Performance of polyaniline-derived Fe-N-C catalysts for oxygen reduction reaction in alkaline electrolyte

High yield of hydrogen peroxide on modified graphite felt electrode with nitrogen-doped porous carbon carbonized by zeolitic imidazolate framework-8 (ZIF-8) nanocrystals

The aim of this work was to develop a new modified graphite felt (GF) as carbonaceous cathode for electro-Fenton (EF) application loaded with nitrogen-doped porous carbon (NPC) carbonized by zeolitic imidazolate framework-8 (ZIF-8) nanocrystals as carbon precursor. At initial pH 7, the highest generation rate of H₂O₂ was 0.74 mg h^-1 cm^-2 by applying 12.5 mA cm^-2 by modified cathode, but in the same condition, the GF only had 0.067 mg h^-1 cm^-2. The production efficiency increased 10 times. Additionally, phenol (50 mg L^-1) could be largely removed by NPC modified cathode, the mineralization ratio and TOC reached 100% and 82.61% at 120 min of optimization condition, respectively. The NPC cathode kept its stability after 5 cycles. The materials were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and linear sweep voltammetry (LSV). The results demonstrated that a homogenous NPC covered the carbon-based material GF. The existing graphitic-N and sp² carbon of NPC promoted the electron transfer between carbon surface and oxygen molecules, as well as accelerated the oxygen reduction reaction (ORR) and the modified graphite felt had much higher electrocatalytic activity. In this work, several manufacturing parameters like the current, pH and load of NPC were optimized. The optimized design could improve the efficiency of new cathode with in situ electro-chemical production of H₂O₂ and significantly offer a potential material for degradation of organic pollutants.

Nonpyrolyzed Fe-N Coordination-Based Iron Triazolate Framework: An Efficient and Stable Electrocatalyst for Oxygen Reduction Reaction

Pyrolyzed base-metal-based metal-organic frameworks (MOFs) with FeN_x coordination are emerging as nonprecious metal catalysts for electrochemical oxygen reduction reaction (ORR). However, surprisingly, nonpyrolyzed MOFs involving Fe-N coordination have not been explored for the ORR. This study concerns the catalytic performance of a semiconducting nonpyrolyzed iron triazolate framework (FeTa₂ ) for ORR in alkaline electrolyte. The FeTa₂ catalyst is studied as composites with different amounts of conductive Ketjenblack carbon (KB). The performance of these FeTa₂ -x KB (x denotes the KB/FeTa₂ weight ratio) composites by onset and half-wave potentials of ORR appears to be superior to most previously documented nonpyrolyzed MOFs. Characterization by elemental analysis, FTIR spectroscopy, XPS, and cyclic voltammetry suggest that N-Fe^III -OH^- sites at the surface of FeTa₂ function as the catalytic active sites. This FeTa₂ also shows very stable activity during ORR, as supported by accelerated durability test of the FeTa₂ -x KB sample (20 000 cycles, ca. 90 h). The framework structure of FeTa₂ remains intact during the durability test, which would help to explain its excellent catalytic durability. This would be the first study demonstrating efficient and stable ORR catalysis by a nonpyrolyzed Fe-N coordination-based MOF material.

Tuning the Electrocatalytic Performance of Ionic Liquid Modified Pt Catalysts for the Oxygen Reduction Reaction via Cationic Chain Engineering

Modifying Pt catalysts using hydrophobic ionic liquids (ILs) has been demonstrated to be a facile approach for boosting the performance of Pt catalysts for the oxygen reduction reaction (ORR). This work aims to deepen the understanding and initiate a rational molecular tuning of ILs for improved activity and stability. To this end, Pt/C catalysts were modified using a variety of 1-methyl-3-alkylimidazolium bis(trifluoromethanesulfonyl)imide ([C _n C₁im][NTf₂], n = 2-10) ILs with varying alkyl chain lengths in imidazolium cations, and the electrocatalytic properties (e.g., electrochemically active surface area, catalytic activity, and stability) of the resultant catalysts were systematically investigated. We found that ILs with long cationic chains (C6, C10) efficiently suppressed the formation of nonreactive oxygenated species on Pt; however, at the same time they blocked active Pt sites and led to a lower electrochemically active surface area. It is also disclosed that the catalytic activity strongly correlates with the alkyl chain length of cations, and a distinct dependence of intrinsic activity on the alkyl chain length was identified, with the maximum activity obtained on Pt/C-[C₄C₁im][NTf₂]. The optimum arises from the counterbalance between more efficient suppression of oxygenated species formation on Pt surfaces and more severe passivation of Pt surfaces with elongation of the alkyl chain length in imidazolium cations. Moreover, the presence of an IL can also improve the electrochemical stability of Pt catalysts by suppressing the Pt dissolution, as revealed by combined identical-location transmission electron microscopy (TEM) and in situ inductively coupled plasma mass spectrometry (ICP-MS) analyses.

Is Ammonium Peroxydisulate Indispensable for Preparation of Aniline-Derived Iron-Nitrogen-Carbon Electrocatalysts?

Iron and nitrogen co-doped carbon (Fe-N-C) materials are among the most active non-precious metal catalysts that could replace Pt-based electrocatalysts for the oxygen reduction reaction (ORR) in fuel cells and metal-air batteries. The synthesis of the Fe-N-C catalysts often involves the use of aniline as the precursor for both N and C and ammonium peroxydisulfate (APS) as an indispensable oxidative initiator for aniline polymerization. Herein, a detailed structure and catalytic ORR performance comparison of aniline-derived Fe-N-C catalysts synthesized with and without the use of APS is reported. The APS-free preparation, which uses Fe(III) ions as the Fe source as well as the aniline polymerization initiator, results in a simple Fe-N-C catalyst with a high activity for the ORR. We show that APS is not necessary for the preparation and even detrimental to the performance of the catalyst.