Accelerating photocatalytic hydrogen evolution and pollutant degradation by coupling organic co-catalysts with TiO2

Z-scheme heterojunction g-C3N4-TiO2 reinforced chitosan/poly(vinyl alcohol) film: Efficient and recyclable for fruit packaging

Nanoparticles-loaded bio-based polymers have emerged as a sustainable substitute to traditional oil-based packaging materials, addressing the challenges of limited recyclability and significant environmental impact. However, the functionality and efficiency of nanoparticles have a significant impact on the application of bio-based composite films. Herein, graphitic carbon nitride (g-C3N4) and titanium dioxide (TiO2) coupled photocatalyst (g-C3N4-TiO2) was prepared by one-step calcination and introduced into chitosan (CS) and polyvinyl alcohol (PVA) solution to fabricate g-C3N4-TiO2/CS/PVA green renewable composite film via solution casting method. The results demonstrated the successful preparation of a Z-scheme heterojunction g-C3N4-TiO2 with exceptional photocatalytic activity. Furthermore, the incorporation of heterojunction enhanced mechanical properties, water barrier, and ultraviolet (UV) resistance properties of the fresh-keeping film. The g-C3N4-TiO2/CS/PVA composite film exhibited superior photocatalytic antibacterial preservation efficacy on strawberries under LED light, with a prolonged preservation time of up to 120 h, when compared to other films such as polyethylene (PE), CS/PVA, g-C3N4/CS/PVA, and TiO2/CS/PVA. In addition, the composite film has good recyclability and renewability. This work is expected to have great potential for low-cost fruit preservation and sustainable packaging, which also contributes to environmental protection.

Interfacial molecular regulation of TiO2 for enhanced and stable cocatalyst-free photocatalytic hydrogen production

On the basis of the inherent property limitations of commercial P25-TiO₂, many surface interface modification methods have attracted substantial attention for further improving the photocatalytic properties. However, current strategies for designing and modifying efficient photocatalysts (which exhibit complicated manufacturing processes and harsh conditions) are not efficient for production that is low cost, is nontoxic, and exhibits good stability; and therefore restrict practical applications. Herein, a facile and reliable method is reported for in situ amine-containing silane coupling agent functionalization of commercial P25-TiO₂ by covalent surface modification for constructing a highly efficient photocatalyst. As a consequence, a high efficiency of H₂ evolution was achieved for TiO₂-SDA with 0.95 mmol h^-1 g^-1 (AQE ∼45.6 % at 365 nm) under solar light irradiation without a co-catalyst. The amination modification broadens the light absorption range of the photocatalyst, inhibits the binding of photogenerated carriers, and improves the photocatalytic efficiency; which was verified by photochemical properties and DFT theoretical calculations. This covalent modification method ensures the stability of the photocatalytic reaction. This work provides an approach for molecularly modified photocatalysts to improve photocatalytic performance by covalently modifying small molecules containing amine groups on the photocatalyst surface.

Preparation and Photocatalytic Properties of Anatase TiO2 with Hollow Hexagonal Frame Structure

Titanium dioxide (TiO2) has been widely used to solve energy and environmental pollution problems due to its excellent properties. In this study, the precursor (HTiOF3) with a spherical structure composed of hexagonal prisms was prepared via a simple solvothermal method using tetrabutyl titanate, hydrofluoric acid, glacial acetic acid and isopropanol as raw materials. Then, the calcination time and temperature of the precursor were controlled to prepare anatase TiO2 with different morphologies, and the photocatalytic performance of the prepared catalysts was studied. When the precursor was calcined at 600 °C for 7 h, the prepared TiO2 had a unique hexagonal framework structure and exhibited excellent photocatalytic performance. The degradation rate of the RhB solution was 98.58% at 40 min and the rate of hydrogen evolution was 2508.12 μmol g−1 h−1.

One-Step Hydrothermal Synthesis of Nanostructured MgBi2O6/TiO2 Composites for Enhanced Hydrogen Production

A highly efficient MgBi2O₆ (MBO)/TiO₂ heterostructured photocatalyst for the evolution of H₂ was successfully prepared using a one-step hydrothermal method. The phase structure, microstructure and optical properties of the MBO/TiO₂ composites were investigated by various experimental techniques. A series of H₂ production experiments were performed under visible light. The measured results indicated that the nanostructured MBO/TiO₂ composite, with a stoichiometric molar ratio of MBO:TiO₂ = 0.2%, displayed the best H₂ production rate of 3413 μmol h⁻¹ g⁻¹. The excellent photocatalytic performance of the obtained composite material was due to the heterojunction formed between MBO and TiO₂, which reduced the charge transfer resistance and accelerated the separation efficiency of the photogenerated electron–hole pairs. The reaction mechanism was also discussed in detail.

