Preparation of gold clusters on metal oxides by deposition-precipitation with microwave drying and their catalytic performance for CO and sulfide oxidation

Decoration of Gold and Platinum Nanoparticle Catalysts by 1 nm Thick Metal Oxide Overlayer and Its Effect on the CO Oxidation Activity

Exfoliated M-Al layered double hydroxide (M-Al LDH; M = Mg, Co, Ni, and Zn) nanosheets were adsorbed on Au/SiO2 and calcined to transform LDH into mixed metal oxides (MMOs) and yield Au/SiO2 coated with a thin MMO overlayer. These catalysts showed a higher catalytic activity than pristine Au/SiO2. In particular, the 50% CO conversion temperature decreased by more than 250 °C for Co-Al MMO-coated Au/SiO2. In contrast, the deposition of CoAlOx on Au/SiO2 by impregnation or the deposition of Au on Co-Al MMO-coated SiO2 resulted in a worse catalytic activity. Moreover, the presence of a thick MMO overlayer decreased the catalytic activity, suggesting that the control of the overlayer thickness to less than 1 nm is a requisite for obtaining a high catalytic activity. Moreover, the thin Co-Al MMO overlayer on Au/SiO2 possessed abundant oxygen vacancies, which would play an important role in O2 activation, resulting in a highly active interface between Au and the defect-rich MMO on the Au NP surface. Finally, this can be applied to Pt/SiO2, and the obtained Co-Al MMO-coated Pt/SiO2 also exhibited a much improved catalytic activity for CO oxidation.

Research status and prospect of nano silver (Ag)-modified photocatalytic materials for degradation of organic pollutants

Nano silver (Ag) was metallic Ag monomers with particle size to the nanoscale. Photocatalyst was a kind of semiconductor material with photocatalytic function. Loading precious metal Ag onto semiconductor surfaces by microwave, laser-induced, solvent-thermal and hydrothermal methods could capture photogenerated electrons, reduced the compounding rate of holes and photogenerated electrons during the photocatalytic process, thereby improving the electron transfer efficiency of photocatalysis and enhancing the absorption of visible light by silver nanoparticles through the plasma resonance effect. The highly reactive free radicals produced by photocatalysts were used in the organic degradation process to degrade organic matter into inorganic matter and was a faster, more efficient and less polluting method of pollutant degradation, which has attracted a lot of attention from researchers. This review discussed the modification of various types of photocatalysts by nano Ag through different methods. The photocatalytic degradation of dyes, antibiotics and persistent organic pollutants by different modified composites was also analyzed. This review covered the several ways and means in which nano Ag has modified diverse photocatalytic materials as well as the photocatalytic degradation of dyes, antibiotics and persistent organic pollutants. This review identified the drawbacks of the existing nano Ag-modified photocatalytic materials, including their low yield and lack of recyclability, and it also offered suggestions for potential future directions for their improvement. The purpose of this review was to further research on the technology of nano Ag-modified photocatalytic materials and to encourage the creation of new modified photocatalytic nanomaterials for the treatment of organic pollutant degradation.

Au3+ Species Boost the Catalytic Performance of Au/ZnO for the Semi-hydrogenation of Acetylene

Au nanoparticles have garnered remarkable attention in the chemoselective hydrogenation due to their extraordinary selectivity. However, the activity is far from satisfactory. Knowledge of the structure-performance relationship is a key prerequisite for rational designing of highly efficient Au-based hydrogenation catalysts. Herein, diverse Au sites were created through engineering their interactions with supports, specifically via adjusting the support morphology, that is, flower-like ZnO (ZnO-F) and disc-like ZnO (ZnO-D), and the catalyst pretreatment atmosphere, that is, 10 vol % O₂/Ar and 10 vol % H₂/Ar (denoted as -O and -H, respectively). The four samples of Au/ZnO were characterized by various techniques and evaluated in the semi-hydrogenation of acetylene. The transmission electron microscopy results indicated that the Au particle sizes are almost similar for our Au/ZnO catalysts. The charge states of Au species demonstrated by X-ray photoelectron spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy with CO as the probe molecule, and simulation based on density functional theory, however, are greatly dependent on the ZnO shape and pretreatment atmosphere, that is, the percentage of Au³⁺ reduces following the order of Au/ZnO-F-O > Au/ZnO-F-H > Au/ZnO-D-O > Au/ZnO-D-H. The testing results showed that the Au/ZnO-F-O catalyst containing maximum of Au³⁺ possesses the optimal activity with 1.8 × 10^-2 s^-1 of specific activity at 200 °C, around 16.5-fold of that for Au/ZnO-D-H. More interestingly, the specific rate at 200 °C and the average conversion/selectivity in the entire operating temperature range are well correlated with the redox states of the Au species, indicating that Au³⁺ sites are more active for acetylene hydrogenation. A plausible explanation is that the Au³⁺ species not only facilitate acetylene adsorption via electrostatic interactions but also favor the heterolysis of H₂ via constructing frustrated Lewis pairs with O.

Praseodymium hydroxide/gold-supported precursor: a new strategy for preparing stable and active catalyst for the water-gas shift reaction

Rod-shaped praseodymium hydroxide (Pr(OH)_x) as a hydroxyl- and O vacancy-rich support can promote the dispersion and stabilization of Au species show high activity and stability for water gas shift reaction, and holds great promise in the field of heterogeneous catalysis.