How fossil fuel-derived pesticides and plastics harm health, biodiversity, and the climate

MAPK/NF-κB signaling mediates atrazine-induced cardiorenal syndrome and antagonism of lycopene

Atrazine (ATZ) is the most prevalent herbicide that has been widely used in agriculture to control broadleaf weeds and improve crop yield and quality. The heavy use of ATZ has caused serious environmental pollution and toxicity to human health. Lycopene (LYC), is a carotenoid that exhibits numerous health benefits, such as prevention of cardiovascular diseases and nephropathy. However, it remains unclear that whether ATZ causes cardiorenal injury or even cardiorenal syndrome (CRS) and the beneficial role of LYC on it. To test this hypothesis, mice were treated with LYC and/or ATZ for 21 days by oral gavage. This study demonstrated that ATZ exposure caused cardiorenal morphological alterations, and several inflammatory cell infiltrations mediated by activating NF-κB signaling pathways. Interestingly, dysregulation of MAPK signaling pathways and MAPK phosphorylation caused by ATZ have been implicated in cardiorenal diseases. ATZ exposure up-regulated cardiac and renal injury associated biomarkers levels that suggested the occurrence of CRS. However, these all changes were reverted, and the phenomenon of CAR was disappeared by LYC co-treatment. Based on our findings, we postulated a novel mechanism to elucidate pesticide-induced CRS and indicated that LYC can be a preventive and therapeutic agent for treating CRS by targeting MAPK/NF-κB signaling pathways.

Phylloplane fungus Curvularia dactyloctenicola VJP08 effectively degrades commercially available PS product

Polystyrene (PS), a widely produced plastic with an extended carbon (C-C) backbone that resists microbial attack, is produced in enormous quantities throughout the World. Naturally occurring plasticizers such as plant cuticle and lignocelluloses share similar properties to synthetic plastics such as hydrophobicity, structural complexity, and higher recalcitrance to degradation. In due course of time, phytopathogenic fungi have evolved strategies to overcome these limitations and utilize lignocellulosic waste for their nutrition. The present investigation focuses on the utilization of phylloplane fungus, Curvularia dactyloctenicola VJP08 towards its ability to colonize and degrade commercially available PS lids. The fungus was observed to densely grow onto PS samples over an incubation period of 30 days. The morphological changes showcased extensive fungal growth with mycelial imbrication invading the PS surface for carbon extraction leading to the appearance of cracks and holes in the PS surface. It was further confirmed by EDS analysis which indicated that carbon was extracted from PS for the fungal growth. Further, 3.57% decrease in the weight, 8.8% decrease in the thickness and 2 °C decrease in the glass transition temperature (Tg) confirmed alterations in the structural integrity of PS samples by the fungal action. GC-MS/MS analysis of the treated PS samples also showed significant decrease in the concentration of benzene and associated aromatic derivatives confirming the degradation of PS samples and subsequent utilization of generated by-products by the fungus for growth. Overall, the present study confirmed the degradation and utilization of commercially available PS samples by phylloplane fungus C. dactyloctenicola VJP08. These findings establish a clear cross-assessment of the phylloplane fungi for their prospective use in the development of degradation strategies of synthetic plastics.

Green Synthesis of Cation Exchange Membranes: A Review

Cation exchange membranes (CEMs) play a significant role in the transition to a more sustainable/green society. They are important components for applications such as water electrolysis, artificial photosynthesis, electrodialysis and fuel cells. Their synthesis, however, is far from being sustainable, affecting safety, health and the environment. This review discusses and evaluates the possibilities of synthesizing CEMs that are more sustainable and green. First, the concepts of green and sustainable chemistry are discussed. Subsequently, this review discusses the fabrication of conventional perfluorinated CEMs and how they violate the green/sustainability principles, eventually leading to environmental and health incidents. Furthermore, the synthesis of green CEMs is presented by dividing the synthesis into three parts: sulfonation, material selection and solvent selection. Innovations in using gaseous SO3 or gas-liquid interfacial plasma technology can make the sulfonation process more sustainable. Regarding the selection of polymers, chitosan, cellulose, polylactic acid, alginate, carrageenan and cellulose are promising alternatives to fossil fuel-based polymers. Finally, water is the most sustainable solvent and many biopolymers are soluble in it. For other polymers, there are a limited number of studies using green solvents. Promising solvents are found back in other membrane, such as dimethyl sulfoxide, Cyrene™, Rhodiasolv® PolarClean, TamiSolve NxG and γ-valerolactone.

