Activity and stability of bacterial cellulase immobilized on magnetic nanoparticles

Combinatorial optimization of the hybrid cellulase complex structure designed from modular libraries

Cellulase selectively recognizes cellulose surfaces and cleaves their β-1,4-glycosidic bonds. Combining hydrolysis using cellulase and fermentation can produce alternative fuels and chemical products. However, anaerobic bacteria produce only low levels of highly active cellulase complexes so-called cellulosomes. Therefore, we designed hybrid cellulase complexes from 49 biotinylated catalytic domain (CD) and 30 biotinylated cellulose-binding domain (CBD) libraries on streptavidin-conjugated nanoparticles to enhance cellulose hydrolysis by mimicking the cellulosome structure. The hybrid cellulase complex, incorporating both native CD and CBD, significantly improved reducing sugar production from cellulose compared to free native modular enzymes. The optimal CBD for each hybrid cellulase complex differed from that of the native enzyme. The most effective hybrid cellulase complex was observed with the combination of CD6-4 from Thermobifida fusca YX and CBD46 from the Bacillus halodurans C-125. The hybrid cellulase complex/CD6-4-CBD46 and -CD6-4-CBD2-5 combinations showed increased reducing sugar production. Similar results were also observed in microcrystalline cellulose degradation. Furthermore, clustering on nanoparticles enhanced enzyme thermostability. Our results demonstrate that hybrid cellulase complex structures improve enzyme function through synergistic effects and extend the lifespan of the enzyme.

Assessment of the efficiency of immobilized degrading microorganisms in removing the organochlorine pesticide residues from agricultural soils

To investigate the removal of organochlorine pesticide residues by immobilized degrading microbe, indigenous microorganisms from organochlorine pesticide (OCP)-contaminated soils in Chengdu plain, pot experiments were carried out to evaluate the potential of the immobilized complex microbial specific degrading microbe treated with sodium alginate (SA) composite carrier in decontaminating OCP-contaminated soils, and field experiments were also conducted to investigate the enhanced efficiency of immobilized microbial agents on the dissipation of OCPs in the contaminated plots for different cultivation usage. The results showed that the dissipation rate of OCPs in contaminated soils with initial concentrations of 122.24 μg/kg was 89.94% after the addition of 25 mg of immobilized microbial agents at the end of the 90 days of experiment, which was 6.1% higher than that of the compound microbial agents under the same environmental conditions, and the control group without the addition of microbial agents was only 1.18%, while the concentration of OCPs in contaminated soils with initial concentrations of 203.64 μg/kg only decreased to 65.29 μg/kg after the addition of 20 mg of compound microbial agents. In contrast, the soil concentration of immobilized microbial agent treatment group under the same conditions decreased to 52.15 μg/kg. During the field experiment, the enhanced efficiency of immobilized microbial agents on the degradation of OCPs in different cultivation usage was evidently different, showed that the concentration of OCPs in paddy fields (18.60%) > tea gardens (12.17%) ≥ orchards (11.41%) > vegetable fields (6.21%) ≥ dryland (4.79%), which was especially significant in stress environment. Overall, the immobilization treatment obviously improved the degradation potential of OCPs-specific degrading microbe, and the degree of improvement was related to the metabolic activity of the degrading microbe, the addition amount, remediation time, and habitat conditions.

Optimization and characterization of alkaliphilic lipase from a novel Bacillus cereus NC7401 strain isolated from diesel fuel polluted soil

