Enhanced Fenton, photo-Fenton and peroxidase-like activity and stability over Fe 3 O 4 /g-C 3 N 4 nanocomposites

0D/2D dual Fenton α-Fe2O3/Fe-doped g-C3N4 photocatalyst and the synergistic photo-Fenton catalytic mechanism insight

A novel dual Photo-Fenton photocatalyst Fe2O3-Fe-CN with excellent Fe(III)/Fe(II) conversion efficiency and trace metal ion leaching rate has been fabricated by in-situ deposition of α-Fe2O3 quantum dots on ultrathin porous Fe-doped carbon nitride (Fe-CN) nanosheets. The iron species in Fe-CN and α-Fe2O3 QDs constitute a mutually reinforcing dual Photo-Fenton effect. The 4% Fe2O3-Fe-CN showed superior performance with kobs values 8.60 and 4.80 folders greater than pure CN and Fe-CN, respectively. The synergistic effect between α-Fe2O3 QDs and the ultrathin porous structure of Fe-CN is the primary reason for the outstanding catalytic performance exhibited by α-Fe2O3/Fe-CN. On one hand, the ultrathin porous structure of Fe-CN promotes the rapid transfer of photogenerated electrons. On the other hand, the efficient photogenerated charge separation at the α-Fe2O3/Fe-CN interface enables more photogenerated electrons to participate in the Fe3+/Fe2+ conversion and H2O2 activation. The trapping experiments demonstrate that •OH and •O2- are the primary active species in TC degradation. This work presents novel insights into the design of efficient heterogeneous Fenton catalysts for practical applications.

Preparation of high-efficiency titanium ion immobilized magnetic graphite nitride nanocomposite for phosphopeptide enrichment

BACKGROUND

Protein phosphorylation has been implicated in life processes including molecular interaction, protein structure transformation, and malignant disease. An in-depth study of protein phosphorylation may provide vital information for the discovery of early biomarkers. Mass spectrometry (MS)-based techniques have become an important method for phosphopeptide identification. Nevertheless, direct detection remains challenging because of the low ionization efficiency of phosphopeptides and serious interference from non-phosphopeptides. There is a great need for an efficient enrichment strategy to analyze protein phosphorylation prior to MS analysis.

RESULTS

In this study, a novel nanocomposite was prepared by introducing titanium ions into two-dimensional magnetic graphite nitride. The nanocomposite was combined with immobilized metal ion affinity chromatography (IMAC) and anion-exchange chromatography mechanisms for phosphoproteome research. The nanocomposite had the advantages of a large specific surface (412.9 m2 g-1), positive electricity (175.44 mV), and excellent magnetic property (35.7 emu g-1). Moreover, it presented satisfactory selectivity (α-casein:β-casein:bovine serum albumin = 1:1:5000), a low detection limit (0.02 fmol), great recyclability (10 cycles), and high recovery (92.8%). The nanocomposite demonstrated great practicability for phosphopeptides from non-fat milk, human serum, and saliva. Further, the nanocomposite was applied to enrich phosphopeptides from a more complicated specimen, A549 cell lysate. A total of 890 phosphopeptides mapping to 564 phosphoproteins were successfully detected with nano LC-MS.

SIGNIFICANCE

We successfully designed and developed an efficient analysis platform for phosphopeptides, which includes protein digestion, phosphopeptide enrichment, and MS detection. The MS-based enrichment platform was further used to analyze phosphopeptides from complicated bio-samples. This work paves the way for the design and preparation of graphite nitride-based IMAC materials for phosphoproteome analysis.

