Lignin valorization toward value-added chemicals and fuels via electrocatalysis: A perspective

Hydrodeoxygenation of Lignin-Based Compounds over Ruthenium Catalysts Based on Sulfonated Porous Aromatic Frameworks

Bifunctional catalysts are a major type of heterogeneous catalytic systems that have been widely investigated for biomass upgrading. In this work, Ru-catalysts based on sulfonated porous aromatic frameworks (PAFs) were used in the hydrodeoxygenation (HDO) of lignin-derived compounds: guaiacol, veratrole, and catechol. The relationship between the activity of metal nanoparticles and the content of acid sites in synthesized catalysts was studied. Herein, their synergy was demonstrated in the Ru-PAF-30-SO3H/5-COD catalyst. The results revealed that this catalytic system promoted partial hydrogenation of lignin-based compounds to ketones without any further transformations. The design of the Ru-PAF-30-SO3H/5-COD catalytic system opens a promising route to the selective conversion of lignin model compounds to cyclohexanone.

Multisite photocatalytic depolymerization of lignin model compound utilizing full-spectrum light over magnetic microspheres

Photocatalytic depolymerization is a high value-added approach for utilization of lignin. In this study, magnetic microspheres of FeCoRu@SiO2-TiO2 were synthesized by a co-precipitation method. Doping with CoOx and RuOx was used to improve the response to visible light, and doping with TiO2 was used to improve the response to ultraviolet light (λ < 380 nm). The lignin model compound depolymerization rate was >90%. The electron paramagnetic resonance results showed that the reaction occurred in two steps (aerobic phase and oxygen-free phase). Most of the O2- was produced in the first step by cleavage of C-O bonds. The second step was inhibited in an oxygen-free atmosphere. This research provides a valid method for enhancing the photocatalytic properties using full-spectrum light and exploring the lignin photocatalytic depolymerization mechanism. Further research is required to develop the catalyst properties and performance to produce radicals.

Electrocatalytic valorization of lignocellulose-derived aromatics at industrial-scale current densities

Electrocatalytic hydrogenation of lignocellulosic bio-oil to value-added chemicals offers an attractive avenue to use the increasing intermittent renewable electricity and biomass-derived feedstocks. However, to date the partial current densities to target products of these reactions are lower than those needed for industrial-scale productivity, which limits its prospects. Here we report a flow-cell system equipped with a Rh diffusion electrode to hydrogenate lignocellulose-derived aromatic monomers, such as furans and lignin monomers, to value-added chemicals. We achieve high faradaic efficiencies up to 64% at industrial-scale current densities of 300-500 mA cm-2, representing high productivities to target products. A screening of electrocatalysts indicates that only by highly-electrolyte-permeable Rh diffusion electrodes are we able to unite current density with faradaic efficiency. We apply in-situ infrared reflection-absorption spectroscopy to investigate the electrode-potential-dependent reaction pathways and intermediates, confirming a wide potential window for efficient electrocatalytic hydrogenation of lignocellulose-derived aromatics to target products.

Selective electrocatalytic hydrogenation of lignocellulose-derived 5-hydroxymethylfurfural with superior productivities

Recently, valorization of biomass to value-added chemicals has drawn increasing attention due to carbon neutrality and sustainability. 5-Hydroxymethylfurfural is an important lignocellulose-derived biomass molecule. Herein, we have demonstrated the efficient electrocatalytic hydrogenation of 5-hydroxymethylfurfural to value-added 2,5-bis(hydroxymethyl)furan. An optimized electrolyzer with a highly electrolyte-permeable Pd cathode well balanced the selectivity, faradaic efficiency, and productivity. We have achieved high selectivity (97%) and faradaic efficiency (72%) at 50 mA cm-2 current density, and a record high productivity of 0.923 mmol cm-2·h-1 at 100 mA cm-2 current density, ∼2 times advanced compared with the best productivity in prior reports. We applied in situ infrared reflection-absorption spectroscopy to investigate the electrode-potential-dependent reaction pathways and mechanism, confirming that the highly selective hydrogenation of HMF is due to the tilted adsorption geometry through carbonyl group bonding to the surface of electrode. This work offers an opportunity for the sustainable electrocatalytic valorization of renewable lignocellulose-derived biomass with superior productivities approaching industrial level.

