Advances of Particles/Cells Magnetic Manipulation in Microfluidic Chips

Single neurons on microelectrode array chip: manipulation and analyses

Chips-based platforms intended for single-cell manipulation are considered powerful tools to analyze intercellular interactions and cellular functions. Although the conventional cell co-culture models could investigate cell communication to some extent, the role of a single cell requires further analysis. In this study, a precise intercellular interaction model was built using a microelectrode array [microelectrode array (MEA)]-based and dielectrophoresis-driven single-cell manipulation chip. The integrated platform enabled precise manipulation of single cells, which were either trapped on or transferred between electrodes. Each electrode was controlled independently to record the corresponding cellular electrophysiology. Multiple parameters were explored to investigate their effects on cell manipulation including the diameter and depth of microwells, the geometry of cells, and the voltage amplitude of the control signal. Under the optimized microenvironment, the chip was further evaluated using 293T and neural cells to investigate the influence of electric field on cells. An examination of the inappropriate use of electric fields on cells revealed the occurrence of oncosis. In the end of the study, electrophysiology of single neurons and network of neurons, both differentiated from human induced pluripotent stem cells (iPSC), was recorded and compared to demonstrate the functionality of the chip. The obtained preliminary results extended the nature growing model to the controllable level, satisfying the expectation of introducing more elaborated intercellular interaction models.

Magnetic Bead Manipulation in Microfluidic Chips for Biological Application

Magnetic beads manipulation in microfluidic chips is a promising research field for biological application, especially in the detection of biological targets. In this review, we intend to present a thorough and in-depth overview of recent magnetic beads manipulation in microfluidic chips and its biological application. First, we introduce the mechanism of magnetic manipulation in microfluidic chip, including force analysis, particle properties, and surface modification. Then, we compare some existing methods of magnetic manipulation in microfluidic chip and list their biological application. Besides, the suggestions and outlook for future developments in the magnetic manipulation system are also discussed and summarized.

Formation of a 3D Particle Array Actuated by Ultrasonic Traveling Waves in a Regular Polygon Resonator

Acoustic radiation forces have been extensively studied regarding static particles, cell patterning, and dynamic transportation. Compared with standing wave manipulation, traveling wave manipulation can be more easily modulated in real time and has no matching requirement between the size of the resonant cavity and the sound frequency. In this work, we present an efficient, multi-layer microparticle pattern technique in a 3D polygon cavity with a traveling bulk acoustic wave. There are two types of excitation modes: the interval excitation mode (IEM) and the adjacent excitation mode (AEM). We conducted theoretical and simulation analyses, and our results show that both of these modes can form particle arrays in the resonant cavity, which is in accordance with the experimental results. The array spacings in the IEM and AEM were about 0.8 mm and 1.3 mm, respectively, while the acoustic frequency was 1MHz. Double-layer particle patterns were arrayed by a double in the resonant cavity. The spacing between the two layers was set at 3.0 mm. The line spacings were about 0.4 mm in both layers. The line width was 0.2 mm, which was larger than the single layer. The results show that ultrasonic traveling waves are a feasible method to manipulate particles and cells that form 3D patterns in particle-fluid flows.

On-Chip Arbitrary Manipulation of Single Particles by Acoustic Resonator Array

Effective and arbitrary manipulation of particles in liquid has attracted substantial interest. Acoustic tweezers, a new and promising tool, exhibit high biocompatibility, universality, and precision but lack arbitrariness. In this work, we report a gigahertz (GHz) bulk acoustic streaming tweezer (AST)-based micro-manipulation platform capable of efficiently translating acoustic energy to fluid kinetic energy, creating a controllable, quick-response, and stable flow field and precisely, arbitrarily, and universally manipulating a single particle to move like a microrobot. Through controlling the radio frequency signals applied on these resonators, the intensity and direction of the acoustic streaming flow can be quickly and arbitrarily adjusted. Consequently, the particle dispersed at the bottom can be arbitrarily and steadily driven along the predesigned route to the target position by the acoustic streaming drag force (ASF). We utilized four resonators cooperated as a work group to manipulate single SiO₂ particles to complete nearly uniform linear motions and U-shaped motions, as well as playing billiards and exploring a maze, demonstrating the enormous potential of this GHz AST-based single-particle manipulation platform for separation, assembly, sensing, enriching, transporting, and so forth.