Five Bacillus cereus strains including B. cereus AVP12, B. cereus NC7401, B. cereus BDBCO1, B. cereus JF70 and B. specie JL47 isolated from the diesel fuel polluted soil adhered to the roots of Tagetes minuta were screened for lipase production with phenol red agar method. B. cereus NC7401 strain successfully expressing and secreting lipase with maximal lipolytic activity was subjected to a submerged fermentation process with five different carbon (starch, glucose, maltose, fructose, and lactose) and five different nitrogen (tryptone, ammonium nitrate, peptone, urea, yeast extract) sources to produce lipase enzyme. Maximum enzyme activity was found with starch (30.6 UmL-1), maltose (40 UmL-1), and tryptone (38.6 UmL-1), and the lipases produced using these sources were named lipase A, B, and C respectively. The total protein content of 8.56, 8.86, and 2.75 μg mL-1 were obtained from B. cereus NC7401 cultured using starch, maltose, and tryptone respectively. Lipase was stable between temperature range 30–80°C and pH 5–10 whereas optimally active at 55°C and pH 8.0. The enzyme was relatively stable for 10 days at 4°C and its optimum reaction time with the substrate was 30 minutes. It was tolerant to 1.5% (v/v) methanol as an organic solvent, 1.5% (v/v) Triton X-100 as a media additive and 1.5% (w/v) Ni2+ as a metal ion. SDS, n-hexane, and Ag+ inhibited lipolytic activity. Oil stains were removed from cotton fabric which showed oil removal efficiency enhancement in the presence of a lipase. Fat hydrolysis of 20, 24, and 30% was achieved following 6 hours of incubation of the fat particles with lipase A, B, and C respectively at a concentration of 20 mg mL-1. To as best of our knowledge, this study on lipases extracted from bacteria of Azad Kashmir, Pakistan origin has never been reported before.

Sustainable green approach to synthesize Fe3O4/α-Fe2O3 nanocomposite using waste pulp of Syzygium cumini and its application in functional stability of microbial cellulases

Synthesis of nanomaterials following green routes have drawn much attention in recent years due to the low cost, easy and eco-friendly approaches involved therein. Therefore, the current study is focused towards the synthesis of Fe3O4/α-Fe2O3 nanocomposite using waste pulp of Jamun (Syzygium cumini) and iron nitrate as the precursor of iron in an eco-friendly way. The synthesized Fe3O4/α-Fe2O3 nanocomposite has been extensively characterized through numerous techniques to explore the physicochemical properties, including X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, Ultraviolet-Vis spectroscopy, field emission scanning electron microscope, high resolution transmission electron microscope and vibrating sample magnetometer. Further, efficiency of the Fe3O4/α-Fe2O3 nanocomposite has been evaluated to improve the incubation temperature, thermal/pH stability of the crude cellulase enzymes obtained from the lab isolate fungal strain Cladosporium cladosporioides NS2 via solid state fermentation. It is found that the presence of 0.5% Fe3O4/α-Fe2O3 nanocomposite showed optimum incubation temperature and thermal stability in the long temperature range of 50-60 °C for 15 h along with improved pH stability in the range of pH 3.5-6.0. The presented study may have potential application in bioconversion of waste biomass at high temperature and broad pH range.

Enzymatic treatment of phenolic pollutants by a small laccase immobilized on APTES-functionalised magnetic nanoparticles

In this study, we have successfully synthesized magnetic nanoparticles (MNPs), functionalised them by silanization and used them for the covalent immobilization of a recombinant small laccase (rSLAC) from Streptomyces coelicolor. The immobilized recombinant laccase (MNP-rSLAC) was subsequently used for the treatment of phenol, 4-chlorophenol (4-CP) and 4-fluorophenol (4-FP). The enzyme completely degraded 80 µg/mL of the selected phenolic compounds within 2 h in the presence of a natural mediator, acetosyringone. The MNP-rSLAC retained > 73% of initial activity (2,6-dimethoxyphenol as substrate) after 10 catalytic cycles and could be easily recovered from the reaction mixture by the application of magnetic field. Furthermore, immobilised rSLAC exhibited better storage stability than its free counterpart. The Michaelis constant (K_m) value for the immobilised rSLAC was higher than free rSLAC, however the maximum velocity (V_max) of the immobilised SLAC was similar to that of the free rSLAC. Growth inhibition studies using Escherichia coli showed that rSLAC-mediated treatment of phenolic compounds reduced the toxicity of phenol, 4-CP and 4-FP by 90, 60 and 55%, respectively. Interestingly, the presence of selected metal ions (Co²⁺, Cu²⁺, Mn²⁺) greatly enhanced the catalytic activity of rSLAC and MNP-rSLAC. This study indicates that immobilized small laccase (MNP-rSLAC) has potential for treating wastewater contaminated with phenolic compounds.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02854-0.