Decoration of sodium carboxymethylcellulose gel microspheres with modified lignin to enhanced methylene blue removal

The introduction of active groups from biomass is currently the most promising alternative method for increasing the adsorption effect of dyes. In this study, modified aminated lignin (MAL) rich in phenolic hydroxyl and amine groups was prepared by amination and catalytic grafting. The factors influencing the modification conditions of the content of amine and phenolic hydroxyl groups were explored. Chemical structural analysis results confirmed that MAL was successfully prepared using a two-step method. The content of phenolic hydroxyl groups in MAL significantly increased to 1.46 mmol/g. MAL/sodium carboxymethylcellulose (NaCMC) gel microspheres (MCGM) with enhanced methylene blue (MB) adsorption capacity owing to the formation of a composite with MAL were synthesized by a sol-gel process followed by freeze-drying and using multivalent cations Al³⁺ as cross-linking agents. In addition, the effects of the MAL to NaCMC mass ratio, time, concentration, and pH on the adsorption of MB were explored. Benefiting from a sufficient number of active sites, MCGM exhibited an ultrahigh adsorption capacity for MB removal, and the maximum adsorption capacity was 118.30 mg/g. These results demonstrated the potential of MCGM for wastewater treatment applications.

Simultaneous Oxidative Cleavage of Lignin and Reduction of Furfural via Efficient Electrocatalysis by P-Doped CoMoO4

Electrochemical oxidative lignin cleavage and coupled 2-furaldehyde reduction provide a promising approach for producing high-value added products. However, developing efficient bifunctional electrocatalysts with noble-metal-like activity still remains a challenge. Here, an efficient electrochemical strategy is reported for the selective oxidative cleavage of C_α -C_β bonds in lignin into aromatic monomers by tailoring the electronic structure through P-doped CoMoO₄ spinels (99% conversion, highest monomer selectivity of 56%). Additionally, the conversion and selectivity of 2-furaldehyde reduction to 2-methyl furan reach 87% and 73%, respectively. In situ Fourier transform infrared and density functional theory analysis reveal that an upward shift of the E_d upon P-doping leads to an increase in the antibonding level, which facilitates the C_α -C_β adsorption of the lignin model compounds, thereby enhancing the bifunctional electrocatalytic activity of the active site. This work explores the potential of a spinel as a bifunctional electrocatalyst for the oxidative cracking of lignin and the reductive conversion of small organic molecules to high-value added chemicals via P-anion modulation.

Promoted electrocatalytic hydrogenation of furfural in a bi-phasic system

The promoted electrocatalytic hydrogenation of biomass-derived furfural to 2-methylfuran is for the first time identified in a water/oil bi-phasic system, in which the oil phase can quickly separate hydrophobic products from the electrode/electrolyte interfaces, resulting in a beneficial equilibrium toward hydrodeoxygenation.

Successive Cleavage and Reconstruction of Lignin β-O-4 Models and Polymer to Access Quinoxalines

The construction of N-heterocyclic compounds from lignin remains a great challenge due to the complex lignin structure and the involvement of multiple steps, including the cleavage of lignin C-O linkages and the formation of heterocyclic aromatic rings. Herein, the first example of KOH mediated sustainable synthesis of quinoxaline derivatives from lignin β-O-4 model compounds in a one-pot fashion under transition-metal-free conditions has been achieved. Mechanistic studies suggested that this transformation includes highly coupled cascade steps of cleavage of C-O bonds, dehydrative condensation, sp³ C-H bond oxidative activation, and intramolecular dehydrative coupling reaction. With this protocol, a wide range of functionalized quinoxalines, including an important drug compound AG1295, were synthesized from lignin β-O-4 model compounds and β-O-4 polymer, showcasing the application potential of lignin in pharmaceutical synthesis.