New method for arbuscular mycorrhizal fungus spore separation using a microfluidic device based on manual temporary flow diversion

Arbuscular mycorrhizal fungi are beneficial components often included in biofertilizers. Studies of the biology and utilization of these fungi are key to their successful use in the biofertilizer industry. The acquisition of isolated spores is a required step in these studies; however, spore quality control and spore separation are bottlenecks. Filtered and centrifuged spores have to be hand-picked under a microscope. The conventional procedure is skill-demanding, labor-intensive, and time-consuming. Here, we developed a microfluidic device to aid manual separation of spores from a filtered and centrifuged suspension. The device is a single spore streamer equipped with a manual temporary flow diversion (MTFD) mechanism to select single spores. Users can press a switch to generate MTFD when the spore arrives at the selection site. The targeted spore flows in a stream to the collection chamber via temporary cross flow. Using the device, spore purity, the percentage of spore numbers against the total number of particles counted in the collecting chamber reached 96.62% (median, n = 10) which is greater than the spore purity obtained from the conventional method (88.89% (median, n = 10)).

Digital image colorimetry detection of carbaryl in food samples based on liquid phase microextraction coupled with a microfluidic thread-based analytical device

This research used a digital image colorimetry (DIC) method to detect carbaryl in food samples using effervescence-assisted liquid phase microextraction based on solidification of switchable hydrophilicity solvent combined with a microfluidic thread-based analytical device (EA-LPME-SSHS-μTAD). 1-naphthol, the hydrolysate of carbaryl, was extracted into octanoic acid by the adjustment of pH values of the sample solution and separated through solidification in an ice bath. Then 1-naphthol contained in the extracted solution was coupled with 4-methoxybenzenediazonlum tetrafluoroborate (MBDF) fixed on the μTAD to produce tangerine compounds. The inherent colour variation was captured by a smartphone and processed to calculate the intensity (I). Under the optimal conditions, the limit of quantification was within 0.020-0.027 mg kg^-1. The recovery was varied in the range from 92.3% to 105.9% with a relative standard deviation (RSD) below 5%. The developed method provides an alternative strategy to extract and detect pesticides for food samples.

Magnetically driven microfluidics for isolation of circulating tumor cells

Circulating tumor cells (CTCs) largely contribute to cancer metastasis and show potential prognostic significance in cancer isolation and detection. Miniaturization has progressed significantly in the last decade which in turn enabled the development of several microfluidic systems. The microfluidic systems offer a controlled microenvironment for studies of fundamental cell biology, resulting in the rapid development of microfluidic isolation of CTCs. Due to the inherent ability of magnets to provide forces at a distance, the technology of CTCs isolation based on the magnetophoresis mechanism has become a routine methodology. This historical review aims to introduce two principles of magnetic isolation and recent techniques, facilitating research in this field and providing alternatives for researchers in their study of magnetic isolation. Researchers intend to promote effective CTC isolation and analysis as well as active development of next-generation cancer treatment. The first part of this review summarizes the primary principles based on positive and negative magnetophoretic isolation and describes the metrics for isolation performance. The second part presents a detailed overview of the factors that affect the performance of CTC magnetic isolation, including the magnetic field sources, functionalized magnetic nanoparticles, magnetic fluids, and magnetically driven microfluidic systems.

Detection of Rare Objects by Flow Cytometry: Imaging, Cell Sorting, and Deep Learning Approaches

Flow cytometry nowadays is among the main working instruments in modern biology paving the way for clinics to provide early, quick, and reliable diagnostics of many blood-related diseases. The major problem for clinical applications is the detection of rare pathogenic objects in patient blood. These objects can be circulating tumor cells, very rare during the early stages of cancer development, various microorganisms and parasites in the blood during acute blood infections. All of these rare diagnostic objects can be detected and identified very rapidly to save a patient's life. This review outlines the main techniques of visualization of rare objects in the blood flow, methods for extraction of such objects from the blood flow for further investigations and new approaches to identify the objects automatically with the modern deep learning methods.

