low as 0.1-0.4 ng/mL for most analytes. The method was validated on spiked pooled urine samples and on urine samples from 30 adults with no known occupational exposure to environmental phenols. The method can be used for quick and accurate analysis of large numbers of samples in epidemiologic studies for assessing the prevalence of human exposure to environmental phenols.

Integrating biomonitoring exposure data into the risk assessment process: phthalates [diethyl phthalate and di(2-ethylhexyl) phthalate] as a case study

The probability of nonoccupational exposure to phthalates is high given their use in a vast range of consumables, including personal care products (e.g., perfumes, lotions, cosmetics), paints, industrial plastics, and certain medical devices and pharmaceuticals. Phthalates are of high interest because of their potential for human exposure and because animal toxicity studies suggest that some phthalates affect male reproductive development apparently via inhibition of androgen biosynthesis. In humans, phthalates are rapidly metabolized to their monoesters, which can be further transformed to oxidative products, conjugated, and eliminated. Phthalate metabolites have been used as biomarkers of exposure. Using urinary phthalate metabolite concentrations allows accurate assessments of human exposure because these concentrations represent an integrative measure of exposure to phthalates from multiple sources and routes. However, the health significance of this exposure is unknown. To link biomarker measurements to exposure, internal dose, or health outcome, additional information (e.g., toxicokinetics, inter- and intraindividual differences) is needed. We present a case study using diethyl phthalate and di(2-ethylhexyl) phthalate as examples to illustrate scientific approaches and their limitations, identify data gaps, and outline research needs for using biomonitoring data in the context of human health risk assessment, with an emphasis on exposure and dose. Although the vast and growing literature on phthalates research could not be covered comprehensively in this article, we made every attempt to include the most relevant publications as of the end of 2005.

Monitoring phthalate exposure in humans

The dialkyl- or alkyl/aryl esters of 1,2-benzenedicarboxylic acid, commonly known as phthalates, are high-production-volume synthetic chemicals and ubiquitous environmental contaminants because of their use in plastics and other common consumer products. Di-(2-ethylhexyl) phthalate (DEHP) is the most abundant phthalate in the environment. Humans are exposed to these compounds through ingestion, inhalation, and dermal exposure for their whole lifetime, since the intrauterine life. Public and scientific concern has increased in recent years about the potential health risks associated with exposure to phthalates. The main focus has moved away from the hepatotoxic effects to the endocrine disrupting potency of these chemicals. To date, although the consistent toxicologic data on phthalates is suggestive, information on sources and pathways of human exposure to phthalates is limited. Recently, exposure to phthalates has been assessed by analyzing urine for their metabolites. This approach is contrary to the determination of the parent phthalates in air, water and foodstuff and not subject to contamination. Furthermore, these metabolites and the parent phthalates are considered the toxic species. However, accurate methods and models for measuring the amount of phthalates absorbed by the various pathways of exposure have to be developed. In fact, a frequent biological monitoring of phthalates in body fluids and tissues would be highly advisable, both in helping physicians to perform health risk assessments for exposure in the general population and in guiding governments to provide regulations concerning the maximum allowed concentrations in the environment, plasticized products, medications and medical equipment.

Separation and determination of phthalates by micellar electrokinetic chromatography

A method has been developed for the separation and determination of dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), di-(2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DnOP) by micellar electrokinetic chromatography (MEKC). The baseline separation of phthalates was achieved by using a buffer of 100 mM sodium cholate, 50 mM borate and 15% methanol (pH 8.5). The optimized MEKC method was used to quantify the concentrations of phthalates in 11 soil samples from different regions of China. The contents of DEP, DBP and DEHP in soils were ranged 0-0.42, 0-1.43, and 0.24-2.35 mg/kg, respectively, and no DMP and DnOP was detected. The limits of detection for DMP, DEP, DBP, DEHP, and DnOP were found to be 0.050, 0.051, 0.052, 0.054, and 0.063 mg/kg, respectively. The results obtained by the MEKC method were compared with those obtained by gas chromatography with flame ionization detector (GC-FID), and a good agreement was achieved.

Automated on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry method for the determination of ochratoxin A in wine and beer

An automated on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry (SPE-LC-ESI-MS/MS) method was developed for the determination of ochratoxin A (OTA) in alcoholic beverages. Mean recoveries for wine and beer were, respectively, 75 and 82%. Detection was achieved in negative ionization with a Q TRAP mass spectrometer operating in multiple-reaction monitoring (MRM) mode or enhanced product ion (EPI) mode, using the third quadrupole as linear ion trap. The MRM mode turned out to be more sensitive; the method allowed accurate determination of OTA in the range of 0.01-25 ng mL(-1) using external calibration. Within-day and between-day relative standard deviation percentages were <6.2 and <9.1%, respectively. In EPI mode, fragmentation spectra at the limit of quantification (0.03 ng mL(-1)) and good linearity could be obtained. Application of the method (MRM mode) to the analysis of several wine and beer samples purchased in local stores revealed OTA levels in the ranges of 0.03-1.44 ng mL(-1) for wines and 0.02-0.14 ng mL(-1) for beers.

Determination of 16 Phthalate Metabolites in Urine Using Automated Sample Preparation and On-line Preconcentration/High-Performance Liquid Chromatography/Tandem Mass Spectrometry

We developed an on-line solid-phase extraction (SPE) method, coupled with isotope dilution high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) and with automated sample preparation, to simultaneously quantify 16 phthalate metabolites in human urine. The method requires a silica-based monolithic column for the initial preconcentration of the phthalate metabolites from the urine and a silica-based conventional analytical column for the chromatographic separation of the analytes of interest. It uses small amounts of urine (100 microL), is sensitive (limits of detection range from 0.11 to 0.90 ng/mL), accurate (spiked recoveries are approximately 100%), and precise (the inter- and intraday coefficients of variation are <10%). The method is not labor intensive, and, because pretreatment of the urine samples was performed automatically using an HPLC autosampler, involves minimal sample handling, thus minimizing exposure to hazardous chemicals. The method was validated on spiked, pooled urine samples and on urine samples from 43 adults with no known exposure to phthalates. The high sensitivity and high throughput (HPLC run time, including the preconcentration step, is 27 min) of this analytical method combined with the ease of use and effective automated sample preparation procedure make it suitable for large epidemiological studies to evaluate the prevalence of human exposure to phthalates.