The Practical Utility of Imidazolium Hydrogen Sulfate Ionic Liquid in Fabrication of Lignin-Based Spheres: Structure Characteristic and Antibacterial Activity

In this study, lignin-based spherical particles (Lig-IL) with the use of 1-(propoxymethyl)-1H-imidazolium hydrogen sulfate were prepared in different biopolymer and ionic liquid (IL) weight ratios. The application of IL during the preparation of spherical particles is an innovative method, which may be beneficial for further applications. The particles were obtained with the use of the soft-templating method and their chemical, structural and morphological characterization was performed. The spherical shape of products and their size (91–615 nm) was confirmed with the use of scanning electron microscopy (SEM) images and the particle size distribution results. The attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra were analyzed to identify functional groups of all precursors and produced material and it was confirmed, that all materials exhibit characteristic hydroxyl and carboxylic groups, but the presence of carbonyl group was detected. Moreover, the zeta potential analysis was performed to evaluate the electrokinetic behavior of obtained materials. It was confirmed, that all materials are colloidally stable in pH above 4. Produced lignin-based spherical particles were used for evaluation of their antibacterial properties. Particles were tested against Staphylococcus aureus (S. aureus), a gram-positive bacterium, and Escherichia coli (E. coli), a gram-negative one. It was observed, that only the material with the highest addition of IL showed the antibacterial properties against both strains. A reduction of 50% in the number of microorganisms was observed for particles with the addition of hydrogen sulfate ionic liquid in a 1:1 ratio after 1 h. However, all prepared materials exhibited the antibacterial activity against a gram-positive bacterium.

High-Value Chemicals from Electrocatalytic Depolymerization of Lignin: Challenges and Opportunities

Lignocellulosic biomass is renewable and one of the most abundant sources for the production of high-value chemicals, materials, and fuels. It is of immense importance to develop new efficient technologies for the industrial production of chemicals by utilizing renewable resources. Lignocellulosic biomass can potentially replace fossil-based chemistries. The production of fuel and chemicals from lignin powered by renewable electricity under ambient temperatures and pressures enables a more sustainable way to obtain high-value chemicals. More specifically, in a sustainable biorefinery, it is essential to valorize lignin to enhance biomass transformation technology and increase the overall economy of the process. Strategies regarding electrocatalytic approaches as a way to valorize or depolymerize lignin have attracted significant interest from growing scientific communities over the recent decades. This review presents a comprehensive overview of the electrocatalytic methods for depolymerization of lignocellulosic biomass with an emphasis on untargeted depolymerization as well as the selective and targeted mild synthesis of high-value chemicals. Electrocatalytic cleavage of model compounds and further electrochemical upgrading of bio-oils are discussed. Finally, some insights into current challenges and limitations associated with this approach are also summarized.

Structural characterizations of lignins extracted under same severity using different acids

As the vital renewable feedstock originated from carbon-neutral resources, due to prominent aromaticity lignin owns the potential to produce high value-added products. Multi-functional lignin valorization demands efficient lignin extraction at milder conditions to keep its structure intact to substitute petroleum-based reactants. Lignin extraction severity (LES) is considered as the primary factor affecting the structure of extracted lignin and ultimately determines its applications. Except for the LES, the selection of suitable reagents for lignin extraction concerned with specific applications is crucially important. To explore the influence of different reagents, this study focused on lignin extraction employing the commonly used strong acids at the same LES. Four lignin preparations were extracted using 80% aqueous dioxane with the addition of H₂O (L1), HCl, H₂SO₄ and HNO₃ (pH = 1.30 ± 0.01 L2, L3 and L4, respectively). Analytical high-sensitive NMR (³¹P and 2D-HSQC) together with other characterizations (FTIR and GPC) were successfully employed and quantified while unveiling the structural heterogeneity among extracted lignin preparations. At the same LES, different reagents yielded lignin with varying structural characteristics and were potentially suitable for different applications.

In situ construction of self-supporting Ni–Fe sulfide for high-efficiency oxygen evolution

2D nanosheet arrays comprising the self-supporting (Fe,Ni)3S4 composite not only exhibit excellent OER activity but also superior reaction stability due to the combined effect of mesopore-containing 2D nanosheets and the binary metal species.