Analysis of secretory immunoglobulin A in human saliva by laser-induced fluorescence capillary electrophoresis

Capillary electrophoresis-based immunoassay and aptamer assay: A review

Over the last two decades, the group of techniques called affinity probe CE has been widely used for the detection and the determination of several types of biomolecules with high sensitivity. These techniques combine the low sample consumption and high separation power of CE with the selectivity of the probe to the target molecule. The assays can be defined according to the type of probe used: CE immunoassays, with an antibody as the probe, or aptamer-based CE, with an aptamer as the probe. Immunoassays are generally divided into homogeneous and heterogeneous groups, and homogeneous variant can be further performed in competitive or noncompetitive formats. Interacting partners are free in solution at homogeneous assay, as opposed to heterogeneous analyses, where one of them is immobilized onto a solid support. Highly sensitive fluorescence, chemiluminescence or electrochemical detections were typically used in this type of study. The use of the aptamers as probes has several advantages over antibodies such as shorter generation time, higher thermal stability, lower price, and lower variability. The aptamer-based CE technique was in practice utilized for the determination of proteins in biological fluids and environmentally or clinically important small molecules. Both techniques were also transferred to microchip. This review is focused on theoretical principles of these techniques and a summary of their applications in research.

Research Progress of Near-Infrared Fluorescence Immunoassay

Near-infrared fluorescence probes (NIFPs) have been widely used in immunoassay, bio-imaging and medical diagnosis. We review the basic principles of near-infrared fluorescence and near-infrared detection technology, and summarize structures, properties and characteristics of NIFPs (i.e., cyanines, xanthenes fluorescent dyes, phthalocyanines, porphyrin derivates, single-walled carbon nanotubes (SWCNTs), quantum dots and rare earth compounds). We next analyze applications of NIFPs in immunoassays, and prospect the application potential of lateral flow assay (LFA) in rapid detection of pathogens. At present, our team intends to establish a new platform that has highly sensitive NIFPs combined with portable and simple immunochromatographic test strips (ICTSs) for rapid detection of food-borne viruses. This will provide technical support for rapid detection on the port.

The effects of storage time and temperature on recovery of salivary secretory immunoglobulin A

OBJECTIVES

This study aimed to determine the optimal storage temperature to minimise degradation of salivary s-IgA for field-based surveillance applications in resource-limited settings.

METHODS

Saliva samples from 40 Zambian adults were stored at +25°C, +4°C, -20°C, and -80°C and each tested by ELISA for salivary s-IgA concentration at 0, 1, 2, 7, and 15 days. Differences were determined among concentrations over time and temperature compared with baseline values. Kruskal-Wallis tests were applied to analyse variance. Single and multivariate regression analyses estimated the influence of storage time and temperature on recoverable s-IgA.

RESULTS

Results revealed a statistically significant decrease in salivary s-IgA concentration as storage time increased and as temperature decreased. Degradation during storage time was most pronounced at lower temperatures.

CONCLUSIONS

s-IgA is stable at ambient temperatures in Zambia for at least 15 days, suggesting no need for cold chain handling before analysis in field-based surveillance applications.

Clinical applications of capillary electrophoresis based immunoassays

Immunoassays have long been an important set of tools in clinical laboratories for the detection, diagnosis, and treatment of disease. Over the last two decades, there has been growing interest in utilizing CE as a means for conducting immunoassays with clinical samples. The resulting method is known as a CE immunoassay. This approach makes use of the selective and strong binding of antibodies for their targets, as is employed in a traditional immunoassay, and combines this with the speed, efficiency, and small sample requirements of CE. This review discusses the variety of ways in which CE immunoassays have been employed with clinical samples. An overview of the formats and detection modes that have been employed in these applications is first presented. A more detailed discussion is then given on the type of clinical targets and samples that have been measured or studied by using CE immunoassays. Particular attention is given to the use of this method in the fields of endocrinology, pharmaceutical measurements, protein and peptide analysis, immunology, infectious disease detection, and oncology. Representative applications in each of these areas are described, with these examples involving work with both traditional and microanalytical CE systems.

Simultaneous capillary electrophoresis competitive immunoassay for insulin, glucagon, and islet amyloid polypeptide secretion from mouse islets of Langerhans

A capillary electrophoresis competitive immunoassay was developed for the simultaneous quantitation of insulin, glucagon, and islet amyloid polypeptide (IAPP) secretion from islets of Langerhans. Separation buffers and conditions were optimized for the resolution of fluorescein isothiocyanate (FITC)-labeled glucagon and IAPP immunoassay reagents, which were excited with the 488 nm line of an Ar(+) laser and detected at 520 nm with a photomultiplier tube (PMT). Cy5-labeled insulin immunoassay reagents were excited by a 635 nm laser diode module and detected at 700 nm with a separate PMT. Optimum resolution was achieved with a 20mM carbonate separation buffer at pH 9.0 using a 20 cm effective separation length with an electric field of 500 V/cm. Limits of detection for insulin, glucagon, and IAPP were 2, 3, and 3 nM, respectively. This method was used to monitor the simultaneous secretion of these peptides from as few as 14 islets after incubation in 4, 11, and 20 mM glucose for 6h. For insulin and IAPP, a statistically significant increase in secretion levels was observed, while glucagon levels were significantly reduced in the 4 and 11 mM glucose conditions. To further demonstrate the utility of the assay, the Ca(2+)-dependent secretion of these peptides was demonstrated which agreed with published reports. The ability to examine the secretion of multiple peptides may allow for the determination of regulation of secretory processes within islets of Langerhans.