Rugged Forest Morphology of Magnetoplasmonic Nanorods that Collect Maximum Light for Photoelectrochemical Water Splitting

A feasible nanoscale framework of heterogeneous plasmonic materials and proper surface engineering can enhance photoelectrochemical (PEC) water-splitting performance owing to increased light absorbance, efficient bulk carrier transport, and interfacial charge transfer. This article introduces a new magnetoplasmonic (MagPlas) Ni-doped Au@Fex Oy nanorods (NRs) based material as a novel photoanode for PEC water-splitting. A two stage procedure produces core-shell Ni/Au@Fex Oy MagPlas NRs. The first-step is a one-pot solvothermal synthesis of Au@Fex Oy . The hollow Fex Oy nanotubes (NTs) are a hybrid of Fe2 O3 and Fe3 O4 , and the second-step is a sequential hydrothermal treatment for Ni doping. Then, a transverse magnetic field-induced assembly is adopted to decorate Ni/Au@Fex Oy on FTO glass to be an artificially roughened morphologic surface called a rugged forest, allowing more light absorption and active electrochemical sites. Then, to characterize its optical and surface properties, COMSOL Multiphysics simulations are carried out. The core-shell Ni/Au@Fex Oy MagPlas NRs increase photoanode interface charge transfer to 2.73 mAcm-2 at 1.23 V RHE. This improvement is made possible by the rugged morphology of the NRs, which provide more active sites and oxygen vacancies as the hole transfer medium. The recent finding may provide light on plasmonic photocatalytic hybrids and surface morphology for effective PEC photoanodes.

Dual-Mode-Driven Micromotor Based on Foam-like Carbon Nitride and Fe3O4 with Improved Manipulation and Photocatalytic Performance

Micro/nanomotors have emerged as a vibrant research topic in biomedical and environmental fields due to their attractive self-propulsion as well as small-scale functionalities. However, single actuated micro/nanomotors are not adaptive in facing intricate natural and industrial environments. Herein, we propose a new dual-mode-driven micromotor based on foam-like carbon nitride (f-C₃N₄) with precipitated Fe₃O₄ nanoparticles, namely, Fe₃O₄/f-C₃N₄, powered by chemical/magnetic stimuli for rapid reduction of organic pollutants. The Fe₃O₄/f-C₃N₄ motor composed of a three-dimensional (3D) porous "foam-like" structure and precipitated Fe₃O₄ nanoparticles (ca. 50 nm) not only exhibits efficient photocatalytic performance under visible light but also shows versatile and programmable motion behavior under the control of external magnetic fields. The aggregation of the micromotor under an external rotating magnetic field further enhances the catalytic activity by the increased local catalyst concentration. Furthermore, the magnetic property endows the micromotor with easy recyclability. This study provides a novel dual-mode-driven micromotor for antibiotics removal with magnetic field and light-enhanced performance in industrial wastewater treatment at a low cost.

Removal of Arsenic from Wastewater by Using Nano Fe3O4/Zinc Organic Frameworks

Efficient removal of arsenic in wastewater is of fundamental importance due to the increasingly severe arsenic pollution. In this study, a new composite adsorbent (Fe₃O₄@ZIF-8) for As(V) removal from wastewater was synthesized by encapsulating magnetic Fe₃O₄ nanoparticles into metal organic frameworks. In order to evaluate the feasibility of Fe₃O₄@ZIF-8 as an adsorbent for As(V) removal, the adsorption properties of Fe₃O₄@ZIF-8 were systematically explored by studying the effects of dosage, pH, adsorption isotherm, kinetics, and thermodynamics. Additionally, the characterization of Fe₃O₄@ZIF-8 before and after adsorption was analyzed thoroughly using various tests including SEM-EDS, XPS, BET, XRD, TG, FTIR, and the properties and arsenic removal mechanism of the Fe₃O₄@ZIF-8 were further studied. The results showed that the Fe₃O₄@ZIF-8 has a specific surface area of 316 m²/g and has excellent adsorption performance. At 25 °C, the initial concentration of arsenic was 46.916 mg/L, and pH 3 was the optimum condition for the Fe₃O₄@ZIF-8 to adsorb arsenic. When the dosage of the Fe₃O₄@ZIF-8 was 0.60 g/L, the adsorption of arsenic by the Fe₃O₄@ZIF-8 can reach 76 mg/g, and the removal rate can reach 97.20%. The adsorption process of arsenic to the Fe₃O₄@ZIF-8 can be well described by the Langmuir isotherm model and the second-order kinetic equation. At pH 3 and temperature 298 K, the maximum adsorption capacity of arsenic by the Fe₃O₄@ZIF-8 was 116.114 mg/g. Through the analysis of thermodynamic parameters, it is proved that the adsorption process of arsenic by the Fe₃O₄@ZIF-8 is a spontaneous endothermic reaction. The Fe₃O₄@ZIF-8 has broad prospects for removing As(V) pollution in wastewater, because of its strong adsorption capacity, good water stability, and easy preparation.

