Synergic effects of Cu x O electron transfer co-catalyst and valence band edge control over TiO 2 for efficient visible-light photocatalysis

S-Scheme ZIF-67/CuFe-LDH Heterojunction for High-Performance Photocatalytic H2 Evolution and CO2 to MeOH Production

The S-scheme heterojunction photocatalyst holds potential for better photocatalysis owing to its capacity to broaden the light absorption range, ease electron-hole separation, extend the charge carrier lifespan, and maximize the redox ability. In this study, we integrate zeolitic imidazolate frameworks (ZIFs-67) with the CuFe-LDH composite, offering a straightforward approach towards creating a novel hybrid nanostructure, enabling remarkable performance in both photocatalytic hydrogen (H2) evolution and carbon dioxide (CO2) to methanol (MeOH) conversion. The ZIF-67/CuFe-LDH photocatalyst exhibits an enhanced photocatalytic hydrogen evolution rate of 7.4 mmol g-1 h-1 and an AQY of 4.8%. The superior activity of CO2 reduction to MeOH generation was 227 μmol g-1 h-1 and an AQY of 5.1%, and it still exhibited superior activity after continuously working for 4 runs with nearly negligible decay in activity. The combined spectroscopic analysis, electrochemical study, and computational data strongly demonstrate that this hybrid material integrates the advantageous properties of the individual ZIF-67 and CuFe-LDH exhibiting distinguished photon harvesting, suppression of the photoinduced electron-hole recombination kinetics, extended lifetime, and efficient charge transfer, subsequently boosting higher photocatalytic activities.

The Effect of Cu(II) Nanoparticle Decoration on the Electron Relaxations and Gaseous Photocatalytic Oxidations of Nanocrystalline TiO2

A photocatalytic effect arises from the electron relaxation of semiconductors. Directing the electron relaxation toward photocatalytic reactions is the focus of photocatalytic studies. Co-catalyst decoration is a main way to modulate the electron relaxation, and the Cu(II) nanoparticles have been widely studied as an important co-catalyst. However, the detailed mechanism is still not well known. The current study is devoted to investigating the effect of the Cu(II) nanoparticle decoration on the electron relaxations for TiO2 through in situ photochromism and photoconductances, based on which the relation to the photocatalytic properties was discussed. The result shows that the Cu(II)/Cu(0) redox couple assists the double electron transfer from TiO2 to O2, while the Cu(I)/Cu(0) redox couple assists the single electron transfer to O2. Although the Cu(II) decoration changes the mechanism and increases the rate of the electron relaxations, the electron relaxation does not occur via the Cu redox couple assistance. It was found that the electron relaxation kinetics depends on the reduced Cu species, which can be greatly increased when the Cu(II) was reduced to Cu(0). It is also revealed that the electron relaxation corresponds to the electron transfer from TiO2 to O2, but it does not occur through the Cu redox couple assistance. The result also shows that the increase in the electron relaxation is mainly directed toward the recombination rather than photocatalytic reactions. The present research gains some insights on the role of the co-catalysts in the electron relaxations and its relation to photocatalysis; this should be meaningful for designing novel photocatalytic materials.

Effect of Vacuum-Sealed Annealing and Ice-Water Quenching on the Structure and Photocatalytic Acetone Oxidations of Nano-TiO2 Materials

In the current research, P25 TiO₂ materials sealed in quartz vacuum tubes were subject to annealing and ice-water post-quenching, with the effects on TiO₂ structures, morphology, and photocatalytic activity being studied. It is shown that the vacuum-sealed annealing can lead to a decrease in the crystallinity and temperature of anatase-to-rutile phase transition. A disorder layer is formed over TiO₂ nanoparticles, and the TiO₂ lattices are distorted between the disorder layer and crystalline core. The ice-water post-quenching almost has no effect on the crystalline structure and morphology of TiO₂. It can be seen that the vacuum-sealed annealing can generate more defects, and the electrons are mainly localized at lattice Ti sites, as well as the percentage of bulk oxygen defects is also increased. Although further ice-water post-quenching can introduce more defects in TiO₂, it does not affect the electron localization and defect distribution. The vacuum-sealed annealing process can increase the photocatalytic acetone oxidations of the anatase phase TiO₂ to some extent, possibly because of the defect generation and Ti³⁺ site formation; the further ice-water quenching leads to a decrease in the photocatalytic activity because more defects are introduced.

Indoor Air Photocatalytic Decontamination by UV–Vis Activated CuS/SnO2/WO3 Heterostructure

A titania-free heterostructure based on CuS/SnO2/WO3 was obtained by a three-step sol–gel method followed by spray deposition on the glass substrate. The samples exhibit crystalline structures and homogenous composition. The WO3 single-component sample morphology consists of fibers that serve as the substrate for SnO2 development. The CuS/SnO2/WO3 heterostructure is characterized by a dense granular morphology. Photocatalytic activity was evaluated under UV–Vis radiation and indicates that the WO3 single-component sample is able to remove 41.1% of acetaldehyde (64.9 ppm) and 52.5% of formaldehyde (81.4 ppm). However, the CuS/SnO2/WO3 exhibits a superior photocatalytic activity due to a larger light spectrum absorption and lower charge carrier recombination rate, allowing the removal of 69.2% of acetaldehyde and 78.5% of formaldehyde. The reusability tests indicate that the samples have a stable photocatalytic activity after three cycle (12 h/cycle) assessments. During light irradiation, the heterostructure acted as a Z-scheme mechanism using the redox ability of the CuS conduction band electrons and the SnO2/WO3 valence band holes to generate the oxidative species required for VOC removal.

Hybridization of Nanodiamond and CuFe-LDH as Heterogeneous Photoactivator for Visible-Light Driven Photo-Fenton Reaction: Photocatalytic Activity and Mechanism

Establishing a heterojunction for two kinds of semiconductor catalysts is a promising way to enhance photocatalytic activity. In this study, nanodiamond (ND) and CuFe-layered double hydroxide (LDH) were hybridized by a simple coprecipitation method as a novel heterojunction to photoactivate H2O2. The ND/LDH possessed a hydrotalcite-like structure, large specific surface area (SBET = 99.16 m2/g), strong absorption of visible-light and low band gap (Eg = 0.94 eV). Under the conditions of ND/LDH dosage 0.0667 g/L, H2O2 concentration 19.6 mmol/L, and without initial pH adjustment, 93.5% of 10 mg/L methylene blue (MB) was degraded within 120 minutes, while only 78.3% of MB was degraded in the presence of LDH instead of ND/LDH. The ND/LDH exhibited excellent stability and maintained relatively high activity, sufficient to photoactivate H2O2 even after five recycles. The mechanism study revealed that in the heterojunction of ND/LDH, the photoelectrons transferred from the valence band of LDH (Cu/Fe 3d t2g) to the conduction band of LDH (Cu/Fe 3d eg) could spontaneously migrate onto the conduction band of ND, promoting the separation of photo-induced charges. Thus, the photoelectrons had sufficient time to accelerate the redox cycles of Cu3+/Cu2+ and Fe3+/Fe2+ to photoactivate H2O2 to produce hydroxyl radicals, resulting in excellent photo-Fenton efficiency on MB degradation.