Influence of Anatase-Rutile Ratio on Band Edge Position and Defect States of TiO2 Homojunction Catalyst

Removal of toxic air and water dissociation in the environment has become a major challenging issue throughout the world. Mixed phase rutile-anatase titanium dioxide catalysts are very effective in photocatalysis and have been studied extensively. However, the mechanism causing this effect and band alignment of the two phases are not fully understood. Pointing to the issue, we have designed one-dimensional mixed-phase TiO₂ and introduced defects near the valence band. Experimental results showed that band alignment between two phases, up-shift of the band edge, and optimum anatase percentage play a key role in the enhancement of the photocatalytic activity. We predicted shifts in band edge originating from surface electric dipole layer induced by defects.

TiO2thin-walled nanofiber burst tube doped with Fe2O3nanograss for efficient degradation of levofloxacin: effect of precursor

By means of electrospinning combined with impregnation and calcination, the thin-walled TiO₂nano-burst tubes with Fe₂O₃nanograss on the surface were synthesized. The effects of precursor properties and concentration on the morphology, structure and photochemical properties of the prepared nanostructures were studied. Adding K₃[Fe(C₂O₄)₃]·3H₂O into the electrospinning solution as the precursor can not only realize the preparation of nanograss and thin-walled nano-burst tubes, but also achieve better degradation effect than that of FeCl₃. However, the composite prepared by adding 2% K₃[Fe(C₂O₄)₃]·3H₂O has the best synergistic effect, showing the best photoresponse performance and catalytic efficiency, and achieving the degradation of 94% levofloxacin within 90 min. In this study, a simple and economical synthesis strategy was proposed, that is, TiO₂/Fe₂O₃heterostructure with special structure was prepared by introducing a small amount of acid or metallic acid salts into the precursor as a high-performance photocatalyst.

Preparation of Magnetically Recoverable MPCTP-Ag Composite Nanoparticles and Their Application as High-Performance Catalysts

In the present research, magnetically recyclable polyphosphazene (PCTP)/Ag (MPCTP-Ag) nanoparticles are prepared by a green path, in which PCTP was used to modify Fe₃O₄ nanoparticles and provide nucleation sites for the reduction of Ag nanoparticles. The prepared MPCTP-Ag nanoparticles were characterized by TEM, SEM, EDS, BET, XRD, vibrating sample magnometry, XPS, and TGA analysis. The catalytic performances of the MPCTP-Ag nanoparticles for the degradation of 4-nitrophenol (4-NP), methylene blue (MB), methyl orange (MO), and their mixtures in the presence of NaBH₄ were studied. The main factors affecting the catalytic performance, including temperature, reactant concentration, and catalyst dosage, were investigated. The results showed that the MPCTP-Ag nanoparticles exhibited excellent catalytic activity for the degradation of all three targeted organic contaminants (4-NP, MB, and MO). Moreover, the product retains its catalytic activity after being reused five times by magnetic separation. The results showed that MPCTP-Ag composite nanoparticles were efficient recyclable magnetic nanocatalysts with promising application in environment protection.

Efficient non-metal based conducting polymers for photocatalytic hydrogen production: comparative study between polyaniline, polypyrrole and PEDOT

Incorporation of conducting polymers (CPs) with TiO2 is considered a promising pathway toward the fabrication of highly efficient non-metal based photocatalysts. Herein, we report the fabrication of TiO2@polyaniline, TiO2@polypyrrole, and TiO2@poly(3,4-ethylenedioxythiophene) photocatalyst heterostructures via the facile wet incipient impregnation method. The mass ratios of CPs in the composites were optimized. The structure, morphology, optical and surface texture of the samples were characterized by XRD, TEM, TGA, DRS, and N2-physisorption techniques. The TiO2@2PEDOT, TiO2@2PPy, and TiO2@5PAn composites were found to exhibit the highest H2 evolution rate (HER) of 1.37, 2.09, and 3.1 mmol h-1 g-1, respectively. Compared to bare TiO2, the HER was significantly enhanced by 16, 24, and 36-fold, respectively. Photoelectrochemical measurements (CV, CA and EIS) were conducted, to evaluate the photoelectric properties of the synthesized composites and assist in understanding the photocatalytic mechanism. The deposition method plays a key-role in forming the photocatalyst/CP interface. This simple impregnation route was found to provide an excellent interface for charge transfer between composite components compared to chemisorption and in situ polymerization methods. This study sheds light on the promising effect of CP incorporation with semiconductor photocatalysts, as a cheap and efficient matrix, on photocatalytic performance.

Photocatalytic degradation of methylene blue under UV and visible light by brookite–rutile bi-crystalline phase of TiO2

Brookite–rutile bi-crystalline phase of TiO₂ were synthesized and applied for the degradation of methylene blue under UV and visible light irradiation by photocatalytic reaction.

Construction of TiO2-MnO2 0D-2D nanostructured heterojunction for enhanced photocatalytic hydrogen production

The low transfer efficiency and high recombination loss of photo-induced carriers in TiO2 are significant issues that hinder its photocatalytic activity. Herein, TiO2 nanoparticles (∼5 nm) were loaded on MnO2 nanosheets (40-60 nm) to form TiO2-MnO2 nanostructured heterojunction (0D-2D nanostructure unit), possessing a high specific surface area. The separation/transfer efficiency of photocarriers and the solar absorptivity of TiO2-MnO2 were improved, thus enhancing solar energy conversion efficiency. The enhanced transfer efficiency of carriers is associated with the 2D network of MnO2 and abundant oxygen vacancies serving as media for electron transport. The enhanced visible absorption and reduced recombination should be attributed to the narrowed bandgap and modified energy band structure. The photocurrent of TiO2-MnO2 increased obviously and the H2 production rate increased to 0.38 mmol g-1 h-1, compared with that of pure TiO2 (0.25 mmol g-1 h-1). The enhanced photocatalytic properties are also associated with the excellent water oxidation kinetics caused by MnO2 nanosheets.