Plastisphere characterization in habitat of the highly endangered Shinisaurus crocodilurus: Bacterial composition, assembly, function and the comparison with surrounding environment

Plastisphere is a new niche for microorganisms that complicate the ecological effects of plastics, and may profoundly influence biodiversity and habitat conservation. The DaGuishan National Nature Reserve, one of the largest habitats of the highly endangered crocodile lizard (Shinisaurus crocodilurus), is experiencing plastic pollution without sufficient attention. Here, plastisphere collected from captive tanks of crocodile lizards in this nature reserve was characterized for the first time. Three types of plastic (PE-PP, PE1, and PE2) together with the surrounding water and soil samples, were collected, and 16S rRNA sequencing technology was used to characterize the bacterial composition. The results demonstrated that plastisphere was driven by stochastic process and had a distinct bacterial community with higher diversity than that in surrounding water (p < 0.05). Bacteria related to nitrogen and carbon cycles (Pseudomonas psychrotolerans, Methylobacterium-Methylorubrum) were more abundant in plastisphere than in water or soil (p < 0.05). More importantly, plastics recruited pathogens and those bacteria function in antibiotic resistant genes (ARGs) coding. Bacteria related to polymer degradation also proliferated in plastisphere, especially Bacillus subtilis with a fold change of 42.01. The PE2 plastisphere, which had the lowest diversity and was dominated by Methylobacterium-Methylorubrum differed from PE 1 and PE-PP plastispheres totally. Plastics' morphology and aquatic nutrient levels contributed to the heterogeneity of different plastispheres. Overall, this study demonstrated that plastispheres diversify in composition and function, affecting ecosystem services directly or indirectly. Pathogens and bacteria related to ARGs expression enriched in the plastisphere should not be ignored because they may threaten the health of crocodile lizards by increasing the risk of infection. Plastic pollution control should be included in conservation efforts for crocodile lizards. This study provides new insights into the potential impacts of plastisphere, which is important for ecological risk assessments of plastic pollution in the habitats of endangered species.

Toxicological sensitivity of protozoa to pesticides and nanomaterials: A prospect review

Protozoa are sensitive indicators of pollutant toxicity. This review presents and discusses the toxicological studies of protozoa and the toxicological conventional test species (Daphnia magna) by pesticides and nanomaterials, particularly comparing the sensitivity of through relative tolerance analysis, Z-score, and species sensitivity index. The sensitivity of different species of protozoa varies greatly. The protozoa Paramecium sp. and Tetrahymena sp. are not sensitive species; conversely, Urostyla sp. is sensitive to dimethoate and nanomaterials Ag-NPs, respectively ZnO-NPs, and CuO-NPs, fits the use as an indicator species on these substances. The prospects to explore scientific toxicity exposure protocols, expand the protozoan species examined, and screen the sensitive species under the protocols are discussed. This prospect review advances the knowledge for including the sensitive protozoa as an indicator species in comprehensive toxicological analysis for pesticides and nanomaterials.

The regulation of endocrine-disrupting chemicals to minimize their impact on health

Endocrine-disrupting chemicals (EDCs) are substances generated by human industrial activities that are detrimental to human health through their effects on the endocrine system. The global societal and economic burden posed by EDCs is substantial. Poorly defined or unenforced policies can increase human exposure to EDCs, thereby contributing to human disease, disability and economic damage. Researchers have shown that policies and interventions implemented at both individual and government levels have the potential to reduce exposure to EDCs. This Review describes a set of evidence-based policy actions to manage, minimize or even eliminate the widespread use of these chemicals and better protect human health and society. A number of specific challenges exist: defining, identifying and prioritizing EDCs; considering the non-linear or non-monotonic properties of EDCs; accounting for EDC exposure effects that are latent and do not appear until later in life; and updating testing paradigms to reflect 'real-world' mixtures of chemicals and cumulative exposure. A sound strategy also requires partnering with health-care providers to integrate strategies to prevent EDC exposure in clinical care. Critical next steps include addressing EDCs within global policy frameworks by integrating EDC exposure prevention into emerging climate policy.

