Organic amine surface modified one-dimensional CdSe0.8S0.2-diethylenetriamine/two-dimensional SnNb2O6 S-scheme heterojunction with promoted visible-light-driven photocatalytic CO2 reduction

Unveiling the potential of step-scheme and Type II photocatalysts in dinitrogen reduction to ammonia

Innovative photocatalytic systems designed to enhance efficiency of nitrogen fixation processes, specifically focusing on sustainable ammonia (NH3) production strategies via dinitrogen (N2) reduction into ammonia (NH3). This process is critical for sustainable agriculture and energy production. To improve photocatalyst activity, catalyst stability and reusability, reduction efficiency due to electron/hole recombination, and light-absorption efficiency has drawn extensive attention. Herein, a broad range of research progress and comprehensive overview of step-scheme/type-II heterojunctions focusing on dinitrogen (N2) reduction are reviewed with focus on general synthesis, characterization by their unique charge separation mechanisms that improve light absorption and electron-hole pair utilization. The review highlights recent advancements in material design, which have shown promising results in enhancing photocatalytic activity under visible light irradiation. A significant portion of the review delves into the underlying mechanisms which these heterojunctions operate. Despite the promising literature results, several challenges facing this field, such as scalability, stability of photocatalysts, and environmental impact under operational conditions were also discussed. In summary, this review provides valuable insights into the potential of step-scheme/type-II photocatalysts for dinitrogen reduction to ammonia. The need for interdisciplinary approaches to overcome existing challenges such as incorporation of piezoelectric biomaterials and unlocking the full potential of these materials in addressing global nitrogen demands sustainably are highlighted, outlining future directions for further research and innovations.

In situ construction of S-scheme heterojunctions between BiOCl and Bi-MOF for enhanced photocatalytic CO2 reduction and pollutant degradation

Recently, photocatalytic technology has been widely used as a sustainable method to address environmental pollution issues. Herein, BiOCl/Bi-MOF (BOC/Bi-MOF) based semiconductor photocatalysts with S-scheme heterojunction were fabricated by an in situ growth method, and the photocatalytic activity of the materials was explored for CO2 reduction and pollutant degradation. As confirmed by density functional theory calculations and physiochemical characterizations, the established S-scheme heterojunction confers enhanced carrier separation efficiency and retention of redox capability to the BOC/Bi-MOF. Through an improved combination of charge separation and surface reactions, the prepared BOC/Bi-MOF efficiently reduces CO2 solely to CO. The heterojunction as catalyst is more durable and effective than any of its single component. The CO evolution rate of the optimized composite catalyst was 7.66 and 33.10 times of those of BiOCl and Bi-MOF, respectively. In addition, BOC/Bi-MOF exhibits a high efficiency in the photocatalytic degradation of the pollutant rhodamine B (RhB) in aqueous environments, and the pollutant was completely removed within 20 min. Due to the generation of interfacial potential differences, the internal electric field (IEF) generation at heterogeneous interfaces facilitates the separation and transfer of photogenic charges. This work demonstrated a practical and effective route for in situ growth of S-scheme heterojunctions with high efficiencies in CO2 reduction and RhB degradation.

Improved solar-driven water purification using an eco-friendly and cost-effective aerogel-based interfacial evaporator with exceptional photocatalytic capabilities

As a promising solution to address the global challenge of freshwater scarcity, solar-powered interfacial steam generation has undergone notable advancements. This study introduces a novel solar-driven interfacial evaporation membrane (ZnIn2S4@SiO2/ACSA, ZSAS) comprising a ZnIn2S4@SiO2 composite and a black sodium alginate aerogel infused with activated carbon. The ZSAS membrane demonstrates exceptional light absorption and thermal insulation, leading to elevated surface temperatures and reduced heat dissipation into the bulk water. Furthermore, the incorporation of AC reinforces the mechanical properties of the ZSAS membrane and enhances the water purification performance. These collective features result in an impressive evaporation rate of 1.485 kg m-2 h-1 and a high photothermal conversion efficiency of 91.2% under 1 sun irradiation for the optimal ZSAS membrane. Moreover, the optimal ZSAS membrane can effectively remove salts, heavy metal ions, and organic pollutants, benefitting from its superior evaporation separation effect and the photocatalytic properties of the ZnIn2S4@SiO2 composite.