The preparation of Al2O3/g-C3N4 composites in aluminum–water self-assembly system and its improved photocatalytic properties

The aluminum alloy is used as the aluminum source, together with melamine and cyanuric acid, in a water reaction system to obtain the precursor of Al2O3/g-C3N4 through self-assembly in one step, and then calcined to obtain the Al2O3/g-C3N4 composite photocatalytic material.

Improving Glycerol Photoreforming Hydrogen Production Over Ag2O-TiO2 Catalysts by Enhanced Colloidal Dispersion Stability

Solar-driven photocatalytic reforming of biomass-derived resources for hydrogen production offers a sustainable route toward the generation of clean and renewable fuels. However, the dispersion stability of the catalyst particles in the aqueous phase hinders the efficiency of hydrogen production. In this work, a novel method of mixing Ag2O-TiO2 photocatalysts with different morphologies was implemented to promote colloidal dispersion stability, thereby improving hydrogen production performance. A series of Ag2O-TiO2 nanoparticles with different morphologies were synthesized, and their dispersion stabilities in aqueous phase were investigated individually. Two types of Ag2O-TiO2 particles with different morphologies under certain proportions were mixed and suspended in glycerol aqueous solution without adding any dispersant for enhancing dispersion stability while reacting. From the results, photocatalytic hydrogen production was found to be strongly correlated to colloidal dispersion stability. The mixed suspension of Ag2O-TiO2 nanosphere and nanoplate achieved an excellent colloidal dispersion stability without employing any additives or external energy input, and the photoreforming hydrogen production obtained from this binary component system was around 1.1-2.3 times higher than that of the single-component system. From the calculated hydrogen production rate constants between continuous stirring and the binary system, there was only <6% difference, suggesting an efficient mass transfer of the binary system for photoreforming hydrogen production. The proposed method could provide some inspiration to a more energy-efficient heterogeneous catalytic hydrogen production process.

Synthesis and degradation kinetics of TiO2/GO composites with highly efficient activity for adsorption and photocatalytic degradation of MB

Poriferous TiO₂/GO (denoted as TGO-x%) photocatalysts with ultrathin grapheme oxide (GO) layer were prepared by a hydrothermal method, the adsorption and photocatalytic degradation and its kinetics about Methylene blue(MB) were studied systematically. All the TGO-x% showed improved adsorption and photodegradation performance. TGO-25% had excellent adsorptivity while TGO-20% exhibit the highest visible light photocatalytic degradation activity. The adsorption capacity for TGO-25% was 20.25 mg/g_catalyst along with the k₁ was about 0.03393 min·g_catalyst/mg, this enhancement was mainly owing to the strong adsorption capacity of GO and the stacking structure of sheets and nanoparticles. GO sheets prevented the agglomeration of TiO₂ particles and TiO₂ nanoparticles also prevented the agglomeration of GO sheets, which could provides greater surface area. Besides, the remarkably superior photodegradation activity of TiO₂/GO composites is mainly attribute to the strong absorption of visible light and the effective charge separation revealed by the photoluminescence, the total removal rate of MB is 97.5% after 35 min adsorption and 140 min degradation, which is 3.5 times higher than that of TiO₂.

Facile in-situ growth of Ag/TiO2 nanoparticles on polydopamine modified bamboo with excellent mildew-proofing

Bamboo with the outstanding properties, such as good mechanical strength, fast growth rate and low growth cost, is considered as one of utilitarian structural nature materials. But bamboo is easy to get mildewed resulting in disfiguration and fungi corrosion. In this work, a facile method was developed to improve the mildew-proofing capability of bamboo. Mussel-inspired polydopamine (PDA) with biomimetic adhesion function and highly active functional groups was employed to immobilize highly-dispersed Ag and TiO₂ nanoparticles on the surface of bamboo via an in-situ growth method. Integrating the uniform PDA coating, photocatalytic function of TiO₂ nanoparticles and bactericidal role of Ag nanoparticles, the mildew-proofing capability of bamboo is enhanced significantly. The results show a non-covalent interaction is more likely to account for the binding mechanism of PDA to bamboo. And the prepared bamboo samples show good photocatalytic performance and have excellent resistance leachability. Meanwhile, the mildew-proofing property of prepared bamboo sample was greatly improved.

pH-Controlled photocatalytic abatement of RhB by an FeWO4/BiPO4 p–n heterojunction under visible light irradiation

The novel FeWO₄/BiPO₄ heterojunction generates an inner electric field to promote electron–hole separation efficiency and is a proficient photocatalyst.