Chlorpyrifos degradation efficiency of Bacillus sp. laccase immobilized on iron magnetic nanoparticles

The present study explored the immobilization of laccase onto iron magnetic nanoparticles (MNPs) to enhance its enzymatic properties and applications. The immobilization process was optimized using Box-Behnken design (BBD). BBD showed significance towards the quadratic model with experimental data. Maximum laccase activity recovery (99%) of the predicted model was observed at 0.75 mg/mL of laccase concentration, 200 mg/mL of MNPs, 0.3% cross linking with carbodiimide, and 3 h of cross-linking time. The magnetization activity of MNPs (8 emu/g) and the immobilized laccase with MNPs (4 emu/g) was analyzed using vibrating sample magnetometer (VSM). Maximum activity of immobilized laccase was observed at pH 7.0 and 55 °C. The immobilized laccase has greater stability (100 h) and significant chlorpyrifos (pesticide) degradation activity. High-performance liquid chromatography (HPLC) results confirmed the degraded metabolic products of chlorpyrifos. In all, the immobilized laccase was superior to free laccase, showing promising structural and application characteristics.

pH-responsive lignin-based magnetic nanoparticles for recovery of cellulase

Enzymatic hydrolysis of lignocellulose to produce bioethanol by cellulase is an important method to alleviate the energy crisis. In this paper, in order to overcome the shortcomings of low efficiency, high cost and easy deactivation of cellulase in the process of bio-refinery, pH-responsive lignin-based magnetic nanoparticles (Fe₃O₄/LSQA) were synthesized to immobilize and recover cellulase. It was shown that a high immobilization ratio of 55.52% for cellulase was obtained. Meanwhile, the desorption ratio was 68.27% by adjusting the pH of the system. After five reusing cycles, the desorbed cellulase retained 31.79% of the relative activity due to the pH responsiveness of Fe₃O₄/LSQA. These results not only provide a new idea for the recycling of cellulase, but also broaden the application of industrial lignin and increase the extra value.

Microbial dynamics for lignocellulosic waste bioconversion and its importance with modern circular economy, challenges and future perspectives

An extensive use of microbial dynamics for utilizing the lignocellulosic wastes has been attributed to their efficiency in bioenergy and bioproducts development as a cost effective high nutritional value. The integration of lignocellulosic waste into the circular economy can scaleup the sustainable bioproducts and bioenergy development. In this review paper, the aim is to describe the existing research efforts on organic lignocellulosic waste, cellulase producing microbes, their potential enzyme, modern circular economy with associated challenges and future perspectives. Presently, it has been reviewed that microbial cellulases have provided treasure bioproducts visions into industrial bioproducts marvels unveiled through lignocellulosic waste cutting-edge microbial explorations. Furthermore, the review focused on new insights of the growing circular economy of lignocellulosic waste used for many bioproducts and bioenergy dealings and explored the emergent lignocellulosic biorefinery approaches which could then be applied to review industrial-scale sustainable economic models for upgraded bioproducts and other production associated problems.

Penaeus vannamei protease stabilizing process of ZnS nanoparticles

The protease enzyme purified from the Penaeus vannamei shrimp has unique properties, so improving the stability of this enzyme can improve their practical applications. In this study, ZnS nanoparticles, which have special properties for enzyme immobilization, were synthesized using a chemical precipitation method, and Penaeus vannamei protease was successfully immobilized on them. The size, structure, and morphology of the ZnS nanoparticles, and the immobilization of the protease were studied, using Transmission Electron Microscopy (TEM), Fourier Transform Infrared (FT-IR) spectroscopy, UV-Vis spectroscopy and Dynamic Light Scattering (DLS) analysis. We show that the immobilized enzyme has improved functionality at high temperatures, extreme pH conditions (pH3 and 12), and during storage. Immobilization increased the optimum temperature range of the enzyme, but did not change the pH optimum, which remained at pH7. Immobilization of P. vannamei protease enzyme increased the K_m and decreased k_cat/K_m. These results indicate that P. vannamei protease immobilized on ZnS nanoparticles, has improved properties due to its high stability and unique properties, can be used for biotechnology applications.