Study on synergistic effects of 4f levels of erbium and black phosphorus/SnNb2O6 heterostructure catalysts by multiple spectroscopic analysis techniques

Lanthanide single atom modified catalysts are rarely reported because the roles of lanthanide in photocatalysis are difficult to explain clearly. Based on the construction of Er single atom modified black phosphorus/SnNb2O6 (BP/SNO) heterojunctions, the synergistic effect of 4f levels of Er and heterostructures was studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations. According to the Judd-Ofelt theory of lanthanide ions, the CO2 photoreduction test under single wavelength excitation verifies that the 4F7/2/2H11/2 → 4I15/2 emissions of Er in BPEr/SNOEr can be more easily absorbed by SNO and BP, further proving the role of the 4f levels. As a result, the CO and CH4 yields of BPEr/SNOEr-10 under visible light irradiation are 10.7 and 10.1 times higher than those of pure BP, respectively, and 3.4 and 1.5 times higher than those of SNO. The results of DFT calculations show that the Er single atoms can cause surface reconstruction, regulate the active sites of BP, and reduce the energy change value in the key steps (CO2* + H+ + e- → COOH* and COOH* → CO* + H2O). This work provides novel insights into the design of lanthanide single atom photocatalysts for CO2 reduction.

Fabricated ZnO@ZnIn2S4 S-scheme heterojunction photocatalyst for enhanced electron-transfer and CO2 reduction

Step-scheme (S-scheme) heterojunctions can efficiently promote the separation of photogenerated carriers while maintaining the strong oxidation/reduction ability of photocatalysts; thus, research attention on S-scheme heterojunctions is increasing year by year. In this study, the S-scheme ZnO@ZnIn2S4 (ZnO@ZIS) heterojunction was prepared successfully. Then, electron spin resonance (ESR) characterization was applied to prove the successful construction of the S-scheme heterojunction. Photoluminescence (PL), time-resolved photoluminescence (TRPL), and photoelectrochemical experiments have demonstrated efficient interfacial charge transport in ZnO@ZIS. Finally, the mechanism of CO2 activation and electron transport was investigated by in situ Fourier transform infrared spectroscopy (FT-IR) and discrete Fourier transform (DFT) calculation analysis. The 40-ZnO@ZIS composite showed the best activity under light, and its CO and CH4 yields reached 39.76 and 3.92 μmol∙g-1∙h-1, respectively. This study provides a solution for optimizing the photocatalytic reduction activity of semiconductor photocatalysts by constructing S-scheme heterojunction materials to improve the CO2 reduction capacity.

Synergistic effect of excellent carriers separation and efficient high level energy electron utilization on Bi3+-Ce2Ti2O7/ZnIn2S4 heterostructure for photocatalytic hydrogen production

The separation of photogenerated carriers and the efficient utilization of high-level energy electrons (HLEEs) are the key processes for improving the performance of photocatalysts. Herein, Ce2Ti2O7/ZnIn2S4 (CTOZIS) and Bi3+-doped Ce2Ti2O7/ZnIn2S4 (BCTOZIS) photocatalyst were successfully synthesized through hydrothermal method. The photocatalytic hydrogen production of CTOZIS and BCTOZIS was 1233.7 μmol g-1 and 4168.5 μmol g-1 under visible light irradiation (λ ≥ 420 nm) within 5 h, which was 2.3 and 7.6 times than that of pure ZnIn2S4, respectively. X-ray photoelectron spectroscopy, photoluminescence spectroscopy and electrochemical characterization demonstrated that after Bi3+ doping, the electron-hole pairs recombination of BCTOZIS was inhibited, which may be ascribed to the establishment of a Z-scheme heterojunction and the presence of oxygen vacancy and Ce4+/Ce3+ redox center. The doping of Bi3+ resulted in the adjustment of the valence band position of Ce2Ti2O7 from 1.98 V to 1.92 V. This adjustment enabled direct transfer of HLEEs generated in Ce2Ti2O7 to the conduction band of ZnIn2S4 for hydrogen production with a wavelength below 423 nm. The synergistic effect of conventional Z-scheme electron transfer and the unique utilization of HLEEs boosted the photocatalytic performance of BCTOZIS. This study affords an innovative insight for designing visible-light-driven photocatalysts with high photocatalytic activity.

Sn-based materials in photocatalysis: A review

Development and the application of Sn-based materials have become more prevalent in recent years due to concerns regarding the energy crisis, environmental pollution, and the urgent need of constructing inexpensive and highly effective photocatalysis. The recent advancement in Sn-based materials for efficient photocatalysts, such as Sn alloys, Sn oxides, Sn sulfides, Sn selenides, Sn niobates, Sn tantalites, and Sn tungstates, is summarized in this study. Several design ideas for increasing the photoactivity of Sn-based materials in various photocatalytic applications are emphasized. In addition, we considered their present applications in energy generation (H2 evolution, CO2 reduction, and N2 fixation) and environmental remediation (air purification and wastewater treatment). As a result, the current review will deepen the reader's understanding of the properties and potential uses of Sn-based materials in photocatalysis. Hence, this paper will serve as a guide in promoting the domain of Sn-based materials for future photocatalytic technologies.