Nanozyme Catalytic Turnover and Self-Limited Reactions

Enzymes have catalytic turnovers. The field of nanozyme endeavors to engineer nanomaterials as enzyme mimics. However, a discrepancy in the definition of "nanozyme concentration" has led to an unrealistic calculation of nanozyme catalytic turnovers. To date, most of the reported works have considered either the atomic concentration or nanoparticle (NP) concentration as nanozyme concentration. These assumptions can lead to a significant under- or overestimation of the catalytic activity of nanozymes. In this article, we review some classic nanozymes including Fe₃O₄, CeO₂, and gold nanoparticles (AuNPs) with a focus on the reported catalytic activities. We argue that only the surface atoms should be considered as nanozyme active sites, and then the turnover numbers and rates were recalculated based on the surface atoms. According to the calculations, the catalytic turnover of peroxidase Fe₃O₄ NPs is validated. AuNPs are self-limited when performing glucose-oxidase like activity, but they are also true catalysts. For CeO₂ NPs, a self-limited behavior is observed for both oxidase- and phosphatase-like activities due to the adsorption of reaction products. Moreover, the catalytic activity of single-atom nanozymes is discussed. Finally, a few suggestions for future research are proposed.

Efficient activation of peroxymonosulfate by composites containing iron mining waste and graphitic carbon nitride for the degradation of acetaminophen

In this work, the potential to use an iron mining waste (IW), rich in α-Fe₂O₃ and α-FeOOH, for the development of composites based on graphitic carbon nitride (CN) is demonstrated. These materials were synthesized through a simple thermal treatment at 550 °C of a mixture containing melamine and different IW mass percentages, giving rise to the catalysts xIWCN (where x is related to the initial mass percentage of IW). The iron phases of the precursor were partially transformed throughout the formation of the composites, in such a way that a mixture of α-Fe₂O₃ and γ-Fe₂O₃ was observed in their final composition. Furthermore, structural defects were produced in the carbonaceous matrix of the materials, causing the fragmentation of g-C₃N₄ and an increase of surface area. The catalytic activities of these composites were evaluated in reactions of peroxymonosulfate activation for the degradation of paracetamol. Among these materials, the composite 20IWCN showed the best catalytic activity, being able to degrade almost 90 % of the total paracetamol in only 20 min of reaction. This catalyst also demonstrated high chemical stability, being successfully utilized in five consecutive reaction cycles, with negligible iron leaching.

Novel magnetic Fe3O4/g-C3N4/MoO3 nanocomposites with highly enhanced photocatalytic activities: Visible-light-driven degradation of tetracycline from aqueous environment

In the present work, a series of magnetically separable Fe3O4/g-C3N4/MoO3 nanocomposite catalysts were prepared. The as-prepared catalysts were characterized by XRD, EDX, TEM, FT-IR, UV-Vis DRS, TGA, PL, BET and VSM. The photocatalytic activity of photocatalytic materials was evaluated by catalytic degradation of tetracycline solution under visible light irradiation. Furthermore, the influences of weight percent of MoO3 and scavengers of the reactive species on the degradation activity were investigated. The results showed that the Fe3O4/g-C3N4/MoO3 (30%) nanocomposites exhibited highest removal ability for TC, 94% TC was removed during the treatment. Photocatalytic activity of Fe3O4/g-C3N4/MoO3 (30%) was about 6.9, 5, and 19.9-fold higher than those of the MoO3, g-C3N4, and Fe3O4/g-C3N4 samples, respectively. The excellent photocatalytic performance was mainly attributed to the Z-scheme structure formed between MoO3 and g-C3N4, which enhanced the efficient separation of the electron-hole and sufficient utilization charge carriers for generating active radials. The highly improved activity was also partially beneficial from the increase in adsorption of the photocatalysts in visible range due to the combinaion of Fe3O4. Superoxide ions (·O2-) was the primary reactive species for the photocatalytic degradation of TC, as degradation rate were decreased to 6% in solution containing benzoquinone (BQ). Data indicate that the novel Fe3O4/g-C3N4/MoO3 was favorable for the degradation of high concentrations of tetracycline in water.

