Environmentally-friendly carbon nanomaterials for photocatalytic hydrogen production

AgBiS2@CQDs/Ti nanocomposite coatings for combating implant-associated infections by photodynamic /photothermal therapy

Biofilm-mediated implant-associated infections are one of the most serious complications of implantation surgery, posing a grave threat to patient well-being. Effectively addressing bacterial infections is crucial for the success of implantation procedures. In this study, we prepared a bismuth sulfide silver@carbon quantum dot composite coating (AgBiS2@CQDs/Ti) on a medical titanium surface by surface engineering design to treat implant-associated infections. The photocatalytic/photothermal activity test results confirmed the excellent photogenerated ROS and photothermal properties of AgBiS2@CQDs/Ti under near-infrared laser irradiation. In vitro antibacterial and in vivo anti-infection experiments showed that the coating combined with photodynamic and photothermal therapies to eradicate bacteria and disrupt mature biofilms under 1064 nm laser irradiation. Consequently, AgBiS2@CQDs/Ti shows promise as an implant coating for treating implant-associated infections post-surgery, thereby enhancing the success rate of implantation procedures. This study also provides a new idea for combating implant-associated infections.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Construction of Type-II Heterojunctions in Crystalline Carbon Nitride for Efficient Photocatalytic H2 Evolution

As an encouraging photocatalyst, crystalline carbon nitride (CCN) exhibits unsatisfactory photocatalytic activity and stability due to its rapid recombination of photo-generative carriers. Herein, high-crystalline g-C3N4 was prepared, including CCN obtained in KCl (K-CCN), LiCl-KCl mixture (Li/K-CCN), and LiCl-NaCl-KCl mixture (Li/Na/K-CCN), via the molten salt strategy using pre-prepared bulk carbon nitride (BCN) as a precursor. The obtained BCN sample was formed by heptazine-based units, which convert into triazine-based units for K-CCN. Heptazine and triazine are two isotypes that co-exist in the Li/K-CCN and Li/Na/K-CCN samples. Compared with BCN and other CCN samples, the as-prepared Li/Na/K-CCN sample exhibited the optimal photocatalytic hydrogen evolution rates (3.38 mmol·g-1·h-1 under simulated sunlight and 2.25 mmol·g-1·h-1 under visible light) and the highest apparent quantum yield (10.97%). The improved photocatalytic performance of the Li/Na/K-CCN sample is mainly attributed to the construction of type-II heterojunction and the institution of the built-in electric field between triazine-based CCN and heptazine-based BCN. This work provides a new strategy for the structural optimization and heterostructure construction of crystalline carbon nitride photocatalysts.

Construction of Ag/Ag2S/CdS Heterostructures through a Facile Two-Step Wet Chemical Process for Efficient Photocatalytic Hydrogen Production

We have demonstrated a two-step wet chemical approach for synthesizing ternary Ag/Ag₂S/CdS heterostructures for efficient photocatalytic hydrogen evolution. The CdS precursor concentrations and reaction temperatures are crucial in determining the efficiency of photocatalytic water splitting under visible light excitation. In addition, the effect of operational parameters (such as the pH value, sacrificial reagents, reusability, water bases, and light sources) on the photocatalytic hydrogen production of Ag/Ag₂S/CdS heterostructures was investigated. As a result, Ag/Ag₂S/CdS heterostructures exhibited a 3.1-fold enhancement in photocatalytic activities compared to bare CdS nanoparticles. Furthermore, the combination of Ag, Ag₂S, and CdS can significantly enhance light absorption and facilitate the separation and transport of photogenerated carriers through the surface plasma resonance (SPR) effect. Furthermore, the Ag/Ag₂S/CdS heterostructures in seawater exhibited a pH value approximately 2.09 times higher than in de-ionized water without an adjusted pH value under visible light excitation. The ternary Ag/Ag₂S/CdS heterostructures provide new potential for designing efficient and stable photocatalysts for photocatalytic hydrogen evolution.

An Insight into Carbon Nanomaterial-Based Photocatalytic Water Splitting for Green Hydrogen Production

At present, the energy shortage and environmental pollution are the burning global issues. For centuries, fossil fuels have been used to meet worldwide energy demand. However, thousands of tons of greenhouse gases are released into the atmosphere when fossil fuels are burned, contributing to global warming. Therefore, green energy must replace fossil fuels, and hydrogen is a prime choice. Photocatalytic water splitting (PWS) under solar irradiation could address energy and environmental problems. In the past decade, solar photocatalysts have been used to manufacture sustainable fuels. Scientists are working to synthesize a reliable, affordable, and light-efficient photocatalyst. Developing efficient photocatalysts for water redox reactions in suspension is a key to solar energy conversion. Semiconductor nanoparticles can be used as photocatalysts to accelerate redox reactions to generate chemical fuel or electricity. Carbon materials are substantial photocatalysts for total WS under solar irradiation due to their high activity, high stability, low cost, easy production, and structural diversity. Carbon-based materials such as graphene, graphene oxide, graphitic carbon nitride, fullerenes, carbon nanotubes, and carbon quantum dots can be used as semiconductors, photosensitizers, cocatalysts, and support materials. This review comprehensively explains how carbon-based composite materials function as photocatalytic semiconductors for hydrogen production, the water-splitting mechanism, and the chemistry of redox reactions. Also, how heteroatom doping, defects and surface functionalities, etc., can influence the efficiency of carbon photocatalysts in H2 production. The challenges faced in the PWS process and future prospects are briefly discussed.

Development of Sulfur-Doped Graphitic Carbon Nitride for Hydrogen Evolution under Visible-Light Irradiation

Developing eco-friendly strategies to produce green fuel has attracted continuous and extensive attention. In this study, a novel gas-templating method was developed to prepare 2D porous S-doped g-C₃N₄ photocatalyst through simultaneous pyrolysis of urea (main g-C₃N₄ precursor) and ammonium sulfate (sulfur source and structure promoter). Different content of ammonium sulfate was examined to find the optimal synthesis conditions and to investigate the property-governed activity. The physicochemical properties of the obtained photocatalysts were analyzed by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), scanning transmission electron microscopy (STEM), specific surface area (BET) measurement, ultraviolet-visible light diffuse reflectance spectroscopy (UV/vis DRS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectroscopy and reversed double-beam photo-acoustic spectroscopy (RDB-PAS). The as-prepared S-doped g-C₃N₄ photocatalysts were applied for photocatalytic H₂ evolution under vis irradiation. The condition-dependent activity was probed to achieve the best photocatalytic performance. It was demonstrated that ammonium sulfate played a crucial role to achieve concurrently 2D morphology, controlled nanostructure, and S-doping of g-C₃N₄ in a one-pot process. The 2D nanoporous S-doped g-C₃N₄ of crumpled lamellar-like structure with large specific surface area (73.8 m² g^-1) and improved electron-hole separation showed a remarkable H₂ generation rate, which was almost one order in magnitude higher than that of pristine g-C₃N₄. It has been found that though all properties are crucial for the overall photocatalytic performance, efficient doping is probably a key factor for high photocatalytic activity. Moreover, the photocatalysts exhibit significant stability during recycling. Accordingly, a significant potential of S-doped g-C₃N₄ has been revealed for practical use under natural solar radiation.