Strategic nutrient sourcing for biomanufacturing intensification

The successful design of economically viable bioprocesses can help to abate global dependence on petroleum, increase supply chain resilience, and add value to agriculture. Specifically, bioprocessing provides the opportunity to replace petrochemical production methods with biological methods and to develop novel bioproducts. Even though a vast range of chemicals can be biomanufactured, the constraints on economic viability, especially while competing with petrochemicals, are severe. There have been extensive gains in our ability to engineer microbes for improved production metrics and utilization of target carbon sources. The impact of growth medium composition on process cost and organism performance receives less attention in the literature than organism engineering efforts, with media optimization often being performed in proprietary settings. The widespread use of corn steep liquor as a nutrient source demonstrates the viability and importance of "waste" streams in biomanufacturing. There are other promising waste streams that can be used to increase the sustainability of biomanufacturing, such as the use of urea instead of fossil fuel-intensive ammonia and the use of struvite instead of contributing to the depletion of phosphate reserves. In this review, we discuss several process-specific optimizations of micronutrients that increased product titers by twofold or more. This practice of deliberate and thoughtful sourcing and adjustment of nutrients can substantially impact process metrics. Yet the mechanisms are rarely explored, making it difficult to generalize the results to other processes. In this review, we will discuss examples of nutrient sourcing and adjustment as a means of process improvement.

ONE-SENTENCE SUMMARY

The potential impact of nutrient adjustments on bioprocess performance, economics, and waste valorization is undervalued and largely undercharacterized.

Engineering Cupriavidus necator H16 for heterotrophic and autotrophic production of myo-inositol

Bioconversion of sustainable feedstocks to commodity chemicals is considered as an effective solution for transforming the fossil-based economy into a carbon-neutral model. Here, the CO₂-fixing bacterium Cupriavidus necator H16 was exploited for myo-inositol production from renewable substrates. First, by introducing the glucose transportation system, the glucose consumption route was established. Second, two key enzymes involved in myo-inositol biosynthesis were screened and evaluated. A myo-inositol-producing strain was constructed via overexpression of myo-inositol-3-phosphate synthase from Saccharomyces cerevisiae and inositol monophosphatase from Escherichia coli. Finally, carbon flux redirection was achieved through disruption of Entner-Doudoroff pathway and poly(3-hydroxybutyrate) synthesis pathway, resulting in a final myo-inositol production of 520.2, 1076.3 and 1054.8 mg/L from glucose, glycerol and CO₂, respectively. The myo-inositol production level from CO₂ achieved here set up the record. This study underlines the potential of C. necator to be utilized as microbial factory for upcycling the renewable feedstocks and CO₂ to high-value biochemicals.

Modelling and Simulation of Dissolution/Reprecipitation Technique for Low-Density Polyethene Using Solvent/Non-Solvent System

The global production and consumption of plastics have continued to increase. Plastics degrade slowly, causing persistent environmental pollution Developed waste plastic recycling methods are discussed in this report, with a focus on the dissolution/reprecipitation technique to restore low-density polyethene (LDPE) wastes. Aspen HYSYS is used to simulate the recycling of waste LDPE. Turpentine/petroleum ether (TURP/PetE) is chosen as solvent/non-solvent with fractions proved efficient through laboratory experiments. PetE is selected to be the non-solvent used for the precipitation of pure LDPE. The feedstock is assumed to be LDPE products containing additives such as dye. The simulation model developed estimated a pure LDPE precipitate recovery with a composition of 99% LDPE with a flowrate of 1024 tonnes per year. In addition, Aspen HYSYS could approximate a rough cost estimate that includes utility cost, installation cost and other factors. Technical challenges were eliminated, and several assumptions were taken into consideration to be able to simulate the process.