Photoactive hybrid nanomaterials: indocyanine immobilized in mesoporous MCM-41 for "in-cell" bioimaging

Mesoporous silica nanoparticles are being explored as versatile tools for various biomedical and biotechnological applications including disease diagnosis, drug delivery, and intracellular imaging. In this paper, the synthesis and characterization of a fluorescent hybrid mesoporous silica nanomaterial, which is noncytotoxic and shows great potential for "in-cell" bioimaging applications, will be described. The hybrid mesoporous material has been obtained by confining highly fluorescent organic dyes, belonging to the indocyanine family, within the channels of mesoporous MCM-41. To explore the dispersion of the dye inside the mesoporous channels and the formation of dye aggregates, several hybrid samples with increasing dye/MCM-41 loading (up to 100 mg/g) were prepared. A uniform distribution of monomeric 1,1'-diethyl-3,3,3',3'-tetramethylindocarbocyanine iodide has been achieved at low dye loading (1 mg/g), as evidenced by photoluminescence spectra and lifetime, while a progressive formation of J-aggregates is induced by an increase in the dye loading. To elucidate the properties of the dye immobilized in mesoporous MCM-41, a detailed physical chemical characterization by structural (X-ray diffraction), volumetric and optical (Fourier transform infrared, diffuse-reflectance UV-vis and photoluminescence) techniques has been performed. By ultrasonication of the bulk material, nanoparticles of 2-20 nm diameter were obtained. Biocompatibility, endocytic uptake, and intracellular compartmentalization of such fluorescent nanoparticles were investigated in mammalian cultured cells.

Capillary electrophoresis-based immunoassays: principles and quantitative applications

The use of CE as a tool to conduct immunoassays has been an area of increasing interest over the last decade. This approach combines the efficiency, small sample requirements, and relatively high speed of CE with the selectivity of antibodies as binding agents. This review examines the various assay formats and detection modes that have been reported for these assays, along with some representative applications. Most CE immunoassays in the past have employed homogeneous methods in which the sample and reagents are allowed to react in solution. These homogeneous methods have been conducted as both competitive binding immunoassays and as noncompetitive binding immunoassays. Fluorescent labels are most commonly used for detection in these assays, but enzyme labels have also been utilized for such work. Some additional work has been performed in CE immunoassays with heterogeneous methods in which either antibodies or an analog of the analyte is immobilized to a solid support. These heterogeneous methods can be used for the selective isolation of analytes prior to their separation by CE or to remove a given species from a sample/reagent mixture prior to analysis by CE. These CE immunoassays can be used with a variety of detection modes, such as fluorescence, UV/Vis absorbance, chemiluminescence, electrochemical measurements, MS, and surface plasmon resonance.

Determination of amino acids in saliva using capillary electrophoresis with fluorimetric detection

In the present study a sensitive method for the quantification of main free amino acids in saliva using capillary electrophoresis with laser induced fluorescence detection was developed. As background electrolyte 20 mM borate buffer pH 9.5 was used. Amino acids were separated after derivatization with fluorescein isothiocyanate (FITC) and the conditions for derivatization were optimized. The main amino acids occurring in saliva (Pro, Ser, Gly and Glu) were separated in less than 7 min. The parameters of validation such as linearity of response, precision and detection limits were determined. The detection limits were obtained in the range from 0.1 to 2.4 nM. The developed method was employed for determination of amino acids in real saliva samples.

Large-scale identification of proteins in human salivary proteome by liquid chromatography/mass spectrometry and two-dimensional gel electrophoresis-mass spectrometry

Human saliva contains a large number of proteins and peptides (salivary proteome) that help maintain homeostasis in the oral cavity. Global analysis of human salivary proteome is important for understanding oral health and disease pathogenesis. In this study, large-scale identification of salivary proteins was demonstrated by using shotgun proteomics and two-dimensinal gel electrophoresis-mass spectrometry (2-DE-MS). For the shotgun approach, whole saliva proteins were prefractionated according to molecular weight. The smallest fraction, presumably containing salivary peptides, was directly separated by capillary liquid chromatography (LC). However, the large protein fractions were digested into peptides for subsequent LC separation. Separated peptides were analyzed by on-line electrospray tandem mass spectrometry (MS/MS) using a quadrupole-time of flight mass spectrometer, and the obtained spectra were automatically processed to search human protein sequence database for protein identification. Additionally, 2-DE was used to map out the proteins in whole saliva. Protein spots 105 in number were excised and in-gel digested; and the resulting peptide fragments were measured by matrix-assisted laser desorption/ionization-mass spectrometry and sequenced by LC-MS/MS for protein identification. In total, we cataloged 309 proteins from human whole saliva by using these two proteomic approaches.