Inversion Algorithm of Fiber Bragg Grating for Nanofluid Flooding Monitoring

In the current study, we developed an adaptive algorithm that can predict oil mobilization in a porous medium on the basis of optical data. Associated mechanisms based on tuning the electromagnetic response of magnetic and dielectric nanoparticles are also discussed. This technique is a promising method in rational magnetophoresis toward fluid mobility via fiber Bragg grating (FBG). The obtained wavelength shift due to Fe3O4 injection was 75% higher than that of dielectric materials. This use of FBG magneto-optic sensors could be a remarkable breakthrough for fluid-flow tracking in oil reservoirs. Our computational algorithm, based on piecewise linear polynomials, was evaluated with an analytical technique for homogeneous cases and achieved 99.45% accuracy. Theoretical values obtained via coupled-mode theory agreed with our FBG experiment data of at a level of 95.23% accuracy.

Recent Advances in Continuous-Flow Particle Manipulations Using Magnetic Fluids

Magnetic field-induced particle manipulation is simple and economic as compared to other techniques (e.g., electric, acoustic, and optical) for lab-on-a-chip applications. However, traditional magnetic controls require the particles to be manipulated being magnetizable, which renders it necessary to magnetically label particles that are almost exclusively diamagnetic in nature. In the past decade, magnetic fluids including paramagnetic solutions and ferrofluids have been increasingly used in microfluidic devices to implement label-free manipulations of various types of particles (both synthetic and biological). We review herein the recent advances in this field with focus upon the continuous-flow particle manipulations. Specifically, we review the reported studies on the negative magnetophoresis-induced deflection, focusing, enrichment, separation, and medium exchange of diamagnetic particles in the continuous flow of magnetic fluids through microchannels.

Magnetic Particles for Advanced Molecular Diagnosis

Molecular diagnosis is the field that aims to develop nucleic-acid-based analytical methods for biological markers and gene expression assessments by combining laboratory medicine and molecular genetics. As it gradually becomes a clinical reality, molecular diagnosis could benefit from improvements resulting from thorough studies that could enhance the accuracy of these methods. The application of magnetic particles in molecular diagnosis tools has led to tremendous breakthroughs in terms of specificity, sensitivity, and discrimination in bioassays. Therefore, the aim of this review is to highlight the principles involved in the implementation of magnetic particles for sample preparation and targeted analyte isolation, purification, and extraction. Furthermore, the most recent advancements in the area of cancer and infectious disease diagnosis are presented, with an emphasis on screening and early stage detection.

Magnetically Induced Flow Focusing of Non-Magnetic Microparticles in Ferrofluids under Inclined Magnetic Fields

The ability to focus biological particles into a designated position of a microchannel is vital for various biological applications. This paper reports particle focusing under vertical and inclined magnetic fields. We analyzed the effect of the angle of rotation (θ) of the permanent magnets and the critical Reynolds number (Re_c) on the particle focusing in depth. We found that a rotation angle of 10° is preferred; a particle loop has formed when Re < Re_c and Re_c of the inclined magnetic field is larger than that of the vertical magnetic field. We also conducted experiments with polystyrene particles (10.4 μm in diameter) to prove the calculations. Experimental results show that the focusing effectiveness improved with increasing applied magnetic field strength or decreasing inlet flow rate.

Recent advances and current challenges in magnetophoresis based micro magnetofluidics

The combination of magnetism and microscale fluid flow has opened up a new era for handling and manipulation of samples in microfluidics. In particular, magnetophoresis, the migration of particles in a magnetic field, is extremely attractive for microfluidic handling due to its contactless nature, independence of ionic concentration, and lack of induced heating. The present paper focuses on recent advances and current challenges of magnetophoresis and highlights the key parameters affecting the manipulation of particles by magnetophoresis. The magnetic field is discussed according to their relative motion to the sample as stationary and dynamic fields. The migration of particles is categorized as positive and negative magnetophoresis. The applications of magnetophoresis are discussed according to the basic manipulation tasks such as mixing, separation, and trapping of particles or cells. Finally, the paper highlights the limitations of current approaches and provides the future perspective for this research area.