Electro-peroxone with solid polymer electrolytes: A novel system for degradation of plasticizers in natural effluents

Electro-peroxone (EP) reaction has been considered as a promising process for real effluent treatments. However, the use of the technology in natural water conditions is limited by low electrical conductivity and high operating costs. Herein, a novel electrochemical system was designed to overcome this constrain by coupling EP with a solid polymer electrolyte (EP-SPE). Performances of EP-SPE system were thoroughly evaluated by comparing the decomposition and energy efficiencies of various plasticizers in different systems. The EP-SPE system achieved 50% of pollutants mineralization in only 10 min with the electrolysis energy consumption of 1.0kWh·m^-3, While the conventional EP system (not) adding salt compounds (CEP-(N) AS) need 30 (60) min to reach 50% of pollutants mineralization with 3.8(26.6)kWh·m^-3. Kinetics and mechanisms of EP-SPE were investigated in detail, while electronic paramagnetic resonance (EPR) detection and kinetic model revealed the occurrence, transient concentration and degradation contribution of reactive oxidizing species (ROS). Furthermore, tests of variety of SPEs and natural waters demonstrated universal applicability of EP-SPE. Additionally, EP-SPE did not show any performance deterioration after 15 runs. Therefore, this work provides a feasible technology for plasticizer purification in natural water.

Future landscape of renewable fuel resources: Current and future conservation and utilization of main biofuel crops in China

Biofuel crops are one of the most promising regenerative alternatives of energy resources to fossil fuels. Revealing the current and future resource distribution patterns of biofuel crops will promote the development of green energies and the mitigation of greenhouse gas emissions. In this study, we first conducted a comprehensive and systematic analysis on the distribution patterns of main biofuel crops in China, using 22,352 occurrence records of 31 biofuel plant species and thirty-year environmental variables (1970-2000) with maximum entropy modeling, as well as nine-year field investigation of land use (2011-2019). The results showed that there were six different sub-regions for main biofuel crops in China, while Southwest China and South China were determined as the main concentrated potential regions. Specifically, the ranges of these regions were wider than those of current land use of main biofuel crops in China, indicating great potential for industrial cultivation. Moreover, the main biofuel crops had diverse changing patterns including increase, decrease and unstable under future climate change. Among them, biofuel crops with increase pattern (six crops) and decrease pattern (seven crops) should receive high attention for future resource utilization and production. Further field validation results confirmed that the above distribution patterns were mainly determined by increasing global temperature and precipitation. Collectively, these results will provide valuable references for the utilization and development of main biofuel resources under climate change in China, thereby shedding light on studies regarding the production of green biofuels globally.

Optimization of Propagation Medium for Enhanced Polyhydroxyalkanoate Production by Pseudomonas oleovorans

Polyhydroxyalkanoates (PHAs) represent a promising alternative to commercially used petroleum-based plastics. Pseudomonas oleovorans is a natural producer of medium-chain-length PHA (mcl-PHA) under cultivation conditions with nitrogen limitation and carbon excess. Two-step cultivation appears to be an efficient but more expensive method of PHA production. Therefore, the aim of this work was to prepare a minimal synthetic medium for maximum biomass yield and to optimize selected independent variables by response surface methodology (RSM). The highest biomass yield (1.71 ± 0.04 g/L) was achieved in the optimized medium containing 8.4 g/L glucose, 5.7 g/L sodium ammonium phosphate and 35.4 mM phosphate buffer. Under these conditions, both carbon and nitrogen sources were completely consumed after 48 h of the cultivation and the biomass yield was 1.7-fold higher than in the conventional medium recommended by the literature. This approach demonstrates the possibility of using two-stage PHA cultivation to obtain the maximum amount of biomass and PHA.