Recyclable magnetic NiFe2O4/C yolk–shell nanospheres with excellent visible-light-Fenton degradation performance of tetracycline hydrochloride

A NiFe₂O₄/C yolk–shell nanostructure was prepared via one-step calcination using polyacrylic acid sodium salt (PAAS) NPs as a template, which exhibited a highly efficient visible-light photocatalytic performance for the removal of TC in the presence of H₂O₂.

Mechanistic insights into N-hydroxyphthalimide modified graphitic carbon nitride boosted photocatalytic hydrogen production

N-Hydroxyphthalimide (NHPI) retards the recombination of electron–hole pairs through extracting holes from g-C₃N₄, dramatically improving photocatalytic hydrogen production.

Noble metal-free V2O5/g-C3N4 composites for selective oxidation of olefins using hydrogen peroxide as an oxidant

Vanadium pentoxide modified graphitic carbon nitride (V2O5/g-C3N4) composites were prepared through a method of wet impregnation and calcination. The obtained samples were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy, photoluminescence, electron spin resonance and N2 adsorption/desorption isotherms. Oxidation of olefins was employed to evaluate the catalytic and photocatalytic activities of the prepared V2O5/g-C3N4 composites. Different weight ratios (1%, 2%, 3%, 4% and 5%) of V2O5 loaded composites were prepared and a 3% loaded composite was found to show optimal catalytic performance for the reaction. This noble metal-free catalyst showed excellent performance in the oxidation of styrene to benzaldehyde with high conversion (98.7%) and selectivity (88.4%) under visible light irradiation. A plausible mechanism was proposed for this oxidation reaction with hydrogen peroxide as an oxidant. Other styrene substrates were also selectively transformed to their corresponding aldehydes with high yields (up to 92%), using such a noble metal-free catalytic system.

Hantzsch ester as hole relay significantly enhanced photocatalytic hydrogen production

Hantzsch ester (DHPE) retards the recombination of electron–hole pairs through extracting holes from g-C₃N₄, thus dramatically improving visible photocatalytic hydrogen production.

Construction of flower-like MoS2/Fe3O4/rGO composite with enhanced photo-Fenton like catalyst performance

Flower-like MoS₂/Fe₃O₄/rGO composites have been constructed, which exhibit highly efficient visible-light photocatalytic performance for removing of RhB in the presence of H₂O₂.

Regenerable g-C3N4–chitosan beads with enhanced photocatalytic activity and stability

In this study, a series of regenerable graphitic carbon nitride–chitosan (g-C₃N₄–CS) beads were successfully synthesized via the blend crosslinking method. The prepared beads were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The structural characterization results indicate that the g-C₃N₄ granules were uniformly distributed on the surface of the chitosan matrix, and the structures of g-C₃N₄ and CS are maintained. In addition, the prepared g-C₃N₄–CS beads exhibited efficient MB degradation and stability. The optimum photocatalytic activity of our synthesized g-C₃N₄–CS beads was higher than that of the bulk g-C₃N₄ by a factor of 1.78 for MB. The improved photocatalytic activity was predominantly attributed to the synergistic effect between in situ adsorption and photocatalytic degradation. In addition, the reacted g-C₃N₄–CS beads can be regenerated by merely adding sodium hydroxide and hydrogen peroxide. Additionally, the regenerated g-C₃N₄–CS beads exhibit excellent stability after four runs, while the mass loss is less than 10%. This work might provide guidance for the design and fabrication of easily regenerated g-C₃N₄-based photocatalysts for environmental purification.

In this study, a series of regenerable graphitic carbon nitride–chitosan (g-C₃N₄–CS) beads were successfully synthesized via the blend crosslinking method.