Oxygen Vacancy Induced Atom-Level Interface in Z-Scheme SnO2/SnNb2O6 Heterojunctions for Robust Solar-Driven CO2 Conversion

The modulation of Z-scheme charge transfer is essential for efficient heterostructure toward photocatalytic CO₂ reduction. However, constructing a compact hetero-interface favoring the Z-scheme charge transfer remains a great challenge. In this work, an interfacial Nb-O-Sn bond and built-in electric field-modulated Z-scheme O_v-SnO₂/SnNb₂O₆ heterojunction was prepared for efficient photocatalytic CO₂ conversion. Systematic investigations reveal that an atomic-level interface is constructed in the O_v-SnO₂/SnNb₂O₆ heterojunction. Under simulated sunlight irradiation, the obtained O_v-SnO₂/SnNb₂O₆ photocatalyst exhibits a high CO evolution rate of 147.4 μmol h^-1 g^-1 from CO₂ reduction, which is around 3-fold and 3.3-fold of SnO₂/SnNb₂O₆ composite and pristine SnNb₂O₆, respectively, and favorable cyclability by retaining 95.8% rate retention after five consecutive tests. As determined by electron paramagnetic resonance spectra, in situ Fourier transform infrared spectra, and density functional theory calculations, Nb-O-Sn bonds and built-in electric field induced by the addition of oxygen vacancies jointly accelerate the Z-scheme charge transfer for enhanced photocatalytic performance. This work provides a promising route for consciously modulating Z-scheme charge transfer by atomic-level interface engineering to boost photocatalytic performance.

Self-Assembly of Bi2Sn2O7/β-Bi2O3 S-Scheme Heterostructures for Efficient Visible-Light-Driven Photocatalytic Degradation of Tetracycline

Fabrication of S-scheme heterojunctions with enhanced redox capability offers an effective approach to address environmental remediation. In this study, high-performance Bi₂Sn₂O₇/β-Bi₂O₃ S-scheme heterojunction photocatalysts were fabricated via the in situ growth of Bi₂Sn₂O₇ on β-Bi₂O₃ microspheres. The optimized Bi₂Sn₂O₇/β-Bi₂O₃ (BSO/BO-0.4) degradation efficiency for tetracycline hydrochloride was 95.5%, which was 2.68-fold higher than that of β-Bi₂O₃. This improvement originated from higher photoelectron-hole pair separation efficiency, more exposed active sites, excellent redox capacity, and efficient generation of ^·O₂ ^- and ^·OH. Additionally, Bi₂Sn₂O₇/β-Bi₂O₃ exhibited good stability against photocatalytic degradation, and the degradation efficiency remained >89.7% after five cycles. The photocatalytic mechanism of Bi₂Sn₂O₇/β-Bi₂O₃ S-scheme heterojunctions was elucidated. In this study, we design and fabricate high-performance heterojunction photocatalysts for environmental remediation using S-scheme photocatalysts.

2D MoS2/BiOBr van der Waals heterojunctions by liquid-phase exfoliation as photoelectrocatalysts for hydrogen evolution

As a semiconductor used for the photocatalytic hydrogen evolution reaction (HER), BiOBr has received intensive attention in recent years. However, the high recombination of photoexcited charge carriers results in poor photocatalytic efficiency. The combination with other photoactive semiconductors might represent a valuable approach to deal with the intrinsic limitations of the material. Given that BiOBr has a 2D structure, we propose a simple liquid-phase exfoliation method to peel BiOBr microspheres into few-layer nanosheets. By tuning the weight ratio between the precursors, we prepare a series of 2D MoS₂/BiOBr van der Waals (vdW) heterojunctions and study their behaviour as (photo)electrocatalysts for the HER, finding dramatic differences as a function of weight composition. Moreover, we found that pristine 2D BiOBr and the heterojunctions, with the exception of the 1% MoS₂/BiOBr composition, undergo photocorrosion, with BiOBr being reduced to metallic Bi. These findings provide useful guidelines to design novel 2D material-based (photo)electrocatalysts for the production of sustainable fuels.