Climate Change and Obesity

Global warming and the rising prevalence of obesity are well described challenges of current mankind. Most recently, the COVID-19 pandemic arose as a new challenge. We here attempt to delineate their relationship with each other from our perspective. Global greenhouse gas emissions from the burning of fossil fuels have exponentially increased since 1950. The main contributors to such greenhouse gas emissions are manufacturing and construction, transport, residential, commercial, agriculture, and land use change and forestry, combined with an increasing global population growth from 1 billion in 1800 to 7.8 billion in 2020 along with rising obesity rates since the 1980s. The current Covid-19 pandemic has caused some decline in greenhouse gas emissions by limiting mobility globally via repetitive lockdowns. Following multiple lockdowns, there was further increase in obesity in wealthier populations, malnutrition from hunger in poor populations and death from severe infection with Covid-19 and its virus variants. There is a bidirectional relationship between adiposity and global warming. With rising atmospheric air temperatures, people typically will have less adaptive thermogenesis and become less physically active, while they are producing a higher carbon footprint. To reduce obesity rates, one should be willing to learn more about the environmental impact, how to minimize consumption of energy generating carbon dioxide and other greenhouse gas emissions, and to reduce food waste. Diets lower in meat such as a Mediterranean diet, have been estimated to reduce greenhouse gas emissions by 72%, land use by 58%, and energy consumption by 52%.

Microplastic in angling baits as a cryptic source of contamination in European freshwaters

High environmental microplastic pollution, and its largely unquantified impacts on organisms, are driving studies to assess their potential entry pathways into freshwaters. Recreational angling, where many anglers release manufactured baits into freshwater ecosystems, is a widespread activity with important socio-economic implications in Europe. It also represents a potential microplastic pathway into freshwaters that has yet to be quantified. Correspondingly, we analysed three different categories of industrially-produced baits (‘groundbait’, ‘boilies’ and ‘pellets’) for their microplastic contamination (particles 700 µm to 5 mm). From 160 samples, 28 microplastics were identified in groundbait and boilies, with a mean concentration of 17.4 (± 48.1 SD) MP kg⁻¹ and 6.78 (± 29.8 SD) mg kg⁻¹, yet no microplastics within this size range were recorded in the pellets. Microplastic concentrations significantly differed between bait categories and companies, but microplastic characteristics did not vary. There was no correlation between microplastic contamination and the number of bait ingredients, but it was positively correlated with C:N ratio, indicating a higher contamination in baits with higher proportion of plant-based ingredients. We thus reveal that bait microplastics introduced accidentally during manufacturing and/or those originating from contaminated raw ingredients might be transferred into freshwaters. However, further studies are needed to quantify the relative importance of this cryptic source of contamination and how it influences microplastic levels in wild fish.

Protocol for microplastic pollution monitoring in freshwater ecosystems: Towards a high-throughput sample processing - MICROPLASTREAM

Robust and reproducible quantification of microplastic pollution in freshwater ecosystems requires the processing of a large amount of samples collected in varying environmental conditions. Such samples are characterized by a high amount of organic matter compared to microplastics and are highly variable in terms of the quantity and the composition of matrices, requiring a standardized analytical protocol for sample treatment and analysis. However, two important and time-consuming steps for microplastic recovery are the elimination of organic matter and microscopic inspection of samples. Here, we developed and validated a protocol, targeting particles with length ranging from 700 µm to 5 mm, that includes a double-step digestion of organic matter, consisting of incubation with potassium hydroxide followed by hydrogen peroxide solutions, and two stereomicroscopic analyses. In addition, we developed several technical improvements allowing reducing the time needed to process samples, such as the design of an adapted filter-cap to improve the content transfer. The absence of physical and chemical alterations in the investigated microplastic pellets and the average reduction of 65.8% (± 9.59 SD) of organic matter in real samples demonstrated that our protocol is fit for purpose. We recommend a second stereomicroscopic analysis to avoid underestimating microplastic concentration and particle size distribution biased towards larger particles. When used for a large-scale monitoring of microplastic pollution, this protocol resulted in an estimated time of 38 h for one person for the treatment of a batch of 24 samples, allowing a higher throughput sample processing and reproducible quantification. • Protocol customization towards high-throughput sample processing • Double step digestion to improve organic matter elimination • Importance of stereomicroscopic analysis for microplastic recovery.