PM2.5-mediated photochemical reaction of typical toluene in real air matrix with identification of products by isotopic tracing and FT-ICR MS

The sight into photoconversion of toluene, a ubiquitous typical pollutant, attentively by the involvement of PM2.5 in the real air environment is crucial for controlling haze pollution. Compared with the large-size PM2.5 on normal day (PM2.5-ND), the PM2.5 on haze day (PM2.5-HD) formed of small particle agglomerates featured greater oxidation capability, evidenced by the valence distribution of sulfur species. Notably, PM2.5-HD had abundant O₂^-• and •OH and participated in the photochemical reaction of toluene, giving it a greater toluene conversion with a first-order kinetic rate constant of 0.4 d^-1 on haze day than on normal day (0.2 d^-1). During the toluene photoconversion, isotopic labelling traced small molecules including benzene and newfound pentane, ethylbenzene, 1,3,8-p-menthatriene and 4-methyl-1-pentanone benzene that could be formed by methyl breakage, ring opening, fragmentation reforming and addition reaction of toluene. Given ADMET properties, 1,3,8-p-menthatriene was assigned high priority since it had poor metabolism, low excretion and severe toxicity, while benzene and 4-methyl-1-pentanone benzene should also be noticeable. FT-ICR MS results indicated that toluene could create multiple macromolecular products that are more sensitive to SOA generation in haze air matrix with broader carbon number and O/C, more oxygenated substitution with CHO/CHON occupying by 81.4%, lower DBE_average at 4.66 and higher OS_C‾ at -1.60 than normal air matrix. Accordingly, a photochemical reaction mechanism for toluene in real air atmosphere was proposed. The stronger oxidation property of PM2.5 not only facilitated toluene to generate small molecules but also boosted the conversion of intermediates to oxygenated macromolecular products, contributing to the formation of SOA.

Chemically Bonded Plasmonic Triazole-Functionalized Au/Zeolitic Imidazole Framework (ZIF-67) for Enhanced CO2 Photoreduction

The design of functionalized metallic nanoparticles is considered an emerging technique to ensure the interaction between metal and semiconductor material. In the literature, this interface interaction is mainly governed by electrostatic or van der Waals forces, limiting the injection of electrons under light irradiation. To enhance the transfer of electrons between two compounds, close contact or chemical bonding at the interface is required. Herein, a new approach was reported for the synthesis of chemically bonded plasmonic Au NPs/ZIF-67 nanocomposites. The structure of ZIF-67 was grown on the surface of functionalized plasmonic Au NPs using 1H-1,2,4-triazole-3-thiol as the capping agent, which acted as both stabilizer of Au nanoparticles and a molecular linker for ZIF-67 formation. As a result, the synthesized material exhibited outstanding photocatalytic CO₂ reduction with a methanol production rate of 2.70 mmol h^-1  g^-1 _cat under sunlight irradiation. This work emphasizes that the diligent use of capping agents, with suitable functional groups, could facilitate the formation of intimate heterostructure for enhanced photocatalytic CO₂ reduction.

Designing a 0D/1D S-Scheme Heterojunction of Cadmium Selenide and Polymeric Carbon Nitride for Photocatalytic Water Splitting and Carbon Dioxide Reduction

Constructing photocatalysts to promote hydrogen evolution and carbon dioxide photoreduction into solar fuels is of vital importance. The design and establishment of an S-scheme heterojunction system is one of the most feasible approaches to facilitate the separation and transfer of photogenerated charge carriers and obtain powerful photoredox capabilities for boosting photocatalytic performance. Herein, a zero-dimensional/one-dimensional S-scheme heterojunction composed of CdSe quantum dots and polymeric carbon nitride nanorods (CdSe/CN) is created and constructed via a linker-assisted hybridization approach. The CdSe/CN composites exhibit superior photocatalytic activity in water splitting and promoted carbon dioxide conversion performance compared with CN nanorods and CdSe quantum dots. The best efficiency in photocatalytic water splitting (10.2% apparent quantum yield at 420 nm irradiation, 20.1 mmol g−1 h−1 hydrogen evolution rate) and CO2 reduction (0.77 mmol g−1 h−1 CO production rate) was achieved by 5%CdSe/CN composites. The significantly improved photocatalytic reactivity of CdSe/CN composites primarily originates from the emergence of an internal electric field in the zero-dimensional/one-dimensional S-scheme heterojunction, which could greatly improve the photoinduced charge-carrier separation. This work underlines the possibility of employing polymeric carbon nitride nanostructures as appropriate platforms to establish highly active S-scheme heterojunction photocatalysts for solar fuel production.